Commit Graph
1478 Commits
Author SHA1 Message Date
Claude 807fe91724 Gap 19: ODT tables keep header rows only where they repeat
Found with LibreOffice's agenda templates. Saving wrote a table's first
row as `table:table-header-rows`, which LibreOffice repeats at the top
of each page, so a table crossing a page showed its first row twice
("<bring>" twice). The cause: the flow model marks a first row as a
header when the table style's look has a header row, which Word's look
has by default. That only affects the style's formatting, and HTML and
Markdown still rely on it for heading cells.

- The flow table now carries how many rows repeat
  (`TableExtra::header_rows`, Word's Repeat as header row).
- The ODT writer writes only those rows as header rows.
- That extra block is now always kept for ODT flows, where it had been
  dropped from tables without an alignment, width or row height.

All 16 agenda templates now round-trip with their text the same; the
modern and simple ones fall from about 5,200 differing pixels to 145.
Across the corpus, documents with the same text after a round trip rise
from 75 to 91 of 125, and the round-trip difference falls from 82k to
60k pixels.

gaps.md row 19 and the ROADMAP log are updated.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01GBVQLyDnrG8Tn1yDQcUabC
2026-11-02 16:11:20 +00:00
41d46625e0 DOCX: VML horizontal rules take their line (#3956)
* DOCX: VML horizontal rules take their line

A web page's <hr> pasted into Word is a VML rule: `v:rect` with
`o:hr="t"`, often `width:0`. WordCraft took the width as written and
drew a 1 pt dot where Word draws a line across the page.

Measured on Word with a synthetic document: a rule with no width and
no `o:hrpct` spans the line inside the paragraph's indents; `o:hrpct`
is a share of it in tenths of a percent (500 = half); `o:hrpct="0"`
keeps the shape's own width; `o:hralign` places a shorter one (left,
centre, right); `fillcolor` and `stroked` apply as to any VML shape.
WordCraft now matches each case within 0.1 pt.

- wordcraft-doc: ShapeExtra::hr (HorizontalRule: share, alignment,
  Word's standard look).
- wordcraft-docx: `o:hr`, `o:hrpct`, `o:hralign`, `o:hrstd` read; a rule
  is written back as the same VML rule (DrawingML has none), and Word
  opens the re-saved file with the same lines.
- wordcraft-layout: a rule takes its whole line and is drawn at its
  share; measured for a table column it asks for no width, so it
  follows its column. (Word draws a rule in a cell at the page's text
  width, centred on the cell and past its edges; it stays in the cell
  here.)

docs/file-format-parity.md is updated.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* Horizontal rules: only an inline, shown rule is one

Review: the rule arm of the writer ignored the shape's placement, so a
rule imported with position:absolute or visibility:hidden came back
inline and visible. Only a rule in the text and shown is read as a rule
now (a pasted <hr> is one); a positioned or hidden one stays a plain
shape, which keeps both when saved. The writer checks the same.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* Horizontal rules: a see-through fill is kept; column measuring asks for the right width

Review: `write_hr` wrote only the fill's colour, so a rule with `v:fill
opacity` came back opaque after a save; the opacity now goes back as `v:fill`.

Review: measured for a table column, every rule asked for no width, so one of
its own width (`o:hrpct="0"`) could end up clipped by a narrow column; it now
asks for its width. AutoFit to contents measures on a line of its own width
that the rule took for a real line, so a rule sharing its line made the
column as wide as it could go; any measuring width now counts.

`Placed::Shape` boxes its extras: with the rule, `Placed` went past clippy's
large_enum_variant limit.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* Horizontal rules: placed in what the line has left; rotation and flips kept on save

Review: a whole-line rule ignores a first-line indent or a line narrowed by a
float. Measured in Word, it does too: the width stays the share of the
paragraph's width and the rule runs past the margin, or under a float on its
right. What did differ was the placement: Word centres and right-aligns a rule
in what the line has left, with a first-line indent moving the end of that room
along, and a right-aligned rule beside a float was drawn off the page here. The
display now places it that way (`ParaLayout::rule_room`).

Review: a save dropped a rule's rotation and flips; they now go back in its
style, as Word writes them.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* docs: VML horizontal-rule revision row at the top of the history

---------

Co-authored-by: Daniele Mori <Dinasty@hotmail.it>
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
Co-authored-by: Brandon Thomas <echelon@gmail.com>
2026-11-02 10:55:20 -05:00
Fin WarmanandBrandon Thomas 4f2d0da04c Shapes: align soft-edge paint and caret opacity (#1600)
* Shapes: a solid fill keeps its transparency

A shape's fill colour can carry a:alpha, its opacity. WordCraft dropped
it, so a translucent white wash laid over a picture was drawn opaque and
hid the picture. The transparency is now read into the shape, drawn on
screen and in the PDF, and written back.

* Fix #1600 freeform and soft-edge fill opacity

* #1600: wrap canonical caret sampler signature

* #1600: format canonical integration

* #1600: assert canonical DOCX alpha round-trip

* #1600: document canonical shape opacity API

* Adapt alpha fixture to rectangle render bounds

* docs: one file-format-parity row for soft-edge fill opacity, status line

---------

Co-authored-by: Brandon Thomas <echelon@gmail.com>
2026-11-02 10:53:00 -05:00
Claude be2666da15 Gap 19: ODT padding without a border, unequal columns, column breaks
Found with LibreOffice's report templates and one-page résumé.

Padding without a border:
- LibreOffice gives a paragraph's padding room on every side, with or
  without a border; measured, 0.5 in of padding and no border moves the
  text 0.5 in in and down. WordCraft dropped it.
- The reader now keeps it (an invisible border holding the space; a new
  `Borders::takes_room()`), and the writer writes it back.
- The layout adds it to the spacing or indent under the document
  setting, now renamed `Settings::odf_layout` to cover all of
  LibreOffice's layout rules. `ResolvedPara::padding` carries it, so
  Word documents are unchanged.

Columns:
- Unequal columns (`style:column` relative widths and indents, on pages
  and sections) were made equal. They now keep their widths and are
  written back as shares. The writer leaves out `fo:column-gap` beside
  them, because LibreOffice ignores a page's column widths when a gap is
  stated (checked).
- Columns with no stated gap have none, where they had Word's 0.5 in.
- A paragraph starting a column (`fo:break-before="column"`) now starts
  with Word's column break, written back on the paragraph.

The report templates round-trip to 0-11 differing pixels (from up to
9,600), and the résumé to 24 (from 6,286) with its text the same.
Across the corpus the round-trip difference falls from 155k to 82k
pixels. WordCraft's own rendering difference falls from 469k to 428k,
and no document gets worse.

gaps.md row 19 and the ROADMAP log are updated.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01GBVQLyDnrG8Tn1yDQcUabC
2026-11-02 15:39:32 +00:00
Claude 959770fa13 Gap 19: ODT lines of only pictures are as tall as the pictures
LibreOffice sizes a line holding only in-line pictures by the pictures
alone. Its font's ascent and descent don't count: measured in
LibreOffice, a 3.6 pt rule's line is 3.6 pt, where WordCraft (following
Word) made it 15.5 pt.

- A new document setting, `Settings::object_lines_fit_objects`, makes
  the layout size such lines by the pictures alone. The ODT reader turns
  it on, so other documents keep Word's layout. An equation or any text
  on the line keeps the font's height.
- A document with no page layout at all (no styles.xml) opened on Word's
  Letter page with 1 inch margins. It now uses the region's paper with
  LibreOffice's 2 cm margins.

WordCraft's own rendering of LibreOffice's elegant agenda comes close to
LibreOffice's: its pixel difference halves, from 17,428 to about 8,950.
Across the corpus WordCraft's rendering difference falls from 487k to
469k. No document gets worse, and round trips are unchanged.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01GBVQLyDnrG8Tn1yDQcUabC
2026-11-02 14:51:51 +00:00
Claude adfcbcbf7c Gap 19: ODT pictures alone in a paragraph keep its size and their raise
Found with LibreOffice's elegant agenda:
- Paragraph size: a paragraph holding only pictures lost its own font
  size, since the flow model's picture runs carry no formatting, so its
  line grew. Such a paragraph (`Para::textless`) now keeps its formatting
  as the paragraph mark's, which its pictures' runs take too. Read and
  written as for empty paragraphs.
- Raise: an in-line frame's raise was dropped when a parent style gave
  it a relation no in-line frame has (the Graphics style's
  `style:vertical-rel="paragraph"`). It is now measured from the baseline,
  as LibreOffice reads it.

The agenda's round-trip difference falls from 6,542 to 1,331 pixels, and
two business fax templates' from about 5,300 to 270 and 350. Across the
corpus it falls from 185k to 155k. No document changes page count.
WordCraft's own rendering of a picture-only line is still taller than
LibreOffice's, a layout difference left for later.

gaps.md row 19 and the ROADMAP log are updated.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01GBVQLyDnrG8Tn1yDQcUabC
2026-11-02 14:07:54 +00:00
Claude 8f65b867c0 Gap 19: ODT tables fit the margins and keep their spacing; header spacing kept
Found with LibreOffice's report templates.

Tables:
- A table filling the margins (`table:align="margins"`) but wider than
  them ran off the page. It is now fitted to the text width, its columns
  in proportion. Checked in LibreOffice, which fits such a table with or
  without relative column widths; the old test's claim otherwise is
  corrected.
- A table's own space above and below (`fo:margin-top` and
  `fo:margin-bottom` on the table) was dropped. It is now read into new
  `TableProps::space_before`/`space_after`, laid out (added to the
  spacing of the paragraphs around it, as LibreOffice does) and written
  back.

Headers and footers:
- A header taller than its band lost its spacing from the body, moving
  the text up. LibreOffice keeps the spacing below the content unless it
  is dynamic (`style:dynamic-spacing`, which behaves as Word does). New
  `SectionProps::header_gap`/`footer_gap` hold it. The layout keeps it
  past a tall header or footer, and the writer writes it back. Word keeps
  no gap, so DOCX documents are unchanged.

Across the 125-document corpus, the round-trip pixel difference falls
from 241k to 185k, and WordCraft's own rendering's difference from
LibreOffice's falls from 562k to 484k. No document changes page count or
gets worse; one report template falls from 7,646 to 602 pixels.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01GBVQLyDnrG8Tn1yDQcUabC
2026-11-02 13:38:36 +00:00
Claude 2f08e8bb01 Gap 19: ODT frames take their anchor and place from their style
A frame that doesn't state its anchor or position now takes them from
its graphic style chain (ODF lets `style:graphic-properties` carry
`text:anchor-type`, `svg:x` and `svg:y`).

LibreOffice's business card template relies on this:
- its Labels style holds the card in line;
- its Graphics style puts the credit at the top of the page.

WordCraft had floated the card, so a save scrambled the layout and added
a page.

Across the 125-document corpus, no document now changes page count
through a save (3 did), and the round-trip pixel difference falls from
333k to 241k. gaps.md row 19 and the ROADMAP log are updated.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01GBVQLyDnrG8Tn1yDQcUabC
2026-11-02 12:51:36 +00:00
Claude 3164c33c28 Gap 19: ODT letters keep one page: default size, page frames, box styles, empty lines
Saving LibreOffice's letter and fax templates added a page and moved
their logos. Fixes:
- Default font size: the writer always wrote the default style's size as
  12 pt. It now writes Normal's size (11 pt in these letters).
- Page-anchored frames: a frame placed "from the paragraph" was moved by
  the page margin. A page has no paragraph, so it is now placed from the
  page, and "from the paragraph's content" from the page's text area, as
  LibreOffice places it.
- Text box styles: a custom style used only by paragraphs in text boxes
  (the fax's centred "Frame contents") was dropped. The style pass now
  walks text boxes and groups.
- Empty paragraphs: an empty paragraph's own font size (its height) was
  dropped. It is now kept as the paragraph mark's formatting, a new
  field in the shared flow model that the ODT reader and writer use.

The marine, fax and bottle letters keep one page after a save. Over the
125-document corpus the round-trip pixel difference falls from 408k to
333k, and the business letters' differences roughly halve.

Also moved a doc comment that 48c60a5 left on the wrong function.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01GBVQLyDnrG8Tn1yDQcUabC
2026-11-02 12:05:17 +00:00
Claude 6a62c6142f Gap 19: docs: variables, emphasis marks, page backgrounds, tables, default size
gaps.md row 19 now lists what's left in ODT:
- turned characters;
- conditional text;
- control looks;
- embedded spreadsheets' contents;
- dates in non-US locales.
The ROADMAP progress log has the entry.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01GBVQLyDnrG8Tn1yDQcUabC
2026-11-02 11:09:38 +00:00
Claude 48c60a51b1 Gap 19: ODT default font size; dates in the locale's order
- The document's default font size (`fo:font-size` in
  `style:default-style`, or the Standard style's: the document's
  defaults) was ignored, leaving 12 pt; LibreOffice's letters are
  10 pt. It is now the document's default. A named style with no parent
  keeps the default style's size, as ODF inherits it.
- A date style ordered by the locale (`number:automatic-order`) showed
  its parts as listed: "2026November2". It now shows in US English
  order: "November 2, 2026", or "11/2/2026" with a numeric month, as
  LibreOffice shows it here.

WordCraft's own rendering of LibreOffice's letter templates comes much
closer: one letter goes from 11,377 to 6,237 differing pixels.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01GBVQLyDnrG8Tn1yDQcUabC
2026-11-02 11:09:20 +00:00
Claude 7be387dabc Gap 19: ODT page background pictures
A page layout's background picture (`style:background-image`, §17.3:
LibreOffice's report templates' world map) was dropped. It is now
WordCraft's page picture (Design › Page Color › Fill Effects) and is
written back with its picture:
- repeated: tiled;
- stretched: stretched;
- not repeated: centred at its own size, a new fill that the screen
  renderer and PDF export draw in the middle of the page. DOCX writes
  it stretched, as VML has no centred fill.

LibreOffice's report template with the map goes from 11,719 to 3,602
differing pixels, and shows the map after a save.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01GBVQLyDnrG8Tn1yDQcUabC
2026-11-02 10:36:41 +00:00
Claude 5cdf2608bf Gap 19: ODT tables fixed layout and starting a page; a page break before a table's first row moves it
- A table starting a page (`fo:break-before="page"` on the table,
  LibreOffice's agenda minutes) didn't. Its first paragraph now has a
  page break before it, and it is written back on the table.
- Layout: a page break before the paragraph in a table's first row
  now moves the whole table to the next page, as Word does. It was
  ignored; this matters for Word documents too.
- ODT tables are now fixed layout (Word's `w:tblLayout`).
  LibreOffice's columns never fit their content.

LibreOffice's 6orange agenda now round-trips with the same text.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01GBVQLyDnrG8Tn1yDQcUabC
2026-11-02 10:08:59 +00:00
Claude 078945e10c Emphasis marks: modelled, drawn, set, and kept in DOCX and ODT
Word's Font › Emphasis mark (a mark over or under each character, used
to stress East Asian text) wasn't modelled. DOCX `w:em` and ODT
`style:text-emphasize` were dropped.
- Model: `CharProps::emphasis` (dot, comma, circle, dot below, or none
  to turn off a style's).
- Layout: a mark is drawn over (or under) each character, and the line
  is made taller to fit it.
- `format.emphasisMark {"mark": …}` sets it, and Format state reports
  it. The catalog lists it under Home › Font.
- DOCX: `w:em` is read, and written in its place in `w:rPr` (after
  `w:cs`, before `w:lang`).
- ODT: `style:text-emphasize` maps to it: an accent is the comma, a
  disc the dot, a dot below the under-dot.

Also fixes two problems from the previous commit (ODT variables):
- Field updates blanked a SET field's stored result. The layout
  already draws nothing for SET, so its result stays as it was, as
  `ask_and_set_fields_draw_nothing` pins.
- A clippy lint (manual char comparison) failed.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01GBVQLyDnrG8Tn1yDQcUabC
2026-11-02 09:46:23 +00:00
Martin BallandClaude Opus 5.5 72327bdd36 CP4.4: pin language-packs-1 index
craft-i18n's first Language pack release is published
(https://github.com/storytold/craft-i18n/releases/tag/language-packs-1, 61 packs,
built from craft-i18n main 4504e288). PACK_INDEX now pins its index.json sha256
instead of the all-zero placeholder. Docs say which languages it covers and which
wait on craft-proof (compounding) or are excluded on licence grounds.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01FypgCX8LsYYE8fsj4byBm2
2026-11-02 09:40:07 +00:00
Claude 56188b97f4 Gap 19: ODT variables as SET/REF fields; SET evaluated; character styles keep what they turn off
- ODT variables (`text:variable-set`, `text:variable-get`, §7.4) were
  read as their text. A set is now Word's SET field, followed by a REF
  when it is displayed; a get is a REF. They are written back declared
  (`text:variable-decls`), the sets hidden with a get after them.
- The engine now evaluates SET (ECMA-376 §17.16.5.58). It shows
  nothing and gives its name a value. REF to a name no bookmark has
  shows that value; a REF before the SET shows the last value set, as
  Word's bookmark does after an update. This works for Word documents
  too.
- Custom character styles now keep what they turn off under a parent
  that turns it on (`fo:font-weight="normal"`…), as paragraph styles
  already do.

A LibreOffice document with variables round-trips with the same text,
and the saved file validates against the schema.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01GBVQLyDnrG8Tn1yDQcUabC
2026-11-02 08:37:37 +00:00
Claude bc5d9f9fa5 Gap 19: docs: ODT checked against LibreOffice's own templates
gaps.md row 19 now lists what's left in ODT after the template work:
- emphasis marks and turned characters, which have no WordCraft model;
- variable fields;
- control looks;
- embedded spreadsheets' contents;
- tables wider than the margins;
- what a character style turns off.
The ROADMAP progress log has the entry.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01GBVQLyDnrG8Tn1yDQcUabC
2026-11-02 08:02:33 +00:00
Claude e2b439ed17 Gap 19: ODT metafile pictures, pictures in text boxes, styles that turn things off
More from LibreOffice's bundled templates:
- WMF and EMF pictures (LibreOffice's fax and letter logos) were
  dropped. They now open as pictures, at their own size (a placeable
  WMF's or an EMF's frame) when the frame gives none, and are saved
  with their media types.
- A floating picture inside a text box, saved by WordCraft, didn't
  show in LibreOffice. Picture frames' styles now derive from the
  Graphics style (declared, like Frame), which LibreOffice needs to
  show it.
- A named paragraph style turning off its parent's bold (agenda
  dates under bold titles) showed bold, both in WordCraft and in
  LibreOffice after a save. What a style turns off (bold, italic,
  underline, strike-through) is now kept and written.
- Columns' shares (`style:rel-column-width`) are now written only for
  tables filling the margins. LibreOffice lays out an aligned table
  oddly with them: WordCraft's sample table lost its proportions.
- Drawings waiting for a paragraph now join only a paragraph of the
  text itself, never one in a text box or note.

With the harness's paper setting fixed (it had made LibreOffice draw
unsized pages as Letter), most of the 78 templates compare much closer
page by page. The CV template and the contour sample are now
pixel-identical.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01GBVQLyDnrG8Tn1yDQcUabC
2026-11-02 08:02:11 +00:00
Claude 1dd4e64191 Gap 19: ODT page margins default as LibreOffice's; loose drawings join a paragraph
More fixes from LibreOffice's bundled templates:
- A page margin the file leaves unsaid was 1 in, and a page layout with
  no properties at all was ignored. Both now take LibreOffice's
  defaults: 2 cm margins (observed black-box). LibreOffice's CV template
  now lays out as LibreOffice draws it.
- Drawings anchored outside any paragraph (LibreOffice's
  page-anchored frames before the first paragraph) made a paragraph of
  their own. That paragraph started the document on the default page
  style rather than the one the first paragraph asks for, which put the
  running header on a letter's first page and pushed the letter onto
  two pages. They now join the next paragraph; before a table or at the
  end, they still get a paragraph of their own.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01GBVQLyDnrG8Tn1yDQcUabC
2026-11-02 07:03:12 +00:00
Claude ab02c85701 Gap 19: ODT fixes found by round-tripping LibreOffice's own templates
LibreOffice ships 78 text templates (letters, faxes, agendas, reports,
CVs). Round-tripping them through WordCraft exposed these problems:
- Placeholders (`text:placeholder`, "<Recipient's name>") were
  printed text. They now open as plain-text content controls showing
  them, so a click selects one and typing replaces it. Their
  description becomes the control's title. They are written back as
  placeholders of their type while they still show; what was typed is
  written as text.
- A fixed date with neither a value nor text was lost. It is now a date
  field.
- `text:author-name` opens as USERNAME, which the engine left empty.
  USERNAME and USERINITIALS now show the user's name and initials
  from File › Options; a quoted text after the name is shown instead.
- A "First Page" master followed by another (`style:next-style-name`)
  put the running header on the first page. It is now a section with a
  different first page: its own (empty) header on page 1, the next
  master's after that.
- A page layout without a size was Letter. It is now the default
  page's, the user's region's, as LibreOffice uses its default paper.
  ODT import takes the regional page like the other importers.
- Style-only templates (no `content.xml`) failed to open. They now
  open empty with their styles.
- Table columns are now written with their share of the table
  (`style:rel-column-width`) too. A table filling the margins of a
  narrower page keeps its proportions in LibreOffice.

All 78 templates now open and round-trip.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01GBVQLyDnrG8Tn1yDQcUabC
2026-11-02 06:36:36 +00:00
NaxvogandClaude Opus 5.5 89c0d516ae Files: documents keep their embedded alternative format chunks, and MHT opens
Word brings a document's alternative format chunks (w:altChunk) in where they
stand when it opens the file; WordCraft left them out, so a document made of
one (as generators and mail-merge tools write them) opened empty.

- docx: read_with/ReadOptions with a ChunkImporter for formats other than
  WordprocessingML; nested Word documents are read here (at most 4 deep,
  256 chunks and 512 MB of chunk bytes a file, XML depth counted on).
- doc: Document::adopt (moved from paste) brings another document's media,
  lists, styles, notes, comments and revisions along under new ids; pictures
  in groups and charts are relinked. Insert > Text from File uses it and now
  keeps the file's pictures and lists.
- engine: chunks in MHT, HTML (in their charset), RTF and plain text go
  through the format importers.
- formats: MHT web archives open (MIME, quoted-printable/base64, charsets,
  pictures by Content-Location or cid). HTML reads style element rules
  (simple selectors, cascade, budgets), paragraph margins, indents, line
  height, cell widths and borders; an opened page takes Word's web-page
  defaults (Times New Roman 12 pt, single lines, black headings, automatic
  spacing). html::decode knows the single-byte Windows code pages.

docxide-pdf suite: croatian_regulations_altchunk goes from one empty page to
Word's 8 pages, SSIM 2.7% -> 78.7%; no other document changes.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-11-02 07:04:31 +01:00
Claude 7848757954 Gap 19: ODT hidden form controls kept; .ott templates opened and saved
- Hidden form controls (`form:hidden`: a name and value the form sends,
  not shown) were dropped. They are now kept verbatim, with their
  properties, and written back into the form with ids of their own.
- OpenDocument text templates (`.ott`) weren't opened. They now open
  as documents, and save as templates: the template's media type goes
  in `mimetype` and in the manifest's root entry (ODF 1.3 Part 2 §3.3).
  This works with a password too. `.ott` is listed wherever `.odt` is:
  open and save formats, file dialogs, export, the web app and its
  media type.

A LibreOffice template round-trips with the same text. 300 fuzzed
documents exercising custom shapes, cell formulas, kept parts, turned
text and forms caused no crashes.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01GBVQLyDnrG8Tn1yDQcUabC
2026-11-02 05:49:16 +00:00
ReesandBrandon Thomas bf9e9fb8ae DOCX: keep alternate-content table rows and cells (#5221)
* Fix #5219: retain alternate-content table rows and cells

* Re-wrap the collect() doc comment

---------

Co-authored-by: Brandon Thomas <echelon@gmail.com>
2026-11-01 23:17:19 -05:00
Martin BallandClaude Opus 5.5 1146691b90 CP4.3: review — craft-libs at #485 f88bd48 / #486 83c2e7b; test-source warning in proof.packs, the CLI and the bar; About › Language data a fixed-height list; Cancel reaches a stalled download
- proof.packs reports index_override; the CLI prints the test source; the bar's Install tooltip
  says it turns on downloading of fonts and Language packs, and names a test source.
- Docs: Install works once language-packs-1 is published (until then only a test index); with a
  test index the sha256 only catches a broken download.
- About › Language data keeps its size: a fixed-height scrolling list, licence texts read again
  only when the dictionaries change.
- The engine's Cancel is the font store's own flag (no snapshot), so a cancel stops a fetch or a
  stalled download too.
- Index text shown without control, bidi or format characters; long names cut; the bar works out
  what to offer again when the list changes (index generation, not its length).
- ui_shot's store is a temporary folder (or storeDir); tests reset the backend even on panic; a
  fixture pack proves per-run proofing and hyphenation from a pack.
- The default-build check follows craft-proof's carry-over (de, pl, pt, it, ru embedded until packs
  ship; CRAFT_PROOF_EMBED=en is English only); the Polish hyphenation check runs again.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01FypgCX8LsYYE8fsj4byBm2
2026-11-02 01:04:00 +00:00
Martin BallandClaude Opus 5.5 c1490c5ba9 CP4.3: review — a click from the control channel never turns on downloading; installs and refreshes run in the background in the app; parked documents proof again after a pack change
- Install, Show available languages and Refresh turn on the font store's downloading only on the
  person's own click (input_from_control, as in #959); a faked click says why instead.
- proof.installPack and proof.packs {refresh} run on the engine's thread in the app ("started"),
  with progress, results and errors in proof.packs; the CLI and headless MCP stay synchronous.
- A session's layout is keyed on the dictionaries' generation, so parked documents proof again.
- proof.removePack refuses while that pack installs; pack commands that need a locale are left out
  of Search; options text names Refresh; licence tooltip says Source; errors go through tl!;
  the bar rescans at most once a second while typing; English names for every pack language and
  sr-latn; About has one Close button; xtask doc comment back on cmd_i18n_report.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01FypgCX8LsYYE8fsj4byBm2
2026-11-02 01:04:00 +00:00
Martin BallandClaude Opus 5.5 2ef046bad9 CP4.3: craft-libs pinned to Lane 4's pushed heads; test-source warning, upstream source links, code-drawn bar close button
- craft-proof (benandez/craft-libs 6ae4f03, storytold/craft-libs#485) and craft-font-store /
  craft-font-catalog (630e42f, #486) by git rev instead of local paths.
- ProofLang::Pack: the bar offers every language with a pack (zxx/und never).
- Options › Language warns when CRAFT_LANGUAGE_PACK_INDEX supplies a test index.
- Pack `source` (upstream link) when the index gives it, else the archive.
- The bar's close button is the code-drawn close icon: "✕" had no glyph in the interface fonts
  and egui panicked drawing it.
- `cargo xtask language` allows our own ru-extra, which stays embedded.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01FypgCX8LsYYE8fsj4byBm2
2026-11-02 01:03:59 +00:00
Martin BallandClaude Opus 5.5 e5d46bb242 CP4.3: Language packs: proof.packs, proof.installPack, proof.removePack; Options › Language list, missing-pack bar, About › Language data
- engine `packs`: the packs Backend (the font store on the desktop and CLI, a fixed list in tests
  and ui_shot), the pinned index, installs and removals through craft-font-store's
  `language-pack` kind, craft-proof reading the store's `language-packs/` folder at once.
  Commands open nothing and never turn downloading on (only an Install click in the app does);
  confined automation can't write the packs folder outside its write root.
- ui-egui `language_packs`: File › Options › Language › Language packs (name, size, licence,
  source, Install/Remove, progress, errors), the missing-pack bar (dismissible per document,
  never for a language without a pack), About › Language data (full licence texts).
- CP4.4: `cargo xtask language` (in `ci`): the default build embeds only en-* Language data.
- CP4.5: docs (help, MCP, control protocol, gaps #8, localization parity, roadmap).
- Path deps to Lane 4's worktrees while developing.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01FypgCX8LsYYE8fsj4byBm2
2026-11-02 01:03:59 +00:00
Martin BallandClaude Opus 5.5 9ffd30d968 CP2.3: review — NOTICE carries the SCOWL, Titze and Ispell notices; gap 8 records SCOWL English; status lines for localization-tr and architecture
CodeRabbit on #5205:
- NOTICE: the SCOWL English dictionaries (en_US, en_GB-ise, en_CA) with
  Kevin Atkinson's SCOWLv2 notice, Benjamin Titze's notice and Geoff
  Kuenning's Ispell BSD licence for the affix files, as their licences ask of
  distributions.
- docs/gaps.md: gap 8's evidence says each English checks its own SCOWL
  2026 dictionary, with the #40 and #520 regression tests; #40 (closed) is no
  longer listed as open. Status line and revision history.

Also: docs/localization-tr.md's craft-proof path change (3110dcf02, #5202)
and docs/architecture.md's no-data wording (b7dad64d9) get their status lines
and revision rows.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01FypgCX8LsYYE8fsj4byBm2
2026-11-02 00:39:15 +00:00
Martin BallandClaude Opus 5.5 211377f550 CP2.3: review — pin craft-proof to craft-libs#483's review fixes (each English checks its own SCOWL dictionary) and craft-i18n to #114's merge
craft-proof moves to 0675d58: an English no longer takes another English's
SCOWL words (en-US flagged colourblind, en-GB colorblind), British English
keeps -ize, and English suggestions drop junk splits and names.
craft-i18n.rev and the Flatpak source move to storytold/craft-i18n#114's merge
commit (059cbf9: judgment/judgement right in every English).
No wordcraft test depended on the dialects crossing
(engine 1120 + 43, layout 578 pass). localization-parity's English row says so.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01FypgCX8LsYYE8fsj4byBm2
2026-11-02 00:31:38 +00:00
Martin BallandClaude Opus 5.5 09e9522a35 CP2.3: English spelling reads SCOWL 2026; regression tests for #40, #520, #1281, #1045
craft-proof moves to storytold/craft-libs#483's head (e6e948f, on #482's
9e5862a): each English checks against its own SCOWL rel-2026.02.25 dictionary
through the affix engine (ordinals via COMPOUNDRULE), with en-variants.txt as
the dialect policy. Lookup order: dictionaries folder, [English pack], SCOWL,
system Hunspell, the built-in Moby list; Moby stays for hyphenation.
craft-i18n.rev and the Flatpak source move to storytold/craft-i18n#109's merge
commit (efb1127), which adds the SCOWL files.

Typed-text tests pin British spellings in en-GB (#40), modern words (#520),
Canadian/Australian/NZ/Indian English (#1281, #1045) and ordinals; they skip
without the Language data, as the other data tests do. Docs: typing-parity,
localization-parity, ROADMAP progress log.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01FypgCX8LsYYE8fsj4byBm2
2026-11-02 00:31:38 +00:00
Martin BallandClaude Opus 5.5 b7dad64d94 CP1.3: review — no-data proofing described right, NOTICE names craft-i18n's hyphenation.pat files, Flatpak dictionaries folder, printing checkout without credentials, data gate asks the variant table too
CodeRabbit on #5202:
- AGENTS.md, ATTRIBUTION.md, README.md, docs/architecture.md: without
  CRAFT_I18N_DIR English spelling falls back to an installed Hunspell English
  or craft-proof's built-in Moby list, and only pattern hyphenation is off
  (Bulgarian, Turkish and Russian hyphenate by rule); they said English
  wasn't spell-checked. (CLAUDE.md carries the same sentence; left for the
  maintainer, as agents don't edit it.)
- NOTICE: craft-i18n's patterns are language-data/<lang>/hyphenation.pat,
  not en-us.pat, pl.pat, pt.pat, de.pat, it.pat.
- docs/spelling-dictionaries.md: the Flatpak's dictionaries folder is
  ~/.var/app/ai.storyteller.wordcraft/data/wordcraft/dictionaries; the host's
  folders are outside its sandbox.
- printing.yml: the repository checkout doesn't persist credentials.
- tests.rs no_language_data: also probes the American/British variant table,
  so a craft-i18n checkout missing some files skips the dialect tests
  instead of failing them.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01FypgCX8LsYYE8fsj4byBm2
2026-11-02 00:31:32 +00:00
Claude ce516b04f6 Gap 19: docs: ODT fidelity re-estimated at ~90%
After custom shapes, cell formulas, kept package parts, turned text,
and control sizes and buttons: ODT is ~90% in file-format-parity (20–35
h left). gaps.md row 19 lists what's left in ODT:
- emphasis marks;
- turned characters;
- conditional and variable fields;
- hidden controls and control looks;
- embedded spreadsheets' contents.
The ROADMAP progress log has the entry.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01GBVQLyDnrG8Tn1yDQcUabC
2026-11-01 23:46:56 +00:00
Claude 693ccff3b2 Gap 19: ODT form control sizes and buttons kept
On save, form controls were sized to their text. Buttons and other
controls WordCraft has no kind for were dropped.
- Sizes: each control keeps the size of its `draw:control`
  (`svg:width`, `svg:height`), stored on the content control.
- Buttons, image buttons, labels, file and value-range controls, frames
  and generic controls now show their label, locked, as a content
  control. Their form XML is kept verbatim and written back as it was,
  so LibreOffice's button round-trips as a button.
- A kept control that names a namespace WordCraft doesn't declare is
  left out. So is one longer than 64 KiB.
- The `ooo`, `oooc`, `script` and `dom` prefixes that LibreOffice's
  controls use are declared, so the content validates.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01GBVQLyDnrG8Tn1yDQcUabC
2026-11-01 23:36:34 +00:00
Claude cb7de0227f Gap 19: ODT turned text in table cells and text boxes
Text turned down or up opened across. This covered table cells and text
boxes (`style:writing-mode` §20.404, and LibreOffice's own
`loext:writing-mode="bt-lr"` for upward text).
- Table cells now open and save with WordCraft's cell text direction.
- Text boxes now open and save with their text direction.

LibreOffice's turned cells render as LibreOffice draws them. LibreOffice
reads WordCraft's turned text boxes back identically.

Turned characters (`style:text-rotation-angle`) still open upright:
WordCraft has no turned characters.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01GBVQLyDnrG8Tn1yDQcUabC
2026-11-01 23:15:00 +00:00
Claude 2b826a288c Gap 19: ODT macros and unknown package parts kept
Package parts WordCraft doesn't read were dropped on save. These
include LibreOffice Basic macros and dialogs (`Basic/`, `Dialogs/`),
`manifest.rdf` and other applications' files. They are now kept as
they are and written back with their manifest entries. LibreOffice
finds a round-tripped document's macro intact; WordCraft never runs
macros.

Dropped on save: the old thumbnail, and digital signatures
(`META-INF/*signatures*.xml`), because they sign the package as it
was. Also dropped: paths that climb out of the package, and paths
WordCraft writes itself (pictures, embedded objects).

Kept parts are bounded: 1000 files, 64 MiB in all. They survive
password protection.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01GBVQLyDnrG8Tn1yDQcUabC
2026-11-01 23:14:59 +00:00
Claude 2036ad2e99 Gap 19: ODT table cell formulas as Word formula fields
ODT cell formulas (`table:formula`) were lost, and only their value was
kept as text.
- Reading: LibreOffice's formulas, in its own syntax
  (`ooow:sum <A1:A3>`, `<B1>*<B2>+<B3>`, `mean`, `min`, `max`,
  `product`, `abs`, `sign`, `count`, `add`/`sub`/`mul`/`div`/`pow`, lists
  joined by `|`), open as Word formula fields (`=SUM(A1:A3)`) showing
  the cell's value. Update Field recalculates them.
- Writing: formula fields in cells are written back as cell formulas
  with their value. ABOVE, LEFT, BELOW and RIGHT become the cells they
  name.
- Cells holding a plain number are written as numbers, so LibreOffice
  calculates with them. The `ooow` prefix is declared; without it,
  LibreOffice reports "Expression is faulty".

A formula one side can't say keeps its value as text. A LibreOffice
table of sums round-trips with the same text, and the saved file
validates against the schema.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01GBVQLyDnrG8Tn1yDQcUabC
2026-11-01 22:57:17 +00:00
Claude 04ff4e3a54 Gap 19: ODT custom shapes drawn from their own geometry
A custom shape whose type WordCraft has no kind for (hexagon, octagon,
smiley, can, moon, lightning, block arc, cross, pentagon, flowchart
shapes…) opened as a rectangle. It is now drawn from its own geometry
(ODF 1.3 §10.6.2) as a freeform:
- the enhanced path (§19.145): moves, lines, curves, ellipses (T, U),
  arcs (A, B, W, V) and quarter ellipses (X, Y), arcs followed in
  short straight steps;
- its values worked out from the shape's equations (§10.6.3) and
  adjustment values: numbers, other equations, modifiers, the frame's
  keywords, + - * /, abs, sqrt, sin, cos, tan, atan, atan2, min, max
  and if.
Path length, equation count and nesting, and points are all bounded.

LibreOffice fills no part of a `draw:path` that has an open part. So a
freeform with both closed and open paths is now saved as a custom shape
whose path leaves the open ones unfilled (`F`).

LibreOffice's preset shapes render as LibreOffice draws them. The
saved file validates against the schema.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01GBVQLyDnrG8Tn1yDQcUabC
2026-11-01 22:37:45 +00:00
Claude 2877514d9e Gap 19: ODT bibliography marks as citations of sources
ODT citations (`text:bibliography-mark`) were read as their text, and
the sources they carry were lost. So an ODT bibliography had nothing
to update from.
- Reading: each mark is now a `CITATION` field of its source, which
  becomes one of the document's bibliography sources (the first mark
  of an identifier gives it). The identifier is the tag, the type the
  kind, plus author, title, year, publisher, address, journal, volume,
  pages, URL, editor, edition, number and month.
- Writing: a `CITATION` of a known source is written back as a mark
  carrying the source.

References › Update rebuilds an ODT bibliography from them. A
LibreOffice citation and bibliography round-trip pixel-identical and
validate against the schema.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01GBVQLyDnrG8Tn1yDQcUabC
2026-11-01 22:13:47 +00:00
Claude 27b7f34425 Gap 19: ODT linked text boxes stay linked
Linked text boxes (`draw:chain-next-name` on a `draw:text-box`, naming
the frame its text continues in) lost their link on open. The
following box's text was gone, since only the first box holds the
story.
- Reading: each box keeps its frame name and the name of the next box.
  Once all boxes are made, names are resolved to WordCraft's link
  (`TextBody::next`). A link to a missing box, to the box itself or
  round in a loop is dropped.
- Writing: each box is named after its story, and a linked box names
  the next one.

Flow model: `BoxLook::chain` (name, next).

A LibreOffice chain round-trips pixel-identical, and WordCraft flows
the text from the first box into the second. A linked box keeps its
own height where LibreOffice grows it to the rest of the text.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01GBVQLyDnrG8Tn1yDQcUabC
2026-11-01 22:02:39 +00:00
Claude 4c0bb99016 Gap 19: ODT picture crops and contour wrapping
Two picture properties were dropped.
- Crop: `fo:clip` (top, right, bottom, left, in lengths of the
  picture's own size, its pixels at 96 per inch) is now WordCraft's
  crop fractions. A picture's crop is written back as `fo:clip`, with a
  graphic style even for an in-line picture.
- Contour wrapping: `style:wrap-contour` with
  `style:wrap-contour-mode` `outside` is Word's Tight wrapping, and
  `full` (the default) is Through. The frame's `draw:contour-polygon`
  becomes the wrap polygon, scaled from its view box. A polygon whose
  points lie well outside its view box is in another coordinate system
  (LibreOffice writes one for some pictures), so the outline is
  derived from the picture instead. All of this is written back, the
  polygon last in the frame.

A cropped LibreOffice picture round-trips pixel-identical, and a
contour-wrapped one round-trips with WordCraft wrapping text as
LibreOffice does. Both validate against the schema. `Body::start`'s
frame parts moved to a helper (clippy's complexity limit).

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01GBVQLyDnrG8Tn1yDQcUabC
2026-11-01 21:50:19 +00:00
Claude 2bc5874da0 Gap 19: docs: ODT fidelity re-estimated at ~85%
This round added flow breaks, table placement, ruby, index marks, text
borders, connectors and custom properties. A 20,000-paragraph document
round-trips in about a second with nothing lost, and 400 fuzzed
documents opened without a crash.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01GBVQLyDnrG8Tn1yDQcUabC
2026-11-01 20:38:11 +00:00
Claude 0b6b88f414 Gap 19: ODT custom document properties and user fields as DOCPROPERTY
ODT custom document properties (`meta:user-defined` in `meta.xml`) were
dropped, and the fields showing them or a user field were read as
plain text.
- Properties: `meta:user-defined` values (string, number, true/false,
  date) are now WordCraft's custom document properties, and so are
  user field declarations (`text:user-field-decl`).
- Fields: `text:user-defined` and `text:user-field-get` are Word's
  `DOCPROPERTY` fields, which WordCraft updates from those properties.
- Writing: custom properties go back into `meta.xml`, and a
  `DOCPROPERTY` naming one is written as `text:user-defined`.

A LibreOffice document with a custom property and a user field
round-trips pixel-identical, valid against the schema. Its user field
comes back as a document property.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01GBVQLyDnrG8Tn1yDQcUabC
2026-11-01 20:30:48 +00:00
Claude 3d464f3ebe Gap 19: ODT connectors read and written glued
ODT connectors (`draw:connector`) were left out. They now open as
WordCraft connectors: straight (`line`), curved (`curve`), or with
bends (`standard`, `lines`).
- Gluing: each end is glued to the shape it names (`draw:start-shape`,
  `draw:end-shape`). The shape's four default glue points (§9.2.19:
  top, right, bottom, left) become its connection sites. An end glued
  to a glue point of the shape's own, or to a shape not read, is left
  unglued.
- Placement: a connector's own coordinates are in LibreOffice's drawing
  layer, not its anchor's. So a connector glued at both ends to shapes
  anchored in its paragraph is placed between their sites.
- Writing: connectors are written back as `draw:connector` with their
  type and glue, and the shapes they glue to get ids
  (`xml:id`/`draw:id`). LibreOffice re-routes them from the glue.

LibreOffice's connector document round-trips with its connectors
drawn between the shapes, and WordCraft draws them between the right
sites. Other formats still get connectors as straight lines.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01GBVQLyDnrG8Tn1yDQcUabC
2026-11-01 20:15:27 +00:00
Martin BallandClaude Opus 5.5 c967f934ca CP1.3: review — gaps and localization-parity point at craft-proof (craft-libs) and craft-i18n language-data instead of the removed crates/proof and assets/spelling
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01FypgCX8LsYYE8fsj4byBm2
2026-11-01 20:13:12 +00:00
ccc8780b5e CP1.3: spelling-dictionaries lists WordCraft's own folder on macOS and Linux
craft-proof now searches it there too (ported from storytold/craft-libs#31).

Co-Authored-By: Michał Marcin Brzuchalski <michal.brzuchalski@gmail.com>
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01FypgCX8LsYYE8fsj4byBm2
2026-11-01 20:13:03 +00:00
Martin BallandClaude Opus 5.5 3110dcf02b CP1.3: proofing comes from craft-proof (craft-libs), its data from craft-i18n
- wordcraft-proof is now `package = "craft-proof"` from craft-libs (local
  path for now; TODO in Cargo.toml for the git+rev pin after the craft-libs
  PR merges). `wordcraft_proof::` paths are unchanged.
- crates/proof and assets/{spelling,hyphenation} deleted with their
  ATTRIBUTION.md rows; one row now points at craft-i18n's Language data;
  NOTICE paths updated.
- craft-i18n.rev (and the flatpak source) moved to the craft-i18n commit that
  adds language-data/ (CI sets CRAFT_I18N_REQUIRED=1, so the pin must have it).
- xtask layers: proof removed. Engine tests carry their own copy of the
  synthetic Czech fixture (they reached into crates/proof/src).
- Docs: architecture.md, CLAUDE.md/AGENTS.md layer table, README build note
  (CRAFT_I18N_DIR), localization-tr path, ROADMAP progress log.

Before/after wordcraft-cli on a 17-language proofing document: issues,
suggestions, manual hyphenation, PDF text and PDF bytes identical.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01FypgCX8LsYYE8fsj4byBm2
2026-11-01 20:13:03 +00:00
fd7f6621a1 Markdown export: a list inside a block quote stays in the quote (#5156)
* Markdown export: a list inside a block quote stays in the quote

`> - one / > - two` was imported as quoted list paragraphs (the quote kind on each item) but
the list branch of the exporter ignored that kind and wrote `- one / - two`, so every save as
Markdown moved the list out of its quote. A quoted list item now takes `> ` on each of its
lines, nested levels and continuation lines included. The same paragraphs come back from a
.docx (Quote style with numbering), so the quote now survives that round trip too.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* Markdown export: a list after a quoted list stays outside the quote

* fmt

---------

Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
Co-authored-by: Brandon Thomas <echelon@gmail.com>
2026-11-01 14:48:32 -05:00
8a191fbf11 Shapes: arrowheads keep their kind and size and are drawn at Word's sizes (#5192)
Word draws an arrowhead 2, 3 or 5 times the line's width long and wide
(small, medium, large; `a:headEnd`/`a:tailEnd` `len`/`w`), a line under
2 points as a 2-point one. Every arrowhead was drawn one size and saved
as a medium triangle: the kind, width and length are now read (DrawingML
and VML), kept and written back, and the size is drawn as Word does.

Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
Co-authored-by: Brandon Thomas <echelon@gmail.com>
2026-11-01 14:46:16 -05:00
499fc6289e Columns: the line between them is drawn for selected text, as tall as the section's text (#5178) (#5183)
* #5178: the line between columns is drawn for a section starting mid-page

Columns for selected text are a continuous section in the middle of a page, and
the line between columns was only added when a page started, down to the page
bottom. The lines are now drawn per section on each page, from the top of its
text there to the bottom of its tallest column, when the page or the section ends.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* #5178: the line between columns spans the text's lines, not its paragraph spacing

Review: the line started above the section's first line (its space before) and
ended below its last (its space after). It now runs from the highest text line or
table cell of the section on the page to the lowest, falling back on the flow's
extent when there are none.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* #5178: the column lines find the section's text by place, and draw nothing without it

Review: the section's items were the page's items after an index, which objects
behind the text (inserted at the front) shift; the flow's extent drew a line
where the section had only spacing; overflow lines of exact-height cells counted.
The text is now the page's top-level body lines and table cells below the
section's top; lines in cells count by their cell's box; no text, no line.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* #5178: the column lines take the section's text by its blocks

Review: a floating table of an earlier section placed lower on the page would
pass a filter by place. The section's text is now the page's items of top-level
blocks from the section's first block on the page.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

---------

Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
Co-authored-by: Brandon Thomas <echelon@gmail.com>
2026-11-01 14:39:35 -05:00
1bd71f72bc .doc import: the default font is the stylesheet's standard font, so Word 365 files open in Aptos (#5066) (#5069)
* #5066: .doc default font is the stylesheet's standard font

The .doc reader took the default character font from the font table's
first entry. A Word 365 .doc keeps Times New Roman there and names Aptos as
the stylesheet's standard font (Stshif.rgftcStandardChpStsh), so its text
came out in Times New Roman. The defaults are now the standard ASCII, East
Asian and complex-script (ftcBi) fonts, else entry 0 as before; runs'
sprmCRgFtc1 and sprmCFtcBi are read too.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* #5066: the complex-script standard font is read only when the header has it

ftcBi is optional in the Stshi, and the latent style data that follows it starts
with cbLSD (4): a header that leaves ftcBi out no longer makes cbLSD the
complex-script font.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* #5066: a header ending with ftcBi = 4 keeps it

Review: a 4 at ftcBi's offset was taken for cbLSD even when the header ends
there, so a complex-script standard font of index 4 was lost. It is read as
left out only when more data follows.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

---------

Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
Co-authored-by: Brandon Thomas <echelon@gmail.com>
2026-11-01 14:24:47 -05:00