Queued writes carry their pixels (a layer buffer shared with the RAM cache, a frame moved in)
and the writer thread converts and compresses them; rendering threads go on at once. An entry
larger uncompressed than the cache may hold is refused before it is queued.
Session::thumbnail_key: a comp's content key (as the disk cache keys frames), footage's item and
settings, the time, the size, the render switches and the footage reloads so far. The panel
renders a thumbnail again only when that key changes, not on every revision.
The reach walk followed comp, footage and solid sources but not
LayerSource::Model. An expression reading a model layer's source
(thisComp.layer("Model").source.name) left the model item out of the
comp's content key, so renaming the model kept the key and the old
frames on disk were served. Every source item is followed now
(LayerSource::item), which also counts the model when no expression
reads it (Advanced 3D draws it).
The same omission is fixed in the RAM preview's content walk
(frames.rs) and in the layer key's walk of referenced layers
(cache/dependencies.rs).
Review follow-ups to the reserve fix:
- accepts_writes also refuses while free disk space leaves less than
64 MB of room (a limit the setting asks for is always used): a few
frames would fill it, and the rest would be compressed only to be
refused.
- While writes are refused the idle passes ask for no repaint, so the
UI keeps a frame coming every 5 s: the free space is read again and
the RAM frames are written once there is room.
- Settings > Disk names the space kept free on this disk (the reserve
the last reading applied; the rule from MIN/MAX_DISK_RESERVE when it
is unknown), and the "no room" note follows accepts_writes.
- The settings.disk.cacheLimit automation label is machine-readable
and the same in every language: limitMb, maxMb, reserveMb,
spaceLimited, writes.
- cargo fmt.
The reserve the cache leaves free on its disk was max(2 GB, 5% of the
disk) (#2551). On a 4 TB disk with 190 GB free that is 200 GB, so a
cache set to 20 GB had a limit of 0: every write was refused, the cache
never held anything, and only a log warning said so.
The reserve is now clamp(5% of the disk, 2 GB, 10 GB). It is there to
keep the cache from filling the disk, not to keep a share of a large
disk free: 10 GB leaves the system room to work on any disk, a small
disk still keeps 2 GB, and a 100 GB disk keeps 5 GB as before. After
Effects has only a maximum cache size and no reserve; a clamp keeps
the floor for small disks, where a fixed 10 GB would take most of the
space.
Writes the limit refuses cost no work: DiskCache::accepts_writes (one
atomic read) is checked before a frame is converted (put_disk_frame)
and before frames and layers are compressed (put_frame, put_frame_f16,
put_layer). The frame workers spent about 8 ms per frame and 14 ms per
layer on encodes that were then refused. persist_missing returns at
once at limit 0 instead of converting the RAM frames on every idle pass.
Settings > Disk shows the limit in effect in MB under Maximum Disk
Cache Size, with a note when free disk space lowers it
(settings.disk.cacheLimit).
Reload Footage empties the RAM preview, but an idle pass of
persist_missing may already hold a frame from before the reload. It
took the cache's drop generation when it ran, after the drop, so the old
pixels could be written back and, with the file's size and time
unchanged, served again after a restart.
Each RAM frame now keeps the disk cache its render started with and
that cache's drop generation then. persist_missing writes a frame only
to that cache, with that generation, and skips it once one of its files
was dropped since; a frame rendered without that cache is not written
from there.
Tests use tempfile directories (the layer drop test, the frame_files
folders under target/).
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
- A reload while the disk cache is off is kept on the session
(pending_disk_drops) and applied when the cache is switched on, before
anything is read from it.
- Each render takes the cache's drop generation before it reads (frame
worker; layer cache at the miss). An entry listing a file dropped after
that is refused under the queue's lock, so a render that was under way
during the reload can't store pixels from before it. Such a frame is
shown with an incomplete file list, so persist_missing skips it too.
The per-file record is bounded (past it, everything older is refused).
- An entry read while its drop was pending is a miss even when the
writer ends the sweep between the read and the check (a stale hit
found under load): the pending drops and the generation are taken
before the entry is read.
- Test: a reopened project serves its frame from disk with no source file
opened or decoded.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
EvalCtx carries the render's read log. A sampleImage render records its footage
reads, keeps them with its per-thread cached buffer and notes them in the
evaluating render's log on every use. Text notes the font files it is drawn with,
with the identity their bytes were read with; a family that isn't installed, a
fallback or missing glyph, or a font from memory leaves the list incomplete.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
With an expression anywhere in the project, every comp's disk key hashed
every item of the project, so any edit (another comp, an unused footage
item) threw away every comp's frames on disk. The key now covers what the
comp can draw plus what the expressions among it can reach
(Project::pixel_reach):
- without expressions: the items the comp draws, without silent layers,
plus the footage its precomp layers swap in (Media Replacement);
- with expressions: every layer of the comps they reach, their markers,
the comps and footage they name with string literals (comp("Name"),
footage("Name")) together with which items have those names now, and
the footage named like a reached source (its data is read by name);
- the whole project when an expression computes a name, uses the object
model's constructors or internals, dynamic code, computed keys or
writes, or text the scanner can't read for sure (regex literals,
template strings, escapes): expression_reach errs towards reaching more.
Markers count only where an expression can read them (#1083). Memory
only, no file is looked at.
Tests: scanner and reach unit tests in the project crate; engine tests
for the key (own-comp expressions keep the key through edits elsewhere,
comp("Other") follows Other and not a third comp, a second comp taking
the name counts, a computed name counts every item, markers read from
another comp); a ui-egui test that the disk frames outside an expression
layer are carried when the comp it names changes.
Part of #3184. Part of #1492.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Layer: Un-precompose a selected pre-comp layer back into its parent composition (#2918)
layer.unprecompose copies the nested composition's layers into the parent at the pre-comp
layer's place with timing and position carried over, and refuses what it can't keep exactly.
Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>
* Un-precompose: refuse a pre-comp layer with Solo or Guide on
A soloed pre-comp layer hides the comp's other layers and a guide layer is
left out of renders; the expanded copies carry neither switch, so the picture
would change. Listed with the other blockers, in the command description and
the agents.md Cookbook entry; the refusal test covers both switches.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Un-precompose: warn instead of refusing, only a locked layer stops it
A locked pre-comp layer is still refused, with or without `force`. Every
other former refusal reason is a warning: without `force`,
`layer.unprecompose` returns an error that lists the reasons and changes
nothing. `dryRun` returns `{dryRun, warnings}`. With `force` the layer is
unpacked in one undo step and the result carries `warnings`. Whatever the
pre-comp layer itself carried is dropped, and other layers' parent, track
matte and layer-property links to it are removed.
Layer > Un-precompose in the UI lists the reasons in a prompt with
Unpack Anyway / Cancel (`dialog.unprecompose.force` /
`dialog.unprecompose.cancel`). A layer without reasons unpacks at once.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Un-precompose: warn about expressions that refer to the pre-comp layer
An expression on another layer of the comp that names the pre-comp layer
would no longer find it once the layer is unpacked. The expression can
name it in quotes or call `layer(<index>)` with its index, bare or on
thisComp; another comp's comp("…").layer(…) is not counted. Each such
property is now listed once as a warning. Like the other warnings,
`force` unpacks and `dryRun` lists it. The expressions are left as
written.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Un-precompose: warn about lost frame sampling and Position expressions, keep markers in order
Review follow-up (CodeRabbit on #3081):
- A nested comp that preserves a frame rate other than the parent's
samples its layers on its own frames, and the expanded copies would
lose that. Motion-blurred nested layers under a different shutter
would also blur with the parent's shutter. Both are now warnings.
- When the pre-comp layer's Position differs from its Anchor Point, the
move is added to the stored Position of the unparented nested layers.
An unparented layer whose Position, or a separated axis, has an
expression may ignore that move, so it is now a warning.
- Copied comp markers are sorted into time order with the comp's own.
- New tests: a 10 fps nested comp with Preserve Frame Rate in a 30 fps
comp, a different shutter, a Position expression with and without a
move, and nested matte and layer-value remapping with shifted markers
merged in order.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Un-precompose: warn when an expression's layer numbers shift; the prompt keeps its target
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Un-precompose: a shorter renumbering warning
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Sonnet 5.5 <noreply@anthropic.com>
Co-authored-by: FredApps <153173854+FredApps@users.noreply.github.com>
* Image sequences: a gap in the numbering holds the previous frame, as After Effects
Split out of #1876 (originally 7850cbf4), because it reverses the colour bars
documented in #297 and needs its own discussion.
After Effects 2026 shows the last existing file across a gap in a sequence's
numbering (files 1, 2, 4, 5 show frame 2 at frame 3; read back from After
Effects). EffectCraft drew colour bars there. The media pool now holds the
previous file (Footage::sequence_file_held); colour bars remain only where no
file precedes the frame. Missing-frame reports on import are unchanged.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Image sequences: hold the first file of the preceding number across a gap; fix the import warning
A gap now holds the file sequence_file picks for the preceding number, so
files sharing a number do not switch at the gap. The Report Missing Frames
warning says the previous frame is held instead of "shown as placeholders".
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Image sequences: Interpret Footage says a gap holds the previous frame
The Interpret Footage note for a numbered sequence with gaps still said the
missing frames are shown as colour bars; the media pool holds the previous
frame there now. The note, its comment and two test doc comments say so,
and a forms test checks the note's wording.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
Co-authored-by: FredApps <153173854+FredApps@users.noreply.github.com>
Part of #3184 (step 3 of 4).
Layer buffers on disk (and in the browser's layer store) now carry the
files they were made of, like frame entries since step 2, and are checked
against exactly those files when used. The project-wide footage salt is
gone: nothing stamps every footage file any more.
- Layer entry format 4: the buffer's EntryFiles, then the pixels. A hit
checks only the listed files (metadata, or the VirtualFileId hook for
files from memory; Missing must still be missing); a change, a damaged
entry or the old format 0 is a miss and the entry is deleted, so the
re-rendered buffer replaces it. A hit reports its file list, so frames
made of buffers from disk are complete and get stored again.
- Buffers whose files can't all be named are not written.
- Layer disk keys: layer_disk_key = hash of the layer entry version, the
renderer version and the layer cache key (which names the footage items
with their paths and settings, from memory).
- PrefetchStore checks on use; an entry made of changed files is dropped
and forgotten, so the new buffer is queued over it. FrameServer passes
its virtual-file hook to its layer cache.
- Removed: footage_salt(_with), file_stamp, footage_stamp,
set_disk_salt, set_store_salt, Session::refresh_disk_salt,
poll_disk_salt, footage_fingerprint, disk_salt, disk_salt_background,
disk_salt_job, DiskSaltJob, the UI's per-frame poll, the salt in
FrameServer and in the availability worker (with its cache_enabled
plumbing). The disk cache is attached as soon as it is configured.
- Docs: architecture.md, web.md.
Tests: layer entries check their files (size, time, missing/back,
folder, damaged, old format, incomplete); virtual files; prefetch store;
media tests with a real pool across restarts (only the changed file is
read, projects with the same item ids never share an entry, missing,
unreadable and damaged never serve stale buffers); engine tests that the
cache is attached at once and edits do no file work (#1926, #3106).
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Part of #3184 (step 2). Fixes#3175: opening a comp no longer stamps every
footage file of the project before its first frame can show.
- The comp's content key (`disk_cache::comp_content_key`) is taken from the
project in memory alone: no footage or proxy file is stamped, no
`VirtualFileId` is asked. `comp_content_key_with` is gone; `frame_key`
hashes a new entry version, so entries of the earlier format are never
looked up again (LRU evicts them).
- Frame entries (formats 2 and 3) store the files the frame read
(`EntryFiles`: size and modification time as read; size and content hash
through `VirtualFileId` for files from memory; missing files), then the
pixels. Formats 0 and 1 read as misses and are deleted.
- Check on hit: `get_frame`/`get_frame_f16` look only at the listed files
(one metadata call each) on the frame worker. A changed, back or unreadable
file, or a damaged entry, is a miss: the entry is deleted and the frame
rendered and stored again.
- A frame whose file list is incomplete is shown but not stored. The RAM
preview keeps each frame's files, so `persist_missing` writes only frames
with a complete list.
- Remote frame worker: `FrameServer` records each frame's reads
(`take_files`); the web worker stores them with the entry and the page
checks them through the file table before using it. The browser's media
epoch existed only for the old key and is removed. Export does not use
frame entries.
- The cache indicator still only asks whether an entry exists.
Tests: entry format round trip and damage, the check per file, and in the
viewer: a changed file re-renders exactly its frames (and a reopen reads the
rest from disk); a frame checks only its own files in a project with a large
unused sequence and the key looks at no file; missing, unreadable files and
damaged entries never serve a stale frame.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Part of #3184 (step 1): renders now report which footage files they read,
each with its identity (size and modification time) as read. Nothing uses
the list yet: images, cache keys and cache behaviour are unchanged.
- render: `reads` module with `FileStamp`, `ReadFile`, `ReadFiles` (sorted,
deduplicated, bounded; marked incomplete when it can't vouch for every
file) and the thread-safe `ReadLog`. `Renderer::reads` collects a frame's
files; `FootageSource::recording` lets a source note what it reads.
`file_stamp` uses the same identity.
- Layer cache entries keep the files their buffer was made of and report
them on every hit; derived entries (styles, blend space, flattened) keep
their base's. Buffers from the disk cache or the browser store don't know
their files yet and mark the list incomplete.
- Media pool: every file read notes its identity, taken from the file it
opens. Decoded frames, opened movies, GIFs, models and EXR channels keep
it with the cache entry, so a frame served from memory reports its file
without touching the disk.
- Viewer frame worker collects each frame's list and carries it to where
the disk entry is written (step 2 stores it).
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
On a hosted macOS runner the_shader_is_the_reference found 168 of 16384
bytes one step off, just over the 1 % a real GPU is allowed.
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* #1335: accessibility slice 2: Info, Flowchart, Script Console and the 3D Camera Tracker block named, described and keyboard-operable
The audit gets read-outs, graphics and logs as described items (a name is required in a fixed panel), dedicated maximized scenarios for the panels the shared loop squeezes, and minimum counts for the new zero panels.
Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>
* Review: Enter/Space on a favourite star only toggles it; keyboard activation of a property label; settings page scrolls to focus; sharper UI test assertions
Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>
* Refresh the accessibility audit baseline after merging upstream/main
Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>
* a11y audit: hold the machine-dependent Media Browser scenario to its upper bound
The Media Browser opens on the home folder, so a runner with fewer files finds fewer controls and
the 'improved, lower the entry' check failed in CI. The entry stays an upper bound.
Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>
* Merge upstream/main and updated feat-gap25-a11y-audit into feat-gap25-a11y-panels-2
Brought in the updated feat-gap25-a11y-audit (which already contains upstream/main). Conflict: crates/ui-egui/src/menus.rs, which upstream split into menus/*.rs. Took the slim module and re-applied this branch's Flowchart hunks where the code now lives: nudge() skips the Flowchart (menus/invoke.rs) and Enter is left to the Flowchart in handle_shortcuts (menus/shortcuts.rs).
Also removed a duplicate MACHINE_DEPENDENT const in tests/ui_accessibility_audit.rs that the two branches both added. The audit BASELINE still matches the measured findings.
Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>
* Flowchart: split show() to pass the stricter clippy limits from main
Main now denies cognitive_complexity (30) and too_many_arguments; the
merged flowchart panel exceeded it. The keyboard navigation, the
key-to-node mapping, pan-into-view, node commands, the accessible node
name and the option params move into small helpers with unchanged
behaviour.
Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>
* Camera tracker a11y test: wait for the analysis result instead of one frame
The test pressed Enter, ran one frame and expected to see the background job.
On a fast runner the job starts, ends and is written back inside that frame,
so the state was never seen. Undo the first analysis, press Enter, and wait
(bounded) for the new analysis step in the undo history.
Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>
* Accessibility: one hours range for the accessibility pass in ui-parity.md; test that Flowchart automation labels stay English
Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>
* Flowchart toolbar: keep the English label for the automation registration
The translated text is shown and spoken; the automation label stays English.
Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Sonnet 5.5 <noreply@anthropic.com>
Co-authored-by: OpenAI Codex <noreply@openai.com>
Co-authored-by: FredApps <153173854+FredApps@users.noreply.github.com>
* Timeline: hover texts for the icon-only column headers and layer switches
The Timeline's column header is painted as one click target, so its
icon-only headers (A/V Features, Label, #, the eight switches and the
Modes column's T) had nothing to hover and nothing explained them.
HEADER_TIPS lists each one with a short name and an explanation in our
own words. Hover-only widgets on top of the header show the text, carry a
named ColumnHeader AccessKit node and register automation ids
(timeline.header.av.*, timeline.header.switches.*,
timeline.header.modes.preserveTransparency). The header's clicks and
right-click column menu still work underneath. The layer rows' A/V and
switch toggles and the Preserve Transparency box show the same texts.
The accessibility audit's Timeline baseline drops from 89/42 to 72/25
because the switches now have accessible names.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Timeline headers: accessible description, Preserve Transparency text, English menu test
The header's node is named before its hover text is added, so screen readers get the
explanation; Preserve Transparency says the layer follows the alpha below it, partial alpha
included; the hover test sets English before checking the translated Hide This item.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Merge main: keep both sets of timeline tests
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Timeline tests: close the test before the merged one
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
Co-authored-by: FredApps <153173854+FredApps@users.noreply.github.com>
show() went one over the cognitive complexity limit once #3094 landed on
current main, which failed clippy on every later commit.
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* Cryptomatte: the Layer popup lists the footage's Cryptomatte layers (#473)
The popup was the constant CryptoObject / CryptoMaterial / CryptoAsset. It now lists the
Cryptomatte layers of the layer's OpenEXR footage, and those three when there are none. The
stored value keeps its meaning (0-2 the standard layers, 3 and up the file's other layers in
name order), so older projects render the same.
Refs #473
Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>
* Cryptomatte Layer popup: timeline editor, one menu helper, probe and fallback tests (#473)
Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>
* Cryptomatte Layer popup: give further layers of a standard kind a custom slot
A.CryptoObject keeps slot 0; B.CryptoObject and later ones get 3+ instead of
being dropped, so they can be selected, picked and rendered.
Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>
* Format; note same-kind layers in the footage docs
Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>
* Format the merged code with rustfmt
Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Sonnet 5.5 <noreply@anthropic.com>
* Viewer exposure on the full float range of 32 bpc frames (#2797)
32 bpc viewer frames on the desktop are rendered without the HDR step (skip_hdr_step,
#2916) and kept as half floats in the RAM preview. A display pass on egui-wgpu's device
turns each frame into one RGBA8 texture with mips per viewer, in this order: decode,
exposure in linear light, Compand / Tone Map, encode, display colour, Show Channel,
rounding. Before, exposure was an 8-bit lookup applied after tone mapping, clamping and
the display conversion, so -2 EV could not bring values above 1.0 back.
- engine: viewer::DisplayPass describes the pass as data; its pixel() is the CPU
fallback (no device) and the shader's reference. It replaces exposure_lut /
display_transform. FrameEncoding records a frame's curve and the HDR step it still
needs. 32 bpc snapshots are taken without the HDR step; snapshot_rgba8 applies it.
- ui-egui: FrameImage::CpuF16 (half crate, F16C at run time), byte accounting at 8 bytes
a pixel in the cache and the prefetch estimates; display_gpu.rs + display_gpu.wgsl;
main viewer, snapshot and passive viewers draw through the pass; the 8-bit image other
panels read is made on demand with the HDR step; the Info panel shows float values.
- Half-float frames are not written to the disk cache yet.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Viewer display pass: f16 disk cache entries, window-device gating, review fixes
- Disk cache: half-float frame entries (format byte in the entry header, byte planes +
LZ4); 8-bit entries keep format 0 and stay valid. 32 bpc viewer frames are written and
read again, and the timeline's disk bar sees them. A damaged half-float entry is
deleted.
- The display pass runs on the window's egui-wgpu device, with or without the GPU
compositor (still building, failed, GL fallback). Its pipelines are made inside error
scopes; a backend that rejects them gets the CPU pass instead of a blank viewer.
- A new LUT of the same size (another ICC profile, Preserve RGB, another display) runs
the pass again.
- f32 to f16: one pass per L1-sized block, the NaN / infinity fix-up on the bits, no
fill of the buffer (4K: 4.7 ms, as the 8-bit conversion).
- Mips of odd-sized levels include the last column / row; the snapshot's half floats
and texture go with the snapshot; no placeholder texture ids; u64 size checks.
- Tests: LUT profiles and negative values against the shader, Bake reruns, the passive
viewer's colour, f16 disk round trips; exact comparisons allow 1 LSB on software
rasterizers. Docs: the display pass and the f16 disk entries in architecture.md.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Viewer f16 disk-cache test: temp dir removed on failure too, wait for the queued disk write
Review points: the test's directory was only removed by its last statement
(now tempfile::TempDir), and the frame is released before its disk write is
queued, so flush() could return early (now waits for the entry).
Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>
* Viewer: oversized half-float frames use the CPU display pass, so exposure/HDR come before the averaging down
Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>
* Viewer: fmt and a debug assert for the half-float upload path
Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>
* Disk cache: persist_missing also writes half-float frames
Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>
* Passive viewer: oversized half-float frames take the CPU display pass instead of leaving a stale texture
Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* Viewer: Alt-drag duplicates the dragged layers (#2968)
Alt/Option-drag of the selected layers in the Composition viewer duplicates them and drags
the copies; the copy and the drag are one undo step. edit.duplicate takes a merge key for it.
Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>
* Alt-drag: duplicate from a 3D gizmo arrow, no double move of a selected child
Alt-dragging a gizmo arrow moved the original; it now duplicates and moves the
copy along the axis. A selected layer whose parent is dragged too follows the
parent, so its own Position no longer gets the drag a second time (with or
without Alt).
Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Sonnet 5.5 <noreply@anthropic.com>
* Project panel: the Name column fits long names and resizes
The Name column was 40 % of the panel and at most 260 points wide, with
no way to resize it, so long item names (compositions of an imported
After Effects project) ended in "..." even in a wide panel.
It now fits the longest listed name, never narrower than before and at
most the panel's width less the Label column (the optional columns keep
scrolling under it). Dragging the column's edge in the header resizes
it, a double-click on the edge fits the names again. The width is kept
in UiState::project_name_w (None = fit the names); the edge has the
automation id project.nameColumn.edge.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Project panel: the Name column leaves room for the optional columns; no name fit for a manual width
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* Timeline: one selection box spans the layer list and the time graph (#3056)
Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>
* Timeline box test: say what it tests
Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>
* Timeline box: a box kept in the time graph selects keys only
Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>
* Format the timeline box test and box_targets signature
Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>
* Timeline box test: drive the real drag across the outline and the time graph
Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Sonnet 5.5 <noreply@anthropic.com>
* Disk cache: stamp footage files for the salt off the UI thread
Importing an After Effects project whose footage includes long image
sequences on a network share froze the desktop app for 15-27 s. The
import itself takes about 0.25 s; the time went into the edit's bump(),
where refresh_disk_salt() stats every footage file (13,466 sequence
frames in the measured project, ~15 s) on the UI thread whenever a disk
cache is attached. File > Open and footage reload hit the same path.
With Session::disk_salt_background (set by the desktop app) the salt is
taken on a worker thread and picked up by poll_disk_salt() from the UI
tick. Until it lands the layer cache runs memory-only, so keys under the
old salt (other files, or another project's items) are never read. A
newer footage change supersedes a salt still being taken. Headless
sessions keep taking it synchronously.
A settings change that keeps the disk cache folder no longer re-stamps
every footage file either.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Disk cache: opening a project drops the footage salt being taken
A salt job still running for the old project was kept when the new project named the
same footage, so the salt stamped before the files changed stayed in use.
Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* Home screen: leave it when a menu command opens a composition
File > Import > After Effects Project... from the Home screen imported the
project (the toast said so), but the Home screen stayed on top, so it
looked as if the import had done nothing. Only the Home screen's own
buttons left it.
run_engine now leaves the Home screen when a command succeeds and changes
the active composition to one that is open, the rule scheduled script
tasks already follow. Frontend events run afterwards, so Help > In-App
Tutorials and New Project from Template still show it. A command that
opens no composition (or fails) keeps it.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Home screen: also leave it for a project that replaces one with the same composition id, a picked file and the New Composition dialog
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
A press on the ruler right beside the marker bin, released a few points
away on the bin, is still a click, and it counted as one on the bin; two
of those added a marker. A click now counts as the bin's only when both
its press and its release are on the bin, in a frame when the bin is
enabled and has the pointer (not a popup above it).
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
The bin counted a double-click from egui's flag for the whole frame and
the number of releases over it, so three clicks in one frame, on the bin,
beside it and on it again, still added a marker. It now walks the
frame's pointer events itself, by egui's rules for a click and a
double-click, and adds one only for two clicks in a row that are both on
the bin. It also counts while the bin is dragged or its drag has just
stopped, not only while the pointer is over it.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
egui takes any click within a few points of the last one for the first
click of a double-click, so a click on the ruler right beside the bin and
then one on the bin added a marker. The bin now remembers when it was
last clicked and adds one only when the first click was on it too (or
both came in one frame over it).
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Sensing clicks on the marker bin as well as drags held the drag back
until the pointer had moved, so a drag out that was released in that
same frame (a fast drag, or a slow frame) added nothing. The bin senses
drags only again, so its drag starts the moment it is pressed, as
before #1826, and the double-click is read from the pointer over it.
The double-click test now also gives the second press and its release
frames of their own, with the bin dragged in between.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* plugins: install effect plug-in bundles (wasm + ScriptUI panels) in one go
* plugins: address review - keep listing errors, refuse replacing an installed plug-in
* plugins: report unreadable bundle entries when their metadata cannot be read
* plugins: surface partial install errors in the menu bar, cover the install flow with tests
* plugins: surface partial install errors for async dialog answers too
* plugins: show result errors as compact status text
* plugins: harden installs - confined automation, no panel overwrite, size cap, cleanup errors
* plugins: bound install reads from one handle, detect unreadable panels, clarify install docs
* plugins: drop an unneeded mut in the bounded read
* plugins: saturate the bounded read limit
* plugins: install into the session's Plug-ins folder, refuse hidden single installs and case-variant panels
- Install .wasm files into Session::plugins_dir() (the folder the Plug-in Library
from #2524 uses), not a path rebuilt from the settings folder; the host tests
now point both at their temp folder so they never touch the real settings.
- A single install of a hidden file (".x.wasm") was skipped and reported as a
success that installed nothing: it is now an error.
- Installed names must be bare file names (and not Windows device names on
Windows), as file.installScript requires, so every installed panel is listed
and can be uninstalled.
- A panel whose name differs from an installed one only in case replaced it on
Windows and macOS: compare ignoring case and check the file on disk too.
- The loaded plug-in's source is the installed copy, not the file it came from.
- Document the `bundle` menu parameter, so checked execution accepts it.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* plugins: drop needless to_vec in the bundle install test (clippy)
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* plugins: keep the loader test's byte vectors, drop to_vec in the install test (clippy)
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: STAR Web Studio <hello.starwebstudio@gmail.com>
Co-authored-by: FredApps <153173854+FredApps@users.noreply.github.com>
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* Plug-ins: API 2 (PluginHost, padding, layer_span)
Split out of the OpenFX work so it can be reviewed on its own. Additive; the WebAssembly ABI
stays at 1.
- point3 / layer / text / hidden parameters, integer sliders, parameter groups.
- EffectPlugin::padding (transparent pixels around the buffer, at most 4096 per side).
- EffectPlugin::render_v2 with a PluginHost: the input at other times, other layers, parameters
at other times, frame rate, per-instance key, the layer's source range.
- EffectEnv::layer_span from the renderer; MAX_PLUGINS 1024.
- plugin_error: a plug-in effect's last render error, for the UI.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01KxacwTpUwqyfpcLgKW8yjS
* Plug-ins: external effect helpers (crates/helper-host)
Native plug-in formats run in separate helper programs, never in EffectCraft's process
(docs/adr/0001-external-effect-helpers.md). New safe-Rust crate effectcraft-helper-host (L3,
native only, unsafe forbidden): it finds helper programs, starts each as a child process and
registers its effects through plug-in API 2, so the UI and command surface need nothing new.
- Protocol v1 (docs/external-helpers.md): JSON lines over stdin / stdout (helper replies are
prefixed so plug-in chatter is ignored); pixels go through a frame exchange file (/dev/shm on
Linux), never through the pipe. Render-time callbacks for the input at other times, other layers
and parameters at other times, with nested renders through the same helper.
- A helper that exits, hangs past its timeout or breaks the protocol is stopped. The render fails
with a message, the frame is left as it was, and the helper restarts for the next render. An
effect that stops its helper 3 times is turned off (helper_blocklist.txt).
- Opt-in: nothing starts helpers unless the user asks (Effect > Scan for Effect Helpers), or opts
in to starting them at launch with EFFECTCRAFT_HELPERS=1, an environment variable, so writing
to the settings folder alone can't run code. effect.helpers.scan / load are refused for
confined agent sessions (confine.rs), like file.executeFile.
- Discovery: helpers/ next to the app (Contents/Helpers on macOS), helpers/ in the settings
folder, EFFECTCRAFT_HELPER_PATH.
- Commands effect.helpers.list / scan / load; Effect menu entries (translated); the last render
error of an effect shows as a warning sign after its name in Effect Controls.
- serve(): the helper side for Rust helpers. tests/it/main.rs runs the whole protocol (render,
padding, callbacks, nesting, threads, crash, restart, block list, hang) against a fake helper,
with nothing to install.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01KxacwTpUwqyfpcLgKW8yjS
* Effect helpers: address review (start failures, frame file mode, nextest listing)
- A helper that can't start (not installed any more, restarting too often, no frame exchange
file) is reported but no longer charged to the effect being rendered: it is Failure::Refused,
not Failure::Broken, so it never counts toward turning that effect off. New check in
tests/it: once the helper is out of restarts, renders of an effect fail without blocking it
(fails without the fix: the effect was turned off after 3 such renders).
- The frame exchange file is created owner-only (0o600) on Unix: it holds the user's frames and
/dev/shm is shared. Asserted in the frames unit test.
- tests/it (harness = false) speaks the libtest listing protocol cargo-nextest uses:
`--list --format terse` prints `helper_protocol: test` (nothing with `--ignored`), and
`helper_protocol --exact` runs the checks.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01KxacwTpUwqyfpcLgKW8yjS
* Effect helpers: bound writes to a helper, drain stderr, keep callbacks in step
- Writes to a helper go through a writer thread with the request timeout: a
helper that stops reading its stdin (hung with a large callback answer or
render request pending) no longer blocks the render thread forever while
holding the helper.
- stderr is drained as bytes (lossy, in 64 KiB pieces) to the end: output that
isn't UTF-8 stopped the reader, closing the pipe under the helper (EPIPE /
SIGPIPE on its next write); lines were unbounded.
- Callback images that can't be written are answered with `null` instead of
failing the render while the helper waits (which left the protocol out of
step); a frame that can't be written before the request is sent is not
charged to the effect.
- Mid-render calls use the render's own process: no respawn or heartbeat ping
while the helper is waiting for an answer.
- Waiting for a busy helper is bounded (load timeout) instead of forever;
status() no longer blocks on a running render.
- Reap the child when start-up fails after spawning; cap the block list read.
- Scripts start helpers only with Allow Scripts to Write Files and Access
Network on (they run native code), as for File.execute().
- helper-host declares the workspace's no-panic crate lints; the desktop
main() keeps its doc comment.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Effect helpers: rustfmt the fake provider, build the test session in its initializer (clippy)
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Plug-in Library: offer WebAssembly API 1 releases only; a helper already stopped mid-render isn't charged again
- WasmPlugin loads only modules at the WebAssembly ABI version, which stays 1 while
PLUGIN_API_VERSION is 2: share it as effects::plugin::WASM_API_VERSION and have the
library's compatibility check use it, so it never installs an API 2 release that
can't load.
- with_running: a process that is already gone was stopped by what broke it (a nested
render, charged there), so this render fails without charging its own effect.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* frames: plug-in effects count as reading other frames (plug-in API 2)
With main's narrowed frame invalidation (#2795), an edit inside a precomp under an
effect that reads its layer at other times must reach the layer's whole span.
Plug-in API 2 gives every plug-in effect the input at other times, so any effect
outside ec. counts.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
Co-authored-by: FredApps <153173854+FredApps@users.noreply.github.com>
* frames: keep cached frames an edit can't reach
Nudging, trimming or splitting a layer re-rendered the whole comp. The RAM
preview now carries every frame whose stack of active layers is unchanged
to the new comp identity; only the segments an edit touches re-render.
* disk cache: never drop frame writes; save frames kept after edits
Frames get their own write lane (bounded by bytes, written before layer
buffers), so a burst of layer writes no longer drops frames and leaves gaps
in the blue bar after reopening. Frames an edit kept in RAM are written to
disk under the comp's new content key when idle.
* frames: music and hidden layers keep the caches
Layers that can't change pixels (audio-only footage, AV layers with Video
off, when nothing reads them and there are no expressions) no longer count
for the RAM preview's dirty segments or the disk cache's comp and footage
keys. Adding, trimming or moving music keeps both caches.
RENDER_VERSION bumps to effectcraft-render-3 for the new key formula.
* ui-egui: background caching benchmark
cache_bench fills a comp's RAM preview the way idle caching does and
prints frames/s with decoder, footage-cache and disk-cache counters.
* frames: soloed music and hidden layers aren't silent
Solo hides every other layer, so soloing a music track or a layer with
Video off changes the picture. silent_layers no longer drops soloed
layers, so the RAM preview and the disk cache see Solo toggles.
* disk cache: audio files a layer reads stay in the layer salt
Audio-only footage left the disk layer salt so importing music keeps the
keys, but Audio Spectrum and Audio Waveform draw from an audio layer.
Footage another layer reads (or any, when a read layer is a precomp)
counts again, so overwriting that file doesn't reuse stale buffers.
* disk cache: retry frame writes the queue refused
put_frame reports whether the frame is on disk or queued. persist_missing
forgets the key of a refused write, so a full frame lane no longer leaves
RAM frames that are never written.
* ui-egui: cache_bench measures idle caching; checks --comp and --slots
Frames go through request_background with one slot per frame thread, as
Cache Frames When Idle does. An unknown --comp is an error (the active
comp is used only without --comp), --slots is at least 1, and the disk
report flushes queued writes instead of sleeping.
* disk cache: RENDER_VERSION effectcraft-render-6
This branch changes the cache-key formula (silent layers, Solo, read
audio in the footage salt), and upstream #2759 already took render-5
for the clip-clock change, so entries from either must not be reused.
* frames: rewrite RAM frames the disk cache evicted
persist_missing kept every disk key it ever queued, so a frame the disk
cache evicted later was never written back. The disk cache now tracks
frame writes still queued or in progress (frame_pending), and
persist_missing only remembers keys while it converts them.
* frames: idle passes continue while RAM frames wait for disk
persist_missing reports whether there may be more to write (a content key
being computed, frames being converted). Cache Frames When Idle then
schedules another pass, so a refused write is retried without waiting for
a UI event, and the passes stop once every frame is on disk or queued.
* frames: rewrite an evicted frame once, not on every idle pass
A disk cache smaller than the RAM preview, or a frame too large for it,
made idle passes write, evict and rewrite the same frames every 500 ms.
Each disk key is now written at most twice under one disk limit (the
write and one rewrite after an eviction); a new limit resets the count.
The persist test waits for the conversion to forget its keys before
checking that no work is left.
* frames: the work area doesn't change pixels
Setting the work area (B, N) cleared every cached frame, in RAM and on
disk: it was compared with the comp's pixel settings and hashed into the
disk key. It is a preview and render range only, like the Resolution, so
it no longer counts.
* frames: audio edits keep frames unless something draws the audio
Changing a clip's Audio Levels, its audio effects or its Audio switch
cleared the clip's cached frames, and the comp's disk cache, although
nothing drew that audio. The audio now counts only for the layers whose
audio is heard (Project::heard_layers): those a layer picks in an effect
(an Audio Waveform or Spectrum, even on itself), the layers of a picked
precomp, and every layer while an expression (which can read Audio
Levels) exists. Music in a precomp that a waveform in the outer comp
picks is no longer treated as silent either.
* frames: an expression only reaches the frames of its own layer
One expression anywhere in the project made every edit clear the
comp's whole cache, and so did editing a layer another layer reads
(its parent, matte, or a layer it picks). Expressions can read
anything, but they only draw in their own layer: an edit now re-renders
the frames where it changed something, plus those of the layers with an
expression and of the layers that read a reached layer. With
expressions, an edit elsewhere (another comp, an item's name, a marker,
music) reaches only the expression layers' frames.
* frames: an edit inside a precomp re-renders only where the precomp shows it
Editing anything inside a precomp cleared every cached frame of the
comps that nest it, even a music level in it. Project::dirty_spans now
follows precomps: it takes the spans their comp changed in, shifts and
scales them by the precomp layer's start and stretch (its whole span
under a time remap or Responsive Design timing), and keeps the outer
comp's other frames. Layers that read a changed precomp (a matte, a
waveform) re-render where they are active.
* disk cache: keep the frames an edit can't reach
The disk cache keys frames on a hash of the whole comp, so every edit
lost the frames that were only on disk (the blue bar), even a rename;
only those still in RAM were written again under the new key. When an
edit keeps RAM frames, it now also queues a disk carry: on the frame
pool, each kept frame of every disk series in use for that comp is hard
linked (or copied) to its new key with DiskCache::link_frame, oldest
edit first. The old entries stay, so undo finds them too.
* frames: a keyframe edit re-renders only around the keys it changed
Changing one keyframe (its value, interpolation or ease, in the
Timeline or the Graph Editor) re-rendered the layer's whole length, so
a key on a full-length layer cleared the whole cache. A layer that
differs only in keyframes of its Transform properties now re-renders
from two keys before the first changed key to two after the last
(auto-Bezier and continuous tangents reach the neighbouring segments),
to its in or out point past the first or last key. Static values,
expressions, roving keys, time remap and time effects still reach the
whole layer; effect keyframes do too for now (simulations and time
effects read other frames).
* frames: music volume keeps frames while no expression reads audio
Any expression in the project (a wiggle on another layer, even a
disabled one) made every layer's audio count as read, so changing a
music layer's Audio Levels re-rendered every expression layer and
changed the comp's disk key. Audio now counts for expressions only when
one may read it (Heard::audio_exprs): its text names audio or walks
properties by index. An audio-only change nothing reads no longer counts
as a change elsewhere in dirty_spans either.
* frames: a keyframe edit with few keys or beside a self-contained expression keeps the other frames
Changing a Scale key of a layer with two or three keys re-rendered the
layer's whole length: with fewer than two keys before (or after) the
changed one, the span fell back to the in (or out) point instead of the
first (or last) key, past which the value holds. And any layer with an
expression re-rendered on every edit, so a wiggle on a full-length layer
cleared the whole cache. An expression layer is now reached by edits
elsewhere only when its text may read outside its layer (it names a
comp, layer, footage, the project or its source); its parent and the
layers it picks are still read through referenced_layers.
* viewer: the caching chip stays up between uncached frames, with a spinner
The "Caching frames…" chip showed only while playback waited for a
frame, so during caching it flickered on and off with every frame that
arrived. It now stays up 0.6 s after the last wait (and hides at once
when playback stops). It is also smaller and quieter: a spinner, then
"Caching frames" without the ellipsis in dimmed smaller text, on a
fainter chip sized to its text.
* preview: the Preview panel's cache bar counts the preview's Resolution
With a preview Resolution set (Half, Third…), the frames a preview
plays are cached at that scale, but the Preview panel's bar counted the
series the viewer shows. When playback stopped, the viewer went back to
the comp's Resolution and the bar dropped from full to the frames cached
there. It now counts the preview's own series (Auto still follows the
viewer). The viewer and the Timeline's cache bar are unchanged.
* Contributors: add nazar-gavrylyk's name
* frames: an expression reading its own layer's markers or audio re-renders that layer
With expressions in the project, a layer's markers count when comparing it, and its audio counts
when an expression may read audio, so a marker or volume edit re-renders the edited layer over
its own span. Comp markers still count only through layers whose expressions name thisComp.
* frames: a keyframe edit on a layer with an expression re-renders the layer
An expression on the keyed layer can read the keyed property at other times (Rotation reading
Position with valueAtTime), so the frames past the changed keys may change too.
* cache_bench: read decoder counters through effectcraft-media
Only crates/media, crates/export and crates/interchange may depend on the FilmCraft crates.
* cache_bench: clips end where the next one starts
* frames: write-back uses the worker's disk keys while a Roto Brush model is active
persist_missing keyed disk frames on FrameKey::opts, which also carries the Roto Brush model
stamp; the worker and disk_frames key on the render opts' hash alone. With a model active every
RAM frame looked missing, was written again under keys nobody reads, and recorded a second disk
series.
* frames: an edit two precomps down reaches the outer comp
A precomp layer whose comp Arc didn't change was skipped, but the comps nested in it may have
(an edit in Inner leaves Mid's Arc as it was), so Outer kept every frame. Every nested comp is
walked now, each once per edit.
* cache_bench: stop when the disk cache can't be cleared
* frames: one disk carry job at a time
carry_disk runs on every timeline paint and idle pass, and spawned a pool job whenever carries
were queued; during a drag the extra jobs waited on the carry lock and held frame-pool threads
from the viewer. A scheduled flag keeps one job, which drains the queue in order until it's
empty.
* frames: a panicking disk carry is skipped, not left holding the job
The carry job clears carry_scheduled only on its normal exit; a panic in a carry would have left
it set for the session, so no later carry ran. Each carry is caught like the content key's
hashing, so the job always reaches its exit.
* frames: an expression reading its own in point or index re-renders its layer
A trim or rename kept the layer's frames outside the cut when the layer
drew the same apart from its span, but an expression on it can read its
own inPoint, outPoint or name (a fade from inPoint), so every frame of
the layer changes. Such a layer is no longer treated as only respanned.
An expression reading `index` reads the layers above it too: a layer
added or removed there shifts it, so `index` now counts as reading
outside the layer.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* frames: an edit of a comp reaches the expressions of the precomps it nests
An expression in a precomp can read the comp that nests it
(`comp("Main").layer("Controls")`), but the walk into nested comps only
counted changes outside the edited top comp. Editing a hidden Controls
layer there (or any layer, when the precomp is time-shifted or reads it
at other times) kept every precomp frame in RAM and linked them all on
disk under the new key. Nested comps now see an edit of the comp above
them as an edit elsewhere.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* frames: an edit in a precomp under a time effect reaches its whole layer
A precomp layer running Echo, Posterize Time, Time Displacement or
another effect that reads the layer at other times shows a nested change
far from where it maps, but only the mapped span (a nested frame either
side) re-rendered. Such a layer now gives its whole span, like a time
remap. `reads_other_frames` lists those effects (every `ec.time.` and
`ec.sim.` effect and the others that call `self_at`); keyframe spans use
it too.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* frames: a keyframe edit beside muted keys re-renders the whole layer
Muted keys are skipped when a property is evaluated, so the keys that
play around an edited key can be any distance away, but the span counted
two stored keys either side. A segment from an earlier playing key kept
its stale frames. Muted keys now give the layer's whole span, like
roving keys.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* frames: one echo in the precomp time-effect test (three saturate alike), rustfmt
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: FredApps <153173854+FredApps@users.noreply.github.com>
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
The bin at the right end of the time ruler only answered a drag, so a
marker had to be dragged out to where the current time was. As in After
Effects, a double-click on it now adds a composition marker at the current
time, one undo step. A single click still adds nothing, and dragging a
marker out of the bin works as before.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* G8: plug-in library
Community Plug-in Library for WebAssembly effect plug-ins (#376): one
reviewed catalog (index.json), install / update / remove from Settings >
Plug-in Library (also Effect > Plug-in Library...), library.* commands,
start-up loading of installed packages with SHA-256 checks. Downloads go
through the system curl (https, GitHub hosts), as trained models do.
Preview before installing (library.preview): the release is downloaded,
checked like an install, and rendered in the sandbox on a built-in sample
frame at default settings (2 s at 12 fps) with a Before/After split, plus
the effect's parameters, "Open on GitHub" and an optional author video
link (catalog field preview.video). Authors need to do nothing for it.
Hardening: a module that fails to load leaves the installed copy alone,
Update All updates every package in one job, minApp also applies to an
explicit version, curl ignores ~/.curlrc and URL globbing, unique temp
files, percent-decoded file URLs. Plug-in effect slots grow from 64 to
256 with a clearer overflow error.
Docs: plugins.md "Plug-in Library", publishing-plugins.md (author guide
from zero to listed), gaps.md; examples/plugin-catalog is the starting
content of the catalog repository (schema, validation workflow).
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* contributors: credit iseemhlyfta
* G8: plug-in library: doc comments on the library's functions
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* G8: plug-in catalog check: require one object with schema 1 and a packages array
An empty file or several JSON values passed jq empty, and with
SKIP_SCHEMA=1 nothing else checked the catalog's shape.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* G8: plug-in library: one preview texture set; catalog schema requires effects
The preview kept a texture set per package version previewed (about
6 MB each) for the whole session; it now keeps one, replaced when
another package is previewed. Releases in the catalog schema must list
at least one effect id, as the author guide says.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* G8: plug-in catalog schema: effect ids follow the manifest's id rules
Letters, digits, '.', '_' and '-', and not the reserved 'ec.' prefix,
so library.missing can match them.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* G8: refuse Plug-in Library jobs while automation file access is confined
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* G8: split the Plug-in Library page into toolbar, card, links and actions
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* G8: show Plug-in Library toasts without a Roto job; cache preview frame checks
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* G8: log Plug-in Library packages that fail to load at start-up
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* G8: check an update before replacing a loaded package; Update All past failures
- An update to a package that is already loaded is now compiled and its manifest checked
(through the previewer, without registering it) before the new file is written and the old
version's folder deleted. Before, a release with the right SHA-256 that didn't load replaced
the working version and failed at the next start.
- Package ids that differ only in case, or end in a dot, would share one folder on Windows and
macOS: the catalog keeps the first of them, and ids can't end in a dot (schema too).
- Update All: a package that can't be picked or installed no longer stops the others; the
result names what was updated and what wasn't.
- Downloads: at most 5 redirects, and one that ends off GitHub's hosts is refused, as the module
docs say.
- A job that panics no longer leaves the library busy; poisoned status locks are used, not
dropped.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* G8: rustfmt the update test
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
Co-authored-by: FredApps <153173854+FredApps@users.noreply.github.com>
* About: credits tables with resizable columns that fit without side-scrolling
Contributors and Models were egui Grids inside a two-way scroll area, so the
table opened wider than the dialog and scrolled sideways, and Company and
Model sat almost touching. Both are now egui_extras tables: each column
opens at its header and widest cell, the spare width goes to the text
columns (Name; Company and Model), and every column edge can be dragged.
Widening a column grows the table like a spreadsheet, and only then does it
scroll sideways; the header stays put while the rows scroll. Counts and
dates are right-aligned and every cell is vertically centred.
The sorted column stays highlighted, with its direction on the toolbar's
arrow button, so headers no longer reserve room for an arrow. The About
dialog is 820 points wide (modals still shrink to the window) so every
column fits at its natural width. egui_extras comes from the pinned egui
fork without default features; it adds enum-map.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* About: credits column widths come from a tested fit_widths
The opening widths of the credits tables are a pure function now, with unit
tests that a fitted table fills its room exactly (no side-scrolling, no
gap), that spare width goes to the growing columns, and that too little room
shrinks only those.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Let every credits column be dragged, and refit changed tables
The last column was egui's remainder column, which has no drag handle, so
it could only be resized from the edge before it. It is now an ordinary
column with its own handle.
A table keeps its column widths, so switching to a longer name left the
Name column at its old width and clipped the text. The table now goes
back to the opening fit whenever that fit changes: a longer widest cell
or a resized window. Dragged widths are dropped at that point.
fit_widths could overflow the room when one column hit the minimum,
because the other columns did not take up its share. Columns now give
way in proportion to their width above the minimum.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Refit credits tables on what they measure, not the fitted widths
Comparing the fitted widths missed the case it was meant for. Name is the
only growing column, so a longer name takes its extra width from the
spare room and the fit comes out the same: a dragged Name width stayed,
clipping the longer name.
It could also drop dragged widths by accident. The fit comes from the
available width inside the scroll area, which scrolling can nudge, so
scrolling a widened table could reset it.
The table now compares the natural widths and the clip rect's width,
which scrolling does not move.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
Add After Effects project import with bounded parsing, explicit loss reports, and regression coverage.
Fetch the cleaned external test corpus at commit 97262276f625afdeeb61787e4cbb74b3f17af510 and verify each fixture against the pinned SHA-256 manifest.
On Linux, the discrete-GPU memory cap now comes from the card's video memory: min(3 GiB, ¾ of amdgpu's `mem_info_vram_total`), so a 2 GB RX 550 gets 1.5 GiB. The card is matched by PCI address, falling back to the smallest card with the same ids.
Also folds in CodeRabbit follow-ups from #1856 (PatchMatch flags buffer limit preflight), #1490 (arbitrary-map index wrap), #1836 (round_away for |x| >= 2^23) and #3025 (saturating FrameCache byte accounting).
Fixes#1487
Co-authored-by: FredApps <153173854+FredApps@users.noreply.github.com>