pdfcraft/crates/filters

pdfcraft-filters

PDF stream filters: the decoders and encoders behind /Filter and /DecodeParms.

• Layer: L0, standalone. No dependency on any other PdfCraft crate. cos depends on it (architecture §3 rule 3).

• Licence: MIT OR Apache-2.0. Clean-room: written from ISO 32000-2 §7.4, RFC 1950/1951 (through flate2 with the pure-Rust miniz_oxide backend), TIFF 6.0 §14 (predictor 2) and RFC 2083 §6 (PNG filters). CCITT Group 4 encoding (ITU-T T.6) is the fax crate's (MIT, already in the tree through tiff), checked here by round trips through an independent decoder; CCITT decoding (T.4 and T.6) is the hayro-ccitt crate's, and JBIG2 decoding the hayro-jbig2 crate's (both MIT OR Apache-2.0, already in the tree through hayro), bounded here. JBIG2 generic region encoding is written from the public ISO/IEC 14492 Final Committee Draft (WG1 N1359, 1999); Annex H.2 checks the arithmetic coder byte for byte.

• #![forbid(unsafe_code)]. Builds for wasm32-unknown-unknown.

API

pub enum Filter { Flate, Lzw, AsciiHex, Ascii85, RunLength, Dct, Jpx, Jbig2, CcittFax, Crypt, Unknown(String) }
Filter::from_name(b"FlateDecode" | b"Fl" | ...) -> Filter   // full names and inline-image abbreviations
Filter::name(&self) -> &str; Filter::is_image_codec(&self) -> bool

pub struct Params { predictor, colors, bits_per_component, columns, early_change }  // i64s; Default = 1, 1, 8, 1, 1
pub enum FilterError { Corrupt { filter, detail }, LimitExceeded(usize), Unsupported(String), Spent }

decode(chain, data, max_output) -> Result<Vec<u8>, FilterError>
decode_counted(chain, data, max_output) -> Result<(Vec<u8>, usize /*decoded*/), (FilterError, usize /*decoded*/)>
decode_tolerant(chain, data, max_output) -> Result<(Vec<u8>, bool /*partial*/), FilterError>
decode_tolerant_counted(chain, data, max_output) -> Result<(Vec<u8>, bool /*partial*/, usize /*decoded*/), (FilterError, usize /*decoded*/)>
decode_tolerant_within(chain, data, max_output, work: &mut u64) -> Result<Vec<u8>, FilterError>
decode_within(chain, data, max_output, work: &mut u64) -> Result<Vec<u8>, FilterError>
encode(filter, params, data) -> Result<Vec<u8>, FilterError>
encode_flate(data) -> Vec<u8>   // zlib, level 6
encode_g4(data, columns, rows) -> Result<Vec<u8>, FilterError>   // 1-bit rows as CCITT Group 4; columns <= MAX_G4_COLUMNS
pub struct CcittParams { k, columns, rows, end_of_line, encoded_byte_align, end_of_block, black_is_1 }  // Table 11; Default = its defaults
decode_ccitt_within(data, &params, max_rows, work: &mut u64) -> Result<Vec<u8>, FilterError>   // CCITT fax as CCITTFaxDecode gives it; columns <= MAX_CCITT_COLUMNS; its rows paid for from work before they are decoded
decode_jbig2_within(data, globals, columns, rows, max, work: &mut u64) -> Result<Vec<u8>, FilterError>   // JBIG2 as JBIG2Decode gives it; a page of columns × rows, within max and MAX_JBIG2_PIXELS; reading and decoding it spend from work, in the decoder's steps
encode_jbig2_generic(data, columns, rows) -> Result<Vec<u8>, FilterError>   // 1-bit rows as lossless JBIG2 for JBIG2Decode; columns and rows <= MAX_JBIG2_COLUMNS (65,535) and MAX_JBIG2_PIXELS (2^28) samples, what the decoder takes
encode_jbig2(data, columns, rows) -> Result<Vec<u8>, FilterError>   // 1-bit rows as lossless JBIG2 for JBIG2Decode, symbol coded when that is smaller; the same limits
encode_jbig2_shared(&[(data, columns, rows)]) -> Result<Option<SharedJbig2>, FilterError>   // images symbol coded sharing one dictionary: the /JBIG2Globals data, and each image's stream or None; the same limits

• chain is applied first to last, as in a /Filter array.
• Image codecs (DCT, JPX, JBIG2, CCITT), Crypt and unknown filters anywhere in a chain give Unsupported: callers keep such data encoded. So does a chain longer than MAX_CHAIN (8) filters, before any stage runs. Decryption belongs to crypt.
• max_output bounds every intermediate buffer (including the pre-predictor buffer) and gives LimitExceeded(max_output). This also holds when Flate retries raw deflate after a misleading zlib header, in both strict and tolerant decoding.
• decode_counted and decode_tolerant_counted are for a caller charging a budget (pdfcraft_cos::DecodeBudget). max_output bounds all stages together (each stage gets what the earlier ones left), and they give the bytes every stage that ran decoded, on success and on failure. A stage's output counts as its decoder produced it, before a predictor or a later stage shrinks it, and a failed decode pays for what it decoded first.
• decode_tolerant_within is for a run of images (pdfcraft_cos::ImageBudget), as decode_within (its strict form), decode_jbig2_within and decode_ccitt_within are, all spending from one work, in the JBIG2 decoder's steps. max_output bounds each stage, as in decode_tolerant, and no stage decodes past what work has left. It pays a step a byte of data first and a step a byte each stage decodes, so a chain that fails has paid for what it did: 0.2 to 3 ns a byte in or out, up to 19 ns through a predictor on samples of a bit, against the 6 to 16 ns of a JBIG2 step. What work can't pay for spends all of it, and gives Spent; with nothing left nothing is read. A chain that can't be decoded at all costs nothing and gives its usual error.
• decode_tolerant turns Corrupt into "what was decoded so far" plus partial = true, then runs the rest of the chain on it (predictors are applied to partial output too). LimitExceeded and Unsupported are still errors.

Behaviour

Filter	Decode	Encode
FlateDecode	zlib header checked, then inflated raw: a missing or wrong Adler-32 is tolerated; no valid header → raw deflate; trailing bytes ignored; preset dictionary → Corrupt; truncated → Corrupt (partial in tolerant mode)	zlib level 6
LZWDecode	9–12-bit MSB-first codes, clear (256), EOD (257), EarlyChange 0/1; missing EOD/initial clear tolerated; a full table stops growing	greedy, leading clear, clear-table when the table fills, EOD
Predictors (Flate/LZW)	2 = TIFF (1/2/4/8/16 bpc), 10–15 = PNG with per-row tags 0–4; partial final rows decoded; bad params or tags → Corrupt	2, 10 None, 11 Sub, 12 Up, 13 Average, 14 Paeth, 15 per-row optimum (min sum of signed residuals)
ASCIIHexDecode	white space ignored, odd digit padded with 0, > EOD (optional), other characters → Corrupt	upper case, newline every 64 digits, >
ASCII85Decode	<~ prefix, z, white space, ~> (or bare ~, or none) EOD, final partial group; z inside a group, a 1-char final group, overflow or bad characters → Corrupt	z for zero groups, newline every 75 characters, ~>
RunLengthDecode	0–127 literal, 129–255 repeat, 128 EOD (optional); truncated run → Corrupt	runs of ≥2 repeat, literals up to 128, 128
CCITTFaxDecode	not in a chain (Unsupported); decode_ccitt_within decodes Group 3 and Group 4 on its own, as rows of 1-bit samples each on a new byte, black 0 unless black_is_1, at most max_rows rows (fewer with /Rows), the rows before any damage, up to 1,048,576 samples a row; Group 3 rows on bytes are read by their end-of-line codes when the data starts with one and on bytes otherwise, whatever end_of_line says, so data with codes but none before the first row (not as T.4 sends them) is read on bytes, as the renderer draws it, and at k 0 may come out as other rows (pdfcraft_cos::ImageBudget::decode calls it for a fax image, after the filters before it)	encode_g4: Group 4 (/K -1) with an end-of-block mark, 0 bits coded black so /BlackIs1 false decodes the same bits; rows packed MSB first, each on a new byte, padding bits and trailing bytes ignored; up to 32,767 samples a row (the encoder counts positions in 16 bits); no rows or columns, or too wide → Unsupported, too few bytes → Corrupt
JBIG2Decode	not in a chain (Unsupported); decode_jbig2_within decodes it on its own with hayro-jbig2, given what its /JBIG2Globals decode to, as rows of 1-bit samples each on a new byte, black 0; the page has to be columns × rows (PdfCraft's renderer draws the whole page into the image), within max bytes as such rows and 2^28 pixels (MAX_JBIG2_PIXELS, the most the decoder takes), checked before it is decoded; regions inside it are bounded by the decoder alone (a region may claim more pixels than its page); damaged data, or globals that don't decode, are Corrupt (pdfcraft_cos::ImageBudget::decode calls it for a JBIG2 image, after the filters before it)	encode_jbig2_generic: the embedded organisation (D.3) with a page information segment and an immediate lossless generic region (7.4.6), no /JBIG2Globals; template 0 with its nominal AT pixels and typical prediction (6.2.5), coded with the MQ arithmetic coder (Annex E, Table E.1) and ended by its 0xFF 0xAC marker. A 0 sample is coded as a JBIG2 1 (black), since JBIG2Decode gives black as 0, so the stream decodes to the same bits; rows packed MSB first, each on a new byte, padding bits and trailing bytes ignored; up to 65,535 samples on a side and 2^28 in all, where hayro-jbig2 stops; no rows or columns, or too large → Unsupported, too few bytes → Corrupt. encode_jbig2: the smaller of that and symbol coding (jbig2/symbols.rs): each distinct mark (8-connected black pixels, at most 256 a side) stored once in a symbol dictionary (7.4.2; arithmetic coded, each bitmap a template 0 generic region without typical prediction, the bitmaps sharing their contexts) and placed by immediate lossless text regions referring to it (7.4.3; bottom-left reference corner, strips of 1, 2, 4 or 8 rows, whichever is smallest), each of at most 10,000 instances over a band of rows, as the decoder PdfCraft renders with (hayro-jbig2) takes no more in one region, with larger marks, and in a second plan marks that occur once, in a generic region over their box. Only exact copies share a symbol (no refinement), so the stream decodes to the same bits; fewer than two symbols, more than 2^20 black runs, 65,536 distinct marks or 16 MiB of their pixels, and the generic coding is used; a plan of more than 32,767 symbols (that decoder refuses more) isn't made. encode_jbig2_shared: the marks found in more than one image of a group (at most 16,383, those in the most images first, within the same limits on distinct marks and their pixels as one image's) go once in a symbol dictionary segment associated with no page, number 0, which is the /JBIG2Globals data (7.2.6, D.3); each image's stream numbers its segments from 1 (a segment refers only to lower numbers, 7.2.5) and its text regions refer to that dictionary first, then to one of its own for the marks only it repeats, so the shared symbols' IDs come first (Table 31's SBSYMS); the rest is coded as encode_jbig2's symbol coding codes it, the smaller of its two plans. An image that places none of the shared marks gets no stream, to be stored alone; whether the rest save more than the globals take is the caller's to weigh

Tests

• Unit tests per filter with hand-computed vectors (the ISO 32000-2 LZW example, RFC 1951 stored blocks, PNG/TIFF rows).
• LZW is cross-checked against weezl (dev-dependency) in both directions for both early-change settings.
• tests/proptests.rs: encode→decode round trips for every encodable filter × predictor × colors × bpc × columns, two-filter chains, output-limit checks, and fuzz-style no-panic tests (random bytes, random/nonsense params, bit-flipped valid streams).
• ccitt.rs: decode_ccitt gives back the rows encode_g4 was given (with /BlackIs1, /Rows and a row limit), refuses bad widths, and bounds its output for any input; byte-aligned Group 3 in each layout, over 32 seeded pictures, decodes to its picture, and a byte short to fewer rows. Group 4 output decoded by hayro-ccitt (an independent decoder) matches the input bits: a text-like page, padding bits, the widest row, and property tests over bitmaps of noise and of runs; any input returns rather than panics.
• mq.rs: the arithmetic coder reproduces Annex H.2's 30 bytes from its 256 decisions.
• jbig2.rs: output decoded by hayro-jbig2 (dev-dependency, an independent decoder) matches the input bits: a text-like page (smaller than Group 4), edges, padding, all-white and all-black regions (typical rows), and property tests over bitmaps of noise and of runs; any input returns rather than panics.
• jbig2/decode.rs: decode_jbig2_within gives back the rows of both codings, padding bits 0; refuses a page of another width or height, past max or past MAX_JBIG2_PIXELS before decoding it (2^28 pixels take about 34 MB, a bit each), globals that aren't JBIG2 and damaged data, and returns rather than panics on every prefix of a stream.
• jbig2/symbols.rs: the integer coders against Annex A's example and Table A.1; symbol-coded output decoded by hayro-jbig2 matches the input bits for every plan and strip size: text whose letters repeat (under half the generic coding's size, the dictionary retained and referred to), large and lone marks left to a generic region, marks on the edges, touching at corners and inside each other's boxes, and property tests over glyphs scattered over each other and the edges with stray pixels (never larger than the generic coding); one shape, a blank page and noise are coded generically; marks joined at a corner, either way, are one mark, and 256 pixels a side is a symbol while 257 wide or tall is left out; black padding bits are ignored; coordinates past 4,435 use Annex A's 32-bit range and PREV stays below 512; past 2^20 runs, 65,536 distinct marks or 2^24 symbol pixels the image is coded generically, and at each cap it is still looked at; a plan codes at most 32,767 symbols, which decode, and past that the second plan still codes the repeated ones; more than 10,000 marks are placed by several text regions, numbered in turn, the dictionary retained for each but the last; pages in one font share one dictionary, segment 0 of no page, retained, which each page's text regions refer to first, taking less together than alone, a page's own repeated marks in a dictionary referred to after it, a page sharing nothing left alone, images with fewer than two marks in common sharing nothing, and past 16,383 shared marks those in the most images kept, with a property test over groups of scattered pages; any input returns rather than panics.
• fuzz/: a detached cargo-fuzz crate (cargo +nightly fuzz run decode, run from crates/filters/).

Status

M1.1/M1.2 for the general-purpose filters are done. Not yet here: the DCT and JPX decoders (DCT via zune-jpeg, JPX via hayro-jpeg2000), DCT encoding, CCITT Group 3 encoding and Flate encode levels other than 6.

Lossless symbol coding is also implemented: exact-copy dictionaries/text regions, bounded by the encoder; no approximate or lossy symbol substitution.