A table with repeated header rows that started near the bottom of a page left the header rows
there alone when the first row after them didn't fit, then repeated them on the next page above
that row. Word starts such a table on the next page.
place_table now checks, before the first row, whether the row after the header rows can start
under them (whole, or split when it may split). If it can't and the page already holds
something, the table starts on the next page. A table at the top of a page keeps its header
there as before.
Co-authored-by: dfgodvan <180286157+dfgodvan@users.noreply.github.com>
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
Word's cover pages are one paragraph holding a page break and then the
page-anchored text box with the title and the approval table. Word
draws a floating object on the page its anchor paragraph starts on;
WordCraft drew it with the line holding the anchor, which after the
break is the first line of page two, so the cover was blank and the
title box sat over the body text of page two.
`place_objects` now places a paragraph's floating objects from its first
piece, whichever of its lines holds the anchor, and none from later
pieces; inline objects still go with their own line. The wrap areas were
already registered from the paragraph's first page, so nothing changes
for text flowing around the object.
Co-authored-by: Daniele Mori <Dinasty@hotmail.it>
Co-authored-by: Claude Fable 5.1 <noreply@anthropic.com>
space after and the second's space before, as Word does by default. Word
adds them instead when the document's compatibility options include
w:doNotUseHTMLParagraphAutoSpacing. Measured in Word with five paragraphs
of 12 pt before and after: 24 pt between them with the option, 12 pt
without, the same in compatibility modes 14 and 15. A 60-page report with
the option lost 6 pt per paragraph, about 60 pt on its cover.
The option is read, laid out in the body and in boxes, and saved back.
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
Co-authored-by: Brandon Thomas <echelon@gmail.com>
A header or footer a section inherits (Same as Previous) keeps the
percentage widths of its tables relative to the section that defines it.
Measured in Word: a 100%-wide footer table defined by a portrait section
stays 451 pt wide, centred, on landscape pages that inherit it, and spans
the landscape width only when that section names the footer itself.
Paragraph alignment in the same footer follows the landscape page.
Found on a report whose landscape calculation pages drew their footer
table full width where Word draws it at the portrait width.
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
Co-authored-by: Brandon Thomas <echelon@gmail.com>
* Layout: an empty section mark stays on a full page
An empty paragraph that carries a section break, when the next section
starts on a new page, needs no room of its own in Word. Measured: 50 lines
filling a page, then that paragraph, then the next section makes two pages
in Word; WordCraft made three, the middle one blank. A plain empty
paragraph in the same place still moves on, in both.
Found after a landscape drawing page in a 60-page report.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Layout: drop an unneeded mut in the section mark test
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
Co-authored-by: Brandon Thomas <echelon@gmail.com>
* Tables: a row with less room than its minimum height moves on whole
Measured in Word with about 49 pt left on a page: a table row of eight
lines splits there, but the same row with an at-least height of 63.6 pt
goes to the next page whole, and so does one holding a nested table.
Without the height both split, as before. WordCraft split them all, so a
report's title row (a logo beside a small nested table) started at the
foot of its cover page.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Tables: preserve splitting for oversized minimum-height rows
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
Co-authored-by: Brandon Thomas <echelon@gmail.com>
* Tables: text running past an exact-height row is cut off
A row with an exact height (w:trHeight w:hRule="exact") keeps that
height whatever its cells hold. Word cuts the text that doesn't fit at
the cell's edge; WordCraft drew it over the rows below, so a certificate's
identification block came out as overlapping lines.
The cell is marked as clipped in layout (Placed::Cell clip), and display
draws its lines inside that cell's clip, on screen and in PDF. Hit
testing is unchanged: the lines stay where they are in the layout.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Tables: keep row clipping compatible with Rust 1.90
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
Co-authored-by: Brandon Thomas <echelon@gmail.com>
Word writes the next heading's TOC bookmark start into the paragraph that
ends with a page break. The line after the break then held that marker,
so it wasn't the empty mark kept with the break (#932): it went onto the
next page with the paragraph's spacing and pushed the heading 17 pt down.
Lines holding only zero-width markers (InlineObject::is_marker) now count
as empty there.
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
Co-authored-by: Brandon Thomas <echelon@gmail.com>
A paragraph holding only a page break keeps its mark on the page before
(#932), but its space after still went onto the new page, so a heading
with page break before no longer stood at the top and broke again: a
blank page. The space after now stays with the mark. A next-page section
break carried by such a paragraph also started a second page; the empty
page the break started is now used instead.
Found on a 60-page inspection report: two blank pages Word doesn't have.
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
Co-authored-by: Brandon Thomas <echelon@gmail.com>
w:pgNumType w:start="0" was read but laid out as 1: the page counter
was set to one less than the restart and could not go below zero. A
report numbering its cover 0 read "Page 2" on the page Word calls 1.
The restart is now the next page's number itself.
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
Co-authored-by: Brandon Thomas <echelon@gmail.com>
With room for two of its three lines at the bottom of a page, a paragraph was
split two and one, leaving a widow; taking a line along would leave an orphan,
so Word moves the paragraph whole. A paragraph continued from the page before
may still take one line along from two (no orphan there).
Co-authored-by: przemek-arch <263159043+przemek-arch@users.noreply.github.com>
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
Co-authored-by: Brandon Thomas <echelon@gmail.com>
* Layout: inside/outside floats swap sides on even pages; Page Setup shows mirror margins (#1181)
Floats aligned inside or outside, or placed relative to the inside or
outside margin, were always put as on an odd page, so shapes Word puts
in a book's outside margin all came out on the right. They now follow
the page they're on (ECMA-376 ST_AlignH, ST_RelFromH): on an even page
the inside is the right side. Floating tables (w:tblpXSpec) too.
With mirrored margins, even pages are laid out as odd ones and then
shifted; float positions now allow for that shift, so floats placed
from the page edge stay put (the "known limit" in #452) and the left
and right margin areas are each page's own.
Mirrored margins read from a file were invisible in the UI: the Margins
menu ticks Mirrored when they're on, and Page Setup gets a Mirror
margins check box (labelling the margins Inside and Outside), applied
through a new `mirror` param of layout.margins.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* i18n: Mirror margins in every catalog
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: lloyd <lloyd@stackworx.io>
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
Co-authored-by: Brandon Thomas <echelon@gmail.com>
* Harden against hostile-document DoS and non-web link export
A security pass found several small files that make the app allocate or
compute without bound when opened (GUI, wordcraft-cli, or the MCP server),
and link targets leaving on export without the scheme check the HTML and
Markdown writers already apply. None lets a document run code or read files;
all are denial-of-service or credential-leak-on-click. Each fix bounds an
attacker-controlled size and lands with a regression test, per the
never-crash standard.
- layout: a table repeats its header rows on every page it spills onto, so
many tall header rows paginate to O(headers x pages) placed items. Cap the
total header-row repeats per table (lib.rs). 2 KB docx: 1.1 GB -> 124 MB.
- formats/model, html: an HTML table of many <tr> with large rowspan expanded
to rows x 64 covered cells, and `model::table` pre-allocated a full
rows x cols grid only to clear it. Cap rows at MAX_ROWS before
insert_covered, bound its total work, and build the grid template with one
row. 640 KB html: >1.5 GB -> 214 MB (a plain large table is faster too).
- docx/read/freeform: a custom-geometry Bezier segment took any number of
points, making de Casteljau flattening quadratic. Cap points per segment.
3 KB docx: 12 s -> 0.15 s.
- docbin: footnote/header/text-box story tables and the piece table can name
the same backing text many times. Hold the total characters materialised to
twice the WordDocument stream size (a ceiling no real file reaches, since
each char costs >=1 stream byte). 45 KB doc: >1.2 GB -> 14 MB.
- render, pdf, formats/rtf: document pictures were decoded with no dimension
limit, so a tiny file declaring a huge image could allocate before the size
check. Decode through image::Limits with a side cap first.
- doc/link, formats/rtf, odt, latex: route exported hyperlink targets through
is_safe_href (as HTML/Markdown already do), and extend it to reject
protocol-relative (//host) and UNC (\host) references. Keeps file:,
javascript:, ms-msdt: and UNC targets from being written into exported RTF,
ODT, LaTeX and PDF where a reader would follow them (UNC leaks NTLM on
Windows).
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
* Align picture-decode limits with the bounds already in force
Review of the previous commit: `image::load_from_memory` and
`load_from_memory_with_format` already applied `Limits::default()`, whose
512 MB allocation cap bounded every picture decode. The PDF change had set
`max_alloc = None`, loosening that; restore the default. The render and RTF
side caps (16 384 px) newly rejected wide-but-short pictures that fit in
memory, so render now uses the pixmap's own `u16` side limit (what
`premul_pixmap` enforced after decoding, applied before it instead) and the
RTF re-encode keeps only the explicit allocation cap. Net effect: rejection
moves to header time with no change to the sizes accepted. Also fix a
comment: the header-row repeat cap is per table, not per document.
Co-Authored-By: Claude Fable 5.1 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 4.8 <noreply@anthropic.com>
* #775: STYLEREF fields in headers and footers show each page's result
Running headers/footers with STYLEREF (e.g. the current chapter title) are
evaluated per page at layout time (ECMA-376 §17.16.5.59): the page's first
paragraph of the style (\l: last), else the nearest before, else after.
Style names/ids, heading levels (STYLEREF 1), character styles, and the
\n \r \w \s \t \p switches. Body STYLEREF fields update with the other
fields. STYLEREF added to Insert › Quick Parts › Field with its options.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* #775: STYLEREF error text in our own words
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Review fixes for #882: translate the STYLEREF Field dialog strings
Adds the style picker label, the six STYLEREF switch labels and the
STYLEREF description to all 18 interface catalogs.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* STYLEREF: reuse the style index while the body and styles are unchanged
Headers with STYLEREF rebuilt and hashed the body's style index on every
layout pass (echelon's follow-up note on #882). The layout cache now keeps
the index with the body blocks it came from (shared, so an edited block is
a different pointer) and the styles/numbering hash, and rebuilds it only
when either changed.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* vi: STYLEREF field strings
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Dmitrii Khlapov <19991457+dkhlapov@users.noreply.github.com>
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
Co-authored-by: Brandon Thomas <echelon@gmail.com>
- Table autofit measured every cell paragraph at an unbounded width through
the paragraph cache, so a long table held two layouts per cell. The cache
now keeps only the measured narrowest/widest widths (`LayoutCache::measures`,
same key and eviction as the layouts).
- The cache key formatted each cell's table-style text formatting with Debug
for every cell paragraph on every pass; the hash is now memoised per pass.
- Update Fields added the hidden ListEntry style even without a generated
list, which changed the layout environment and dropped the whole cache.
The style is now added only when a list is rebuilt.
Co-authored-by: dfgodvan <180286157+dfgodvan@users.noreply.github.com>
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* Fields: PAGEREF in headers and footers shows its bookmark's page
Headers and footers are laid out once the body is paginated, so a page
reference there now shows the number of the page its bookmark starts on, in
that page's number format, instead of the result stored in the file. Like the
page totals in headers and footers, it is filled in after pagination and
doesn't make the body lay out again. Mail-merged letters use this for
"Page X of Y" per letter (Y = PAGEREF to a bookmark at the letter's end). Page
references in the body keep their result until fields are updated.
* Contributors: add cyril265
---------
Co-authored-by: Brandon Thomas <echelon@gmail.com>
- Every cell in a row gets the row's largest top and bottom cell margin, so
a cell without its own margins lines up with its neighbours.
- An exact row height covers the top border, top margin and text; the
bottom margin comes on top. Dragging a row border, or drawing a line
through an exact row, accounts for it.
- A row split across pages must keep its cells' bottom margin, border and
last paragraph's space after on the first page, and widow/orphan control
applies to the paragraphs in its cells. A row whose text fits but whose
margin doesn't no longer moves to the next page whole.
- Each cell of a split row goes on at the top of the continuation (one
cell's widow line no longer pushes its neighbours down), and the
continuation is as tall as the cell needing the most room, and at least
the rest of the row (a minimum row height holds over the pages).
- A nested table's cell the page bottom cuts through goes on from the cut
with what is left of it, and the text after it stays below it.
- A row of an exact height never splits: it moves to the next page whole.
Co-authored-by: Naxvog <4963183+naxvog@users.noreply.github.com>
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
Co-authored-by: Brandon Thomas <echelon@gmail.com>
A paragraph whose last line holds the page break keeps its mark on the old
page, but its space after was still added after the break, so the next page
started that much too low (and the next paragraph lost its "no space before
after a page-break mark" treatment). Word adds none of it there, in
compatibility modes 12, 14 and 15 alike.
Co-authored-by: Naxvog <4963183+naxvog@users.noreply.github.com>
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
Co-authored-by: Brandon Thomas <echelon@gmail.com>
* #960: double-click the margin to create and edit a header or footer
Double-clicking the top or bottom margin in Print Layout now edits the
header/footer that page shows, creating it (first page, even page or
default slot) when the page has none. insert.editHeader/editFooter take
{"page"}; insert.closeHeader takes away a created one left empty.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* #960: making a header by double-click is an undoable, protected edit
insert.editHeader/editFooter stay pure and hand creation to the new
mutating insert.createHeader/createFooter; closeHeader removes empty new
ones through insert.removeEmptyHeaders. An empty new header is never
saved, one an undo brings back goes on the next close, and a new header
goes in the first section (linked to later ones, as in Word).
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Dmitrii Khlapov <19991457+dkhlapov@users.noreply.github.com>
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
Co-authored-by: Brandon Thomas <echelon@gmail.com>
* #1116: keep a paragraph's space after clear of the footnote separator
On a page with footnotes (already there or brought by the line), a
paragraph's last line only fits if its space after fits above the notes
area too; otherwise it goes to the next page with its note (and, with
widow control, one more line). Contextual spacing and automatic spacing
between list items drop the requirement; pages without notes are
unchanged (space after may still run past the bottom margin).
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* #1116: space after vs footnote separator uses the spacing code's tests, only on pages with notes
Contextual spacing drops a paragraph's space after only when that paragraph
asks for it, and the next paragraph counts as a list item only when it gets
a label (Numbering::shows_label), as in the spacing between paragraphs.
The kept space after is worked out only for a last line on a page with notes.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Dmitrii Khlapov <19991457+dkhlapov@users.noreply.github.com>
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
Co-authored-by: Brandon Thomas <echelon@gmail.com>
* Text boxes: VML text boxes keep their internal margins, fit to their text and alignment
A VML text box's inset ("l,t,r,b", ECMA-376 Part 4 §19.1.2.22) was ignored,
so its text sat Word's default 7.2 pt in and 3.6 pt down even where the file
says 0,0,0,0, which is how letterheads and form headers place address blocks
exactly. It's now read like DrawingML's lIns/tIns/rIns/bIns: each value left
out keeps the default, a bare number is in EMUs, o:insetmode="auto" leaves
the defaults. mso-fit-shape-to-text (VML's "Resize shape to fit text") is read
as auto-fit, like a:spAutoFit, and the shape's v-text-anchor as the text's
vertical alignment. In a group, a member's margins go with that member's
text.
The reader feeds layout, so the editor, PDF and page images all change.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Drawings: hidden shapes and pictures are kept but not shown
A drawing marked hidden (VML visibility:hidden, floating or inline;
DrawingML wp:docPr/@hidden, or a group member's cNvPr/@hidden) was drawn,
took room and wrapped text. Word for Windows shows it in no view; it's now
kept and saved hidden, but left out of layout: not placed, no wrap area, no
room in its line, nothing drawn, its text box's notes not placed. Exports to
other formats and copies leave it out, the accessibility checker no longer
asks for its alt text, and the selection pane says it's hidden.
Word for Mac draws hidden VML shapes; Windows follows the markup.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Naxvog <4963183+naxvog@users.noreply.github.com>
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
Co-authored-by: Brandon Thomas <echelon@gmail.com>
* Rulers: table column and row markers; indents in a cell measured from it (#700)
With the caret in a table, the rulers show the table, as Word's do:
- The horizontal ruler marks the column borders of the caret's row (past
the table's left edge); the vertical ruler marks the bottom of each of
the table's rows on the page. Each marker has the resize pointer, a
tooltip and a name for screen readers.
- Dragging a marker drags that border exactly like a drag on the page
(#600): a dashed guide, Escape cancels, one undo step on release
through `table.resizeDrag`. On the horizontal ruler only the column
left of the border changes and the columns right of it move along, so
the table's width changes (Word's ruler); a row marker sets the row's
height. The markers follow any drag of the table's borders, on the
ruler or on the page.
- In a cell, the indent markers and tabs are measured from the cell's
text area (its box less its margins); they were placed as if the
paragraph started at the page's margin.
- Layout: `cell_margins` (a cell's own margins, else the table's, else
Word's), so the ruler uses what the layout does.
- UI: crates/ui-egui/src/table_ruler.rs; table_resize.rs starts a drag
from a ruler marker (`grab`) and tells the ruler where a dragged border
is (`moved`), sharing that computation with the dashed guide.
- Tests: layout (cell_margins matches where each cell's text starts);
kittest with real pointer events: a column marker drag (the marker
follows, one undo step, the columns right of it keep their widths), a
row marker drag, and an 18 pt drag of the left-indent marker in a cell
indenting the paragraph 18 pt.
Progress docs updated: ui-parity (rulers 70% -> 85%), gaps (the ruler's
column markers are off the list), target-app-parity, ROADMAP. No new
commands or labels (the tooltips reuse "Table Column Width" and "Table
Row Height"). `cargo xtask ci` passes.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Rulers: Shift works the other way round on the ruler; row markers beside a vertical merge
Checked against Word (2019, Windows): on the ruler a column marker drag
changes only the column on its left and the columns right of it move
along (as before), and with Shift the neighbour makes up the difference,
so the table keeps its width; on the page Shift does the opposite. The
ruler now follows that: `ResizeDrag::plan` takes the Shift key and flips
it for a drag started on a ruler marker.
Since #669 a vertically merged cell's box spans all its rows, so a row
marker took the merge's bottom when the merge was the row's leftmost cell.
The marker now sits on the row's shortest box. (`Placed::Cell` patterns
take `..` for #669's new field.)
- Test (kittest, real pointer events): a Shift drag of a column marker
on the ruler gives the neighbour's width to the column on the left and
keeps the table's width.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: rabis <340973947+rabis7575@users.noreply.github.com>
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
Co-authored-by: Brandon Thomas <echelon@gmail.com>
* R17: no automatic paragraph spacing between list items
Word drops automatic (HTML-style) space before and after between two list
items, of one list or two, at any level; the first item keeps its space
before and the last its space after, and measured spacing stays. Measured in
Word for Windows: 16 synthetic cases. NIH's bulleted IND report items now
touch as in Word.
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
* ROADMAP: keep the progress log separator under its header
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
Found by rendering 12 US government Word documents (NIH, EPA, MCC) in
Word for Windows and WordCraft and comparing the pages side by side,
then pinning each rule down with synthetic documents measured in Word.
- Kerning: the shaper kerned every run, so WordCraft's lines held more
text than Word's and broke differently. Word kerns only a run with
Kerning for fonts (w:kern) at or above that size; no w:kern and
w:kern="0" are unkerned. New documents keep kerning from 1 pt, like
Word's Normal template.
- Automatic paragraph spacing (w:beforeAutospacing/w:afterAutospacing,
common in text pasted from web pages) was ignored. It is 14 pt at
any size, none before the document's or a cell's first paragraph,
none after a cell's last, and the larger of two neighbouring spaces
counts. Read, written back, and settable through para.spacing
(beforeAuto/afterAuto); a number, Ctrl+0 and Remove Space After
replace it as in Word.
Co-authored-by: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
* Layout: space before at the top of a page after page breaks, as in Word
Found comparing Microsoft's specification documents with Word for
Windows, then measured with 32 synthetic documents in compatibility
modes 12 (Word 2007) and 15 (Word 2013+):
- A paragraph that ends with a page break keeps its mark with the
break: WordCraft put an empty line at the top of the next page.
- The paragraph after it, first on the new page, gets no space before.
- A paragraph that starts with a page break starts on the new page
with its space before there (WordCraft put the space on the old page).
- A page break before keeps the space before in modes up to 14 and
drops it in mode 15.
- Natural breaks, section breaks and the first page were already right.
All 32 cases now land where Word puts them (within 0.3 pt), and the
caret still reaches a paragraph mark kept with its break.
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
* Layout: after a page break before or a section break, the space after above counts
Measured in Word for Windows (10 more cases): at the top of a page after a page break before
(modes up to 14) or a next-page section break, the previous paragraph's space after comes off the
space before (24 pt before after 10 pt after leaves 14 pt; after 30 pt leaves none). This put the
numbered Heading 1s of Microsoft's specification documents 9 pt too low. All 42 page-top cases now
match Word.
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
Found in NIH's SARP form compared with Word for Windows: the form's
second section has a narrow label column (67 pt) and a wide text column
(438 pt), and each answer starts with a column break into the wide one.
Before: the paragraph's lines were broken once, for the column it
started in, so the text after the break ran a word or two wide down the
wide column. After: when a column break lands the rest of a paragraph
in a column of another width, that rest is broken again for it, as in
Word. Equal columns are unaffected (nothing is laid out twice).
Co-authored-by: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
Word positions a floating object "relative to paragraph" (and to its line)
from the paragraph's start above its space before, below the previous
paragraph's space after. WordCraft measured from the first line, so floats
in spaced paragraphs sat lower by the space before. Measured in Word for
Windows: 10 synthetic cases.
Co-authored-by: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
* R21: an empty continuous section mark takes no room
An empty paragraph that only carries a section break before a continuous
section takes no room in Word: the text after it follows right on, and
columns balanced above it don't count it. A break on a paragraph with text
keeps its line. Measured in Word for Windows: 10 synthetic cases. The SARP
form's fields drifted a line lower at each of its continuous breaks.
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
* ROADMAP: keep the progress log separator under its header
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
Word moves a "keep with next" paragraph to the next page only when it would
fit on this one by itself; one that doesn't fit anyway breaks as usual, its
last lines going over with the next paragraph (with keep lines together it
moves whole). A chain of kept paragraphs moves together. Measured in Word
for Windows: 20 synthetic cases. NIH's five-line kept paragraph no longer
leaves a third of a page empty.
Co-authored-by: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
Found in NIH's monitoring-plan template compared with Word for Windows:
its footer puts the page number in a text frame (w:framePr: centred,
text wrapping around it), and Word draws "NCCIH DSMP Template" ending
just left of the number on the same line.
Before: frames other than drop caps were ignored on import, so the
number took a line of its own above the footer text (making every page
a line shorter), and the frame was lost on save.
After: a paragraph's text frame is read (size, anchors, alignment,
offsets, wrap, distances) and written back. In headers, footers, table
cells and text boxes it is placed like a floating object, sized to its
text unless it has a width, and the text after it wraps around it; the
DSMP footer now matches Word's. Frames in the body text still lay out
in line.
Co-authored-by: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
Read and write w:hideMark on table cells, and lay it out like Word: a cell's
empty last paragraph takes no room, spacing and all, so a row of only such
empty cells is just its borders; an ordinary empty cell keeps the row a line
tall. Measured in Word for Windows: 9 synthetic cases. NIH's Table A no
longer shows a blank row.
Co-authored-by: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
A Word 365 cover page lost its look. The missing fills came from
theme-coloured shapes (scheme colours and wps:style fill references),
which the reporter's 0.5.0 build didn't read; #611 fixed that on main.
Two causes were still open on main:
- A freeform (a:custGeom) inside a wpg group was drawn as a rectangle.
read_wsp now reads custom geometry, so group members get it as well.
- Text boxes ignored wps:bodyPr lIns/tIns/rIns/bIns and a:spAutoFit.
Layout always used Word's default margins, so a title box with no
margins that was just tall enough for its text lost its second line.
TextBody now carries the box's own margins and auto_fit. Layout uses
those margins and doesn't cut the text of a box that resizes to fit.
Both are written back on save.
Co-authored-by: Dmitrii Khlapov <19991457+dkhlapov@users.noreply.github.com>
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
Co-authored-by: Brandon Thomas <echelon@gmail.com>
* Layout: an inline picture wider than the text keeps its size, like Word
WordCraft shrank an inline picture, chart or shape that is wider than
its line to the line's width, height with it. Word draws it at its own
size: it runs past the margin and the page edge clips it, and the line
is as tall as the picture. In docxide-pdf's fixtures that moved the rest
of the page up (case179: a 1014 x 100 pt picture became 468 x 46 pt) and
shrank a header's 1014 pt logo strip to fit (alfies_arc).
All page outputs already clip at the page: the PDF page box, and the
page bitmaps the rasteriser and the editor draw. Text boxes don't clip
what runs past their sides yet, so a picture wider than a text box is
still fitted to the box rather than spilling over the page
(ParaEnv::fit_objects, part of the paragraph cache key).
On the 390 fixtures: case179 SSIM 70.9 -> 99.9%, alfies_arc 18.4 ->
74.8%, case178 98.0 -> 99.9%, nabl_lab 33.2 -> 36.8%; no fixture got
worse.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Review fixes for #745: fit imported and pasted pictures to the text width
Layout no longer shrinks oversized inline pictures, so pictures that come at their pixel
size are fitted when they enter the document, as Insert › Pictures already does:
- opening HTML (also from a path), Markdown, ODT, RTF and other formats-crate imports
(io::fit_pictures, against the narrowest section text width);
- pasting HTML/RTF (paste::adopt, against our text width).
Only inline pictures wider than the text are scaled, proportionally. DOCX keeps its sizes.
Test: tests::imported_pictures_fit_the_text_width.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Naxvog <4963183+naxvog@users.noreply.github.com>
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
Co-authored-by: Brandon Thomas <echelon@gmail.com>
* Numeral display modes: Arabic, Hindi, Context and System digits
Display-only digit substitution (Word File > Options > Advanced >
Numeral): ASCII and Arabic-Indic digits are substituted before shaping
while clusters keep indexing the original text, so find, spelling,
copy/paste and saved files see the typed digits.
- layout: NumeralMode (arabic|hindi|context|system) with System resolved
from LC_ALL/LANG, threaded through LayoutOptions/ParaEnv with cache
invalidation; Context follows the surrounding text
- engine: view.numeral command + catalog row
- tests: layout tests_numeral, engine command test
* Options page: Numerals picker in File > Options > Display
ComboBox for the view.numeral mode (Arabic/Hindi/Context/System),
mirroring Word's File > Options > Advanced > Numeral. Display-only,
session-scoped like the other Display options.
* fmt: collapse numeral direction branch
* #501: translate the Numerals option label in every catalog
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: abdo4312 <abdo4312@users.noreply.github.com>
Co-authored-by: Brandon Thomas <echelon@gmail.com>
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
foot_top_for measured the footer with total tracking still on, so a
NUMPAGES/SECTIONPAGES footer counted as a page total shown in the body and
every layout ran a second full pass. Footer totals are filled in after
pagination, like the header's, so the measurement now turns tracking off
the way body_top_for does.
Co-authored-by: Dmitrii Khlapov <19991457+dkhlapov@users.noreply.github.com>
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
Co-authored-by: Brandon Thomas <echelon@gmail.com>