* #5710: the Print panel lists printers without asking their drivers
On Windows the printer list waited until every printer's driver said
whether it prints on both sides. A networked printer in power save can
hold that query for a long time, so the list stayed empty and Refresh
stayed unavailable. WordCraft never used the answer.
Discovery now uses craft-print's printer_queues, which lists the same
queues and default without asking any driver (storytold/craft-libs#618).
Printing still checks the job's options with the driver. Only the
craft-print pin moves; craft-ui doesn't depend on it.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* #5710: the docs say what is proven, not that the sleeping printer is fixed
Review: the progress log and gap rows stated the reported outcome as
certain, but the sleeping network printer hasn't been retested. They now
say the driver query is removed and the reported printer awaits retest.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* #5710: craft-print pin moves to the merge of storytold/craft-libs#618
e653048 is craft-libs main's merge of #618; crates/print is identical
to the reviewed and tested head 81c2488.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* #5710: a print job waiting on its driver can be cancelled, and quitting doesn't wait for it
On Windows a print job asks the printer's driver for its capabilities
before it is sent, and a networked printer in power save can hold that
query for a long time. The Print page stayed locked until the driver
answered, and quitting waited for the job before saving preferences
(CodeRabbit on #5732).
Each job now carries a craft-print Cancel token. Cancel printing
(ui.printCancel) stops a job that hasn't started reaching the spooler,
so it is never sent, and frees the Print page with the settings kept;
a job already being sent completes, and the page says to cancel it
from the system's queue. Quitting cancels jobs still waiting and waits
only for jobs already being sent.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* #5710: quitting cancels every waiting print job before it waits; Cancel asks the active job
Review: quitting cancelled and waited for jobs one by one, so a job left
waiting while an earlier one was being sent could start sending
meanwhile. Every job is now cancelled first, then only those already
being sent are waited for. Cancel printing asked every unfinished job,
so a job that had just been sent could be reported as cancelled and its
receipt lost; it now asks the job being submitted, which answers that it
was already sent.
The tests cover both orders, junk parameters for ui.printCancel, and the
kept printer list and status message.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* #5710: craft-print pin moves to storytold/craft-libs#622 for submit_cancellable
85c8ca1 is #622's head (craft-libs main e653048 plus the Cancel token);
it moves to #622's merge on craft-libs main before this merges.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* #5710: craft-print pin follows storytold/craft-libs#622 (230d522)
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* #5710: pin craft-print to merged cancellation fix
* #5710: allow print cancellation after closing the document
* #5710: correct print-cancellation status date
* #5710: clarify when a print job cannot yet be cancelled in the queue
* #5710: isolate Windows print submissions in cancellable helper processes
* #5710: strengthen helper retry and crash-cleanup regressions
* #5710: erase helper inputs before driver work
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* Table formulas: read the Panamanian balboa B/. in numbers
Word's table formula and sort number reader ignores a currency sign or short currency word around a number; the balboa's B/. was not in the list. Add it as a whitespace-delimited sign, as Word reads it: B/. 1,250.50 and 1,250.50 B/. are numbers, while B/.1,250.50 and B/ 1,250.50 are not. Tested in the locale reader and through =SUM(ABOVE); the localization parity doc records the behaviour.
* Table formulas: read the balboa cell in the document's language
The formula test summed a B/. cell through ev, which supplies no document
or language, so a regression in locale selection could pass. Evaluate
=SUM(ABOVE) with a document whose default text is es-PA and a pl-PL
editing language: 1,250.50 is a number under es-PA and not under pl-PL,
so the assertion fails if the formula stops consulting the cell's
language. The converse case reads B/. 1 250,50 from a pl-PL document with
an en-US fallback, which English alone cannot parse.
* docs: close the parenthesis in the localization-parity change note (#3546)
---------
Co-authored-by: Francisco Herrera <14956584+alosslessdev@users.noreply.github.com>
Co-authored-by: FredApps <FredApps@users.noreply.github.com>
* WC6-06: preserve adjustRightInd in DOCX
* WC6-06: honor grid indent defaults and XML order
* Update lockfile for DOCX test dependency
* Format DOCX ordering assertion
* Keep main lockfile for paragraph property PR
* PR 5384: tighten grid indent docs and regression
* PR 5384: match paragraph check formatting
* Alt codes type their character in Find and other text boxes (#4403)
Alt+numpad codes worked only on the page. In a text box (Find what,
Replace with, a dialog's field) the digits were typed instead on Linux,
which sends their text with Alt held; on Windows the box got only what
the system composes, a byte for a code above 255.
A pass before the frame is drawn now gives the focused text box the
same codes as the page: the digits' text is dropped, letting go of Alt
types the character the code names in the same code pages, and a
platform's own composed character is not typed twice (up to 255 the
system's replaces ours, as on the page).
* Alt codes in text boxes: letting go of Alt ends the digits' text
The flag that drops a digit's own text stayed set when no text came
for the last digit, so the first text after the release was lost: on
Windows the system's composed character for a code we name no
character for (CodeRabbit), and on Linux whatever followed a frame
whose digits sent no text (CI). A digit's text comes with its key,
before Alt is let go, so the release now clears the flag everywhere.
* M6: preserve numbered REF results during field updates
Adapt and validate the patch published in WordCraft #4533, retaining main's bounded numbering renderer and adding relative-context/cache guards.
Co-authored-by: Alyosha-dot-shop <218732667+Alyosha-dot-shop@users.noreply.github.com>
* M6: reuse bookmark lookup for numbered REF updates
* REF: use explicit imports for the workspace clippy gate
* #4609: adapt synthetic fixtures to shared document data
* #4609: checkpoint review fixes and isolated validation notes
* #4609: retain rendered REF labels and isolate relative context by list
---------
Co-authored-by: Alyosha-dot-shop <218732667+Alyosha-dot-shop@users.noreply.github.com>
Co-authored-by: Martin Ball <martin.ball@ucscaregroup.co.uk>
* Mini toolbar: hovering a formatting button previews it on the selection (#4664)
Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>
* Keep mini toolbar stable during alignment preview
* Track live mini toolbar anchor during preview
* Mini toolbar: hovering a font, size, highlight or font colour previews it (#4664)
Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>
* Mini toolbar preview: the page holds its scroll position (#4664)
Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>
* Mini toolbar: hovering the highlight and font colour buttons previews their colour (#4664)
Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>
* Mini toolbar: the font list and colour menus mark the choice in effect (#4664)
Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>
* Skip hover previews in context toolbar
* Pass preview mode in toolbar test
* Font list: a picked family keeps its place until the list next opens (#4664)
Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>
* Font and size lists close when an entry is picked (#4664)
Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>
* Mini toolbar: a clicked button holds its preview until the pointer leaves (#4664)
Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>
* Mini toolbar: a button already on does not preview (#4664)
Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>
* Alignment buttons follow the paragraph a selection covers; a toggle previews its undo on return (#4664)
Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>
* Font list: a recent family is marked as chosen in Recently Used Fonts only (#4664)
Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Sonnet 5.5 <noreply@anthropic.com>
Co-authored-by: Fluorine <joseph.anglada92@gmail.com>
* #3614: reuse paragraph-prefix lookups during ink discovery
* Update ink lookup status date (#3614)
---------
Co-authored-by: Martin Ball <martin.ball@ucscaregroup.co.uk>
Spelling as you type now notes that a web or e-mail address after a
no-break, narrow no-break (U+202F), figure (U+2007) or ideographic space
is not marked while Ignore web and file addresses is on, as
address_after_a_wide_space_is_an_internet_token in craft-proof checks.
* Arabic interface: mirrored right-to-left window and Arabic UI fonts
Adds the Arabic (`ar`) interface language's code: its catalogs are craft-i18n's
`locales/ar`, so this changes no catalog.
- `ar` is registered in `i18n::LANGUAGES` and `Lang::rtl()` says it is written
right to left; its translations are used as written (egui's text layout
orders each line's bidi text itself). A ribbon location reads from the right
with a leftwards mark.
- `rtl.rs`: the window is mirrored. Containers open in `rtl::root`; columns,
grids, checkboxes, radio buttons, menus, rows, panels, the dialog tab strip
and the ribbon's scrolling row follow the language's direction. Title bar,
status bar, ribbon tabs and groups, File pages (including Print, with the
settings on the right and a solid scrollbar gutter), dialogs, menus and the
task panes (their docking edge swaps) are laid out from the right. egui's
`Grid` panics in a right-aligned layout, so grids go through `rtl::grid`.
- Arabic UI font fallback: the craft-fonts Arabic face, else an installed
Arabic font, loaded when the interface is Arabic.
- The "Auto (200%)" size label keeps its percent sign inside the isolated
number.
- Tests: Arabic locale, saved preference and lookup order on fixture catalogs;
an interface audit (skipped without the craft-i18n Arabic catalog) that lays
the app out right to left at several widths, checks tab, group, pane, Print
and Go To positions and that nothing panics.
The Arabic work builds on Abdelhaq El Amraoui's mirrored-interface PR (#737).
Co-Authored-By: Abdelhaq El Amraoui <abdelhaqelamraoui@gmail.com>
Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>
* Arabic interface: pin craft-i18n at a commit with the Arabic catalog; review fixes
- craft-i18n.rev and the Flatpak manifest pin 19358491 (craft-i18n main), the
first commit line that has locales/ar/wordcraft.tsv. The old pin had no
Arabic catalog, so `ar` was registered but not embedded and two i18n tests
(the_language_setting_is_a_ui_command_and_persists,
the_languages_offered_are_the_embedded_ones_of_the_list) failed in CI.
- The Arabic font fallback is requested for any right-to-left interface
(`Lang::rtl()`), not only after the language picker sets the flag, so an
automatic or saved Arabic gets the installed Arabic face.
- The file browser, the update window and Reading Mode's toolbar run their
bodies in `rtl::root`, so their far-side buttons and rows are mirrored.
- A group in a right-to-left ribbon row is measured from the right edge: the
cursor's left edge is negative infinity there, so its width was NaN and the
ribbon planner dropped every group, never compacting a narrow Arabic window.
A narrow window now folds groups into drop-downs.
- The mirrored checkbox and radio marks are labelled by their text, so screen
readers name them.
- Tests: group width in a right-to-left row; the Arabic interface audit checks
Reading Mode's toolbar.
Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>
* Arabic interface: ask for the installed Arabic font separately from the CJK one
A previous commit made every right-to-left interface request the installed CJK
fallback font (`system_cjk`) so that the installed Arabic font would load. That
also made every Arabic launch read a large system CJK font file when no
craft-fonts input is embedded (the Flatpak build has none).
`install_ui_fonts` now passes a separate `system_arabic` flag (`Lang::rtl()`):
the installed Arabic font is read for it, and `system_cjk` is again set only
by a CJK interface or by CJK text on screen. `WordApp::fonts_system_arabic`
remembers what was installed, so a language change reinstalls the fonts.
Tests: the_installed_arabic_font_is_asked_for_by_arabic_alone (the Arabic flag
adds the installed font only when none is embedded, and the CJK request alone
adds no Arabic font). Checked a headless screenshot of the Arabic interface
without craft-fonts: the installed Arabic font draws the labels.
Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>
* Fix the AutoSave switch knob: on is at the right, mirrored in Arabic
The title bar's AutoSave knob was placed with `lead_x(rtl == on, ..)`, which
reverses main's mapping in both directions: left to right it drew the knob at
the left when the switch was on, and right to left at the right. main draws it
at the right when on and at the left when off, so the mirrored interface must
draw it at the left when on: `rtl != on`.
The position is now `autosave_knob_x(rtl, on, track)`, pinned by a test for all
four cases. A headless screenshot of the off switch shows the knob at the left
in English and at the right in Arabic.
Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>
* Arabic interface: file names and paths in right-to-left lines; kerning row order
Tester feedback on the Arabic interface:
- File > Open's Recent list, the built-in file browser and the title bar drew
file names and paths raw, from the left edge. In an Arabic line the marks of
a name ("(نهائي) 2.docx") and the folders of a path with Arabic parts were
scrambled. Rows now start at the side reading starts from (`rtl::lead_x`),
names go through `i18n::isolate` (a first-strong isolate, with a left-to-right
mark before the extension so `2.docx` stays `2.docx`) and paths through
`i18n::isolate_path` (a left-to-right isolate with a mark after every
separator, so neighbouring Arabic folders do not swap). Other languages get
the text untouched; saved and spoken text never carries the marks.
- Font dialog, Kerning row: the dialog's grid is drawn left to right inside a
right-to-left window, so "Points and above" came after its number; in an
Arabic interface it now comes first, so the line reads "14 نقطة فأكثر" from the
right. (The grid's columns themselves still keep their left-to-right order.)
Tests: names_and_paths_are_isolated_in_a_right_to_left_interface.
Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>
* Arabic interface: mirror through craft_ui::direction and Style::right_to_left
The suite's craft-ui now has the direction helpers (`craft_ui::direction`) and
its egui fork a `Style::right_to_left` that mirrors egui's own chrome. Use them
instead of our parallel wrappers:
- `rtl::sync(ctx)` applies the interface direction every frame the language's
changes (`direction::apply`): it sets the shared direction state and
`Style::right_to_left` on every theme, which draws check boxes and radio
buttons with the mark at the reading start, mirrors submenus, scroll bars,
title bars and the combo boxes' arrows (the Print page's choice lists, the
font list) and opens combo menus from the right.
- `rtl::checkbox`, `radio_value`, `radio` and `indeterminate_checkbox` are
gone: about 200 call sites use plain `ui.checkbox`, `ui.radio_value`, ... and
egui does the mirroring (and names the control by its text, as a plain widget).
- `lead_x`, `lead_center`, `lead_top`, `start_panel` and `end_panel` delegate to
`craft_ui::direction`. `root`, `flows`, `island`, `grid`, `menu`, `vertical`,
`far_side` and the other layout helpers stay: the shared crate has no
equivalent that fits them.
Visual changes: the combo boxes' drop-down arrows and lists are mirrored in
Arabic; nothing changes in left-to-right languages (checked headless
screenshots of the English main window, Font dialog and Print page).
Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>
* Recent files and the file browser: full path on hover, long names keep their start
Review feedback:
- Each row of File > Open's Recent list shows the document's full path as its
tooltip (the path line under the name can be longer than the row).
- A long name in the built-in file browser is laid out in one row, with an
ellipsis at its end, from the side reading starts from, instead of being
clipped at the row's edge: in a right-to-left interface the old text anchored
at the right edge cut the end of an Arabic name and the start of a Latin one.
The whole name is the row's tooltip when it was shortened.
Checked headless screenshots of the file browser with a long English and a long
Arabic name.
Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>
* Font combos in a right-to-left row: the arrow joins its field on the left
The ribbon's font name and size boxes are drawn from a field and a separate
arrow box that share one outline: the field is square and the arrow's box is
rounded on the side where the arrow goes, painted a border width under the
field. That assumed the arrow is right of the field. In a right-to-left row
(the Arabic ribbon) the arrow comes after the field on its left, so the field
was square on the wrong side and the arrow box rounded on the side facing the
field: two boxes with a gap-like seam, the arrow looking outside the frame.
`arrow_box_shape(rtl, ..)` mirrors the radii and the underlap, and the field's
square corners are chosen by the row's direction (the nw/sw pair in right to
left). Left-to-right rows are drawn exactly as before (English before/after
crops are identical).
Test: the_arrow_box_is_rounded_away_from_its_field.
Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>
* Pin craft-i18n 4612850 (merged Arabic WordCraft rows, craft-i18n#76)
The pin and the Flatpak manifest commit move from 1935849 to 4612850, which is on
craft-i18n main and adds the 70 Arabic rows this branch relies on.
Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>
* Pin craft-i18n cac2cf0 (Arabic number agreement and status-bar rows)
Moves the pin and the Flatpak manifest commit from 4612850 to the current craft-i18n
main, which includes craft-i18n#95 (48bed03) and #81 (ef58ff3).
Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>
* Arabic: isolate paths shown beside labels; mirror the Print page zoom
File > Info shows Location as its own left-to-right path label (cut short with the full path on hover, not wrapped), and the open-failure, Exported and dictionary-file messages isolate their paths. The Print preview zoom puts minus at the slider's left end and plus at its right in Arabic, as the status bar does.
Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>
* Arabic: mirror the label/field rows of the Font, Info, Paragraph, Page Setup, Insert Table and Options forms
rtl::Table lays a form out as an egui Grid in a left-to-right interface (same id, columns and spacing, so the output is unchanged) and, where the interface is mirrored, with each row's cells running from the right, every column as wide as its widest cell. File > Info puts Properties at the right and Statistics after it, and the Font dialog's kerning row reads 14 points and above.
Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>
* Docs: record the mirrored Arabic interface in the roadmap, gaps and localization parity
Progress log, the Arabic language row, gap 11 and the status lines and revision histories of the three docs.
Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>
* Arabic interface: Insert Hyperlink, Word Count, Phonetic Guide, New Style, Modify Style, Encrypt, merge rule and Match Fields dialogs read right to left
Their label-and-field rows use rtl::Table, so in a mirrored interface the label is at the right with its field to its left. rtl::Table gains striped() for Match Fields. English renders are pixel-identical (only a caret-blink strip differs in an untouched dialog).
Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>
* Arabic interface: Line Numbers, Hyphenation, Drop Cap, Caption, Cross-reference, Index, Mark Index Entry and Source dialogs read right to left
Their label-and-field rows use rtl::Table (label at the right, field to its left). English renders are pixel-identical.
Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>
* Arabic interface: Picture Size, Split Cells, Convert Text to Table, Footnote and Endnote, Table Properties, Cell Options and Custom Properties dialogs read right to left
Their label-and-field rows use rtl::Table. Picture Size's Height and Width pairs read Height first at the right. English renders are pixel-identical.
Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>
* Arabic interface: Define New Multilevel List, Track Changes Options, content control properties, custom colours and table style dialogs read right to left
Label, field and swatch rows use rtl::Table. English renders are pixel-identical.
Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>
* Arabic interface: Columns widths, Special Characters, Compare, AutoCorrect and About Models tables read right to left
Table columns now start at the right edge (rtl::Table gains top(), min_row_height() and an unset column count). About > Models stays a left-to-right scroll box with its columns listed from the right. English renders are pixel-identical (only the caret blink differs).
Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>
* Arabic interface: table-of-contents styles, recipient filter and sort, and the ribbon Paragraph group read right to left
rtl::Table now stacks its rows top to bottom whatever way the area around it runs (a ribbon group lays out in a row). English renders are pixel-identical (caret blink and a status toast differ in untouched dialogs). The TOC options and recipient filter/sort rows are converted by pattern and not seen in an image.
Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>
* Arabic interface: Columns preset tiles and Preview label, Macros, Add/Remove arrows, Zoom slider and the Recipient List grid
A preset tile is as wide as its caption and centres it (the long Arabic captions ran into the next tile); the Preview column keeps its width so its label no longer wraps letter by letter; Macros puts the name box and list at the reading start with the buttons beside them; the Add >> and << Remove arrows swap in a mirrored interface so they point the way the items move; the Zoom slider is drawn left to right as in English; the Recipient List data grid scrolls left to right instead of running past the left edge. English renders are pixel-identical.
Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>
* Arabic interface: the chart type and SmartArt layout galleries list their tiles from the right
The chart type dialog, the Insert SmartArt dialog and the ribbon's SmartArt Layouts gallery use rtl::Table rows, so the first tile sits at the reading start. English renders are pixel-identical.
Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>
* Take main's panes/host.rs after the merge
The merge kept a use of mirrored() that main's pane-dock fix removed; this branch does not touch the panes.
Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>
* Arabic interface: Columns preset captions are translated in the mirrored tile
Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>
* Arabic: one Arabic and one French row in the localization parity table; About > Models columns read from the right
The merge left the Arabic and French rows twice in docs/localization-parity.md; each
is now a single row (main's current French text, the Arabic row with the dialogs
note). About > Models keeps main's fitted table but lists its columns, their
alignments and grow weights reversed when the interface is mirrored, so Company
starts at the reading edge. The credits.rs change comes from tareq's helper merge.
Co-authored-by: tareq <tareq.halaby@gmail.com>
Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>
* About > Models: the mirrored table keeps its own widths and scroll position
The columns are listed in reverse when the interface is mirrored, and egui keeps the
resizable column widths and the scroll offset by id. A language switched at run time
would apply one direction's widths to the other's columns, so the mirrored table uses
its own id.
Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>
* Arabic interface: About > Models alignment mirrors as its comment says
The mirrored Models table reversed the per-column right-align flags but
did not negate them, so in Arabic the text columns stayed left-aligned and
the counts right-aligned, the opposite of the comment ("counts line up on
the right (left in RTL)"). Negate after reversing so the text sits at the
reading edge and the counts on the left. Keep this line when touching
models_ui.
* About > Models: a mirrored table that overflows opens at its reading edge
The reversed Arabic table puts Company in the rightmost column, but the
horizontal scroll area started at the left, so when the table was wider
than the dialog (narrow window, widened columns) Company and Model were
offscreen. Stick the scroll area to the right in a mirrored interface.
---------
Co-authored-by: Abdelhaq El Amraoui <abdelhaqelamraoui@gmail.com>
Co-authored-by: Claude Sonnet 5.5 <noreply@anthropic.com>
Co-authored-by: email <email@email.com>
Co-authored-by: tareq <tareq.halaby@gmail.com>
Co-authored-by: FredApps <153173854+FredApps@users.noreply.github.com>
Martin Ballandmatstrange
ashandClaude Opus 5.5
ro-legal-docxandClaude Opus 5.5
Harrison Booth
ljkx
.CooCoo
Aleksander HelgakerandClaude Opus 5.5
RatkoRandClaude Opus 5.5
mmazzieriandClaude Opus 5.5
FredApps
jpc7k1andClaude Opus 5.5
LQRDandClaude Opus 5.5
VoiceLessQ
midasdfandClaude Opus 5.5