Both quoted stale Type checklist counts (3/2/4 and 0/3/6); the
regenerated scorecard has 4 done, 4 partial, 2 missing with area type
(TYPE-218-10) as partial. The Type figure (40%) is an estimate this work
does not re-measure, so it and every percentage stay as they were; the
parity doc gets its status line and a revision-history row, per AGENTS.md
section 4.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
The TYPE-218-10 note said type.fillPath still worked on paths beyond the
Type tool's click cap; it never did for curved paths, and it now refuses
them with "too many anchor points". The note says what a click and the
command each do, and docs/scorecard.md is regenerated.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Area type is partial: PSD saves it as paragraph text over the path's
bounds, and mixed type sizes in one area paragraph space at the largest
line. Also notes the 4096-anchor click limit and overflow of words wider
than every span. TYPE-218-1 now credits the Type tool click on an outline.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
PSD smart filters Clds, DfrC, Fbrs and LnsF open as editable PhotoCraft filters instead of
kept-verbatim entries, and are written back like Photoshop: seeds, the item's foreground and
background colours, brightness, centre and lens (Zm/Nkn/Nkn1/PnVs = 50-300mm Zoom, 35mm,
105mm and Movie Prime), with Photoshop's descriptor names. Checked against items saved by
Photoshop 27.
A one-step setup of frequency separation for retouching: from the active pixel layer it builds a
"Frequency Separation" group right above it with a "Low Frequency" layer (Gaussian Blur at the
chosen radius, the same pixels Filter > Blur > Gaussian Blur makes) and a "High Frequency" layer,
High = (Source - Low) / 2 + 0.5 per colour channel on Linear Light, which composites back to the
source: within one level at 8 bits (as Photoshop's Apply Image recipe), exactly at 16 and 32 bits
for values in 0..1. One history step; the source layer is left as it was and High is targeted.
The command (layer.frequencySeparation, {"radius":0.1..1000=4}) gets the schema dialog for its
radius and sits in Filter > Other after Color to Alpha; it is no filter.* command because it adds
layers rather than filtering the target (no mask or channel routing, Fade or Last Filter). It is
refused on non-pixel and empty layers, a targeted channel or mask, and in CMYK and Lab, where
Linear Light does not rebuild the source.
cargo test runs the ~258 test binaries one at a time; nextest runs them in parallel. Its new `ci`
profile stops at the first failure (a red PR frees its runner early), fails a test that hangs for
10 minutes instead of letting it hold the runner, and repeats every failure at the end of the log;
the GPU test group still applies. Same --workspace --locked --features heif selection, so the build
is unchanged. Doctests stay on cargo test --doc.
postscript_only_style_shows_actual_subfamily relied on another test in the same process having
started the font scan; under nextest it runs alone, so it starts the scan itself (as #2933 does).
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
The theme no longer decides the Color panel's layout: Photoshop's themes used to
get the stretched spectrum field, the others a short field with HSB sliders.
The panel menu now picks it, as in Photoshop: Hue Cube (default), Brightness
Cube, Color Wheel, and Grayscale, RGB, HSB, CMYK, Lab and Web Color sliders over
a colour ramp, plus Copy Color as HTML / Hex Code, the ramp choices (RGB and
CMYK Spectrum, Grayscale Ramp, Current Colors) and Make Ramp Web Safe.
- Slider rows: label, gradient track with a triangle thumb, field and unit; the
out-of-gamut and web-colour alerts sit under the chips. Web sliders snap to
web steps and take hex. Typed HSB, CMYK and Lab values are kept while they
still give the colour.
- Ramp: fills the group, white and black boxes at its end; Shift-click cycles
the ramps, Alt-click picks the other colour, right-click opens its menu.
- Color Wheel: HSB sliders over a hue ring and a rotating saturation/brightness
triangle, with an add-to-swatches button.
- The choice is saved in UI state; `ui.set colorPanel` merges and takes `mode`,
`ramp` and `webSafeRamp`.
- Menu strings in all 20 complete catalogs; UI-217-17 done in the scorecard,
ui-parity, gaps and control-protocol docs.
Closes#6000. Closes#2569.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01HJVuULF2tg9pN2x4VJoED1
* Fix two ui-egui tests broken on main by concurrent landings
- profile_open_tests: #5614 renamed the built-in profile to "(PhotoCraft)" after #5208
hard-coded "(Photocraft)" in the Use-embedded button label.
- smart_object_curves_preview_keeps_its_size_on_a_reduced_proxy (#5779): the reduced
square is in the right place, but its corner pixels are 220/255 after the smart
object's resampling; assert full coverage inside and over half at the corners.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Web: ship the wasm as compressed parts behind a boot module (#5302)
The release site held the app's wasm as one file, which sits at the 25 MiB
per-file cap of Cloudflare Pages, so the 24 MiB gate failed unrelated PRs.
packaging/web/package.sh now gzips the wasm and cuts it into parts of at
most 20 MiB under app/, and ships the page of a new crate,
apps/photocraft-web-boot. That module fetches the parts in order, has the
browser inflate them (DecompressionStream) and passes the stream to the
app's own wasm-bindgen loader, so the browser still compiles while it
downloads. A failed download is retried twice, then the page says so.
The check is now that no file in the site is over 24 MiB. trunk build in
apps/photocraft-web and the Docker image still give one .wasm.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Web boot: inflate the parts in the module where the browser can't (#5302)
* Tests: the adjustment-layer drag preview test follows #5778 (#5926)
#5778 caps a live adjustment-layer preview by the view's zoom, so at 100 %
the drag shows full resolution even with Low Resolution Previews on. The
test still expected the reduced copy there. It now checks that at 100 % every
column shows by default, and moves the low-res on/off comparison to 50 %,
where the reduced copy is still used: on, the drag shows only the (inverted)
black columns; off, it matches the committed view.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Brandon Thomas <echelon@gmail.com>
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
Photoshop stores Stroke › Overprint as `overprint` in the FrFX
descriptor. StrokeFx had no field for it, so an edited stroke was
written back without it and a stroke with Overprint on lost it.
Add `StrokeFx::overprint` (serde default, so older .pcraft files load),
read and write `overprint`, accept it in layer.layerStyle.stroke and show
the Overprint checkbox in the Layer Style dialog, as Photoshop does.
Rendering is unchanged.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Photoshop stores Bevel & Emboss › Gloss Contour › Anti-aliased as
`antialiasGloss` in the effect descriptor. The document model had no
field for it, so import dropped it and export regenerated the bevel
without it: once a bevel was edited (the Layer Style dialog re-applies
all its settings), a saved PSD reopened in Photoshop with the gloss
contour aliased.
Add `Bevel::gloss_anti_alias` (serde default, so older .pcraft files
load), read and write `antialiasGloss`, accept `glossAntiAlias` in
layer.layerStyle.bevelEmboss and show the Anti-aliased checkbox next to
the Gloss Contour in the dialog, as Photoshop does. Rendering is
unchanged: contour anti-aliasing is not rendered for any effect yet.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Photoshop writes image resource 1092 (guides v2: 1032's guides plus a
colour per guide) and 1097 (one GUID per guide) next to 1032. Export
regenerated 1032 from the document but wrote 1092 and 1097 back verbatim,
so after Clear Guides, New Guide, a move or a recolour the file carried
two guide lists that disagree.
Both are now written back only while 1092 still describes the document's
guides (positions, directions and colours) and 1097 has as many entries;
otherwise both are left out and the file carries 1032 alone, as files
from before guides v2 do. Import takes the guides' own colours from 1092
(Photoshop's default Cyan stays with the preference colour), the read
half of #5967.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* TIFF: read and write CIE L*a*b* (CIELab, ICCLab); Lab documents stay Lab
Photoshop saves Lab documents as CIELab TIFFs (PhotometricInterpretation
8, a* and b* signed), which PhotoCraft could not open, and PhotoCraft
saved Lab documents as sRGB TIFFs.
- codecs: a Lab channel layout (Lab, LabA) holding a* and b* as
PhotoCraft's Lab documents do ((a + 128) / 255; 16 bits like the PSD
importer), with its own Lab <-> sRGB conversion (same formulas as
photocraft-color; codecs stays standalone) for formats without Lab,
which now warn LabConverted.
- TIFF read: CIELab and ICCLab (8 and 16 bits, alpha) are handed to the
tiff crate as RGB and labelled Lab; a* and b* are converted from the
file's encoding (signed a / 256a, or offset).
- TIFF write: Lab and LabA as CIELab, as Photoshop writes it; float Lab
is written with 16 bits (DepthReduced).
- io: a Lab TIFF opens as a Lab document; a Lab document with one plain
layer is written to TIFF in Lab (other formats still use sRGB).
Photoshop 2025's Lab TIFFs open with the colours Photoshop shows (its
own RGB conversion matches within one level at 8 bits and exactly at 16
bits), and Photoshop reads PhotoCraft's Lab TIFFs back with the same
L*a*b* values.
Fixes#4936
* PSD: a smart object's filter mask shows when the file opens
Photoshop stores a smart object's layer pixels with its filters applied
but not its filter mask. When it composites, it mixes the unfiltered
pixels (cached in FEid) back in through the mask. We showed the stored
pixels as they were, so a PSD whose smart filter has a mask opened with
the filter everywhere. Only after something re-rendered the smart object
did the mask appear, because our re-render mixes it.
- compose::filter_mask holds the mix, moved from the engine, and its
inverse.
- Import decodes the unfiltered pixels from FEid
(smart_map::unfiltered_from_item) and keeps the mixed result as the
smart object's pixels, as the engine's re-render does.
- Export writes the layer record the way Photoshop does: unmixed with
the unfiltered pixels it writes (or keeps) in FEid, so Photoshop mixes
back to what the document showed. Transparent pixels stay empty.
Photoshop oracles: sf-filter-mask-hard, sf-filter-mask-gradient and
sf-stack-blend-and-mask pass (145 -> 148 of 258); floor 145 -> 148.
psd-tools and io corpora unchanged.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* DNG: decode lossy (JPEG-compressed) DNG tiles (FILE-215-11)
DNG 1.4 lossy JPEG (compression 34892) stores each tile or strip as a
baseline-DCT JPEG of 8-bit samples: a gray stream for CFA data, a YCbCr
stream for three-sample LinearRaw. The decoder arm from #2021 read the
streams but widened every sample by 257, so the values no longer matched
the file's levels: an 8-bit WhiteLevel (or its default, 255) clipped
everything to white and a 256-entry LinearizationTable was indexed past
its end. It also required the JPEG frame to match the clipped row count,
which rejected the padded edge tiles real tiled files carry.
The arm is now `lossy_jpeg()` in sensor.rs. The decoded 8-bit values are
the stored samples, and BlackLevel, WhiteLevel (default 255 for 8-bit
data) and the LinearizationTable apply to them exactly as for every other
compression. A tile may be coded at the full tile size (edge tiles padded,
as the spec says) or at the image's row count; a strip at its row count;
the width must be the segment's. BitsPerSample must be 8 and the JPEG's
component count must equal SamplesPerPixel (1 or 3); anything else is an
error, never a silent conversion. The frame header is checked before any
pixel is decoded and the JPEG decoder's own size cap is the segment the
IFD declares (already charged against the limits), so a hostile SOF cannot
size a buffer past the tile.
testgen writes true 8-bit lossy fixtures (`LossyJpegTiles`, and strips via
the new `LossyJpegStrips`), accepts pre-encoded `lossy_segments` for
hostile-input tests, exposes `baseline_jpeg()`, and leaves WhiteLevel out
when `white` is 0. The DNG tests cover CFA and LinearRaw RGB from tiles
and strips at 37x23 (partial edge tiles, a short last strip), the default
white level, black/white scaling and a LinearizationTable against the
uncompressed path, and hostile inputs: a truncated tile, frame-size and
component-count mismatches, a 65535x65535 SOF under default and tight
limits, a tile over the allocation budget, and 12/16-bit or 4-sample
files. The hostile mutation set gains a lossy CFA and a lossy LinearRaw
file. The parity doc's DNG row is updated; the scorecard row is left for
the coordinating branch.
* Raw: measure the Nikon D90 image area (4288x2848 at (10, 10))
Aligning the decoded D90 sensor plane with the camera's own JPEG puts the
image at (10, 10) in the 4352x2868 sensor plane, giving the camera's
4288x2848 frame (10-pixel margins; the right border reads the camera's flat
255 from column 4310). Add the measured ImageArea so a D90 NEF opens on the
camera's frame instead of the uncropped plane, and make a measured profile
leave a file that carries its own colour calibration (a DNG) untouched.
* File > Save As / Save a Copy / CLI can write PDF: one flattened page with the embedded profile (#3401)
* Codecs: open Cineon (.cin) film frames read-only
Cineon is the 10-bit logarithmic film-scan format DPX grew from. Read it from
the same Kodak header family: the generic header (big-endian, orientation at
192, channel count at 193, the channel-1 bits/dimensions), one or three
channels, three 10-bit samples packed into each 32-bit word on a word
boundary. The 10-bit code values open as U16 (round(c x 65535 / 1023)); the
file's log black/white points are a display choice and are not applied. A
depth other than 10 bits or a channel count other than 1/3 is Unsupported;
truncation errors rather than panicking. Read-only (no Cineon writer), so
.cin joins the open filters and Cineon read closes part of #1049's G10 gap.
* Vector: bound flattening memory, keep over-budget dashes, cheaper edge build (#5195)
- flatten: a path's flattened points are capped at 1 << 20; past it every
curve keeps a proportional share of its pieces (at least one), so hostile
handles from files (vmsk, SVG, effect outlines) cannot exhaust memory.
fill_rasterizer flattens the whole path under one budget.
- stroke: past the dash step budget (or below coordinate precision),
dash_polyline keeps the dashes made so far and draws the rest solid
instead of dropping the stroke. Open polylines are no longer copied.
- raster: coordinates are clamped to +-1e15 and edges with a non-finite
slope (vanishingly short) are skipped, so huge finite coordinates no
longer produce NaN coverage. fill_rasterizer sorts edges once instead of
after every component (stable sort, identical order).
- Cleanups: dead miter `half`, dead loop-length check in trace_mask,
shared mask render body, map_knots helper, shared straight-segment test.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* PSD: cap pattern memory across a parse, reject mixed-depth pattern channels (#5198)
- Patterns: one PatternBudget (decoded bytes + zero padding) is shared by
every pattern of a block, a .pat file and the pattern blocks of one
document; .abr patt sections are charged to the samples' budget.
- Patterns: a channel whose depth differs from the first is rejected (the
parsed pattern could not be written back).
- Slices: descriptor numbers no longer wrap; out-of-range ids are no id,
coordinates clamp to i32, and a v6 trailing entry without a usable id
attaches its outsets to no slice.
- LayerInfo::unpadded_len is computed from field sizes instead of
serializing every record into a scratch buffer.
- abr desc presets are moved out instead of cloned; UnFl and shmd counts
use the bounded preallocation; ImageData::decode_channel (decoded every
plane to return one, unused outside its test) is removed.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Vector: bound stroke outline points (#5211)
- stroke_polygons dashes all lines first, then counts round caps and
joins. When their full-resolution tessellation would exceed 1 << 20
outline points, every round cap and join gets the same smaller segment
count (down to 4 per circle, 1 per join; area-exact radius kept).
Strokes under the budget are unchanged; no piece is dropped.
- The dash step budget (100000) is now shared by all lines of a stroke
instead of per polyline, so many subpaths cannot multiply the dash
(and cap) count. Past it the rest is drawn solid, as before.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* PSD: write tiff blocks without copies, inflate merged ZIP once
- ImageSourceData::to_bytes writes the global mask and global blocks
straight from the model with 4-byte alignment instead of cloning each
block (data included) to set its padding. Same bytes.
- The tiff transcoder's nested regions and blocks write into the parent's
buffer (taken and handed back, error or not) instead of building their
own output and copying it up per nesting level. Bodies that fail or are
not transcoded are truncated before being copied as stored or dropped.
Same bytes.
- PsdFile::from_bytes_and_merged decodes the merged image with the parse
when asked: a ZIP stream is inflated once (the decode's stream check is
the parse's); the parse-only check runs only when the decode fails, to
keep from_bytes' errors. PSD import uses it with merged_needed.
- PsdBuilder::composite documents that Gray/CMYK composites stay straight.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Content-Aware Fill: measure a thin hole by its thickness, not its bounds (#1366)
Removing long, thin objects (coiled guitar strings, wires) left their
outline as darker and lighter blotches and copied pieces of other strings
into the fill. The pyramid shrank until the hole's bounding box was four
patches across: for a string across the image that is a level where the
hole has swallowed its surroundings, so the matches found there copy
whatever looks like the blur, and the finer levels (refine-only for wide
bounds) keep them.
A hole at most a quarter as thick as its bounds are long now counts as
thin: the pyramid stops while it is still about two patches thick, and
that level starts from a membrane across it (over a few pixels, the
surroundings themselves) instead of the onion peel, whose exhaustive
search is what made a shallow pyramid unaffordable. Compact holes are
unchanged bit for bit.
Refs #1366
* perf(compose,gpu): effect caches reserve tile addresses instead of pinning layers
Effect map cache entries kept a clone of their layer (a deep clone for groups) so the tile addresses the cache key hashes couldn't be reused. That kept an edited or deleted layer's pixels alive, uncounted, until the entry was evicted. Keep a Weak to each hashed tile instead: it reserves the address without keeping the pixels. The GPU compositor's styled-group pins and shape-source tile snapshots do the same. Part of #4530.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* fix(history): count snapshot-only tiles against the history budget
History panel snapshots outlived every budget: a Merged Layers snapshot is a full flattened copy that neither the history budget, the GPU budget's document bytes nor Purge accounted for. Trim now counts the tiles only snapshots hold as fixed cost, the GPU budget includes them, and Purge > Histories no longer reports tiles a kept snapshot still holds as freed. Part of #4530.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Content-Aware Fill: every part of a thin selection keeps its surroundings (#1366)
Two more causes of ghosts when removing strings and the small knobs
selected with them:
* Auto sampling summarises the selection's surroundings by a few
clusters. Around a long selection those come from the strings'
surroundings, so a small part elsewhere (a tuning knob in a differently
coloured corner) lost its own surroundings and was filled from far away
in another colour. Around a thin selection the Auto area now always
reaches as far as the selection is thick.
* The membrane that starts a thin hole now starts a patch radius out, past
the anti-aliased fringe or halo that a selection drawn close to the
object leaves outside it.
Refs #1366
* Content-Aware Fill: peel a thin hole where that stays affordable (#1366)
Starting every thin hole from a membrane smoothed Spot Healing on film
grain (spot_healing_keeps_film_grain_through_overlapping_strokes: grain
9.0 against 12.1 around). The onion peel copies the grain; it was only
given up because its exhaustive search is too slow on the big level a
long thin hole stops at. It now starts the thin hole whenever hole cells
times sources stay within 2^28 comparisons, and the membrane only beyond.
Refs #1366
* Select Subject: keep subject parts coloured like the backdrop, leave enclosed gaps open
Users on #2788 reported Select Subject dropping clothes that are close in
colour to a plain wall and bridging the gap between an arm and the torso.
Both come from the same place: the saliency pass labels low-contrast parts
of the subject as background, the background colour model then learns
them and explains them away, and the final blind hole fill closes every
enclosed gap up to 5 % of the mask.
Two changes in crates/algo:
- A second GrabCut pass whose background model only knows the backdrop. A
colour model fitted to the image frame (minus a margin around the
salient blob, in case the subject runs out of the picture) marks every
pixel it explains as probable background; the blob and whatever the
backdrop cannot account for start as probable foreground. Only
components that touch the first pass's result survive.
- Hole filling that consults the colour models: specks (<= 0.2 % of the
mask) always fill, larger holes up to 5 % fill only when their pixels
fit the foreground model better than the background's.
Tests: two regressions (a cream-shouldered figure on a near-white wall
keeps its shoulders; a ring keeps its backdrop-coloured hole open), plus
ignored timing and picture-dump helpers. The 6 MP first run goes from
about 100 ms to about 200 ms on one core; the P29 repeat path is untouched.
* Keyboard shortcut sets: Set menu, New Set, Save, Delete, .kys Export and Summarize (K2)
Edit › Keyboard Shortcuts gets Photoshop's set management. A set is a saved copy of the
bindings (Preferences.shortcutSets, the one in use in shortcutSet; "" is PhotoCraft Defaults),
and the Set menu shows "(modified)" when the bindings differ from it. New Set…, Save and
Delete wait for OK like the rest of the dialog. Export… writes the dialog's bindings as a .kys
file (commands then tools, Photoshop's macOS key spelling), each row carrying our id as pc-id
so PhotoCraft imports its own sets back exactly, whatever the label; Summarize… writes
Photoshop's HTML list of every bound command by menu.
edit.keyboardShortcuts takes useSet (before the call's edits), saveSet, deleteSet, sets and
activeSet (after them), exportKys and summarize; every reply reports the sets, the set in use
and whether it is modified. Bad names, keys or counts are errors that change nothing.
* .kys import: tool keys and sets saved on Windows (K3)
Photoshop's <tool> rows now import: each matches our tool by name (our tool names are
Photoshop's) or by pc-id in sets PhotoCraft exported, and a letter other than the tool's own
becomes its override, while its own letter keeps the tool cycling with the others (#5036).
A set saved on Windows spells the primary modifier Ctrl where a Mac set writes Cmd and keeps
Control for the Control key. A set with no Cmd or Opt anywhere but some Ctrl is read as a
Windows set, its Ctrl as our Cmd: Ctrl+L is the Cmd+L default, not a Control-key override that
would also mean Control on a Mac. The import reports `windows`.
* cargo fmt the extension lists
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Gert Pellin <gert@pellin.be>
Co-authored-by: timothydaly1 <tadaly04@protonmail.com>
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
Co-authored-by: Fabio Lissi <fabio.lissi@gmail.com>
Co-authored-by: vangel76 <vangel1976@googlemail.com>
Co-authored-by: Finn Newick <finnnk@gmail.com>
Co-authored-by: Brandon Thomas <echelon@gmail.com>
Co-authored-by: Diego Chagas <drochachagas@gmail.com>
Co-authored-by: Tanish Manku <tmanku.dev@gmail.com>
* TIFF: read and write CIE L*a*b* (CIELab, ICCLab); Lab documents stay Lab
Photoshop saves Lab documents as CIELab TIFFs (PhotometricInterpretation
8, a* and b* signed), which PhotoCraft could not open, and PhotoCraft
saved Lab documents as sRGB TIFFs.
- codecs: a Lab channel layout (Lab, LabA) holding a* and b* as
PhotoCraft's Lab documents do ((a + 128) / 255; 16 bits like the PSD
importer), with its own Lab <-> sRGB conversion (same formulas as
photocraft-color; codecs stays standalone) for formats without Lab,
which now warn LabConverted.
- TIFF read: CIELab and ICCLab (8 and 16 bits, alpha) are handed to the
tiff crate as RGB and labelled Lab; a* and b* are converted from the
file's encoding (signed a / 256a, or offset).
- TIFF write: Lab and LabA as CIELab, as Photoshop writes it; float Lab
is written with 16 bits (DepthReduced).
- io: a Lab TIFF opens as a Lab document; a Lab document with one plain
layer is written to TIFF in Lab (other formats still use sRGB).
Photoshop 2025's Lab TIFFs open with the colours Photoshop shows (its
own RGB conversion matches within one level at 8 bits and exactly at 16
bits), and Photoshop reads PhotoCraft's Lab TIFFs back with the same
L*a*b* values.
Fixes#4936
* PSD: a smart object's filter mask shows when the file opens
Photoshop stores a smart object's layer pixels with its filters applied
but not its filter mask. When it composites, it mixes the unfiltered
pixels (cached in FEid) back in through the mask. We showed the stored
pixels as they were, so a PSD whose smart filter has a mask opened with
the filter everywhere. Only after something re-rendered the smart object
did the mask appear, because our re-render mixes it.
- compose::filter_mask holds the mix, moved from the engine, and its
inverse.
- Import decodes the unfiltered pixels from FEid
(smart_map::unfiltered_from_item) and keeps the mixed result as the
smart object's pixels, as the engine's re-render does.
- Export writes the layer record the way Photoshop does: unmixed with
the unfiltered pixels it writes (or keeps) in FEid, so Photoshop mixes
back to what the document showed. Transparent pixels stay empty.
Photoshop oracles: sf-filter-mask-hard, sf-filter-mask-gradient and
sf-stack-blend-and-mask pass (145 -> 148 of 258); floor 145 -> 148.
psd-tools and io corpora unchanged.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* DNG: decode lossy (JPEG-compressed) DNG tiles (FILE-215-11)
DNG 1.4 lossy JPEG (compression 34892) stores each tile or strip as a
baseline-DCT JPEG of 8-bit samples: a gray stream for CFA data, a YCbCr
stream for three-sample LinearRaw. The decoder arm from #2021 read the
streams but widened every sample by 257, so the values no longer matched
the file's levels: an 8-bit WhiteLevel (or its default, 255) clipped
everything to white and a 256-entry LinearizationTable was indexed past
its end. It also required the JPEG frame to match the clipped row count,
which rejected the padded edge tiles real tiled files carry.
The arm is now `lossy_jpeg()` in sensor.rs. The decoded 8-bit values are
the stored samples, and BlackLevel, WhiteLevel (default 255 for 8-bit
data) and the LinearizationTable apply to them exactly as for every other
compression. A tile may be coded at the full tile size (edge tiles padded,
as the spec says) or at the image's row count; a strip at its row count;
the width must be the segment's. BitsPerSample must be 8 and the JPEG's
component count must equal SamplesPerPixel (1 or 3); anything else is an
error, never a silent conversion. The frame header is checked before any
pixel is decoded and the JPEG decoder's own size cap is the segment the
IFD declares (already charged against the limits), so a hostile SOF cannot
size a buffer past the tile.
testgen writes true 8-bit lossy fixtures (`LossyJpegTiles`, and strips via
the new `LossyJpegStrips`), accepts pre-encoded `lossy_segments` for
hostile-input tests, exposes `baseline_jpeg()`, and leaves WhiteLevel out
when `white` is 0. The DNG tests cover CFA and LinearRaw RGB from tiles
and strips at 37x23 (partial edge tiles, a short last strip), the default
white level, black/white scaling and a LinearizationTable against the
uncompressed path, and hostile inputs: a truncated tile, frame-size and
component-count mismatches, a 65535x65535 SOF under default and tight
limits, a tile over the allocation budget, and 12/16-bit or 4-sample
files. The hostile mutation set gains a lossy CFA and a lossy LinearRaw
file. The parity doc's DNG row is updated; the scorecard row is left for
the coordinating branch.
* Raw: measure the Nikon D90 image area (4288x2848 at (10, 10))
Aligning the decoded D90 sensor plane with the camera's own JPEG puts the
image at (10, 10) in the 4352x2868 sensor plane, giving the camera's
4288x2848 frame (10-pixel margins; the right border reads the camera's flat
255 from column 4310). Add the measured ImageArea so a D90 NEF opens on the
camera's frame instead of the uncropped plane, and make a measured profile
leave a file that carries its own colour calibration (a DNG) untouched.
* Codecs: open Cineon (.cin) film frames read-only
Cineon is the 10-bit logarithmic film-scan format DPX grew from. Read it from
the same Kodak header family: the generic header (big-endian, orientation at
192, channel count at 193, the channel-1 bits/dimensions), one or three
channels, three 10-bit samples packed into each 32-bit word on a word
boundary. The 10-bit code values open as U16 (round(c x 65535 / 1023)); the
file's log black/white points are a display choice and are not applied. A
depth other than 10 bits or a channel count other than 1/3 is Unsupported;
truncation errors rather than panicking. Read-only (no Cineon writer), so
.cin joins the open filters and Cineon read closes part of #1049's G10 gap.
* Vector: bound flattening memory, keep over-budget dashes, cheaper edge build (#5195)
- flatten: a path's flattened points are capped at 1 << 20; past it every
curve keeps a proportional share of its pieces (at least one), so hostile
handles from files (vmsk, SVG, effect outlines) cannot exhaust memory.
fill_rasterizer flattens the whole path under one budget.
- stroke: past the dash step budget (or below coordinate precision),
dash_polyline keeps the dashes made so far and draws the rest solid
instead of dropping the stroke. Open polylines are no longer copied.
- raster: coordinates are clamped to +-1e15 and edges with a non-finite
slope (vanishingly short) are skipped, so huge finite coordinates no
longer produce NaN coverage. fill_rasterizer sorts edges once instead of
after every component (stable sort, identical order).
- Cleanups: dead miter `half`, dead loop-length check in trace_mask,
shared mask render body, map_knots helper, shared straight-segment test.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* PSD: cap pattern memory across a parse, reject mixed-depth pattern channels (#5198)
- Patterns: one PatternBudget (decoded bytes + zero padding) is shared by
every pattern of a block, a .pat file and the pattern blocks of one
document; .abr patt sections are charged to the samples' budget.
- Patterns: a channel whose depth differs from the first is rejected (the
parsed pattern could not be written back).
- Slices: descriptor numbers no longer wrap; out-of-range ids are no id,
coordinates clamp to i32, and a v6 trailing entry without a usable id
attaches its outsets to no slice.
- LayerInfo::unpadded_len is computed from field sizes instead of
serializing every record into a scratch buffer.
- abr desc presets are moved out instead of cloned; UnFl and shmd counts
use the bounded preallocation; ImageData::decode_channel (decoded every
plane to return one, unused outside its test) is removed.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Vector: bound stroke outline points (#5211)
- stroke_polygons dashes all lines first, then counts round caps and
joins. When their full-resolution tessellation would exceed 1 << 20
outline points, every round cap and join gets the same smaller segment
count (down to 4 per circle, 1 per join; area-exact radius kept).
Strokes under the budget are unchanged; no piece is dropped.
- The dash step budget (100000) is now shared by all lines of a stroke
instead of per polyline, so many subpaths cannot multiply the dash
(and cap) count. Past it the rest is drawn solid, as before.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* PSD: write tiff blocks without copies, inflate merged ZIP once
- ImageSourceData::to_bytes writes the global mask and global blocks
straight from the model with 4-byte alignment instead of cloning each
block (data included) to set its padding. Same bytes.
- The tiff transcoder's nested regions and blocks write into the parent's
buffer (taken and handed back, error or not) instead of building their
own output and copying it up per nesting level. Bodies that fail or are
not transcoded are truncated before being copied as stored or dropped.
Same bytes.
- PsdFile::from_bytes_and_merged decodes the merged image with the parse
when asked: a ZIP stream is inflated once (the decode's stream check is
the parse's); the parse-only check runs only when the decode fails, to
keep from_bytes' errors. PSD import uses it with merged_needed.
- PsdBuilder::composite documents that Gray/CMYK composites stay straight.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Content-Aware Fill: measure a thin hole by its thickness, not its bounds (#1366)
Removing long, thin objects (coiled guitar strings, wires) left their
outline as darker and lighter blotches and copied pieces of other strings
into the fill. The pyramid shrank until the hole's bounding box was four
patches across: for a string across the image that is a level where the
hole has swallowed its surroundings, so the matches found there copy
whatever looks like the blur, and the finer levels (refine-only for wide
bounds) keep them.
A hole at most a quarter as thick as its bounds are long now counts as
thin: the pyramid stops while it is still about two patches thick, and
that level starts from a membrane across it (over a few pixels, the
surroundings themselves) instead of the onion peel, whose exhaustive
search is what made a shallow pyramid unaffordable. Compact holes are
unchanged bit for bit.
Refs #1366
* perf(compose,gpu): effect caches reserve tile addresses instead of pinning layers
Effect map cache entries kept a clone of their layer (a deep clone for groups) so the tile addresses the cache key hashes couldn't be reused. That kept an edited or deleted layer's pixels alive, uncounted, until the entry was evicted. Keep a Weak to each hashed tile instead: it reserves the address without keeping the pixels. The GPU compositor's styled-group pins and shape-source tile snapshots do the same. Part of #4530.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* fix(history): count snapshot-only tiles against the history budget
History panel snapshots outlived every budget: a Merged Layers snapshot is a full flattened copy that neither the history budget, the GPU budget's document bytes nor Purge accounted for. Trim now counts the tiles only snapshots hold as fixed cost, the GPU budget includes them, and Purge > Histories no longer reports tiles a kept snapshot still holds as freed. Part of #4530.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Content-Aware Fill: every part of a thin selection keeps its surroundings (#1366)
Two more causes of ghosts when removing strings and the small knobs
selected with them:
* Auto sampling summarises the selection's surroundings by a few
clusters. Around a long selection those come from the strings'
surroundings, so a small part elsewhere (a tuning knob in a differently
coloured corner) lost its own surroundings and was filled from far away
in another colour. Around a thin selection the Auto area now always
reaches as far as the selection is thick.
* The membrane that starts a thin hole now starts a patch radius out, past
the anti-aliased fringe or halo that a selection drawn close to the
object leaves outside it.
Refs #1366
* Content-Aware Fill: peel a thin hole where that stays affordable (#1366)
Starting every thin hole from a membrane smoothed Spot Healing on film
grain (spot_healing_keeps_film_grain_through_overlapping_strokes: grain
9.0 against 12.1 around). The onion peel copies the grain; it was only
given up because its exhaustive search is too slow on the big level a
long thin hole stops at. It now starts the thin hole whenever hole cells
times sources stay within 2^28 comparisons, and the membrane only beyond.
Refs #1366
* Select Subject: keep subject parts coloured like the backdrop, leave enclosed gaps open
Users on #2788 reported Select Subject dropping clothes that are close in
colour to a plain wall and bridging the gap between an arm and the torso.
Both come from the same place: the saliency pass labels low-contrast parts
of the subject as background, the background colour model then learns
them and explains them away, and the final blind hole fill closes every
enclosed gap up to 5 % of the mask.
Two changes in crates/algo:
- A second GrabCut pass whose background model only knows the backdrop. A
colour model fitted to the image frame (minus a margin around the
salient blob, in case the subject runs out of the picture) marks every
pixel it explains as probable background; the blob and whatever the
backdrop cannot account for start as probable foreground. Only
components that touch the first pass's result survive.
- Hole filling that consults the colour models: specks (<= 0.2 % of the
mask) always fill, larger holes up to 5 % fill only when their pixels
fit the foreground model better than the background's.
Tests: two regressions (a cream-shouldered figure on a near-white wall
keeps its shoulders; a ring keeps its backdrop-coloured hole open), plus
ignored timing and picture-dump helpers. The 6 MP first run goes from
about 100 ms to about 200 ms on one core; the P29 repeat path is untouched.
* Keyboard shortcut sets: Set menu, New Set, Save, Delete, .kys Export and Summarize (K2)
Edit › Keyboard Shortcuts gets Photoshop's set management. A set is a saved copy of the
bindings (Preferences.shortcutSets, the one in use in shortcutSet; "" is PhotoCraft Defaults),
and the Set menu shows "(modified)" when the bindings differ from it. New Set…, Save and
Delete wait for OK like the rest of the dialog. Export… writes the dialog's bindings as a .kys
file (commands then tools, Photoshop's macOS key spelling), each row carrying our id as pc-id
so PhotoCraft imports its own sets back exactly, whatever the label; Summarize… writes
Photoshop's HTML list of every bound command by menu.
edit.keyboardShortcuts takes useSet (before the call's edits), saveSet, deleteSet, sets and
activeSet (after them), exportKys and summarize; every reply reports the sets, the set in use
and whether it is modified. Bad names, keys or counts are errors that change nothing.
* .kys import: tool keys and sets saved on Windows (K3)
Photoshop's <tool> rows now import: each matches our tool by name (our tool names are
Photoshop's) or by pc-id in sets PhotoCraft exported, and a letter other than the tool's own
becomes its override, while its own letter keeps the tool cycling with the others (#5036).
A set saved on Windows spells the primary modifier Ctrl where a Mac set writes Cmd and keeps
Control for the Control key. A set with no Cmd or Opt anywhere but some Ctrl is read as a
Windows set, its Ctrl as our Cmd: Ctrl+L is the Cmd+L default, not a Control-key override that
would also mean Control on a Mac. The import reports `windows`.
* cargo fmt the extension lists
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Gert Pellin <gert@pellin.be>
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
Co-authored-by: Fabio Lissi <fabio.lissi@gmail.com>
Co-authored-by: Vikram Bhaskaran <vikram.bhaskaran@outlook.com>
Co-authored-by: vangel76 <vangel1976@googlemail.com>
Co-authored-by: Finn Newick <finnnk@gmail.com>
Co-authored-by: Brandon Thomas <echelon@gmail.com>
Co-authored-by: Diego Chagas <drochachagas@gmail.com>
Co-authored-by: Tanish Manku <tmanku.dev@gmail.com>
* TIFF: read and write CIE L*a*b* (CIELab, ICCLab); Lab documents stay Lab
Photoshop saves Lab documents as CIELab TIFFs (PhotometricInterpretation
8, a* and b* signed), which PhotoCraft could not open, and PhotoCraft
saved Lab documents as sRGB TIFFs.
- codecs: a Lab channel layout (Lab, LabA) holding a* and b* as
PhotoCraft's Lab documents do ((a + 128) / 255; 16 bits like the PSD
importer), with its own Lab <-> sRGB conversion (same formulas as
photocraft-color; codecs stays standalone) for formats without Lab,
which now warn LabConverted.
- TIFF read: CIELab and ICCLab (8 and 16 bits, alpha) are handed to the
tiff crate as RGB and labelled Lab; a* and b* are converted from the
file's encoding (signed a / 256a, or offset).
- TIFF write: Lab and LabA as CIELab, as Photoshop writes it; float Lab
is written with 16 bits (DepthReduced).
- io: a Lab TIFF opens as a Lab document; a Lab document with one plain
layer is written to TIFF in Lab (other formats still use sRGB).
Photoshop 2025's Lab TIFFs open with the colours Photoshop shows (its
own RGB conversion matches within one level at 8 bits and exactly at 16
bits), and Photoshop reads PhotoCraft's Lab TIFFs back with the same
L*a*b* values.
Fixes#4936
* DNG: decode lossy (JPEG-compressed) DNG tiles (FILE-215-11)
DNG 1.4 lossy JPEG (compression 34892) stores each tile or strip as a
baseline-DCT JPEG of 8-bit samples: a gray stream for CFA data, a YCbCr
stream for three-sample LinearRaw. The decoder arm from #2021 read the
streams but widened every sample by 257, so the values no longer matched
the file's levels: an 8-bit WhiteLevel (or its default, 255) clipped
everything to white and a 256-entry LinearizationTable was indexed past
its end. It also required the JPEG frame to match the clipped row count,
which rejected the padded edge tiles real tiled files carry.
The arm is now `lossy_jpeg()` in sensor.rs. The decoded 8-bit values are
the stored samples, and BlackLevel, WhiteLevel (default 255 for 8-bit
data) and the LinearizationTable apply to them exactly as for every other
compression. A tile may be coded at the full tile size (edge tiles padded,
as the spec says) or at the image's row count; a strip at its row count;
the width must be the segment's. BitsPerSample must be 8 and the JPEG's
component count must equal SamplesPerPixel (1 or 3); anything else is an
error, never a silent conversion. The frame header is checked before any
pixel is decoded and the JPEG decoder's own size cap is the segment the
IFD declares (already charged against the limits), so a hostile SOF cannot
size a buffer past the tile.
testgen writes true 8-bit lossy fixtures (`LossyJpegTiles`, and strips via
the new `LossyJpegStrips`), accepts pre-encoded `lossy_segments` for
hostile-input tests, exposes `baseline_jpeg()`, and leaves WhiteLevel out
when `white` is 0. The DNG tests cover CFA and LinearRaw RGB from tiles
and strips at 37x23 (partial edge tiles, a short last strip), the default
white level, black/white scaling and a LinearizationTable against the
uncompressed path, and hostile inputs: a truncated tile, frame-size and
component-count mismatches, a 65535x65535 SOF under default and tight
limits, a tile over the allocation budget, and 12/16-bit or 4-sample
files. The hostile mutation set gains a lossy CFA and a lossy LinearRaw
file. The parity doc's DNG row is updated; the scorecard row is left for
the coordinating branch.
* Raw: measure the Nikon D90 image area (4288x2848 at (10, 10))
Aligning the decoded D90 sensor plane with the camera's own JPEG puts the
image at (10, 10) in the 4352x2868 sensor plane, giving the camera's
4288x2848 frame (10-pixel margins; the right border reads the camera's flat
255 from column 4310). Add the measured ImageArea so a D90 NEF opens on the
camera's frame instead of the uncropped plane, and make a measured profile
leave a file that carries its own colour calibration (a DNG) untouched.
* Codecs: open Cineon (.cin) film frames read-only
Cineon is the 10-bit logarithmic film-scan format DPX grew from. Read it from
the same Kodak header family: the generic header (big-endian, orientation at
192, channel count at 193, the channel-1 bits/dimensions), one or three
channels, three 10-bit samples packed into each 32-bit word on a word
boundary. The 10-bit code values open as U16 (round(c x 65535 / 1023)); the
file's log black/white points are a display choice and are not applied. A
depth other than 10 bits or a channel count other than 1/3 is Unsupported;
truncation errors rather than panicking. Read-only (no Cineon writer), so
.cin joins the open filters and Cineon read closes part of #1049's G10 gap.
* Vector: bound flattening memory, keep over-budget dashes, cheaper edge build (#5195)
- flatten: a path's flattened points are capped at 1 << 20; past it every
curve keeps a proportional share of its pieces (at least one), so hostile
handles from files (vmsk, SVG, effect outlines) cannot exhaust memory.
fill_rasterizer flattens the whole path under one budget.
- stroke: past the dash step budget (or below coordinate precision),
dash_polyline keeps the dashes made so far and draws the rest solid
instead of dropping the stroke. Open polylines are no longer copied.
- raster: coordinates are clamped to +-1e15 and edges with a non-finite
slope (vanishingly short) are skipped, so huge finite coordinates no
longer produce NaN coverage. fill_rasterizer sorts edges once instead of
after every component (stable sort, identical order).
- Cleanups: dead miter `half`, dead loop-length check in trace_mask,
shared mask render body, map_knots helper, shared straight-segment test.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* PSD: cap pattern memory across a parse, reject mixed-depth pattern channels (#5198)
- Patterns: one PatternBudget (decoded bytes + zero padding) is shared by
every pattern of a block, a .pat file and the pattern blocks of one
document; .abr patt sections are charged to the samples' budget.
- Patterns: a channel whose depth differs from the first is rejected (the
parsed pattern could not be written back).
- Slices: descriptor numbers no longer wrap; out-of-range ids are no id,
coordinates clamp to i32, and a v6 trailing entry without a usable id
attaches its outsets to no slice.
- LayerInfo::unpadded_len is computed from field sizes instead of
serializing every record into a scratch buffer.
- abr desc presets are moved out instead of cloned; UnFl and shmd counts
use the bounded preallocation; ImageData::decode_channel (decoded every
plane to return one, unused outside its test) is removed.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Vector: bound stroke outline points (#5211)
- stroke_polygons dashes all lines first, then counts round caps and
joins. When their full-resolution tessellation would exceed 1 << 20
outline points, every round cap and join gets the same smaller segment
count (down to 4 per circle, 1 per join; area-exact radius kept).
Strokes under the budget are unchanged; no piece is dropped.
- The dash step budget (100000) is now shared by all lines of a stroke
instead of per polyline, so many subpaths cannot multiply the dash
(and cap) count. Past it the rest is drawn solid, as before.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* PSD: write tiff blocks without copies, inflate merged ZIP once
- ImageSourceData::to_bytes writes the global mask and global blocks
straight from the model with 4-byte alignment instead of cloning each
block (data included) to set its padding. Same bytes.
- The tiff transcoder's nested regions and blocks write into the parent's
buffer (taken and handed back, error or not) instead of building their
own output and copying it up per nesting level. Bodies that fail or are
not transcoded are truncated before being copied as stored or dropped.
Same bytes.
- PsdFile::from_bytes_and_merged decodes the merged image with the parse
when asked: a ZIP stream is inflated once (the decode's stream check is
the parse's); the parse-only check runs only when the decode fails, to
keep from_bytes' errors. PSD import uses it with merged_needed.
- PsdBuilder::composite documents that Gray/CMYK composites stay straight.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Content-Aware Fill: measure a thin hole by its thickness, not its bounds (#1366)
Removing long, thin objects (coiled guitar strings, wires) left their
outline as darker and lighter blotches and copied pieces of other strings
into the fill. The pyramid shrank until the hole's bounding box was four
patches across: for a string across the image that is a level where the
hole has swallowed its surroundings, so the matches found there copy
whatever looks like the blur, and the finer levels (refine-only for wide
bounds) keep them.
A hole at most a quarter as thick as its bounds are long now counts as
thin: the pyramid stops while it is still about two patches thick, and
that level starts from a membrane across it (over a few pixels, the
surroundings themselves) instead of the onion peel, whose exhaustive
search is what made a shallow pyramid unaffordable. Compact holes are
unchanged bit for bit.
Refs #1366
* perf(compose,gpu): effect caches reserve tile addresses instead of pinning layers
Effect map cache entries kept a clone of their layer (a deep clone for groups) so the tile addresses the cache key hashes couldn't be reused. That kept an edited or deleted layer's pixels alive, uncounted, until the entry was evicted. Keep a Weak to each hashed tile instead: it reserves the address without keeping the pixels. The GPU compositor's styled-group pins and shape-source tile snapshots do the same. Part of #4530.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* fix(history): count snapshot-only tiles against the history budget
History panel snapshots outlived every budget: a Merged Layers snapshot is a full flattened copy that neither the history budget, the GPU budget's document bytes nor Purge accounted for. Trim now counts the tiles only snapshots hold as fixed cost, the GPU budget includes them, and Purge > Histories no longer reports tiles a kept snapshot still holds as freed. Part of #4530.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Content-Aware Fill: every part of a thin selection keeps its surroundings (#1366)
Two more causes of ghosts when removing strings and the small knobs
selected with them:
* Auto sampling summarises the selection's surroundings by a few
clusters. Around a long selection those come from the strings'
surroundings, so a small part elsewhere (a tuning knob in a differently
coloured corner) lost its own surroundings and was filled from far away
in another colour. Around a thin selection the Auto area now always
reaches as far as the selection is thick.
* The membrane that starts a thin hole now starts a patch radius out, past
the anti-aliased fringe or halo that a selection drawn close to the
object leaves outside it.
Refs #1366
* Content-Aware Fill: peel a thin hole where that stays affordable (#1366)
Starting every thin hole from a membrane smoothed Spot Healing on film
grain (spot_healing_keeps_film_grain_through_overlapping_strokes: grain
9.0 against 12.1 around). The onion peel copies the grain; it was only
given up because its exhaustive search is too slow on the big level a
long thin hole stops at. It now starts the thin hole whenever hole cells
times sources stay within 2^28 comparisons, and the membrane only beyond.
Refs #1366
* Select Subject: keep subject parts coloured like the backdrop, leave enclosed gaps open
Users on #2788 reported Select Subject dropping clothes that are close in
colour to a plain wall and bridging the gap between an arm and the torso.
Both come from the same place: the saliency pass labels low-contrast parts
of the subject as background, the background colour model then learns
them and explains them away, and the final blind hole fill closes every
enclosed gap up to 5 % of the mask.
Two changes in crates/algo:
- A second GrabCut pass whose background model only knows the backdrop. A
colour model fitted to the image frame (minus a margin around the
salient blob, in case the subject runs out of the picture) marks every
pixel it explains as probable background; the blob and whatever the
backdrop cannot account for start as probable foreground. Only
components that touch the first pass's result survive.
- Hole filling that consults the colour models: specks (<= 0.2 % of the
mask) always fill, larger holes up to 5 % fill only when their pixels
fit the foreground model better than the background's.
Tests: two regressions (a cream-shouldered figure on a near-white wall
keeps its shoulders; a ring keeps its backdrop-coloured hole open), plus
ignored timing and picture-dump helpers. The 6 MP first run goes from
about 100 ms to about 200 ms on one core; the P29 repeat path is untouched.
* Keyboard shortcut sets: Set menu, New Set, Save, Delete, .kys Export and Summarize (K2)
Edit › Keyboard Shortcuts gets Photoshop's set management. A set is a saved copy of the
bindings (Preferences.shortcutSets, the one in use in shortcutSet; "" is PhotoCraft Defaults),
and the Set menu shows "(modified)" when the bindings differ from it. New Set…, Save and
Delete wait for OK like the rest of the dialog. Export… writes the dialog's bindings as a .kys
file (commands then tools, Photoshop's macOS key spelling), each row carrying our id as pc-id
so PhotoCraft imports its own sets back exactly, whatever the label; Summarize… writes
Photoshop's HTML list of every bound command by menu.
edit.keyboardShortcuts takes useSet (before the call's edits), saveSet, deleteSet, sets and
activeSet (after them), exportKys and summarize; every reply reports the sets, the set in use
and whether it is modified. Bad names, keys or counts are errors that change nothing.
* .kys import: tool keys and sets saved on Windows (K3)
Photoshop's <tool> rows now import: each matches our tool by name (our tool names are
Photoshop's) or by pc-id in sets PhotoCraft exported, and a letter other than the tool's own
becomes its override, while its own letter keeps the tool cycling with the others (#5036).
A set saved on Windows spells the primary modifier Ctrl where a Mac set writes Cmd and keeps
Control for the Control key. A set with no Cmd or Opt anywhere but some Ctrl is read as a
Windows set, its Ctrl as our Cmd: Ctrl+L is the Cmd+L default, not a Control-key override that
would also mean Control on a Mac. The import reports `windows`.
* cargo fmt the extension lists
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Gert Pellin <gert@pellin.be>
Co-authored-by: Vikram Bhaskaran <vikram.bhaskaran@outlook.com>
Co-authored-by: vangel76 <vangel1976@googlemail.com>
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
Co-authored-by: Finn Newick <finnnk@gmail.com>
Co-authored-by: Brandon Thomas <echelon@gmail.com>
Co-authored-by: Diego Chagas <drochachagas@gmail.com>
Co-authored-by: Tanish Manku <tmanku.dev@gmail.com>
* Raw: measure the Nikon D90 image area (4288x2848 at (10, 10))
Aligning the decoded D90 sensor plane with the camera's own JPEG puts the
image at (10, 10) in the 4352x2868 sensor plane, giving the camera's
4288x2848 frame (10-pixel margins; the right border reads the camera's flat
255 from column 4310). Add the measured ImageArea so a D90 NEF opens on the
camera's frame instead of the uncropped plane, and make a measured profile
leave a file that carries its own colour calibration (a DNG) untouched.
* Codecs: open Cineon (.cin) film frames read-only
Cineon is the 10-bit logarithmic film-scan format DPX grew from. Read it from
the same Kodak header family: the generic header (big-endian, orientation at
192, channel count at 193, the channel-1 bits/dimensions), one or three
channels, three 10-bit samples packed into each 32-bit word on a word
boundary. The 10-bit code values open as U16 (round(c x 65535 / 1023)); the
file's log black/white points are a display choice and are not applied. A
depth other than 10 bits or a channel count other than 1/3 is Unsupported;
truncation errors rather than panicking. Read-only (no Cineon writer), so
.cin joins the open filters and Cineon read closes part of #1049's G10 gap.
* PSD: write tiff blocks without copies, inflate merged ZIP once
- ImageSourceData::to_bytes writes the global mask and global blocks
straight from the model with 4-byte alignment instead of cloning each
block (data included) to set its padding. Same bytes.
- The tiff transcoder's nested regions and blocks write into the parent's
buffer (taken and handed back, error or not) instead of building their
own output and copying it up per nesting level. Bodies that fail or are
not transcoded are truncated before being copied as stored or dropped.
Same bytes.
- PsdFile::from_bytes_and_merged decodes the merged image with the parse
when asked: a ZIP stream is inflated once (the decode's stream check is
the parse's); the parse-only check runs only when the decode fails, to
keep from_bytes' errors. PSD import uses it with merged_needed.
- PsdBuilder::composite documents that Gray/CMYK composites stay straight.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Keyboard shortcut sets: Set menu, New Set, Save, Delete, .kys Export and Summarize (K2)
Edit › Keyboard Shortcuts gets Photoshop's set management. A set is a saved copy of the
bindings (Preferences.shortcutSets, the one in use in shortcutSet; "" is PhotoCraft Defaults),
and the Set menu shows "(modified)" when the bindings differ from it. New Set…, Save and
Delete wait for OK like the rest of the dialog. Export… writes the dialog's bindings as a .kys
file (commands then tools, Photoshop's macOS key spelling), each row carrying our id as pc-id
so PhotoCraft imports its own sets back exactly, whatever the label; Summarize… writes
Photoshop's HTML list of every bound command by menu.
edit.keyboardShortcuts takes useSet (before the call's edits), saveSet, deleteSet, sets and
activeSet (after them), exportKys and summarize; every reply reports the sets, the set in use
and whether it is modified. Bad names, keys or counts are errors that change nothing.
* .kys import: tool keys and sets saved on Windows (K3)
Photoshop's <tool> rows now import: each matches our tool by name (our tool names are
Photoshop's) or by pc-id in sets PhotoCraft exported, and a letter other than the tool's own
becomes its override, while its own letter keeps the tool cycling with the others (#5036).
A set saved on Windows spells the primary modifier Ctrl where a Mac set writes Cmd and keeps
Control for the Control key. A set with no Cmd or Opt anywhere but some Ctrl is read as a
Windows set, its Ctrl as our Cmd: Ctrl+L is the Cmd+L default, not a Control-key override that
would also mean Control on a Mac. The import reports `windows`.
* cargo fmt the extension lists
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Vikram Bhaskaran <vikram.bhaskaran@outlook.com>
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
Co-authored-by: Brandon Thomas <echelon@gmail.com>
Co-authored-by: Tanish Manku <tmanku.dev@gmail.com>
* Raw: measure the Nikon D90 image area (4288x2848 at (10, 10))
Aligning the decoded D90 sensor plane with the camera's own JPEG puts the
image at (10, 10) in the 4352x2868 sensor plane, giving the camera's
4288x2848 frame (10-pixel margins; the right border reads the camera's flat
255 from column 4310). Add the measured ImageArea so a D90 NEF opens on the
camera's frame instead of the uncropped plane, and make a measured profile
leave a file that carries its own colour calibration (a DNG) untouched.
* Codecs: open Cineon (.cin) film frames read-only
Cineon is the 10-bit logarithmic film-scan format DPX grew from. Read it from
the same Kodak header family: the generic header (big-endian, orientation at
192, channel count at 193, the channel-1 bits/dimensions), one or three
channels, three 10-bit samples packed into each 32-bit word on a word
boundary. The 10-bit code values open as U16 (round(c x 65535 / 1023)); the
file's log black/white points are a display choice and are not applied. A
depth other than 10 bits or a channel count other than 1/3 is Unsupported;
truncation errors rather than panicking. Read-only (no Cineon writer), so
.cin joins the open filters and Cineon read closes part of #1049's G10 gap.
* cargo fmt the extension lists
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Brandon Thomas <echelon@gmail.com>
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
Aligning the decoded D90 sensor plane with the camera's own JPEG puts the
image at (10, 10) in the 4352x2868 sensor plane, giving the camera's
4288x2848 frame (10-pixel margins; the right border reads the camera's flat
255 from column 4310). Add the measured ImageArea so a D90 NEF opens on the
camera's frame instead of the uncropped plane, and make a measured profile
leave a file that carries its own colour calibration (a DNG) untouched.
Co-authored-by: Brandon Thomas <echelon@gmail.com>
As in Photoshop, with several layers selected (Shift-click with Auto-Select,
or the Move marquee) Show Transform Controls draws one frame around all of
them (the Background excluded) and outlines every selected shape layer.
Before, the frame showed only the active layer, so the other selected layers
had no feedback on the canvas. The frame joins the boxes Free Transform would
open on each layer (transform_frame), and it hides while a corner radius
widget is dragged.
Free Transform works on one layer, so the shared frame has no handles and a
press on it doesn't start Free Transform; a drag inside still moves every
selected layer.
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
Saving an Indexed Color document as BMP went through the ordinary RGB
path and wrote a 24-bit file, so the colour table was lost on reopen
(the PNG exporter already had a palette branch).
export_mode_specific now sends Indexed Color to BMP as well as PNG,
through a new encode_bmp_indexed that writes an 8-bit palette BMP with
the document's table. BMP has no transparency, so a transparent index
is written as its palette colour and the export says so.
bmp_palette returned the decoder's 256-entry padding, so a 3-colour BMP
reopened with 253 extra black entries. It now trims the table to the
colours the header declares.
A shape layer's path is its vector mask in Photoshop (Properties > Masks),
with its own vector-mask density and feather. PhotoCraft's ShapeLayer had
neither, so soft shapes could not be made, and stroked soft shapes from PSDs
lost both on import.
- doc: ShapeLayer gains `density` (0..1, default 1) and `feather` (px,
default 0).
- vector: the shape renderer applies them to the fill as a soft vector mask
(fill shows beyond the path at 1 - density; the feather is the vector
mask's Gaussian), so the shape's own pixels, the GPU (which samples them)
and the stroke/fill split all follow. The stroke stays crisp. The feather
blur moves from compose::masks to vector::feather and both share it and the
feathered area, so a shape and an equal vector mask render the same pixels.
- compose: soft shapes' bounds reach their fill, their layer effects follow
the soft alpha, and the split cache key includes density and feather.
- engine: `layer.vectorMask.edit` on a shape layer sets density/feather in one
history step (path/enabled/linked/invert are refused there); density is now
validated (finite 0..100) instead of clamped. `layer.vectorMask.info`
reports a shape's values.
- ui: Properties shows the Vector Mask Density and Feather sliders for a
selected shape layer in both themes (live drag, one undo per gesture).
- .pcraft: manifest and convert carry both with serde defaults (older files
load at 100 % and 0 px).
- PSD: export writes them as the vector density/feather mask parameters;
import reads them into the shape (re-rendered, as the stored pixels lack the
fill beyond the path). Soft unstroked solid/gradient shapes now import as
shapes instead of fill layers with a vector mask; pattern-filled ones stay
fill layers.
Photoshop's 10 px feather on a 100 px black square, row 100, x = 30..72:
ours is within 1 level of every measured value (8, 16 and 32 bits);
density 50 % shows 127/128 beyond the path and 0 inside.
Scorecard: TOOL-214-12 done.
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
Main has the marquee Shift+Alt intersect test (#3624), so the row no longer
says it is missing.
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
Layers picked with the Move tool (a click, Shift-click or its marquee) now
take a colour picked in the Color or Swatches panel or the Color Picker:
every selected type layer's colour and every selected shape's fill, in one
history step. The brushes, the pixel selection tools and the other tools
still change only the foreground.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
The merge of main (5a4df1a3) committed unresolved conflict markers in the
status lines of gaps.md, target-app-parity.md and ui-parity.md and in the
Type/Vector rows of target-app-parity.md. Keep main's text and add this
PR's own items back: G8 Warp Text preview done (TYPE-218-7), the Type
row's evidence, and the selection-modifier and Alt-wheel rows.
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>