Each listed control looked its properties part up with a scan of the sheet's relationships, so a
sheet at the 10,000-control cap compared ids a hundred million times. The relationships are
indexed by id once, as the VML shapes already were; the first of a repeated id still wins.
A button's command is refused at Insert, at Assign Action and, when a file's hidden name carries
it, at press time (file.save, file.saveAs with a path, file.open, app.commands, macro.run,
automate.runScript, control.press); nothing runs and no file is written. A slider or spin button
whose linked cell is locked on a protected sheet refuses the change through control.setValue,
Format Control and Insert, and keeps its value; a link to another sheet obeys that sheet's
protection; an unlocked linked cell takes the value.
ROADMAP.md: both headers combined (form controls first, then main's entries); the form controls progress-log and revision rows re-dated 2026-11-01 on top of main's rows; the branch's duplicate floating-objects rows dropped in favour of main's.
docs/file-format-parity.md: header combined the same way; the form controls revision row on top of main's rows.
docs/target-app-parity.md: header combined; the form controls revision row (catalog 276 / 292 -> 280 / 296) on top of main's rows; the duplicate chart-resizing row dropped in favour of main's.
docs/ui-parity.md: header combined, its catalog count set to 280 / 296; the form controls revision row on top of main's rows; the duplicate floating-objects row dropped.
crates/ui-egui/tests/it/keytips_generated.rs: regenerated with cargo xtask keytips (370 sequences).
crates/model/src/sheet.rs: the exhaustive push_object test helper and the two-of-every-kind list gained the Control kind, which main's new test module did not know.
A picture anchored to move and size with cells and spanning two rows
(or columns) was re-fitted between its top-left and bottom-right lines
after a sort. When the sort put the bottom line above the top one, the
fitted extent was negative and the picture collapsed to a zero height
or width. It now keeps its old size on that axis and travels with its
top-left line, like a "move only" picture.
Tests: for a sort by rows and one by columns, "move and size" and
"move only" pictures inside one line travel with it (the first
re-fitted to the same line, the second at its own size), an absolute
picture stays while the cells move under it, a two-line picture whose
lines swap keeps its size, and undo restores every anchor.
Sorting and row or column edits read every anchor through
`object_anchors`, compute the new ones and write them back through
`object_anchors_mut` in step. Nothing checked that the two accessors
visit the same objects in the same order; a kind of floating object
reaching only one of them would have paired objects with other objects'
anchors silently.
Test: two objects of every kind are inserted in a mixed order, each
anchor is marked with its position through the mutable accessor, the
marks are read back through the shared one in the same sequence, the
count matches the per-kind collections, and the mark is found on the
object `object_anchor` names by kind and id. The test's constructor
matches on `ObjKind` exhaustively, so a new kind does not compile until
the test covers it.
ROADMAP.md: main's header and rows kept; this branch's progress-log and revision rows re-dated 2026-11-01 on top; the Change note names both.
docs/gaps.md: main's §13 Solver rows kept; this branch's §4 row re-dated 2026-11-01 on top; the Change note names both.
docs/target-app-parity.md: main's Solver and Insert Function rows kept; this branch's chart-handles row re-dated 2026-11-01 on top; the Change note names both.
docs/ui-parity.md: main's Function Library and Esc rows kept; this branch's floating-objects row re-dated 2026-11-01 on top; the Change note names both.
* Data: Solver Load/Save Model and Reset All
data.solverSaveModel writes a model (the sheet's saved model, or one
given as data.solver params) down a column of its sheet as formulas:
the objective and goal (=MAX(...), =MIN(...) or =cell=value), the
variable cells (=COUNT(...)), one =AND(relation) per constraint, which
shows TRUE while the constraint holds, and the method and its options
as an array constant. It refuses a range that overlaps the model's
cells or runs off the sheet.
data.solverLoadModel reads such a range (or reads down from its first
cell), checks the model and makes it the active sheet's model.
data.solverReset (Reset All) removes the active sheet's model. Each is
one undo step.
The Solver Parameters dialog has Reset All and Load/Save buttons; the
dialog can also be opened with fields that go over the saved model.
* Data: Solver Reset All also clears a model read from workbook-level names
A sheet's Solver model can come from workbook-level names, which every
sheet without a model of its own reads. Reset All removed only the
sheet-level names, so such a model stayed and the dialog showed it
again.
Removing the workbook-level names would change every other sheet that
reads them. Reset All instead leaves them in place and writes an empty
sheet-level solver_opt over them on the active sheet only; the result
says masked: true. saved_model now reads a sheet's own names when the
sheet has a solver_opt, and the workbook-level names only otherwise,
never a mix of both, and treats an empty solver_opt as no model. The
mask survives XLSX and is replaced when a model is saved on the sheet.
* Data: Solver Save Model clears the rest of a longer model saved at the same cell
Saving a model over a longer one saved at the same cell left the old
model's last rows on the sheet, so Load Model from that cell read the new
options row followed by stale constraint rows and refused the range.
Save Model now clears what is left of a model saved there before (only
when those cells hold a complete model written by Save Model, and never
the new model's own cells), keeping the cells' formatting, in the same
undo step. Load Model reading down from one cell also stops at the
options row, so formulas just below a saved model no longer break it.
* Data: Solver Load Model keeps the Evolutionary convergence and generations
Save Model writes Convergence and the generations without improvement in
its options row and Load Model reads them, but the sheet's saved model
(hidden names) did not hold them, so after Load Model, or any solve,
they fell back to their defaults. The saved model now keeps them for the
Evolutionary method: Convergence as solver_cvg, which means the same in
Excel, and the generations as gridcraft_solver_stall, because Excel's
solver_mni is a time in seconds. Saving a model again and Reset All
remove the GridCraft name with the solver_* names.
* Data: Solver Load Model refuses a range with a gap
Load Model from a range of several cells kept only the cells that hold a
formula, so the rows below a cell without one moved up. A constraint cell
overwritten by a constant gave a model without that constraint, and an
empty cell before the options row gave the default options, both without
an error. Load Model now refuses a range in which a cell before the last
formula holds no formula, and names that cell. Empty cells after the
model are still allowed.
* Data: Solver removes only its own names when it saves or resets a model
Saving a model (by a solve or Load Model) and Reset All removed every
name of the sheet that starts with solver_, so a user's own name such as
solver_budget was deleted with the model. They now remove only the
Solver's names: the ones Excel's Solver writes (solver_opt, solver_adj,
solver_lhs1, solver_rel1, solver_rhs1 and so on) and GridCraft's own.
The names are matched by name rather than by the hidden flag, so a model
whose names lost that flag is still replaced in full.
* Data: Solver Save Model refuses a place where the options cannot spill
The options row that Save Model writes is an array constant of eight
values, which spills into the seven cells to the right of its first
cell. Content in any of those cells blocked the spill and the options
cell showed #SPILL!. Save Model now checks the whole spill range before
it writes anything and refuses, naming the cell, when a cell there holds
content or another formula's spilled values or is a cell of the model,
when merged cells or a table meet the row (a dynamic array cannot spill
into a table), or when the range runs past the last column. It also
refuses a place where the model's column would cover another formula's
spilled values, which that formula would lose to #SPILL!. The options of
a model saved at the same cell before may be replaced, as before.
* Data: Solver Reset All and Load Model drop the old model's options
Reset All cleared the model fields of the Solver Parameters form but
kept the Evolutionary options (Convergence, Mutation Rate, Population
Size, Random Seed, generations without improvement and Require Bounds),
and Load Model kept any of them that the loaded model omits, such as all
of them for a GRG Nonlinear or Simplex LP model. A new Evolutionary model
then solved with the old options, for example with Require Bounds off.
Both now remove the model's options from the form first (one list of
their keys), so an option the model doesn't set takes its default.
* Data: Solver Save Model asks before it replaces data
Save Model wrote its formulas over whatever the model range held.
It is now refused, with the sheet unchanged, when a cell of the
range holds a value or a formula (a model saved there before
included), unless `overwrite: true` is passed. The message names
the first such cell and carries the same "already holds data"
phrase as Data Analysis, so the Solver Parameters dialog asks
"Replace it with the model?" with Replace and Don't Replace. The
question belongs to the range it asked about: editing the range,
Load or Reset All drops it. The check runs after the spill checks,
so the question is asked only when replacing would succeed. A save
remains one undo step.
Tests: the engine test refuses a value, a formula and an earlier
model, accepts only a true boolean, and undoes and redoes the
replacing save in one step; the dialog test covers Don't Replace,
an edited range and Replace. Both fail without the change.
* Data: Solver Load Model and Reset All tests for limits and undo
Tests for behaviour already in place: reading down from one cell of
a column of 5,000 formulas stops after the most rows a model takes,
a range larger than a model is refused before any cell is read, and
malformed or hostile cells and ranges (unbalanced brackets, an
overflowing number, an unknown sheet, 10,000 nested brackets, a
non-text `from`) each give an error and leave no model. Undoing
Reset All brings the model back with its options (the population
size).
* Data: Solver Load Model refuses a model without its options row
Load Model from one cell read down to the first cell without a
formula, and a range dropped its trailing cells without formulas.
A constraint cleared in the middle of a saved model, or its options
row cleared or replaced by a constant, therefore left a prefix of
the model, which was loaded as the whole model with default options
and replaced the sheet's model. Every load now requires the model's
last row to be the options row ({...}) that Save Model writes last;
otherwise it is refused, naming the cell without a formula when
reading down from one cell, and the sheet's model stays as it was.
The test clears a middle constraint, clears the options row and
replaces it by a constant, loads from the first cell and as two
ranges, and checks after each refusal that the old model (three
constraints, Simplex LP) is unchanged. It fails without the change.
* Data: Solver Options
The Solver Parameters dialog's Options button shows the Solver Options
in the same window: Max Evaluations and Integer Optimality for all
methods, and Convergence, Mutation Rate, Population Size, Random Seed,
Maximum Generations without Improvement and Require Bounds on Variables
for Evolutionary. OK keeps the changes for the next solve; Cancel
restores them.
The evaluation limit and Integer Optimality are now part of the model:
they are saved in the hidden names (solver_itr, which counts evaluations
in place of iterations, and solver_tol) and in the options row of Save
Model. Both accept numbers or text, as the other options do.
* Data: Solver keeps its own limits out of Excel's Solver names
The evaluation limit was saved as solver_itr. Excel uses that name for
its iteration limit (100 by default), so a workbook saved by Excel would
give GridCraft 100 evaluations and stop its search early. GridCraft now
saves the evaluation limit as gridcraft_solver_evals, which Excel
ignores, and no longer reads solver_itr. Saving a model again and Reset
All remove it with the other model names. Integer Optimality
(solver_tol) keeps Excel's name, as its meaning is the same.
* Data: Solver Reset All also resets the Solver Options
Reset All removes the model's options from the Solver Parameters form,
the Solver Options fields (the evaluation limit, Integer Optimality and
the Evolutionary options) and Require Bounds, so the next Solve uses the
defaults. It now also removes the copy of the options that Options keeps
for Cancel. A test checks that the options are gone after Reset All and
that Options then shows the defaults.
* Data: Solver reads Integer Optimality with a percent sign as percent
Integer Optimality is given in percent, but text such as "5%" was read
by the number parser as 0.05 and then divided by 100 again, so the
solver used 0.05 % instead of 5 %. A trailing percent sign is now
dropped before the number is read, so "5", "5%" and 5 all mean 5 %.
* Data: Solver Options closes with Escape back to the Solver Parameters
Escape in the Solver Options view went to the shared dialog handler,
which closed the whole Solver dialog: the options were not restored and
parameter edits made before opening Options were lost. Escape (and
closing the window) in Solver Options now does what Cancel does: it
restores the options and returns to the Solver Parameters. Escape in the
parameters still closes the dialog.
* Data: Solver keeps the Evolutionary options when another method solves
Solver Options sets the Evolutionary options whatever the solving
method, but the saved model and the model in data.solver's result held
them only for the Evolutionary method. A GRG Nonlinear or Simplex LP
solve (which saves the model by default) dropped them, and switching
back to Evolutionary brought back the defaults. They are now saved and
returned for every method. Two tests that expected them to be absent
for other methods now check their values.
* Data: Solver Options keeps its OK and Cancel row at button height
The Solver Options' OK and Cancel row was a right-to-left layout placed
straight in the window, which takes all the height it is offered, so
the buttons sat well below the last option and the window was taller
than its content. The row is now wrapped in a horizontal row as tall as
the buttons, as the other form dialogs do (ok_cancel).
The window's height now changes when it switches between the parameters
and the options, and the window re-centres over the next frames, so the
test that switches back and forth lets a few frames pass after each
switch before it clicks.
* Data: Solver Parameters keeps its Solve and Close row at button height
The Solve and Close row was a right-to-left layout placed straight in
the window. The window keeps its size when its content gets shorter, as
it does when the Load/Save area or a note is hidden again, and that
layout then filled the space left over, so Solve moved further below
the last row. The row is now a horizontal row as tall as the buttons,
as ok_cancel and the Solver Options do.
* Data: Solver dialog opened in its options sets them up as the Options button does
Opening the Solver dialog straight in the Solver Options (optionsView:
true) only changed the title. It skipped what the Options button does:
filling each option the form lacks with its default and keeping the
current values for Cancel. With no saved model the fields were blank,
and Cancel or Escape found nothing to restore, so the edits stayed and
the next Solve used them. The button and the dialog now share one
function for this.
* Data: Solver reads Integer Optimality back without floating-point noise
Integer Optimality is stored as a fraction, and the product with 100 is not exact for many percents (0.07 * 100 is 7.000000000000001). The percent is now rounded to 1E-10 % wherever it is read back: the saved model, the solve's model params and Save Model's options row.
* Data: Solver reads whole-number options back as integers
The model's numeric options were returned as floating-point JSON, so after a solve the Solver Options showed 20000.0, 100.0, 0.0 and 50.0. Values read from the hidden names, and Integer Optimality in the solve's result, are now JSON integers where they are whole, and the dialog shows 20000, 100, 0 and 50.
* Data: Solver test checks the model saved by the second solve
The test of Excel's iteration and time limits ignored the result of
its second `data.solver` call and checked only names the first call
had already created. It now reads the saved model afterwards and
checks the values the second call changed (Simplex LP and an
evaluation limit of 700). The call itself still fails, as Simplex LP
refuses the nonlinear model, after the model is saved.
* Data: Solver Load Model refuses an options row cut short
The options row of a saved model was read leniently: a missing value
or one that isn't a number took its default, and values after the
sixteenth were not read at all. A row cut short or edited by hand,
such as ={1}, therefore loaded the model with default options in
place of the saved ones (here: GRG Nonlinear in place of Simplex
LP). The row must now hold at least the eight numbers Save Model
writes (method, non-negative, population size, mutation rate, random
seed, require bounds, convergence, generations without improvement),
and every value in it, however many, must be a number; otherwise
Load Model is refused and the sheet's model stays as it was. Only
the first sixteen values are kept. More numbers than eight are still
read, so a row with options a later version adds loads too.
The test loads rows of one value, seven values, a text value among
the eight, after them and after the sixteenth, and a TRUE, from the
first cell and as a range, checking the old model after each
refusal, and a row of ten numbers, which loads. It fails without the
change.
---------
Co-authored-by: FredApps <FredApps@users.noreply.github.com>
* Data: Solver Load/Save Model and Reset All
data.solverSaveModel writes a model (the sheet's saved model, or one
given as data.solver params) down a column of its sheet as formulas:
the objective and goal (=MAX(...), =MIN(...) or =cell=value), the
variable cells (=COUNT(...)), one =AND(relation) per constraint, which
shows TRUE while the constraint holds, and the method and its options
as an array constant. It refuses a range that overlaps the model's
cells or runs off the sheet.
data.solverLoadModel reads such a range (or reads down from its first
cell), checks the model and makes it the active sheet's model.
data.solverReset (Reset All) removes the active sheet's model. Each is
one undo step.
The Solver Parameters dialog has Reset All and Load/Save buttons; the
dialog can also be opened with fields that go over the saved model.
* Data: Solver Reset All also clears a model read from workbook-level names
A sheet's Solver model can come from workbook-level names, which every
sheet without a model of its own reads. Reset All removed only the
sheet-level names, so such a model stayed and the dialog showed it
again.
Removing the workbook-level names would change every other sheet that
reads them. Reset All instead leaves them in place and writes an empty
sheet-level solver_opt over them on the active sheet only; the result
says masked: true. saved_model now reads a sheet's own names when the
sheet has a solver_opt, and the workbook-level names only otherwise,
never a mix of both, and treats an empty solver_opt as no model. The
mask survives XLSX and is replaced when a model is saved on the sheet.
* Data: Solver Save Model clears the rest of a longer model saved at the same cell
Saving a model over a longer one saved at the same cell left the old
model's last rows on the sheet, so Load Model from that cell read the new
options row followed by stale constraint rows and refused the range.
Save Model now clears what is left of a model saved there before (only
when those cells hold a complete model written by Save Model, and never
the new model's own cells), keeping the cells' formatting, in the same
undo step. Load Model reading down from one cell also stops at the
options row, so formulas just below a saved model no longer break it.
* Data: Solver Load Model keeps the Evolutionary convergence and generations
Save Model writes Convergence and the generations without improvement in
its options row and Load Model reads them, but the sheet's saved model
(hidden names) did not hold them, so after Load Model, or any solve,
they fell back to their defaults. The saved model now keeps them for the
Evolutionary method: Convergence as solver_cvg, which means the same in
Excel, and the generations as gridcraft_solver_stall, because Excel's
solver_mni is a time in seconds. Saving a model again and Reset All
remove the GridCraft name with the solver_* names.
* Data: Solver Load Model refuses a range with a gap
Load Model from a range of several cells kept only the cells that hold a
formula, so the rows below a cell without one moved up. A constraint cell
overwritten by a constant gave a model without that constraint, and an
empty cell before the options row gave the default options, both without
an error. Load Model now refuses a range in which a cell before the last
formula holds no formula, and names that cell. Empty cells after the
model are still allowed.
* Data: Solver removes only its own names when it saves or resets a model
Saving a model (by a solve or Load Model) and Reset All removed every
name of the sheet that starts with solver_, so a user's own name such as
solver_budget was deleted with the model. They now remove only the
Solver's names: the ones Excel's Solver writes (solver_opt, solver_adj,
solver_lhs1, solver_rel1, solver_rhs1 and so on) and GridCraft's own.
The names are matched by name rather than by the hidden flag, so a model
whose names lost that flag is still replaced in full.
* Data: Solver Save Model refuses a place where the options cannot spill
The options row that Save Model writes is an array constant of eight
values, which spills into the seven cells to the right of its first
cell. Content in any of those cells blocked the spill and the options
cell showed #SPILL!. Save Model now checks the whole spill range before
it writes anything and refuses, naming the cell, when a cell there holds
content or another formula's spilled values or is a cell of the model,
when merged cells or a table meet the row (a dynamic array cannot spill
into a table), or when the range runs past the last column. It also
refuses a place where the model's column would cover another formula's
spilled values, which that formula would lose to #SPILL!. The options of
a model saved at the same cell before may be replaced, as before.
* Data: Solver Reset All and Load Model drop the old model's options
Reset All cleared the model fields of the Solver Parameters form but
kept the Evolutionary options (Convergence, Mutation Rate, Population
Size, Random Seed, generations without improvement and Require Bounds),
and Load Model kept any of them that the loaded model omits, such as all
of them for a GRG Nonlinear or Simplex LP model. A new Evolutionary model
then solved with the old options, for example with Require Bounds off.
Both now remove the model's options from the form first (one list of
their keys), so an option the model doesn't set takes its default.
* Data: Solver Save Model asks before it replaces data
Save Model wrote its formulas over whatever the model range held.
It is now refused, with the sheet unchanged, when a cell of the
range holds a value or a formula (a model saved there before
included), unless `overwrite: true` is passed. The message names
the first such cell and carries the same "already holds data"
phrase as Data Analysis, so the Solver Parameters dialog asks
"Replace it with the model?" with Replace and Don't Replace. The
question belongs to the range it asked about: editing the range,
Load or Reset All drops it. The check runs after the spill checks,
so the question is asked only when replacing would succeed. A save
remains one undo step.
Tests: the engine test refuses a value, a formula and an earlier
model, accepts only a true boolean, and undoes and redoes the
replacing save in one step; the dialog test covers Don't Replace,
an edited range and Replace. Both fail without the change.
* Data: Solver Load Model and Reset All tests for limits and undo
Tests for behaviour already in place: reading down from one cell of
a column of 5,000 formulas stops after the most rows a model takes,
a range larger than a model is refused before any cell is read, and
malformed or hostile cells and ranges (unbalanced brackets, an
overflowing number, an unknown sheet, 10,000 nested brackets, a
non-text `from`) each give an error and leave no model. Undoing
Reset All brings the model back with its options (the population
size).
* Data: Solver Load Model refuses a model without its options row
Load Model from one cell read down to the first cell without a
formula, and a range dropped its trailing cells without formulas.
A constraint cleared in the middle of a saved model, or its options
row cleared or replaced by a constant, therefore left a prefix of
the model, which was loaded as the whole model with default options
and replaced the sheet's model. Every load now requires the model's
last row to be the options row ({...}) that Save Model writes last;
otherwise it is refused, naming the cell without a formula when
reading down from one cell, and the sheet's model stays as it was.
The test clears a middle constraint, clears the options row and
replaces it by a constant, loads from the first cell and as two
ranges, and checks after each refusal that the old model (three
constraints, Simplex LP) is unchanged. It fails without the change.
* Data: Solver Load Model refuses an options row cut short
The options row of a saved model was read leniently: a missing value
or one that isn't a number took its default, and values after the
sixteenth were not read at all. A row cut short or edited by hand,
such as ={1}, therefore loaded the model with default options in
place of the saved ones (here: GRG Nonlinear in place of Simplex
LP). The row must now hold at least the eight numbers Save Model
writes (method, non-negative, population size, mutation rate, random
seed, require bounds, convergence, generations without improvement),
and every value in it, however many, must be a number; otherwise
Load Model is refused and the sheet's model stays as it was. Only
the first sixteen values are kept. More numbers than eight are still
read, so a row with options a later version adds loads too.
The test loads rows of one value, seven values, a text value among
the eight, after them and after the sixteenth, and a TRUE, from the
first cell and as a range, checking the old model after each
refusal, and a row of ten numbers, which loads. It fails without the
change.
---------
Co-authored-by: FredApps <FredApps@users.noreply.github.com>
* Fix#2812: Intel Macs skip wgpu's indirect-call validation shaders
Metal's Intel compiler aborts on wgpu's indirect-validation compute shaders
("Compiler encountered an internal error"; MTLCompilerService crashes in
reportUnsupportedMaxWorkGroupSizeMetadataError), the device is lost inside
request_device and GridCraft exits before its window opens. GridCraft issues
no indirect draws or dispatches, so on Intel Macs the instance leaves
VALIDATION_INDIRECT_CALL out; WGPU_VALIDATION_INDIRECT_CALL=1 turns it back
on. Every other platform keeps wgpu's default. Same as WordCraft (#2652 there).
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01JadgGo4G2GHaAMNb3qyygk
* Review: test that WGPU_VALIDATION_INDIRECT_CALL=1 still turns it on; qualify the doc line
The override is checked in a child test process with the variable set, since
tests can't set environment variables without unsafe code. The revision line
no longer says Intel Macs start: OpenCore Legacy Patcher Macs on macOS 15 can
still fail on the MSL version (#1116).
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01JadgGo4G2GHaAMNb3qyygk
---------
Co-authored-by: Claude <noreply@anthropic.com>
A formula calling a Google-only function (GOOGLETRANSLATE, QUERY,
ARRAYFORMULA...) opened as #NAME? where the wrapper had shown the cached
value, as Excel does. The XLSX reader now unwraps a cell formula only when
every function inside is known: read_xlsx_with takes the predicate (the
xlsx crate can't depend on the function library) and the engine passes
gridcraft_calc::is_known_function. Unwrapping stays in the reader so shared
formulas are shifted from the unwrapped master.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
egui's Visible/Minimized/Focus go through winit, whose macOS focus_window skips a minimized window or a hidden app, and macOS can refuse the activation. When a Dock quit opens a question, unhide the app, deminiaturize its windows and activate it through AppKit, and bounce the Dock icon if it still isn't active.
Quit from the Dock reaches GridCraft while it is behind other apps, hidden or minimized. The Save Changes question opened in the workbook's window, but nothing brought that window forward when it was already the active one, so the app looked stuck. The window is restored, shown and focused in that order, since macOS ignores Focus for a minimized window or a hidden app.
Review follow-up. item_letter_with compared the compact params string, so a key
order or spacing difference between keytips.json and the caller would miss the
item. It now takes a serde_json::Value and compares parsed values. Tests add
prefixes that must not open the Borders menu (a finished sequence, another
group's level, another control) and an unknown preset.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Review follow-up. Inside Borders is GridCraft's own Borders menu item (Excel's
menu has none), so it had no letter and was the one preset the keyboard
couldn't reach from the open menu. It takes J, unused under HB.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
At the "HB" level every Borders sequence (HBA..HBW) shares the prefix, so
control_badge drew no badge and nothing opened: after B the screen showed no
key tips at all, although the next letter still applied its preset. The
Borders menu now opens at its group level, as Excel's does, with each preset's
letter (told apart by its params) and More Borders' M. A letter or Esc changes
the prefix, which closes the menu as before; clicking the arrow still toggles it.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
The Running section says macro.check takes `output`, but the
macro.check signature further down left it out. It now lists
`output?`, and says the reported output anchor is `output` when given.
Google Sheets' XLSX export writes a formula that uses a function it thinks
Excel lacks as IFERROR(__xludf.DUMMYFUNCTION("<formula, quotes doubled>"),
<cached value>). GridCraft showed the wrapper as the formula.
fmla::from_file, which every cell formula read goes through (plain, shared
master and t="array"), now recognises exactly that shape: IFERROR (with or
without _xlfn.) of a single-string __xludf.DUMMYFUNCTION call, any case.
If the string parses, the formula inside replaces the wrapper, as the whole
formula or nested in a larger one (parenthesised unless it is a single
operand). The cell keeps the file's cached value.
Bounded on hostile input: inner text over MAX_FORMULA_LEN is not parsed,
only one level is unwrapped, and a result that no longer parses (nesting
past the parser's limit) keeps the file's formula. Text that doesn't parse
keeps the wrapper.
Saving writes the real formula with Excel's _xlfn. prefixes, as Excel does
with the _xlfn functions it knows. Keeping cached results for functions
GridCraft can't calculate is #2770 and not part of this change.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
The reader took the sheet's first VML drawing relationship. A sheet
with pictures in its header or footer has a second VML drawing
(<legacyDrawingHF>), and when that relationship came first the control
shapes were not found: VML-only controls were skipped, and listed
controls lost their caption and macro. The drawing is now the one
<legacyDrawing r:id> names, as pass-through already does.
The focused control took every pressed key event, the system's key
repeats included, so holding Enter or Space on a focused button ran its
macro or command again for each repeat. A repeat now still belongs to
the button (it doesn't reach the grid) but doesn't press it; arrows,
Page Up and Page Down held on a slider or spin button keep stepping.
The footprint counts a deleted form control as a conflict, but the
check made as each step runs counted only charts, pictures and shapes.
After a footprint that stopped early (at Solver, or an approved file
step), a later step could delete a control with no question. It now
counts controls too, so such a step stops the run under fail and asks
under ask.
control.format and control.assign refused to change a locked control on
a protected sheet, but object.move, object.delete,
object.setAnchorMode, arrange.bringForward, arrange.sendBackward and
arrange.align changed it all the same. They now refuse it with the
same message; an unlocked control still moves, and other kinds of
objects are unchanged.
file-format-parity.md, target-app-parity.md and ui-parity.md gave form
controls a new timestamp line without a matching revision-history row;
each now has one. The file-format-parity.md timestamp line keeps the
earlier change it replaced, as the other docs do.
Each control listed in <controls> looked for its VML shape by scanning
every shape, so a sheet of 10,000 controls took over 8 s to open. The
shapes are now indexed by number once, and the same sheet opens in
about 0.4 s.
A sheet with more controls than a sheet keeps (10,000), properties
parts that are not XML, are missing or hold numbers no control can take
(1e400, NaN, -inf, 2^64), shape ids that are not numbers, anchors far
outside the grid, and oversized names and links. Reading keeps exactly
the cap, every control passes the model's rules, and a save and reopen
keeps them all.
Some producers give a VML shape a named id (`id="Button 1"`) and keep
its number in `o:spid`. The form control reader looked for the number
only in `id`, so a control listed in <controls> lost its caption and
macro (they live in the VML), and a control known only from the VML was
skipped. Shapes are now matched by `id`, else by `o:spid`, as
pass-through already does when it leaves the modelled shapes out.
The button actions xlsx has no place for (commands, fixed inputs,
output cells) are kept in a hidden name keyed by sheet and the
control's place on the sheet. When another application added, removed
or reordered controls before saving, opening the file gave the action
to whichever button now had that place, and could replace a macro the
file itself gave that button.
Each entry now also holds the button's name and anchor cell, and is
restored only on a button with that name and cell whose own action from
the file does not contradict it: a stored macro action only on a button
that still runs that macro, a stored command only on a button the file
gives no macro.
prxnvt
Brandon ThomasandClaude Opus 5.5
aiongg
Dylan M. Taylor
Brandon ThomasandClaude Opus 5.5
scks1
vioreltusandClaude Opus 5.5
Harrison SmithandClaude Opus 5.5
aiongg