* Strip Silence: the sliders move a tenth as far while Ctrl or Command is held
While Ctrl (Command on a Mac) is held, a drag on one of the four Strip
Silence sliders moves the value a tenth as far as the same drag
without the key, on the slider and on its value box. Pressing or
releasing the key during a drag leaves the value where it is, and the
drag goes on from there. Releasing the mouse button leaves the value
too. A drag without the key works as before.
The new widgets::fine_slider uses the modifier test and the tenth of
widgets::fader. Threshold and Clip Start Pad show one decimal place,
and a drag on the slider during which the key was held rounds the
value to the places the box shows.
* Plugins: parameter sliders move a tenth as far while Ctrl or Command is held
While Ctrl (Command on a Mac) is held, a drag on a parameter slider in
the plugin window, the Clip Effects window or an AudioSuite plugin's
window moves the value a tenth as far as the same drag without the key,
as the Strip Silence sliders do. A logarithmic slider moves a tenth as
far along the slider, and a whole-number slider, such as the Sampler's
Root Note, stays on whole numbers. A drag without the key works as
before.
widgets::FineSlider is a new builder with the slider options these
windows use (no value box, logarithmic, whole numbers, a salt for
unlabeled sliders); widgets::fine_slider keeps its signature and calls
it.
* Plugins: Alt-click returns a parameter to its default value
An Alt-click (Option-click on a Mac) on a parameter in the plugin window,
the Clip Effects window or an AudioSuite plugin's window sets the
parameter's default value, as an Alt-click sets a fader to 0 dB. It works
on a slider, on a slider's value box and on a choice list. The click on a
value box does not open it for typing, and the click on a choice list does
not open the list. In the plugin window and the Clip Effects window the
reset runs the same command as a drag, so it is one undo step. While Alt
is held, a drag on one of these sliders leaves the value where it is.
widgets::FineSlider has a new default_value option for this.
* Plugins: FineSlider::default_value describes what a held Alt does
While Alt is held, a drag leaves the value where it is, and an Alt-click
on the value box does not open it for typing. An Alt-click on the rail
sets the default.
* Dialogs: Enter on a focused Cancel or Don't Save no longer runs OK
Enter on a focused button clicks it and also presses the dialog's OK.
In Strip Silence, Enter on Cancel closed the dialog and still stripped
the selected clips. Cancel and Escape now drop the command and the save
that OK asked for, in every dialog. In Unsaved Changes, Enter on a
focused Don't Save closes without saving instead of opening Save.
* Read send destinations only while the menu is open
* Tests: pressing Ctrl during a value-box drag keeps the value
The rest of the drag on the Threshold value box moves as far as a drag
with Ctrl held from the start.
* Bounce Mix: Cancel starts no bounce; fine adjust on more AudioSuite sliders
Enter on a focused Cancel also pressed Bounce, which started the bounce
before the Cancel check ran. The bounce now starts after that check.
The Normalize, Time Shift and Pitch Shift sliders in the AudioSuite
window move a tenth as far while Ctrl or Command is held.
* Tests: give the Enter-on-Cancel bounce test its own scratch folder
It shared bounce-cancel with cancel_or_escape_stops_a_bounce_and_leaves_no_file,
so the two tests removed each other's folder when run in parallel.
* Clip Effects: log-taper parameter sliders use a logarithmic rail
The EQ and Dynamics sliders in the Clip Effects window now follow the
parameter's taper, as the plug-in window does, so a frequency, Q, ratio,
attack or release slider moves along a logarithmic rail.
* Dialogs: leave Enter on a focused Cancel or Don't Save to its own pull request
The dialog changes for Enter on a focused Cancel or Don't Save, the
Bounce Mix change that started the bounce after the Cancel check, and
their tests in save_changes.rs, strip_silence_dialog.rs and bounce.rs
are removed from this branch. The fine adjustment on the sliders stays.
* Plugins: tests cover Alt reset and Ctrl fine adjustment on more slider kinds
Tests now cover Ctrl without Command, Alt pressed during a drag, one
undo step for a choice-list reset, whole-number and logarithmic sliders,
Alt-click and Ctrl-drag on the AudioSuite and Clip Effects value boxes,
and Alt on a Strip Silence slider, which behaves like a plain click or
drag.
The ROADMAP entry limits the choice-list reset to the plugin window, and
the docs/ui-parity.md fine-adjustment row names the Clip Effects and
AudioSuite sliders.
* Plugins: a short Ctrl-drag at the low end of a log slider with a value box moves the value
A fine drag rounded to at most three decimal places, so a one-point
drag near the bottom of a range such as Attack at 0.01 ms rounded back
to where it started. The rounding now allows up to six places.
* Strip Silence: the fine slider's response reports each change of a drag
The value moved by a drag that the key has touched is set before the
slider reads it, so the Response's changed() stayed false on those
passes. fine_slider now marks the response when the value changed.
Tests: a Control-only drag, and changed() on every pass of a Ctrl-drag.
The value box test releases the button once and checks the value after.
* Tests: plugin sliders with Control alone and with Ctrl toggled during a drag
The plugin window's logarithmic and whole-number sliders keep their value
when Ctrl is pressed or released during a drag, and a drag with Control
alone is fine. The tenth-as-far test names the parameters it drags and
checks the others do not change, and the low-end test checks the value
after the release.
* ui: keep SoundCraft's beside-the-session-view place for panels craft-ui has no record of
* ui: Tracks and Groups and Clips in full-height dock columns
The Edit window docks Tracks and Groups (168 pt) at its start edge and Clips
(230 pt) at its end edge, with the MIDI editor under the session view between
them; Mix docks Tracks and Groups at its start edge. Panels dragged to an
empty window edge make a dock there.
Saved preferences and window configurations carry docking_version. Split-frame
layouts saved without it load as the new defaults, keeping every other
setting. A list with no recorded place reopens in its dock group, making the
dock again at its side and width when it is gone.
Pins craft-ui, craft-docpath and craft-media to craft-libs#312.
* Pin craft-libs at d24e4bc for the Mac round 3
* ui: test that a floating list reopens floating while its dock is shown; ui-parity revision
Cancel Zoom Toggle (view.zoom_toggle_cancel, Alt+Shift+E, Option+Shift+E
on a Mac) turns Zoom Toggle off without going back to the view it
stored: the zoom, the horizontal and vertical scroll and the track
heights stay as they are. An Alt-click (Option-click) on the Zoom Toggle
button runs the same command. The next Zoom Toggle zooms in from the
current view and goes back to it.
When the command runs, from a key, the button or the control channel,
the Edit window clears the vertical scroll position that Zoom Toggle
would restore.
Picking a plugin for an insert slot added it but opened nothing, so
every new plugin took an extra click on its slot. As in other DAWs, the
pick now opens it: a hosted plugin's own editor, else its plugin
window (built-in plugins, no audio engine, or an editor that can't open
here, such as CLAP plugins with only an embedded editor on macOS).
The insert menu's picks go through pick_insert, which remembers the
slot when mix.insert succeeds; SoundApp::open_inserted opens it on the
next logic pass, once the audio engine has the instance. Only the menu
opens it, so mix.insert from the CLI, MCP or control channel still
opens nothing. It covers empty and filled slots, in the Mix window and
the Edit window's Inserts column.
Tests: tests/open_on_insert.rs (empty slot, search and Enter,
replacing, Edit window column). menu_search closes the windows the
picks now open before it looks for the menu's Bypass.
Press a checkbox and drag over its neighbours: each box the pointer
passes takes the state the first one switched to, until the button is
released. A click toggles one box, as before. Same design as VectorCraft
and PhotoCraft.
widgets::checkbox wraps egui's checkbox and adds the drag; every
ui.checkbox call in ui-egui uses it. Only boxes the pointer can see are
set, so rows scrolled out of a list or under another window stay as
they are.
Tests: widgets::tests (drag sets, drag unchecks and stops at release,
hidden rows untouched, a click toggles one) and tests/group_dialog.rs
(dragging down the Group dialog's track list groups every track).
* Progress docs to the craftrules standard; full re-measure against Pro Tools 2026.4.1
Stage: alpha. Menu breadth 482/512 (94.1%, measured), feature breadth ~70%,
ready for real work ~40%; ~350-570 agent-hours to beta, ~950-1,450 to full parity,
calibrated on this repo's PR history.
- ROADMAP.md rewritten: stage banner, two numbers, dimension/feature/language tables
- docs/target-app-parity.md: authoritative assessment (area table moved from ROADMAP)
- docs/gaps.md: 22 ranked gaps with evidence and estimates
- docs/roadmap.md: milestones, current focus, beta plan
- docs/ui-, file-format-, hardware-, plugin-, localization-parity.md: new checklists
- docs/parity.md -> docs/parity-checklist.md (generated by cargo xtask parity)
- architecture.md: video, vst3-host, au-host crates; device I/O limits
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Stage: pre-alpha under the core-workflow gate
Add the alpha gate to docs/roadmap.md: interface recording at a chosen buffer
size, MIDI recording, and session interchange with Pro Tools fail, so the stage
moves from alpha to pre-alpha (~5 points and ~110-180 agent-hours to alpha).
Mark the alpha blockers in docs/gaps.md; update ROADMAP.md, target-app-parity.md
and README.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Add mainstream-practitioner and essentials-user readiness numbers
Mainstream practitioner ~36% (weekly-area depth 50.6% x 0.90 interaction x 0.92
stability x 0.85 file exchange) and essentials user ~57% (core-feature depth
72.4% x 0.90 launch/stability x 0.90 discoverability x 0.97 files), with written
weights, discounts and GitHub user evidence. Full ready-for-real-work checked
against its written dimension weights (40.6%); unchanged at ~40%, stage unchanged.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Readiness by audience: hours to ~95% for full, mainstream and essentials
Full ~40% / 950-1,450 h, mainstream ~36% / 380-600 h, essentials ~57% / 110-200 h,
calibrated on this repo's PR history. The full number is already an additive
weighted sum over the written dimension table; method unchanged.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>