* Fill & Sign: a Border control for typed text, and a border colour of its own
Rebased onto main as one commit: main's Fill & Sign text colour (#2444) runs through the
same places as the border (the open box, typed(), the page input, the toolbar and the
preferences), so every step of the branch met it again. Text colour and border now travel
together as TypedLook (typed_with), which keeps typed() and the new function under Clippy's
argument limit; a border without its own colour takes the text's. Make Current Properties
Default on typed text also keeps its colour for new text now.
The branch's commits, in order:
- Typewriter text: a border change grows its box on every side, so the text keeps its place
- Fill & Sign: a Border control for typed text and dates
- Parity: the typewriter border's evidence
- i18n: the Border label in every catalog, recorded in ATTRIBUTION.toml
- Text boxes, typewriter text and callouts: a border colour of their own
- Fill & Sign: the toolbar follows the selected text; a Border colour button
- fill_sign_add and comment_edit take `border_color`
- Parity: the border colour and the toolbar following the selection
- i18n: Border colour and Same as text in every catalog, recorded in ATTRIBUTION.toml
- Typed text's border: /Border's width is read, a non-finite border colour refused, a saved Same as text restored
- Fill & Sign: the toolbar changes only the selected text; Make Current Properties Default keeps new text's border
- Review: Make Properties Default gives a text box's or callout's tool its border colour
- i18n: the new labels in the Persian catalog, recorded in ATTRIBUTION.toml
- Review: a test that dragging the Font size control resizes the selected text to where the drag ends
- Rebase: the typed text's border in main's annot and comments modules (Style's border colour, exports), and craft_ui's ComboBox
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* M5: text boxes and typed text take an oval or a circle for their border
Rebased onto #4146's new head as one commit (see there: main's Fill & Sign text colour runs
through the same places). The border shape goes into TypedLook's border with the width and
colour; a circle around typed text still takes the snug box.
The branch's commits, in order:
- Text boxes and typed text take an oval or a circle for their border
- A circle goes snug around its text
- Review: fill_sign_add takes an oval or a circle only with a border
- Review: a circle made on a quarter-turned page is sized from the text as shown
- Review: Border ▸ None takes an oval or a circle away with the line
- Review: the Border colour button shows the selected text box's own colour
- i18n: Border shape in the Persian catalog, recorded in ATTRIBUTION.toml
- Review: Border ▸ None on a circled text is one undo step
- Rebase: the border shape in main's annot, engine and comments modules; craft_ui's ComboBox; Fill & Sign's border controls in a function of their own (main's complexity limit)
- Review: Thickness 0 in Comment Properties takes an oval or a circle away, as Border ▸ None does
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Open the Font size popup first in the drag test: main moved the size into a popup
* Border shape per selected comment, and split the oval/circle border out of draw_free_text (clippy cognitive complexity)
* Re-run CI (the push of the main merge did not start it)
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
Co-authored-by: FredApps <FredApps@users.noreply.github.com>
* Fill & Sign: a Border control for typed text, and a border colour of its own
Rebased onto main as one commit: main's Fill & Sign text colour (#2444) runs through the
same places as the border (the open box, typed(), the page input, the toolbar and the
preferences), so every step of the branch met it again. Text colour and border now travel
together as TypedLook (typed_with), which keeps typed() and the new function under Clippy's
argument limit; a border without its own colour takes the text's. Make Current Properties
Default on typed text also keeps its colour for new text now.
The branch's commits, in order:
- Typewriter text: a border change grows its box on every side, so the text keeps its place
- Fill & Sign: a Border control for typed text and dates
- Parity: the typewriter border's evidence
- i18n: the Border label in every catalog, recorded in ATTRIBUTION.toml
- Text boxes, typewriter text and callouts: a border colour of their own
- Fill & Sign: the toolbar follows the selected text; a Border colour button
- fill_sign_add and comment_edit take `border_color`
- Parity: the border colour and the toolbar following the selection
- i18n: Border colour and Same as text in every catalog, recorded in ATTRIBUTION.toml
- Typed text's border: /Border's width is read, a non-finite border colour refused, a saved Same as text restored
- Fill & Sign: the toolbar changes only the selected text; Make Current Properties Default keeps new text's border
- Review: Make Properties Default gives a text box's or callout's tool its border colour
- i18n: the new labels in the Persian catalog, recorded in ATTRIBUTION.toml
- Review: a test that dragging the Font size control resizes the selected text to where the drag ends
- Rebase: the typed text's border in main's annot and comments modules (Style's border colour, exports), and craft_ui's ComboBox
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Open the Font size popup first in the drag test: main moved the size into a popup
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
Co-authored-by: FredApps <FredApps@users.noreply.github.com>
Comments copy and paste, within and between documents. ⌘C with comments selected (and no text
selected) copies them, each with its replies, as XFDF: into the app's clipboard (every tab and
window) and as text onto the system clipboard. ⌘V, Edit ▸ Paste comments or the page's context
menu pastes them onto the current page at their own positions, as new comments under names of
their own, so nothing is replaced and pasting twice gives two sets; the copies are selected.
XFDF with comments from the system clipboard pastes too, so comments travel between processes.
pdfcraft_xfdf::export_xfdf_comments writes a selection with its replies; import_comments takes
a target page and a name prefix and imports copies (the usual import still replaces same names).
Engine: Edit::PasteComments { xfdf, page } (one undo step, comment permission) and
Session::export_comments. Tools: comments_copy (read-only) and comments_paste.
Several comments select at once: ⌘-click (Ctrl on Windows and Linux) or ⇧-click adds one or
takes it out, on the page and in the Comments panel; the one clicked last has the handles.
Delete removes them all as one step, a drag moves them together, the context menu copies them.
Connected lines, polygons and clouds finish from the right-click menu's Complete (with Undo last
point and Cancel drawing), as other editors do, besides Enter and a double-click.
Co-authored-by: Claude Fable 5.1 <noreply@anthropic.com>
Co-authored-by: FredApps <FredApps@users.noreply.github.com>
* A comment's text, border or line, and fill each at an opacity of its own
Comment Properties showed one opacity for a whole comment, so a text box's
see-through background took its text and border with it, and a rectangle
marking an area on a plan couldn't have an opaque line over a faint fill.
Now a text box, typewriter text or callout has a Text, Border and Fill
opacity, a rectangle, oval, polygon or cloud a Line and Fill opacity (a part
not drawn is greyed); everything else keeps one Opacity.
The line's stays /CA, the fill's is /ca (PDF 2.0's opacity for what is
filled) and the text's /PCTextOpacity, each only where it differs from the
one it would follow, and the appearance draws them with /GS0 (strokes at the
line's, fills at the fill's) and /GS1 for the text, so every viewer shows
them. The quick bar's Opacity and StyleAnnotation's set the whole comment's.
Engine: Style::{fill_opacity, text_opacity}, Edit::PartOpacity,
annot::{set_part_opacity, appearance::part_opacity}, Props::{fill_opacity,
text_opacity}. Make Properties Default and the settings carry the parts.
Headless: comment_add / comment_edit fill_opacity, text_opacity; comment_list
reports opacity, fill_opacity, text_opacity. Four labels in every catalog
(AI-assisted translations from English, noted in ATTRIBUTION.toml).
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Review: the text's opacity slider shows what the text is drawn at; comment_list skips replies' properties; ui-parity's change record
A text box without fill and border whose text kept an opacity of its own showed the border's
in its Text opacity slider; it now shows the text's, and a change sets the whole comment's.
The opacity sliders are named by their labels. comment_list reads a comment's properties only
for comments, not for every reply.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Rebase: comment_list tells replies by is_reply, as main now threads them
main threads replies by their /IRT reference (#4061); the opacity fields skip a reply the
same way.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Review: a text-only text box made default gives the tool its text's opacity
With neither a border nor a fill, a text box's text is the whole comment:
Comment Properties shows its drawn opacity (the text's own, when set), and a
change there sets the whole comment's. Make Properties Default, and the
context menu's Make Current Properties Default, stored /CA instead, so a
text box whose text was at 50 % gave the tool 100 %. The default is now the
text's drawn opacity in that case.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Rebase: the part opacities in main's annot layout (Style's fields, the text box drawing's parts, set_part_opacity exported)
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Rebase: main's new comment test builds a Style with the part opacities
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
Co-authored-by: FredApps <FredApps@users.noreply.github.com>
Co-authored-by: FredApps <153173854+FredApps@users.noreply.github.com>
A new `model_add` automation tool and `Edit::AddModel3d` embed a U3D or
PRC file as a 3D annotation (ISO 32000-2 13.6.2) in a chosen rectangle:
- The model goes into a Flate-compressed 3D stream (13.6.3) with /Type /3D
and /Subtype U3D or PRC, read from the file's header (`U3D` and a zero
byte, or `PRC`); anything else is refused before the document changes.
Models over 256 MiB (MAX_MODEL_BYTES) are refused. model_add checks the
file's size (from the file system) and its header before reading the
rest, so a large file that is not a model is never loaded; the path goes
through the read root, and `read_model` joins the helpers the
file-access test knows take a resolved path.
- /3DD references the stream, so the annotation has its own instance.
- /3DA states /A: click (XA, the standard's default and the tool's),
page_open (PO) or page_visible (PV).
- /AP /N is the poster readers print and show before activation: a chosen
image or PDF page fitted inside the box keeping its shape and centred (the
custom-stamp picture path: `mark_source`, `fit_picture`, and the stamp's
placement matrix now shared as `appearance::picture_place`), or, with no
picture, a light frame labelled "3D model". It is drawn in user space and
not counter-rotated, so on a page with /Rotate it turns with the page, as
the model does.
- /Contents carries the name (the file stem by default) as the alternate
description (12.5.2).
- A document older than the model needs gets /Version in its catalog
(7.7.2): 1.6 for U3D, 1.7 for PRC, as the optimizer does for JBIG2.
Adobe's extension level for PRC in 1.7 is not written.
- The 3D rectangle has its own MAX_MODEL_SIDE (14400 pt).
The edit is undoable ("Add 3D model"), needs the comments permission and
rebuilds only the comments view. A new parity entry, misc.3d-add, is
partial: no poster rendered from the model, no views (/VA, /3DV), no
replacing the poster, no UI command, no /Extensions. misc.3d-view is
unchanged. ROADMAP.md progress log line.
Adapted from pdfcer (MIT, same author), commit 1ca5ece, rewritten to this
repository's types and rules.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01SqmHYx8FiWM5PcsoiErgp9
- Add Freehand-Highlight tool with 100pt line width support, Lucide highlighter icon, and PDF Multiply blending.
- Add customizable floating and docked hotbar with command picker, size slider, full-side strip chrome integration, and settings gear icon anchored at the bar end.
- Add left/right docking options for the navigation rail with toggle button and preferences setting.
A Line annotation without an appearance was drawn along /L with its
endings there, ignoring /LL, /LLE, /LLO, /Cap, /CP and /CO. With /LL,
/L gives the ends of the leader lines, not of the line itself.
- The line sits |LL| + LLO from /L, on the left of travel for a
positive /LL; leader lines run from LLO off /L to LLE past the line.
- /LE endings are drawn at the line itself.
- /Cap true draws /Contents (or the plain text of /RC) in black
Helvetica 10, turned with the line: Inline breaks the stroke around
it, Top sets it above, /CO shifts it (with a tick when moved off).
- PdfCraft measurements keep /PCMeasureValue as their caption.
- undrawable_text reports caption text the standard font can't draw.
- Non-finite, huge and negative values, and a zero-length /L, are
handled leniently; captions are cut to 256 characters.
Claude-Session: https://claude.ai/code/session_0175FWj4xFhMhSH3UpMU8DSC
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
Comments that arrive without /AP are drawn from their dictionaries by
appearance::build, which lost three entries:
- /Border [hr vr w [dash]] (Table 166): the dash array made the whole
array unreadable, so the width fell back to 1 and the border was solid.
The width is now element 2 whatever follows, and without /BS the
/Border dash array is drawn. /BS, when present, wins for both (Table
166: "the Border entry is ignored"), so a /BS without /W means 1.
- Dash arrays are drawn only when finite, non-negative, not all zero
(§8.4.3.6) and at most 64 long; anything else draws solid.
- Ink applies its /BS dash pattern (Table 168, Table 182), like the
other stroked shapes.
- A caret with /Sy /P (Table 183) shows a ¶ (Helvetica, WinAnsi 0xB6) to
its right in its colour, inside /Rect: in the room /RD leaves, or by
narrowing the caret. /Sy /None draws as before.
The Helvetica font resource, written out three times, is one helper.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_0175FWj4xFhMhSH3UpMU8DSC
An AP-less stamp whose /Name has no drawing got its placeholder frame in
the annotation's /C colour (/C [1 0 0] drew a red frame), while the doc
comment and parity note promise a neutral grey one. The frame now always
strokes PLACEHOLDER_GREY; the fourteen Table 184 names keep /C.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_0175FWj4xFhMhSH3UpMU8DSC
A rubber stamp from another program with no normal appearance was not
drawn at all. The display copy now gives it one:
- the fourteen standard names of Table 184 draw that stamp with
PdfCraft's stamp drawing (eight from the palette, six with labels of
their own), fitted to /Rect, in /C or the stamp's colour;
- no /Name draws Draft, the table's default, unless /IT says the stamp
is an image or a snapshot;
- any other name (names match byte for byte, §7.3.5) draws a thin grey
frame with both diagonals, so the stamp stays visible and selectable.
The drawing is display-only, like the other comments without an
appearance: Save writes the file as it was, and build() still declines
these stamps, so restyling and flattening never write it into the file.
A stamp with its own /AP /N is never touched. stamp() now takes the
label and the sign-here flag instead of a StampKind.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_0175FWj4xFhMhSH3UpMU8DSC
A note's /Name picks its icon, and ISO 32000-2 §12.5.6.4, Table 175 asks
every viewer to provide icons for seven standard names: Comment, Key,
Note, Help, NewParagraph, Paragraph, Insert ("Additional names may be
supported as well"). PdfCraft drew two shapes: Comment, and a page for
everything else. So choosing Key, Help, Insert, NewParagraph or
Paragraph in Properties changed nothing visible, and notes in received
files that use these names, or further ones such as Check or Star, all
looked like the same page. Recolouring such a note redrew it as a page.
note_icon now draws a shape of its own for each standard name and for
seven further names in common use (Check, Circle, Cross, CrossHairs,
Star, RightArrow, UpArrow). They are simple geometric drawings written
for PdfCraft, filled in the note's colour with a dark outline like the
existing two. NoteIcon gains the further names (NoteIcon::ALL); the
Properties chooser and comment_add offer all fourteen. Another name
still draws as Note, the table's default.
Tests: every_note_icon_draws_its_own_shape (all fourteen differ; an
unknown name and a missing one draw Note) and
a_star_note_keeps_its_star_when_recoloured. Mutants, each failing them:
from_name limited to the standard seven, Star or Key drawn as Note, an
unknown name drawn as Comment. One survivor reshaped Circle while
keeping it distinct, which the distinctness test rightly allows.
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
The cloud border clamped bumps per edge only, so a polygon with many long
edges asked for 10,000 cubic segments on each one. The bump radius now
grows so the whole outline draws at most 20,000 bumps plus one per edge.
A checkmark, cross, dot or line placed on a page with /Rotate was drawn
in the page's own axes, so on a page turned 180 degrees the checkmark
came out upside down, and on a quarter turn it lay on its side.
Marks now record the page rotation (PCStampRotate, as rubber stamps do)
and their appearance is drawn upright in the displayed box and mapped
into /Rect, sharing the stamps' code for it. The mark's box is sized in
displayed axes (FillMark::rect_at), used by both the Fill & Sign tool and
fill_sign_add, so a line runs across the page as displayed.
* M5: Fill & Sign text reads across on rotated pages
Typed text, dates and text boxes ignored the page's /Rotate, so on a
page stored sideways (common for scanned forms) the text came out
sideways. The box now follows the displayed axes, the annotation
records the turn in /PCTextRotate and its appearance is turned back
with a form /Matrix, as stamps and image signatures already do.
Callouts keep user-space axes. The headless fill_sign_add tool gets
the same layout.
generated with Claude Code
* chore: credit alexanderalber in the About window
generated with Claude Code
A stamp placed on a page with /Rotate was drawn in user space, so the
label or picture turned with the page. Counterrotate the appearance so
it reads upright as the page is displayed.
Co-authored-by: Brandon Thomas <echelon@gmail.com>
* M14: text the fonts can't draw is kept and reported, never written as ? silently
Form values and captions, text boxes, callouts, Fill & Sign text, measurement labels and stamp by-lines keep text the standard fonts can't draw, draw ? for it, mark the annotation (PCUndrawn) and report the edit (interface notice, tools' warnings); forms set /NeedAppearances (not in PDF/A). Flattening, redaction overlay text, typed and visible signatures and create-from-text refuse instead. Reports escape such characters as [U+XXXX].
* Catalogs: the two new can't-draw messages in Czech, Slovene, Kazakh, Turkish and Greek; refresh hashes
---------
Co-authored-by: Brandon Thomas <echelon@gmail.com>
* M9: visible digital signatures can show a drawn, typed or image graphic (#193)
A visible certificate signature can show a graphic where the signer's
name is large, as Acrobat's Configure Signature Appearance does: the
saved Fill & Sign signature (drawn, typed or image) or an imported
PNG/JPEG. Sign as previews it and remembers the choice; sign_document
takes `graphic` (image, text or strokes).
pdfcraft-sign gains `Graphic` and `SignOptions::graphic`. Graphics are
checked and size-capped before drawing; images keep alpha as a soft
mask and are encrypted with the rest of the update in encrypted files.
Refs #193
* Refresh catalog hashes
---------
Co-authored-by: Brandon Thomas <echelon@gmail.com>
* M5: draw all ten PDF line-ending styles
Imported lines, polylines and callouts kept Square, Circle, Diamond, Butt, Slash and reverse arrows in /LE but would not redraw them. Those styles now draw, and comment_add and Comment properties can set them.
* hu, uk: Line ending
---------
Co-authored-by: Brandon Thomas <echelon@gmail.com>
* Stamps and added images follow a JPEG's EXIF orientation (part of #434)
Phones store a portrait photo as landscape pixels plus an EXIF
Orientation tag. A JPEG went into the PDF as it was (DCTDecode), and PDF
image XObjects have no such tag, so a photo used as a custom stamp, an
added or replaced image, a watermark or background, or a button image
showed up turned 90 degrees.
Before these images are embedded, a JPEG whose Orientation is not 1 is
decoded, turned the way the tag says and re-encoded (quality 92). Its
JFIF resolution is kept, swapped for quarter turns, so the natural size
on the page stays right. Other images, JPEGs without the tag, JPEGs that
fail to decode and photos over 64 megapixels are embedded unchanged, as
before. Fill & Sign image signatures already applied the tag.
* Image signatures stay upright and anchored on rotated pages (part of #434)
On a page with /Rotate 90, 180 or 270 an image signature turned with the
page, because its picture was drawn along user-space axes while the click
or the "at" argument is a displayed point. It was also anchored at the
wrong point: its left edge and vertical centre were taken in user space,
so on a 90 degree page the image centre ended up elsewhere.
The signature's appearance now carries the counter-rotation as its form
/Matrix, which viewers fit to /Rect, so the picture reads upright as
displayed. The page's rotation is kept in /PCPictureRotate, so restyling
regenerates the same matrix and moving and resizing keep it. The box of the
signature runs along the displayed axes, so its left edge and vertical
centre are where they were asked for. The page view matrix in
pdfcraft-model is split out as view_matrix_for.
The Fill & Sign preview and the live move/resize preview draw the picture
the way the appearance does, and the resize handles keep the image's
proportions as displayed. comment_image_preview reports image_rotation,
how far the image is shown turned (0 for one placed upright).
Custom image stamps are left to #473.
* Use is_multiple_of for the quarter-turn checks (clippy) (#434)
* Probe the pointer preview away from egui_kittest's drawn cursor (#434)
The kittest render paints a mouse cursor (a 16 px triangle with a black outline) at the
hover point, so the 2 pt probe beside the pointer landed on its outline when zoom and view
rotation made 2 pt only a pixel or two. Put the stroke's block at the picture's right end and
probe there and at its far margin instead.
#260 (page 7) compares PdfCraft with Acrobat, which draws an Ink
annotation's /InkList as a smooth curve through the points;
pdfcraft-annot drew straight segments between them (as MuPDF, Poppler
and PDFium do). A stroke of three or more points is now drawn as a
Catmull-Rom spline through every point, written as cubic Béziers: the
curve leaves each point parallel to the chord between its neighbours,
and an end uses itself as the missing neighbour. Two points stay a
line and one point a dot. This is the appearance PdfCraft writes for
its own ink, signatures drawn with Fill & Sign included, and, with the
display-only appearances for comments that have none, how ink without
/AP is shown.
A curve can swing beyond its points, so a new ink annotation's /Rect
now also covers the curve's control points (the curve stays within
them); before, only the points plus the line-width margin.
Test: annot tests::ink_strokes_are_smooth_curves_through_their_points
checks the exact curve for a three-point stroke, a line for two points,
a dot for one, and a /Rect that holds a stroke whose curve rises above
its highest point (22 on main, 23.667 now). The comment.pencil parity
entry cites it.
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
Co-authored-by: Brandon Thomas <echelon@gmail.com>
* M12: add calibrated 2D measurement tools
* M12: harden measurement tools for landing (#208)
Bounded snap targets (endpoints only for accepted segments, page-wide cap),
lenient extraction (deep q nesting and undecodable streams are skipped and
reported), per-page snap cache, measure::list reports unsupported entries
instead of failing, closed polygons with a repeated vertex, printable unit
labels (m²), cached panel listing, WinAnsi captions, indirect /VP kept,
measure.export skipped in the command test like other pickers, missing
translations, honest parity (scale and distance partial) and ROADMAP.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Brandon Thomas <echelon@gmail.com>
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
The app, crates, binaries, bundle id, packaging, icons, screenshots and docs are now
PdfCraft / pdfcraft (repo storytold/pdfcraft). On first launch the desktop app moves the
PrintCraft settings and crash-recovery folders to the new name, and both apps read settings
saved under the old storage key, so upgrades keep recent files, preferences and unsaved work.
The signing test fixtures keep their PrintCraft subject names (they are binary).
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
Stable clippy 1.99 denies chunks_exact/chunks_exact_mut with a constant
size (32 sites), which failed the test job on main and every open PR.
Behaviour unchanged; MSRV 1.90 has as_chunks.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
KenM76andClaude Opus 5.5
archamon
Dylan M. Taylor
aiongg
mtlcl410andClaude Opus 5.5
Adrian
jonathanwxh-cell
Earl Co
alexanderalber
Márk BartalosandBrandon Thomas
Zeyu LiandBrandon Thomas
Justin WilkinsandBrandon Thomas
cyfung1031
MarekSpodBiedry
