A solve with unsolved frames drew the same block as a full one, so it
looked complete. It now gets one more line in the warning colour,
"Partial solve: N of M frames solved", under the status line, and the
editor grows by that line only then. The line is an automation element,
so agents can read it too.
The text listing printed enum values as bare numbers, which are 0-based
where After Effects scripting counts from 1, so Range Selector Shape 2
read as Ramp Up was Ramp Down. Print the label from the property's
options, as props --json already lists them: "0 (Square)".
The bitstream check read ffprobe's first-frame tags from the MP4, which
ffmpeg can fill from the colr box when a stream says nothing itself. Copy
the video out as a bare h264, hevc or obu stream first, so only the SPS VUI
or AV1 color_config counts.
A 3D model layer keeps its file's materials, so it has no Base Color,
Metallic, Roughness or Emissive. material.set refused them with "no
Material Options property matched (..., baseColor, metallic, roughness,
...)", naming the parameters it had just refused, and next to a
parameter the layer has it dropped them and reported success.
A parameter that none of the given layers has now fails the command
(nothing is set), naming it and the properties the first layer has. A
value of the wrong type is its own error. The parameter list says which
layer kinds take which.
Every MP4 export said BT.709 whatever the Output color space, in the
colr box and in the bitstream, so Rec. 2020, P3, PQ and HLG renders
were labelled as BT.709.
Move the ProRes colr mapping to output_codes and use it for every movie
path: the nclx colr box, FilmCraft's H.264 ColorConfig (VUI), and new
colour fields in effectcraft-hevcenc (VUI) and effectcraft-av1enc
(color_config), which wrote 1-1-1 as constants. The matrix stays BT.709,
the coefficients every path converts with. Default renders don't change.
* Follow-up to #2823: box each of several objects around its whole matte on correction frames
With several objects, a correction frame's box came from the model's cut
of that object's strokes on the frame alone. A stroke on part of the
object boxed only that part, and SAM 2 followed only that part from
there on. Each object's matte is now carried to the frame with its own
strokes, from its first prompted frame or its nearest tracked frame, by
the walk Chain::ensure uses (now Chain::carry). These mattes are not
cached, since object keys hold tracked results.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Follow-up to #2823: carry corrections before the base from the base outwards
Prompt frames were visited in ascending order, but before the base the
carry walks towards it, so each correction there re-walked from the
root. Visit each side from the base outwards and sort the prompts back
into frame order for the tracker.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Follow-up to #2823: find an object's carry root in one pass over its strokes
The root search scanned every frame's strokes from the prompt frame to
the base, for every prompt. Take the object's foreground stroke on the
way that is nearest the base in one pass instead; the root is the same.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* M13.35: reproduce an earlier object correction losing tracked matte
* M13.35: carry earlier object corrections from valid tracked mattes
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
Co-authored-by: FredApps <FredApps@users.noreply.github.com>
* Fix#2823: Propagate boxes SAM 2 around the matte shown on the stroked frame
The tracker's box prompt came from the classic graph cut of the strokes,
which can leak into the background; SAM 2 then filled the whole box.
Build the box from the model's own matte (segment_with), the one shown
before Propagate. segment_with falls back to the classic cut when the
model can't segment, so non-model paths are unchanged.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Fix#2823: box a lone object around the matte shown on correction frames too
A correction frame shows a matte propagated from the frame before, not a
fresh model cut, so the tracker's box came from a different matte than
the one on screen. With one object the box now comes from Chain::ensure,
the matte shown on that frame. Several objects share one shown matte, so
each keeps the model's cut of its own strokes. Cancelling while the shown
matte is computed stops instead of falling back, and the prompt frame is
read only when needed.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
camera.solveStatus said `solved: true` for any stored solve, but the solver
keeps the frames it cannot resect as unsolved and interpolates the camera
there. `solved` now needs every frame, the same check camera.exportBlender
makes, and `partial` marks a solve with gaps, next to `solvedFrames`.
Under load its thread pulled samples before the test read the clock, so
'from the first frame' saw frame 1 and a_started_preview_follows_its_sound flaked.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
The PR pinned the head of a fork branch, not in craft-libs history; the crate
source is byte-identical at both revs.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
ProRes renders had no colr atom, so the stream reported no primaries,
transfer or matrix. Write an nclc atom, as FilmCraft does for MOV, with
the codes of what the render path makes: the project's output space when
it has a working space, BT.709 otherwise.
sRGB output stays at transfer 1, which is still open on #340 and #464.
The frames don't change, so the pinned ProRes bytes move by exactly the
atom's 18 bytes.
The craft-ecproj-format pin moves to storytold/craft-libs#409's new
head, where Head::read is the one reader and saved_by() is removed.
effectcraft-project's saved_by reads savedBy with Head::read, and from
ReadError::TooNew for a project with a newer schema.
saved_by now returns None for text that is not a JSON object with a u32
schema. EffectCraft calls it only on files Project::from_json opened,
so opening and importing projects are unchanged.
effectcraft-project writes and checks the envelope of .ecproj files with
craft-ecproj-format from craft-libs: File (savedBy, then the saved view
and the project) with to_json and to_json_compact for Save Compact
Project Files, check_schema and its message, SCHEMA_VERSION and
saved_by, which stay re-exported under their names. Project, SavedView
and the schema 1 conversion stay here.
Saved files are byte-identical. saved_by now reads only a JSON object,
so a project written as a JSON array no longer reports a savedBy.
Brandon Thomas
Dylan M. Taylor
JonRC
Brandon ThomasandClaude Opus 5.5
FredApps
dotCooCoo
Jonas Neubauer
jayzed80
tylerjenningswandChewybone-sudo