* Print in grayscale prints on a Windows driver with no grey option (#5806)
Windows refused Print in grayscale ("the printer's driver did not retain the requested
grayscale; nothing was sent") on drivers that list no grey option the ticket can name:
Microsoft Print to PDF, and an HP Photosmart driver whose grey is its own vendor setting.
- On Windows, a grayscale job's copy for the spooler is made grey first with Convert colours
(all pages, comments and form fields, black kept black, pictures re-encoded where they can
be), and the job says so (Job::grey_pages). The driver is still asked for grey where it has
it; one without prints the grey pages instead of refusing them. A copy that can't be read
goes as it is and asks the driver strictly, as before.
- craft-print 970644b7 (storytold/craft-libs#774) adds Job::grey_pages and asks a driver that
lists only psk:Grayscale for that, not psk:Monochrome.
- Both the Print dialog and doc_print go through spooler_copy, which now takes the job.
* craft-print 1146cdc4: craft-libs main with #774 (grey pages) and #773 (the CUPS printer list waits at most 15 s, storytold/pdfcraft#6761)
* M10: a booklet's both sides follow a driver that keeps its own two-sided setting (#5772)
Booklet ▸ Both sides always asked for two-sided printing on the short
edge (#2707). A driver that doesn't take two-sided settings from other
programs (no two-sided printing, manual two-sided only in its
Properties, Microsoft Print to PDF) then made craft-print refuse the
whole job. The reporter's Epson ET-2870 offers only OneSided, and its
manual two-sided setting is what prints their normal two-sided jobs.
print::booklet_job_duplex asks such a driver for nothing on both
sides, so its own setting applies, as for ordinary printing (#2422)
and as Acrobat enables two-sided for a booklet only "if available".
Unknown support still asks for the short edge; one side on its own
stays one-sided. The Print dialog takes the chosen printer's support
from the printer list (PrintDraft::printer_two_sided, also behind its
"its own setting applies" note), and doc_print reads it only for a
booklet's both sides.
The dialog's booklet test used the machine's printers, and on Windows
the default, Microsoft Print to PDF, now gives the other answer: it
sets its own printers and checks the note too.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* M10: doc_print's lookup of a booklet printer's two-sided support is tested (#5772)
The booklet test fed job_duplex the printer's answer directly, so a
lookup that missed the default printer or matched the wrong one would
have gone unnoticed. The search over the printer list is now its own
function, two_sided_in, tested with a list of named, default and
unknown printers.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* M10: a booklet printed to "default" goes to the printer whose driver was asked (#5772)
doc_print decides a booklet's both sides from the printer's two-sided
support. For "default", the job named no printer, so the spooler picked
whichever printer was the default when the job was submitted, after the
document was rendered. The printer found in the list is now the job's
printer, by name, and the lookup test covers a one-sided default.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* #5903: the booklet test lists its printers through a stand-in source
It set the dialog's printer list by hand while the real list was still loading. On a machine with
no printers (CI's Linux runner) the list that arrived replaced them and reset the printer, so the
dialog the test clicked through was not the one it set up. The printers now come from the
dialog's own source, drivers unasked as #3554 lists them, with each driver's two-sided answer in
the map.
---------
Co-authored-by: austin62jake <340374338+austin62jake@users.noreply.github.com>
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
Co-authored-by: FredApps <153173854+FredApps@users.noreply.github.com>
* fix(ui-egui): keep hotbar picker stationary while resizing
* fix(ui-egui): keep hotbar picker pinned during keyboard resize
Pin the Hotbar tools picker while the Toolbar size slider is adjusted with the arrow keys, until the slider loses focus. Widen the regression test to both drag directions and every layout, add a keyboard test, and document the new helpers.
* fix(ui-egui): closing the hotbar picker ends a size adjustment
close_picker() also clears picker_drag_pos and keyboard_sizing. Main's
close_hidden_picker() closes the picker on passes that don't draw the
hotbar, where show() can't clear them, and the next opening would start
at the held position. Adds closing_the_picker_ends_a_size_adjustment, a
doc comment for picker_drag_pos, and says "picker" where the comment
meant it.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: FredApps <FredApps@users.noreply.github.com>
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* fix(print): keep the localized reset label off the properties panel title
The header of Print ▸ Properties… laid the title out first and gave what
was left of the row to Done and Reset. When the translated "Reset to
printer defaults" needs more room than that, egui keeps placing the two
buttons from the right edge of the child leftwards and paints them back
over the title: in Italian the label is 51 characters against 25 in
English, and both strings end up unreadable (#5545).
Laid out with egui::Sides::shrink_left().truncate instead: the buttons
take their room first and the title takes what is left of the row, cut
with an ellipsis. Nothing moves in English, where the title still fits.
* test(print): pin the header against every catalog and the title's tooltip
The geometry tests behind #5545 tried English, Italian and German at four
widths. They now walk every catalogued language at the row the settings column
really gives the header (470 px less the frame's 10 px margins), so the longest
translation of "Reset to printer defaults" is covered by the run instead of by a
guess at which locale is the worst one.
Two more tests: hovering the elided title opens a tooltip with the full string,
while a title that fits whole opens none; and a row too narrow to give the title
even an ellipsis leaves it out instead of painting it back over the buttons.
That last case is why driver_options_header returns Option<Response>. Bulgarian
(370 px of button), Spanish (365) and Ukrainian (361) fill the row with the two
buttons alone at 450 px: the ellipsis is 12.4 px wide and the clearance was
0.1 px, so a pixel less and the label was painted over the buttons again.
---------
Co-authored-by: Jarvis (Hermes) <jarvis@localhost>
Co-authored-by: FredApps <153173854+FredApps@users.noreply.github.com>
iOS Markup keeps a private copy of a page's markup (/AAPL:PPK, /AAPL:PPKHash on the page,
/AAPL:AKExtras on each annotation) and draws from it. Once /Annots changes, that copy is stale:
iOS 26 drew a Markup signature twice. Adding, deleting or answering a comment now drops the copy,
records the drop in the repair log, and leaves a refused edit untouched.
The change lives in lookup.rs (change_annots), called from create.rs (add) and modify.rs (delete,
reply, mark). Each of the four operations has a regression test on an Apple Markup page.
Co-authored-by: BabaKush <101988920+BabaKush@users.noreply.github.com>
Brings back #2381 (by regendorf-ux), which #6706 reverted before v0.20.0 because its page-setup
rows made the Print dialog as tall as Preferences and failed the dialog-height test.
- Custom… beside Paper adds a named size in the preferences' unit (1 to 200 inches a side),
kept with the settings; Remove takes it off the list. doc_print takes sizes such as 8.5x14in.
- #2381's "Remember this paper for <printer>" box and its separate printer-to-paper map are left
out: since #6779 every printer keeps its paper, sizing and two-sided choice on its own (#2001).
That setup now keeps the paper by name, so a custom paper is found again however the list
changes, and one removed since leaves the paper as it is.
- The dialog scrolls within the screen since #6223, so the Custom… row no longer grows it.
- The Print part of the settings restore is its own function (clippy's complexity limit).
Co-authored-by: regendorf-ux <osvaldo.duran09@gmail.com>
Co-authored-by: regendorf-ux <338149330+regendorf-ux@users.noreply.github.com>
* M10: Windows prints a large image whole: drawn as tiles under Windows.Data.Pdf's cap (#5131)
Windows prints each page through Windows.Data.Pdf, which draws any image
of more than 2^22 pixels from a copy shrunk to that size. With the page
at the printer's resolution (craft-libs#396, #5023), a 6000 x 6000 scan
still printed as 2048 x 2048, its one-pixel detail gone.
pdfcraft_optimize::tile_large_images replaces each such image XObject
with a form XObject of the same object number that draws it as tiles of
at most 2000 pixels a side, so whatever drew the image draws the tiles.
Samples are copied as stored (any bit depth and colour space, decode
array, interpolation, colour key); a grey or RGB JPEG is decoded and
stored with Flate; a soft or stencil mask of the image's size is cut
into the same tiles. Tiles overlap by a pixel against drivers that
soften image edges, except under a soft mask, where the overlap would
blend see-through pixels twice. JPEG 2000, CMYK or ambiguous JPEGs,
masks of another size, more than 80 million pixels, short data and
images past the decode allowance are left whole.
pdfcraft_engine::spooler::spooler_copy applies it to the copy that goes
to the spooler on Windows, from the Print dialog's worker and doc_print;
elsewhere, or when the copy can't be read or written, the bytes go as
they are. The saved print-ready PDF is unchanged.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* M10: a test that the spooler gets the tiles on Windows; tiles are up to 2001 px (#5131)
spooler_copy was only tested with prints that pass through unchanged, so
one that skipped tiling on Windows would have passed. A test now checks
that on Windows it sends the tiled copy and elsewhere the bytes as they
are. The optimize README said tiles have at most 2000 pixels a side;
with the overlap they have 2001.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* M10: the tiles' samples are StoredSamples, apart from the crate's Samples (#5131)
main has since added a public `Samples` (8-bit grey or RGB, for tools
that repaint an image), so two different things in one crate shared a
name. The tiles keep an image's samples as stored, in its own colour
space and depth, so each tile redraws exactly what it replaces; the
type now says so in its name and doc comment.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: austin62jake <340374338+austin62jake@users.noreply.github.com>
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
Co-authored-by: FredApps <153173854+FredApps@users.noreply.github.com>
storytold/craft-libs#761 moves winprint to 3c978dfc: winprint.rs#19 draws each page at the
job's resolution instead of ~96 dpi (#4941, #2676), #12 writes QName ticket values as
prefix:local (#3823), #3 accepts whitespace around integer capabilities (#2430). Only the
craft-print and winprint lock entries move, plus winprint's windows-numerics dependency.
* M10 #5130: resolve Windows printer-default duplex before spooling
* M10 #5130: document printer duplex resolution
* M10 #5130: adopt DocumentDuplex driver fix from craft-print
* M10 #5130: adopt two-sided capability selection fix
* M10 #5130: update documented craft-print revision
* M10 #5130: fall back when Windows duplex defaults cannot be read
* fix(print): satisfy duplex review formatting and refresh shared pin
* Repin craft-print to craft-libs main (#411 and #133 merged); ask only the picked printer's driver for two-sided support
craft-libs b6b8a55b has #411 (DocumentDuplex) and #133 (two_sided(name)). The
Printer default support check now reads that one driver instead of listing
every printer's capabilities at submit time (#2192).
---------
Co-authored-by: robertobulltech <341520377+robertobulltech@users.noreply.github.com>
Co-authored-by: FredApps <153173854+FredApps@users.noreply.github.com>
* Print: list printers without asking drivers; ask only about the one picked (#2192)
On Windows, craft-print's printers() reads every driver's capabilities to
report two-sided support. Windows takes about 48 s to give up on a printer
it can't reach, such as a WSD printer on another network, so the Print
dialog waited for each one before it listed anything (#2192).
The dialog now lists printers from craft-print's printer_queues(), which
asks no driver, and asks two_sided() about the printer the user picks, on
a background thread (PdfCraftApp::two_sided_source, set by the desktop app
like printer_source). Each answer is kept for the session, so a printer is
asked about at most once, and one nobody picks is never waited on. The
"doesn't take two-sided settings" note shows once the answer arrives.
The automation printers tool still uses printers(), so it keeps reporting
two_sided.
Needs the craft-libs change that adds craft_print::two_sided.
* Build: take craft-print from storytold/craft-libs#133
Pins craft-print to the head of storytold/craft-libs#133 (b6a3b87), which
adds craft_print::two_sided as one commit on craft-libs main at 5ee809f.
craft-print is otherwise unchanged from 7ee35a9, the rev main pins now; the
other craft-libs crates stay where they are. Fetched through the
storytold/craft-libs URL, so cargo-deny's allow-git is unchanged. To be
replaced by the merge commit once #133 lands.
* Print: run at most four two-sided reads at once
A driver Windows can't reach holds its two-sided read for about 48 s, so
picking printer after printer started a thread for each. At most four now
run at once; past that, the printer picked is asked once a read finishes.
Tests: hanging reads are capped and the picked printer is asked after one
finishes; a list that already says whether a driver takes two-sided
settings is used as it is, with no driver asked.
* Repin craft-print to craft-libs main, where #133 merged (b6b8a55b)
---------
Co-authored-by: FredApps <153173854+FredApps@users.noreply.github.com>
FredApps
Kyle KassenandFredApps
BFlat
huppifluppandFredApps
KiwiKwiandBabaKush
Hazel Granados
ljkx
Aleksander Helgaker
Eric Kaden
mtlcl410
Piohrun
Osvaldo Duran MelendezandClaude Sonnet 5.5
jonathanwxh-cell
Hitesh
robertobulltech
Ken Mantle
.CooCoo
art804andFredApps