layer.pickAt hit-tested every layer by the alpha of the pixel under the
pointer, so a click in the gap between a type layer's letters picked the
layer under it. Like Photoshop, Auto-Select (and Cmd-click) now hits a
type layer anywhere inside the bounds of its rendered text. The
right-click layer list still lists only layers with pixels there.
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
Open and save .ora with pixel layers (any offset), nested groups, pass-through
groups, names, visibility, opacity, edit/alpha locks and blend modes (svg:* plus
Krita's krita:* names), at 8 and 16 bit. Save applies pixel masks, renders
text/shape/fill/smart layers to pixels and reports what OpenRaster can't hold.
Wired into File > Open/Save, the CLI, automation/MCP, the web picker and the
desktop file associations. Checked against 34 Krita 5.2.9-authored files
(opt-in krita_corpus test) and Krita re-opening our exports.
Co-authored-by: Scott Campbell <251750033+scottcampbelldata@users.noreply.github.com>
Co-authored-by: Brandon Thomas <echelon@gmail.com>
- The live set found beside Photoshop is offered, never applied unasked: an
"Import keyboard shortcuts?" prompt names the set and how many keys it
changes, with Import / Don't Import. Either answer is recorded in
dialogs.photoshopShortcuts, so it is asked once; ui.inspect shows the
pending offer as kysOffer.
- Parsing and label matching moved to the engine (photocraft_engine::kys), so
edit.keyboardShortcuts {"importKys": <xml>} imports a set from agents, the
CLI and MCP; the app's dialog uses the same plan with its menus' labels.
- "The keyboard shortcut set was not imported: {error}" is translated.
- .kys input over 4 MiB is refused before it is read as text.
Co-authored-by: Brandon Thomas <echelon@gmail.com>
* Expose native shape stroke controls with staged previews
* Document shape stroke defaults in MCP control schema
* Regenerate docs/scorecard.md
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: optimalbytee <optimalbytee@users.noreply.github.com>
Co-authored-by: Brandon Thomas <echelon@gmail.com>
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* Content-Aware tools: Photoshop's behaviour, measured
Photoshop 25.4 was measured as a black box (synthetic and public-domain
images, results read back exactly) and the content-aware family follows it:
- Fill (inpaint): coarse to fine with the coarser level's matches scaled up
and voted with the finer level's own pixels, the coarsest level filled
from the hole's edge inwards, a shallower pyramid. The fill is pieces of
the image copied pixel for pixel with narrow seams, as Photoshop's;
before, it was visibly blurred. Pixels have roles (hole, context,
source, void), so excluded areas stay context instead of being filled.
- Colour adaptation: Image Melding's per-patch gain and bias, limited per
level, instead of a low-frequency membrane pull.
- Sampling window: Photoshop's square of side 4·√(max(w,50)·max(h,50))
centred on the selection, slid inside the canvas; Edit › Fill,
Rectangular, Auto, Delete and Fill and Spot Healing use it.
- Auto sampling area: what looks like the selection's surroundings (local
colour and contrast, one min cut), fitted to Photoshop's overlay.
- Patch Tool: a Content-Aware mode (Structure, Color, Sample All Layers).
- Content-Aware Move: Structure 3..7 alike, a band about a patch wide;
Color as a gain/bias limited to about 0.04 per step.
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
* Remove tool: keep its own sampling margin (fill_cmds::sampling_margin is gone)
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
Co-authored-by: Brandon Thomas <echelon@gmail.com>
On a smart-object layer, Image > Adjustments now records an editable
smart filter instead of committing disaster.
- new engine helpers:
- adjust_cmds::has_adjustable / adjust_as_smart_filter route
image.adjustments.<kind> onto the source, with the selection as the
filter mask, through smart_cmds::add_smart_filter
- brush/eraser/pencil/live preview strokes now render inside
with_cmyk_space(doc_cmyk_space(session)), so painted colours follow the
document profile the same way the compositor does
- docs/scorecard.md: FILE-215-4 partial -> done
- tests: adjust_cmds/tests + brush_cmds/tests, plus panic_hunt and
the lib suite all green on the committed tree
Known follow-up, already filed:
- FILE-215-5 rows: double-clicking an adjustment smart-filter row is still
a no-op. smart_ui::open_editor only proceeds when
filter_dialog::has_dialog returns true, and has_dialog accepts
filter.*, a fixed non-adjustment set and PREVIEWED - but not
image.adjustments.* (those open through adjust_dialog::open, which isn't
wired into the smart-filter row).
This is one commit on top of the latest upstream/main (rebased to fix the
stale fork ancestry that was blocking PR creation).
Co-authored-by: Brandon Thomas <echelon@gmail.com>
* Add the Remove tool with non-local patch completion
Tool::Remove (J flyout) paints a hole that paint.remove fills from its
surroundings as a background job, in one undo step. A stroke around an
object also removes what it encloses; the selection limits the hole.
The fill (photocraft_algo::nonlocal) follows Newson, Almansa, Gousseau and
Pérez (IPOL 2017): texture features in the patch distance, onion-peel
initialisation, match fields upsampled between levels and a best-patch
final copy, plus gradient-domain hiding of edge and interior seams.
Sparse holes are filled in tiles. inpaint::complete (Content-Aware Fill,
Spot Healing, Content-Aware Move) is unchanged.
On 20 holes in public-domain photos (remove_quality) the fill keeps 0.89
of the texture it replaces, against 0.54 with the Wexler/PatchMatch
completion. 24 MP (remove_bench): 100 px ring 120 ms, 1000 px ring 2.5 s.
* Translate the Remove tool's label and tighten comments
Adds "Remove Tool" to every UI catalog, following each one's pattern for
tool names and its existing word for Remove. Corrects comments that no
longer matched the code: the benchmark's description, the tile and margin
minimums, and the reasons given for two parameters.
* Put the Remove tool first in the J group
The J flyout's slot now shows Remove until another J tool is picked, and
J from another group selects it; repeated J goes on to Spot Healing Brush,
Healing Brush, Patch, Content-Aware Move and Red Eye.
---------
Co-authored-by: Brandon Thomas <echelon@gmail.com>
* Layer › Rasterize acts on every selected layer; the Layers menu offers Rasterize Layers (#2243)
Rasterize › Layer / Type / Shape / Fill Content / Smart Object took only the active
layer, so right-clicking inside a multi-layer selection converted one layer. Without a
`layer` param they now rasterize every selected layer they apply to, in one history step.
An explicit `layer` (the "Rasterize?" paint prompt, scripts) still targets exactly one.
Layers panel: a multi-layer selection gets one "Rasterize Layers" item (greyed only when
nothing selected can be rasterized, judged by the whole selection, not the clicked layer).
Edit Contents and Convert to Layers act on one layer, so they are not offered there.
Adobe's documentation: select "the layer or layers you'd like to rasterize".
Tests: engine integration (mixed type/shape/fill/smart selection, one undo step, per-kind
commands, explicit layer, nothing to rasterize, bad targets) and ui-egui (menu entries,
enablement, right-click → Rasterize Layers end to end). The new behaviour tests fail on
the old code.
* Layers menu and layer commands follow the selection, not the active layer (#2244)
Availability of Rasterize, Create/Release Clipping Mask, Add Layer Mask and Paste/Clear Layer
Style was decided by the active layer, so one selection was greyed or not depending on which of
its layers happened to be active (with the Background active, Create Clipping Mask and Add Layer
Mask were greyed although they would have run on the other layers), and Rasterize Layer was
enabled for layers it then refused ("nothing to rasterize"). Several of these commands also only
ever acted on the active layer, whichever layer the menu was opened on.
- Add Layer Mask (Reveal/Hide All, Reveal/Hide Selection), Paste Layer Style and Clear Layer Style
run on every selected layer that can take them (not the Background, layers that already have a
mask, layers without a style), in one history step. An explicit `layer`, or a single selected
layer, behaves as before.
- `enable_rules::selection_targets`: availability of those commands, Create/Release Clipping Mask
and Rasterize is judged by the selection.
- Rasterize Layer is enabled only for type, shape, fill and Smart Object layers, which is what the
command converts.
- Items with no single target stay greyed for several layers: Blending Options, Copy Layer Style,
Quick Export, Export As and the per-layer mask items. A multi-layer menu has one stable mask item.
Tests: engine integration (mask, paste and clear on a selection, errors, unchanged single-layer
paths) and a property test over 20 selections x clipboard state x 7 commands: an enabled item runs,
and for several layers a greyed one would have changed nothing. It fails on the old rules for
["R1", "BG"] with the Background active, the case from the bug report.
---------
Co-authored-by: Brandon Thomas <echelon@gmail.com>
Edit › Content-Aware Fill… opens Photoshop's workspace (measured on 25.4)
instead of the generic dialog: a full-window dialog like Liquify's.
- Tools: Sampling Brush (B), Lasso (L), Hand (H), Zoom (Z), each with its
options bar.
- Document view: the sampling area tinted green at 50 % and the fill area's
marching ants.
- Preview panel: the fill computed in the background after each change,
opening framed on the sampling window.
- Content-Aware Fill panel: Sampling Area Overlay (Show, Opacity, Color,
Indicates), Sampling Area Options (Auto, Rectangular, Custom, Sample All
Layers), Fill Settings, Output Settings, and the reset buttons.
- OK, Apply, Cancel.
As Photoshop's:
- The Sampling Brush subtracts in Auto and Rectangular and adds in Custom,
which starts empty; Alt reverses. Its first size is a tenth of the
window's side. Painting keeps the option, and added strokes may lie past
the window.
- The lasso edits the fill area (New, Add, Subtract, Intersect, Expand,
Contract); the window and the Auto area follow.
- Apply fills and stays open; Cancel keeps what was applied. Ctrl+Z undoes
a stroke or an edit. Output opens on New Layer; settings are remembered.
The workspace holds plain data. `edit.contentAwareFill` takes it as
`samplingStrokes`, `fillEdits`, `sampleAllLayers` and `layer`, and both
the preview and OK run one plan (`content_aware_plan`), so the preview is
what gets written. New strings are translated in every catalog.
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
* Pen pressure curve: Preferences › Tools shapes how pen pressure reaches every brush
Brush phase 6a (TOOL-213-11, #610). Every pen paints its pressure straight through, so artists
with a heavy or a light hand, or a tablet whose response feels off, had no way to adjust it.
- `tools.pressureCurve`: [input, output] points, linear by default, settable with `prefs.set`
(validated: 2..=16 pairs within 0..1).
- `prefs::PressureCurve` reads it as a monotone cubic (Fritsch–Carlson), so a firmer press never
gives less pressure. It sanitises the points itself (finite, clamped, sorted, one per input,
capped, outputs made non-decreasing; flat beyond the ends), because a whole-section update or a
hand-edited file can store anything.
- The stylus maps every pen sample's pressure through it before any brush sees it, so the live
stroke, the commit and the journal agree. A mouse stays at full pressure.
- Preferences › Tools draws a curve editor under Use Tablet Pressure: drag a point, click to add
one, right-click to remove one, with Linear, Soft and Hard presets. Translated in all 16 catalogs.
* Regenerate docs/scorecard.md
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Brandon Thomas <echelon@gmail.com>
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* Fix SVG import detection and configurable group depth
* Fix malformed SVG error routing and formatting
* Refresh scorecard for SVG depth preference
---------
Co-authored-by: Brandon Thomas <echelon@gmail.com>
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
Rasterize › Layer / Type / Shape / Fill Content / Smart Object took only the active
layer, so right-clicking inside a multi-layer selection converted one layer. Without a
`layer` param they now rasterize every selected layer they apply to, in one history step.
An explicit `layer` (the "Rasterize?" paint prompt, scripts) still targets exactly one.
Layers panel: a multi-layer selection gets one "Rasterize Layers" item (greyed only when
nothing selected can be rasterized, judged by the whole selection, not the clicked layer).
Edit Contents and Convert to Layers act on one layer, so they are not offered there.
Adobe's documentation: select "the layer or layers you'd like to rasterize".
Tests: engine integration (mixed type/shape/fill/smart selection, one undo step, per-kind
commands, explicit layer, nothing to rasterize, bad targets) and ui-egui (menu entries,
enablement, right-click → Rasterize Layers end to end). The new behaviour tests fail on
the old code.
Co-authored-by: Brandon Thomas <echelon@gmail.com>
* Move tool on a locked layer: Photoshop's message
Dragging with the Move tool (or Cmd with another tool) on a layer it can't
move showed nothing: the Background or a position-locked layer with no
selection, or a locked layer whose selected pixels can't float. Photoshop
puts up "Could not use the move tool because the layer is locked." when
the drag starts (a plain click says nothing); move_lock.rs does the same
with the Error dialog, translated in every catalogue. The float lock rule
moves to float_cmds::locked_for_float so the UI can ask before the press
goes anywhere.
Also in Dutch and Ukrainian. The Cmd-with-a-painting-tool case lands with
the Cmd-as-Move change, whichever merges second.
* Fix merge: close the lock-message test
---------
Co-authored-by: Brandon Thomas <echelon@gmail.com>
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* Masks: target a new layer mask and keep separate colour pairs for mask and pixels (#2166)
Photoshop keeps one foreground/background pair for layer masks and one for
layer pixels and swaps them when the edit target changes; adding a mask
targets it, with white/black. PhotoCraft never touched the colours when a
mask was targeted, and adding a mask left the pixels targeted.
- engine: ToolState::target_mask swaps in the other target's pair
(mask pair starts at white/black, colours picked on either side are kept).
- ui-egui: sync_mask_targets applies the effective target (mask targeted,
active layer has a mask, composite channel, no Quick Mask) after every
command, every frame and every control request; the Layer Mask add
commands target the new mask.
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
* Fix merge: close mask colour-pair test before the deletion tests
---------
Co-authored-by: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
Co-authored-by: Brandon Thomas <echelon@gmail.com>
* Keep the selection when smart selection finds nothing
Select Subject and Object Selection run heuristics that often miss on busy
photos. In Replace mode an empty result cleared the selection, so the Select
Subject button looked dead and even destroyed existing work. apply() now
preserves the selection and reports changed:false in every mode.
The UI also answers visibly instead of staying silent: empty smart-selection
results set an info status suggesting what to try next, and a click with
Object Selection falls back to a Quick Selection dab at the brush size
instead of doing nothing.
* Translate the smart-selection status messages; drop needless borrows (clippy)
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Brandon Thomas <echelon@gmail.com>
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
parse_brush, shared by Smudge, Blur, Sharpen, Dodge, Burn, Sponge, the
clone/healing tools and the History Brush, defaulted `spacing` to a fixed
25% instead of the session brush's spacing (Brush Settings > Brush Tip
Shape > Spacing). The UI never sends `spacing` for these tools, so the
Brush Settings value was ignored. Default to the session brush spacing,
as Photoshop does; an explicit `spacing` param still wins.
Co-authored-by: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
* Use shared Color Picker for Layer Style colors (#2015)
* Use shared Color Picker for text style colors (#2015)
---------
Co-authored-by: Brandon Thomas <echelon@gmail.com>
* Notices: auto-hide after a delay, with Interface preferences (#2022)
Non-blocking notices no longer stay on screen until closed: each card
hides itself after Interface › Notification › Auto Hide Notifications'
delay (new, default 6 s), and the timer pauses while the pointer rests
on the stack until it moves away. Two new Interface preferences,
notificationAutoHide and notificationDurationSeconds, are read by
notices.rs; errors still land in the status bar.
The decision lives in the pure notices::expire helper, unit-tested
without an egui clock; Notice.shown_at round-trips through the control
channel with serde defaults. Labels translated across the complete
catalogues. Regenerated docs/scorecard.md.
* Notices: repaint on expiry, and a fresh delay when a long hover ends (#2022)
Addresses review of the auto-hide change:
- When the last notice expires, `show` had already painted it and, with
nothing left, requested no further frame, so the card lingered until
unrelated input. It now requests a repaint in the frame that drops
anything, clearing the stack at once.
- A stationary hover over a settled UI refreshed `shown_at` only on
frames, so hovering longer than the delay then leaving expired the
notice instantly. `show` now tracks the pointer leaving the stack and
restarts the timers on that frame, so hovering never counts as elapsed
time.
Regression tests: expiring a notice requests a frame to clear it;
leaving a long hover gives a fresh delay.
---------
Co-authored-by: Brandon Thomas <echelon@gmail.com>
* Appearance modes: sync with system, separate dark and light themes
* Appearance button cycles Auto, Light, Dark
* Appearance: default stays Dark, follow the portal signal instead of polling, split out the Preferences resize
* Preferences: size both appearance cards for the five dark themes
---------
Co-authored-by: Brandon Thomas <echelon@gmail.com>
* Brush preset chip: draw the tip preview in the icon colour on light themes
The options-bar chip always painted the round tip white, which nearly vanished on Studio
Light's chrome (246 gray) and disappears entirely on a white header bar. Dark themes keep
Photoshop's white tip; light themes use their icon token.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Add Adwaita and Adwaita Dark themes
Two opt-in themes that put the Studio layout in GNOME's libadwaita palette, so PhotoCraft
sits with the rest of a GNOME desktop: header bar, sidebar, card and view colours, the
GNOME blue accent (#3584e4), destructive and warning colours, 6 / 9 / 12 px radii, and a
neutral (not red) close button as in GNOME's title bars. The default theme is unchanged.
Wired through ThemeKind, the interface.theme preference (adwaita, adwaitaDark), Window ›
Theme and the control channel, with menu and preference labels in every complete-menus
language ("Adwaita" kept as the proper name). A test holds both themes to WCAG contrast:
7:1 for text and 4.5:1 for dim text on every surface that carries labels.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* i18n: translate the Adwaita theme names in Dutch and Ukrainian
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
Co-authored-by: Brandon Thomas <echelon@gmail.com>
Squashed onto main, with the maintainer's asks applied:
- Photoshop's blend menus (layers, brush, pencil, gradient, layer style) stay as they are;
the Layers panel and Blending Options list a Paint.NET mode only for a layer that uses one.
- The six Paint.NET mode labels are translated in every catalog, and the blend-mode i18n test
iterates layer_modes().
- pdn::pixels rejects truncated uncompressed (version 1) data before allocating its buffer.
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
Photoshop 25.4 was measured as a black box (synthetic and public-domain
images, results read back exactly) and the content-aware family follows it:
- Fill (inpaint): coarse to fine with the coarser level's matches scaled up
and voted with the finer level's own pixels, the coarsest level filled
from the hole's edge inwards, a shallower pyramid. The fill is pieces of
the image copied pixel for pixel with narrow seams, as Photoshop's;
before, it was visibly blurred. Pixels have roles (hole, context,
source, void), so excluded areas stay context instead of being filled.
- Colour adaptation: Image Melding's per-patch gain and bias, limited per
level, instead of a low-frequency membrane pull.
- Sampling window: Photoshop's square of side 4·√(max(w,50)·max(h,50))
centred on the selection, slid inside the canvas; Edit › Fill,
Rectangular, Auto, Delete and Fill and Spot Healing use it.
- Auto sampling area: what looks like the selection's surroundings (local
colour and contrast, one min cut), fitted to Photoshop's overlay.
- Patch Tool: a Content-Aware mode (Structure, Color, Sample All Layers).
- Content-Aware Move: Structure 3..7 alike, a band about a patch wide;
Color as a gain/bias limited to about 0.04 per step.
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
* Fix mask trash targeting and Solid Color Fill editing
* Fix Solid Color picker mode conversion and validate RGB ranges
* Apply rustfmt to Solid Color regression tests
* Fix Solid Color mode regression test using distinct RGB values
---------
Co-authored-by: abc2cb <271337822+abc2cb@users.noreply.github.com>
Co-authored-by: Brandon Thomas <echelon@gmail.com>
Rebased onto main as one commit (the PR's net diff); the preset-drop mapping now uses
ViewXform::active, which accounts for the display's pixels per point.
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* update brush button
* ui brush duplicated highlight fix
* formatting fix + locale
* i18n: translate "Update the current brush with these settings" in remaining complete catalogs
* Tip Shape picks the tip only; set_brush records the preset once accepted
- A click in the Brush Tip Shape grid copies the tip fields only (main's
Photoshop behaviour: the dynamics sections stay); the picked preset is
marked current with brush.presets.setCurrent instead of a whole-preset
tools.setBrush, so identity-based selection still tracks it.
- tools.setBrush sets current_preset only after the brush merged and
validated, so a failed call leaves no state behind; a reset still wins
over a preset in the same call. Tested.
- brush.presets.save / brush.defineFromSelection append at the end again
(insert-after-the-copied-brush had no Photoshop reference).
* Brush presets: forget the picked preset when the tool's brush swaps; no indexing in brush.presets.update
Each painting tool keeps its own brush (#218), so Update Brush could overwrite the
preset picked with one tool with another tool's brush.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: JJ <jj@dot.com>
Co-authored-by: Brandon Thomas <echelon@gmail.com>
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* Brushes: keep the folder hierarchy of imported .abr files (#1851)
Photoshop CC brush files keep their Brushes panel folders in a `phry`
(preset hierarchy) section; the importer skipped it, so every preset of an
.abr landed in one flat group named after the file.
- photocraft-psd: `abr::parse` reads `phry` (a token stream of `Grup`
{Nm, zuid}, `preset` and `groupEnd` objects) into `AbrFile::folders`, one
folder path per preset. A damaged hierarchy never fails the parse: a stray
groupEnd, more or fewer preset tokens than presets, folders nested deeper
than MAX_FOLDER_DEPTH (32) or an unreadable section become warnings and the
affected presets land at the top level. `write_v6_folders` writes `phry`
back (`write_v6` is unchanged).
- photocraft-paint: `BrushPreset::folder`, the nested folder path inside its
group (serde default, so older JSON loads unchanged).
- photocraft-io: the file's folders nest inside the group named after the
file, as Photoshop's Import Brushes does.
- Preset store: each stored preset records its `folder`; group files written
before this change load with every preset directly in its group (no
rewrite). Paths from disk and from imported .pcpresets files are bounded.
- Commands: brush.presets.move, moveGroup, renameGroup and deleteGroup take
an optional `folder` path to move a preset into a folder, or to move a
folder among its siblings, rename or delete it. importAbr reports the
number of folders kept.
- Brushes panel and Brush Preset picker: nested folders are drawn indented
under their group (list and grid), open and close like groups, take
dropped presets, reorder among their siblings by drag and drop, and have
Rename/Delete in their context menu.
Checked against the 4-folder ABR Photoshop 25.1 exports of its default
brushes (8/6/6/8 presets): all 28 land in their folders, and a write/parse
round trip keeps them.
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
* Brushes: bound phry folder allocation; reword the move folder param
Review on #2001:
- read_phry now runs after every section is read, so it builds folder
paths only for the presets in desc (a phry may precede desc), and the
paths it holds are capped at 16 MB; presets past the cap import at the
top level with a warning.
- brush.presets.move documents `folder` as folder names, so the
automation filesystem-path classifier no longer flags it.
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
In a Grayscale or CMYK document, effect colours (overlays, shadows, glows,
strokes, satin, bevel, gradient stops) were stored as RGB and drawn
unconverted: a red Color Overlay in a Gray document was red. Effect::in_mode
converts them where effects are written: the effect commands, the Layer
Style dialog (replace), Paste Layer Style and style presets.
Co-authored-by: Claude <noreply@anthropic.com>
Co-authored-by: Brandon Thomas <echelon@gmail.com>
An RGB pattern (every built-in one) showed in colour as a pattern fill or
Pattern Overlay in a Grayscale or CMYK document, unlike Edit > Fill, the
export, and Photoshop, which fills in grey but keeps the pattern's colours
(a Grayscale round trip brings them back).
pattern::pattern_rgba projects a pattern's pixels through the document's
mode when painted; the CPU prepared tiles and the GPU pattern textures use
it. Patterns themselves are unchanged.
Co-authored-by: Claude <noreply@anthropic.com>
Co-authored-by: Brandon Thomas <echelon@gmail.com>
Brush phase 3a (owner-approved brush overhaul):
- Every stroke point now carries a time (`timeMs`). egui's pointer events have none, so a frame's
samples are spread evenly between the previous point and the frame time. Speed spacing, airbrush
Build-up and Stroke Catch-Up worked from scripts but never from the canvas, because every point
had time 0. The live stroke and the commit get the same times.
- A stroke started on the press takes its moves from the press on. The moves before egui
recognised a drag (its 6 pt click distance) were dropped, which gave every stroke a straight
start and lost the pen's pressure ramp-in.
- Smoothing pulls by stroke time (16 ms steps, fractional below that), not once per input event,
so a 1000 Hz mouse and a 60 Hz pen feel the same. Without Stroke Catch-Up a paused pointer stops
the brush, as in Photoshop.
- A pointer held still keeps the stroke's clock running only while the stroke changes with time
(airbrush Build-up, or smoothing still catching up): it repeats the held point every 16 ms and
asks for repaints, then goes idle.
* Edit > Stroke: whole opaque pixels; Center puts the odd pixel inside; canvas edge strokes
Center expanded and contracted the selection by w/2, so odd widths left
half-transparent pixels on both sides (a 1 px stroke was a 2 px band at
half opacity), and a selection edge on the canvas border got no stroke
(Select All, Stroke Inside drew nothing). As in Photoshop, widths round up,
Center puts ceil(w/2) inside and floor(w/2) outside, and the mask is padded
so the canvas border is a selection edge.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Edit > Stroke: a hard-edged selection strokes hard, matching Photoshop's curves
Photoshop's 6 px Outside stroke of a 14 px circle selection made without
anti-aliasing is reproduced exactly when a pixel is stroked whenever its
centre is less than width + 1 from a selected pixel's (our expand gave the
6..7 px fringe partial alpha). For a hard selection the band is hardened;
soft selections keep their soft edges.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Edit > Stroke: the inside of a hard stroke matches Photoshop on curves
Photoshop's 3 px and 5 px Inside strokes of a 14 px hard circle, and its 6 px
one filling the circle, fit one rule: inside, a pixel is stroked when its
centre is less than width + 1/2 from an unselected pixel's (the outside rule
is width + 1). Straight edges are unchanged.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude <noreply@anthropic.com>
Opening the preset store decoded every imported tip at full resolution, and
each tip then lived twice: in the session's library and in the store's
snapshot of the last sync. A generated 600-brush library (16-bit tips,
800-2000 px, 2.27 GB decoded) cost about 4.5 GB after import and again after
every restart.
Library presets now hold their bitmaps as StoredTile references with a small
saved preview (at most 96 px): photocraft-paint gains TipShape::Stored and
Pattern::Stored (rendered with the full bitmap when loaded, else the preview),
and the store writes each tip's size and preview with its group. Opening the
store reads previews only; once a group is written its presets drop their full
bitmaps. A tip is decoded when its brush is used (picking a preset, a stroke
naming one, exporting) into a 256 MB least-recently-used cache. A loaded stored
tip serialises as `sampled`, so tool presets, actions and brush.get keep the
same JSON. Stores written before this change have no previews: their tips are
decoded once at the next start, eight at a time, and the groups rewritten. A
missing or corrupt tip file is now reported when the brush is used.
Measured with crates/engine/examples/abr_memory.rs on the 600-brush library
from crates/io/examples/gen_abr_library.rs (Windows, release):
after import 4565 -> 38 MB working set, after restart 4551 -> 20 MB,
after using 5 brushes 4560 -> 37 MB; store open 1.47 s -> 0.05 s.
Co-authored-by: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
The app still showed the Adobe Photoshop name in several user-visible
strings. Per the product rule (user-facing text says PhotoCraft only),
none of these mention Photoshop now.
UI labels, tooltips and status messages:
- New Document preset "Default Photoshop Size" -> "Default PhotoCraft Size"
- "All shortcuts reset to Photoshop defaults." -> "All shortcuts reset to
PhotoCraft defaults."
- "Import Photoshop brushes (.abr)" -> "Import brushes (.abr)"
- smart-filter fallback name "Photoshop filter" -> "Smart filter"
- File > Save As .psd/.psb filter "Photoshop" -> "PSD Document"
Errors and warnings:
- "this Photoshop filter isn't implemented in PhotoCraft" -> "this smart
filter isn't implemented in PhotoCraft"
- smart_map: "has no PSD equivalent", "not a recognized filter", "its
filter data is missing/unreadable", "this filter has no PSD equivalent"
- tiff_layers: "the PSD layer data...", "the PSD image resources..."
- multichannel: "32-bit Multichannel isn't supported"
- abr: "not a readable brush file (.abr)"
- gradient import: "not a readable gradient file (.grd)"
Translations: updated the changed tl! sources in all 16 catalogs and
dropped the stale "Load Photoshop brushes (.abr)" entries.
Installer / OS metadata: de-branded the nfpm description, the PSB MIME
comment, the AppStream summary/description, the macOS UTType
descriptions, the Windows ProgId Description and the desktop launcher's
Keywords. The Photocraft.PhotoshopDocument ProgId and the
image/vnd.adobe.photoshop MIME/UTType stay: machine identifiers,
changing them hurts file fidelity and Open-with registration.
Command params docs (agent-facing): dropped Photoshop from the
type_cmds kernPair text, the layer_menu_cmds Advanced Blending defaults
and the mask_view_cmds backslash-key text. The "photoshopManages" wire
value stays. Comments, format identifiers and the "photoshop" theme
alias are out of scope and unchanged.
The macOS native-menu shortcut resolution messages no longer say "as in
Photoshop" (Hide/Minimize).
The History panel footer's trash and file-plus buttons discarded their
clicks. They now dispatch two new engine commands:
- history.deleteState {"state"?}: drops the state and every later one,
as Photoshop's linear history does; the document returns to the state
before and the deleted steps can't be redone. The oldest state can't
be deleted (button disabled).
- history.newDocument {"state"?,"name"?}: a new document holding the
document at that state, named after the state, with a fresh history.
Snapshots aren't implemented, so Create new snapshot is shown greyed.
Co-authored-by: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
A successful Save As (UI, automation or headless) renames the document to the written file, so its tab and title stop saying Untitled. The name is file identity, not a history step: undo and redo keep it. Failed writes, Save a Copy and exports leave the name, path and dirty state alone, and a deferred save no longer steals the selected tab.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Quick Selection is now one min cut around the brush footprint (Boykov & Jolly 2001; coarse to fine for
large windows, Lombaert et al. 2005), with costs fitted to Photoshop 25.4's masks measured as a black box
on 105 synthetic and public-domain cases (mean IoU 0.94 synthetic, 0.83 paintings), at Photoshop's
512x512 working-resolution rule. Replaces the colour-model flood, which selected far too much.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Large Tabs makes the document tab strip taller (34 px) with larger type; turning off Export Clipboard stops copies being mirrored to the OS clipboard; Show Channels in Color tints the Channels panel thumbnails (RGB from black to the primary, CMYK from white to the ink). Settings that do nothing: 48 of 141 (#204).
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>