- A press inside a dialog the popped-out panel opened (Swatch Options from its
menu, say), or on a modal dialog's backdrop, put the panel away under the
dialog. The press now counts as away only when it lands on no foreground
layer (the flyout itself, dialogs, palettes) and not on the modal backdrop
(`dialogs::modal::backdrop`), as the popovers decide a click elsewhere.
- A press in the expanded dock's panel group left the flyout open: only the
icon column is spared now (its icons swap or close the flyout themselves),
so a click in another docked panel puts it away, as a click anywhere else in
the workspace does in the reference app.
- The test covers a click in a dialog, on its backdrop and in the docked group.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
The wheel did nothing over numeric fields. As in Illustrator, once a numeric
field has the focus, turning the wheel over it steps its value like Up/Down:
a notch a step, Shift ten, Ctrl/Cmd a tenth, applied at once with the new value
selected.
- widgets::step_value (was step_with_arrows) reads the arrows and the wheel
through one path for num_field, plain/mixed fields and the spin fields built
on them (panels, the Control bar, dialogs, the Font Size and Leading combo
boxes), and now opt_field (Stroke dash/gap) too. Trackpad and fine-wheel
points add up to notches; the rest carries to the next turn.
- While the pointer is over the focused field the panel under it doesn't
scroll; an unfocused field, or the pointer anywhere else, leaves the wheel to
the panel and the canvas as before.
- The dialogs' and preferences' egui drag values become the same recessed
number fields (widgets::range_field: clamped to their range, rounded to their
precision), so they type, step and scroll like every other numeric field.
- Headless tests for the wheel (units, modifiers, points, focus and pointer),
and for the panel scrolling or not; docs/control-protocol.md and ROADMAP.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Discord feedback: "EPS files are always rasterized: they open as bitmaps, in
other programs as vectors". Every EPS saved by Illustrator 2026 fell back to
its TIFF preview (`gcheck` was unknown), and cairo/Inkscape files stopped at
their first image (`status`), dropped masked images (ImageType 3) and failed
on mesh gradients; the warning didn't say where the program failed.
Fallback never silent:
- The warning names the PostScript error, the operator that raised it and
the named procedures it ran in, innermost first ("a PostScript error
(typecheck in `add`), in `inner` in `outer`"); errors caught by `stopped`
aren't reported. It reaches the status bar, document.open, app.open and
file.open (which now return document.open's result, so MCP's open_file over
the control channel gets it), and `vectorcraft-cli info` ("warnings").
- A file whose PostScript can't be read opens as its TIFF preview, else its
Windows metafile preview (as vectors, scaled to the bounding box), else its
EPSI bitmap. es @msg rows for the new messages.
Interpreter:
- Operators programs probe or use: gcheck/scheck, rootfont,
currentcolorrendering, currenthsbcolor, status, token, read,
bytesavailable, fileposition/setfileposition, resetfile, write*, pdfmark
(marks dropped, as Ghostscript does), execform, nulldevice, strokepath,
pathforall, user paths (ufill/ueofill/ustroke/uappend/upath/setbbox, the
encoded form too), setcachedevice2, findcolorrendering, cache, device and
VM queries, revision; (%stdout) (w) file gives a sink.
- `//name` is replaced by its value when read, inside procedures too.
- Tiling patterns become pattern swatches (their PaintProc drawn in pattern
space, one cell; uncoloured ones in the colour under them; makepattern
copies share one swatch); nested patterns stop at 8 levels.
- Type 3 fonts draw their glyphs (BuildGlyph/BuildChar, widths from
setcachedevice/setcharwidth) as outlines grouped per string, spaced by
ashow/widthshow/awidthshow/xshow/yshow/xyshow/kshow; glyphshow and
stringwidth/cshow use them.
- Shadings of types 1 and 4-7 become gradient meshes (data from arrays,
strings or files, packed or not, flags sharing edges), as fills through a
shading pattern too; sampled functions (type 0) are evaluated;
GradientMesh::coons/triangle are shared with PDF import.
- ImageType 3 masked images, interleaved by sample, by row or in separate
sources; ReusableStreamDecode reads its data when made; Flate/LZW PNG and
TIFF predictors.
- Bounded: DeviceN at 32 inks, sampled functions at 2^24 samples and 32
outputs, 4096 patches a shading, strokepath ignores dashes finer than 1e5
pieces, Type 3 glyphs nest 8 deep (a glyph that shows itself overflowed the
stack before the limit), 64-bit index maths for 32-bit targets.
Tests: a synthetic program per generator (cairo/Inkscape, its Type 3 fonts,
matplotlib, CorelDRAW, Affinity, LibreOffice, Ghostscript eps2write,
Illustrator procsets), meshes and function shadings, masked images, fault
messages, probing operators, metafile/EPSI previews, `//name`, user paths,
hostile patterns/glyphs/shadings (run against main, 12 of the 14 generator
and feature tests fail; CorelDRAW- and LibreOffice-style programs already
read there). The import fuzz vocabulary covers the new operators. Checked
against real files made here with Inkscape 1.4 (cairo) and Illustrator 2026
(its own format and the CS-to-CC compatibility formats; all fell back or
stopped early on main and open as vectors now; its Illustrator 8 format
needs the next commit); those files aren't committed.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Each preset in the Color dropdown has a chip of its colour before its
name; Custom has none, its name aligned with the others.
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
Type on a path could only be repositioned by Type on a Path Options, whose menu item sent
`{start: 0}`, so OK threw the text to the start of its path; nothing showed or dragged its
brackets. Now, as in Illustrator:
- Type on a path flows between a start and an end bracket (`TextKind::OnPath { end }`, None:
the end of the path or once round a closed one; `TextKind::path_span`). Flipping
(`TextObject::flip_on_path`) reverses the path keeping a closed path's first anchor and swaps
the brackets, so the type keeps its stretch of the path.
- Type on a Path Options gains Align to Path (ascender, descender, center, baseline) and
Spacing (glyphs spaced as if set that far above the path: closed up round the outside of
curves, opened up round the inside), laid out by the text engine.
- `type.pathOptions {start?, end?, flip?, effect?, alignToPath?, spacing?, ids?}` sets them in
one undo step; with none of them it queries. The menu item opens the dialog with the selected
type's Effect, Flip, Align to Path and Spacing (dropdowns for the choices) and leaves the
brackets alone, so OK as opened changes nothing.
- The Selection and Direct Selection tools show selected type on a path's path and its start,
centre and end brackets (`tools::pathtype`, with a bracket cursor): dragging the start or end
bracket sets where the type runs, dragging the centre bracket slides it along the path and,
across the path, flips it (Cmd/Ctrl held: it only slides). Each drag is one undo step.
- Arc-length measuring moved to `vectorcraft_geom::ArcPath` (layout, the tools and
`text.createInPath` share it). SVG export outlines path type whose end bracket, alignment or
spacing `<textPath>` can't express.
- docs/mcp.md documents the command and the drags; ROADMAP updated; dialog strings translated.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Dragging a numeric field's label left or right steps the field's value,
as Photoshop's scrubby labels do (beyond Illustrator): one unit every
2 points, ten with Shift, a tenth with Ctrl/Cmd (counts stay whole), in
the field's unit and precision. The panels apply each value as they
apply a typed one, so the art follows live and the caller's limits
hold (dragging back from a limit changes the value at once).
- scrub.rs: the label zone over the label noted just before a field
(dim_label, label_row, widgets::field_label, the Character and
Paragraph panels' icons, the Transform and Properties rotate/shear
icons), the ↔ cursor on hover, a click on the label focuses the
field. The text box itself never scrubs; a field without a label
doesn't. num_field, plain_field, mixed_field (and the spin fields)
and opt_field take part.
- Engine: undo groups (Session::begin_undo_group / end_undo_group). The
edits made in a group, commands and committed live drags alike, are
one undo step, journaled one by one; a cancelled group is undone and
dropped from the journal. The app opens one while a label is dragged,
so a scrub is one undo step whichever path the panel applies values
by (app.run, session.execute, live_run), and Escape cancels it
(shortcuts leave Escape to the drag, so it doesn't close a dialog or
deselect).
- Preferences > General > Scrub Numeric Fields by Dragging
(`scrubNumericFields`, on by default), translated in ja, es, zh-hans,
zh-hant and pt-br.
- Tests: label drags with Shift/Ctrl, limits, counts and units, Escape,
the preference, the cursor, click-to-focus, no scrub on the box or
without a label, and in the app one undo step for a W drag.
- ROADMAP and docs/mcp.md.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
The modal dialogs were anchored to the window's centre, so none of them
could be moved. They now share one modal frame (dialogs/modal.rs): the
band from the window's top edge down to its heading moves it, as a title
bar would, with a grab cursor; it stays on screen and keeps where it was
moved (per dialog, for the session). The shared dialog frame, New
Document (and More Settings), Preferences, Keyboard Shortcuts,
Workspaces and Find Font all use it; About moves by its title bar.
The form dialogs drew every string field as a text box, so Offset
Path's Joins had to be typed. Their choice fields are now dropdowns
(Joins: Miter, Round, Bevel; Average's axis; Shear's and Reflect's
axis), the fields follow the dialog's order (Offset, Joins, Miter Limit;
Rows, Columns, Gutter) instead of alphabetical, and Offset Path has a
Preview that Cancel rolls back.
The axis labels are translated in a new "axis" catalog context: the
plain Horizontal and Vertical rows mean writing direction in Japanese.
ja, es, zh-hans and zh-hant get the axis rows (Horizontal, Vertical,
Both) and Joins, Miter, Bevel, Offset and Axis.
Headless tests drag the heading of four dialog windows (moves, a drag
below the heading doesn't, kept on screen, reopens where it was left),
open the Joins dropdown and choose Round (same result as the command
with round joins), and check the axis dropdowns and the preview.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Fourteen more Preferences options that were stored but read by nothing now
act, for the mouse and for agents (prefs.set, then pointer_gesture,
press_key or the commands):
- Selection & Anchor Display: Snap to Point and its distance (with Smart
Guides off, View > Snap to Point lands a dragged selection's grabbed
point, drawn points and reference points on anchors and ruler guides);
Move Locked and Hidden Artwork with Artboard (artboard.move, the Artboard
tool and Rearrange; off, hidden art now stays too); Enable Rubber Band for
the Pen and Curvature tools; Handles (solid, hollow, large);
Show handles when multiple anchors are selected (canvas and Direct
Selection's handle picking); Hide Corner Widget for angles greater than.
- General: Transform Pattern Tiles is the default of a new `patterns`
param on object.transform/move/rotate/scale/reflect/shear/transformEach
(journalled when the art uses a pattern), and the transform dialogs get a
Transform Patterns checkbox; Select Same Tint % (off, Select > Same
Fill/Stroke Color takes every tint of a global or spot swatch).
- Type: new type.step {attribute, by} steps size, leading, tracking, kerning
and baseline shift by the Size/Leading, Tracking and Baseline Shift
increments; Increase/Decrease Font Size (Cmd+Shift+. and Cmd+Shift+,);
the Type tool's Alt+arrows (kerning at a caret or tracking, leading,
Shift for baseline shift, Cmd/Ctrl for five steps). Enable Missing Glyph
Protection keeps characters a new font lacks in the font that had them
(text.setStyle, text.setRangeStyle). Fill New Type Objects With
Placeholder Text: type the Type tools place starts with placeholder text,
selected (text.create / text.createInPath take `placeholder`).
Units > General, Stroke and Type were already the single source of truth
(units.rs). Auto Size New Area Type, Show Font Names in English and
Highlight Alternate Glyphs need subsystems the app doesn't have yet and
stay open with the rest of #394.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* About: contributors compiled in from contributors.json (grab bag + table, sortable, name toggle)
Help > About VectorCraft gains Contributors and Models tabs next to the existing About
content, following the craftrules standard (standards/contributors.md):
contributors/contributors.json is generated by craftrules/scripts/contributors.py and baked
into the binary by crates/ui-egui/build.rs as static tables (credits.rs). Each contributor
line: @username, opt-in display/real name, PRs, commits, lines +/-/delta, binary assets +/-,
first/last commit. Sortable by every column; alphabetical ignores case and the leading @.
Labels are translated (ja, zh-hant, pt-br catalog rows).
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Contributors docs: craftrules is two levels up (../../craftrules)
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Contributors: self-submitted names in contributors/people.toml; AGENTS.md credit-yourself section
build.rs reads contributors/people.toml next to the generated contributors.json and shows a name only
for entries the generator verified as written by that person (craftrules standards/contributors.md).
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Contributors: regenerate (verified people.toml entries)
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* i18n: credits labels for catalogs added on main since this branch
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Contributors: regenerate after rebase onto main
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Contributors: regenerate (verified people.toml entries)
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
The Fidelity slider names its ends, Accurate and Smooth, through a
shared form::slider_ends that the Color Guide Options' Less/More now use
too. The dialog's strings get Spanish rows (complete catalog), and
Accurate rows in every catalog. ROADMAP: the Drawing tools row lists
what the freehand Tool Options still lack (Keep selected, Alt to the
Smooth tool, Blob Brush Merge Only with Selection, brush angle and
roundness).
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
The five freehand tools keep options (Fidelity, fill, the two
tolerances, the brush size) that last across tool switches and are
saved with the preferences, but nothing in the window showed or changed
them: a double-click on the tool's button answered "the pencil tool has
no options", which the toolbar drops. It now opens a Tool Options dialog
with the options the tool has, and OK sets them with tool.setOption. The
dialog's strings are in the Japanese, Chinese (both scripts) and
Brazilian Portuguese catalogs.
Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>
A live rectangle stored four corner radii but drew them all with the largest,
and the corner widgets always rounded all four corners, so one corner could not
be rounded on its own.
- geom: rectangle_with_corners draws each corner with its own radius and kind
(Round, Inverted Round, Chamfer); a sharp corner is one anchor, a cut one two.
Uniform corners keep the exact rounded-rectangle anchors.
- doc: LiveShape::Rectangle gains `kinds` (saved only when a corner isn't round;
older files read as round), plus helpers mapping anchors to corners.
- engine: object.setLiveShape takes `corners` and `kind`; without `corners` it
edits the Direct-Selected corners, else all four, and keeps the selected
corners selected as their anchors change.
- tools: with Direct Selection, only the selected corners show widgets and a
drag rounds just those; Alt-click cycles the corner kind; double-click opens
the new Corners dialog (also `ui.corners`).
- ui: Properties/Transform radius fields show and set the selected corners;
CSS export keeps per-corner radii and skips cut-in corners.
- docs: mcp.md (Live Corners), control-protocol.md (Corners dialog), ROADMAP.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
A file's saved selections are untrusted: on load at most 25 are kept, names
are trimmed, capped at 255 characters and unique, and ids the document
doesn't have are dropped (after fix_next_id such an id would select whatever
object is drawn next). Save and Edit Selection cap names the same way. The
limit, the name cleanup and the default "Selection N" live on
SavedSelection, shared by the engine, the Save Selection dialog and the
Select menu's slot table. docs/mcp.md documents the select.save /
savedList / recall / editSaved commands; ROADMAP counts 13 stubbed menu items
and names what's still missing (Update Selection, the Layers panel menu).
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Rotate, Scale, Move and the other form dialogs opened with no field
focused, so a typed value went nowhere and Enter applied the default (a
Rotate by 0 degrees). The frame a dialog opens on (after the window's
measuring frame), its first text or number field takes the keyboard
focus with its text selected, so typing replaces it and Enter applies
it, as in the reference app.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Rows at every depth highlight on click (Shift range, Ctrl toggle) and make
their layer current; selection squares select a row's art and drag the
selection to another row; eye and lock on every row with drag-down-the-column
in one undo step and Ctrl-click for Outline; Alt-click triangles; drag and drop
rows above, below or into layers and groups with a drop line (Alt copies);
Delete key; the full panel menu, Layer Options and Panel Options dialogs.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
On hybrid-graphics laptops (an integrated GPU driving the display plus a
discrete one), egui-wgpu's default power preference is HighPerformance, so
VectorCraft rendered on the discrete GPU and its frames were copied to the
display through the integrated one. On an Asus ZenBook with Intel Iris + Arc
the window flickered whenever the mouse moved over it (#306, #305).
The canvas is rasterized on the CPU (vello_cpu) and the GPU only composites
the canvas texture and draws the UI, so the integrated GPU is plenty. The
desktop app now asks wgpu for the power-saving adapter by default.
Single-GPU machines are unaffected.
- Preferences > Performance > Graphics Processor (`gpuPreference`:
powerSaving, the default, or highPerformance), with a note that it
applies after a restart. The app reads it from the saved preferences
before the window opens. WGPU_POWER_PREF still overrides it.
- Help > About and `ui.inspect` (`graphicsAdapter`) name the adapter in
use, and it is logged at startup, for future GPU bug reports.
- Docs (README, docs/development.md) and ROADMAP updated.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
On the in-window menu bar (Windows and Linux) each top-level menu needed
its own click: with File open, moving the pointer onto Edit or Object did
nothing. Now, as on a native menu bar, while one menu is open a moving
pointer that reaches another title opens that menu instead (ported from
PhotoCraft). A pointer resting on a title doesn't switch, and a tall menu
that covers the bar doesn't switch to the title underneath it. The native
macOS menu bar is unchanged.
Also adds a regression test for #292: the Simplify, Offset Path, Move,
Rotate, Split Into Grid and Average dialogs are 366 pt wide in a 1600 pt
window (already fixed by #239).
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Save Selection… asks for a name and keeps the selection in the document (saved with
the file, undoable, at most 25) instead of in session memory keyed by the title.
Each saved selection is listed at the bottom of the Select menu and a click selects
its objects again. Edit Selection… opens a dialog with the list to rename or delete
them, applied together on OK as one undo step (select.editSaved takes `edits`).
The menu stub count in the ROADMAP goes from 16 to 15.
Dragging a bounding-box handle of area type with the Selection tool now
resizes the type area: the text reflows at its own size (threads too)
instead of being scaled, and History says "Resize Type Area". With other
objects selected they scale as before while the area type resizes its
frame. Direct Selection picks the frame's corners and edges and reshapes
the area ("Reshape Type Area", new command text.reshapeArea), and the
selected frame's anchors and outline show. Area Type Options gains Width
and Height. Point type, rotation, Object > Transform > Scale, the Scale
tool and the Transform panel still transform the type.
Root cause: every handle drag previewed object.transform, which folds the
matrix into the text's xf (TextObject::transform), so area type scaled its
glyphs; and Direct Selection's anchor hit test only looked at paths, so the
frame's corners could not be picked. object.transform now takes
typeAreas, which reshapes the frame in text space (xf^-1 * m * xf), and
the tools use it and text.reshapeArea.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
panels::label_or_name and dialogs::shown_names applied the same rule; it
now lives once as i18n::label_or_name (explicit language, testable) and
both delegate to it. zh-hant gains the two normal text style names the
Character and Paragraph Styles panels translate.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Lists and headings that mix our labels with names no longer send the
names through the catalog, so a preset, printer or plug-in called
"Regular" or "Black" keeps its name in every language.
- dialogs::shown_names / mixed_dropdown: translate only a list's built-in
entries and show the rest with widgets::dropdown_names (same indices).
- Artboard lists (Save for Office, Save for Web, save options) and
plug-in choices: dropdown_names.
- Mixed lists translate only their built-in entries: Recolor's Limit to
Library, Save for Web, Print, Save PDF and Export for Screens presets,
printers (Default Printer, PDF File), colour profiles and flattener
presets (profile_pick, flatten::preset_dropdown), perspective presets,
New Document's preset cards and Size, and the shortcut set.
- Plug-in dialogs and plug-in effects are headed by the plug-in's name as
it is; plug-in parameter labels are not translated.
- The confirm dialog shows its message and detail as given, and the
shared frame no longer translates headings again: each heading is
translated by its spec. File > Revert translates its template before
filling in the document's name.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Strings in code stay English and are the lookup keys; `crates/ui-egui/src/i18n`
maps them to display text at render time from one `*.tsv` catalog per language
(`LANGUAGES` registry, `tl!`/`t`/`tr`/`tr_ctx`/`tr_id`/`tn`/`fmt`). Command ids,
menu paths, `ui.menu.list`, the control channel, the CLI, MCP, status messages
and undo labels never see translated text, so agents, scripts and the existing
tests are unaffected (under `cargo test` the UI is always English).
Wired: in-window menus and the macOS native menu (rebuilt on a language change),
dynamic labels (Undo X, Reset X, Last Effect: X as templates), the command
palette (matches English and translated text), dock tabs, panel tooltips, the
toolbar (category names now cut by characters, not bytes), the dialog frame, the
shared widgets, the Preferences dialog, the shortcut editor, the hint and status
bars, the Home screen, and the literals of every panel and dialog.
Preference `interfaceLanguage` (User Interface › Language): `auto` or a code.
`auto` follows `VECTORCRAFT_LOCALE`, `LC_ALL`/`LC_MESSAGES`/`LANG`/`LANGUAGE`,
the macOS preferred languages and, on Windows (which sets no `LANG`), the user
locale from `HKCU\Control Panel\International`. `zh-TW`/`zh-HK`/`zh-MO`/
`zh-Hant-*` resolve to `zh-hant`; Simplified locales stay English until a
`zh-hans` catalog exists.
`zh-hant.tsv` (~2,850 rows) is clean-room, in the vocabulary used in Taiwan;
terms shared with PhotoCraft reuse its wording, vector terms use everyday
vector-drawing vocabulary. Tests: catalog well-formedness (placeholders,
ellipses, command ids, no Simplified characters), locale resolution, and two
coverage tests that fail when a menu string, panel/tool/preference label,
dialog button, hint-bar fragment or `tl!` literal has no row in a language
marked `complete_menus`. `VECTORCRAFT_I18N_DUMP=file cargo test -p
vectorcraft-ui-egui dump_source_strings` lists the strings for translators.
Also: two clippy findings under rustc 1.97 fixed in passing.
Integrated with main (squashed onto it, 42 commits on): the Czech interface
(#213) moves from its Rust table to `i18n/cs.tsv` on the registry (all 556
rows, Czech plural rule, its menu-coverage and glyph tests kept); Find Font's
resolution notes and the canvas context menu's labels are translated and
covered by the catalog tests (`menus::CONTEXT_LABELS`); the glyph test checks
CJK text only when the craft-fonts build input is embedded (#220 moved the
Japanese fonts out of this repository); a language saved by an older version
carries over to `interfaceLanguage`; Windows' locale lookup runs reg.exe by its
full path.
Co-Authored-By: Claude Fable 5.1 <noreply@anthropic.com>
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
The OK/Cancel row was laid out right to left at the full available
width, and a dialog without a maximum width may use the whole window:
the row, and the window with it, spanned the window (Clean Up, Blend
Options, every generic parameter dialog). The row now spans the fields
above it, at least the dialog's minimum width, so a dialog is sized to
its content.
Fixes#238.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
VectorCraft ▸ Language gains Čeština (`app.language {lang: "cs"}`,
persisted as "cs"). `Language::tr` now picks a table per language.
The Czech table (crates/ui-egui/src/i18n/czech.rs) translates every
menu title, submenu, item and header in the menu tree, plus the labels
toggling items switch to (Show/Hide Guides, Lock/Unlock Grid, Outline/
Preview, Edit Contents/Edit Envelope…). It was written clean-room from the
meaning of the English labels: commands in the infinitive, menus as nouns.
Left as-is on purpose: the product name, language names, OpenType, the
built-in workspace names and the perspective grid preset names.
Tests:
- every Czech (and Japanese) entry is a menu label, toggled labels included;
- Czech covers every menu label except fonts, sizes, plug-in names and
an explicit KEEP_AS_IS list;
- ellipses match their source label, entries are unique;
- the Language menu lists every language; `cs` validates and persists;
- each UI font family's own first font has the Czech letters and
punctuation (no system fonts needed).
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
- Edit Contents: while an envelope's contents are edited, clicks hit the
content where it sits undistorted and the Selection tool selects it; the
menu item reads Edit Envelope then. No default shortcut: the reference
app's (Shift+Cmd+V) is Paste in Place here.
- A selected envelope shows its mesh (a warp's surface grid, a mesh's own,
a top object's outline) instead of its content's outlines.
- Mesh envelope points get bezier handles (append-only; none stored is the
smooth Catmull-Rom mesh, which the first handle edit fills in exactly
along the grid lines). setMeshPoint takes `handle`; object.mesh.movePoint,
addLine and deletePoint edit mesh envelopes too. The Mesh tool and Direct
Selection drag points and the clicked point's handles (shared MeshEdit);
the Mesh tool adds rows and columns inside mesh envelopes. Reset with
Mesh keeps the shape along the grid with handles; Release returns the
exact mesh.
- Control bar: Edit Envelope / Edit Contents, warp style, orientation,
bend and distortions or mesh rows and columns, Reset, Envelope Options.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
The Perspective Grid tool's left and right ground-level points move the whole
grid; the left and right extents are separate (extentRight; Alt drags both,
Shift goes by whole cells); a cell size widget sits up the line where the planes
meet; Shift keeps a vanishing point on the horizon and the ground points and
origin on one axis. The Plane Switching Widget stays put in a corner of the
document window (ViewInfo/ToolContext carry the window as a ScreenFrame), takes
its clicks with any tool while the grid shows (the Perspective Selection tool
too while it's hidden), and 1-4 pick the left, horizontal, right and no plane.
Double-clicking the Perspective Grid tool opens Perspective Grid Options
(show the widget, its corner; perspective.widget.options, kept with the
preferences).
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Type and symbol instances attached to a plane keep their art and carry a projection
(Node.perspective.projection, append-only); the canvas and every export draw their outlines
through it (reshape/bake), so they are foreshortened and stay type and symbol instances. Bounds,
hit testing and transforms follow the projection. Object › Perspective › Edit Text
(perspective.editText, or double-clicking with the Perspective Selection tool) shows the type flat
where it is drawn in isolation mode; exiting isolation projects it again. Release with
Perspective keeps their look. Copies, pastes, duplicates and Selection-tool moves keep the
attachment (the art moves as dragged). Flare, spiral and polar grid draw on the active plane, and
so do the click-to-size shape dialogs (perspective.draw `at`: sizes in plane units).
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Holding the brush still keeps Twirl, Pucker and Bloat applying, scaled by the
time held: a new Tool::tick (time supplied by the host: canvas frames, or
`holdMs` on ui.pointer / pointer_gesture events) repeats the last point every
0.1 s, one more dab there. Liquify never touches graphs, meshes, type, symbols,
images, or envelopes, repeats and blends with their contents, nor guides in
selection mode; those under the brush come back in `skipped` with a `warning`
that the status bar shows (UiRequest::Status). A drag applies only the dabs
each new sample adds (the stroke's state is kept between previews), giving the
same result as the whole stroke, so journal replay still reproduces it.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
View > Perspective Grid gains Show/Hide Rulers, Snap to Grid (on by default),
Lock/Unlock Grid and Lock Station Point, with flipping labels and checkmarks (and
Show/Hide Grid's label). Lock Grid stops the grid widgets from dragging; Lock
Station Point swings the other vanishing point around the station point; Snap to
Grid lands drawn corners and moved edges on gridlines within a quarter cell
(perspective.draw/move take snap?); Show Rulers draws a ruler up the true height
line in the grid's units. Gridlines draw in the Define Grid colours and opacity.
New commands perspective.grid.lock/lockStation/snap/rulers (view state).
Existing tests that measure exact perspective moves (two in tests_distort.rs,
the persp_session helper of tests_persp_select.rs) turn snapping off first (it is on by
default and would move their exact corners onto gridlines).
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
The grid keeps per-plane offsets (leftOffset, rightOffset, groundOffset). Each plane has a widget
(a diamond in its colour) that the Perspective Grid and Perspective Selection tools drag: plain
moves the plane, Shift moves the objects on it too, Alt copies them (perspective.plane.move).
Double-clicking a widget, or ui.perspectivePlane, opens the plane's options dialog (location; Do
Not Move / Move All Objects / Copy All Objects). Object › Perspective › Move Plane to Match Object
(perspective.plane.matchObject). New objects attach where the plane is. Grid edits leave
attached art in place as the reference app does; perspective.grid.set {reproject: true} moves it
with the grid.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Blend Options is a dedicated dialog (Spacing dropdown with its value,
Align to Page / Align to Path buttons, live preview) opened on the
selected blend's own options, so OK no longer turns Smooth Color into
5 steps; with nothing selected it sets what new blends start with
(object.blend.info reads them). The Blend tool blends from clicked
anchor points (blend spec `starts`), adds keys to an existing blend
instead of nesting it, opens Blend Options on double-click, Alt-click
and its toolbar button, and has its own cursors and hint.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
View > Perspective Grid > One/Two/Three Point Perspective list the built-in views
([1P/2P/3P-Normal View], plus Low and High views generated in code) and the saved
presets of each type; Save Grid as Preset... and Define Grid's Preset menu and Save
Preset... save the fields. Edit > Perspective Grid Presets... (previously a
mislabelled reset to the two-point grid) manages them: New, Edit, Delete, Import,
Export (.vcperspective), stored with the preferences. New commands
perspective.presets.list/save/delete/export/import; perspective.grid.preset takes
a preset name. Preset import is fuzzed.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Double-clicking a Liquify tool opens its Tool Options (dialog liquifyOptions):
the shared Global Brush Dimensions (Width, Height, Angle, Intensity, Use
Pressure Pen), the tool's options (Detail, Simplify with its checkbox, Twirl
Rate, Complexity, Brush Affects, Horizontal/Vertical) and Show Brush Size.
The canvas captures pen pressure from pen/touch force, ui.pointer and MCP
pointer events take `pressure`, and object.liquify takes [x, y, pressure].
Fixes: LiquifyParams::to_json now sends affectAnchors/In/Out; Alt-drag sizes
the brush from its current size (Shift keeps proportions) instead of
collapsing it. Hint-bar text for the seven tools. Registers the MCP Liquify
tests file added in M8.2.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Make with Warp and Make with Mesh open dedicated dialogs (style dropdown,
orientation, bend and distortion sliders; rows and columns) with live
preview; while an envelope is selected the menu shows Reset with Warp /
Reset with Mesh instead, which switch the envelope's kind and keep its
content (Maintain Envelope Shape samples the current surface). Envelope
Options is a full dialog prefilled from the selection (Anti-Alias,
Preserve Shape, Fidelity, Distort Appearance, Distort Linear Gradients,
Distort Pattern Fills); with nothing selected it sets the defaults for new
envelopes. object.envelope.info reads the settings. Release returns the
warp or mesh shape as a gradient mesh and keeps opacity, blend mode and
mask; Expand keeps name, knockout, isolation and mask; Object > Expand
expands envelopes.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
View > Perspective Grid > Define Grid... opens a dedicated `perspectiveGrid` dialog
(ui.perspectiveGridDialog) prefilled from the current grid instead of a generic
form with fixed defaults that forced kind 2. The grid model gains (append-only)
name, viewing angle (the station point), units, scale, plane colours and opacity;
grids with a viewing angle foreshorten each axis as a true camera. New commands:
perspective.grid.get (read-only) and perspective.grid.define (one undo step,
only changed fields apply).
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
The issue asked for a vector halftone that turns art or an image into
vector dots, lines or shapes by tone, with angle, frequency, shape, mono
or CMYK separations and clipping to the object. Nothing like it existed.
object.vectorHalftone renders the selection offscreen, samples its tone
once per cell of a grid turned by the screen angle and places a shape
whose area follows the tone (circle, ellipse, square, diamond or line).
Mono screens follow lightness in one colour; CMYK screens follow the ink
amounts the CMYK output separates, one screen per ink at the classic
angles, multiplied over each other. Dots are clipped to the art's
outline as real geometry (only the dots crossing it go through a
boolean). It is a command rather than a live effect: the live pipeline
can't sample rendered tone when exporting. Its dialog previews live and
OK keeps it as one undo step.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
The issue asked for non-destructive colour adjustments in the Effect menu
and the Appearance panel that work on vector paints, live type and
embedded images. Only the destructive Edit Colors commands existed, and
the live-effect pipeline only knew geometry and raster effects.
Effect > Color Adjustments adds six effects (adjust.*). They recolour,
in stack order, everything an object paints with: fills and strokes
(gradient stops too), type, gradient meshes, embedded images and a
group's members, each colour keeping its model. The Edit Colors walk over
an object's colours moved to vectorcraft_doc::recolor so the commands
and the live effects share it. The renderer draws adjusted art through
its object-effect path (recoloured images cached within a memory
budget), exports bake the adjusted colours (images as recoloured
copies), and Expand Appearance makes them permanent. The effect dialog
shows sliders, a channel menu and a draggable Curves graph, all previewed
live as one undo step.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
The Save / Don't Save / Cancel prompt (and every dialog in the shared
dialog frame) is as tall as its text and buttons at every UI Scaling value,
including when the scale changes while it is open, and never wider than the
window: at 2x in a small window the question wraps instead of running off
the left edge.
Root cause: the tall, mostly empty prompt in the report was the shared
frame's button row taking all the window's height, fixed on main by
d3df1bce (M14.1). What remained was the width: the frame's minimum and
maximum widths are in points, and at a large UI scale a small window has
fewer points than the dialog's 466 pt, so it overflowed the window. The
frame now caps both widths to the window.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
VectorCraft had an Additional Plug-ins Folder preference but nothing loaded from it. Port
PhotoCraft's wasmi plug-in host (same sandbox, manifest and parameter schema) as the new
vectorcraft-plugins crate (L2), extended for vector documents:
- Object filters read the selected paths and compound paths as JSON (native PathData and
Paint forms: geometry, fills, strokes, gradients, opacity) and return the objects to keep,
change, add or delete; the output is validated in full and applied as one undo step
(plugin.run). A failing plug-in leaves the document untouched.
- Live-effect plug-ins are geometry effects in the appearance stack (effect id
plugin.<id>), re-evaluated (and cached) when the object or parameters change, editable,
exported and baked by Expand Appearance; a missing plug-in leaves the geometry as is.
- plugin.list / info / run / install / remove / reload; the preference folder installs
every *.wasm at startup and when it changes; File > Open of a .wasm installs it (web).
- Object > Plug-ins and Effect > Plug-ins menus with dialogs generated from the parameter
schema (live preview), the Appearance panel's fx menu, docs/plugins.md, an original
example plug-in (Desaturate, a Rust crate outside the workspace) and fuzzing of the
plug-in boundary (engine/tests/plugin_fuzz.rs).
Tool plug-ins and paint-changing live effects are left for later (docs/plugins.md).
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
egui 0.36 needs rustc 1.95 (hayro and krilla 1.92), so the declared 1.90 let
cargo fail on dependency versions instead of naming the toolchain. Clippy 1.95
also flagged four collapsible matches that newer clippy no longer does; each is
rewritten without changing behaviour.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
compatibility "1.3" writes a %PDF-1.3 file (its XMP metadata says 1.3
too) without transparency: a copy of the document is flattened first
with flattenerPreset (stored with PDF presets; empty is High Resolution)
and the flattener options over it, see-through image pixels counting as
transparency and rasterized areas clipped to their regions so no soft
mask is needed. Page groups are left out and the writer refuses a file
that would still have transparency. PDF/X-1a and PDF/X-3 share this
path (their version is now PDF 1.3; 1.4 is still accepted and written
as 1.3), and with it the preset, the header and metadata code and the
transparency check. Passwords at PDF 1.3 encrypt with 40-bit RC4
(revision 2). The Save PDF dialog lists PDF 1.3 and picks the flattener
preset under Advanced.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Embed Page Thumbnails gives every page a /Thumb image: the page drawn on
white, 106 px on its long side, without the layers the page leaves out
(the engine draws them; vectorcraft_pdf::page_areas says what each page
shows; PDF/X files get grey ones). Optimize for Fast Web View writes a
linearised file: the objects are put in linearised order and numbering,
encrypted when a password asks (the encryption dictionary goes with the
catalog, PDF layers' groups too), then laid out with the linearization
dictionary, both cross-reference tables and the page offset and shared
object hint tables (the hint stream encrypted like any other). Their
"not applied yet" warnings are gone. Reading the objects back uses the
lexer of encrypt.rs (syntax.rs adds what rewriting needs).
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Create PDF layers from top-level layers (document.exportPdf createLayers, the
Save PDF dialog's General option) now writes an optional content group per
top-level layer (template layers are left out): named as the layer, off when
the layer is hidden, /PrintState /OFF when its Print option is off, locked
when it is locked, listed top first, with a print auto-state (not under a
standard). The file reopens with those layers.
The PDF writer has no optional content, so each layer is drawn as a form of
its own (no transparency group, so it draws as in place) starting with a mark;
after writing, the uses of the layers' forms are wrapped in /OC ... BDC/EMC
and the catalog gets /OCProperties (crates/pdf/src/forms.rs, through the
shared patch writer and the PDF syntax reader of encrypt.rs). PDF 1.4 and a
knockout page group write plain page content with a warning; the dialog greys
the option at 1.4. The "not written yet" warning is gone.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
The pdf crate's PrintSettings gains advanced {printAsBitmap,
overprints: preserve|discard|simulate, flattenerPreset} and
color.profile, all defaulting so saved print_setup values still load.
Composite output discards overprints (no /OP) or simulates them as
Overprint Preview draws them; separations keep them. A printer profile
converts composite colours with the chosen intent (a CMYK one writes
device CMYK) and separations separate with a CMYK one. The engine
flattens transparency with the preset, or renders each printed region
as one image for Print as Bitmap, before PDF or PostScript layout.
The Print dialog's Advanced and Color Management sections show them.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
View > Show Print Tiling (view.printTiling) draws the pages of the
document's print settings on the canvas, dashed and numbered, from
print.preview's own layout (print.tiling), so the canvas and the
printed job agree. The Print Tiling tool replaces the no-op tool: a
drag places the first page's imageable corner (print.tiling.set,
saved as print_setup.tileOrigin, one undo step); a double click on
the canvas or the tool button resets it. Tiles start at the origin
and extend to cover the art; the Print dialog shows the tool's
placement with a Reset button.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
document.exportPdf {standard: pdfX1a|pdfX3|pdfX4} and the PDF/X presets now
write conforming files instead of being refused:
- every PDF/X file gets a /GTS_PDFX output intent (by default the CMYK
profile in effect, embedded), TrimBox, Trapped, GTS_PDFXVersion (and
GTS_PDFXConformance for X-1a), a title and dates; editing data,
passwords and, in X-1a/X-3, PDF layers are refused
- PDF/X-1a converts every colour and image to a CMYK destination,
untagged, with CMYK spot alternates; X-3 and X-4 tag colours with ICC
profiles
- X-1a and X-3 are written as PDF 1.3 and their transparency is flattened
first (High Resolution preset; images with see-through pixels count,
rasters stay opaque); X-4 keeps transparency, is PDF 1.6 at most and
names the standard in its XMP metadata
- the written file is checked against its standard (soft masks,
transparency groups, opacity, blend modes, RGB in X-1a, fonts not
embedded) and refused rather than mislabelled
- choosing a standard sets the latest compatibility it allows and turns
off what it forbids (engine and Save PDF dialog)
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
The Print dialog's Print Preset list loads [Default] or a saved preset
(reading [Custom] once the settings differ) and Save Preset... names the
settings as a preset. Edit > Print Presets... lists [Default] (generated,
protected) and the saved presets with how they differ from it; New... and
Edit... open the preset editor (the Print dialog's sections), Delete,
Import... and Export... use .vcprintpresets files, which File > Open also
imports. Commands print.presets.list/save/delete/import/export; the presets
live in Prefs.print_presets and persist with the preferences.
The open-dialog filter count test counts the new Print presets filter.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
The Print dialog (Ctrl/Cmd+P) edits the document's print settings in the
sections General, Marks and Bleed, Output, Graphics, Color Management,
Advanced and Summary, with a preview of each printed page under the section
list (drag the art to move its placement). It drives print.setup,
print.preview and file.print; the preview pages now carry their transform,
printed area and trim box. Print sends the job's PDF to the chosen printer
through the new PrintService (lp on macOS/Linux, the shell print verb on
Windows, a hidden frame and the browser's print dialog on the web); without
one, or with PDF File, it saves the PDF. Done only keeps the settings.
UI commands file.print, print.printers and print.printerSetup.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Save PDF > Output now applies: colours convert to a destination profile
(destination, or preserveNumbers keeping the numbers of colours already in
its model; grey stays grey; images and freeform gradient images convert
too; printer's marks don't). Profile inclusion writes ICC-based colour
spaces (CMYK with the destination's or the document's profile, RGB as sRGB,
grey), and transparency in CMYK output blends in the CMYK profile's space.
The output intent profile is embedded as the catalog's /GTS_PDFX output
intent with its condition, identifier and registry, and Trapped goes in
the document information (PDF/A keeps its own). A shared patch module
edits written PDFs (Lab spot alternates use it too).
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
