* Pin that a comment id past u32 is refused, not truncated (#3677)
`validate_comment_id` refuses an `id` that does not fit a `u32`, so the `as
u32` casts behind it can no longer reach another comment -- but nothing pinned
it, and the casts are still there to be reached if the guard moves.
The ids the test sends are the ones that would alias onto real comments if the
truncation came back: 2^32 truncates to 0 (and the first comment is 0), 2^32 +
id to that comment, 4294967301 to 5 as the report describes, and u64::MAX to
u32::MAX. Each of the four commands that take an id is tried with each, then
the comments are checked to be unchanged and unresolved, and a valid id is
accepted afterwards so the guard is shown to be a range check rather than a
refusal.
* Comment ids: the values past u32 go in the existing invalid-id test, refused by the range check
update_generated now keeps what comes before a wrapped list's field, which can be
another list field; rebuild from the converted field's code instead of the
paragraph's first list field, and let index::rebuild_from take that code.
- update_generated keeps what precedes a wrapped list's field (r4468529243)
- from_doc keeps objects in hidden text when hidden text is written (r4469018820)
- clipped cell lines in a turned frame are drawn once, clipped, turned (r4469018900)
- kept::while_writing works out reply map and page fingerprint once per export (r4468529227)
- odt_charts fixture declares its namespaces (r4468529259)
- guard test for character styles based on a missing parent (r4469018843, not a bug)
- odf.preset: word (Microsoft Word style, default) or libreoffice; wordcraft still read as word
- Options, CLI (WORDCRAFT_ODF), docs and ROADMAP follow the two styles
- CodeRabbit: kept groups and story fingerprints follow fill_objects; padding serde default;
list field depth; literal doubled quote; ASK/SET results not exported; dc:date offsets;
first_pages order; unique picture names; finite raise clamp; PDF rotated-text guard;
.ott in the password message; flat element bounded by depth; cell tile fallback;
ROADMAP and docs reconciled
- Remove clean-room wording from the ODT tests
* Gap 4: flag document fonts that aren't installed
The font box (ribbon, mini toolbar, both Font dialog boxes) shows a
warning mark when the current font isn't installed; its hover note
names the font drawn instead. The status bar says "N fonts not
installed" and lists each with the faces drawn instead, plus Add Font….
Agents get `font.missing` and `format.state.fontShownAs`.
Layout records, where it picks a face per text segment, the fonts the
shown text asks for that aren't installed and the faces drawn instead
(ParaLayout::substituted, DocLayout::substituted_fonts), so hidden
text, unused styles and orphaned stories never count; list labels,
field results and East Asian and complex-script text do, and so does a
missing roman font drawn in Cambria. Metric-compatible substitutes and
symbol fonts drawn as Unicode aren't flagged. Bounded for hostile
files: 64 pairs a paragraph, 1024 a document, names kept to 256
characters, 20 rows in the popup.
Ported from alehel/wordcraft#1 onto current main; English strings only
(translations belong in storytold/craft-i18n).
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Gap 4: missing-font review fixes
- Judge a padded font name by the face layout drew for it, and skip blank names.
- Name the face CJK text is drawn in for a missing East Asian font, not Cambria.
- Keep the missing-fonts list per window, so several windows don't rebuild it every frame.
- Expose the font box's warning to screen readers as its description.
- Count missing fonts with craft-i18n plurals (`i18n::tn`).
- One table of metric twins (`fonts::word::METRIC_TWINS`): a missing font is drawn in an
installed twin first, and the warning reads the same table.
- Find the status-bar item by part of its label in the click test.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Gap 4: warn for a font picked at the caret; drop fonts of hidden list items
- At a collapsed caret the font box warns for a missing font typing will use, also at the end
of text in another font (it waited for the first letter).
- A list item that shows nothing (#3982) reports no missing font: its number was shaped, and
its font recorded, before layout dropped it.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Gap 4: say where Add Font… is, and that it needs the font file
The font box's note said "Add Font… installs it": Add Font… opens a file picker at the end of
the list, so it only helps with a font file at hand.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Gap 4: docs say the popup lists 20, and when the font box warns ahead
CodeRabbit review: the status-bar popup lists the first 20 missing fonts, then a count; the font
box also warns at a collapsed caret for a font no shown text uses yet; `fontShownAs` is the
font's substitute, fallback faces aside.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Gap 4: the Font dialog warns for a missing font over a selection
CodeRabbit review: the dialog's boxes show the fonts OK applies, which no shown text may use
yet (an Asian text font over Latin text, a font typed into the dialog), so they name the
substitute whatever is selected. The ribbon's box over a selection still reads the list.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Gap 4: the Asian font box names the face CJK text gets
CodeRabbit review: the status bar's list is by font name, so for a font Latin text also uses
it named the Latin text's substitute. The Asian text box now always looks up the face layout
draws Chinese, Japanese and Korean text in.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Gap 4: gaps.md status on the current line, missing-font scope and twin wording
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Gap 4: gaps.md says which missing fonts are flagged and what font.missing lists
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Gap 4: font.missing lists what the current view lays out
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
Conflicts kept both sides. Where the two branches met:
- Para.mark: both added it. It stays CharProps (ODT needs it); HTML's
`<p> </p>` converts its Fmt, and to_doc reads it in one place.
- Arrowheads: the PR's line ends (top left to bottom right) with main's
arrowhead styles.
- inline_rect: the PR's depth below the baseline with main's rule room.
- Spacing and Cell literals take main's new fields.
- The zip entry guard (#3660) also covers the encrypted ODT paths, which
parsed a package before it; regression test in tests_more/encryption.rs.
- chunks_exact to as_chunks in odt/frames.rs and odt/path.rs (clippy).
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Opening draws charts from their data, which changed their paragraphs'
fingerprints, so their markup never matched. Drawing goes through
Document::fill_objects, which moves the kept markup with them.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01GBVQLyDnrG8Tn1yDQcUabC
row_names uses the shared display_name helper, so a built "Language (Region)" name is translated in
parts. The dictionaries-folder comments in prefs.rs and tests.rs say File > Options > Language.
Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01FypgCYmv6UJmY2QcuhfXco
The Dictionaries folder moves here from Proofing with the Dictionary files list (#1063) kept. Set as
default sets only the saved default proofing language (the new pure review.language.preferred command), and
proof.packs returns the languages rows.
Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01FypgCYmv6UJmY2QcuhfXco
With no list of packs yet the bar offers a language with no dictionary and Install fetches the
list, then the pack. The caret's typing language counts, the spelling context menu heading is in
the interface language, and closing the bar is remembered per document, pack locale and tag.
Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01FypgCYmv6UJmY2QcuhfXco
Every published pack is named in English, Valencian is ca-ES-valencia, and rows are matched by
tag (language, script, region, variant), never by the name shown. One region helper
(packs::is_region, packs::without_region) next to pack_for_tag serves the engine and the UI.
Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01FypgCYmv6UJmY2QcuhfXco
Widow and orphan control a file doesn't state is open in the standard
(it refers to XSL, whose initial value is 2); LibreOffice reads it as
off. It is now a profile case (widowControl), and WordCraft writes it on
its default style either way.
LibreOffice measures tab stops from the paragraph's indent when its
TabsRelativeToIndent setting is on (its default), default stops too
(measured). WordCraft's layout now counts default stops from the indent
for such documents, and writes them back measuring from the indent
instead of from the margin, which moved LibreOffice's default stops.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01GBVQLyDnrG8Tn1yDQcUabC
Word's TOC over entries in columns keeps its TOC Heading title in a one-column
section above a blank paragraph that ends it; Update Table moves the field into
that blank paragraph. Replace (references.toc with settings) put the new title
under the break, inside the two-column section, and Remove kept the blank
paragraph and its break.
Observed black-box in Word for Mac 16.114.3 on a synthetic document: Insert
Table of Contents keeps the title, the blank paragraph and the break and only
changes the field; Remove Table of Contents takes the title, the blank
paragraph and its break with the entries.
Replace now keeps the title above the break (renamed when a title is given)
and rebuilds the field and entries in place; Remove takes the title and the
blank section-ending paragraph with the table. A paragraph of another style
above the break stays.
Co-authored-by: Harrison Smith <harrison@hsmith.dev>
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
Co-authored-by: Brandon Thomas <echelon@gmail.com>
* #5290: Page Up/Down move by a page in Outline, Draft and Web Layout
These views lay the document out as one long page, so caret.pageUp/pageDown looked for a previous or next page, found none and left the caret where it was. Move by the text area height of the caret's section instead, the same distance Print Layout moves.
* #5290: Page Up/Down pick the line past the caret, and page from a hidden outline selection end
Choose the destination among the lines past the caret by height first (DocLayout::line_toward), so narrow right-indented paragraphs can't keep the caret on its own line when the step is short. The above/below test is shared with vertical().
In Outline view, a selection that ends in text a collapsed heading hides pages from where the outline shows it (outline::shown_pos, pulled out of after_command), keeping the anchor. Avoid f32::clamp, which panics on a NaN page height.
Building the queue checked every character of the document against every
citation field, so a document with many citations made Read Aloud do
characters x citations comparisons before playback started.
The citation spans are now sorted and merged once, and each position is
looked up by binary search.
- PACK_INDEX: language-packs-2 index.json, sha256 b35c7aef…, built from craft-i18n 20467b63
- craft-proof pinned at storytold/craft-libs 47c9f625 (flag-based compounding, #497; review follow-ups and en-AU, #496)
- Options › Language: ProofLang::EnAu has no Hunspell dictionary name of its own (English uses SCOWL)
- docs: Danish, German, Dutch, Swedish, Norwegian, Hungarian, Estonian, Croatian, Persian and Esperanto are packs; Mongolian and Thai stay hidden
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Found by comparing WordCraft's own documents in LibreOffice and
bisecting settings.xml (observed only, black-box):
- The settings set's name, ooo:configuration-settings, is a qualified
name: without xmlns:ooo declared LibreOffice ignored every setting
WordCraft wrote (its Word layout rules, tab measuring).
- A set LibreOffice reads must be complete: a setting missing from it
gets its old pre-OpenOffice value, which changes the layout. WordCraft
now writes LibreOffice's current layout defaults (as a new LibreOffice
document has them), overlaid with Word's layout rules for documents
WordCraft lays out as Word does (not for ones opened from ODF), and
its own choices.
- How the space between paragraphs adds up follows a file's
AddParaTableSpacing (false: the larger, as Word); unstated, the ODF
profile's new sumParagraphSpacing (WordCraft: the larger, LibreOffice:
the sum). WordCraft writes it as it lays the document out.
WordCraft-origin documents in LibreOffice: 142k -> 80k differing pixels
over 42 documents; the LibreOffice corpus: no regressions, 40k -> 39.6k.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01GBVQLyDnrG8Tn1yDQcUabC
Found by saving WordCraft's own documents as ODT and opening them in
LibreOffice (42 documents: templates, themes, one per feature).
- Table styles: ODF has no table styles of Word's kind, so each cell now
states what the style gives it (fills, its borders, bold header text,
its paragraph spacing), under the paragraph's own styles as layout
applies them (ECMA-376 §17.7.2; StyleSheet::table_para_patch and
table_char_patch). The style's border mapping moved to
styles::part_borders, shared with layout.
- Tables read from ODT no longer get Word's Table Grid style, whose
single spacing changed their text.
- Columned sections say whether their columns end balanced
(text:dont-balance-text-columns, §20.428, read as its name says; its
value descriptions contradict it). Unstated, the ODF profile decides
(balanceSectionColumns: LibreOffice balances, WordCraft as Word).
SectionProps::balance_columns carries it to layout.
- SmartArt diagrams are saved as a draw:g of their shapes and text (with
an invisible frame keeping the graphic's box), which LibreOffice draws
as WordCraft does.
LibreOffice round-trip corpus: 40k differing pixels over 125 documents
(was 76k), 42 identical; WordCraft-origin documents 277k -> 145k.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01GBVQLyDnrG8Tn1yDQcUabC
ODF 1.3 §20.206–20.209 define page margins by referring to XSL's
(§7.10), without saying whether XSL's initial value 0 comes with the
reference; LibreOffice uses 2 cm. The margin a page layout leaves out
is now the profile's `pageMargin`: WordCraft 0 (XSL's), LibreOffice
2 cm, or custom (File › Options › Advanced › OpenDocument files,
`file.options` `odf.pageMargin`). A stated margin is the file's under
every preset. With the LibreOffice preset, LibreOffice's CV, sans-serif
business letter and one-page résumé templates match LibreOffice again.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01GBVQLyDnrG8Tn1yDQcUabC
What ODF 1.3 defines, including XSL's initial values for fo: properties,
is followed whatever the settings: unstated page margins are now 0, and
padding without a border takes room in every ODT document. What the
standard leaves to the application (Part 3 §16.2) is an OdfProfile:
WordCraft's own choices by default, LibreOffice's, or custom values.
The profile fills in only what a file leaves unsaid; stated values win
under every preset (tests_more/profile.rs).
Cases: header height, how its height and spacing combine, dynamic
spacing, tabs from the indent, column gap, shape fill, line and
hairline, page frames against a paragraph, in-line frames against a
paragraph or page, and lines of only pictures.
- doc: odf_profile module; Settings::odf (OdfLayout) replaces odf_layout
- formats: import_with / import_flat_with take a profile
- engine: Prefs::odf, file.options `odf`, opened files follow it
- ui: File > Options > Advanced > OpenDocument files (presets, custom cases)
- cli: WORDCRAFT_ODF=wordcraft|libreoffice
- docs: odf-interpretation.md lists every case (law, open, writer
choices, Google Docs and ONLYOFFICE findings); parity docs, gaps,
ROADMAP updated
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01GBVQLyDnrG8Tn1yDQcUabC
Form controls:
- Placement: a control hanging from the baseline (as LibreOffice places
those it makes) was saved with no placement. LibreOffice then puts it
at the line's top, so every control row shrank. Its raise is now kept
(`ContentControl::form_raise`, read as in-line frames are) and
written, standing on the baseline when it had none.
- Multi-line fields: these were saved without LibreOffice's `MultiLine`
property, so they showed one centred line. They now carry it.
- Text fields get LibreOffice's flat border.
- Also: `pt()` no longer writes "-0pt".
Custom shapes:
- A shape drawn from its own geometry was saved as WordCraft's path of
it, and a preset WordCraft draws as a rectangle (a cloud) was saved as
a rectangle. The geometry as read (type, path, equations, handles) is
now kept (`ShapeExtra::odf_geometry`) and written back, mirrored as
the shape now is.
- `shape.change` and the ink-to-shape conversion drop the kept geometry,
since the shape is then another kind. `ShapeExtra` holds it as an
`Arc<String>` to keep `Placed::Shape` small.
- The reader's `end` hands skipped elements to `end_skipped`.
Results:
- The forms document round-trips pixel-identical (2,949 pixels before),
with its text the same.
- The shape presets fall from 2,467 to 1,220. The rest is LibreOffice's
hairline outline, which WordCraft keeps as 0.5 pt.
- Across the corpus the round-trip difference falls from 45k to 41k
pixels. 42 of 125 documents round-trip pixel-identical, 92 with their
text the same, and none gets worse.
gaps.md row 19 and the ROADMAP log are updated.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01GBVQLyDnrG8Tn1yDQcUabC
Charts: on save, WordCraft wrote each chart anew from its chart model
(type, data, title, legend, labels), losing the look it doesn't model:
fonts and sizes, axis and grid lines.
- The chart object as read is now kept with the chart (`Chart::source`
in the flow model, `Graphic::source` in the document).
- `chart::redraw` keeps it when the chart is drawn again on open or
resize.
- The ODT writer writes it back whole while it still reads as the same
chart. An edited chart is written from the model, as before; DOCX
still writes charts from their model.
- The chart documents now round-trip pixel-identical (chartcol: 5,917
pixels to 0).
LibreOffice's serif business letter (4,223 pixels to 116):
- A text frame outlined by a drawn stroke (`draw:stroke`, a 0 width a
hairline) and no `fo:border` lost its outline. It is now the frame's
line; an explicit "none" border still wins.
- A header or footer whose style states no height, or that has no style,
was 0 tall. LibreOffice makes it 0.5 cm (measured by varying the
height), so the text had moved up 1.5 pt.
Across the corpus the round-trip difference falls from 60k to 47k
pixels, and 41 of 125 documents round-trip pixel-identical. No document
gets worse.
gaps.md row 19 and the ROADMAP log are updated.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01GBVQLyDnrG8Tn1yDQcUabC
Word's Font › Emphasis mark (a mark over or under each character, used
to stress East Asian text) wasn't modelled. DOCX `w:em` and ODT
`style:text-emphasize` were dropped.
- Model: `CharProps::emphasis` (dot, comma, circle, dot below, or none
to turn off a style's).
- Layout: a mark is drawn over (or under) each character, and the line
is made taller to fit it.
- `format.emphasisMark {"mark": …}` sets it, and Format state reports
it. The catalog lists it under Home › Font.
- DOCX: `w:em` is read, and written in its place in `w:rPr` (after
`w:cs`, before `w:lang`).
- ODT: `style:text-emphasize` maps to it: an accent is the comma, a
disc the dot, a dot below the under-dot.
Also fixes two problems from the previous commit (ODT variables):
- Field updates blanked a SET field's stored result. The layout
already draws nothing for SET, so its result stays as it was, as
`ask_and_set_fields_draw_nothing` pins.
- A clippy lint (manual char comparison) failed.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01GBVQLyDnrG8Tn1yDQcUabC
Joseph AngladaandClaude Sonnet 5.5
Hamza Naveed
Dmitrii KhlapovandClaude Sonnet 5.5
Aleksander HelgakerandClaude Opus 5.5
mmazzieriandClaude Opus 5.5
FredApps
pakiatandClaude Opus 5.5
LQRDandClaude Opus 5.5
Bryan MarkandClaude Opus 5.5
VoiceLessQ
.CooCoo
Aleksander HelgakerandClaude Opus 5.5
Martin BallandClaude Sonnet 5.5
ljkx
Dylan M. Taylor