Conflict: layout/flow.rs imports take both MAX_INSTANCES (this PR) and
MAX_MEASURES (main). Main's new check-box width arm in measure() now
passes the &Ctx this PR's per-instance measure takes.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01Pq7HyCHD1R3rywQBPCHXZA
A rewrite also takes away copies of its words. With a copy earlier on the
page, the words after it moved up the list, so the next change rewrote the
word after the one it meant: deleting John removed Smith and left John.
Before each change, the words up to the next one that stays must still be
where they were. If they aren't, the edit falls back to the whole-phrase
rewrite.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Backspacing over a word leaves the spaces either side of it, and the rule
that sent spacing to the whole-phrase rewrite took that for spacing someone
asked for, so the most ordinary deletion redrew the whole line again.
Spaces beside a change are nothing to draw: the words around it stay where
the scan has them, with the gap already between them. Only what has to be
drawn goes to the whole rewrite: spacing inside the new words, between two
words nothing else changed, or any whitespace other than spaces.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
- A draft with the same words (a space typed after the last) changes
nothing and is no undo step. It used to redraw the whole phrase.
- Rewriting words alone is refused when it would move any other text on
the page, visible text too, not only other OCR words.
- A cover stops at the words either side that stay: the padding of a
large word could reach over the ink of a small one beside it.
- Spacing other than one space between words goes to the whole-phrase
rewrite, which keeps it, instead of being dropped.
- A squeeze is relative to the scale the words already have.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Deleting one word from a recognised line covered the whole line and
redrew it in Helvetica, though nothing but that word had changed.
A text edit of an OCR phrase now covers and redraws only the words it
changes; the rest stay as the scan shows them, still invisible text. Each
changed stretch is rewritten as a phrase of its own, on a copy of the
document, and the edit falls back to the whole-phrase rewrite when words
can't be told apart or a kept word would move. A deleted word leaves its
gap. A replacement a little too wide is squeezed across to fit, by up to
a quarter; wider than that it takes over the next word. A change of
formatting, or a typed line break, still redraws the whole phrase.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Review follow-ups:
- The phrase's median counts each word once: neighbouring words OCR
sized alike share a run, so 15, 9 and 9 pt gave 12 pt, not 9.
- The styled rewrite's width calibration is not clamped again after the
phrase ratio, so a word sized at more than twice the phrase keeps the
width the scan shows it at.
- The single-style rewrite (a new family or bold) scales the first
word's Tz by its own size over the phrase's, so the line is as wide
whatever size OCR guessed for that word.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Recognize text sizes each word from its own box and a guess at how much
of the em its letters fill, so one phrase's words come out several
points apart (9 to 15.6 pt on a LaTeX scan). Editing a phrase drew and
saved every word at its own size.
An invisible block's size is now the median of its words' sizes
(TextBlock::phrase_size). The styled rewrite draws every run at it and
scales each word's width calibration by its own size over the phrase's,
so words keep the width the scan shows them at; the single-style
rewrite (a new family or bold) uses it in place of the first word's
size; and the inline editor lays each word out at it while typing.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* M10.20: plan Unicode text for OCR output in Type3 faces (fonts, edit)
OCR output used to flatten every character beyond WinAnsi to a silent `?`. This
adds the two pieces that let the OCR layers write the recognized words as they
are; the OCR code that uses them follows in M10.21.
pdfcraft-fonts
- `TextPlan::for_words` maps each word to the standard Helvetica when WinAnsi
covers it, else to Type3 fonts drawn from the craft-fonts faces (the Japanese
document face first, then the rest of the build input). Characters no face
has a glyph for are counted (`missing`), never dropped silently. At most 240
characters per font and 2400 per plan, so one hostile word cannot balloon.
- Which face has which character is asked once per (face, character) for a plan,
not once per word.
- `face_has`, `craft_glyph`, `win_ansi_char`, `fits_win_ansi` are public for it.
pdfcraft-edit
- `add_type3_fonts` / `stamp_with_fonts` register a plan's fonts on a page under
a free `PCOcr`, `PCOcr1`, ... name, build each font once and share the object
with later pages. A shared face is registered under a free name on a later
page that already has a font of the name it was given first, instead of
replacing that page's own font.
- The fonts carry real advances and a ToUnicode CMap, so extraction reads the
text back.
pdfcraft-redact
- A test shows a hand-built Type3 text layer (the shape the OCR output writes) is
redacted like any other text and the verifier passes.
Tests: pdfcraft-fonts 62 passed, pdfcraft-edit 129 passed, pdfcraft-redact 33
passed; clippy -D warnings clean on the three crates. The name-reuse and the
redaction tests build their fonts by hand, so they run without the craft-fonts
build input; the tests that plan real faces skip without it and were not run in
this commit's own check.
* M12: give the hostile-XFA open test more room on a loaded machine
The test opens a form whose calculate script sets a value 50 000 times, against
the one-second budget of an unasked script and a five-second wall-clock bound
on the open. Both sit close to what a machine running several suites at once
can take, so the test can fail without anything being wrong.
It now runs 20 000 iterations (the total is 19999) and allows 30 seconds, which
still fails for a script that hangs or is not capped. Test-only; unrelated to
the OCR work in this series, so it is a commit of its own.
Tests: both hostile_xfa tests in pdfcraft-engine pass.
* M10.21: pluggable OCR engines, preprocessing, review sessions and the OCR tools (ocr, engine, create, automation)
Scan & OCR gets a second engine, optional raster clean-up, a review step before
anything is applied, editable output and a batch mode, headlessly first: the
interface for them follows in M10.22.
pdfcraft-ocr
- A `Recognizer` trait with two engines: the built-in ocrs (moved out of lib.rs)
and the installed tesseract program, run as a fenced external process: fixed
argv, allow-listed language codes, a private temp directory (mode 0700 on
Unix), 120 s timeout, 64 MiB output cap, 50 000-word reading cap. A location
from PDFCRAFT_TESSERACT is validated (absolute, existing, executable) and an
invalid one fails closed instead of falling back to the PATH. `--list-langs`
and `--version` are read from stdout or, for older versions, stderr.
- Strategies: PrimaryOnly, ConfidenceWeighted (the second engine joins when the
first reading's mean is under 70 or unknown) and a ROVER merge (higher
confidence wins per word; against an ocrs word of unknown confidence a
tesseract word wins only at 70 or more; capped at 100 M comparisons; a failing
partner degrades to the primary with a note).
- Preprocessing: opt-in auto-rotate, deskew, denoise and binarize on the RGBA
raster, each with an exact inverse so word boxes map back to the scan. The
300 dpi normalization the steps are calibrated for runs only when a step is
on: with every step off the render is read as rendered, as before. (Enlarging
a 72 dpi render 4x on its own made the models read "due: €250" as "ue: ?250".)
`OcrImage` is validated by construction (side and 64 MP area caps, checked
before any buffer is allocated, including by the resize).
- Confidence bands (High >= 90, Medium 70-89, Low < 70) drive review.
pdfcraft-engine, pdfcraft-create
- `OcrSettings` gains engine, strategy, the four steps, output mode, region, the
skip flags and the low-confidence threshold; Automatic reads confidence
weighted unless a strategy is chosen.
- A recognition is a session: the document guard refuses a stale result with its
reason, pages can be applied one at a time (the guard is taken again after each
applied page), and applying is one undoable step. A per-language dictionary
(a plain-text file: words added from any document stay on disk after it closes).
- Output is searchable (an invisible layer) or a NEW editable document of visible
text at the recognized boxes (`create::from_contents`); words beyond WinAnsi use
the Type3 faces of M10.20 in both, with the shared plan across pages.
- Engine discovery never blocks the interface: results are cached, a stale
answer is shown while a background probe retries, and the models search and
`--version` are cached. Batch: pages or files that already have text are
skipped unless forced, and inputs sharing a file name are found up front.
pdfcraft-automation
- ocr_recognize (engine, strategy, steps, region, output mode), ocr_words (with a
retained review handle), ocr_review_apply, ocr_dictionary, ocr_status and
ocr_recognize_files. The editable `out` must be a new file inside --root and is
refused for a searchable run (it used to be ignored), two batch inputs of one
file name are refused before anything is read, and the batch folder is checked
for existing outputs.
pdfcraft-ui-egui
- Only what the new API needs: the Recognize Text dialog reads with
`recognizers(&settings)`. `ocr.correct` is registered with its label in every
catalog; the screen itself is M10.22.
Tests: pdfcraft-ocr 78 passed; pdfcraft-create passed; pdfcraft-engine and
pdfcraft-automation 450 passed and 1 failed (the automation lib 17, automation.rs
157, hostile_args 2 among them); pdfcraft-ui-egui lib + ocr + control tests 391
passed; clippy -D warnings clean on the five crates. The one failure is in a
test this commit does not change:
recognize_text_makes_a_scanned_page_searchable fails where the models are
installed (they read "quick" as "auick" at that render size); the roadmap on main
already records it. The real tesseract binary ran in
tesseract::tests::recognize_runs_the_installed_binary (tesseract 5.4.0, PATH).
* M10.22: OCR Verify screen, the Recognize Text options and the interface catalogs (ui-egui)
Scan & OCR ▸ Correct recognized text: a full-window screen where a recognition
is reviewed before anything is applied, plus the dialog and batch options for
the engines of M10.21.
OCR Verify screen
- Four panes: the page list, the source page with confidence-coloured word boxes
(click to select, drag to draw a region), the recognized text, and a zoom plus
word inspector. Corrections commit on Enter (an empty commit removes the word),
Remove/Restore, "+ Dictionary" (a per-language file in the preferences folder,
so a word added from a document stays on disk after it closes), per-word and
per-page Verified, F8 / Shift+F8 walk the low-confidence words, Ctrl+T marks the
page reviewed, Ctrl+Tab moves the pane focus, and review edits undo within the
panel.
- Re-OCR of the whole page or a drawn region. A region re-read moves the review
marks of the words it keeps to their new positions and selects the first new
word; a whole-page re-read clears that page's marks (and the undo brings them
back). The region outline is scaled onto the pane, not mapped through user
space again, so it is right on rotated and cropped pages.
- Accept / Reject per page or whole. Pages accepted one at a time each apply once
(the document guard is taken again after each applied page; an edit made
elsewhere in between is still refused with its reason), and Accept in
searchable mode is one undoable step. Editable mode writes a NEW
`<name>_ocr.pdf` through a save dialog and never the source. A real Cancel
keeps the pages already read.
- The engine and strategy menus disable a choice that cannot run and say why;
the check never waits on a process (a background probe fills a cache), and
choosing Automatic moves "Primary only" to Confidence weighted.
Recognize Text dialog and batch
- Engine, strategy, the four clean-up steps and the skip flags are remembered with
the other choices (a saved Automatic without a strategy reads confidence
weighted). The batch refuses two inputs of one file name and existing outputs
before reading anything, notes low-confidence pages at the settings' threshold,
and its toast has a Cancel (the file in flight finishes).
Catalogs and attribution
- The 90 new interface strings are in all 21 catalogs (the Lithuanian ones were
written without native review, and the Bulgarian ones avoid U+045D, which the
bundled monospace face lacks). ATTRIBUTION.toml carries the new hashes, a
note on the Lithuanian entries and the README screenshot; ATTRIBUTION.md is
regenerated.
- README: a screenshot of the Verify screen, taken with
`cargo xtask screenshots` from a synthetic scan (`shot --ocr-verify on`) built
from allowed assets; the page reads it with the real engines.
Tests: pdfcraft-ui-egui lib 373 passed (1 ignored: the Windows hinting
measurement probe), tests ocr 6, control 46, fonts 9; clippy -D warnings clean on
the engine, ui-egui, pdfcraft and xtask packages; `cargo xtask assets` ok. The
review state machine has unit tests for every fix above; each was seen failing
with its fix reverted.
* M10.23: parity entries, roadmap and localization notes for the OCR workflow
Records what M10.20-M10.22 ship, and what they do not.
parity/acrobat-features.toml
- Status changes against main: ocr.rotation-detection and ocr.deskew planned ->
shipped (the opt-in steps of M10.21, with their tests); ocr.correct-recognized-
text and ocr.ocr-engines planned -> partial. Other Area I entries get their
evidence and notes brought up to date.
- ocr.correct-recognized-text: the evidence includes the one-page-at-a-time accept
and the region re-read tests; the notes say what the headless tools cover
(ocr_words with a retained review, ocr_review_apply through the same stale-
document guard, ocr_dictionary) and what is still UI-only (suggestions,
per-word Verified marks, region re-reads).
- ocr.ocr-engines stays partial rather than shipped: part of its evidence is
conditional (the real-binary test runs only where tesseract is installed and
skips elsewhere, and the process-level tests are Unix-only). It cites the tests
that always run (location validation and the fail-closed rule, --list-langs
parsing from stdout or stderr, the merge rules, the default strategy) and says
which part is not proven everywhere.
- `cargo xtask parity`: area I 32.7% -> 44.2% weighted (5 -> 7 shipped, 7 -> 9
partial); overall 52.8% -> 53.0% shipped and 58.2% -> 58.5% weighted.
ROADMAP.md
- One progress-log entry (2026-10-13, newest first) and the banner line. It says
the catalogs are 21 with the Lithuanian additions not natively reviewed, that
the end-to-end redaction test of the Type3 layer needs the craft-fonts build
input, and that recognize_text_makes_a_scanned_page_searchable still fails where
the models are installed, as main's log already records.
docs/localization.md, docs/localization-parity.md
- The Lithuanian entry count (2,578 -> 2,668) and the counts of the other
catalogs that carry entry counts are re-measured with the 90 new entries; the
Lithuanian OCR entries are marked as not natively reviewed.
Checked: `cargo xtask parity` (numbers above, evidence tests exist) and
`cargo xtask assets` pass on this tree.
* M10.24: ocr: apply a late result only to the document it was read from
The Recognize Text dialog closes on Go, so the document can be edited, or have
text redacted, while a long run is still reading. The result was applied
without the stale check the tools and the Verify screen use, so words read
before a redaction could be written back as invisible text. The run now keeps
its guard and applies through the checked path.
Accept with the editable output in the Verify screen had the same gap (Exit
keeps the review open): it now refuses when the document changed since the
review started.
Both new tests fail with their guard switched off.
* M10.25: ocr: ocr_dictionary takes dictionary file names only
Updating sorts, lower-cases and rewrites the file it is given, so pointed at
.env or a README it would corrupt it. The tool now accepts only
ocr-dictionary-<language>.txt style names, for reading as well as writing.
The size-limit test used a file name the rule now refuses first, so it renamed
its fixture to keep testing the size limit. The new test fails with the rule
switched off.
* M10.26: pt-BR: keep (s) on the word counts and say mecanismo for engine
Two review fixes from a native speaker: the two word(s) lines had lost their
(s), so a count of 1 read as 1 palavras, and engine was translated both as
motor and mecanismo. Mecanismo is the Brazilian word for a software engine and
two lines already used it, so the other six now match.
* M10: fit the rebased OCR workflow to current main's structure
* Fix OCR workflow issues from the review
Honor the Recognize dialog's editable-output choice: its result opens in
the review screen (whose Accept writes the editable document) instead of
an invisible layer. Make page acceptance idempotent: a second Accept
entire page never appends the OCR layer twice and keeps later
corrections. Move page and region re-OCR onto a worker thread with a
status line and a cancel that discards the reading. Skip the Tesseract
probe for jobs that name their engines. Bound Tesseract's stderr while
the child runs, not only after it exits. Surface the editable output's
substitution notes in the tools' and the run's results.
Also repair the OCR batch tool against the current structure: inputs are
held to the read root again, and a batch whose inputs share an output
name is refused before the output folder is created, compared the way
the default filesystem compares names; and the editable writer test's
word stays inside the fixture's pages.
* Apply pre-review fixes to the OCR workflow
Hold the automation OCR tools to the document's copying permission, as
the other text tools are: the recognized text is left out of the
results when copying is forbidden, and the paths that carry the words
out of the document (the editable output, the review word list) are
refused. Mark the ocr_dictionary tool as overwriting its path. Close
the searchable layer's graphics state around its invisible text so the
rendering mode cannot leak into later content. Read the OCR user
dictionary folder from the portable data folder in portable mode, like
the recovery store does. Resolve the attribution manifest's leftover
conflict markers and regenerate the generated attribution. Describe the
review flow, the searchable layer's Type3 fonts and the parity evidence
references accurately, and drop an undeclared copy of the recovery
module.
* OCR: reject readings that exceed the word limit
Assisted-by: OpenAI Codex
* OCR: new documents go through the page tree builder main added
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* OCR: review notes and lints
The editable output refuses a file created during recognition. ocr_words takes
skip_text_pages and force_ocr. Automatic OCR checks the engine it will use. The
stderr test stays below the kill cap, and a failed --ocr-verify shot exits with
an error.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* OCR: restore the Verify screenshot attribution, follow the moved constants
The merge dropped the screenshot row with the translation rows. The model
filename constants live in ocrs.rs now, so the license check reads them there.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Attribution: the Verify screenshot entry goes after the header comment
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Attribution: the screenshot row in the table follows the manifest order
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: eliets2 <287273517+eliets2@users.noreply.github.com>
Co-authored-by: FredApps <FredApps@users.noreply.github.com>
Co-authored-by: FredApps <153173854+FredApps@users.noreply.github.com>
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
A soft mask is placed by the CTM in force when its `gs` runs (ISO 32000-2
11.6.5.2). The paragraph lifted over the scan re-selects the graphics state
after its own `cm`, so a mask selected before a translation landed
translated with it and could hide the new text. A re-emitted state that
carries a dictionary /SMask now records its anchor CTM and is selected
there: `cm` to the anchor, `gs`, `cm` back.
The test edits the same paragraph with and without a mask and requires the
same ink; it fails with the re-anchoring disabled (the mask lands 100 pt
right and the text vanishes). Both rewrite paths.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01SqmHYx8FiWM5PcsoiErgp9
Setting a field's rotation (Properties > Position, form_set_props) swapped
the widget's width and height around its center, so a tall field placed
along a page edge jumped into a short, wide one, and typing in it showed
the text upright.
ISO 32000-2 Table 192 /MK /R turns the widget annotation relative to the
page; its /Rect stays the area it occupies in default user space. So a
rotation now changes only /MK /R: the rectangle stays, and the regenerated
appearance lays the text out along the turned direction (the box /BBox is
as wide as the field is tall, and /Matrix turns it onto /Rect).
On screen, the in-place editor and the just-committed preview paint the
text turned by /MK /R less the page's /Rotate and the view's rotation, as
the page will show it. The editor still takes the keys and pointer over
the field, and a press or drag places the caret in the turned text.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_0175FWj4xFhMhSH3UpMU8DSC
The stand-in fitting of hayro-interpret patch (67) also applies to Symbol
and ZapfDingbats (ISO 32000-2 9.6.2.2, Annex D.5 and D.6). Tests show
that their glyphs, and the check mark a check box draws for its /MK /CA
caption 4, keep the standard advance:
- symbol_dingbats_width (pdfcraft-render tests/it): Symbol alpha, beta,
pi, Sigma, Omega, Delta, infinity, bullet and plus, and ZapfDingbats
a20, a19, a23, a24, a71, a73, a77 and a28, drawn with no /Encoding:
each glyph's ink lies within its standard advance and fills most of
it, and the next glyph starts one standard advance on.
- dingbat_check_box (pdfcraft-engine tests/it): a check box with no /AP,
/DA (/ZaDb 60 Tf 0 g) and /MK /CA (4) draws its check centred in the
box, within its 846-unit advance and not squeezed.
The patch is renumbered (67), next after main's highest (66), and the
Tests column lists the new tests.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_0175FWj4xFhMhSH3UpMU8DSC
An OCR paragraph that may go on top of the page is checked (`check_on_top`)
before either rewrite path changes the document, so a page whose marked
content nests too deep is refused with nothing changed. `lift_on_top` no
longer checks.
Tests: undo restores the hidden layer and the scan, redo, save and reopen,
and a second edit of the moved text all show the edit; a phrase split from
visible text in the same text object shows its edit; a refused rewrite on a
too-deep page leaves the saved bytes unchanged. Each new test was seen to
fail with its part of the fix reverted.
Parity: the note says when the edit is drawn on top and lists what is
still missing.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01SqmHYx8FiWM5PcsoiErgp9
Some OCR tools write the invisible text layer first and the opaque page
image after it. Edit text rewrote such a phrase in the text's place, so
the cover and the new visible text were painted under the scan: the edit
was saved (text extraction finds it) but nothing showed.
When the rewritten paragraph was invisible and an XObject, inline image
or shading is painted after its place, the cover and the new text now go
on top of the page in their own q/Q (place_tagged, tagged Edited), drawn
from the initial graphics state with the paragraph's CTM. Only the state
the following text expects stays in place. Both rewrite paths (single
style and styled rows) do this. An OCR layer drawn over its scan, the
common case, is rewritten in place as before, so reading order is kept.
The test builds a scan whose OCR word comes before the image and checks
the cover and new text show, for one line and for a typed line break.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01SqmHYx8FiWM5PcsoiErgp9
A table subform (layout="table") placed in positioned content was drawn
through draw_node, which drew each row subform once: the rows the data
holds past the first, and an occur initial count, were dropped with no
warning, while the same table in flowed content repeated them (XFA 3.3,
"Tables", p. 327; "Repeating Elements using Occurrence Limits", p. 263;
Chapter 9, p. 336).
The positioned table now draws each row once per instance, one under
another with its own SOM index, and is measured with them, so what
follows it in a top-to-bottom container moves down. The count and the
warning for the rows cut come from one helper, laid_out_instances, now
used by every layout that repeats a subform (flowed subforms, flowed
tables, positioned top-to-bottom, wrapped and table layouts).
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_0175FWj4xFhMhSH3UpMU8DSC
A repeating subform laid out at most 50 instances, so rows 51 and on of a
long list or table (from the data, or added by a button's addInstance)
were left out. XFA 3.3, "The occur element" (p. 786): max -1 sets no
upper boundary.
The per-subform bound is now 1,000: the largest occur count the parser
reads and the most rows one script run may add (MAX_ADDED). The layout
budgets still bound the whole form. Opening a form with 1,000 one-field
rows takes about 3 s in a debug build and 2,000 rows about 13 s, so a
much larger bound would let one list stall the app. Rows past the occur
max or the bound are still reported, and the warning now names the
layout's bound when that is what cut them.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_0175FWj4xFhMhSH3UpMU8DSC
Office export encoded and kept a separate copy of an image for every place
a page drew it, so a short content stream repeating Do on one large image
multiplied it into gigabytes before the writers' limits applied. Each image
object is now encoded once and its bytes shared (pdfcraft_export::Image
holds an Arc<[u8]>), distinct pictures share a 512 MiB budget whose
overflow lists the page as truncated, and RTF, which leaves pictures out,
prepares none.
* Build each crate's integration tests as one binary
Every tests/*.rs file is its own executable that links the whole crate
graph. Move each crate's test files into tests/it/ as modules of one
tests/it/main.rs, for apps/pdfcraft, apps/pdfcraft-cli, automation, cos,
crypt, engine, render, sign and ui-egui. ui-egui's ui_group binary and
the support modules move into tests/it/ too. Crates with a single test
file keep it. The test executables go from 150 to 52, and every crate
runs the same number of tests as before.
ui-egui perf keeps its own binary (own process): its frame-time budgets
would charge each measurement for the other tests running beside it.
What the move needs:
- include_str!/include_bytes! and #[path] paths gain one "../".
- ui-egui: one GPU lock in tests/it/main.rs replaces the five per-file
ones (content, document_links, editing, fill_sign, view), so one
process creates one wgpu device at a time. The drop-line test in ui.rs
and the screenshot blocks behind PDFCRAFT_*_SHOT(S) and
CRAFT_UI_DOCKING_DIR, which render without holding it, take it too.
- pdfcraft winit_wayland_scroll: the vendored winit source it compiles
names crate::event, so that shim lives in main.rs.
- parity evidence names the new paths.
* Name the one-binary test paths in docs and comments
- READMEs, docs, ATTRIBUTION and source comments name tests/it/<file>.rs.
- The oracle README's example filters with --test it encryption::qpdf_agrees.
- pdfcraft's GPU lock comment points at the UI tests' shared lock in
crates/ui-egui/tests/it/main.rs.
bflatastic
mtlcl410
Tiago KielandClaude Opus 5.5
KenM76andClaude Opus 5.5
mtlcl410andClaude Opus 5.5
aiongg
aiongg