* M10 #5130: resolve Windows printer-default duplex before spooling
* M10 #5130: document printer duplex resolution
* M10 #5130: adopt DocumentDuplex driver fix from craft-print
* M10 #5130: adopt two-sided capability selection fix
* M10 #5130: update documented craft-print revision
* M10 #5130: fall back when Windows duplex defaults cannot be read
* fix(print): satisfy duplex review formatting and refresh shared pin
* Repin craft-print to craft-libs main (#411 and #133 merged); ask only the picked printer's driver for two-sided support
craft-libs b6b8a55b has #411 (DocumentDuplex) and #133 (two_sided(name)). The
Printer default support check now reads that one driver instead of listing
every printer's capabilities at submit time (#2192).
---------
Co-authored-by: robertobulltech <341520377+robertobulltech@users.noreply.github.com>
Co-authored-by: FredApps <153173854+FredApps@users.noreply.github.com>
* fix(print): M10 — Windows ya no cambia las letras de las fuentes TrueType incrustadas (#3132)
Un subconjunto TrueType incrustado numera sus glifos de nuevo (en el
subconjunto de Arial de ReportLab el espacio es el glifo 11; en la Arial
instalada, el 3). Al imprimir en Windows, Windows.Data.Pdf → Direct2D →
XPS conservaba esos números de glifo pero los dibujaba con la fuente
instalada del mismo nombre: «Revisión» salía como «Wj{nxn» y la «z» en
negrita como «Ä», tanto en las colas Brother como en la impresora Adobe PDF.
La copia que va a la cola de Windows renombra ahora cada programa
TrueType/OpenType incrustado como PdfCraftPrint<n>, en su tabla name
y en el PDF (/BaseFont, /FontName; el subconjunto conserva su etiqueta),
para que ninguna fuente instalada responda a ese nombre. Glifos,
codificaciones y /ToUnicode no cambian. CUPS y Guardar como PDF reciben
el PDF tal cual.
Tests: extremo a extremo con impose (la página se renderiza idéntica
antes y después, y el test falla sin el arreglo), fuentes que comparten
programa, Type 0, reescritura por plataforma de la tabla name y programas
dañados sin pánico. Falta comprobarlo en una impresora física con Windows.
Fixes#3132
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* fix(print): M10 — solo se renombran en el PDF las fuentes cuyo programa se reescribe (#3132)
Si PdfCraft no puede leer o reescribir un programa incrustado (no es un
sfnt, está dañado o pasa de 64 MiB), ahora conserva también su /BaseFont
y su /FontName. Un visor que tampoco pueda cargarlo seguirá eligiendo el
sustituto por el nombre original («Arial») en vez de por PdfCraftPrint<n>.
Si no queda ningún programa reescrito, el PDF va a la cola tal cual.
Lo señaló CodeRabbit en el PR #4098. Test nuevo:
a_program_that_cannot_be_rewritten_keeps_its_name_in_the_pdf_too (falla
con el comportamiento anterior).
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* fix(print): M10 — el renombrado de fuentes para Windows decodifica contra un presupuesto total (#3132)
Cada programa ya tenía un tope de 64 MiB, pero un PDF con muchos
programas distintos podía sumar mucho trabajo de descompresión al
imprimir. Ahora todo el renombrado comparte un DecodeBudget de 512 MiB,
el mecanismo que main acaba de introducir en print. Agotado el
presupuesto, los programas que faltan conservan su nombre, igual que uno
ilegible.
Test nuevo: programs_past_the_shared_decode_budget_keep_their_names
(falla si se decodifica sin presupuesto).
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* fix(print): M10 — también se renombran los CIDFont escritos dentro de su fuente Type 0 (#3132)
Si /DescendantFonts lleva el CIDFont como diccionario en línea (en el
propio Type 0 o en un objeto array aparte), el recorrido no llegaba a
él. Cuando compartía programa con otra fuente, el programa se renombraba,
pero el Type 0, el CIDFont y su descriptor seguían diciendo «Arial», y
Windows podía volver a cruzarlos con la Arial instalada. Ahora el Type 0
se trata en el mismo recorrido, sin el segundo que hacía type0_names: un
CIDFont en línea apunta su programa, y al renombrar se cambian el Type 0,
el CIDFont y su descriptor en línea.
Lo señaló CodeRabbit en el PR #4098. Test nuevo:
a_cidfont_written_inside_its_type0_font_is_renamed_with_it (falla sin el
arreglo).
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* fix(print): M10 — renamed_table ya no copia cada cadena de la tabla name (#3132)
renamed_table copiaba el texto de cada registro antes de comprobar el
tamaño del resultado: una tabla name de menos de 1 MB con 65.535
registros apuntando a una misma cadena de 65.535 bytes reservaba unos
4 GiB, y un fallo de reserva cierra el proceso al imprimir en Windows.
Ahora la tabla se lee entera sin copiar ningún texto (cada registro
guarda el offset y la longitud de origen) y después cada cadena distinta
se guarda una sola vez: los registros que compartían cadena la siguen
compartiendo y el almacén nunca pasa de lo que alcanzan los offsets de
16 bits. Una tabla que declara más registros de los que caben antes de
sus cadenas se rechaza de entrada.
Lo encontró RomanLis91 en el PR #4098. Tests nuevos:
records_that_share_one_string_keep_sharing_it (falla con el código
anterior) y a_name_table_claiming_more_records_than_fit_before_its_strings_is_refused.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
After a print to a printer, its paper, page sizing (Fit, Actual size,
Shrink, Custom %) and two-sided choice are remembered for that printer and
brought back when it is chosen. The printer printed to last is preselected
after a restart while it is listed, else the system default. Saved as
print_printers, most recent first, at most 32; malformed entries are skipped.
* M10: grayscale with Print as image prints on a driver that keeps no grayscale (#5806)
With Print as image and grayscale, PdfCraft renders the pages as grey
pictures itself, yet the job still asked the driver for grayscale. A
driver that keeps no grayscale setting, Microsoft Print to PDF among
them, made craft-print refuse the job ("the printer's driver did not
retain the requested grayscale; nothing was sent"), so even the grey
pictures never printed. The job now asks the driver for grayscale only
when the pages aren't grey pictures already
(print::driver_needs_grayscale), in the dialog and in doc_print.
The print.grayscale parity note and the doc_print as_image description
say so, and the note names what is still missing: vector pages to such
a driver are refused rather than printed in colour.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* M10: the grey-pictures test checks that the pictures are grey too (#5806)
The test checked that grey pictures don't ask the driver for grayscale,
but not that the pictures are grey. A change that dropped grayscale from
the dialog's raster settings, while the job still skipped the driver,
would have printed in colour with the test passing. It now asserts both.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: austin62jake <340374338+austin62jake@users.noreply.github.com>
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
Co-authored-by: FredApps <153173854+FredApps@users.noreply.github.com>
* M10: the Print dialog remembers two-sided, grayscale, collate, sizing and comments & forms (#2001)
Persist the choices that describe how this computer prints and restore
them on the next launch, under the names doc_print takes; copies, pages,
layout, orientation and the printer still start fresh for each job.
Those names now live in one place, pdfcraft_print::names, used by the
tool and the settings file. Settings are untrusted: an unknown name or a
custom scale outside the dialog's 1..=1000 % keeps the default.
Co-Authored-By: Claude Fable 5.1 <noreply@anthropic.com>
* M10: the Print dialog also remembers a booklet's binding side (#2707)
Acrobat keeps the booklet binding (left or right) between prints;
PdfCraft started at Left every time. It is now kept with the other
remembered print choices, named as doc_print names it, and an unknown
saved value keeps the default.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* M10: Print starts each job's copies, pages, layout and orientation afresh (#2001)
CodeRabbit on #2103: the README promised that copies, pages, layout and orientation
start fresh, but open_print carried them over through `..keep` within a session.
ISO 32000-2 Table 147 initialises these per document when the print dialog opens
(NumCopies "typically 1", PrintPageRange), so each opening now resets them to the
defaults (Selected pages still win when thumbnails are picked); two-sided,
grayscale, collate, sizing, Comments & forms, binding, the paper and the printer
picked last carry over as before. Two-sided names now include "printer" (leave it to
the printer, main's default since #2422), so that choice is remembered too.
main's paper-persistence test expected grayscale not to persist; it is one of the
remembered preferences.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* M10: a new print job also resets its layout's own options and leaves Label (#2001)
CodeRabbit on #2103: resetting the layout to Size kept pages per sheet, order, borders,
booklet subset and the poster options through `..keep`, so choosing Multiple again
brought back, say, a cut-and-stack order; and a job printed on Label went back to Size
without giving back the paper Label replaced. open_print now leaves Label through
set_handling (#3564) and resets the layout's own options with the rest of the job's
choices; the binding and sizing stay remembered. The README now says what resets on
each opening and what carries over.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* M10: the Print dialog also remembers Print as image and its resolution (#6392)
A printer that needs pictures keeps getting them after a restart: as_image and
dpi are saved with the other print preferences and restored, a resolution the
dialog doesn't offer keeping the default 300 dpi. The bad-settings checks move
to their own test.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01Pq7HyDBXygTf7jcqdsjcfn
---------
Co-authored-by: Claude Fable 5.1 <noreply@anthropic.com>
Co-authored-by: mtlcl410 <chuanlin@niar.org.tw>
- engine: the on_changes test's XfaRun literals set highlight; the script
runner reads its template before borrowing the live form for to_js; has_event
reads the paged live form, as the rest of the runner does, so focus scripts
find a page-master copy by its own SOM path.
- js: property reads compare and copy the shared (Arc<str>) node text, and the
property tests build XHost with its current signature.
- xfa: the Emitter test literal sets groups and used; a field split that is
undone also restores the names handed out; rustfmt on a merged import.
- parity: drop the use/usehref gap from form.xfa-dynamic, as prototypes are now
resolved before the template is parsed.
Eric Kaden
Hitesh
robertobulltech
ljkx
Ken Mantle
Joaquin ArellanoandClaude Opus 5.5
bflatastic