decoded_image paired the fax filter with the last /DecodeParms entry,
but Stream::filters leaves /Crypt out wherever it stands, so with
[/CCITTFaxDecode /Crypt] the fax filter got the Crypt entry and lost
its /K, /Columns and /BlackIs1. Its entry is now that of the last
filter but a /Crypt. /Crypt belongs first (ISO 32000-2 §7.4.10), so
only a malformed file had it (from CodeRabbit's review).
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
A 2 × 2 tie always gave sample 0, black in grey and the painted part of
an image mask with the default decode array. With an inverting one,
[1 0], 0 is white or unpainted, and in a separation 0 is no ink, so a
line half a new pixel wide could vanish. dark_is_one says which sample
is dark from the colour space and decode array: 0 in grey and of a
mask, 1 in a separation or a DeviceN of one colourant, each the other
way round when the decode array inverts; an indexed image keeps entry
0, as its palette, not the decode array, says which is darker.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01BfMGHQNgdq5yf5tKZHGR3z
The PDF Optimizer and Reduce File Size downsampled colour and grey images
but not black-and-white ones. Settings::mono is now MonoSettings {
downsample, target_ppi, above_ppi, compression }, 300 ppi above 450 ppi
and CCITT Group 4 by default (Monochrome Images ▸ Downsample to;
doc_optimize mono: { downsample, ppi, above_ppi, compression }).
A 1-bit image or image mask (no filter, general-purpose filters, or CCITT
fax after any of them) and eight-bit grey of only black and white are averaged by
area: each new pixel takes the sample covering more of it, a tie 0, so a
dark line half a new pixel wide stays. They are stored as Group 4, or as
1-bit Flate when that is smaller; with Retain a resampled image keeps its
kind of compression. Images with a soft mask keep their size.
CCITT decoding moves from Export ▸ Images into pdfcraft-filters
(decode_ccitt, CcittParams, through hayro-ccitt), and
pdfcraft_cos::Document::decoded_image reads a fax image's /DecodeParms
for it (undoing filters before CCITT, such as ASCII85Decode, with any
/DecodeParms given by reference made direct first), so export
and the optimizer share one reader, and Group 4 scans can be
downsampled. A 600 ppi text page went from 79 KB to 40 KB.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01BfMGHQNgdq5yf5tKZHGR3z
"Export ▸ Images reads byte-aligned Group 3 whichever way its fill
falls" read byte-aligned rows unaligned whenever /EndOfLine was set.
That broke byte-aligned Group 4 with /EndOfLine (refused); read Group 3
that says /EndOfLine but has no codes unaligned, and wrongly; and read
codes with the fill before them, but no /EndOfLine, on bytes: every row,
the wrong picture, nothing said. Now:
- Group 4, and rows not on bytes, read as the parameters say;
- Group 3 rows on bytes are read by the data: T.4 sends an end-of-line
code before the first row when it sends them at all, and no other code
starts with more than eight zeros. Data that starts with 11 zeros or
more (fill included) and a 1 has codes, and is read unaligned, where
the codes mark the rows whether the fill starts each code on a byte or
ends it on one; other data is read on bytes, whatever /EndOfLine says.
A reading that comes up short is reported rather than tried the other
way, where data cut short would read as other rows.
The Group 3 test exports nine pictures, stripes and eight of random
text-like runs (how a misreading comes out depends on the picture),
coded with T.4's terminating codes at /K 0 and 1: no codes, with
/EndOfLine and without; codes each starting on a byte or ending on one,
with /EndOfLine and without. Each exports as its picture, and each a
byte short is reported; at /K 1, codes with none before the first row
(not as T.4 sends them) export as their picture or are reported.
Byte-aligned Group 4 still reads with and without /EndOfLine. The
create.export-all-images parity note says what is still limited: such
codes may export wrong at /K 0, as the create README says. A rule tried
first, reading both ways and refusing an image that gave every row both
ways differently, failed on the stripes without codes (TIFF's Modified
Huffman layout): its unaligned reading gives every row too, wrongly. So
did one that read the other way when the first reading came up short: it
drew data cut short as other rows. cargo-mutants leaves no mutant of the
new lines alive.
From reviews with the pdfcraft-review skill.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01P6yUtvWGPsJpMLyh6pxSXG
- A noisy 640 × 800 soft mask under 1200 × 1500 text: resampled to the
image's new size it shrinks only a little, by less than the grey
settings' JPEG adds over the packed image, so packing wins; not
counting the new mask passed every test before.
- The hex-text half of the bomb test also stores eight-bit
black-and-white, which must pack, as its comment says.
- The optimize README, the mono-compression parity note and both
progress logs say the soft mask counts.
- The Copy Image parity note no longer lists CCITT as missing: it
copies through Export's decoder, which reads CCITT now.
From reviews with the pdfcraft-review skill.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01P6yUtvWGPsJpMLyh6pxSXG
With /EncodedByteAlign and end-of-line codes, the fill may start each
code on a byte or end it on one (T.4's fill, as TIFF writes it); the
second was misread, and the image refused as short. With end-of-line
codes the decoder now reads unaligned, as the codes mark the rows either
way (probed black-box for /K 0, 1 and 2); codes laid out so under
/EndOfLine false are still misread. The Group 3 test covers both
layouts, /EncodedByteAlign given by reference, and a /BlackIs1 that
inverts the picture given by reference (with_direct_parms resolves both
before the decoder reads them).
From reviews with the pdfcraft-review skill.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01P6yUtvWGPsJpMLyh6pxSXG
- Eight-bit black-and-white text under a noisy soft mask: the grey
settings win, as they shrink the mask far more than packing saves.
Counting the packed image without its mask passed every test before.
- The packing test checks the report's byte totals exactly.
- Export reads Group 3 with end-of-line codes, with rows on a byte
(EncodedByteAlign), with both, and mixed (/K 1, each row tagged
one-dimensional) with end-of-line codes and without. Decoding /K 1 as
one-dimensional, or ignoring EncodedByteAlign, now fails a test.
/EndOfLine is passed to the decoder, but no input here tells it apart:
the decoder accepts end-of-line codes either way, as ISO 32000-2
(Table 11) requires.
From reviews with the pdfcraft-review skill.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01P6yUtvWGPsJpMLyh6pxSXG
Redaction doesn't decode CCITT yet, so a mark over part of a picture
Create PDF stored as Group 4 removes the whole picture (nothing leaks);
before this PR such pictures were eight-bit Flate and had only the
covered pixels cleared. The create README and the image-to-PDF parity
note say so; #4384 adds CCITT to redaction. The workspace's comment on
hayro-ccitt says Export uses it, not only tests.
From reviews with the pdfcraft-review skill.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01P6yUtvWGPsJpMLyh6pxSXG
- An indexed image's lookup table given as a stream was decoded without
its /DecodeParms when they came by reference, so a PNG predictor's tag
bytes ran into the colours (red and blue came out [2,255,0] and black).
It decodes through with_direct_parms now, as the samples do. This was
already so on main; #4320 makes the same change.
- Tests for what this PR claims and no test held: Group 3 one-
dimensional data exports as its picture (mapping /K 0 to Group 4 gave
all white and passed); CCITT soft and stencil masks export as the same
masks in Flate (decoding them plainly dropped them and passed); a
Flate image's predictor given by reference reads as direct; and a
1-bit TIFF is stored as Group 4 (the TIFF test said "a 1-bit one" but
wrote eight bits; its comment now says what it writes).
From reviews with the pdfcraft-review skill.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01P6yUtvWGPsJpMLyh6pxSXG
An eight-bit grey image of only black and white was packed to one bit
and stored, and the grey settings never saw it. For a dithered scan that
is bigger than what Reduce File Size made of it before, downsampled to
JPEG: 1-bit Flate can't shrink the dots (a 1200 × 1500 dither at 300 ppi
was 157 KB packed, 67 KB as before). Both are made now, and the smaller
as stored wins, counting a soft mask resampled with the image. Clean
text still packs to one bit. The packing also decodes no further than
its samples can need, as the other image steps do now.
From reviews with the pdfcraft-review skill.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01P6yUtvWGPsJpMLyh6pxSXG
Packing eight-bit black-and-white grey to one bit decoded with
Stream::decoded, which ignores /DecodeParms given by reference. With PNG
predictor 10 each row then kept its tag byte, a 0, so the shifted rows
still passed as black and white and were packed and stored skewed. It
now decodes through Document::with_direct_parms (#4304), and the test
of images with their parameters by reference covers this case.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01BfMGHQNgdq5yf5tKZHGR3z
Stream::decoded reads only direct parameter dictionaries, so an image
behind [/FlateDecode /CCITTFaxDecode] whose Flate entry is a reference
lost its predictor, and the CCITT decoder got the predictor's bytes; a
plain Flate image with its predictor given by reference was misread the
same way. Export now decodes through
pdfcraft_cos::Document::with_direct_parms (#4304), as the optimizer
does.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01BfMGHQNgdq5yf5tKZHGR3z
A fax image with /Filter [/ASCII85Decode /CCITTFaxDecode], say, was
skipped: only a lone CCITT filter went to the CCITT decoder. Now the
filters before it are undone first, and its parameters are the
/DecodeParms entry at its own place in the array (ISO 32000-2 §7.4.1),
not the first.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01BfMGHQNgdq5yf5tKZHGR3z
A CCITT image whose /K, /Columns or /Rows is an indirect integer was read
with the defaults (K 0, 1728 columns), and one whose /Rows is below its
/Height was cut short and skipped. The numbers are now resolved, and the
image is decoded up to its /Height rows whatever /Rows says, still bounded
by the size the export checked (review of #4335).
The doc comment of the optimizer's bilevel step now says what Retain
leaves to the grey settings.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01BfMGHQNgdq5yf5tKZHGR3z
A CCITT image whose /DecodeParms is a one-element array (common beside
/Filter [/CCITTFaxDecode]) was decoded with the default parameters: K 0
and 1728 columns. Wider scans were skipped, and a fax 1728 wide could be
misread. The parameters are now read from a dictionary or the one in an
array (ISO 32000-2 §7.4.2). The module doc no longer lists CCITT as
undecodable.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01BfMGHQNgdq5yf5tKZHGR3z
Group 4 images (now written by Create PDF and the optimizer) would
otherwise stop exporting: they were reported as "can't be exported
yet". A CCITT fax image (its only filter) is decoded through
hayro-ccitt with its /DecodeParms (K, Columns, Rows, EndOfBlock,
EndOfLine, EncodedByteAlign, BlackIs1), masks included; /Columns has to
be the image's width, so a hostile value can't size the buffers.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01BfMGHQNgdq5yf5tKZHGR3z
An eight-bit grey image whose samples are all 0 or 255 is packed to one
bit per pixel and then stored as Monochrome Images asks (Group 4, or
JBIG2 with #4320), when that is smaller as stored; its decode array
stays. Indexed images, a colour-key /Mask and Retain are left alone.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01BfMGHQNgdq5yf5tKZHGR3z
A scan saved as a 1-bit PNG decodes to eight-bit grey and was stored
that way, larger than the PNG it came from; a bilevel TIFF was stored at
one bit but with Flate. Now any image of only pure black and white
(1-bit, eight-bit grey, a two-colour palette, RGB without a profile) is
stored at one bit per pixel, as CCITT Group 4 or Flate, whichever is
smaller as stored. A grey profile stays; RGB with a profile keeps its
colours.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01BfMGHQNgdq5yf5tKZHGR3z
Copy Image and Copy Image in Original Format go through Export's
decoder, which reads JBIG2 now, so the view.copy-image parity note no
longer lists JBIG2 as missing. docs/target-app-parity.md's optimize row
lists JBIG2 symbol coding and lossy JBIG2 as missing instead of
monochrome JBIG2, with a status line and a revision row.
From reviews with the pdfcraft-review skill.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01P6yUtvWGPsJpMLyh6pxSXG
With compatibility retain, doc_optimize reports the later of the
header's version and the catalog's /Version. It read /Version only when
it was direct, so a catalog saying 1.6 by reference was reported as the
header's 1.4. It is now resolved first, as the optimizer reads it
(a88c8afb). The bug was already on main; found in pre-push review as a
sibling of that fix.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01P6yUtvWGPsJpMLyh6pxSXG
Export ▸ Images skips an image whose JBIG2 page has another width or
more pixels than an export takes; a JBIG2 stencil mask refused the same
way is left out and the image exported opaque, as JPX and CCITT masks
are, which the export test now checks. The README and parity note said
only "is skipped". And redaction doesn't decode JBIG2 or Group 4 yet,
so a mark over part of an image the optimizer stored either way removes
the whole image; the optimizer README and parity note now say so (#4384
adds Group 4). Found in pre-push review.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01P6yUtvWGPsJpMLyh6pxSXG
When the optimizer stores an image as JBIG2 (PDF 1.4), it raises the
catalog's /Version for an older file. It read /Version only when it was
direct: a catalog saying 1.7 by reference looked like no version at all,
and was set to /1.4, lowering the document. It is now resolved first.
Found in pre-push review.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01P6yUtvWGPsJpMLyh6pxSXG
The export checked an image's /Width × /Height against its 100-million-
pixel budget, and the JBIG2 page's width against /Width, but not the
page's height. The decoder decodes the whole page, rows past the
image's height too, and takes pages of up to about 2^28 pixels: a
20,000 × 4 image over a 20,000 × 10,000 JBIG2 page cost 200 million
pixels of decoding to export four rows. The page itself is now held to
the budget before it is decoded. Found by CodeRabbit on #4320.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01P6yUtvWGPsJpMLyh6pxSXG
The optimizer README's and optimize.mono-compression's "not yet" lists
said rows wider than 32,767 samples aren't stored. That is Group 4's
limit (MAX_G4_COLUMNS); JBIG2 takes rows of up to 1,048,576
(MAX_JBIG2_COLUMNS). Found by CodeRabbit on #4805.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01P6yUtvWGPsJpMLyh6pxSXG
Export ▸ Images and Save Image As decoded an image with
Stream::decoded, which reads /DecodeParms only when it is direct. An
image whose PNG predictor came by reference (the dictionary, an entry
of an array, or the numbers inside) kept its row tags in the samples,
and the picture came out shifted. The same was true of an indexed
image's lookup table given as a stream, and of a JBIG2 image's
/JBIG2Globals stream, which then couldn't be read, so the image was
skipped. All three now decode through Document::with_direct_parms
(#4304), as the optimizer does, and a test exports each. Found by
CodeRabbit on #4805; the image decode was already this way on main.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01P6yUtvWGPsJpMLyh6pxSXG
fa.tsv lacked the row: Persian came to main after it was written. It goes after "CCITT Group 4",
worded like the Arabic and Kurdish rows. id.tsv had it as an English copy beside rows it
translates; it now says "tanpa kehilangan", as de, tr and vi translate "lossless".
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01P6yUtvWGPsJpMLyh6pxSXG
JBIG2 images, and JBIG2 stencil masks, were reported as "can't be exported
yet", so an image the Optimizer stores as JBIG2 would stop exporting. They
are now decoded with hayro-jbig2 (already in the tree through hayro), with
their /JBIG2Globals from a DecodeParms dictionary or array, as JBIG2Decode
gives them: black as 0 (ISO 32000-2 §7.4.7). Unreadable globals, a JBIG2
page of another width, or fewer rows than the image skip the image; rows
past its height are dropped, so the output is bounded by the checked size.
docs/pdf-spec-parity.md §7.4 no longer says there is no JBIG2 encoding.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01BfMGHQNgdq5yf5tKZHGR3z
pdfcraft_filters::encode_jbig2_generic writes 1-bit rows as a JBIG2
stream for JBIG2Decode (embedded organisation: a page information
segment and an immediate lossless generic region, no globals): template
0 with its nominal AT pixels, typical prediction, and the MQ arithmetic
coder (mq.rs), written from the JBIG committee's ISO/IEC 14492 Final
Committee Draft. The coder reproduces its Annex H.2 test sequence byte
for byte; output round-trips through hayro-jbig2, and Poppler renders
it the same as the original.
The optimizer's Monochrome Images gets JBIG2 (lossless) beside CCITT
Group 4 (still the default), doc_optimize mono jbig2; a document below
PDF 1.4 gets /Version /1.4 in its catalog. On 300 dpi text JBIG2 is
about a third smaller than Group 4.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01BfMGHQNgdq5yf5tKZHGR3z
docs/pdf-spec-parity.md's §7.4 row still said there was no CCITT
encoding; it names the Optimizer's Group 4 encoder now, with a status
line and a revision row.
From reviews with the pdfcraft-review skill.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01P6yUtvWGPsJpMLyh6pxSXG
- Not only Export ▸ Images refuses a CCITT image until #4335: so does
everything that exports an image through it. Save Image As refuses
it, Copy Image fails, and Word, PowerPoint and HTML export leave the
picture out, with the page not reported. The optimize README and the
mono-compression parity note name them.
- optimize.mono-compression is partial now, so docs/target-app-parity.md
counts it on the table's own measurement: K Optimize and standards 15
shipped and 11 partial of 58 (35.3%), breadth 57.0% (423 + 75 of 808),
mainstream 63.3% (292 + 45 of 497), with a status line and a revision
row. ROADMAP.md's breadth rows and its K row say the same.
From reviews with the pdfcraft-review skill.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01P6yUtvWGPsJpMLyh6pxSXG
The optimizer's images decode no further than twice their samples plus
a byte a row, meant for ASCIIHex text under Flate; but hex text broken
into lines, as it usually is, is a little more than twice, so such an
image was left alone as if it were a decompression bomb (a 300 dpi
letter scan stayed Flate). It is three bytes for each now, a separator
for every two digits, and a test stores both images as hex text in
lines of 64 digits.
From reviews with the pdfcraft-review skill.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01P6yUtvWGPsJpMLyh6pxSXG
- Redaction doesn't decode CCITT, so a mark over part of an image the
optimizer stored as Group 4 removes the whole image (nothing leaks),
and Export ▸ Images refuses it. The optimize README and the
mono-compression parity note say so. Later PRs of this stack add both
(#4335 export, #4384 redaction).
- doc_reduce's description, Engine::reduced_bytes and docs/cli-batch.md
now list the black-and-white step; docs/target-app-parity.md's
optimize row gives the measured counts and no longer lists CCITT as
missing; the M11 milestone row lists it as done.
From reviews with the pdfcraft-review skill.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01P6yUtvWGPsJpMLyh6pxSXG
A test now covers what qualifies and what doesn't: an ICC profile of
one component and a DeviceN of one colourant convert, three components
and two colourants (more than a bit a pixel) don't; an image mask
converts with /BitsPerComponent 1 given, not with 8; an image of exactly
80 million pixels converts, one row more doesn't. The byte totals are
checked exactly. Each of those rules could be broken before with no
test failing (cargo mutants). one_component's comment now says /G
counts with DeviceGray, as the code does.
From reviews with the pdfcraft-review skill.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01P6yUtvWGPsJpMLyh6pxSXG
A 1-bit image was decoded for Group 4 up to MAX_DECODED (1 GiB), so a
few kilobytes of Flate could cost a gigabyte, and the same held for the
samples of a colour or grey image read to resample it (pixels). Both now
stop at twice the samples plus a byte a row and 4 KiB, as redaction
does; data past that can only be a decompression bomb, and the image is
left alone.
From reviews with the pdfcraft-review skill.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01P6yUtvWGPsJpMLyh6pxSXG
The decoders leave /Crypt out wherever it stands (Stream::filters), so
a chain of /Crypt and eight other filters decodes, but with_direct_parms
counted nine and left its parameters as they were: a predictor given by
reference was then skipped. Only the other filters count now, and a
/Crypt entry is null in the copy, as no decoder reads it. Tests cover
that chain and one exactly as long as a decoder takes.
From reviews with the pdfcraft-review skill.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01P6yUtvWGPsJpMLyh6pxSXG
Document::with_direct_parms resolved an indirect /DecodeParms and its
array entries but not the numbers inside (/Predictor 9 0 R), which
Dict::int doesn't follow. A 1-bit image with such a predictor was
decoded without it, its rows shifted by their tag bytes, and Group 4 of
that stored in its place; resampling read images the same way. It now
keeps, of each parameters dictionary, the numbers and flags the decoders
read, resolved, and /JBIG2Globals as a reference. Only those small
values are copied (an entry that is no dictionary is null), so a file
naming one big object from every key and filter can't have it copied a
hundred times.
The change is #4384's, moved down so that every PR stacked on this one
reads such parameters.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01P6yUtvWGPsJpMLyh6pxSXG
Persian came to main after these rows were written, so fa.tsv had neither "Monochrome Images"
nor "CCITT Group 4". They go beside "Grayscale Images", worded like the Arabic and Kurdish rows,
with the Persian digit the catalogue uses elsewhere ("AES ۱۲۸-بیتی").
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01P6yUtvWGPsJpMLyh6pxSXG
Stream::decoded reads only direct parameter dictionaries, so an image
whose /DecodeParms is a reference (whole, or as array entries) was
decoded without its predictor. For a 1-bit image with a PNG predictor
the rows came out shifted by their tag bytes, Group 4 of that was still
smaller, and the picture was replaced by a skewed one; resampling and
merging image strips read the same way.
pdfcraft_cos::Document::with_direct_parms gives the stream with the
parameters its filters use made direct: only the entries at the
filters' places, and none for a chain longer than any decoder takes,
so at most MAX_CHAIN objects are copied. The optimizer's pixels() and
the Group 4 step decode through it.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01BfMGHQNgdq5yf5tKZHGR3z
A bare /Indexed, /I or /CalGray is no colour space on its own, so it can
only name a resource, which might be RGB: such an image is now left
alone instead of being read as one bit per pixel. doc_optimize refuses a
mono that isn't an object or a compression that isn't a known name,
instead of reading it as the default (from CodeRabbit's review).
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01BfMGHQNgdq5yf5tKZHGR3z
pdfcraft_filters::encode_g4 encodes packed 1-bit rows as Group 4 (ITU-T
T.6, /K -1) through the fax crate (MIT, already in the tree via tiff),
with rows capped at 32,767 samples so its 16-bit positions can't
overflow; round trips are checked against hayro-ccitt.
The optimizer (Settings::mono, CCITT G4 by default, so Reduce File Size
too) re-encodes a 1-bit image of one colour component, or an image
mask, stored with no filter or general-purpose ones, when that is
smaller as stored. The samples decode to the same bits, so colour
space, decode array and masks stay. PDF Optimizer gets a Monochrome
Images row and doc_optimize a mono option. optimize.mono-compression
goes from planned to partial (JBIG2 and monochrome downsampling not
yet).
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01BfMGHQNgdq5yf5tKZHGR3z
* Make PdfCraft's app colour red
The icon tile, the Windows PDF file icon's badge and lines, the DMG background and the README
badges move from green #12a58a to crimson #b70228 (darker shade #8a011e, fold #f3cfd6).
Every PNG, .ico and .icns is re-rendered from the edited master SVGs with packaging/icons.sh
and resvg 0.47; the .icns is written with Pillow because iconutil is macOS-only, with
iconutil's size set. The DMG background is re-rendered with generate.py; its .DS_Store is
unchanged. ATTRIBUTION.toml hashes updated; cargo xtask assets passes.
* Fix OCR model attribution hashes
With Add text the page's own paragraphs took input only while the pointer was over one
(over_source), and their drags end in edit_text_ui::page_input. A paragraph dragged off its box
was left hanging after the release (block_drag), to land wherever the pointer next met a
paragraph; one flicked off in its first move never started, so nothing moved. main has the same
test. Add text now also acts on the paragraph the page router says holds the press, until the
button is up, so the drag ends where it is released, as with Edit text, and Add text's
new-box path does not take the press over.
New test add_text_finishes_a_paragraph_drag_that_leaves_its_box, seen failing before the fix
(the drag still pending after the release); the flick was checked by hand the same way. From
CodeRabbit's third review of #5300.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
A click acted on what its press was on wherever the button came up: a press on a link, a push
button, a signature field or a list box that slipped off it before the release (still a click to
egui, within 6 px) followed the link, ran the button's action, opened signing or picked a list
box's option. On main a click went to what lay under its release. Now it needs both: the
link's or the fields' hit test at the release point must give what the press was on, as a button
pressed and released off itself does nothing. Check boxes and radio buttons already did so, by
their overlay's click-outside test.
New tests a_press_on_a_link_released_off_it_follows_nothing and
a_press_on_a_button_released_off_it_runs_nothing, seen failing with this commit's source
reverted; the check box test shares their slipping_click helper. From CodeRabbit's second review
of #5300.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
With Add text, the page router's hits kept only the paragraphs' bodies (3d14ffd7), so a click
just inside a closed paragraph's left or right edge, within the edge's grip, had no owner: it
neither opened the paragraph (over_source counts the point as the paragraph's) nor started a new
box. Add text now keeps a paragraph's hit wherever the point lies in a paragraph's box, edges
included, by the same test as over_source (edit_text_ui::over_paragraph), and drops it only
beside the box, where a click starts a new box. The edge's grip shows there again, and a drag
from it rewraps the paragraph, as on main.
New test add_text_opens_a_paragraph_from_just_inside_its_edge, seen failing with this commit's
source reverted. From CodeRabbit's second review of #5300.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Review is right that `Stack::push` always returned `Some(())`, so `overflowed`
never became true and the whole-instruction discard was dead code.
Making it live breaks the page. `an_operator_with_hundreds_of_operands_does_
not_end_the_content` (#4260) puts 300 stray operands before `0 1 0 rg` and
asserts the `rg` still reads its own three: with the discard alive the fill
stays the previous red, measured as `left: [255, 0, 0]` against
`right: [0, 255, 0]`.
The ring buffer already gives the right answer. It keeps the newest operands,
which are the ones nearest the operator -- its own -- and no operator takes
anywhere near 256 of them: `scn` takes one per colourant and ISO 32000 allows a
DeviceN space 32. So the strays fall off the back and the operator is applied to
its own operands, which is what Acrobat and Chromium do. Dropping the
instruction would lose content that is there to be read.
The dead branch and the flag are gone, `push` no longer returns a result it
cannot produce, and a test pins what the buffer does: the strays are `1` and the
operator's own operand is `0`, so the two answers differ. Keeping the oldest
operands instead fails it at 256 strays.
With Add text, the page router's hits included Edit text's pictures and paragraph edges, which
nothing acts on with Add text, and Add text starts a box only where nobody owns the press: on a
scanned page (a picture filling it) no click placed a box, a click within a paragraph's edge
grip beside it did nothing, and the cursor over a picture was the hand. Add text now has only
the paragraphs' bodies, over their text, where it finishes the box being typed (over_source).
New test add_text_places_a_box_on_a_picture_and_beside_a_paragraph, seen failing on the
previous commit. From CodeRabbit's review of #5300.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
A delete moves the panel's inline editor along with its comment or reply,
but Undo and Redo cleared only the selection. Either can put annotations
back or take them away, so the editor stayed keyed to an index that could
now be another reply: with B's editor open, delete reply A, Undo, and Save
wrote B's draft over A. history_step now closes the editor (and its
unsaved text) with the selection. Found by FredApps in review.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
No conflicts. main's changes to the files this branch touches (the page
cursor router in canvas.rs, hover tips in tools/comments, new tools and
document methods) don't meet this branch's hunks.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
