Ctrl+Z is left to a focused text field, so in the paragraph editor it
went to the box's own Undo history. That history still held the
paragraph's text from before the last formatting change, so Ctrl+Z put
it back into a box laid out for the page after the change, a layout
the page never had, and the document kept the change. The box shared
its id across paragraphs too, so it could put back another paragraph's
text.
The history of the paragraph editor and the added-text box now starts
at what the page has. Undo and Redo keep the keys only while the box
holds typing the page doesn't have; then they reach the document. An
open box is applied (as clicking away applies it) and closed before an
Undo or Redo step, so it never shows a state the document has left;
text it can't apply keeps it open and stops the step.
Opening a centred or right-aligned Add text box drew its text at the left
edge, a layout the box never had, and Ctrl+Z inside the box (which goes to
the text, not the document) left it showing that way. The editor now lays
the text out with the box's alignment. Justified text is still shown
left-aligned while editing (TextEdit can't justify).
CodeRabbit: a recognition run reads a snapshot of the document and its result
names a page by index. If the document changed while it ran (a page deleted or
moved), Session::apply_ocr would put the words on whatever page now has that
index. An Edit-started run now remembers the page and the document's edit
generation (AutoOcr); when its result arrives after a change it is dropped and
the page's "tried" mark is cleared so the page in view is judged again. A run
the user asked for is unchanged. The unit test uses a made-up result (no OCR
models) and fails without the check.
Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>
Rebasing onto main met its annotation listing fixes (c82dc91a, dfde9078):
inspect now lists each annotation once, at the first page and position
that lists it, told apart by the object its reference chain ends at,
and reads a page-shared /Annots array under its first page only. The
rebase collects reply slots in that same pass and matches /IRT by the
object it resolves to, so a reply finds its comment wherever the
listing keeps it.
The test fails with the slots keyed by the raw /Annots reference (as
before the rebase) and with /IRT matched by its raw reference.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
`link_replies` makes an annotation whose /IRT leads nowhere a comment of
its own. For a status or checkmark that meant a card in the Comments
panel (and an invisible hit area on the page, and a root in
comment_list) that the header's count left out; before threading by
reference, most of these were hidden. The realistic case is a comment
deleted from another page than its status replies.
`Annotation::is_comment` (not a reply, not a status or checkmark) is now
the one test for "listed as a comment": the panel's cards, page badges,
filter menus and count, the page's hit-testing, comment_list's roots and
the summary all use it. A Replace Text caret still shows in its
strikeout's card: it holds the replacement text, and the count already
treats the pair as one comment.
From CodeRabbit review on #4061.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
From review:
- `link_replies` only finds parents among the annotations both readers
list, and neither lists links, form widgets, pop-ups or other
non-markup annotations (`is_comment_subtype`), so an /IRT to one of
those leaves its annotation a comment of its own. Its doc comment now
says so; the UI edge-case test adds an /IRT to a link and to a form
field, and the engine test an /IRT to a link (after an edit too).
Both fail if a reader lists links as comments.
- The Comments panel's grouping comment now says that a status or
checkmark set on a reply, at any depth, is that reply's: the card's
badge and checkmark leave it out, and comment_list reports it on the
reply.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
The previous commit filed a status or checkmark under the annotation it
was set on, but comment_list only reported states for comments, so one
set on a reply dropped out of the listing. Each reply in `replies` now
carries its own `status` and `marked`, read the same way as a
comment's, and the tool description says so.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
A status or checkmark is a state reply whose /IRT names the annotation
it applies to (ISO 32000-2 §12.5.6.2). comment_list gathered state
replies at any depth of a thread (since #839 listed nested replies), so
a checkmark or status set on a reply was reported as the comment's own,
while the Comments panel, comment properties and the page's context
menu showed the comment unmarked. comment_list now files them under the
annotation they were set on, as the panel does.
A UI regression pins the card and the page's menu (it also fails if the
menu counts checkmarks at any depth), and an automation one pins
comment_list.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
The comment tools resolved `id` (the comment's /NM, as comment_list
reports it) to the first annotation with that name. /NM need not be
unique: in a PyMuPDF file every page's first comment is `fitz-A0`, so
comment_reply, comment_set_status and the rest acted on page 1's
comment whatever page the caller meant. A shared id is now refused
with a message pointing at `page` + `index`, which always name one
comment. A new end-to-end test also checks that comment_list threads
such a file by reference.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Follow-up to threading by /IRT reference, from review:
- An /IRT that reaches no listed comment (the annotation itself, a
loop, a pop-up, an object no page lists) left the annotation a reply
shown nowhere, though still counted. `link_replies` now settles the
links in both readers (inspect on open, the engine's list after an
edit): a reply keeps its parent only when the chain reaches a comment
within 64 steps, and anything else stays a comment of its own.
- A reply to a reply was never shown in the Comments panel (only
comment_list followed the chain, #806), but the new header line
counted it. The panel now files every text reply under the comment
its thread starts from (`thread_tops`); a status or checkmark stays
with the annotation it was set on.
- A Replace Text caret (/RT /Group) is grouped with its strikeout, not
a reply to it, so the header no longer counts it (new `grouped`
field on both readers).
- The engine summary and comment_list gather replies once instead of
rescanning every annotation per reply (quadratic on large reviews).
- Inspect takes the first listing in page order instead of a min over
an unordered map.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
The header keeps Acrobat's count of comments and adds the replies in
small text below it ("16 replies"), left out when there are none and
counting the whole document rather than the current search. Status
changes and checkmarks are not replies. The plural label is in all 33
catalogues with each language's plural forms; ATTRIBUTION.toml records
the new hashes and that the label is an AI-assisted translation not yet
reviewed by native speakers.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01KvugvPrjZtPVudhh7cMa54
Replies were matched to their parent by /NM across the whole document.
/NM need not be unique: PyMuPDF names the first comment on every page
`fitz-A0`, so every reply in such a file was filed under page 1's
comment, and the other pages showed none. Both comment readers (render
inspect on open, annot summaries after an edit) now resolve /IRT to the
parent's page and /Annots position by object reference, and the
Comments panel, comment properties, the canvas thread, the engine's
comment summary and the comment_list tool thread by that.
The Comments header now counts comments without their replies, as
Acrobat does (28 rather than 44 for the reported file), and a reply's
thread line runs from the avatar above it (the comment's or the
previous reply's) to its own instead of a 12 px stub.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01KvugvPrjZtPVudhh7cMa54
Local CodeRabbit review follow-ups for the expanded All tools view:
- The search field promises tools and commands, but an entry with a menu
(Watermark: Add, Update, Remove) matched only by its own name, so
"remove watermark" found nothing. Entries now also match by their menu
commands' names, in English or the UI language.
- With the command palette open over the view, Escape closed the view as
well as the palette. The palette now owns Escape, as dialogs do.
Each new test was seen to fail with its fix reverted.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
A content-only edit re-reads Document::added() and marks() only when the
edit itself is one that changes them. Edit::Batch has Scope::Content when
all its parts do, but content_refresh_lists never looked inside it, so a
batch of AddText/DeleteContent or AddWatermark edits left both lists stale
until the next full refresh or undo. It now answers for its parts.
Co-Authored-By: Opus 5.5 medium ultracode <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_017gEgu9NcTcPqKovsLyfPxK
* G14: Romanian: translate the 65 catalog rows still in English
The Romanian catalog landed in main through the integration branch
(bf3a199f, PR #2505); the keys main gained since were filled with English.
This translates them: calculation order, the zoom box, rich-text formatting,
print options, Pages thumbnail size, Reshape comment, the CMS signed-attribute
and short-RSA-key warnings, and the page-numbering Start and page Subset
labels. Romanian translations main already has (the text field table) are
kept as they are. ATTRIBUTION.toml carries the new SHA-256.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01JadgGo4G2GHaAMNb3qyygk
* G14: Romanian: quote „data” in the CMS warning; Subset reads Selecție
Review of #4016: the content type "data" is quoted so it isn't read as "the
date", and the page Subset label and the booklet subset label both read
"Selecție" instead of "Filtru" / the anglicism "Subset broșură".
ATTRIBUTION.toml carries the new SHA-256.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01JadgGo4G2GHaAMNb3qyygk
---------
Co-authored-by: Claude <noreply@anthropic.com>
Co-authored-by: Brandon Thomas <echelon@gmail.com>
* M9: visible signatures read upright on rotated pages
A visible digital signature placed on a page with /Rotate was drawn in
user space, so its graphic and details turned with the page: on scans
stored landscape with /Rotate 270 the signature came out sideways.
Stamps (#1398) and Fill & Sign marks (#2392) were already corrected;
signatures were not.
A new signature widget on a turned page gets /MK /R equal to the page
rotation (inherited rotation included, via pdfcraft_model::pages), and
its appearance is laid out in the box as displayed (sides swapped for a
quarter turn) with a /Matrix from pdfcraft_model::view_matrix_for that
maps it exactly onto /Rect. Signing an existing field follows that
field's own /MK /R, so a field without one is drawn as before. Pages
that are not turned produce the same bytes as before.
Tests: sign crate (layout equals the upright box's, /MK /R, /Matrix,
inherited /Rotate, existing fields with and without /MK /R, malformed
/MK /R) and an engine render test on 0/90/180/270 pages with the
quadrant image. Both fail with the fix reverted.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Keep one evidence/notes pair in the sign.digital parity entry
---------
Co-authored-by: vjeko2404 <vjekoslav@outlook.com>
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
Co-authored-by: Brandon Thomas <echelon@gmail.com>
* Save As and exports open in the document's own folder
Save As, saving a document that needs a location, the Office and
comment/form data exports, Optimize and Sign now start the file dialog in
the folder of the open PDF instead of the system's default. A new
document and an email attachment's temporary copy keep the old behaviour.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Match the full Outlook temporary-copy layout before skipping the document folder
Anchor is_mail_temp_copy to the cache layout (one random folder, then the file) and
to the Packages\Microsoft.OutlookForWindows_<id> folder, so ordinary paths that merely
contain those names keep the document's own folder. Regression cases added.
Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
The desktop app's argument loop took `--help` as a view setting named
`help` (consuming the next argument as its value) and `-h` as a file to
open, so both started the window and a scripted call never returned.
`-h` and `--help` now print a short usage, which points scripts to
pdfcraft-cli, and exit 0 before any window or log file is created.
`--version` and `--help` write through a plain `writeln!` instead of
`println!`, which panicked (exit 101) when standard output was full or
closed, e.g. `pdfcraft --version > /dev/full`.
Release builds on Windows are GUI-subsystem programs, so, as with
`--version` already, the text shows when the output is redirected or
piped but not in a plain console window.
Fixes#4076
* M2: text extraction finishes a column before the next one across a paragraph gap (#3658)
The block order took the top-most unread block next, so after the first
paragraph of a left column it jumped to the top of the right column and
read the rest of the left column last. Now the nearest block below the
one just read, overlapping it horizontally and at most 2.5 heights of
its last line below it, comes next, unless an unread block sits above it
in its own span (a column above a full-width heading or footnote),
beside it on its left, or shares its first line (the first lines overlap
by at least 30% of the taller one: a table or form row, which still
reads across, also with labels and values in different sizes or on
shifted baselines; a line that only touches it or a small footnote
marker is not a row). Footers, footnotes and captions further away keep
their old place. Extraction, Find and copy share this order.
Known limit: when a paragraph in the next column starts on the same line
as the continuation (text on a baseline grid), it counts as a row and
the top-most rule applies, so the order of #3658 comes back there.
Telling prose from a row in that case needs more evidence.
Fixes#3658
* M14: update ctutils to 0.4.5 for RUSTSEC-2026-0385
The dependency-advisory gate rejects ctutils 0.4.2 (non-constant-time
mask generation and u128 comparisons, fixed in 0.4.4). It comes in
through crypto-bigint for the signing crates. Only its version and
checksum change in Cargo.lock.
(cherry picked from commit 1f8811761a)
* M4: the Bookmarks panel shows each bookmark's colour and style (#3193)
ISO 32000-2 §12.3.3: an outline item's /C is "An array of three numbers
in the range 0.0 to 1.0, representing the components in the DeviceRGB
colour space of the colour that shall be used for the outline entry's
text" (Table 151), and its /F flags say italic (bit 1) and bold (bit 2)
(Table 152). Both were ignored: every title was drawn in the theme's
text colour and face.
The inspector (OutlineItem) and the bookmark list (organize::Bookmark,
used once a document is edited) now read them: each component is kept
within 0-1, and black (the default) or a /C that isn't three numbers
reads as no colour. The panel draws bold titles in the semibold face,
italic ones slanted, and the colour as given, lightened towards the text
colour only as far as it needs to read on the panel (3:1), so dark blue
stays visible in the dark theme. bookmark_list reports color, bold and
italic where they differ from the defaults.
Mutants, each failing a test: italic or bold bit ignored (both readers,
the panel), black kept as a colour, no clamping, a four-number /C
accepted, colour ignored or truncated in the panel, the contrast floor
removed, always jumping to the text colour. Checks for non-finite
numbers were equivalent (clamping already covers any size), so they
are gone.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* M4: set a bookmark's style and colour from its menu or bookmark_set_style (#3193)
#3193 asks for a way to mark bookmarks by colour, for example chapters
that are rarely used. ISO 32000-2 §12.3.3 gives every outline item a
title colour (/C, Table 151, DeviceRGB, default black) and style flags
(/F, Table 152: bit 1 italic, bit 2 bold, default 0); the previous
commit shows them, and this one lets the user change them.
- organize: set_bookmark_color writes /C, removing it for black (the
default) and refusing a component outside 0-1; set_bookmark_style
sets or clears the bold and italic bits, keeps any bit the table
doesn't define, and removes /F when no bit is left.
- engine: SetBookmarkColor and SetBookmarkStyle edits, undoable, under
the same assemble permission as the other bookmark edits. Their undo
labels are the menus' own names, already translated in every
catalogue.
- ui-egui: the bookmark menu gains Style (Bold and Italic check boxes)
and Colour (the comment swatch grid, with Other colour...). Only
existing UI strings are used.
- automation: bookmark_set_style takes any of color ([r, g, b], 0-1),
bold and italic, and changes only what it is given.
Mutants, each failing a test: no range check (library and tool), black
kept as /C, a bit not set, a bit not cleared, an untouched bit cleared,
/F 0 written, the bits swapped (library and menu), the tool accepting
nothing to change or ignoring bold/italic, the menu's colour ignored.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* M4: a colour and a style set in one bookmark_set_style call are one undo step (#3193)
Review on #4171 (CodeRabbit). Given both, the tool applied two edits,
so undo took back only the style and left the colour, and a failing
second edit left the first applied. They now go in one Edit::Batch
named "Style", all or nothing. "Colour" and "Style" join EDIT_LABELS,
and "Style" BATCH_LABELS, so the history can translate them.
The test sets colour and style together and undoes once; with the two
edits applied separately it fails.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* M12: set a table's Summary and a header cell's Scope (#4103, #4104)
accessibility_set_tag_property takes `summary` (Table tags) and `scope`
(TH tags: Row, Column or Both). Both are Table attributes, written into
the tag's attribute object with /O /Table in /A: an existing one is
edited in place, keeping other attribute objects and their revision
numbers; one reached by reference is copied into the tag's own /A first,
so tags sharing it keep their value; a new one is added when there is
none. Clearing drops the key, an attribute object left with only /O,
and an empty /A. The tag type is checked after the role map.
accessibility_tags lists both. Setting a summary clears the
table-summary finding.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* M12: edit the Table attribute object that holds the value (#4103, #4104)
With more than one /O /Table attribute object in a tag's /A, setting a
summary or scope edited the first one even when a later one held the
key, and clearing left that later value in place (both still read back
as the old value). Setting now edits the object holding the key (else
the first Table object, else a new one), and clearing removes the key
from every Table object holding it.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* M6: calculations read their notation only from a comment, and a regex after a condition as a regex
Two findings from CodeRabbit's review of #3550, both reproduced first:
- parse_calculate and calculation_sites found BVCALC and EVCALC anywhere
in the script, so `var s = "BVCALC a EVCALC";` read as the notation `a`:
renaming `a` rewrote the string, and the form calculated `a` instead of
running the script. The lexer now keeps the text of each comment, and
the notation is read from the first comment that holds BVCALC and the
EVCALC after it (notation_range), by both the Calculate tab and a
rename. A line comment counts, and a comment that never ends runs to
the end of the script, as before.
- A `/` after any `)` divided, so after the condition of `if`, `while`,
`for` or `with` a regular expression was read as code: renaming `a`
rewrote `if (flag) /getField("a")/.test(x)`, and in
`if (flag) /"/.test(x)` the quote started a string that hid the
script's real getField calls. The lexer now notes which `(` opened
such a condition (not a method of that name, `o.if(x)`), and a `/`
after its `)` starts a regular expression.
af::tests::notation_is_read_only_from_a_comment,
af::tests::a_regex_after_a_condition_is_not_read_as_code and
tests::a_script_that_spells_the_markers_in_a_string_runs_as_a_script
fail without the fix. Parity, ROADMAP.md and docs/roadmap.md updated.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01BfMGHQNgdq5yf5tKZHGR3z
* M6: form.props-calculate notes that a regex right after a brace is still read as code
From CodeRabbit's review of this PR. The lexer still divides after `}`,
which ends a block as often as an object literal, so in
`if (x) { } /"/.test(s); event.value = getField("a").value;` the quote
starts a string and the getField is hidden from a rename and from the
calculation order. Checked with a scratch test before writing it down.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01BfMGHQNgdq5yf5tKZHGR3z
* M6: a line comment ends at any line terminator, so code after `\r` is still read
From CodeRabbit's review of this PR. A `//` comment ran to the next `\n`,
so with `\r` line endings it hid the rest of the script: a rename missed
the getField calls after it (since #3550), and a string after it that
spells BVCALC ... EVCALC read as the notation. A `/` taken for the start
of a regular expression likewise looked past `\r` for its end, and could
swallow the next line's code.
Both now stop at any of JavaScript's line terminators (`\n`, `\r`,
U+2028, U+2029; line_ends_at), and U+2028 and U+2029 between tokens are
skipped rather than read as the start of a word.
af::tests::a_line_comment_ends_at_any_line_terminator fails without each
of the three changes: with `\r`, the string read as notation `a`; with
the comment fixed but not the regex scan, `i++ / 2;\r` swallowed the
getField after it; without skipping U+2028, the getField after it was
not a call.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01BfMGHQNgdq5yf5tKZHGR3z
* M6: a word, number or regex's flags end at U+2028 and U+2029
From CodeRabbit's review of this PR. The scans for an identifier, a
number and a regular expression's flags took every byte past ASCII as
part of a word, U+2028 and U+2029 included, so in `x\u{2028}getField("a")`
the getField was part of one word and not a call: a rename missed it, and
the calculation order didn't read it.
`word` now takes a position and is false where line_ends_at is true, so
the three scans share one rule. The arm that skips U+2028 and U+2029
between tokens stays: without it, the punctuation arm would step one byte
into the character.
af::tests::a_token_ends_at_a_line_separator fails without the fix, for a
word, a number and a regex's flags alike; it and
a_line_comment_ends_at_any_line_terminator fail without the skipping arm.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01BfMGHQNgdq5yf5tKZHGR3z
* M6: the `while` that ends a `do` loop counts as a condition, said and tested
A `/` after the `)` of a do-while starts the next statement, so it starts a
regular expression there too. The comment on BEFORE_CONDITION says so, and
a_regex_after_a_condition_is_not_read_as_code covers it (from review).
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01BfMGHQNgdq5yf5tKZHGR3z
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* fix(ui): keep colour popups open when "+" opens the custom colour picker
The colour popups used egui's default menu close behaviour (CloseOnClick),
which closes on any click, including the "+" swatch inside the popup. The
picker's open state was remembered, so it appeared only on the next open.
Close these popups only on clicks outside them: the quick bar's colour and
fill popups, the comment context menu's Colour submenu and Format text's
colour popup. Picking a swatch or pressing Apply still closes them.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* contributors: credit agent-reed by GitHub profile name
* test(ui): pin the fill popup and context-menu Colour submenu keeping their picker open
The quick bar's Fill colour popup and the comment context menu's Colour
submenu each get a kittest test: "+" shows the picker without closing the
popup, and choosing a colour still closes it. Both fail with the fix reverted.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* M3: a Launch link that names a PDF opens it in PdfCraft (#4168)
Documents that cross-reference each other often use Launch actions to
open another PDF next to them (#4168: 268 links such as
..\se\se_ST.pdf). PdfCraft follows no Launch action, so clicking them
did nothing, while the same link written as a GoToR opens.
ISO 32000-2 §12.6.4.6: a Launch action "launches an application or
opens or prints a document". Starting programs is not something a
document should be able to do, but opening a PDF is what a remote
Go-To already does. So a Launch action whose /F names a .pdf file, and
that has no /Win launch parameters (application, operation,
arguments), is read as the remote Go-To to that file's first page
(LinkTarget::RemoteGoTo with launch: true). It then goes through the
same path as one: PDF only, --root confinement, confirmation for
absolute paths, opened as a document and never handed to the OS.
Windows writers separate such paths with \, where §7.11.2.1 uses /, so
a path without any / has its \ read as /. doc_info's link target says
"action": "Launch" or "GoToR".
Tests: launch_actions_that_name_a_pdf_open_it_like_a_remote_link
(relative with \, a file specification, an executable, /Win, a bare
.pdf, a mixed path, a URL file system) and
a_launch_link_to_a_pdf_opens_it_like_a_remote_link (link_open opens
the PDF in the root; a program link opens nothing). Mutants, each
failing: the /Win check dropped, \ always or never read as /, any
extension, a bare ".pdf", case-sensitive ".pdf", Launch not read.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* M3: a Launch link with a stray /D still opens its PDF (#4168)
Launch (ISO 32000-2 Table 207) has no /D, but launch_pdf went through
remote_go_to, which rejects the action when /D isn't a valid GoToR
destination. A Launch naming c.pdf with /D 0 stayed Other(Launch).
The /F parsing is now shared (action_file) and Launch ignores /D.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_0175FWj4xFhMhSH3UpMU8DSC
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
A note's /Name picks its icon, and ISO 32000-2 §12.5.6.4, Table 175 asks
every viewer to provide icons for seven standard names: Comment, Key,
Note, Help, NewParagraph, Paragraph, Insert ("Additional names may be
supported as well"). PdfCraft drew two shapes: Comment, and a page for
everything else. So choosing Key, Help, Insert, NewParagraph or
Paragraph in Properties changed nothing visible, and notes in received
files that use these names, or further ones such as Check or Star, all
looked like the same page. Recolouring such a note redrew it as a page.
note_icon now draws a shape of its own for each standard name and for
seven further names in common use (Check, Circle, Cross, CrossHairs,
Star, RightArrow, UpArrow). They are simple geometric drawings written
for PdfCraft, filled in the note's colour with a dark outline like the
existing two. NoteIcon gains the further names (NoteIcon::ALL); the
Properties chooser and comment_add offer all fourteen. Another name
still draws as Note, the table's default.
Tests: every_note_icon_draws_its_own_shape (all fourteen differ; an
unknown name and a missing one draw Note) and
a_star_note_keeps_its_star_when_recoloured. Mutants, each failing them:
from_name limited to the standard seven, Star or Key drawn as Note, an
unknown name drawn as Comment. One survivor reshaped Circle while
keeping it distinct, which the distinctness test rightly allows.
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* M5: stamp_custom places a picture fitted inside a rect
stamp_custom only centred a PDF page or image at its natural size, at
most 200 pt, so a vector diagram could not be placed at a text column's
width. It now takes rect [x0, y0, x1, y1] (displayed-page points, like
at) as an alternative to at: the picture is scaled to fit inside the
box, keeping its shape, and centred in it. A PDF page stays a form
XObject, so it remains vector.
- Engine: Edit::AddCustomStamp fits the picture inside a non-point rect
instead of stretching it (fit_picture). A box already of the
picture's shape is kept exactly, so signatures and other callers that
size the box themselves are unchanged. The displayed sides are
swapped on quarter-turned pages, as for the natural size.
- Automation: rect is validated (four finite numbers, each side
at least 1 pt and at most 14400 pt, the largest PDF page; not clipped
to the page, like at); passing both at and rect,
or neither, is refused. path still goes through the read root.
- Tool schema and description, parity note and evidence.
Fixes#4077
* M14: update ctutils to 0.4.5 for RUSTSEC-2026-0385
The dependency-advisory gate rejects ctutils 0.4.2 (non-constant-time
mask generation and u128 comparisons, fixed in 0.4.4). It comes in
through crypto-bigint for the signing crates. Only its version and
checksum change in Cargo.lock.
(cherry picked from commit 8a687ee2c6012e3d18399633d2fb9fb3742f02ae)
Save as PDF/A removes the encryption (PDF/A forbids it), but it was gated
only by the modify permission, so a document opened with the user password
whose owner withheld printing or copying could be saved unencrypted with
every restriction gone. It now needs the same rights as Protect and Remove
security, also inside a batch.
Fixes#3921
* M6: flattening removes empty fields it cannot draw (#4017)
Flattening kept every widget without an appearance so that its value
was not lost with nothing drawn in its place (#1794). A field without a
value has nothing to lose, yet it stayed in /AcroForm /Fields and on the
page, so a flattened file could still be filled in.
A widget without an appearance now stays only when its field has a
value: its /V, or the nearest one inherited through /Parent. A missing
value, an empty string or an empty array is no value. Comments and
valued widgets are unchanged.
Fixes#4017
* M6: flattening keeps a widget whose value is past the parent limit (#4017)
has_value walks at most 64 levels up /Parent. When it ran out it said
"no value", so a widget whose /V sat on the 64th ancestor was removed.
Running out now counts as a value: one that wasn't checked must not be
removed.
* M10: odd and even pages are page numbers, as Acrobat counts them (#3984)
Even pages only with the range 4–11 printed pages 5, 7, 9 and 11: `narrow` took odd and
even places in the chosen pages, and its comment said Acrobat does the same. Acrobat
counts page numbers: "if you set the range to 2, 7–10 and choose Even Pages Only, only
pages 2, 8, and 10 print" (Adobe Acrobat DC Help, last updated 11/28/2019, Options in the
Print dialog box, p. 515; the same example in Using Adobe Acrobat 9 Pro, p. 413). Odd and
even now keep the pages whose number is odd or even, for a typed range, picked thumbnails
and the current page alike, in the order given, and Reverse turns that round. The header,
footer and watermark ranges (marks_ui) and Extract's odd/even filter in #3729 already
count page numbers.
The new test pins Acrobat's example and the report's ranges. select_listed's tests and
cut_stack_printing_through_tools counted places; the latter now asks for even pages of
2–10, which by page number are the 2, 4, 6, 8 and 10 it printed before, so its expected
output is unchanged and would fail with places (3, 5, 7, 9).
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* M10: say that odd and even are page numbers in doc_print, and what page labels still lack (#3984)
Review on #4034: the doc_print description says odd/even count page numbers, and the parity note says a document with page labels still counts page numbers there, which the Acrobat help consulted doesn't settle.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* M10: cite the cut-stack print test at its path under tests/it (#3984)
main moved the automation integration tests into tests/it, so the
evidence path added for odd/even printing no longer existed and
`cargo xtask parity` failed after the rebase.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_0175FWj4xFhMhSH3UpMU8DSC
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
Parallel PRs had each copied their crate's row and appended their patch as
the next number, leaving two hayro rows, four hayro-syntax rows and three
lopdf rows that disagreed with one another.
- hayro: the rows were identical except item (10), the native-gradient
backport in one and the `/Interpolate` pre-resize (#624) in the other.
The `/Interpolate` row is kept and the gradient backport is appended as
(23). The row already skipped (21); that gap is left as it was.
- hayro-syntax: the 24-item row is kept (it alone has the delimiter
extension of (4)); item (7) takes the wording that names ASCII85 (its
`decode_limit` patch is in filter/ascii_85.rs); the direct-object nesting
cap, numbered (14) in its own row, is appended as (25).
- lopdf: the six-item row is kept; the others were its prefix.
A blank line after the hayro-interpret row also ended the table, so the
crates after it rendered as loose text; it is removed. All 368 patch and
test entries in the old rows are still present, and each moved patch has
its `PdfCraft patch:` marker in vendor/.
Claude-Session: https://claude.ai/code/session_012rLxgUTc4atMXXgQEuJxh8
Co-authored-by: Claude <noreply@anthropic.com>
Review follow-up on #3985: JsOutput deduplicated document-script errors by
their text (document script N: ...), so a field script that threw the
same words was dropped by append, and a document script's error was
dropped by absorb when a field script had already reported that text.
JsOutput now records which errors came from document scripts
(doc_errors) and deduplicates only those; pdfcraft_js::is_doc_error,
which guessed from the wording, is removed.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_0175FWj4xFhMhSH3UpMU8DSC
Review on #3985 (benandez): JsOutput::absorb reported a failing document script once, but append
added every error again, so merging two outputs repeated it. pdfcraft_js now says whether an
error is a document script's (is_doc_error, next to the doc_error format), and append skips one
already reported; each field script error is still its own.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
CodeRabbit on #3985: a document script over the size or nesting limit made `run`
return before any script ran, so the field script failed as before. It is now
skipped (never evaluated, as the limits require), reported in its place in
doc_errors, and the other scripts and the field script still run. The field
script's own limits still refuse it outright.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
rewrite_block clamps a requested paragraph width between the text's
size in user space (size * k) and the largest page PDF allows
(14 400 pt). f64::clamp panics when its minimum is the larger, so text
set above 14 400 pt crashed the app as soon as its paragraph was given
a width. The size comes from the file (`20000 Tf`, or `1 Tf` scaled up
by `Tm`) or from the request (the automation tools pass `size`
through).
The lower bound is now capped at 14 400 pt too, so such a paragraph
gets the widest width allowed. `f64::min` also turns a NaN size into
the cap.
Test: a 20000 pt Tf, a 1 pt Tf scaled 20000x by Tm, and a requested
size of 20000 pt each take a width of 200 without panicking (all three
panicked before).
Reported-by: BS.ehlas.cz
Co-authored-by: Brandon Thomas <echelon@gmail.com>
Found while testing crates/xfdf/src/lib.rs:236-243 (parse_hex)
Co-authored-by: Claude Haiku 5.5 <noreply@anthropic.com>
Co-authored-by: Brandon Thomas <echelon@gmail.com>
* FreeBSD package.sh: package the aarch64 cross build
The release workflow now cross-compiles FreeBSD aarch64 inside the x86_64 VM
(storytold/craft-common-actions#50) and sets CARGO_BUILD_TARGET=aarch64-unknown-freebsd.
package.sh now reads the binaries from target/<triple>/release when CARGO_BUILD_TARGET
is set, names the archive after the target instead of uname -m, and skips the --version
run when the binary is for another architecture than the machine. x86_64 packages are
unchanged.
The OCR models come from cargo xtask, which has to run on the build machine, so it is
built for the host with CARGO_BUILD_TARGET unset.
Part of storytold/craft-common-actions#39.
* FreeBSD package.sh: accept only FreeBSD targets, check cross-built binaries
Review follow-up. CARGO_BUILD_TARGET must now be a *-unknown-freebsd triple, so a Linux or macOS
target can no longer be packaged under a FreeBSD name, and it is read before uname -m, so an
unsupported host does not block a valid cross build. When the binaries are for another
architecture and cannot run --version, file(1) must report each as a FreeBSD ELF executable
for the target architecture.
Part of storytold/craft-common-actions#39.
* FreeBSD package.sh: accept only executables in the cross-build check
Review follow-up. The file(1) check for binaries that cannot run here now needs an executable
(file says "executable" or "pie executable") or an ELF with an interpreter, which is how an older
file(1) still shows a PIE it calls a shared object. FreeBSD libraries, object files and core files
for the target architecture are refused.
Part of storytold/craft-common-actions#39.
* FreeBSD package.sh: never run a FreeBSD target's binary on another OS
Review follow-up. With CARGO_BUILD_TARGET set on a host that is not FreeBSD (say an x86_64 Mac
building x86_64-unknown-freebsd), the architectures match but the binary still cannot run, so
the --version run is skipped there and the file(1) check is used instead.
Part of storytold/craft-common-actions#39.
* FreeBSD package.sh: accept only the two supported FreeBSD targets
Review follow-up. CARGO_BUILD_TARGET must be aarch64-unknown-freebsd or x86_64-unknown-freebsd,
the two the release builds; anything else, including made-up triples such as
aarch64-foo-unknown-freebsd, stops with exit 2.
Part of storytold/craft-common-actions#39.
RiceDee
PhilipandClaude Sonnet 5.5
Marco Arnulfo
Osvaldo Duran MelendezandClaude Opus 5.5
alehelandClaude Opus 5.5
nlevaandOpus 5.5 medium ultracode
Eric Kaden
aalbertiarchitecteandClaude Sonnet 5.5
Ridwan
Jayesh Prajapati
Ahmad Mu
mtlcl410andClaude Opus 5.5
pat26-dotcomandClaude Opus 5.5
PiohrunandClaude Opus 5.5
Andrew GentryandClaude Opus 5.5
Piyush Goel
Dylan M. Taylor
Matej VrzalaandBrandon Thomas
Zuujis