The decoder has the same 2^28 cap as decode_jbig2, and can refuse a page first, so the doc says either
error can come. The page at the cap decodes, which the test now asserts, rather than failing later.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01AmsdeUCdTaD72jkDw2pJKY
The test said such a page is refused here, as Unsupported. #5491 makes hayro-jbig2 refuse it when
the stream is opened, as Corrupt, so whichever of the two PRs landed second would fail this test.
A page past the cap is refused either way, and that's what the test now says.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01AmsdeUCdTaD72jkDw2pJKY
decode_jbig2 sits next to decode_ccitt, through hayro-jbig2 as Export ▸ Images
used it, and shares CCITT's row sink. The JBIG2 page has to be the image's size:
PdfCraft's renderer draws the whole page into the image (black box: a 4-row page
behind /Height 2 fills the image box with all four rows), so the rows of a taller
page aren't the image's. The decoder decodes a page whole, so the page is checked
before it is decoded: that size, within the caller's bound as rows of one bit, and
at most 2^28 pixels (MAX_JBIG2_PIXELS; the decoder keeps a bit a pixel, about 34 MB
there).
Document::decoded_image_within decodes a JBIG2 image as it does a fax image: the
filters before it undone first, then the decoder with the /JBIG2Globals of the
image's own /DecodeParms entry (/Crypt counts in the position; fax_params and the
globals now share last_filter_parms). Globals have a limit of their own,
MAX_JBIG2_GLOBALS (32 MiB, moved from Export), and globals that can't be read are an
error rather than ignored.
Export ▸ Images reads JBIG2 through it, so its own decoder, row sink and DecodeParms
reader go, and hayro-jbig2 leaves pdfcraft-create. JBIG2 behind another filter now
exports, and so copies (Copy Image uses the same function); a page taller than the
image, which Export cut to the image's rows, now skips the image, as one of another
width did. doc_export_all_images' description no longer lists JBIG2 inside other
filters as skipped.
The optimizer's monochrome step read images through decoded_image_within and
relied on JBIG2 failing there: it now leaves JBIG2 images alone explicitly, as
before (a resampled one would come out Flate under Retain), and the README and
parity note list them as not yet handled.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Includes #4325#1952#4180#2529#4320#4805, preserving their original histories.
Keep paragraph alignment and hard/soft wrap metadata together; retain CCITT/downsampling/RGB ownership guards with bounded JBIG2 export and exact-copy symbol encoding.
Combined interaction regressions added. Validation pending.
Review of the previous commit:
- Nothing checked the segment numbers the region split assigns: a
mutant numbering every region 2 decoded. The many-marks test now
reads each segment's number, and has a bar too tall to be a symbol,
so the generic region is numbered after the last text region.
- The decoder's 32,767-symbol limit was checked against all distinct
marks, before either plan, so an image with more distinct marks lost
the second plan, which codes only the repeated ones. The limit now
applies to each plan (MAX_CODED_SYMBOLS); finding marks keeps its
memory bound of 65,536 (MAX_SYMBOLS), as before the previous commit.
A test has 32,768 distinct marks above a page of repeated text, which
encode_jbig2 still symbol codes through the second plan.
- The dense-page optimizer test now checks that it takes several text
regions, and a compile-time assert keeps segment numbers within a
byte's reach.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01P6yUtvWGPsJpMLyh6pxSXG
A review found that a dense page came out as a stream PdfCraft's own
renderer refuses, so the page drew blank after optimizing: hayro-jbig2
decodes a text region of at most 10,000 symbol instances, and refuses
32,768 symbols or more. The stream was valid (Poppler decoded it), but
every mark went into one text region and up to 65,536 symbols were kept.
A 300 dpi letter page of the optimizer test's own text crossed it.
A page with more than 10,000 marks is now placed by several text
regions, each over a band of rows and all referring to the one symbol
dictionary, which each region but the last keeps retained (7.2.4). Past
32,767 distinct symbols the image is coded generically.
New tests: 25,000 copies placed by three regions, which decode; the
symbol caps decoded, not just reached; and in the optimizer, a whole
letter page of rendered text that looks the same as JBIG2 symbols (it
drew blank before). The READMEs say "still looked at" for the caps, and
that the scans figure is the six pages' total (20% on one page).
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01P6yUtvWGPsJpMLyh6pxSXG
A second review found two rules tested one way only: a mark 257 tall
(not just wide) is left to the generic region, which also bounds the
bitmap allocated for each mark, and runs joined at the lower-left corner
are one mark. The test now has a 1 x 257 column and an anti-diagonal.
The caps on distinct symbols (65,536) and their pixels (2^24) are tested
at and past them, as the run and row caps are.
The scans figure now names its noise: with 2% or more of the letters'
edge pixels flipped, symbols save at most 8% over the generic region.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01P6yUtvWGPsJpMLyh6pxSXG
Review found behaviour the tests let break unnoticed (each was a
surviving mutant, and each new test fails on it):
- black padding bits: a run reaching past the row would stop symbol
coding on many scans;
- Annex A's 32-bit range and PREV at exactly 256, where a decision would
go uncoded: coordinates past 4,435 on a 12,000-pixel-wide and a
10,050-row page, and the contexts of 4436's coding;
- marks joined at a corner are one mark; 256 pixels a side is a symbol,
257 is left to the generic region;
- the run and row caps, at and past them.
The roadmap's status line for this change now comes first, and the
"about a third smaller than Group 4 on scans" figure is replaced by what
was measured: 27-33% on the same pages with scan-like noise added.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01P6yUtvWGPsJpMLyh6pxSXG
pdfcraft_filters::encode_jbig2 stores each distinct mark of a 1-bit
image (8-connected black pixels, at most 256 a side) once, as a symbol
in a symbol dictionary, and places its exact copies with an immediate
lossless text region that refers to it. Larger marks, and in a second
plan marks that occur once, go to a generic region over their box. It
keeps whichever of that and the generic coding (encode_jbig2_generic,
unchanged) is smaller. Only exact copies share a symbol, so the stream
decodes to the same bits.
Written from the JBIG committee's ISO/IEC 14492 Final Committee Draft:
6.4 and 6.5 (text region and symbol dictionary decoding), 7.2, 7.4.2
and 7.4.3 (segment headers and syntax) and Annex A (the integer coders,
checked against its worked example and Table A.1).
On six pages of rendered 300 dpi text the output is 28% of the generic
coding's size and 17% of Group 4's, at about 100 ms a page; hayro-jbig2
and Poppler (pdfimages) both decode it to the original bits. Scans,
whose copies of a letter are seldom identical, gain little: that needs
refinement coding. A dictionary shared between pages (/JBIG2Globals)
is a further step.
The optimizer's Monochrome Images > JBIG2 (lossless) and doc_optimize
mono jbig2 use it.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01P6yUtvWGPsJpMLyh6pxSXG
decode_ccitt reads byte-aligned Group 3 whose data has end-of-line codes
but none before the first row (not as T.4 sends them) on bytes. At /K 0
with the fill ending each code on a byte, about one small picture in
five is then read as other rows; at fax width almost none are, as such
pages come out short and are refused. Export already said so. The
optimizer, when it resamples such an image or stores it again as Group 4
from behind another filter, and redaction, when it clears pixels in one,
write those rows back, and nothing said that.
Black-box, PdfCraft's renderer draws such an image exactly as
decode_ccitt reads it (all 42 misread of 200 seeded pictures, behind
ASCII85Decode too), so the written image is what PdfCraft showed before.
Refusing such data instead (a code after nearly every row but none
first) would also refuse some ordinary Modified Huffman images, whose
rows can meet 11 zeros by chance (0.5 to 5% of small ones in a
black-box probe), so the limit is stated rather than guarded: in
decode_ccitt's doc, the filters, optimize and redact READMEs, and the
core.image-filters and mono-compression notes. The optimize README's and
the mono-compression note's "not yet: Group 3 to Group 4 without
resampling" now say a lone Group 3 image: one behind another filter is
stored again as Group 4.
Also from the review: docs/roadmap.md keeps #4335's status line under
this PR's, rather than replacing it; the filters README's tests and the
core.image-filters evidence name the Group 3 layout test; the filters
crate's description names Group 3 and 4 decoding.
From reviews with the pdfcraft-review skill.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01P6yUtvWGPsJpMLyh6pxSXG
The rule came into decode_ccitt with the decoding it moved from Export ▸
Images (#4335's "Export reads byte-aligned Group 3 by the codes in its
data"), where the create test checks it through the export. Here it gets
tests of its own:
- 32 seeded text-like pictures, 8 to 207 samples wide, at k 0 and 1, in
each layout (no codes, with end_of_line and without; codes, each
starting on a byte or ending on one, with and without). Each decodes to
its picture and, a byte short, to fewer rows, not to other rows read
another way.
- Group 4 rows on bytes keep their aligned read, end_of_line or not.
- The any-input property varies end_of_line and encoded_byte_align too.
With the rule this replaced (rows on bytes read unaligned under
end_of_line, aligned otherwise) the test fails; cargo-mutants leaves no
mutant of the rule's lines alive. The filters README says how rows on
bytes are read.
From reviews with the pdfcraft-review skill.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01P6yUtvWGPsJpMLyh6pxSXG
The PDF Optimizer and Reduce File Size downsampled colour and grey images
but not black-and-white ones. Settings::mono is now MonoSettings {
downsample, target_ppi, above_ppi, compression }, 300 ppi above 450 ppi
and CCITT Group 4 by default (Monochrome Images ▸ Downsample to;
doc_optimize mono: { downsample, ppi, above_ppi, compression }).
A 1-bit image or image mask (no filter, general-purpose filters, or CCITT
fax after any of them) and eight-bit grey of only black and white are averaged by
area: each new pixel takes the sample covering more of it, a tie 0, so a
dark line half a new pixel wide stays. They are stored as Group 4, or as
1-bit Flate when that is smaller; with Retain a resampled image keeps its
kind of compression. Images with a soft mask keep their size.
CCITT decoding moves from Export ▸ Images into pdfcraft-filters
(decode_ccitt, CcittParams, through hayro-ccitt), and
pdfcraft_cos::Document::decoded_image reads a fax image's /DecodeParms
for it (undoing filters before CCITT, such as ASCII85Decode, with any
/DecodeParms given by reference made direct first), so export
and the optimizer share one reader, and Group 4 scans can be
downsampled. A 600 ppi text page went from 79 KB to 40 KB.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01BfMGHQNgdq5yf5tKZHGR3z
JBIG2 images, and JBIG2 stencil masks, were reported as "can't be exported
yet", so an image the Optimizer stores as JBIG2 would stop exporting. They
are now decoded with hayro-jbig2 (already in the tree through hayro), with
their /JBIG2Globals from a DecodeParms dictionary or array, as JBIG2Decode
gives them: black as 0 (ISO 32000-2 §7.4.7). Unreadable globals, a JBIG2
page of another width, or fewer rows than the image skip the image; rows
past its height are dropped, so the output is bounded by the checked size.
docs/pdf-spec-parity.md §7.4 no longer says there is no JBIG2 encoding.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01BfMGHQNgdq5yf5tKZHGR3z
pdfcraft_filters::encode_jbig2_generic writes 1-bit rows as a JBIG2
stream for JBIG2Decode (embedded organisation: a page information
segment and an immediate lossless generic region, no globals): template
0 with its nominal AT pixels, typical prediction, and the MQ arithmetic
coder (mq.rs), written from the JBIG committee's ISO/IEC 14492 Final
Committee Draft. The coder reproduces its Annex H.2 test sequence byte
for byte; output round-trips through hayro-jbig2, and Poppler renders
it the same as the original.
The optimizer's Monochrome Images gets JBIG2 (lossless) beside CCITT
Group 4 (still the default), doc_optimize mono jbig2; a document below
PDF 1.4 gets /Version /1.4 in its catalog. On 300 dpi text JBIG2 is
about a third smaller than Group 4.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01BfMGHQNgdq5yf5tKZHGR3z
pdfcraft_filters::encode_g4 encodes packed 1-bit rows as Group 4 (ITU-T
T.6, /K -1) through the fax crate (MIT, already in the tree via tiff),
with rows capped at 32,767 samples so its 16-bit positions can't
overflow; round trips are checked against hayro-ccitt.
The optimizer (Settings::mono, CCITT G4 by default, so Reduce File Size
too) re-encodes a 1-bit image of one colour component, or an image
mask, stored with no filter or general-purpose ones, when that is
smaller as stored. The samples decode to the same bits, so colour
space, decode array and masks stay. PDF Optimizer gets a Monochrome
Images row and doc_optimize a mono option. optimize.mono-compression
goes from planned to partial (JBIG2 and monochrome downsampling not
yet).
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01BfMGHQNgdq5yf5tKZHGR3z
Every stage of a stream's filter chain could produce up to the output
limit and nothing bounded the number of stages, so a long /Filter array
over data that decodes to itself (FF FF under RunLengthDecode) repeated
the full work once per array entry. Chains of more than eight filters
are unsupported, like an image codec, and stay encoded.
The app, crates, binaries, bundle id, packaging, icons, screenshots and docs are now
PdfCraft / pdfcraft (repo storytold/pdfcraft). On first launch the desktop app moves the
PrintCraft settings and crash-recovery folders to the new name, and both apps read settings
saved under the old storage key, so upgrades keep recent files, preferences and unsaved work.
The signing test fixtures keep their PrintCraft subject names (they are binary).
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
- js: `host()` returns a script error instead of panicking when the host state is missing.
- optimize, a11y: the graphics-state stack is read with `last`/`last_mut` instead of `expect`.
- fonts: the standard-14 ASCII map is built from `u8`, which can't fail.
- filters: zlib encoding into a `Vec` keeps the standard's narrow, documented `expect` exception.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
