It arrived as a plain number, so Effect Controls neither dragged it over its
slider range nor clamped an edit to its valid range, as After Effects does.
A definition of parameters that are not kept, shared by many instances, was
walked again for each one without spending the budget; long popup item
names were kept per instance with each item counted once.
A parameter past the budget was skipped and the next one tried, so the
rest of the effect, and every later effect without a counterpart, still
read its shared definitions and built popup items. The first parameter
that does not fit now ends the budget; a later effect without a
counterpart is reported on its own line without reading its definitions.
The docs now say that a placeholder's layer parameters report their keys
and expression.
* Export, Media: H.264, ProRes, HEVC, VP9, AV1, AAC, MP4 and Matroska come from craft-libs
crates/export and crates/media use craft-video, craft-audio and craft-media
(one craft-libs rev) instead of filmcraft-h264enc, -prores, -aac, -isobmff,
-matroska and -opus. The av1enc, hevcenc and vp9enc crates are removed:
craft-video carries the same encoders, with the later changes merged in
storytold/craft-libs#829. Their round-trip tests move to crates/export/tests
and run against craft-video.
opusenc stays (craft-libs has no Opus encoder yet), as do filmcraft-mpegts
and the filmcraft-vp9, -hevc and -av1 decoders the tests use as oracles.
* Pin craft-libs at the main commit that has the encoder colour description (e7c3dda7)
Such an item is shown on the document, which the size does not confirm; it is now reported in unsupported_items, when the opti stores the document's size.
An item as big as its layer's bounds was taken for Retain Layer Sizes. When
the layer is also as big as the document but not at its corner, a
document-framed item has the same size, so it may show shifted. The opti
record holds the document's size at bytes 32 and 36 (1000, 1000 in every
record of the issue's project, the .psd's size); with it, that case is
reported. The layer still shows at its own bounds.
A GPU project whose Render Queue job measured the CPU faster (#3335) rendered
every frame of a batch at once on the CPU, one per thread, with no memory cap:
on a 16-thread machine at about 1.4 GB a frame the app ran out of RAM and
exited without an error (0.23.1, Windows).
While a job renders on the CPU after a GPU frame measured its working memory,
CPU frames in flight now fit half the memory the system has free at that size
per frame, 1 to one per thread, settled once per job and logged. The probe's
timed CPU frames use the same cap. EFFECTCRAFT_CPU_INFLIGHT still overrides
it; Software Rendering projects, with no measurement, are unchanged. The host
reads the free memory through the new JobOptions::free_memory.
Footage made from one layer of a layered .psd showed the whole document and
was named after the file. Its opti (tag 8BPS) stores the layer: the record
index (BE i32 at 14, -1 for the merged image), the bounds (LE i32 at 78-93)
and the name (UTF-8 at 344). The item now shows that layer as EffectCraft's
own Photoshop import does (at its own size with Retain Layer Sizes), named
<layer>/<file>. A layer without pixels (an adjustment layer) keeps the merged
image and is reported.
Third-party plug-ins and pseudo effects (expression controls) were dropped on
import, so expressions reading them broke. Such an effect now arrives as an
effect group whose effect id is its After Effects match name: it renders
nothing, like a missing plug-in, and is listed by Find Missing Effects. It
holds the effect's parameters flat, named as in After Effects, with their
values, keys and expressions in the units After Effects' expressions read.
It is still reported (once per match name, "kept without rendering") and
counted in imported.placeholderEffects. The parameters and popup items kept
are bounded per import.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
An Orientation with an expression was reported as "not decoded" and lost its
value and keys too. The expression is stored in the otst's tdbs like on any
property, so it now arrives with the stored value or keys.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Shape Direction, blend mode, composite order and the gradient highlight
values were reported when their record was in the default state (tdsb 3),
which holds After Effects' default (docs/aep-format.md 3.4), so a plain
guide rectangle reported "shape direction not imported". They are now read
only from written records, keys or an expression.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
The prompt showed 3 detail lines per category under a bare count, which read
as the project's total. The headline now says how many occurrences are left
out or changed, every line the report keeps shows, and "… and N more" counts
the rest. The import report records that number as `unlisted` (an unmapped
effect's line covers all its instances); unmapped effects are listed most
used first.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Settings ▸ General ▸ Fit New Layers to Work Area (off by default) makes
new text, solid, shape, null and adjustment layers start at the work
area start and end at its end. It applies to Layer ▸ New, the shape
tools and the Pen tool, and wins over Create Layers at Composition
Start Time. Footage and compositions keep their own length.
architecture.md and web.md still said every job renders on the project's
renderer (#414); since #3335 a GPU job times both compositors on its first
frames and keeps the faster.
It never steps back up during a play, so a looping preview kept playing at a quarter of its resolution after its first loop. Without it the paced first loop caches the viewer's resolution and the next loops play in real time, as in After Effects. The setting stays for whoever prefers a lower first pass.
Settings > Previews > Lower Resolution When Playback Can't Keep Up (on by
default): a preview at Resolution Auto that stalls on uncached frames and
shows under 80 % of its frame rate for two seconds plays on at half the
scale, and two seconds later at a quarter if still slow, no lower than the
Adaptive Resolution Limit. Stopping goes back to the viewer's resolution
and Cache Frames When Idle fills it in. An explicit Resolution, the comp's
or the Preview panel's, is kept as set.
First playback of a 1080p comp with a blur (cache_bench --play): 9.0 to
22.1 frames/s on the CPU (about 27 once at Half), 4.1 to 16.1 with Mercury
Auto on an integrated GPU; plain clips that keep up stay at Full.
A comp left alone for a second fills its RAM preview from the current time,
so the first playback is cached instead of rendering frame by frame. Saved
settings keep their value. Two UI tests that assumed the old default set it
explicitly.
* AG4: xtask ci --affected
cargo xtask ci --affected [--base REV] [--dry-run] runs fmt, clippy, tests (nextest + doctests when available), layers, assets (only on asset changes) and wasm (only for affected L0-L4/web crates) for the packages a change can affect: changed files map to the owning package and to packages whose sources read them via ../ paths, expanded to reverse dependents. Workspace-wide inputs (root Cargo.toml, Cargo.lock, .cargo/, xtask/, toolchain, clippy.toml) fall back to full CI. Documented in docs/testing.md, AGENTS.md and CLAUDE.md.
(cherry picked from commit f3ca84fc2ee3948582cbc94e4c99ee510e829540)
(cherry picked from commit 8a2cdcadf447eafa57ab14016beae4420f002af0)
(cherry picked from commit d8a4301bc1)
(cherry picked from commit 36402c61ac2f7e29ecd76a6cfc89365cc2572e0a)
* AO1: fast CI profile, looser timing tests
- [profile.ci] (release without LTO, 16 codegen units); `xtask ci` runs clippy
and tests with --profile ci instead of --release.
- Wall-clock asserts in engine memory_tick, gpu OpenGL decline and script
socket tests keep their intent with bounds that survive a loaded machine.
- docs/testing.md and CONTRIBUTING.md mention the profile.
(cherry picked from commit b45c8a379351ebdfda0d7076ad4b740baf6f2087)
(cherry picked from commit fa1ea6a107c4c1936cde89b518a05adc73f2b4b0)
(cherry picked from commit e5d5ed80e9)
(cherry picked from commit d2c67660c70764f9c56880a642ad7f0d004a7f92)
* AG6: journal replay repros
Bug reports become replay scripts and crash regression tests become data files:
- engine::replay: a JSON-lines repro format (start line, command steps with
expect_error, expect queries with JSON pointer + equals, expect_no_error),
a never-panicking runner that reports per-step ok/error and the first failure,
and journal export (from the last project open; saves left out; size-capped).
- journal.export {path?} and help.exportRepro {path?} (not journaled).
- Crash capture: when the last-resort guard catches a panic in the outermost
command, the journal plus that command is saved to Repros/crash-*.jsonl in the
settings store (newest 20 kept) and the error names the file.
- Commands run by a journaled command (script steps) are no longer journaled twice.
- effectcraft-cli replay SCRIPT.jsonl [--json] [--keep-going]: exits 1 on a failed
step, unmet expectation or panic.
- crates/host/tests/repros.rs replays every tests/repros/*.jsonl; three samples
from past crash fixes (zero frame rate, Layer Settings with no selection,
New Comp from Selection with hostile overlap).
- Docs: docs/agents.md "Repro scripts"; AGENTS.md: crash fix regression test =
a .jsonl in tests/repros.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
(cherry picked from commit c38509d7dafe507856c48c78db65e00b94b0cebc)
(cherry picked from commit e55b56dbf76716adfcbfe4cc773df19a74edc419)
(cherry picked from commit 96a63855a9)
(cherry picked from commit c59351ab3bd697f0868e41230dd883960d94a540)
* xtask: ci and ci --affected run cargo test and nextest with --no-fail-fast
One run now lists every failing crate instead of stopping at the first.
Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_019qXL3GPNnY9BSFF2XoU2Yu
(cherry picked from commit e46c7debe738eca62b35bf7392ab77637f6a33ae)
* Agents: confinement write-checks journal.export, help.exportRepro and file.exportTimeline
Review on #859 (split into this PR): their output paths were only read-checked (relative ones
not at all). Test: confinement_covers_every_command_that_writes_a_file.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_014d65YdNxQmjRkbXRtP2NwH
* #1224: handle bin-only CI targets and BOM repros without weakening timing tests
* #1224: run the full gate when nextest policy changes
---------
Co-authored-by: Elias <hakifx91@gmail.com>
Co-authored-by: Claude <noreply@anthropic.com>
Co-authored-by: FredApps <FredApps@users.noreply.github.com>
Co-authored-by: FredApps <153173854+FredApps@users.noreply.github.com>
Removes the unused egui_demo_lib, egui_inspection and egui_system_font_provider patches and adds cargo xtask lock-patches to cargo xtask ci. Fixes#3403.
Dropping an .aep or .aepx on the window, or picking one in File > Import > File...
or Multiple Files... (also from the Home screen and the Project panel), imports it
as File > Import > Adobe After Effects Project... does, instead of failing as
unsupported footage: the losses prompt first when parts cannot come over, its
items in a folder named after the file, its first composition open.
- Several projects are asked about one at a time: the others wait in the
prompt's queue, and Cancel skips only the one it asks about. A prompt another
dialog replaced (Save changes?) strands nothing: its projects are tried with
the next import or queued behind the next prompt.
- The other files of a drop or pick import as footage, into the Project panel
only when a project is in the drop. While the prompt shows, a Photoshop file
or image sequence imports with its defaults instead of replacing the prompt,
an Interpret Footage question leaves a note instead, and a dropped .ecproj is
skipped with a note. While Save changes? waits for a dropped .ecproj, the rest
of the drop is skipped with a note instead of landing in the replaced project.
- Errors of every picked project reach the status line on both the blocking and
the non-blocking file dialog.
- The Import File dialogs list .aep, .aepx, .ecproj and .ecprojx; Replace
Footage offers footage only.
- For scripts and agents, file.import hands After Effects projects to
file.importAep; a refusal (new EngineError::Refused) names the menu entry and
`file.importAep` with `allowLosses`.
- File > Import / Export name the entry Adobe After Effects Project..., as
Adobe Premiere Pro Project...; File > Import keeps After Effects' order with
the project imports together and the formats only EffectCraft imports after a
separator. All 13 menu catalogs and the losses dialog title are updated.
- Docs: aep-import, aep-export, footage, file-format-parity, agents.
Supersedes #3312.
* WebAssembly ABI 2: neighbouring frames for effect plug-ins (#2773)
A wasm plug-in can export ec_api_version 2 and ec_render2 to receive the layer's previous and next frames, their layer times and validity flags. Neighbours come from PluginHost::input_at, are resampled onto the current grid, and are zeroed when absent. ABI 1 modules (ec_render) load and render unchanged; the manifest api stays independent. A layer with an ABI 2 plug-in keys the render cache on layer time; the Plug-in Library accepts ABI 1-2 releases. Docs, help text and tests updated.
* Fix ABI 2 neighbour times on NTSC frame boundaries
ime * fps is often a few ulps off an integer at rates such as 24000/1001. The old boundary test then took the bracket branch and passed the current frame back as prev (or
ext). Treat a near-integer as a frame boundary within 1e-6 frames, and test 2400 frames at 24000/1001: every boundary must get the frames either side. Also document the loader helpers for the docstring coverage check.
---------
Co-authored-by: justanshh <294019246+justanshh@users.noreply.github.com>
* #3099: placed .ai pages fill the size After Effects stored; null anchors default to the corner
Footage of an .aep keeps the size After Effects stored for a placed PDF / Illustrator / EPS
file (the ArtBox, rounded up), and masks and anchors are measured against it. The page was
drawn as a PDF viewer frames it (CropBox, /Rotate) at its own size, scaled by the width ratio
at full resolution and stretched to the stored aspect below 3/4: masks too large, art off
centre, squeezed at half resolution.
- effectcraft-pdf: Framing::Placed / parse_page_framed (ArtBox clipped to the CropBox,
/Rotate ignored); boxes with a non-finite corner or span are not used
- Footage::placed_page (set by the .aep importer, serialized only when true): the page is
framed so and filled into the stored size (effectcraft_render::vector_fit), decoded,
continuously rasterised and in Create Shapes from Vector Layer; Reload keeps the size;
the frame cache keys it by size and framing
- .aep import/export: a null's absent Anchor Point is [0, 0], as After Effects reads it
- fixture ai-mask-3099.aep (own synthetic files, scrubbed, profiles stubbed) and tests
against After Effects 2026's read-back
* #3099: placed-page framing only for .ai and .pdf, EPS as before; doc comments
After Effects' sizing was measured with PDFs named .ai only; an EPS from an .aep keeps its
bounding box at its own size (listed as not measured in docs/gaps.md and docs/aep-import.md).
Doc comments on the touched functions.
* #3099: shapes from a placed page keep its frame (track matte)
Create Shapes from Vector Layer converted every path of a placed page, so bleed, art past the
artboard or the page's background showed where the footage's raster hides them. The layers it
makes from a placed page now take a hidden "<layer> Frame" shape layer (the footage's
width x height) as their Alpha track matte: drawn at the comp's resolution, its edge is the
raster's on shape and image layers alike. The command returns the frame layer's id too.
Related to #1365. Display labels only; effect, command, parameter, panel and serialized ids and the AEP/script match-name tables are unchanged.
- 69 Cycore CC effects, Key Light, Mocha shape, Lumetri Color/Scopes and the Mercury renderer labels get descriptive names; the old names stay case-insensitive lookup and search aliases.
- Backend::parse accepts the new renderer labels, so reported settings round-trip.
- Display names are unique per language in every effect catalog (new test).
- Warp Stabilizer and Roto Brush keep their names until RFC-0029 settles.
- Mapping in docs/feature-naming.md.
arnav-hiwarkar
Dylan M. Taylor
FredApps
nazar-gavrylyk
JonRC
nnaannoo
vangel76
just_anshhandjustanshh