Reload Footage empties the RAM preview, but an idle pass of
persist_missing may already hold a frame from before the reload. It
took the cache's drop generation when it ran, after the drop, so the old
pixels could be written back and, with the file's size and time
unchanged, served again after a restart.
Each RAM frame now keeps the disk cache its render started with and
that cache's drop generation then. persist_missing writes a frame only
to that cache, with that generation, and skips it once one of its files
was dropped since; a frame rendered without that cache is not written
from there.
Tests use tempfile directories (the layer drop test, the frame_files
folders under target/).
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
- A reload while the disk cache is off is kept on the session
(pending_disk_drops) and applied when the cache is switched on, before
anything is read from it.
- Each render takes the cache's drop generation before it reads (frame
worker; layer cache at the miss). An entry listing a file dropped after
that is refused under the queue's lock, so a render that was under way
during the reload can't store pixels from before it. Such a frame is
shown with an incomplete file list, so persist_missing skips it too.
The per-file record is bounded (past it, everything older is refused).
- An entry read while its drop was pending is a miss even when the
writer ends the sweep between the read and the check (a stale hit
found under load): the pending drops and the generation are taken
before the entry is read.
- Test: a reopened project serves its frame from disk with no source file
opened or decoded.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
An empty first paragraph draws no glyph, but in a box its face sets the
first baseline that places every later line. The read list took faces only
from glyphs, so it could be complete without that file. Note each style
run's resolved face as well.
The font-reads and confine tests use tempfile::tempdir(): a fresh
directory per run, removed on panic too.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
- Buffers made under `Renderer::recorded` (layer content, a Time effect's input, an adjustment
layer's footprint) evaluate their masks, shapes and effects with the context that notes into
the buffer's own read log, so a file an expression reads (`sampleImage`, also at shutter times
mask motion blur adds and the cache key doesn't see) is in the buffer's files.
- A styled layer served from the cache lists the files of the cached body and passes too, so
the buffers made of it (flattened, blending space) don't get a complete list when one of them
came with an incomplete one.
- A character put in by Character Offset or Character Value without a relayout notes the font
it is drawn with; a fallback face (or none) leaves the list incomplete.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
A mask with Mask Motion Blur On blurs even when the layer's own switch is off,
as long as the render's gate is open (Render Settings motion blur, and with
Switches Affect Nested Comps the precomp layers above). The key held the
layer's own motion blur state only, so a buffer blurred with the gate open was
reused with it closed (and the other way round), also from the disk cache.
Masked layer, input and footprint keys now tell a closed gate apart.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
A layer whose effect reads another layer (Gradient Wipe, Set Matte, Blend…) gets
that layer drawn by its own renderer. Through a precomp layer, Switches Affect
Nested Comps, the switches inherited from the precomp layers above and motion
blur on change those pixels, but the key held only the layers' own switches: a
buffer made with the setting on was reused (from memory or the disk cache) with
it off. Such layers now derive their key with what the renderer passes down.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Layer entries share the frame entries' file list layout, which now stores the
full i128 modification time: the layer entry format version goes to
layer-entry-files-2. The module doc names the font files text is drawn with
among an entry's source files, and what keeps a list incomplete.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
A frame entry's file list stores a file's modification time as i128 nanoseconds
since 1970 (negative before), as the file stamps now keep it; the frame entry
format version goes to frame-entry-files-2 so entries in the old layout are not
read.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
EvalCtx carries the render's read log. A sampleImage render records its footage
reads, keeps them with its per-thread cached buffer and notes them in the
evaluating render's log on every use. Text notes the font files it is drawn with,
with the identity their bytes were read with; a family that isn't installed, a
fallback or missing glyph, or a font from memory leaves the list incomplete.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
LayerCache::insert returns the files of the buffer it keeps, and Renderer::keep
notes them in the render's log and returns them, so a render that uses another
worker's buffer lists that buffer's files (a file changed between the two reads
then has two identities and the list is incomplete).
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Footage outside the read roots shows nothing and was noted as no file at all, so a
picture made without it had a complete, empty list and could be kept on disk for
a later session with other roots. A refused read during `recording` now marks the
list incomplete.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
A file's modification time was nanoseconds since 1970 as u64: a time before 1970
read as "no time" (two such files of one size looked alike) and times after 2554
were truncated. It is now i128 nanoseconds, negative before the epoch; None only
means the file system has no time. The content-key hash writes a presence tag and
the full value.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
File > Reload Footage now deletes the frame and layer entries whose file
lists name the reloaded item's files (DiskCache::drop_files), so a file
replaced by one with the same size and modification time, which the
check on hit can't tell apart, is read again. The index knows keys, not
files: the writer thread reads the files section at the start of each
frame and layer entry (not the pixels) after the writes queued before
it, and deletes the entries that list one of the files. Until it is
done, an entry made of one of them is a miss and frames aren't linked to
new keys. The entries are gone for good, so they don't come back after a
restart. Automatic reloads don't drop anything: they follow a changed
stamp, which the check on hit catches. The browser needs nothing (its
file identities are content hashes).
Removed: disk_cache::seal, which steps 2 and 3 left without callers (the
tests use seal_format). Updated the module, seal_format and forget_media
docs, and docs/architecture.md / docs/web.md describe the final design:
what is cached, keys from memory, file lists checked on hit, nothing
scans the project, incomplete lists stay in memory, Reload Footage drops
entries, edits keep the frames they can't change.
Tests: render unit tests (same size and time passes the check but not
the drop; other files' entries stay; an entry queued before the drop is
dropped; a layer entry too; written again afterwards it is used; the
drop survives a restart; a pending drop is a miss), and an engine test
through file.reloadFootage.
Closes#3184. Part of #1492.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
With an expression anywhere in the project, every comp's disk key hashed
every item of the project, so any edit (another comp, an unused footage
item) threw away every comp's frames on disk. The key now covers what the
comp can draw plus what the expressions among it can reach
(Project::pixel_reach):
- without expressions: the items the comp draws, without silent layers,
plus the footage its precomp layers swap in (Media Replacement);
- with expressions: every layer of the comps they reach, their markers,
the comps and footage they name with string literals (comp("Name"),
footage("Name")) together with which items have those names now, and
the footage named like a reached source (its data is read by name);
- the whole project when an expression computes a name, uses the object
model's constructors or internals, dynamic code, computed keys or
writes, or text the scanner can't read for sure (regex literals,
template strings, escapes): expression_reach errs towards reaching more.
Markers count only where an expression can read them (#1083). Memory
only, no file is looked at.
Tests: scanner and reach unit tests in the project crate; engine tests
for the key (own-comp expressions keep the key through edits elsewhere,
comp("Other") follows Other and not a third comp, a second comp taking
the name counts, a computed name counts every item, markers read from
another comp); a ui-egui test that the disk frames outside an expression
layer are carried when the comp it names changes.
Part of #3184. Part of #1492.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Part of #3184 (step 3 of 4).
- A frame-blended footage frame's layer-cache key now hashes the
sequence's file list: with no project-wide salt, two projects whose
items share an id and a first frame must not share its disk entry.
- Test: a frame worker syncing, patching and rendering a project with an
unused 5000-frame sequence asks its file hook only about the file its
buffer reads (the salt asked about every file at every sync).
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Part of #3184 (step 3 of 4).
Layer buffers on disk (and in the browser's layer store) now carry the
files they were made of, like frame entries since step 2, and are checked
against exactly those files when used. The project-wide footage salt is
gone: nothing stamps every footage file any more.
- Layer entry format 4: the buffer's EntryFiles, then the pixels. A hit
checks only the listed files (metadata, or the VirtualFileId hook for
files from memory; Missing must still be missing); a change, a damaged
entry or the old format 0 is a miss and the entry is deleted, so the
re-rendered buffer replaces it. A hit reports its file list, so frames
made of buffers from disk are complete and get stored again.
- Buffers whose files can't all be named are not written.
- Layer disk keys: layer_disk_key = hash of the layer entry version, the
renderer version and the layer cache key (which names the footage items
with their paths and settings, from memory).
- PrefetchStore checks on use; an entry made of changed files is dropped
and forgotten, so the new buffer is queued over it. FrameServer passes
its virtual-file hook to its layer cache.
- Removed: footage_salt(_with), file_stamp, footage_stamp,
set_disk_salt, set_store_salt, Session::refresh_disk_salt,
poll_disk_salt, footage_fingerprint, disk_salt, disk_salt_background,
disk_salt_job, DiskSaltJob, the UI's per-frame poll, the salt in
FrameServer and in the availability worker (with its cache_enabled
plumbing). The disk cache is attached as soon as it is configured.
- Docs: architecture.md, web.md.
Tests: layer entries check their files (size, time, missing/back,
folder, damaged, old format, incomplete); virtual files; prefetch store;
media tests with a real pool across restarts (only the changed file is
read, projects with the same item ids never share an entry, missing,
unreadable and damaged never serve stale buffers); engine tests that the
cache is attached at once and edits do no file work (#1926, #3106).
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Part of #3184 (step 2). Fixes#3175: opening a comp no longer stamps every
footage file of the project before its first frame can show.
- The comp's content key (`disk_cache::comp_content_key`) is taken from the
project in memory alone: no footage or proxy file is stamped, no
`VirtualFileId` is asked. `comp_content_key_with` is gone; `frame_key`
hashes a new entry version, so entries of the earlier format are never
looked up again (LRU evicts them).
- Frame entries (formats 2 and 3) store the files the frame read
(`EntryFiles`: size and modification time as read; size and content hash
through `VirtualFileId` for files from memory; missing files), then the
pixels. Formats 0 and 1 read as misses and are deleted.
- Check on hit: `get_frame`/`get_frame_f16` look only at the listed files
(one metadata call each) on the frame worker. A changed, back or unreadable
file, or a damaged entry, is a miss: the entry is deleted and the frame
rendered and stored again.
- A frame whose file list is incomplete is shown but not stored. The RAM
preview keeps each frame's files, so `persist_missing` writes only frames
with a complete list.
- Remote frame worker: `FrameServer` records each frame's reads
(`take_files`); the web worker stores them with the entry and the page
checks them through the file table before using it. The browser's media
epoch existed only for the old key and is removed. Export does not use
frame entries.
- The cache indicator still only asks whether an entry exists.
Tests: entry format round trip and damage, the check per file, and in the
viewer: a changed file re-renders exactly its frames (and a reopen reads the
rest from disk); a frame checks only its own files in a project with a large
unused sequence and the key looks at no file; missing, unreadable files and
damaged entries never serve a stale frame.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Part of #3184: ConfinedFootage forwards FootageSource::recording to the
source it wraps, so renders of an automation session list their files
instead of coming back incomplete. The read tests also render through the
viewer's CancellableFootage wrapper.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Part of #3184 (step 1): renders now report which footage files they read,
each with its identity (size and modification time) as read. Nothing uses
the list yet: images, cache keys and cache behaviour are unchanged.
- render: `reads` module with `FileStamp`, `ReadFile`, `ReadFiles` (sorted,
deduplicated, bounded; marked incomplete when it can't vouch for every
file) and the thread-safe `ReadLog`. `Renderer::reads` collects a frame's
files; `FootageSource::recording` lets a source note what it reads.
`file_stamp` uses the same identity.
- Layer cache entries keep the files their buffer was made of and report
them on every hit; derived entries (styles, blend space, flattened) keep
their base's. Buffers from the disk cache or the browser store don't know
their files yet and mark the list incomplete.
- Media pool: every file read notes its identity, taken from the file it
opens. Decoded frames, opened movies, GIFs, models and EXR channels keep
it with the cache entry, so a frame served from memory reports its file
without touching the disk.
- Viewer frame worker collects each frame's list and carries it to where
the disk entry is written (step 2 stores it).
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Roto Brush: reuse scratch vectors in the distance transform
matting::distance allocated four vectors per column plus a staging copy
and three vectors per row. Run the columns and rows through four reused
scratch vectors instead; the dt1 arithmetic is unchanged.
Fixes#2324
Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>
* Roto Brush: keep the distance transform parallel, with per-split scratch
The previous commit made the column and row passes serial, which was measured
on one thread only. Both passes are parallel again: the column pass runs on a
transposed buffer so every column is a contiguous chunk, and rayon's
for_each_init gives each work split one set of scratch vectors instead of
four allocations per line. The square root is folded into the row pass.
A test keeps the old per-line implementation and checks that the output is
bit-identical on a disk, its inverse, 1xN, Nx1, all-true, all-false, seeds on
the frame edge and a sparse 333x211 pattern. An ignored benchmark prints the
1080p median and the rayon thread count.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Roto matting: size the distance-transform scratch per pass (columns h, rows w)
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Sonnet 5.5 <noreply@anthropic.com>
Co-authored-by: FredApps <153173854+FredApps@users.noreply.github.com>
On a hosted macOS runner the_shader_is_the_reference found 168 of 16384
bytes one step off, just over the 1 % a real GPU is allowed.
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* EXR golden test: hash samples near, not bit for bit (temporary: print the new goldens)
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* EXR golden test: the new near hashes
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
Native division isn't correctly rounded on real GPUs, so
posterize_matches_the_cpu_on_every_8bpc_pair failed on NVIDIA and Apple
GPUs while passing on the software renderer hosted CI uses.
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* AEP import: map the Cryptomatte plug-in to EffectCraft's Cryptomatte
The importer reported every instance of the free Cryptomatte plug-in
(match name `Cryptomatte`) as a lost effect. It now becomes
`ec.3d.cryptomatte`:
- CryptomatteData decodes the plug-in's Settings data (its own
little-endian layout, documented in docs/aep-format.md 3.7): the
Cryptomatte layer name and the selection text, both carried verbatim.
- Output maps to Display / Matte Only (Colors -> Colors, Matted RGBA ->
Matte, Matte Only -> Matte Only). Matted Colors, Selection Mode when on,
keys or expressions and anything else stored are reported, and
unreadable data is reported as damaged.
- EffectCraft's Cryptomatte gains a Layer Name text parameter. A layer the
footage has under exactly that name wins; otherwise the Layer popup
decides as before. The CPU, GPU and pick paths share one resolver
(AuxChannels::resolve_crypto_layer_named). Without it, plug-in layer
names such as Crypto_Material would silently fall back to the first
layer.
On a real production project this takes the effect losses from 132 to 44.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* AEP import: check Cryptomatte against an After Effects 2026 sample of our own
A sample made in After Effects 2026 (plug-in 2.6.6: a fresh effect,
Selection Mode on, each Output item, with read-backs and renders)
corrected three points of the mapping:
- Selection Mode on was dropped silently: After Effects writes it as a
default-state record (tdsb 3) holding 1, which the general reader does
not take. The Cryptomatte step reads that record itself and reports it.
- No Output record is now the plug-in's default Colors, also for an
instance that borrows the project's definition (every instance after
the first), which was reported as having no reliable default and fell
back to EffectCraft's Preview. Keyed or unreadable Output values fall
back to Colors too, still reported.
- Matted Colors imports as Display Matte (the same matte over the layer's
own colours) instead of Preview, still reported as an approximation.
docs/aep-format.md 3.7 gets the sampled Output default, the tdsb 3
Selection Mode record and the real fresh Settings data (an empty text of
length 1 and its MurmurHash3, twice, not cry1 and zeros); docs/aep-import.md
the render comparison with After Effects (Matted RGBA matches; Matte Only
differs in alpha; Colors with no layer chosen shows another layer).
Tests: the exact fresh Settings bytes, tdsb 3 Selection Mode, borrowed
definitions, and an opt-in test against the sample once it is in the
corpus (aep/cryptomatte.aep, ignored until the corpus pin includes it).
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* AEP import: write Cryptomatte's popup items in the test as After Effects does
The injected Cryptomatte definition wrote `pdnm` and `fnam` as `LIST`
chunks. After Effects writes them as plain chunks whose body is chunks
(`NESTED_IDS`), and the reader only looks there, so the tests never read
Output's item names: they passed through the fallback for a definition
with four items and no `pdnm`, which uses the plug-in's own list.
The harness now writes both as After Effects does. New tests check that
the injected definition reads back with its items and instance name,
that Output is mapped by the item the stored index names (items in
another order, case, an unknown item), and that the fallback without a
`pdnm` still works. With the old `LIST` form, or with the mapping
ignoring the items, the new tests fail.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* AEP import: check Cryptomatte's layer and selection against presets of our own
The After Effects 2026 sample 1400 now has two preset compositions that choose a layer and
pick one object (box_red on CryptoObject) or one material (mat_paint on CryptoMaterial).
CryptomatteData reads both as they are; the picked tokens are the EXR manifest's hashes,
which EffectCraft's selection grammar reads the same as the names.
- The u32 at 108 is MurmurHash3 of the selection text with its NUL (three texts).
- A unit test pins the 127-byte preset data; the sample test now covers all eight
compositions with their layer and selection.
- Render check: EffectCraft's matte covers exactly the pixels After Effects draws as
selected, edge coverage within 0.0002. docs/aep-format.md 3.7 and docs/aep-import.md.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Cryptomatte import: report damaged Settings and Selection Mode records
Review follow-ups for #3109:
- CryptomatteData refuses a selection text without its NUL and checks the zero byte
at 112 for an empty text too.
- A Settings record without its data, and a Selection Mode record whose value cannot
be read, are reported as damaged data, not taken as the default.
- Layer Name is the effect's last parameter, so the earlier parameters keep their
indexes and upgraded instances have the same order as new ones.
- A Cryptomatte layer name is matched as given before it is trimmed.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Cryptomatte settings: require the selection's NUL to end its declared length
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Cryptomatte: match rank planes by the exact layer name
crypto_rank_planes looked planes up with a case-insensitive whole-name match, so
layers Crypto_A and crypto_a shared planes. The layer prefix now matches
case-sensitively; component letters still match in either case.
Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>
* Format
Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>
* AEP: the exporter knows Extra::Cryptomatte; rustfmt
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
Co-authored-by: FredApps <153173854+FredApps@users.noreply.github.com>
* #1335: accessibility slice 2: Info, Flowchart, Script Console and the 3D Camera Tracker block named, described and keyboard-operable
The audit gets read-outs, graphics and logs as described items (a name is required in a fixed panel), dedicated maximized scenarios for the panels the shared loop squeezes, and minimum counts for the new zero panels.
Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>
* Review: Enter/Space on a favourite star only toggles it; keyboard activation of a property label; settings page scrolls to focus; sharper UI test assertions
Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>
* Refresh the accessibility audit baseline after merging upstream/main
Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>
* a11y audit: hold the machine-dependent Media Browser scenario to its upper bound
The Media Browser opens on the home folder, so a runner with fewer files finds fewer controls and
the 'improved, lower the entry' check failed in CI. The entry stays an upper bound.
Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>
* Merge upstream/main and updated feat-gap25-a11y-audit into feat-gap25-a11y-panels-2
Brought in the updated feat-gap25-a11y-audit (which already contains upstream/main). Conflict: crates/ui-egui/src/menus.rs, which upstream split into menus/*.rs. Took the slim module and re-applied this branch's Flowchart hunks where the code now lives: nudge() skips the Flowchart (menus/invoke.rs) and Enter is left to the Flowchart in handle_shortcuts (menus/shortcuts.rs).
Also removed a duplicate MACHINE_DEPENDENT const in tests/ui_accessibility_audit.rs that the two branches both added. The audit BASELINE still matches the measured findings.
Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>
* Flowchart: split show() to pass the stricter clippy limits from main
Main now denies cognitive_complexity (30) and too_many_arguments; the
merged flowchart panel exceeded it. The keyboard navigation, the
key-to-node mapping, pan-into-view, node commands, the accessible node
name and the option params move into small helpers with unchanged
behaviour.
Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>
* Camera tracker a11y test: wait for the analysis result instead of one frame
The test pressed Enter, ran one frame and expected to see the background job.
On a fast runner the job starts, ends and is written back inside that frame,
so the state was never seen. Undo the first analysis, press Enter, and wait
(bounded) for the new analysis step in the undo history.
Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>
* Accessibility: one hours range for the accessibility pass in ui-parity.md; test that Flowchart automation labels stay English
Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>
* Flowchart toolbar: keep the English label for the automation registration
The translated text is shown and spoken; the automation label stays English.
Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Sonnet 5.5 <noreply@anthropic.com>
Co-authored-by: OpenAI Codex <noreply@openai.com>
Co-authored-by: FredApps <153173854+FredApps@users.noreply.github.com>
* Timeline: hover texts for the icon-only column headers and layer switches
The Timeline's column header is painted as one click target, so its
icon-only headers (A/V Features, Label, #, the eight switches and the
Modes column's T) had nothing to hover and nothing explained them.
HEADER_TIPS lists each one with a short name and an explanation in our
own words. Hover-only widgets on top of the header show the text, carry a
named ColumnHeader AccessKit node and register automation ids
(timeline.header.av.*, timeline.header.switches.*,
timeline.header.modes.preserveTransparency). The header's clicks and
right-click column menu still work underneath. The layer rows' A/V and
switch toggles and the Preserve Transparency box show the same texts.
The accessibility audit's Timeline baseline drops from 89/42 to 72/25
because the switches now have accessible names.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Timeline headers: accessible description, Preserve Transparency text, English menu test
The header's node is named before its hover text is added, so screen readers get the
explanation; Preserve Transparency says the layer follows the alpha below it, partial alpha
included; the hover test sets English before checking the translated Hide This item.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Merge main: keep both sets of timeline tests
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Timeline tests: close the test before the merged one
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
Co-authored-by: FredApps <153173854+FredApps@users.noreply.github.com>
show() went one over the cognitive complexity limit once #3094 landed on
current main, which failed clippy on every later commit.
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* Cryptomatte: the Layer popup lists the footage's Cryptomatte layers (#473)
The popup was the constant CryptoObject / CryptoMaterial / CryptoAsset. It now lists the
Cryptomatte layers of the layer's OpenEXR footage, and those three when there are none. The
stored value keeps its meaning (0-2 the standard layers, 3 and up the file's other layers in
name order), so older projects render the same.
Refs #473
Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>
* Cryptomatte Layer popup: timeline editor, one menu helper, probe and fallback tests (#473)
Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>
* Cryptomatte Layer popup: give further layers of a standard kind a custom slot
A.CryptoObject keeps slot 0; B.CryptoObject and later ones get 3+ instead of
being dropped, so they can be selected, picked and rendered.
Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>
* Format; note same-kind layers in the footage docs
Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>
* Format the merged code with rustfmt
Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Sonnet 5.5 <noreply@anthropic.com>
* Viewer exposure on the full float range of 32 bpc frames (#2797)
32 bpc viewer frames on the desktop are rendered without the HDR step (skip_hdr_step,
#2916) and kept as half floats in the RAM preview. A display pass on egui-wgpu's device
turns each frame into one RGBA8 texture with mips per viewer, in this order: decode,
exposure in linear light, Compand / Tone Map, encode, display colour, Show Channel,
rounding. Before, exposure was an 8-bit lookup applied after tone mapping, clamping and
the display conversion, so -2 EV could not bring values above 1.0 back.
- engine: viewer::DisplayPass describes the pass as data; its pixel() is the CPU
fallback (no device) and the shader's reference. It replaces exposure_lut /
display_transform. FrameEncoding records a frame's curve and the HDR step it still
needs. 32 bpc snapshots are taken without the HDR step; snapshot_rgba8 applies it.
- ui-egui: FrameImage::CpuF16 (half crate, F16C at run time), byte accounting at 8 bytes
a pixel in the cache and the prefetch estimates; display_gpu.rs + display_gpu.wgsl;
main viewer, snapshot and passive viewers draw through the pass; the 8-bit image other
panels read is made on demand with the HDR step; the Info panel shows float values.
- Half-float frames are not written to the disk cache yet.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Viewer display pass: f16 disk cache entries, window-device gating, review fixes
- Disk cache: half-float frame entries (format byte in the entry header, byte planes +
LZ4); 8-bit entries keep format 0 and stay valid. 32 bpc viewer frames are written and
read again, and the timeline's disk bar sees them. A damaged half-float entry is
deleted.
- The display pass runs on the window's egui-wgpu device, with or without the GPU
compositor (still building, failed, GL fallback). Its pipelines are made inside error
scopes; a backend that rejects them gets the CPU pass instead of a blank viewer.
- A new LUT of the same size (another ICC profile, Preserve RGB, another display) runs
the pass again.
- f32 to f16: one pass per L1-sized block, the NaN / infinity fix-up on the bits, no
fill of the buffer (4K: 4.7 ms, as the 8-bit conversion).
- Mips of odd-sized levels include the last column / row; the snapshot's half floats
and texture go with the snapshot; no placeholder texture ids; u64 size checks.
- Tests: LUT profiles and negative values against the shader, Bake reruns, the passive
viewer's colour, f16 disk round trips; exact comparisons allow 1 LSB on software
rasterizers. Docs: the display pass and the f16 disk entries in architecture.md.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Viewer f16 disk-cache test: temp dir removed on failure too, wait for the queued disk write
Review points: the test's directory was only removed by its last statement
(now tempfile::TempDir), and the frame is released before its disk write is
queued, so flush() could return early (now waits for the entry).
Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>
* Viewer: oversized half-float frames use the CPU display pass, so exposure/HDR come before the averaging down
Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>
* Viewer: fmt and a debug assert for the half-float upload path
Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>
* Disk cache: persist_missing also writes half-float frames
Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>
* Passive viewer: oversized half-float frames take the CPU display pass instead of leaving a stale texture
Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* Masks: set the corner roundness of a Rounded Rectangle mask (#3067)
layer.addMask takes a roundness (corner radius in px) for shape rounded, and the new
mask.setRoundness changes it afterwards on a rectangular mask.
Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>
* Mask roundness: refuse ellipses, keep feather points and key correspondence
mask.setRoundness accepted any closed path whose vertices lie on its bounding
box, so an ellipse was replaced by a rectangle. It now accepts only a plain
rectangle (four corner vertices, straight sides) or a rounded one (eight
vertices, straight sides alternating with circular corners).
The rebuilt path keeps the old start vertex and direction, and its feather
points, so an animated path's other keys and the feather points still line
up. A change between square and rounded corners changes the vertex count; it
is refused when the path is keyed or has feather points instead of leaving
keys with different counts or dropping the points.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Sonnet 5.5 <noreply@anthropic.com>
* Layer: Quick Set Anchor, nine anchor points with Position compensation (#2967)
layer.quickSetAnchor moves the Anchor Point of 2D layers to a corner, edge midpoint or the
centre of their content and shifts Position and its keys so nothing moves. Layer > Transform >
Quick Set Anchor lists the nine points.
Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>
* Quick Set Anchor: skip layers with an animated Anchor Point, Scale or Rotation
The anchor is set at the current time and the Position shift is worked out
from the current Anchor Point, Scale and Rotation, so on a layer where any of
them is keyed or has an expression the layer would move at other frames.
Such layers are skipped like 3D and locked ones (an error when none is left).
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Quick Set Anchor: skip layers with a Position expression or Auto-Orient along the path
An expression on Position (or the separated X/Y) overrides the shifted value,
and Auto-Orient along the path adds a rotation the shift does not account for;
both would make the layer jump, so they are skipped like 3D layers.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Quick Set Anchor: error when no selected layer has content bounds
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Quick Set Anchor: test separated, keyed Position keeps the layer in place
Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Sonnet 5.5 <noreply@anthropic.com>
* Viewer: Alt-drag duplicates the dragged layers (#2968)
Alt/Option-drag of the selected layers in the Composition viewer duplicates them and drags
the copies; the copy and the drag are one undo step. edit.duplicate takes a merge key for it.
Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>
* Alt-drag: duplicate from a 3D gizmo arrow, no double move of a selected child
Alt-dragging a gizmo arrow moved the original; it now duplicates and moves the
copy along the axis. A selected layer whose parent is dragged too follows the
parent, so its own Position no longer gets the drag a second time (with or
without Alt).
Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Sonnet 5.5 <noreply@anthropic.com>
* Project panel: the Name column fits long names and resizes
The Name column was 40 % of the panel and at most 260 points wide, with
no way to resize it, so long item names (compositions of an imported
After Effects project) ended in "..." even in a wide panel.
It now fits the longest listed name, never narrower than before and at
most the panel's width less the Label column (the optional columns keep
scrolling under it). Dragging the column's edge in the header resizes
it, a double-click on the edge fits the names again. The width is kept
in UiState::project_name_w (None = fit the names); the edge has the
automation id project.nameColumn.edge.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Project panel: the Name column leaves room for the optional columns; no name fit for a manual width
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* Timeline: one selection box spans the layer list and the time graph (#3056)
Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>
* Timeline box test: say what it tests
Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>
* Timeline box: a box kept in the time graph selects keys only
Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>
* Format the timeline box test and box_targets signature
Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>
* Timeline box test: drive the real drag across the outline and the time graph
Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Sonnet 5.5 <noreply@anthropic.com>
* Color Stabilizer: sample the reference where the points were at the reference time (#3125)
After Effects 2026 samples the reference frame at the positions the
Black / Mid / White Points had at the reference time. With keyframed
points it therefore corrects even a static picture: our importer sample
(colstab-43-keys, Levels, Black Point (64, 90) -> (151, 99) over 1 s)
renders at 0.5 s as the Levels map out = a + b*v of the ramp with
b 1.2935..1.2965 and a -0.2365..-0.2350, which is the Black Point's
current sample (107.5, 94.5) sent to the reference sample at (64, 90).
EffectCraft sampled both frames at the current points, so the card
stayed unchanged (slope 1). The samples now read the points at the
reference time through the host (params_at), falling back to the
current points without one. CPU and GPU share the sampler
(color_stabilizer_maps).
Sample Size's unit is not pinned by the samples (every size 1..40 leaves
the card unchanged in After Effects; that only bounds the sampled area)
and is left as it is.
Part of #3125
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Linear Wipe: After Effects' edge position and feather profile (#3125)
Measured on our importer samples (linwipe-*, 2026-11-05, After Effects
2026, 320 x 180):
- The edge sits at lo + completion * (hi - lo) whatever the feather (the
set-all render's 50 % line is at -5.25, predicted -5.266); 0 % keeps
the layer and 100 % clears it even with Feather 32000. EffectCraft
extended the travel by the feather, 13 px off at Feather 16.
- The feathered edge is the hard matte blurred with the layer's edges
repeated: three box passes of radius 6 per axis fit Feather 16
(sigma 6.35..6.6, taken as Feather / 2.5), including the extra
opacity where the edge meets the layer's left side. EffectCraft drew
a linear ramp Feather px wide.
- Without feather the edge pixel is anti-aliased (143/255; coverage
gives 0.6). EffectCraft drew a hard step.
set-all alpha: before max 195, 4646 px (8.1 %) off by more than 2/255;
after max 15, 529 px (0.9 %), all along the layer's left side (at most
2 elsewhere). Feather 0 renders: max 112 -> 10 on the edge column.
CPU: coverage matte, raster::gaussian_blur (3 box passes, edges
repeated); GPU: the same matte from gen_linear_wipe (new modes), its
gaussian_blur, then a multiply, so both match. Sigma is capped at twice
the layer's longer side; NaN values leave the layer as it is.
Projects saved before keep the old ramp: a hidden legacyFeather
parameter that migrate::legacy_default sets on upgrade (as for Ripple
and Block Dissolve).
Part of #3125
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Linear Wipe on the GPU: 100 % clears the layer before the angle is read
A NaN angle left the layer unchanged on the GPU while the CPU cleared it.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* AEP import: the report names the After Effects version of the file (#3115)
svap holds the version of the After Effects that wrote a project, head
bytes 4 to 7 the version the file is written for; Save a Copy As 25.x /
24.x of After Effects 2026 keeps svap and writes the older version into
head. AeVersion decodes the packed word (26.2.1x2), AepFile gains
file_version, saved_by_version and head_revision, and ImportReport gains
aeVersion (fileVersion, savedBy, tested; "unknown" when the file does not
say). A version outside 24 to 26 is imported as usual and gets a
limitation line, not a loss.
The 12 corpus families saved as 2026, 25.x and 24.x copies import to the
same project and report; docs/aep-format.md lists what the copies change
in the container. The fixture tests are ignored until the corpus holds
the files.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* AEP import: doc comments on the version tests and helpers
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* AEP import docs: tested is a major-version classification from copies saved by After Effects 2026
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* AEP import docs: the importer reports detected losses, not every loss
Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>
* aep tests: compare the imported settings across version copies too
Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* AEP import: map HDR Highlight Compression, Echo, Linear Wipe, Offset and Color Stabilizer
The importer reported these five effects as lost. They now become
EffectCraft's effects of the same name with every parameter After Effects
stores (ranges, defaults and popup items from our own After Effects 2026
project, documented in docs/aep-format.md 3.7):
- ADBE HDR ToneMap -> ec.utility.hdrcompression (Amount)
- ADBE Echo -> ec.time.echo (Echo Time, Number Of Echoes, Starting
Intensity, Decay, Echo Operator by item name)
- ADBE Linear Wipe -> ec.transition.linearwipe
- ADBE Offset -> ec.distort.offset (Blend With Original is a stored 0..1
fraction, a percentage here)
- ADBE Deflicker -> ec.color.colorstabilizer (fresh Stabilize default
Levels, points, Sample Size)
A table row can name the range EffectCraft's effect works in
(ParamMap::limit): Echo values or keys beyond 255 echoes or a Decay of 1
are imported as stored and reported.
Tests build each effect into the committed synthetic.aep (fx_inject.rs,
which also checks its pard layout reads back). On the sample project the
effect losses go from 75 to 3 (the out-of-range Echo values).
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* AEP import: doc comments on the quick-win test helpers and tests
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* AEP import: Echo keyframe regression for the range loss
Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* #3113: use After Effects' effect match names in scripting
Checked every row of crates/script/src/matchnames.rs against After Effects
26.2 (app.effects, canAddProperty and the layer property trees). Fourteen
effect names were wrong: twelve did not exist (Pixel Motion Blur is
ADBE OFMotionBlur, Shadow/Highlight is ADBE ShadowHighlight, Ellipse is
ADBE ELLIPSE, ...), and Noise and Photo Filter pointed at After Effects'
hidden obsolete versions (now ADBE Noise2 and ADBE PhotoFilterPS). A
light's Casts Shadows is ADBE Casts Shadows.
The old names stay accepted for lookup (addProperty, property(), and
parameters such as "ADBE Noise-0001"), so existing scripts keep working;
.matchName emits only the After Effects name. A names-only fixture of
After Effects' first-party match names backs the new test.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Scripting: match names that changed only in case still find effects and parameters
property("ADBE Ellipse") and "ADBE Grow Bounds-0001" found nothing after the names became
ADBE ELLIPSE / ADBE GROW BOUNDS.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* Disk cache: stamp footage files for the salt off the UI thread
Importing an After Effects project whose footage includes long image
sequences on a network share froze the desktop app for 15-27 s. The
import itself takes about 0.25 s; the time went into the edit's bump(),
where refresh_disk_salt() stats every footage file (13,466 sequence
frames in the measured project, ~15 s) on the UI thread whenever a disk
cache is attached. File > Open and footage reload hit the same path.
With Session::disk_salt_background (set by the desktop app) the salt is
taken on a worker thread and picked up by poll_disk_salt() from the UI
tick. Until it lands the layer cache runs memory-only, so keys under the
old salt (other files, or another project's items) are never read. A
newer footage change supersedes a salt still being taken. Headless
sessions keep taking it synchronously.
A settings change that keeps the disk cache folder no longer re-stamps
every footage file either.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Disk cache: opening a project drops the footage salt being taken
A salt job still running for the old project was kept when the new project named the
same footage, so the salt stamped before the files changed stayed in use.
Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* Home screen: leave it when a menu command opens a composition
File > Import > After Effects Project... from the Home screen imported the
project (the toast said so), but the Home screen stayed on top, so it
looked as if the import had done nothing. Only the Home screen's own
buttons left it.
run_engine now leaves the Home screen when a command succeeds and changes
the active composition to one that is open, the rule scheduled script
tasks already follow. Frontend events run afterwards, so Help > In-App
Tutorials and New Project from Template still show it. A command that
opens no composition (or fails) keeps it.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Home screen: also leave it for a project that replaces one with the same composition id, a picked file and the New Composition dialog
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>