clip.unloop found loop copies only by comparing content of back-to-back
clips. As soon as the source clip's notes were edited, its content no
longer matched the copies and unloop answered "the selection is not a
looped clip" for the very loop that clip.loop had just created.
clip.loop now tags the origin and its copies with a shared `loop_id`
(new optional Clip field, serde default so old sessions load), and
unloop treats equal-length adjacent clips with the same loop_id as one
loop. The content comparison stays as a fallback for loops without a
tag. unloop with mode=flatten clears the tag so the copies become
ordinary independent clips.
Propagating edits from the source to the copies is not part of this
change.
set_meter and remove_meter now re-place every later meter event at the
bar number it started before the edit, so meter changes stay on bar
lines and bar|beat positions round-trip. Clips, notes and tempo events
keep their positions.
Fixes#250
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
midi.new_clip had no UI path, so an empty instrument/MIDI track could
never get a MIDI clip (#282). The menu bar is built from the catalog,
so the entry is added to menus::tree() and placed first in Clip.
The new test checks every mutating command is reachable from the GUI
(built menu tree, shortcut, or UI reference), with today's gaps listed.
Closes#282
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Commands that already worked but had no key get the ones Pro Tools uses,
on macOS, Windows and Linux alike (Alt is Option on macOS; Cmd is Ctrl
elsewhere):
- Shift+= and Shift+- step the Grid value to the next larger or smaller
one, and Alt+Shift+= and Alt+Shift+- the Nudge value, as the Pro Tools
Reference Guide gives them. `view.grid` and `view.nudge` take `step`.
`GridValue::stepped` walks the note values, keeping a dot or triplet, and
steps seconds, frames and samples by tens. macOS sends Alt+Shift+= as =
(the key under ±), so that arm takes = as well as +. Both commands list
the keys as descriptive shortcuts, like Nudge's Plus/Minus, so they show
wherever commands list their shortcuts; the strings don't parse, so the
registry never dispatches them and `shortcuts::fixed` handles the keys.
- Commands Focus: , and . nudge back and forward, M and / nudge by the next
larger Nudge value (`edit.nudge` takes `next`), 0 copies the Timeline
selection to the Edit selection and O the other way, [ and ] play the
Edit and Timeline selections, and Shift+Z redoes. Shift+P and Shift+;
add the track above or below the selection, keeping its range (P and ;
already move it). They run Extend Edit Up/Down, which now skip tracks
the Edit window doesn't show (hidden, or in a closed folder); before,
they could add an invisible track. Shift+; can arrive as :, so both are
matched.
- Playlists: Alt+Shift+Up and Alt+Shift+Down copy the selection to the
target playlist and to a new one, Alt+Shift+T and Alt+Shift+N move it
there, Shift+Right shows the target playlist and Cmd+Shift+Right
designates the shown one. The MIDI editor's piano roll moved notes on any
arrow key, whatever the modifiers; it now leaves Alt, Cmd and Ctrl arrows,
and Shift+Left/Right, to these shortcuts.
- F12 records, as in Pro Tools. Cmd+Space is Spotlight on macOS.
- Ctrl+Tab goes back to the previous clip boundary off macOS, where Windows,
GNOME and KDE take Alt+Tab; Pro Tools for Windows uses Ctrl+Tab too.
Cmd+Alt+Tab now toggles Tab to Transient: the Tab arm took it as Alt+Tab
and tabbed back instead.
- Windows: Alt+7 Universe, Alt+6 Clip Effects, Alt+= MIDI Event List,
Shift+K MIDI Keyboard, Cmd+Alt+J Window Configuration List, Alt+' Task
Manager, Alt+I Workspace, Alt+J Workspaces to Front.
Tests drive the keys through `shortcuts::handle` for each OS
(tests/pro_tools_keys.rs), plus the piano roll with modifier arrows held.
Unknown keys in `params` were silently dropped, so a typo like `gain_db`
reported `ok: true, set: 0` — indistinguishable from a successful no-op.
The command now fails and lists the unrecognized keys (and non-numeric
values), matching how `mix.insert` already validates its params. Preset
recall in the plugin menu drops stale keys before calling the command.
Fixes#266
write_automation merged a pass's points under one key, but the fader
driving the pass merged under its own, so each frame of a ride started
two new undo steps: one second of riding made 120, and in two seconds
everything before the pass was gone from the 200-step history. Stop's
last point was a step of its own as well, because every command,
transport.stop included, ended the gesture.
Engine::hold_merge makes every merged gesture take the held key until
it is released. While playing with a track in a write mode,
write_automation holds the pass's key, so the pass and whatever is
dragged during it are one undo step. A command now ends a gesture only
when it changes the document, so Stop no longer splits the pass it
ends.
Strip Silence rendered the whole selection at once, and a render stops
at 2^29 samples over all channels: 93 minutes of stereo at 48 kHz, 46
at 96 kHz. Everything past that read as silence, so the clips there
were deleted. A 105-minute selection on a stereo track lost its clip at
100 minutes.
It now renders at most 2^24 samples at a time, only where unmuted audio
clips play, into a streaming version of the silence detector
(`SilenceScan`, which `non_silent_ranges` now runs on). A window takes
at most 64 MB instead of up to 2 GiB, and more than a day of clips is
refused rather than scanned for minutes. `render_clips` now skips clips
outside its range before looking up their clip effects, so a track of
5,000 clips strips as fast as before. Results are unchanged on the demo
sessions and on 10 minutes of tone bursts that cross window edges.
One offline render holds MAX_RENDER_SAMPLES samples, about 93 minutes
of stereo at 48 kHz, and the offline time stretch, pitch shift and
resample stop at MAX_OFFLINE_SAMPLES frames. Longer audio was cut short
without a word: Render Clip Gain and Clip Effects Render left the end
of the clip silent, every AudioSuite process shortened the clip, the
track Commit made fell silent at the limit, and Export Clips wrote
shortened files. Above 74 kHz an hour no longer fits, so TCE, Elastic
Properties and Remove Pitch Shift padded the cut end with silence.
Each now checks the length before it renders and refuses with the
limit in seconds, as Consolidate does in #212. AudioSuite counts what
Time Stretch, Pitch Shift and Varispeed make, so a fourfold stretch is
refused at a quarter of the limit. Export Clips checks every clip
before it writes a file.
saved_audio_is_trusted_only_in_the_folder_it_was_saved_in compared path
strings. On Windows the engine reports <session folder>\Audio Files/x.wav
while the test expected <folder>/Audio Files/x.wav, so the test failed
there although the two name the same file. The expected value is now the
session folder joined with the stored relative path, on every platform.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
event.midi_track_offsets stored midi.offset.<track> but the note
scheduler never read it, so the render was unchanged. schedule_notes
now looks that many samples back into the clips, which plays the track
exactly as if its MIDI had been moved by the offset. The scheduler is
shared by offline bounce and realtime playback.
A write pass added a point every 20 ms of playback and never removed
the old points between them, so the old automation survived between
the new points and the level jumped between the two rides. A covered
window, which runs only once a second since #192, wrote one point a
second and kept almost all of the old ride.
automation.set_point takes an optional `from`, and the points between
`from` and `at` are removed first. Each point of a pass gives the
previous one, so it replaces everything since then however far apart
the passes run, and Stop writes a last point where playback stopped.
A locate or a restart while playing starts afresh, so a jump never
erases what it skipped.
The test writes over a dense old ride with passes a quarter second
apart, jumps twice and stops, then checks each stretch. Removing any
of the four changes fails it.
Setup > Current Feet+Frames Position stored its origin in
feet_frames.start but nothing read it, so every Feet+Frames reading
still counted from sample 0. format_position/parse_position now take
the origin alongside the timecode start, and Session::format_position
and Session::parse_position pass both, so the counters, rulers,
session.format_time and typed positions share one reference.
Trim to File Boundaries and Trim to Fill Selection extended a clip within
its source without looking at the clips around it, leaving two unfaded
clips over the same samples. Both now go through one helper that caps the
extension at the end of the previous clip and the start of the next one on
the same playlist, the way the other commands that grow an existing clip
do (Paste Merge MIDI, step input). An existing crossfade overlap is kept.
Consolidate clamped its range to the track's last clip end plus one
second, so on an empty track a 0-5 s selection made a 1 s clip and a
2-7 s selection made nothing. It now renders, clears and places exactly
the selection, and refuses a selection too long to render instead of
placing a shorter clip. Prepare DPE keeps the old per-track bound.
Fixes#164
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>