vectorcraft/docs/three-d.md

Extrude & Bevel, Inflate and Rotate

The other three 3D types of Effect › 3D and Materials next to Revolve. Like Revolve each is a live effect: the source path stays editable, the effect draws shaded vector faces, and SVG/PDF export, native saves and Object › Expand Appearance use the same evaluator.

Select a path or compound path, then choose Effect › 3D and Materials › Extrude & Bevel…, Inflate… or Rotate…. The options dialog opens beside the artboard with tabs:

• Object (Extrude & Bevel and Inflate): the shape's own options, below.
• Rotation: a Presets menu, Rotation X/Y/Z (−180° to 180°) and Perspective. The rotation rings on the artboard turn the object about the centre of its bounds; Shift snaps to 15°.
• Lighting: Shading, the light's Direction and Elevation (or drag the light on the artboard), Intensity and Ambient, as for Revolve.

Preview changes are temporary until OK; Cancel restores the document; OK is one undo step. An object takes one 3D effect: edit its options in the Appearance panel, or remove it before applying another.

Extrude & Bevel

The art is the front face; its outline is extruded backwards by Depth (0–2,000 pt), so seen straight on the object is where the art was.

Option	What it does
Depth	0–2,000 pt. At 0 the object is flat (the art turned like Rotate).
Twist	0° to 360°: the back face turned against the front, the walls following in slices.
Taper	1–100 %: the back face's size against the front's.
Cap	Solid closes the front and back; Hollow leaves them open, showing the insides of the walls.
Bevel Shape	None, Classic (a straight chamfer), Rounded (convex quarter round), Cove (concave), Step (two steps) or Ogee (an S curve). Our own cross-sections.
Width, Height	How far the bevel reaches across the face and along the depth (0–1,000 pt each). The height is limited to the depth (half of it on each side with Bevel both sides).
Repeat, Space	The cross-section repeated 1–32 times across the width, with a share (0–90 %) of the width flat between repeats.
Bevel Inside	The bevel carved into the shape (the front face shrinks) instead of added around it (the walls stand outside the art).
Bevel both sides	The back is bevelled too.

Holes stay holes, with walls of their own. Bevels move each corner along its bisector (mitres are limited to four times the width), so a bevel wider than a narrow part of the shape folds over itself.

Inflate

The shape puffed out like a cushion: its outline stays where the art is and the surface rises towards the middle.

Option	What it does
Depth	0–2,000 pt of flat side between the front and the back.
Twist	0° to 360°: the back turned against the front (its puff too), the sides following in slices.
Taper	1–100 %: the back's size against the front's; a puffed back is lower in proportion.
Cap	Solid closes the back; Hollow leaves it off, so the inflated front is a shell open behind, its inside showing. The public documentation lists Cap for every 3D type without saying what it means for Inflate; this is our reading.
Volume	0–100 %. The surface is a membrane under even pressure, held along the outline (and around holes): it rises vertically from the edge and rounds smoothly inside, without creases along the shape's middle. At 50 % a circle becomes a half sphere; 100 % puffs twice as high, 0 % is flat.
Both sides	The back puffs out too; otherwise it is flat.

The surface is cut into a grid of 48 facets across the larger side, halved or quartered where it rises steeply near the outline (the cells meet without cracks), each clipped to the shape and flat shaded.

Rotate

The flat art turned in 3D about the centre of its bounds. Every fill and stroke is turned with its own paint (a stroke as its outline, so it foreshortens with the art) and shaded as one plane; a plane has two sides, so its back shows when it is turned past 90°.

Rotation presets

Front, Back, Left, Right, Top and Bottom face the art that way. Off-Axis tilts each 20° down and 25° aside, so the top and the right show. Isometric Left/Right/Top/Bottom lay the art on that plane of an isometric view (each visible axis foreshortened equally). These are our own values, from the geometry of each view; the dialog shows a preset's name when the angles match it and Custom otherwise. The new effects open at Off-Axis Front.

Parameters (effect.apply, effect.setParams)

threeD.extrude: depth, twist, taper (%), cap, bevel (none, classic, rounded, cove, step, ogee), bevelWidth, bevelHeight, bevelRepeat, bevelSpace (%), bevelInside, bevelBothSides. threeD.inflate: depth, volume (%), bothSides. All three take the view and lighting parameters Revolve uses: rotationX, rotationY, rotationZ, perspective (%), shade, lightAzimuth, lightElevation, lightIntensity (%), ambient (%). Lengths are points and scale with the object (Scale Strokes & Effects). Commands validate the shape and the parameters before the document changes.

What differs from the public documentation

Behaviour reference: the public 3D and Materials panel options and Create 3D objects pages, and the archived Extrude & Bevel option list (depth 0–2,000, cap on/off, bevel height, bevel extent in or out, perspective). No Adobe software, assets, presets or bevel shapes were used.

• Materials (base, Adobe Substance and graphics), several lights, light colour and softness, shadows and ray-traced rendering are not built: shading is one directional light, flat per face, painted with the object's top fill (else its top stroke) for Extrude & Bevel and Inflate.
• Perspective is a 0–100 % strength, as Revolve's, not a 0–160° lens angle.
• The bevel shapes and their names are our own; custom bevel paths are not supported.
• Visibility is a painter's algorithm: faces of a closed solid turned away are left out, the rest drawn back to front. Concave solids seen at steep angles can overlap wrongly; open (hollow) solids show both sides.
• Shading is flat per facet: an inflated rim seen almost edge-on shows faint banding where the facets get finer.
• Paths and compound paths only: convert type, images and groups to outlines first. One 3D effect per object.
• Curves are followed within 1/2000 of the shape's size (at least 0.05 pt), so a small curve takes a few points and a large one up to 32. Extrude & Bevel and Inflate take up to 2,048 outline points, Rotate (which only turns the outline) 65,536.
• 3D (Classic) (the track cube, surface types, blend steps, map art), Turntable and 3D export are separate, unbuilt items.