- Replace whole-region Vec<f32> read_region/write_region in CutParts::new
with tile-parallel cut_piece + try_fill_surface/try_clear_surface,
sharing interior Arc<Tile> allocations in O(1) and activating the
solid_tile hole-fill fast path on Background and mask targets.
- Cache piece_bounds on CutParts so CutParts::place avoids scanning tile
content bounds on every drag frame.
- Parallelize composite_over across top tiles with Rayon and share fully
opaque top tiles by Arc<Tile> clone in O(1), preserving COW tile
identity for GPU canvas uploads.
- Parallelize Surface::translated across target tiles with Rayon and
prune cleared tiles in-place inside edit_tiles.
- Skip zero-offset floating preview generation on pointer-down in
move_ui::floating_doc.
- Exclude SnapKind::Selection when moving selected pixels with the Move
tool so small initial drags do not snap back to (0, 0).
- Keep navigator_plain active during Move/Brush/Patch drags on a GPU
canvas so navigator_gpu is not evicted into a synchronous full-document
CPU thumbnail composite on the first drag frame.
- Parallelize row normalization in compose::render_reduced_in_bands and
add a direct read_rgba_into fast path for unmasked Normal layers over
an empty backdrop.
Look in from each edge through strips that double in thickness, so a subtracted
or intersected subpath's empty margin costs a few renders instead of one per row.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
A soft shape's transform frame, snap rectangle and Properties X/Y/W/H came from
the path plus the full stroke width on every side, so a centred or inside stroke
grew the frame when Density or Feather was set. The frame is now the pixels the
same shape renders at full Density without Feather (edge strips only, clipped to
the canvas), identical to the hard shape's for every stroke alignment.
feather_matches_photoshops_ramp now enforces the 1-level claim the scorecard
makes (measured max deviation 1 at 8, 16 and 32 bit).
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
docs/file-format-parity.md: main added three 2026-10-15 revision rows
(DDS save, PNG sTER, PSD guides) where the PR added its own; keep all four.
Co-authored-by: varanus-salvator <262257003+varanus-salvator@users.noreply.github.com>
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Reuse tile scratch and tone tables across rendering work. Skip fully masked
adjustments and identity float curves. Previous-path tests preserve output
across sample depths, masks and clipping.
A Gradient Overlay (and gradient strokes, linked patterns, linked bevel
textures) is laid out over the layer's bounds. Painting grows those
bounds, but the stroke commands reported only the stroke as damage, and
the canvas's committed-stroke path repainted only what the live stroke
had not shown. The canvas therefore kept the old gradient around earlier
strokes: one gradient per stroke instead of one over the whole layer.
Session dispatch now grows a command's reported damage by
photocraft_compose::relayout_damage(before, after): the whole composite
of any visible layer whose effects span its frame, when that frame moved.
The canvas adds the same area to a committed live stroke. Strokes inside
the existing bounds and frame-independent effects keep tight damage.
Co-authored-by: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
`bake` rendered each layer through `render_layer`, which has no document context (default Global
Light, no patterns, the render rect as canvas). It now uses the new doc-aware `render_layer_in`.
Co-authored-by: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
A pass-through group that is the base of a clipping group renders isolated while it holds a
visible adjustment (`clip_base_adjusts`), so showing, hiding, adding or removing a clipped
adjustment inside it can switch the group's other children (a Multiply layer beside the base)
between isolated and pass-through rendering. `change_bounds_in` now takes the list holding the
parent group and reports that group's change bounds in this case; `layers_damage`, `step_damage`
and `one_sided_bounds` pass it.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Parallel bands each collected their finished tiles until the band's last
one was done, so with work stealing many bands could hold most of their
tiles at once, close to a second copy of the output. Each tile is now put
into its band behind a lock as soon as it is rendered; only the tiles in
flight are held, as before the bands ran in parallel.
The compositor draws a clipped adjustment that has no unclipped layer
beneath it as an ordinary adjustment, but change_bounds counted it as
contained in a pass-through group. Hiding the layer clipped to such a
group (which ends its isolation) or the group itself then recomposited
only the group's pixels and left the rest of the canvas stale.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
A pixel layer with nothing clipped to it is read from its tiles a row at a
time and blended straight onto the backdrop, instead of being copied into a
tile-sized buffer first (a megabyte per layer per 256² render tile). Normal
RGB rows go through a branch-free kernel over blocks of 8 pixels that the
compiler vectorizes; few-band renders also run their bands in parallel.
Bit for bit the same: the row kernel is tested against the scalar loop (NaN,
infinities, subnormals, signed zeros), the row path against the tile copy at
8/16/32-bit with every kind of mode, fill and mask, and the whole GPU parity
suite's CPU references (1620 renders) are unchanged.
P60 on the CPU compositor: 627 -> 530 ms (the render without effects
300 -> 199 ms).
`photocraft_compose::change_bounds` returned "anywhere" for every
adjustment layer before looking at `clipped`, although a clipped
adjustment only changes its clip base's pixels. Hiding or showing one
(or undoing that) therefore recomposited the whole canvas, which on a
heavy document fails the GPU memory fit check and falls back to a full
CPU redraw taking seconds to minutes.
`change_bounds` sees one layer and cannot find the base, so a new
`change_bounds_in(layers, k, canvas)` looks at the sibling list: a
clipped adjustment's change bounds are its base's change bounds. It
stays `None` (anywhere) when no unclipped base lies beneath it (the
compositor then draws it as an ordinary adjustment), when the base is
an adjustment (layers clipped to it composite atop the adjusted
backdrop), and, through `change_bounds`, when the base is a
pass-through group holding an adjustment (visible clipped layers make
that group isolated, so they decide whether its adjustment reaches the
layers beneath) or draws outside its bounds. The engine's
`layers_damage`, `step_damage` and `one_sided_bounds` use it.
Tests: a compose unit test that the clipped adjustment's bounds equal
the base's, that every pixel the toggle changes lies inside them, and
the cases that stay unbounded; an engine test that hide, undo, redo,
show and `layer.setProps` visible report the base's rect (top level and
inside a group), and that recompositing only that rect over the
previous canvas equals a full recomposite.
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
A shape below 100 % Density renders over the whole canvas, and a Feather
grows its pixels, so Free Transform, the Move tool's transform controls,
snapping and Properties > Transform framed the canvas or the blur. As in
Photoshop the frame now follows the path and stroke whatever the mask
Density and Feather: photocraft_compose::hard_shape_bounds (shape_bounds
without the soft reach) feeds whole_layer_bounds and the Properties
Transform fields. Rendering keeps the soft bounds; other layers and hard
shapes are unchanged.
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
Keep effect-identity memo lookup, pure hashing and insertion atomic across concurrent render callers. Preserve existing identities and add a contention regression with eight synchronized callers.
- the bevel program asks for both fields with B::bevel_fields, so they always come with the
same reach;
- field and bevel_fields share one windowing (fields_in_windows: one window, or bands on wasm),
so wasm pairs them per band instead of taking a separate path;
- compose's bevel_height and bevel_distance_fields share bevel_dists;
- sync_fx recomputes the pair together and returns Unsupported when the two are not over the
same rectangle at the same reach, instead of falling back to one at a time.
Test: paired_bevel_fields_equal_the_fields_one_at_a_time also checks the banded path.
On the GPU canvas a bevel size change recomputes BevelInside and BevelOutside on the CPU, one
distance_field call each, and each call ran sharp_edges (edge pixels and refined normals) on the
same window again; the CPU compositor already shares them (bevel_height). sharp_edges was ~17% of
the CPU time of those size changes.
When both fields are recomputed over the same rectangle at the same reach (a size change, a new
shape), sync_fx now computes them together: compose::effects::bevel_distance_fields finds the
sharp edges once and returns both. Same window, same functions, so both fields are bit for bit
the ones computed one at a time; the chamfer fields, wasm and a single bevel field keep the old
path.
Test: paired_bevel_fields_equal_the_fields_one_at_a_time (reach 3, 9, 40; whole region and two
parts; bit-equal to field() of each kind).
A chisel bevel size change rebuilds the bevel maps of the whole layer region. The distance
fields already run on threads (#2119), but the passes after them still ran on one thread over
every pixel: the chisel height from the two distances, the texture term, the highlight/shadow
shading (once, or twice for emboss styles) and the emboss inside/outside mix.
Each of these computes a pixel from its own inputs only (the height map, the shape, the
distances), so they now go row by row through par_units / par_fill like the fields: the same
arithmetic in the same order per pixel, so the maps are bit for bit the old ones whatever the
thread count. Maps under 65536 pixels and wasm stay on the calling thread.
Test: bevel_maps_do_not_depend_on_the_threads (4 shapes x 5 styles x 3 techniques, with soften
and a texture, 1 vs 2, 5 and 16 threads, every map bit-equal).
Photoshop stores Stroke › Overprint as `overprint` in the FrFX
descriptor. StrokeFx had no field for it, so an edited stroke was
written back without it and a stroke with Overprint on lost it.
Add `StrokeFx::overprint` (serde default, so older .pcraft files load),
read and write `overprint`, accept it in layer.layerStyle.stroke and show
the Overprint checkbox in the Layer Style dialog, as Photoshop does.
Rendering is unchanged.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Photoshop stores Bevel & Emboss › Gloss Contour › Anti-aliased as
`antialiasGloss` in the effect descriptor. The document model had no
field for it, so import dropped it and export regenerated the bevel
without it: once a bevel was edited (the Layer Style dialog re-applies
all its settings), a saved PSD reopened in Photoshop with the gloss
contour aliased.
Add `Bevel::gloss_anti_alias` (serde default, so older .pcraft files
load), read and write `antialiasGloss`, accept `glossAntiAlias` in
layer.layerStyle.bevelEmboss and show the Anti-aliased checkbox next to
the Gloss Contour in the dialog, as Photoshop does. Rendering is
unchanged: contour anti-aliasing is not rendered for any effect yet.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* TIFF: read and write CIE L*a*b* (CIELab, ICCLab); Lab documents stay Lab
Photoshop saves Lab documents as CIELab TIFFs (PhotometricInterpretation
8, a* and b* signed), which PhotoCraft could not open, and PhotoCraft
saved Lab documents as sRGB TIFFs.
- codecs: a Lab channel layout (Lab, LabA) holding a* and b* as
PhotoCraft's Lab documents do ((a + 128) / 255; 16 bits like the PSD
importer), with its own Lab <-> sRGB conversion (same formulas as
photocraft-color; codecs stays standalone) for formats without Lab,
which now warn LabConverted.
- TIFF read: CIELab and ICCLab (8 and 16 bits, alpha) are handed to the
tiff crate as RGB and labelled Lab; a* and b* are converted from the
file's encoding (signed a / 256a, or offset).
- TIFF write: Lab and LabA as CIELab, as Photoshop writes it; float Lab
is written with 16 bits (DepthReduced).
- io: a Lab TIFF opens as a Lab document; a Lab document with one plain
layer is written to TIFF in Lab (other formats still use sRGB).
Photoshop 2025's Lab TIFFs open with the colours Photoshop shows (its
own RGB conversion matches within one level at 8 bits and exactly at 16
bits), and Photoshop reads PhotoCraft's Lab TIFFs back with the same
L*a*b* values.
Fixes#4936
* PSD: a smart object's filter mask shows when the file opens
Photoshop stores a smart object's layer pixels with its filters applied
but not its filter mask. When it composites, it mixes the unfiltered
pixels (cached in FEid) back in through the mask. We showed the stored
pixels as they were, so a PSD whose smart filter has a mask opened with
the filter everywhere. Only after something re-rendered the smart object
did the mask appear, because our re-render mixes it.
- compose::filter_mask holds the mix, moved from the engine, and its
inverse.
- Import decodes the unfiltered pixels from FEid
(smart_map::unfiltered_from_item) and keeps the mixed result as the
smart object's pixels, as the engine's re-render does.
- Export writes the layer record the way Photoshop does: unmixed with
the unfiltered pixels it writes (or keeps) in FEid, so Photoshop mixes
back to what the document showed. Transparent pixels stay empty.
Photoshop oracles: sf-filter-mask-hard, sf-filter-mask-gradient and
sf-stack-blend-and-mask pass (145 -> 148 of 258); floor 145 -> 148.
psd-tools and io corpora unchanged.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* DNG: decode lossy (JPEG-compressed) DNG tiles (FILE-215-11)
DNG 1.4 lossy JPEG (compression 34892) stores each tile or strip as a
baseline-DCT JPEG of 8-bit samples: a gray stream for CFA data, a YCbCr
stream for three-sample LinearRaw. The decoder arm from #2021 read the
streams but widened every sample by 257, so the values no longer matched
the file's levels: an 8-bit WhiteLevel (or its default, 255) clipped
everything to white and a 256-entry LinearizationTable was indexed past
its end. It also required the JPEG frame to match the clipped row count,
which rejected the padded edge tiles real tiled files carry.
The arm is now `lossy_jpeg()` in sensor.rs. The decoded 8-bit values are
the stored samples, and BlackLevel, WhiteLevel (default 255 for 8-bit
data) and the LinearizationTable apply to them exactly as for every other
compression. A tile may be coded at the full tile size (edge tiles padded,
as the spec says) or at the image's row count; a strip at its row count;
the width must be the segment's. BitsPerSample must be 8 and the JPEG's
component count must equal SamplesPerPixel (1 or 3); anything else is an
error, never a silent conversion. The frame header is checked before any
pixel is decoded and the JPEG decoder's own size cap is the segment the
IFD declares (already charged against the limits), so a hostile SOF cannot
size a buffer past the tile.
testgen writes true 8-bit lossy fixtures (`LossyJpegTiles`, and strips via
the new `LossyJpegStrips`), accepts pre-encoded `lossy_segments` for
hostile-input tests, exposes `baseline_jpeg()`, and leaves WhiteLevel out
when `white` is 0. The DNG tests cover CFA and LinearRaw RGB from tiles
and strips at 37x23 (partial edge tiles, a short last strip), the default
white level, black/white scaling and a LinearizationTable against the
uncompressed path, and hostile inputs: a truncated tile, frame-size and
component-count mismatches, a 65535x65535 SOF under default and tight
limits, a tile over the allocation budget, and 12/16-bit or 4-sample
files. The hostile mutation set gains a lossy CFA and a lossy LinearRaw
file. The parity doc's DNG row is updated; the scorecard row is left for
the coordinating branch.
* Raw: measure the Nikon D90 image area (4288x2848 at (10, 10))
Aligning the decoded D90 sensor plane with the camera's own JPEG puts the
image at (10, 10) in the 4352x2868 sensor plane, giving the camera's
4288x2848 frame (10-pixel margins; the right border reads the camera's flat
255 from column 4310). Add the measured ImageArea so a D90 NEF opens on the
camera's frame instead of the uncropped plane, and make a measured profile
leave a file that carries its own colour calibration (a DNG) untouched.
* Codecs: open Cineon (.cin) film frames read-only
Cineon is the 10-bit logarithmic film-scan format DPX grew from. Read it from
the same Kodak header family: the generic header (big-endian, orientation at
192, channel count at 193, the channel-1 bits/dimensions), one or three
channels, three 10-bit samples packed into each 32-bit word on a word
boundary. The 10-bit code values open as U16 (round(c x 65535 / 1023)); the
file's log black/white points are a display choice and are not applied. A
depth other than 10 bits or a channel count other than 1/3 is Unsupported;
truncation errors rather than panicking. Read-only (no Cineon writer), so
.cin joins the open filters and Cineon read closes part of #1049's G10 gap.
* Vector: bound flattening memory, keep over-budget dashes, cheaper edge build (#5195)
- flatten: a path's flattened points are capped at 1 << 20; past it every
curve keeps a proportional share of its pieces (at least one), so hostile
handles from files (vmsk, SVG, effect outlines) cannot exhaust memory.
fill_rasterizer flattens the whole path under one budget.
- stroke: past the dash step budget (or below coordinate precision),
dash_polyline keeps the dashes made so far and draws the rest solid
instead of dropping the stroke. Open polylines are no longer copied.
- raster: coordinates are clamped to +-1e15 and edges with a non-finite
slope (vanishingly short) are skipped, so huge finite coordinates no
longer produce NaN coverage. fill_rasterizer sorts edges once instead of
after every component (stable sort, identical order).
- Cleanups: dead miter `half`, dead loop-length check in trace_mask,
shared mask render body, map_knots helper, shared straight-segment test.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* PSD: cap pattern memory across a parse, reject mixed-depth pattern channels (#5198)
- Patterns: one PatternBudget (decoded bytes + zero padding) is shared by
every pattern of a block, a .pat file and the pattern blocks of one
document; .abr patt sections are charged to the samples' budget.
- Patterns: a channel whose depth differs from the first is rejected (the
parsed pattern could not be written back).
- Slices: descriptor numbers no longer wrap; out-of-range ids are no id,
coordinates clamp to i32, and a v6 trailing entry without a usable id
attaches its outsets to no slice.
- LayerInfo::unpadded_len is computed from field sizes instead of
serializing every record into a scratch buffer.
- abr desc presets are moved out instead of cloned; UnFl and shmd counts
use the bounded preallocation; ImageData::decode_channel (decoded every
plane to return one, unused outside its test) is removed.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Vector: bound stroke outline points (#5211)
- stroke_polygons dashes all lines first, then counts round caps and
joins. When their full-resolution tessellation would exceed 1 << 20
outline points, every round cap and join gets the same smaller segment
count (down to 4 per circle, 1 per join; area-exact radius kept).
Strokes under the budget are unchanged; no piece is dropped.
- The dash step budget (100000) is now shared by all lines of a stroke
instead of per polyline, so many subpaths cannot multiply the dash
(and cap) count. Past it the rest is drawn solid, as before.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* PSD: write tiff blocks without copies, inflate merged ZIP once
- ImageSourceData::to_bytes writes the global mask and global blocks
straight from the model with 4-byte alignment instead of cloning each
block (data included) to set its padding. Same bytes.
- The tiff transcoder's nested regions and blocks write into the parent's
buffer (taken and handed back, error or not) instead of building their
own output and copying it up per nesting level. Bodies that fail or are
not transcoded are truncated before being copied as stored or dropped.
Same bytes.
- PsdFile::from_bytes_and_merged decodes the merged image with the parse
when asked: a ZIP stream is inflated once (the decode's stream check is
the parse's); the parse-only check runs only when the decode fails, to
keep from_bytes' errors. PSD import uses it with merged_needed.
- PsdBuilder::composite documents that Gray/CMYK composites stay straight.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Content-Aware Fill: measure a thin hole by its thickness, not its bounds (#1366)
Removing long, thin objects (coiled guitar strings, wires) left their
outline as darker and lighter blotches and copied pieces of other strings
into the fill. The pyramid shrank until the hole's bounding box was four
patches across: for a string across the image that is a level where the
hole has swallowed its surroundings, so the matches found there copy
whatever looks like the blur, and the finer levels (refine-only for wide
bounds) keep them.
A hole at most a quarter as thick as its bounds are long now counts as
thin: the pyramid stops while it is still about two patches thick, and
that level starts from a membrane across it (over a few pixels, the
surroundings themselves) instead of the onion peel, whose exhaustive
search is what made a shallow pyramid unaffordable. Compact holes are
unchanged bit for bit.
Refs #1366
* perf(compose,gpu): effect caches reserve tile addresses instead of pinning layers
Effect map cache entries kept a clone of their layer (a deep clone for groups) so the tile addresses the cache key hashes couldn't be reused. That kept an edited or deleted layer's pixels alive, uncounted, until the entry was evicted. Keep a Weak to each hashed tile instead: it reserves the address without keeping the pixels. The GPU compositor's styled-group pins and shape-source tile snapshots do the same. Part of #4530.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* fix(history): count snapshot-only tiles against the history budget
History panel snapshots outlived every budget: a Merged Layers snapshot is a full flattened copy that neither the history budget, the GPU budget's document bytes nor Purge accounted for. Trim now counts the tiles only snapshots hold as fixed cost, the GPU budget includes them, and Purge > Histories no longer reports tiles a kept snapshot still holds as freed. Part of #4530.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Content-Aware Fill: every part of a thin selection keeps its surroundings (#1366)
Two more causes of ghosts when removing strings and the small knobs
selected with them:
* Auto sampling summarises the selection's surroundings by a few
clusters. Around a long selection those come from the strings'
surroundings, so a small part elsewhere (a tuning knob in a differently
coloured corner) lost its own surroundings and was filled from far away
in another colour. Around a thin selection the Auto area now always
reaches as far as the selection is thick.
* The membrane that starts a thin hole now starts a patch radius out, past
the anti-aliased fringe or halo that a selection drawn close to the
object leaves outside it.
Refs #1366
* Content-Aware Fill: peel a thin hole where that stays affordable (#1366)
Starting every thin hole from a membrane smoothed Spot Healing on film
grain (spot_healing_keeps_film_grain_through_overlapping_strokes: grain
9.0 against 12.1 around). The onion peel copies the grain; it was only
given up because its exhaustive search is too slow on the big level a
long thin hole stops at. It now starts the thin hole whenever hole cells
times sources stay within 2^28 comparisons, and the membrane only beyond.
Refs #1366
* Select Subject: keep subject parts coloured like the backdrop, leave enclosed gaps open
Users on #2788 reported Select Subject dropping clothes that are close in
colour to a plain wall and bridging the gap between an arm and the torso.
Both come from the same place: the saliency pass labels low-contrast parts
of the subject as background, the background colour model then learns
them and explains them away, and the final blind hole fill closes every
enclosed gap up to 5 % of the mask.
Two changes in crates/algo:
- A second GrabCut pass whose background model only knows the backdrop. A
colour model fitted to the image frame (minus a margin around the
salient blob, in case the subject runs out of the picture) marks every
pixel it explains as probable background; the blob and whatever the
backdrop cannot account for start as probable foreground. Only
components that touch the first pass's result survive.
- Hole filling that consults the colour models: specks (<= 0.2 % of the
mask) always fill, larger holes up to 5 % fill only when their pixels
fit the foreground model better than the background's.
Tests: two regressions (a cream-shouldered figure on a near-white wall
keeps its shoulders; a ring keeps its backdrop-coloured hole open), plus
ignored timing and picture-dump helpers. The 6 MP first run goes from
about 100 ms to about 200 ms on one core; the P29 repeat path is untouched.
* Keyboard shortcut sets: Set menu, New Set, Save, Delete, .kys Export and Summarize (K2)
Edit › Keyboard Shortcuts gets Photoshop's set management. A set is a saved copy of the
bindings (Preferences.shortcutSets, the one in use in shortcutSet; "" is PhotoCraft Defaults),
and the Set menu shows "(modified)" when the bindings differ from it. New Set…, Save and
Delete wait for OK like the rest of the dialog. Export… writes the dialog's bindings as a .kys
file (commands then tools, Photoshop's macOS key spelling), each row carrying our id as pc-id
so PhotoCraft imports its own sets back exactly, whatever the label; Summarize… writes
Photoshop's HTML list of every bound command by menu.
edit.keyboardShortcuts takes useSet (before the call's edits), saveSet, deleteSet, sets and
activeSet (after them), exportKys and summarize; every reply reports the sets, the set in use
and whether it is modified. Bad names, keys or counts are errors that change nothing.
* .kys import: tool keys and sets saved on Windows (K3)
Photoshop's <tool> rows now import: each matches our tool by name (our tool names are
Photoshop's) or by pc-id in sets PhotoCraft exported, and a letter other than the tool's own
becomes its override, while its own letter keeps the tool cycling with the others (#5036).
A set saved on Windows spells the primary modifier Ctrl where a Mac set writes Cmd and keeps
Control for the Control key. A set with no Cmd or Opt anywhere but some Ctrl is read as a
Windows set, its Ctrl as our Cmd: Ctrl+L is the Cmd+L default, not a Control-key override that
would also mean Control on a Mac. The import reports `windows`.
* cargo fmt the extension lists
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Gert Pellin <gert@pellin.be>
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
Co-authored-by: Fabio Lissi <fabio.lissi@gmail.com>
Co-authored-by: Vikram Bhaskaran <vikram.bhaskaran@outlook.com>
Co-authored-by: vangel76 <vangel1976@googlemail.com>
Co-authored-by: Finn Newick <finnnk@gmail.com>
Co-authored-by: Brandon Thomas <echelon@gmail.com>
Co-authored-by: Diego Chagas <drochachagas@gmail.com>
Co-authored-by: Tanish Manku <tmanku.dev@gmail.com>
* Raw: measure the Nikon D90 image area (4288x2848 at (10, 10))
Aligning the decoded D90 sensor plane with the camera's own JPEG puts the
image at (10, 10) in the 4352x2868 sensor plane, giving the camera's
4288x2848 frame (10-pixel margins; the right border reads the camera's flat
255 from column 4310). Add the measured ImageArea so a D90 NEF opens on the
camera's frame instead of the uncropped plane, and make a measured profile
leave a file that carries its own colour calibration (a DNG) untouched.
* Codecs: open Cineon (.cin) film frames read-only
Cineon is the 10-bit logarithmic film-scan format DPX grew from. Read it from
the same Kodak header family: the generic header (big-endian, orientation at
192, channel count at 193, the channel-1 bits/dimensions), one or three
channels, three 10-bit samples packed into each 32-bit word on a word
boundary. The 10-bit code values open as U16 (round(c x 65535 / 1023)); the
file's log black/white points are a display choice and are not applied. A
depth other than 10 bits or a channel count other than 1/3 is Unsupported;
truncation errors rather than panicking. Read-only (no Cineon writer), so
.cin joins the open filters and Cineon read closes part of #1049's G10 gap.
* PSD: write tiff blocks without copies, inflate merged ZIP once
- ImageSourceData::to_bytes writes the global mask and global blocks
straight from the model with 4-byte alignment instead of cloning each
block (data included) to set its padding. Same bytes.
- The tiff transcoder's nested regions and blocks write into the parent's
buffer (taken and handed back, error or not) instead of building their
own output and copying it up per nesting level. Bodies that fail or are
not transcoded are truncated before being copied as stored or dropped.
Same bytes.
- PsdFile::from_bytes_and_merged decodes the merged image with the parse
when asked: a ZIP stream is inflated once (the decode's stream check is
the parse's); the parse-only check runs only when the decode fails, to
keep from_bytes' errors. PSD import uses it with merged_needed.
- PsdBuilder::composite documents that Gray/CMYK composites stay straight.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Content-Aware Fill: measure a thin hole by its thickness, not its bounds (#1366)
Removing long, thin objects (coiled guitar strings, wires) left their
outline as darker and lighter blotches and copied pieces of other strings
into the fill. The pyramid shrank until the hole's bounding box was four
patches across: for a string across the image that is a level where the
hole has swallowed its surroundings, so the matches found there copy
whatever looks like the blur, and the finer levels (refine-only for wide
bounds) keep them.
A hole at most a quarter as thick as its bounds are long now counts as
thin: the pyramid stops while it is still about two patches thick, and
that level starts from a membrane across it (over a few pixels, the
surroundings themselves) instead of the onion peel, whose exhaustive
search is what made a shallow pyramid unaffordable. Compact holes are
unchanged bit for bit.
Refs #1366
* perf(compose,gpu): effect caches reserve tile addresses instead of pinning layers
Effect map cache entries kept a clone of their layer (a deep clone for groups) so the tile addresses the cache key hashes couldn't be reused. That kept an edited or deleted layer's pixels alive, uncounted, until the entry was evicted. Keep a Weak to each hashed tile instead: it reserves the address without keeping the pixels. The GPU compositor's styled-group pins and shape-source tile snapshots do the same. Part of #4530.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* fix(history): count snapshot-only tiles against the history budget
History panel snapshots outlived every budget: a Merged Layers snapshot is a full flattened copy that neither the history budget, the GPU budget's document bytes nor Purge accounted for. Trim now counts the tiles only snapshots hold as fixed cost, the GPU budget includes them, and Purge > Histories no longer reports tiles a kept snapshot still holds as freed. Part of #4530.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Content-Aware Fill: every part of a thin selection keeps its surroundings (#1366)
Two more causes of ghosts when removing strings and the small knobs
selected with them:
* Auto sampling summarises the selection's surroundings by a few
clusters. Around a long selection those come from the strings'
surroundings, so a small part elsewhere (a tuning knob in a differently
coloured corner) lost its own surroundings and was filled from far away
in another colour. Around a thin selection the Auto area now always
reaches as far as the selection is thick.
* The membrane that starts a thin hole now starts a patch radius out, past
the anti-aliased fringe or halo that a selection drawn close to the
object leaves outside it.
Refs #1366
* Content-Aware Fill: peel a thin hole where that stays affordable (#1366)
Starting every thin hole from a membrane smoothed Spot Healing on film
grain (spot_healing_keeps_film_grain_through_overlapping_strokes: grain
9.0 against 12.1 around). The onion peel copies the grain; it was only
given up because its exhaustive search is too slow on the big level a
long thin hole stops at. It now starts the thin hole whenever hole cells
times sources stay within 2^28 comparisons, and the membrane only beyond.
Refs #1366
* Select Subject: keep subject parts coloured like the backdrop, leave enclosed gaps open
Users on #2788 reported Select Subject dropping clothes that are close in
colour to a plain wall and bridging the gap between an arm and the torso.
Both come from the same place: the saliency pass labels low-contrast parts
of the subject as background, the background colour model then learns
them and explains them away, and the final blind hole fill closes every
enclosed gap up to 5 % of the mask.
Two changes in crates/algo:
- A second GrabCut pass whose background model only knows the backdrop. A
colour model fitted to the image frame (minus a margin around the
salient blob, in case the subject runs out of the picture) marks every
pixel it explains as probable background; the blob and whatever the
backdrop cannot account for start as probable foreground. Only
components that touch the first pass's result survive.
- Hole filling that consults the colour models: specks (<= 0.2 % of the
mask) always fill, larger holes up to 5 % fill only when their pixels
fit the foreground model better than the background's.
Tests: two regressions (a cream-shouldered figure on a near-white wall
keeps its shoulders; a ring keeps its backdrop-coloured hole open), plus
ignored timing and picture-dump helpers. The 6 MP first run goes from
about 100 ms to about 200 ms on one core; the P29 repeat path is untouched.
* Keyboard shortcut sets: Set menu, New Set, Save, Delete, .kys Export and Summarize (K2)
Edit › Keyboard Shortcuts gets Photoshop's set management. A set is a saved copy of the
bindings (Preferences.shortcutSets, the one in use in shortcutSet; "" is PhotoCraft Defaults),
and the Set menu shows "(modified)" when the bindings differ from it. New Set…, Save and
Delete wait for OK like the rest of the dialog. Export… writes the dialog's bindings as a .kys
file (commands then tools, Photoshop's macOS key spelling), each row carrying our id as pc-id
so PhotoCraft imports its own sets back exactly, whatever the label; Summarize… writes
Photoshop's HTML list of every bound command by menu.
edit.keyboardShortcuts takes useSet (before the call's edits), saveSet, deleteSet, sets and
activeSet (after them), exportKys and summarize; every reply reports the sets, the set in use
and whether it is modified. Bad names, keys or counts are errors that change nothing.
* .kys import: tool keys and sets saved on Windows (K3)
Photoshop's <tool> rows now import: each matches our tool by name (our tool names are
Photoshop's) or by pc-id in sets PhotoCraft exported, and a letter other than the tool's own
becomes its override, while its own letter keeps the tool cycling with the others (#5036).
A set saved on Windows spells the primary modifier Ctrl where a Mac set writes Cmd and keeps
Control for the Control key. A set with no Cmd or Opt anywhere but some Ctrl is read as a
Windows set, its Ctrl as our Cmd: Ctrl+L is the Cmd+L default, not a Control-key override that
would also mean Control on a Mac. The import reports `windows`.
* cargo fmt the extension lists
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Vikram Bhaskaran <vikram.bhaskaran@outlook.com>
Co-authored-by: vangel76 <vangel1976@googlemail.com>
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
Co-authored-by: Gert Pellin <gert@pellin.be>
Co-authored-by: Brandon Thomas <echelon@gmail.com>
Co-authored-by: Diego Chagas <drochachagas@gmail.com>
Co-authored-by: Tanish Manku <tmanku.dev@gmail.com>
A shape layer's path is its vector mask in Photoshop (Properties > Masks),
with its own vector-mask density and feather. PhotoCraft's ShapeLayer had
neither, so soft shapes could not be made, and stroked soft shapes from PSDs
lost both on import.
- doc: ShapeLayer gains `density` (0..1, default 1) and `feather` (px,
default 0).
- vector: the shape renderer applies them to the fill as a soft vector mask
(fill shows beyond the path at 1 - density; the feather is the vector
mask's Gaussian), so the shape's own pixels, the GPU (which samples them)
and the stroke/fill split all follow. The stroke stays crisp. The feather
blur moves from compose::masks to vector::feather and both share it and the
feathered area, so a shape and an equal vector mask render the same pixels.
- compose: soft shapes' bounds reach their fill, their layer effects follow
the soft alpha, and the split cache key includes density and feather.
- engine: `layer.vectorMask.edit` on a shape layer sets density/feather in one
history step (path/enabled/linked/invert are refused there); density is now
validated (finite 0..100) instead of clamped. `layer.vectorMask.info`
reports a shape's values.
- ui: Properties shows the Vector Mask Density and Feather sliders for a
selected shape layer in both themes (live drag, one undo per gesture).
- .pcraft: manifest and convert carry both with serde defaults (older files
load at 100 % and 0 px).
- PSD: export writes them as the vector density/feather mask parameters;
import reads them into the shape (re-rendered, as the stored pixels lack the
fill beyond the path). Soft unstroked solid/gradient shapes now import as
shapes instead of fill layers with a vector mask; pattern-filled ones stay
fill layers.
Photoshop's 10 px feather on a 100 px black square, row 100, x = 30..72:
ours is within 1 level of every measured value (8, 16 and 32 bits);
density 50 % shows 127/128 beyond the path and 0 inside.
Scorecard: TOOL-214-12 done.
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>