* M11: JBIG2 images share a symbol dictionary, up to 16 at a time
With Monochrome Images set to JBIG2, Optimize stored each image's
letters in a symbol dictionary of its own, so a document of N pages
carried its font's shapes N times. Now up to 16 images the run stores
as JBIG2 share one dictionary in a /JBIG2Globals stream, holding the
marks found in more than one of them; each image's text regions refer
to it first, then to a dictionary of its own for the marks only it
repeats. An image is stored that way when it comes out smaller, and a
group only when what its images save is more than the globals take.
- filters: encode_jbig2_shared codes a group: the globals are a symbol
dictionary segment numbered 0 and associated with no page (7.2.6);
each page numbers its segments from 1, as a segment refers only to
lower numbers (7.2.5), and the shared symbols' IDs come first, as the
dictionaries are referred to in that order (Table 31, SBSYMS). At
most 16,383 shared marks, those in the most images, so a page keeps
room for its own under the decoder's 32,767.
- optimize: the run holds the 1-bit samples of the images it stores as
JBIG2 (16 at most, 64 MiB at most) and stores them again sharing,
weighing each with the longest reference the globals could have.
Eight pages of 10 pt text rendered at 300 dpi take 41% less in
Helvetica and 42% in Times than coded alone, 10% in Courier, and 46%
in Helvetica at 600 dpi; groups of 2, 4, 16 and 32 save 19%, 33%, 45%
and 47%. Redacting one image stores the others of its group again
without the dictionary, so 16 keeps that to 15 images.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01AmsdeUCdTaD72jkDw2pJKY
* M11: test what the mutants found untested in shared JBIG2 dictionaries
- filters: the group goes through encode_jbig2_shared, which refuses it
for an image the encoder refuses; two marks in common are enough to
share; past the 65,536 distinct marks a group holds, a mark first seen
later isn't shared while those held count every image.
- optimize: optimizing again keeps both the shared pages and the pages
coded alone as they are; under Retain, averaged JBIG2 pages share
nothing; a last group of two shares.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01AmsdeUCdTaD72jkDw2pJKY
* M11: only images redaction can store again share a JBIG2 dictionary
Redacting one image of a group stores the others again without the
dictionary, which can hold the shapes of marks under the area, and
refuses the redaction for one it can't: it takes image masks and
images of one component as its own reading counts them (no DeviceN,
the family named directly), and at most 64 Mi pixels. Optimize took
DeviceN of one colourant and up to 80 million pixels, so such an image
in a group made any redaction of the others fail, where before it was
coded alone and the same redaction worked (the Consumers review).
Only an image mask or a DeviceGray image named directly, of at most
2^26 pixels, now joins a group; others are coded alone. An engine test
optimizes three pages, two DeviceGray and one DeviceN, and redacts the
first: the DeviceN page stays alone, the second is stored again, and
no image names the dictionary after a save.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01AmsdeUCdTaD72jkDw2pJKY
* M11: optimize and redaction share one limit on the images redaction stores again
The second Consumers review: Optimize's limit on images that share a
JBIG2 dictionary copied redaction's private 64 Mi, with nothing tying
the two, so a lower one in redaction would bring back refused
redactions with no test going red. Both now read
pdfcraft_cos::MAX_REDACTED_IMAGE_PIXELS. The engine test adds an image
mask, the other kind that shares, so a redaction that stopped storing
either kind again fails it. doc_optimize's description, the README,
the parity note and ROADMAP say which images share (named directly).
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01AmsdeUCdTaD72jkDw2pJKY
* M11: a JBIG2 group is coded before its samples would pass the limit
CodeRabbit on #5910: hold added an image to the group and then checked
SHARED_BYTES, so a group could pass the 64 MiB it is documented to stay
within by its last image, which can itself be up to 64 MiB (an image
that shares has at most 2^26 pixels, and as its rows are whole bytes,
at most that many bytes; a 1-pixel-wide one takes them all). hold_in
codes the group first when an image would take it past the limit, and
after when it has 16 images; with room for 10 bytes, images of 4 go two
to a group, where the old order made one of 12. CodeRabbit's follow-up
too: the 18-image test decodes every image and compares it with its
samples, across the boundary between the groups.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01AmsdeUCdTaD72jkDw2pJKY
* optimize: count the globals' object framing; filters: test the shared coder's size limit
- A JBIG2 group shares a dictionary only when it saves more than the
globals' dictionary and data plus NEW_OBJECT (96 bytes: the object's
framing, its xref entry, and an encrypted file's IV and padding), so a
group that saves less than that no longer makes the file larger.
- encode_jbig2_shared is Unsupported for an image taller than the
decoder takes and codes one at the bound.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* filters: drop the unused rows binding in encode_shared
page() no longer takes the rows since #5511.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* filters: the shared coder's at-bound test says what it returns
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
Co-authored-by: FredApps <153173854+FredApps@users.noreply.github.com>
* M5: keep Fill & Sign editing on Enter and preserve line breaks (#5850)
* M5: preserve typewriter whitespace through readers and edits (#5850)
* M5: retain direct-subtype comment listing for Fill & Sign fix (#5850)
* fix(ui): do not open right-click context menu on image in crop mode (#5835)
* M7: preserve active crop context routing (#5835)
Prioritize active crops over overlapping images and share measured action-pill geometry with painting. Cover overlapping images, handle margins, page edges, and all view rotations with regression tests.
* fix(ui): test selected cropped image by quad in right-click loop (#5835)
* fix(ui): trim crop right-click routing to the crop box and handles (#5835)
The Done/Cancel/Remove Crop pills are widgets and already take their own
right-clicks, and the canvas context-menu guard already closes the image
menu, so drop the pill hit-test, the crop_pills layout extraction and the
extra secondary-click block. Move the session note to the Progress log.
---------
Co-authored-by: FredApps <FredApps@users.noreply.github.com>
Co-authored-by: FredApps <153173854+FredApps@users.noreply.github.com>
* M10: macOS print jobs name their title and owner (#5743)
lp sends no com.apple.print.JobInfo.* attributes, and Kyocera's macOS
filter crashes without PMJobName and PMJobOwner, so the job stops with
cups-filter-crashed and nothing prints. Both go to lp as job options, in
the form lp_args passes on: printable ASCII, up to 64 bytes.
* M10: keep macOS job metadata as the name CUPS should send (#5743)
Review of #5757, checked against this Mac's libcups in memory:
- `'` and `\` were consumed as quoting and `{` opened a collection, and a
bare true/false became a boolean, so a filter reading PMJobName got
nothing or the wrong type. They now become `_`, or the fallback.
- CUPS keeps the last of a repeated option, ignoring case, so the
defaults replaced a value a doc_print caller had set. They are now
added only for a key the job leaves out.
- Nothing proved the job info reached the spooler. A test now runs both
submit paths against a stand-in `lp` on PATH.
* M7: make page-mark replacement transactional (#5657)
* ROADMAP: drop the header line (the log entry stays)
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Brandon Thomas <echelon@gmail.com>
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
- Add Freehand-Highlight tool with 100pt line width support, Lucide highlighter icon, and PDF Multiply blending.
- Add customizable floating and docked hotbar with command picker, size slider, full-side strip chrome integration, and settings gear icon anchored at the bar end.
- Add left/right docking options for the navigation rail with toggle button and preferences setting.
Record image crop and stream ownership, visible orientation, clipboard and formatting fixes, Home controls, and reloadable font discovery as PR candidates. Estimates remain unchanged.
Co-Authored-By: Codex GPT-6.1 <noreply@openai.com>
Describe editor-owned crop removal, preserve authored clipping paths, and link the scope/state regressions in parity evidence. Record the maintainer changes without changing readiness estimates.
Co-Authored-By: Codex GPT-6.1 <noreply@openai.com>
Includes #4325#1952#4180#2529#4320#4805, preserving their original histories.
Keep paragraph alignment and hard/soft wrap metadata together; retain CCITT/downsampling/RGB ownership guards with bounded JBIG2 export and exact-copy symbol encoding.
Combined interaction regressions added. Validation pending.
Preserve main's continuous text selection, page tools and module split. Carry only this branch's sidebar-focus feature and regression onto main, without resurrecting old common files from criss-cross merge bases. Hosted CI remains required.
Review found behaviour the tests let break unnoticed (each was a
surviving mutant, and each new test fails on it):
- black padding bits: a run reaching past the row would stop symbol
coding on many scans;
- Annex A's 32-bit range and PREV at exactly 256, where a decision would
go uncoded: coordinates past 4,435 on a 12,000-pixel-wide and a
10,050-row page, and the contexts of 4436's coding;
- marks joined at a corner are one mark; 256 pixels a side is a symbol,
257 is left to the generic region;
- the run and row caps, at and past them.
The roadmap's status line for this change now comes first, and the
"about a third smaller than Group 4 on scans" figure is replaced by what
was measured: 27-33% on the same pages with scan-like noise added.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01P6yUtvWGPsJpMLyh6pxSXG
pdfcraft_filters::encode_jbig2 stores each distinct mark of a 1-bit
image (8-connected black pixels, at most 256 a side) once, as a symbol
in a symbol dictionary, and places its exact copies with an immediate
lossless text region that refers to it. Larger marks, and in a second
plan marks that occur once, go to a generic region over their box. It
keeps whichever of that and the generic coding (encode_jbig2_generic,
unchanged) is smaller. Only exact copies share a symbol, so the stream
decodes to the same bits.
Written from the JBIG committee's ISO/IEC 14492 Final Committee Draft:
6.4 and 6.5 (text region and symbol dictionary decoding), 7.2, 7.4.2
and 7.4.3 (segment headers and syntax) and Annex A (the integer coders,
checked against its worked example and Table A.1).
On six pages of rendered 300 dpi text the output is 28% of the generic
coding's size and 17% of Group 4's, at about 100 ms a page; hayro-jbig2
and Poppler (pdfimages) both decode it to the original bits. Scans,
whose copies of a letter are seldom identical, gain little: that needs
refinement coding. A dictionary shared between pages (/JBIG2Globals)
is a further step.
The optimizer's Monochrome Images > JBIG2 (lossless) and doc_optimize
mono jbig2 use it.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01P6yUtvWGPsJpMLyh6pxSXG
The row gets a red step and a "Missing field" caption, as a loop does; a
red card names the formulas and links to the first, in place of the
all-clear; a script that builds names gets a grey "Unchecked reads"
caption and a note; the summary above the page lists a missing field
among the reads and says so, and says when a script names fields as it
runs. The name and formula lines of a row are sized by their own
right-hand text, so a wide caption no longer cuts the name.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01BfMGHQNgdq5yf5tKZHGR3z
calculation_order flags MissingField (a field deleted from under a sum, a
typo in notation, a script's getField; a group's name and a widget's
number count as there) and BuiltNames (a getField or AFSimple_Calculate
list built at run time, found as af::Site::Built in the same pass as the
literal names). form_calculation_order gives each field's formula and the
two new issues; form_fields shows a custom Calculate script; the
Calculation order page explains both in its row tooltips.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01BfMGHQNgdq5yf5tKZHGR3z
docs/architecture.md said every image codec decodes through the
bootstrap renderer; Export ▸ Images decodes CCITT (hayro-ccitt) and JPEG
itself. The progress logs' "(a dithered scan)" sat after "soft mask
counted", as if it described the mask, and so did the
optimize.mono-compression note's "(a dithered scan downsampled to JPEG)".
From reviews with the pdfcraft-review skill.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01P6yUtvWGPsJpMLyh6pxSXG
decode_ccitt reads byte-aligned Group 3 whose data has end-of-line codes
but none before the first row (not as T.4 sends them) on bytes. At /K 0
with the fill ending each code on a byte, about one small picture in
five is then read as other rows; at fax width almost none are, as such
pages come out short and are refused. Export already said so. The
optimizer, when it resamples such an image or stores it again as Group 4
from behind another filter, and redaction, when it clears pixels in one,
write those rows back, and nothing said that.
Black-box, PdfCraft's renderer draws such an image exactly as
decode_ccitt reads it (all 42 misread of 200 seeded pictures, behind
ASCII85Decode too), so the written image is what PdfCraft showed before.
Refusing such data instead (a code after nearly every row but none
first) would also refuse some ordinary Modified Huffman images, whose
rows can meet 11 zeros by chance (0.5 to 5% of small ones in a
black-box probe), so the limit is stated rather than guarded: in
decode_ccitt's doc, the filters, optimize and redact READMEs, and the
core.image-filters and mono-compression notes. The optimize README's and
the mono-compression note's "not yet: Group 3 to Group 4 without
resampling" now say a lone Group 3 image: one behind another filter is
stored again as Group 4.
Also from the review: docs/roadmap.md keeps #4335's status line under
this PR's, rather than replacing it; the filters README's tests and the
core.image-filters evidence name the Group 3 layout test; the filters
crate's description names Group 3 and 4 decoding.
From reviews with the pdfcraft-review skill.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01P6yUtvWGPsJpMLyh6pxSXG
The optimize crate doc and MonoSettings named only 1-bit, CCITT and
eight-bit grey images; doc_optimize's mono said Group 4 only; the M11
milestone row stopped at Group 4 compression. They now include
downsampling (halftones aside), Group 3 to Group 4, 1-bit Flate, and
black-and-white RGB and indexed images that use only palette entries 0
and 1, packed to one bit. That last isn't "two-entry", as the roadmap and
the downsampling parity note had it: an indexed image packs whatever its
palette's size, when its samples are 0 and 1. The mono-compression note
says byte-aligned Group 3 with end-of-line codes but none before the
first row is stored again as PdfCraft draws it, which at /K 0 may be
other rows than were coded.
From reviews with the pdfcraft-review skill.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01P6yUtvWGPsJpMLyh6pxSXG
Monochrome Images only took eight-bit grey of only black and white
besides 1-bit images, so the same scan written as RGB, or as an indexed
image of two palette entries, stayed at eight bits (and RGB went to the
colour settings, as JPEG). Now these are packed to one bit first:
- eight-bit DeviceRGB whose every pixel is black or white becomes
DeviceGray; a decode array the same for each component becomes that
pair, another stops it. Calibrated RGB and RGB with a profile stay.
- an indexed image of 2, 4 or 8 bits that uses only palette entries 0
and 1 keeps its palette, whatever the two colours; a decode array
other than the default stops it.
Colour-key masks still stop all of them, and Retain leaves them to the
grey and colour settings. They are decoded through /DecodeParms given
by reference too (Document::with_direct_parms), and when downsampled a
tie goes to the dark sample of the image as packed: packed RGB is grey,
with grey's decode pair.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01BfMGHQNgdq5yf5tKZHGR3z
The PDF Optimizer and Reduce File Size downsampled colour and grey images
but not black-and-white ones. Settings::mono is now MonoSettings {
downsample, target_ppi, above_ppi, compression }, 300 ppi above 450 ppi
and CCITT Group 4 by default (Monochrome Images ▸ Downsample to;
doc_optimize mono: { downsample, ppi, above_ppi, compression }).
A 1-bit image or image mask (no filter, general-purpose filters, or CCITT
fax after any of them) and eight-bit grey of only black and white are averaged by
area: each new pixel takes the sample covering more of it, a tie 0, so a
dark line half a new pixel wide stays. They are stored as Group 4, or as
1-bit Flate when that is smaller; with Retain a resampled image keeps its
kind of compression. Images with a soft mask keep their size.
CCITT decoding moves from Export ▸ Images into pdfcraft-filters
(decode_ccitt, CcittParams, through hayro-ccitt), and
pdfcraft_cos::Document::decoded_image reads a fax image's /DecodeParms
for it (undoing filters before CCITT, such as ASCII85Decode, with any
/DecodeParms given by reference made direct first), so export
and the optimizer share one reader, and Group 4 scans can be
downsampled. A 600 ppi text page went from 79 KB to 40 KB.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01BfMGHQNgdq5yf5tKZHGR3z
- A noisy 640 × 800 soft mask under 1200 × 1500 text: resampled to the
image's new size it shrinks only a little, by less than the grey
settings' JPEG adds over the packed image, so packing wins; not
counting the new mask passed every test before.
- The hex-text half of the bomb test also stores eight-bit
black-and-white, which must pack, as its comment says.
- The optimize README, the mono-compression parity note and both
progress logs say the soft mask counts.
- The Copy Image parity note no longer lists CCITT as missing: it
copies through Export's decoder, which reads CCITT now.
From reviews with the pdfcraft-review skill.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01P6yUtvWGPsJpMLyh6pxSXG
Group 4 images (now written by Create PDF and the optimizer) would
otherwise stop exporting: they were reported as "can't be exported
yet". A CCITT fax image (its only filter) is decoded through
hayro-ccitt with its /DecodeParms (K, Columns, Rows, EndOfBlock,
EndOfLine, EncodedByteAlign, BlackIs1), masks included; /Columns has to
be the image's width, so a hostile value can't size the buffers.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01BfMGHQNgdq5yf5tKZHGR3z
JBIG2 images, and JBIG2 stencil masks, were reported as "can't be exported
yet", so an image the Optimizer stores as JBIG2 would stop exporting. They
are now decoded with hayro-jbig2 (already in the tree through hayro), with
their /JBIG2Globals from a DecodeParms dictionary or array, as JBIG2Decode
gives them: black as 0 (ISO 32000-2 §7.4.7). Unreadable globals, a JBIG2
page of another width, or fewer rows than the image skip the image; rows
past its height are dropped, so the output is bounded by the checked size.
docs/pdf-spec-parity.md §7.4 no longer says there is no JBIG2 encoding.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01BfMGHQNgdq5yf5tKZHGR3z
pdfcraft_filters::encode_jbig2_generic writes 1-bit rows as a JBIG2
stream for JBIG2Decode (embedded organisation: a page information
segment and an immediate lossless generic region, no globals): template
0 with its nominal AT pixels, typical prediction, and the MQ arithmetic
coder (mq.rs), written from the JBIG committee's ISO/IEC 14492 Final
Committee Draft. The coder reproduces its Annex H.2 test sequence byte
for byte; output round-trips through hayro-jbig2, and Poppler renders
it the same as the original.
The optimizer's Monochrome Images gets JBIG2 (lossless) beside CCITT
Group 4 (still the default), doc_optimize mono jbig2; a document below
PDF 1.4 gets /Version /1.4 in its catalog. On 300 dpi text JBIG2 is
about a third smaller than Group 4.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01BfMGHQNgdq5yf5tKZHGR3z
- Redaction doesn't decode CCITT, so a mark over part of an image the
optimizer stored as Group 4 removes the whole image (nothing leaks),
and Export ▸ Images refuses it. The optimize README and the
mono-compression parity note say so. Later PRs of this stack add both
(#4335 export, #4384 redaction).
- doc_reduce's description, Engine::reduced_bytes and docs/cli-batch.md
now list the black-and-white step; docs/target-app-parity.md's
optimize row gives the measured counts and no longer lists CCITT as
missing; the M11 milestone row lists it as done.
From reviews with the pdfcraft-review skill.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01P6yUtvWGPsJpMLyh6pxSXG
pdfcraft_filters::encode_g4 encodes packed 1-bit rows as Group 4 (ITU-T
T.6, /K -1) through the fax crate (MIT, already in the tree via tiff),
with rows capped at 32,767 samples so its 16-bit positions can't
overflow; round trips are checked against hayro-ccitt.
The optimizer (Settings::mono, CCITT G4 by default, so Reduce File Size
too) re-encodes a 1-bit image of one colour component, or an image
mask, stored with no filter or general-purpose ones, when that is
smaller as stored. The samples decode to the same bits, so colour
space, decode array and masks stay. PDF Optimizer gets a Monochrome
Images row and doc_optimize a mono option. optimize.mono-compression
goes from planned to partial (JBIG2 and monochrome downsampling not
yet).
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01BfMGHQNgdq5yf5tKZHGR3z
The wrap's space count has to survive an incremental save and a full rewrite, and a width-only text_edit has to reflow with that count. A recorded editor session narrows the box and widens it again.
A partial rewrite put the paragraph marker around the shared ET, so the neighbour in that text object joined the paragraph and the next edit deleted it.
A gap of 2.4 times the font size was still under the 2.5 times join limit, so two paragraphs became one and editing the first deleted the second. Once a paragraph has two rows, a wider gap than its own leading stays the next paragraph.
main split comments.rs into tools/comments/: annotation_deleted,
after_delete and on_page go to state.rs, their test to tests.rs. main
pulled the post-edit selection into select_after_edit, which now takes the
deleted page's annotations from before the delete. ROADMAP.md and
docs/roadmap.md keep both entries, main's newer one first.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
AdrianTM
Hasan N.
archamon
aiongg
songzhihui
ihsan mokhlisse
alehelandClaude Opus 5.5
Kyle Kassen