* M2: `info` lists the repairs made while opening, as Document Properties does (misc.cli-inspect)
`pdfcraft-cli info` now prints a `repairs` array: the notes about damage
repaired while opening that the app shows in Document Properties and
doc_info reports. It opens the document as the app does, once (the session
the dynamic XFA summary already used), so notes the app adds after reading
the objects, such as a page tree rebuilt from the pages found by scanning,
are listed too. A file the app cannot open for editing falls back to what
reading its objects repaired; a sound file prints an empty array.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01Pq7HyDBXygTf7jcqdsjcfn
* M2: `info` runs none of the document's scripts while inspecting it (misc.cli-inspect)
The session `info` opens to read the app's repair notes and the dynamic XFA
layout now has JavaScript turned off, so an XFA form's initialize and
calculate scripts, which the app runs on opening, do not run during
inspection of an untrusted file. Before this branch the session was opened
for dynamic XFA forms only, and their scripts ran there too.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01Pq7HyDBXygTf7jcqdsjcfn
* M2: `info` reads the standards and repairs from the session it opens, and a laid-out form keeps its repair notes (misc.cli-inspect)
`info` now takes the declared standards (`Document::standards`, as the
Standards panel reads them) and the repair notes from the session it
opened, and reads the file once more only when the app cannot open it.
When opening lays out a dynamic XFA form, or writes any other revision,
the notes about damage repaired while reading the file now stay with the
re-read document, so Document Properties and `info` both list them.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01Pq7HyCHD1R3rywQBPCHXZA
---------
Co-authored-by: mtlcl410 <chuanlin@niar.org.tw>
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* M10: Correct recognized text keeps the window's tabs and toolbar and shows the page (ocr.correct-recognized-text)
Scan & OCR > Correct recognized text drew the OCR Verify screen before
the tab strip and the mode bar and returned, so it took the whole
window: the tabs, menus and toolbar went away (on macOS the traffic
lights landed on the PAGES caption). Its source pane drew only a
document the screen had recognized itself, so opened on a document
(already searchable or not) it was blank until a run.
The screen now takes the document area under the tab strip and the
mode bar; the command palette shows over it too. Before a run, and
after a review is accepted or rejected, the source pane shows the
document in front at the page it is on. Another mode or the Home tab
puts the screen away, as Exit does; the command brings it back with
its review as it was. A run now shows the first page it reads (the
current page for that scope) instead of page 1.
Fixes#6485
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01Pq7HyDBXygTf7jcqdsjcfn
* M10: OCR Verify keeps its review when the document is closed and shows a page it read (ocr.correct-recognized-text)
- Closing a document whose OCR review is still open (File > Close, the tab's
Close, the snapshot bar's Close, Close all) brings the review forward with
a notice to accept or reject it first, instead of closing the document under it.
- After a run the source pane shows a page that was read, over one skipped for
its text; a run that read no pages keeps the page it was started on.
- PAGE shows the page's number over the document's page count.
- A cached preview of another document or page is dropped before rendering.
- The re-entry test checks a review and its correction survive another mode
and Correct recognized text.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01Pq7HyDBXygTf7jcqdsjcfn
* M10: OCR Verify holds Quit for an open review, lets a failed Accept be rejected, and survives a worker that cannot start (ocr.correct-recognized-text)
- Quit and closing the window bring a document under OCR review forward
with its review instead of exiting, as Close all does.
- Reject also throws away a reading whose Accept failed.
- A run or re-read whose worker thread cannot start leaves the screen
usable and an existing review as it was.
- A page preview that fails to render is not rendered again on every
repaint, only once the document changes.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01Pq7HyDBXygTf7jcqdsjcfn
* M10: the web build's leave warning asks while an OCR review is open (ocr.correct-recognized-text)
A browser reload or a closed tab cannot be held the way Close and Quit are,
so the beforeunload flag the web page reads now also counts an OCR review
that is not yet accepted or rejected, by the same check that holds Close all
and Quit.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01Pq7HyDBXygTf7jcqdsjcfn
* M10: keep LF line endings in the files the leave-warning change touched (ocr.correct-recognized-text)
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01Pq7HyDBXygTf7jcqdsjcfn
* M10: an OCR review holds a deferred close, a run on another document, and the embedding page's leave warning (ocr.correct-recognized-text)
A close that waited for a save checks again for an OCR review started
meanwhile: the reviewed document stays open, and Close all and Quit stop.
Run OCR on another document while a review is held is refused with a
notice, so the review keeps its corrections. The embedding page's
`host_dirty` hears an open review as work at risk, as the reload warning
does.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01Pq7HyCHD1R3rywQBPCHXZA
---------
Co-authored-by: mtlcl410 <chuanlin@niar.org.tw>
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
The web build downloads the OCR models the first time Recognize Text (or
Edit on a scanned page) needs them, installs the engine, and reads pages
in up to two Web Workers (apps/pdfcraft-ocr-worker) built with WebAssembly
SIMD, so the page keeps responding. The page prepares each page and sends
its image to an idle worker, which runs ocrs and sends the lines back.
Where no worker can start, the page reads with the installed engine.
Answers go back to the run that sent the page (ocr_route), so a single
run and a batch can overlap.
Recognize Text in Multiple Files on the web keeps main's skipped-files
bucket, low-confidence notes and cancel between files. Files chosen
before the models are in wait for them. A scan Edit finds while no engine
can read it waits for the models instead of counting as no scan.
Trunk builds the worker beside the app; `cargo xtask web-worker-link`
hashes its files and names it in index.html. The web zip ships the
models in models/.
* M9: redraw named-layer signature status layers
- /N drawing one Form that holds n1 and n3: n1, n3 and n4 redrawn for the state
- copies made once per original and state; originals never edited
- Lucide icons; captions in Helvetica, embedded Inter, or craft-fonts outlines
Signed-off-by: Chiranjeevi U <244287281+chiranjeevi-max@users.noreply.github.com>
* M9: draw signature states in the display copy, exports and print
- marks follow the bytes shown; a changed verdict redraws after a metadata edit
- background opens pick up the trust and captions current at commit
Signed-off-by: Chiranjeevi U <244287281+chiranjeevi-max@users.noreply.github.com>
* M9: status captions in the interface language
- the three captions in all 22 catalogues
- Signatures panel colours from sign::status_rgb
Signed-off-by: Chiranjeevi U <244287281+chiranjeevi-max@users.noreply.github.com>
* M9: signature badge in the widget's corner
- a quarter of the shorter side, 48pt cap; outline only under 32pt
- dropped for a drawn valid state; bottom-right where the appearance draws one
- sign_list reports verdict_shown; parity and roadmap
Signed-off-by: Chiranjeevi U <244287281+chiranjeevi-max@users.noreply.github.com>
* M9: keep Arabic signature captions in logical order
Pass raw RTL catalogue text to the signature appearance shaper so UAX #9 is applied exactly once. This keeps the rendered word order and exported /ActualText consistent.
Signed-off-by: Chiranjeevi U <244287281+chiranjeevi-max@users.noreply.github.com>
* M2: read /ActualText over painted paths and pictures
- A replacement that marks no glyph reads where it paints, cut to what is visible and along the way it is drawn.
- A span the page content leaves open ends before the annotations.
- OCR and scan field detection still count such a page as having no text of its own.
Signed-off-by: Chiranjeevi U <244287281+chiranjeevi-max@users.noreply.github.com>
* M8: redaction strips /ActualText around paint it clips
- A path or shading written again under a clip counts as changed, so a partly redacted word drawn as outlines leaves no name in the file.
Signed-off-by: Chiranjeevi U <244287281+chiranjeevi-max@users.noreply.github.com>
* M9: recognise only layer forms that draw n1 and n3
- Settle on the one form holding both first, then read its content once per call.
- Skip an /N that is its own layer form; copies keep the layer's /OC.
- A verdict counts as drawn when any visible widget shows it.
Signed-off-by: Chiranjeevi U <244287281+chiranjeevi-max@users.noreply.github.com>
* M9: keep the signature badge and redraw wherever a state changes
- The badge stays for every state; its mark sits bottom-right as the widget lies on the page.
- An edit that changes a verdict redraws every page; captions apply before startup files open.
- Print, the CLI's render and the repair log follow the display copy.
Signed-off-by: Chiranjeevi U <244287281+chiranjeevi-max@users.noreply.github.com>
* M9: restore the attribution usage the rebase dropped
- Usage lines for the three icons, Inter and the craft-fonts input; ATTRIBUTION.md rebuilt from them.
- Roadmap and localization notes for this round.
Signed-off-by: Chiranjeevi U <244287281+chiranjeevi-max@users.noreply.github.com>
* M9: pin signature field names on a nested form
Signed-off-by: Chiranjeevi U <244287281+chiranjeevi-max@users.noreply.github.com>
* M9: bound the signature field walk
- kids share their parent's name and type instead of each copying them
- a widget stays listed under every field that claims it, as one shared copy
- a field written in place in a shared /Kids array is walked once
- caps of 20,000 fields, 100,000 entries and 4096-byte names; no states drawn past them
Signed-off-by: Chiranjeevi U <244287281+chiranjeevi-max@users.noreply.github.com>
* M9: keep a document signed when the field walk stops early
- list_cached adds a signed row of unknown validity for the fields the walk didn't read
- Save As and actions then append, and Optimize, Sanitize and full rewrites are refused, as for any signed file
Signed-off-by: Chiranjeevi U <244287281+chiranjeevi-max@users.noreply.github.com>
* M8: removing hidden content no longer strips the names of shadings
- With no regions to clip, a shading is left alone instead of wrapped and marked clipped
- clean_replacements skips scopes already marked, so deep nesting stays linear
Signed-off-by: Chiranjeevi U <244287281+chiranjeevi-max@users.noreply.github.com>
* M2: read a picture's /ActualText over the whole picture
- draw_image's transform maps pixels, not a unit square, so the text sat on one pixel in the corner; the test now draws a 2x2 picture
- Painted grows in place instead of being copied through an Option
Signed-off-by: Chiranjeevi U <244287281+chiranjeevi-max@users.noreply.github.com>
* M9: cap the bytes of names the signature field walk keeps
- A kid's name repeats its parent's, so one long name over 20,000 kids came to 80 MB; the walk now stops at 4 MiB of names and counts the rest as unread
- Cover the widget written into a shared /Kids array and the field cap among kids, which no test caught
- sig_fields is private again, and the cap docs say what happens past each cap
Signed-off-by: Chiranjeevi U <244287281+chiranjeevi-max@users.noreply.github.com>
* M9: skip status-layer work that changes nothing; fix tests that could not fail
- show_status_layers and has_status_layers return before reading the form when nothing is signed, so an unsigned form no longer walks every field on each edit
- revalidate and draw_captions leave documents with no drawn state alone, and no longer copy the signature list to update it
- Scan form detection reads the page's text once; comment and badge tips share one hover rule
- Tests: drop a table row that repeated another, stop taking an expectation from the code under test, stop comparing an Arc with itself, give bare asserts messages
Signed-off-by: Chiranjeevi U <244287281+chiranjeevi-max@users.noreply.github.com>
* M9: test the signature field name cap at the engine boundary
- A 4,096-byte name is read and blocks a full rewrite; at 4,097 bytes the list holds the unread-fields row and a full rewrite is still refused
Signed-off-by: Chiranjeevi U <244287281+chiranjeevi-max@users.noreply.github.com>
* M9: test signature states beside fields the viewer draws
- One display copy holds both a field's drawn appearance and the signature's state.
Signed-off-by: Chiranjeevi U <244287281+chiranjeevi-max@users.noreply.github.com>
* M9: draw Thai and Devanagari status captions in their own script
- script_of names Thai and Devanagari, so a craft-fonts face meant for either draws the caption as outlines; without one it stays English.
- Localization, parity and the craft-fonts usage line list the new scripts.
Signed-off-by: Chiranjeevi U <244287281+chiranjeevi-max@users.noreply.github.com>
* M2: paint left out by an exclusion mixes its /ActualText replacement
- A replacement placed by outlines or pictures, some of them excluded, fails filtered extraction as one with excluded glyphs does.
- Glyphs still place a replacement that has them.
Signed-off-by: Chiranjeevi U <244287281+chiranjeevi-max@users.noreply.github.com>
* M9: a long-named field that can't hold a signature leaves the walk whole
- A leaf of another type passed over for its name is no signature field and has none below it, so an unsigned form stays unsigned.
- A signature field, or any field with kids, still counts as unread.
Signed-off-by: Chiranjeevi U <244287281+chiranjeevi-max@users.noreply.github.com>
* M9: status captions use document faces only
- Each script takes the face PdfCraft writes it into documents with, so Chinese stays English although the pinned craft-fonts' interface-only Chinese face is meant for Hani.
- The craft-fonts usage line names Devanagari: the pinned revision has a face for it, and Hindi captions are drawn in it.
Signed-off-by: Chiranjeevi U <244287281+chiranjeevi-max@users.noreply.github.com>
* M9: refuse a new signature field the field walk can't read back
- Signing adds a field only when the walk reads the whole form with it: past a cap the signature would be listed as unread fields, and its name could repeat an unread field's.
- A field the walk already reads is signed as before.
Signed-off-by: Chiranjeevi U <244287281+chiranjeevi-max@users.noreply.github.com>
* M9: refuse a new signature field with a blank name
- The walk lists no field without a name, so signing now also requires the walk to list the new field: one named only with spaces or NULs would be a signature nothing shows.
Signed-off-by: Chiranjeevi U <244287281+chiranjeevi-max@users.noreply.github.com>
* M9: an unnamed signed field or an unreadable form counts as unread
- A signed field with no usable /T, or an /AcroForm or /Fields of the wrong type, cuts the field walk short: the document keeps its unread-fields row and stays signed.
- Signing refuses a blank new field name before it adds the field, so the refusal still says why.
Signed-off-by: Chiranjeevi U <244287281+chiranjeevi-max@users.noreply.github.com>
* M9: no display copy when no signature state is drawn
- display_bytes_for makes a copy only when it added an appearance or drew a state, as the app does.
Signed-off-by: Chiranjeevi U <244287281+chiranjeevi-max@users.noreply.github.com>
* M9: the verdict mark stays on the page
- A widget past the crop box takes its mark in the part on the page, or none when too little of it is there.
Signed-off-by: Chiranjeevi U <244287281+chiranjeevi-max@users.noreply.github.com>
* M9: typed values stay drawn while a signature redraws every page
- A form edit that changes a signature's state puts its values back in unbaked after the pages are invalidated.
Signed-off-by: Chiranjeevi U <244287281+chiranjeevi-max@users.noreply.github.com>
* M9: the action, Save As and shading tests check their effects
- The signed action and Save As tests reopen the output for the title and the comment; the shading test checks its clip.
Signed-off-by: Chiranjeevi U <244287281+chiranjeevi-max@users.noreply.github.com>
* M9: values typed earlier stay drawn while a signature redraws every page
- A form edit that changes a signature's state keeps every value still waiting on its page, not only its own.
Signed-off-by: Chiranjeevi U <244287281+chiranjeevi-max@users.noreply.github.com>
* M9: comment and content edits keep typed values drawn too
- An edit to one page's comments or content that changes a signature's state moves no page, so the values still waiting on their pages stay pending, as after a form edit.
- The pending-value test runs a field deletion and a comment after a fill, under a certification that allows the fill; its messages say what it checks.
Signed-off-by: Chiranjeevi U <244287281+chiranjeevi-max@users.noreply.github.com>
* M9: the language-change test skips without catalogs
- Like the other language tests, it returns early when the build has no craft-i18n catalogs.
Signed-off-by: Chiranjeevi U <244287281+chiranjeevi-max@users.noreply.github.com>
* M9: signed fields behind kids without a name count
- A kid with no /T but kids of its own is walked as a field node, so a signed field under it is listed by its full name.
- An unnamed kid claiming a signature its field doesn't have cuts the walk short, so the document stays signed and keeps its unread-fields row.
Signed-off-by: Chiranjeevi U <244287281+chiranjeevi-max@users.noreply.github.com>
---------
Signed-off-by: Chiranjeevi U <244287281+chiranjeevi-max@users.noreply.github.com>
The fallback to the glyph procedures' d0/d1 widths keeps such a page
readable, but ISO 32000-2 Table 110 requires /Widths in a Type 3 font,
so the reader should also be told the font is malformed. Selecting a
Type 3 font without /Widths (or /FirstChar, /LastChar) now reports
InterpreterWarning::Type3WidthsMissing, surfaced once per page as
RenderWarning::Type3WidthsMissing: `pdfcraft-cli render` prints it and the
automation render tools list it with the page's other warnings.
Test: raster::tests::type3_proc_widths::a_type3_font_without_widths_is_reported
(fails with the report switched off).
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01Pq7HyCHD1R3rywQBPCHXZA
?control attaches the UI control channel (the one --control serves) and installs window.pdfcraft: request, execute (ui.command), commands (ui.commands), docInspect (ui.state), uiInspect (ui.inspect) and screenshot. The channel keeps the accessibility tree of every frame, so it stays off unless the page asks. Opening, saving, the file name and the unsaved flag stay with the host messages.
* M10.20: plan Unicode text for OCR output in Type3 faces (fonts, edit)
OCR output used to flatten every character beyond WinAnsi to a silent `?`. This
adds the two pieces that let the OCR layers write the recognized words as they
are; the OCR code that uses them follows in M10.21.
pdfcraft-fonts
- `TextPlan::for_words` maps each word to the standard Helvetica when WinAnsi
covers it, else to Type3 fonts drawn from the craft-fonts faces (the Japanese
document face first, then the rest of the build input). Characters no face
has a glyph for are counted (`missing`), never dropped silently. At most 240
characters per font and 2400 per plan, so one hostile word cannot balloon.
- Which face has which character is asked once per (face, character) for a plan,
not once per word.
- `face_has`, `craft_glyph`, `win_ansi_char`, `fits_win_ansi` are public for it.
pdfcraft-edit
- `add_type3_fonts` / `stamp_with_fonts` register a plan's fonts on a page under
a free `PCOcr`, `PCOcr1`, ... name, build each font once and share the object
with later pages. A shared face is registered under a free name on a later
page that already has a font of the name it was given first, instead of
replacing that page's own font.
- The fonts carry real advances and a ToUnicode CMap, so extraction reads the
text back.
pdfcraft-redact
- A test shows a hand-built Type3 text layer (the shape the OCR output writes) is
redacted like any other text and the verifier passes.
Tests: pdfcraft-fonts 62 passed, pdfcraft-edit 129 passed, pdfcraft-redact 33
passed; clippy -D warnings clean on the three crates. The name-reuse and the
redaction tests build their fonts by hand, so they run without the craft-fonts
build input; the tests that plan real faces skip without it and were not run in
this commit's own check.
* M12: give the hostile-XFA open test more room on a loaded machine
The test opens a form whose calculate script sets a value 50 000 times, against
the one-second budget of an unasked script and a five-second wall-clock bound
on the open. Both sit close to what a machine running several suites at once
can take, so the test can fail without anything being wrong.
It now runs 20 000 iterations (the total is 19999) and allows 30 seconds, which
still fails for a script that hangs or is not capped. Test-only; unrelated to
the OCR work in this series, so it is a commit of its own.
Tests: both hostile_xfa tests in pdfcraft-engine pass.
* M10.21: pluggable OCR engines, preprocessing, review sessions and the OCR tools (ocr, engine, create, automation)
Scan & OCR gets a second engine, optional raster clean-up, a review step before
anything is applied, editable output and a batch mode, headlessly first: the
interface for them follows in M10.22.
pdfcraft-ocr
- A `Recognizer` trait with two engines: the built-in ocrs (moved out of lib.rs)
and the installed tesseract program, run as a fenced external process: fixed
argv, allow-listed language codes, a private temp directory (mode 0700 on
Unix), 120 s timeout, 64 MiB output cap, 50 000-word reading cap. A location
from PDFCRAFT_TESSERACT is validated (absolute, existing, executable) and an
invalid one fails closed instead of falling back to the PATH. `--list-langs`
and `--version` are read from stdout or, for older versions, stderr.
- Strategies: PrimaryOnly, ConfidenceWeighted (the second engine joins when the
first reading's mean is under 70 or unknown) and a ROVER merge (higher
confidence wins per word; against an ocrs word of unknown confidence a
tesseract word wins only at 70 or more; capped at 100 M comparisons; a failing
partner degrades to the primary with a note).
- Preprocessing: opt-in auto-rotate, deskew, denoise and binarize on the RGBA
raster, each with an exact inverse so word boxes map back to the scan. The
300 dpi normalization the steps are calibrated for runs only when a step is
on: with every step off the render is read as rendered, as before. (Enlarging
a 72 dpi render 4x on its own made the models read "due: €250" as "ue: ?250".)
`OcrImage` is validated by construction (side and 64 MP area caps, checked
before any buffer is allocated, including by the resize).
- Confidence bands (High >= 90, Medium 70-89, Low < 70) drive review.
pdfcraft-engine, pdfcraft-create
- `OcrSettings` gains engine, strategy, the four steps, output mode, region, the
skip flags and the low-confidence threshold; Automatic reads confidence
weighted unless a strategy is chosen.
- A recognition is a session: the document guard refuses a stale result with its
reason, pages can be applied one at a time (the guard is taken again after each
applied page), and applying is one undoable step. A per-language dictionary
(a plain-text file: words added from any document stay on disk after it closes).
- Output is searchable (an invisible layer) or a NEW editable document of visible
text at the recognized boxes (`create::from_contents`); words beyond WinAnsi use
the Type3 faces of M10.20 in both, with the shared plan across pages.
- Engine discovery never blocks the interface: results are cached, a stale
answer is shown while a background probe retries, and the models search and
`--version` are cached. Batch: pages or files that already have text are
skipped unless forced, and inputs sharing a file name are found up front.
pdfcraft-automation
- ocr_recognize (engine, strategy, steps, region, output mode), ocr_words (with a
retained review handle), ocr_review_apply, ocr_dictionary, ocr_status and
ocr_recognize_files. The editable `out` must be a new file inside --root and is
refused for a searchable run (it used to be ignored), two batch inputs of one
file name are refused before anything is read, and the batch folder is checked
for existing outputs.
pdfcraft-ui-egui
- Only what the new API needs: the Recognize Text dialog reads with
`recognizers(&settings)`. `ocr.correct` is registered with its label in every
catalog; the screen itself is M10.22.
Tests: pdfcraft-ocr 78 passed; pdfcraft-create passed; pdfcraft-engine and
pdfcraft-automation 450 passed and 1 failed (the automation lib 17, automation.rs
157, hostile_args 2 among them); pdfcraft-ui-egui lib + ocr + control tests 391
passed; clippy -D warnings clean on the five crates. The one failure is in a
test this commit does not change:
recognize_text_makes_a_scanned_page_searchable fails where the models are
installed (they read "quick" as "auick" at that render size); the roadmap on main
already records it. The real tesseract binary ran in
tesseract::tests::recognize_runs_the_installed_binary (tesseract 5.4.0, PATH).
* M10.22: OCR Verify screen, the Recognize Text options and the interface catalogs (ui-egui)
Scan & OCR ▸ Correct recognized text: a full-window screen where a recognition
is reviewed before anything is applied, plus the dialog and batch options for
the engines of M10.21.
OCR Verify screen
- Four panes: the page list, the source page with confidence-coloured word boxes
(click to select, drag to draw a region), the recognized text, and a zoom plus
word inspector. Corrections commit on Enter (an empty commit removes the word),
Remove/Restore, "+ Dictionary" (a per-language file in the preferences folder,
so a word added from a document stays on disk after it closes), per-word and
per-page Verified, F8 / Shift+F8 walk the low-confidence words, Ctrl+T marks the
page reviewed, Ctrl+Tab moves the pane focus, and review edits undo within the
panel.
- Re-OCR of the whole page or a drawn region. A region re-read moves the review
marks of the words it keeps to their new positions and selects the first new
word; a whole-page re-read clears that page's marks (and the undo brings them
back). The region outline is scaled onto the pane, not mapped through user
space again, so it is right on rotated and cropped pages.
- Accept / Reject per page or whole. Pages accepted one at a time each apply once
(the document guard is taken again after each applied page; an edit made
elsewhere in between is still refused with its reason), and Accept in
searchable mode is one undoable step. Editable mode writes a NEW
`<name>_ocr.pdf` through a save dialog and never the source. A real Cancel
keeps the pages already read.
- The engine and strategy menus disable a choice that cannot run and say why;
the check never waits on a process (a background probe fills a cache), and
choosing Automatic moves "Primary only" to Confidence weighted.
Recognize Text dialog and batch
- Engine, strategy, the four clean-up steps and the skip flags are remembered with
the other choices (a saved Automatic without a strategy reads confidence
weighted). The batch refuses two inputs of one file name and existing outputs
before reading anything, notes low-confidence pages at the settings' threshold,
and its toast has a Cancel (the file in flight finishes).
Catalogs and attribution
- The 90 new interface strings are in all 21 catalogs (the Lithuanian ones were
written without native review, and the Bulgarian ones avoid U+045D, which the
bundled monospace face lacks). ATTRIBUTION.toml carries the new hashes, a
note on the Lithuanian entries and the README screenshot; ATTRIBUTION.md is
regenerated.
- README: a screenshot of the Verify screen, taken with
`cargo xtask screenshots` from a synthetic scan (`shot --ocr-verify on`) built
from allowed assets; the page reads it with the real engines.
Tests: pdfcraft-ui-egui lib 373 passed (1 ignored: the Windows hinting
measurement probe), tests ocr 6, control 46, fonts 9; clippy -D warnings clean on
the engine, ui-egui, pdfcraft and xtask packages; `cargo xtask assets` ok. The
review state machine has unit tests for every fix above; each was seen failing
with its fix reverted.
* M10.23: parity entries, roadmap and localization notes for the OCR workflow
Records what M10.20-M10.22 ship, and what they do not.
parity/acrobat-features.toml
- Status changes against main: ocr.rotation-detection and ocr.deskew planned ->
shipped (the opt-in steps of M10.21, with their tests); ocr.correct-recognized-
text and ocr.ocr-engines planned -> partial. Other Area I entries get their
evidence and notes brought up to date.
- ocr.correct-recognized-text: the evidence includes the one-page-at-a-time accept
and the region re-read tests; the notes say what the headless tools cover
(ocr_words with a retained review, ocr_review_apply through the same stale-
document guard, ocr_dictionary) and what is still UI-only (suggestions,
per-word Verified marks, region re-reads).
- ocr.ocr-engines stays partial rather than shipped: part of its evidence is
conditional (the real-binary test runs only where tesseract is installed and
skips elsewhere, and the process-level tests are Unix-only). It cites the tests
that always run (location validation and the fail-closed rule, --list-langs
parsing from stdout or stderr, the merge rules, the default strategy) and says
which part is not proven everywhere.
- `cargo xtask parity`: area I 32.7% -> 44.2% weighted (5 -> 7 shipped, 7 -> 9
partial); overall 52.8% -> 53.0% shipped and 58.2% -> 58.5% weighted.
ROADMAP.md
- One progress-log entry (2026-10-13, newest first) and the banner line. It says
the catalogs are 21 with the Lithuanian additions not natively reviewed, that
the end-to-end redaction test of the Type3 layer needs the craft-fonts build
input, and that recognize_text_makes_a_scanned_page_searchable still fails where
the models are installed, as main's log already records.
docs/localization.md, docs/localization-parity.md
- The Lithuanian entry count (2,578 -> 2,668) and the counts of the other
catalogs that carry entry counts are re-measured with the 90 new entries; the
Lithuanian OCR entries are marked as not natively reviewed.
Checked: `cargo xtask parity` (numbers above, evidence tests exist) and
`cargo xtask assets` pass on this tree.
* M10.24: ocr: apply a late result only to the document it was read from
The Recognize Text dialog closes on Go, so the document can be edited, or have
text redacted, while a long run is still reading. The result was applied
without the stale check the tools and the Verify screen use, so words read
before a redaction could be written back as invisible text. The run now keeps
its guard and applies through the checked path.
Accept with the editable output in the Verify screen had the same gap (Exit
keeps the review open): it now refuses when the document changed since the
review started.
Both new tests fail with their guard switched off.
* M10.25: ocr: ocr_dictionary takes dictionary file names only
Updating sorts, lower-cases and rewrites the file it is given, so pointed at
.env or a README it would corrupt it. The tool now accepts only
ocr-dictionary-<language>.txt style names, for reading as well as writing.
The size-limit test used a file name the rule now refuses first, so it renamed
its fixture to keep testing the size limit. The new test fails with the rule
switched off.
* M10.26: pt-BR: keep (s) on the word counts and say mecanismo for engine
Two review fixes from a native speaker: the two word(s) lines had lost their
(s), so a count of 1 read as 1 palavras, and engine was translated both as
motor and mecanismo. Mecanismo is the Brazilian word for a software engine and
two lines already used it, so the other six now match.
* M10: fit the rebased OCR workflow to current main's structure
* Fix OCR workflow issues from the review
Honor the Recognize dialog's editable-output choice: its result opens in
the review screen (whose Accept writes the editable document) instead of
an invisible layer. Make page acceptance idempotent: a second Accept
entire page never appends the OCR layer twice and keeps later
corrections. Move page and region re-OCR onto a worker thread with a
status line and a cancel that discards the reading. Skip the Tesseract
probe for jobs that name their engines. Bound Tesseract's stderr while
the child runs, not only after it exits. Surface the editable output's
substitution notes in the tools' and the run's results.
Also repair the OCR batch tool against the current structure: inputs are
held to the read root again, and a batch whose inputs share an output
name is refused before the output folder is created, compared the way
the default filesystem compares names; and the editable writer test's
word stays inside the fixture's pages.
* Apply pre-review fixes to the OCR workflow
Hold the automation OCR tools to the document's copying permission, as
the other text tools are: the recognized text is left out of the
results when copying is forbidden, and the paths that carry the words
out of the document (the editable output, the review word list) are
refused. Mark the ocr_dictionary tool as overwriting its path. Close
the searchable layer's graphics state around its invisible text so the
rendering mode cannot leak into later content. Read the OCR user
dictionary folder from the portable data folder in portable mode, like
the recovery store does. Resolve the attribution manifest's leftover
conflict markers and regenerate the generated attribution. Describe the
review flow, the searchable layer's Type3 fonts and the parity evidence
references accurately, and drop an undeclared copy of the recovery
module.
* OCR: reject readings that exceed the word limit
Assisted-by: OpenAI Codex
* OCR: new documents go through the page tree builder main added
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* OCR: review notes and lints
The editable output refuses a file created during recognition. ocr_words takes
skip_text_pages and force_ocr. Automatic OCR checks the engine it will use. The
stderr test stays below the kill cap, and a failed --ocr-verify shot exits with
an error.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* OCR: restore the Verify screenshot attribution, follow the moved constants
The merge dropped the screenshot row with the translation rows. The model
filename constants live in ocrs.rs now, so the license check reads them there.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Attribution: the Verify screenshot entry goes after the header comment
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Attribution: the screenshot row in the table follows the manifest order
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: eliets2 <287273517+eliets2@users.noreply.github.com>
Co-authored-by: FredApps <FredApps@users.noreply.github.com>
Co-authored-by: FredApps <153173854+FredApps@users.noreply.github.com>
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
The transports, the message types and the origin checks come from the shared crate (storytold/craft-libs#420); PdfCraft keeps the save and dirty hooks, the open size limit and the author.
data-host="page" on the canvas opts a page that loads the module into its own document into the host bridge. The ?host=parent messages travel as non-bubbling CustomEvents on the canvas; host::Bridge holds a Transport (Parent or Page) with one send, and save, dirty, ready and failure reporting are shared. ?host=parent is checked first and unchanged. Hosting guide documents it.
* build(i18n): embed the craft-i18n catalogs from a pinned checkout
- `craft-i18n.rev` pins storytold/craft-i18n at e45ddf7 (the PdfCraft cutover sync of
pdfcraft@ecdd1e6); `.gitattributes` keeps it LF.
- The `craft-i18n` crate (craft-libs 787a7a0, PdfCraft's existing pin) is a direct dependency
of the UI crate; it was already in the tree through craft-ui.
- `crates/ui-egui/build.rs` writes `CRAFT_I18N` from `CRAFT_I18N_DIR`: one (locale, common.tsv,
pdfcraft.tsv) entry per locale with a `pdfcraft.tsv`, paths written with `{:?}` and never
canonicalized. Unset it is empty (English only); `CRAFT_I18N_REQUIRED=1` makes a missing or
invalid checkout an error.
- Both flatpak manifests name the craft-i18n commit and `CRAFT_I18N_DIR`; a test keeps both
commits equal to the trimmed pin.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* feat(i18n): look strings up through craft-i18n behind a thin Lang wrapper
`i18n.rs` keeps PdfCraft's API (tr, tr_ctx, tr_id, trn, key_name, fmt,
Lang, LANGUAGES, detection) and hands lookups to the craft-i18n crate:
`get` for key names, `trn_plain` for plurals (no isolates, no digit
grouping), PdfCraft's own `fmt` (no FSI isolates). `@id` rows and the
"Undo {action}" template are read only where PdfCraft had them, so menus
and history labels read exactly as before.
Detection is unchanged (LC_ALL/LC_MESSAGES/LANG, macOS defaults,
sys_locale); the crate's match_tag would drop nb for no/nn, so PdfCraft's
own tag mapping stays, with one parity test per path.
Completeness tests become reports; tests that need catalogs skip with a
note when the build has none. Font coverage tests read the embedded
catalogs (shared and PdfCraft rows).
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* chore(i18n): remove the in-repo catalogs; craft-i18n holds them
The 34 `crates/ui-egui/src/i18n/*.tsv` catalogs were migrated into
craft-i18n at pdfcraft@ecdd1e6 and are now embedded from the pinned
checkout. ATTRIBUTION.toml drops their 34 entries for one craft-i18n
`[[build_input]]` (craft-i18n's ATTRIBUTION.md credits the translators);
AGENTS.md and docs/localization.md describe the new system and how to
add a language.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* test(i18n): skip catalog tests without craft-i18n; drop the catalog hash exemption
Tests that switch to a non-English language skip with a note when the
build embeds no catalogs (CRAFT_I18N_DIR unset), so the English-only
build tests green. `skip_without_catalogs` moves to the integration
test support module.
With no catalogs left in the repository, `cargo xtask assets` no longer
exempts `crates/ui-egui/src/i18n/*.tsv` from hashing: every `[[asset]]`
carries a sha256 again, and a `.tsv` added back would need one.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* build(i18n): watch the locales directory before reading it
A CRAFT_I18N_DIR that doesn't exist yet now reruns the build script once it appears (review).
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* build(i18n): pin craft-i18n dfbe955, the merge of storytold/craft-i18n#129
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* fix(i18n): skip an @id row that changes the label's placeholders or ellipsis
craft-i18n checks placeholders and the trailing ellipsis on every row whose
source is English text, but not on @id rows, whose source is the command id.
The in-repo catalog test used to fail on such a row; since the cutover it only
prints it, while tr_id and menu_label still showed it. Both now use PdfCraft's
own @id row only when it keeps the label's shape (same_shape, the rule
craft-i18n applies elsewhere), and otherwise show the label's translation, as
bundled_catalogs_are_consistent says.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* fix(i18n): reject an @id row with an open brace; list unused @id rows in the gaps report
same_shape skipped a `{` with no `}`, so an @id row such as "Öffnen {name…"
for "Open…" was still shown. It now counts as a changed shape.
bundled_catalogs_are_consistent printed the @id rows PdfCraft doesn't use, but
CI captures test output, so nobody saw them. translation_gaps_report, which
`cargo xtask i18n-report` runs with --nocapture, now lists them
(unused_id_rows).
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* fix(i18n): reject an @id row with a `}` that closes no placeholder
same_shape counted only the `}` that close a `{`, so "Öffnen name}…" for
"Open…" or "{name}} öffnen" for "Open {name}" still passed. A row whose `}`
count differs from its placeholders now counts as a changed shape.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* fix(i18n): no braces in the assert messages of the brace test
assert! reads its message as a format string, so "a `}` without its `{`"
did not compile.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
Co-authored-by: FredApps <153173854+FredApps@users.noreply.github.com>
The list was fixed at 12. Preferences ▸ Documents and view now takes a
number from 0 to 50, with 12 as the default. At 0 Home has no Recent
section and File ▸ Open Recent is disabled.
The list is cut when Preferences closes, so the number can pass through
0 on its way to another. Until then Home and saved settings already
leave out what is past it. A settings file can't ask for more than 50.
The control channel and launch options take it as recent-files. The two
new strings go in every catalog as English copies.
UPDATE_APP (native builds; craft-update is a native-only dependency) carries our 128 px icon and accent (#b70228, its red, from the icon (#5245)). The updater, the self-update
helper and craft-update's startup prompt all get them through crate::UPDATE_APP; the
prompt draws the icon, the accent and "by ArtCraft" (craft-update's default developer).
craft-update is pinned to storytold/craft-libs main at 1065653e7 (#434).
Clippy fixes for Rust 1.99 in untouched code (same logic):
- crates/edit/src/images.rs
- crates/forms/src/appearance.rs
canvas.rs was split upstream; notice_bar now lives in canvas/bars.rs, so the stacked narrow layout is re-applied there.
Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>
* feat(ui): menus from craft-menu, native on macOS
One menu definition (crates/ui-egui/src/menus.rs) built from the command
registry drives the native macOS menu bar (craft-menu's muda backend) and
an in-window egui bar on Windows, Linux and the web, which takes the place
of the "Menu" button at the start of the top bar.
- File, Edit, View, Sign, Window and Help, with separators and submenus.
Edit gains Cut, Paste, Delete and Select All (they act as their keys
do) and a Pages submenu; View gains a Tools submenu built from the All
tools groups; Sign holds Fill & Sign and the certificate commands;
Window lists the open documents.
- Toggles are check items and the page layouts, side panels and themes
radio items, with their state from the app.
- File > Open Recent lists the recent files (file.open_recent with an
index).
- A menu click and its shortcut run the same dispatch, including the
form-field deferral (#166) and macOS Cmd+W closing the window (#869).
Dialogs and the palette grey the menus through craft-menu's gate.
- Quit goes through craft-quit, so the unsaved-changes prompt runs.
- craft-ui, craft-quit, craft-menu and craft-keymap pinned to
storytold/craft-libs 70ade1fb.
Menu state and dispatch follow #2610 by @hajdukste; the menu tree and the
view and panel items follow #3870 by @RivanJarjes.
* test(ui): the menu model, native dispatch and the in-window bar
- Unit tests for the menu definition: every registry menu command is
listed once with its registry shortcut; check and radio items follow
the app; a dialog greys document commands and drops their clicks; the
recent files and open documents are listed once each; a native menu
click (through a fake craft-menu backend) runs its command once.
- The kittests that opened the old "Menu" button use the menu bar, and
the ones that look up a label the bar's titles share (Edit, File,
Sign) skip the bar.
- The in-window bar takes its titles' width, so the mode tabs, search
and buttons keep their place in the top bar.
- Edit menu clicks that stand for keys (Copy, Cut, Delete, Select All)
reach this frame's input from `logic`, where test hosts see them too.
* test(ui): the language switch test opens File in the menu bar
Translated titles and rows carry their mnemonic ("ファイル(F)", "開く(O)…").
* feat(ui): the menu bars run Quit themselves, the bar shrinks to its titles, and AppKit's window list stays off
craft-libs main edc41f6 (craft-libs#354): MenuBarUi runs Quit and Minimize, shrink_to_fit sizes the in-window bar, Key::parse reads the registry's arrow and minus glyphs, and mac::install_with(.., window_list(false)) keeps the Window menu to PdfCraft's own document list.
* fix(ui): the menu command filter is an if, for clippy
* test(ui): drop a needless borrow in the edit-tab helper
* test(ui): two tests follow the menu bar
The tests were wrong, not the app. The Preferences language test clicked the old Menu button; it opens Edit in the menu bar and its Preferences row. The prepare Actions test counted the Edit labels: the narrower menu bar leaves room for the Edit tab, so the rows' Edit buttons come third and fourth.
* feat: startup update prompt modal and direct self-updating
Help ▸ Check for updates and the check at start run through craft-update's Updater, which replaces the old GitHub fetcher and update source. The check at start is opt-in for the desktop app (test harnesses never reach the network), an install holds back while documents are unsaved, and a finished update closes through the app's quit path. craft-update stays out of the wasm build.
Ref: storytold/craft-libs#319
* test(updates): the prompt's buttons are DOWNLOAD and LATER
* build: pin craft-update to craft-libs main (db19c37)
* fix(updates): run the Windows update helper before argument parsing
* fix(updates): point the parity evidence at the current update tests
* Record successful PdfCraft web application check
* E21: bound startup requests and validate font and license inputs
* E21: separate pending control completion and gesture regression phases
* M-egui037: enforce control admission and per-family font notices
* M-egui037: qualify capture fixes and document migration behavior
* egui-037: identify current and historical qualification results
Upstream dropped the Read mode tab and added its own scrolling rail (#3282);
keep upstream's rail, keep the PR's narrow-window mode menu, and move the
min-window tests into the tests/it binary (rail test dropped, covered upstream).
Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>
ISO 32000-2 §8.6.6.5: "DeviceN colour spaces (PDF 1.3) may contain an
arbitrary number of colour components", and scn takes one operand per
component. The content parser (vendored hayro-syntax) held ten operands
per instruction; pushing the eleventh failed, and the failure ended the
whole content stream. A twelve-ink background fill therefore drew
nothing, and nothing after it was drawn either: a blank page, no error.
hayro-syntax patch (26): an instruction keeps up to 256 operands (enough
for the largest DeviceN space the interpreter reads, 255 inks, plus a
pattern name). Past that the oldest are dropped, in order, rather than
the stream ending: operators already read the operands nearest to them,
so this is how stray operands are treated below the cap too.
hayro-interpret patch (55): a Separation or DeviceN tint transform that
can't be read no longer makes the colour space unreadable (its paints
were drawn in DeviceGray from the first tint, white for a full tint);
it keeps the space, and like a transform that fails when evaluated it
paints that colour in the alternate space's initial colour. Those
fallbacks, and a cs/CS colour space that can't be read, were silent:
they are reported once per content stream as
InterpreterWarning::ColorFallback, which pdfcraft-render records as
RenderWarning::ColourFallback and pdfcraft-cli render prints.
Tests, each seen failing with its fix reverted: the report's twelve-ink
page paints black and draws what follows; a four-ink control; 300 stray
operands before rg still draw; a calculator tint transform that pops
too much, and an unknown function type, fall back with one warning and
the rest of the page drawn; hayro-syntax keeps all twelve scn operands
and, past the cap, the latest 256 in order (fails without the reorder).
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_0175FWj4xFhMhSH3UpMU8DSC
* chore: resolve SonarCloud maintainability issues
* fix(packaging): use verify_sha256 helper function
* style: cargo fmt
* fix: restore wildcard imports and fix method-reference type errors
Revert the glob-import expansions (they missed SomIndices and left unused
imports), revert char::is_ascii_digit where the iterator yields char by
value, and pass the content slice to prune_doomed_xobjects as &[Vec<u8>].
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Keep XObject decodability check without binding content in interp
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
Co-authored-by: Dylan Taylor <dylan@craftmaker.dev>
The desktop app's argument loop took `--help` as a view setting named
`help` (consuming the next argument as its value) and `-h` as a file to
open, so both started the window and a scripted call never returned.
`-h` and `--help` now print a short usage, which points scripts to
pdfcraft-cli, and exit 0 before any window or log file is created.
`--version` and `--help` write through a plain `writeln!` instead of
`println!`, which panicked (exit 101) when standard output was full or
closed, e.g. `pdfcraft --version > /dev/full`.
Release builds on Windows are GUI-subsystem programs, so, as with
`--version` already, the text shows when the output is redirected or
piped but not in a plain console window.
Fixes#4076
* #2028: test that Edit text & images is the first Modify page item
Edit text & images was listed under Add content, though it changes what is already on the page. The test checks that the Edit a PDF catalogue lists it first under Modify page and not under Add content. With the item back under Add content it fails on the section assertion (left: Add content, right: Modify page).
* #246: test that start-up and the panic hook never use eprintln
eprintln! panics when standard error is a broken pipe, and a panic inside the panic hook aborts the process. The test scans the product code of the desktop main.rs (everything before the test module) and fails on any eprintln! outside a comment. With the old eprintln! calls restored in the panic hook and the log-file warning, it fails listing main.rs:188 and main.rs:227.
* #843: test that text typed into an open paragraph counts as unsaved work
An open paragraph with a draft that was not applied yet was not counted as unsaved work, so closing the tab or quitting skipped the save prompt. The test opens a paragraph, types into it, and checks that first_dirty() reports the tab (and not before typing, nor after the original text is typed back). Without the line_editor check in has_unsaved_work, first_dirty() stays None and the assertion fails (left: None, right: Some(0)).
Review of #3849: both tests asserted `stderr.contains("No such file")`, which
is the Unix wording. On Windows the same error reads "The system cannot find
the file specified. (os error 2)", so `test (windows-latest)` failed on them.
Neither test is about the wording. What they are about:
- `a_flag_that_takes_no_value_does_not_swallow_the_file`: the error is about
`missing.pdf`, and is not "check-one: missing file" -- the file reached the
command instead of being eaten as `--edit`'s operand.
- `a_file_whose_name_starts_with_dashes_is_still_reachable`: the error names the
file the command could not open (`missing.pdf`, or `./--dash.pdf` for the
`info` case), and is not a usage error about a value or an unknown option.
Both now assert exactly that, plus the absence of our own usage phrases. Every
string they match is one this CLI prints, so the OS has no say in it.
* Build each crate's integration tests as one binary
Every tests/*.rs file is its own executable that links the whole crate
graph. Move each crate's test files into tests/it/ as modules of one
tests/it/main.rs, for apps/pdfcraft, apps/pdfcraft-cli, automation, cos,
crypt, engine, render, sign and ui-egui. ui-egui's ui_group binary and
the support modules move into tests/it/ too. Crates with a single test
file keep it. The test executables go from 150 to 52, and every crate
runs the same number of tests as before.
ui-egui perf keeps its own binary (own process): its frame-time budgets
would charge each measurement for the other tests running beside it.
What the move needs:
- include_str!/include_bytes! and #[path] paths gain one "../".
- ui-egui: one GPU lock in tests/it/main.rs replaces the five per-file
ones (content, document_links, editing, fill_sign, view), so one
process creates one wgpu device at a time. The drop-line test in ui.rs
and the screenshot blocks behind PDFCRAFT_*_SHOT(S) and
CRAFT_UI_DOCKING_DIR, which render without holding it, take it too.
- pdfcraft winit_wayland_scroll: the vendored winit source it compiles
names crate::event, so that shim lives in main.rs.
- parity evidence names the new paths.
* Name the one-binary test paths in docs and comments
- READMEs, docs, ATTRIBUTION and source comments name tests/it/<file>.rs.
- The oracle README's example filters with --test it encryption::qpdf_agrees.
- pdfcraft's GPU lock comment points at the UI tests' shared lock in
crates/ui-egui/tests/it/main.rs.
#2425 writes opaque rasters as 8-bit RGB; the owner-password render test
was written against the RGBA encoder. A rendered page is always opaque,
so the test asserts RGB and still counts inked pixels.
BFlat
austin62jake
jonathanwxh-cell
FredApps
bmh129
Chiranjeevi U
vangel76andClaude Sonnet 5.5
Helen Kwok
VoiceLessQ
Dylan M. Taylor
aiongg
aiongg
skylar
Ridwan
Hamza