* Redaction: a pattern nothing paints with any more leaves the page
A tiling pattern's cell is a content stream of its own and can draw
anything, text included. Redacting a shape filled with such a pattern
removed the fill from the page's content -- the page looked right, a
black box -- but left the pattern in /Resources /Pattern, and its cell,
with the text that was under the mark, was written into the saved file
unchanged.
The pass does not enter pattern cells, so it cannot redact inside one.
What it can do is notice that nothing paints with the pattern any more.
The graphics state now carries the fill and stroke pattern a `scn` or
`SCN` selected (and `cs`, `g`, `rg`, `k` and their stroke forms clear
it), every painting operator that survives the rewrite records the
pattern it drew with, and a pattern the page selected but no surviving
paint used leaves the page's resources.
Measured on the report's file:
before applied: 1, (SECRET) in the saved bytes
after applied: 1, no /Pattern on the page, (SECRET) gone
A pattern some surviving paint still uses is kept, and so is its cell:
with two boxes filled from one pattern and only the first marked,
patterns_removed is 0 and the resources keep the entry -- the second box
still shows the word, so it is not a leak.
Report gains patterns_removed.
Fixes#3647.
* Keep a pattern every operator that can paint with it still uses
Two defects CodeRabbit found in the first version of this change, both
of which could remove a pattern the page still draws with.
Pattern use was recorded for path painting only. Text shows with the
fill pattern too -- and with the stroke pattern in the stroking render
modes -- as do image masks and anything a form draws, and a form's
content is interpreted with a graphics state of its own, so a pattern it
inherits is never seen inside it. Content like
/Pattern cs /P0 scn 20 140 100 30 re f BT (KEEP) Tj ET
with the box redacted therefore lost the fill of text still on the page.
Every operator that can paint with the current pattern now records it:
text (except mode 3, which paints nothing, and mode 7, which only
clips), inline images, and image or form XObjects. Only path painting
knows exactly what it drew and whether the paint survived, so the others
are recorded as they are met. That can keep a pattern whose paint was in
fact all redacted, which costs an unused resource entry, while dropping
one something still draws with takes paint off the page.
/Resources /Pattern may be an indirect object, like any value. Reading
the reference itself as a dictionary found none and pruned nothing, so
on such a file the cell -- with the text that was under the mark --
stayed in the saved bytes, which is the leak this change is for. It is
resolved now, and what is written back is a dictionary of this page's
own, so pruning never reaches through a /Pattern dictionary another page
shares.
The controls in the test: without the first fix the surviving text's
pattern is removed (left: 1, right: 0), and without the second the
indirect file prunes nothing (left: 0, right: 1).
* M8: refuse retained unsafe tiling patterns
* M8: guard shared appearances and narrow pattern scans
* M8: update TLS dependencies for new advisories
* Redaction: the comment on prune_patterns said more than the code does
`prune_patterns` drops the `/Pattern` resource entry; the `scn` that selected
it stays in the content, so the page names a pattern its resources no longer
hold. The comment claimed the selector went too (noted in review).
ISO 32000-1 8.6.6.2 makes that operand a key of the `/Pattern` subdictionary,
so the open question is whether a reader stops reading the stream at the stale
name. `a_page_whose_pruned_pattern_is_still_selected_renders` answers it with
the renderer rather than with prose: the redacted page is saved, reopened and
rasterized, and
* it renders with no error and the same 300x300 page box,
* the text written *after* the stale selector is still painted -- which is
exactly what a reader would drop if it gave up at the bad operand,
* the redaction overlay is black over the box the pattern filled.
Control: with the drawing after the selector removed, the pixel assertion fails
("the text after the stale selector is still painted"), so it is reading that
text and not a stray pixel.
The selector is left in place rather than cut out: removing operators is a
rewrite of the content this pass does not otherwise do, and nothing surviving
paints with that colour. `pdfcraft-render` is a dev dependency of this crate
only -- layer 4 on layer 3, which the layering allows.
* WIP: pattern guard depth bound sized from the interpreter's
* Pattern tests: keep the guard's cases reaching the guard now a hit path is removed whole
* Pattern automation tests: keep the pattern in use where they test the guard, since a hit path is now removed whole
* Redaction: a form without resources keeps the page pattern it still paints
A form with no /Resources of its own paints with its caller's patterns, but
its surviving pattern paint was recorded only in the form's own output and
never reached the page. With the page's own fill under the mark removed
whole, prune_patterns then dropped /P0 from the page while the form outside
the mark still painted with it, so that fill lost its paint in the saved file.
Pass the painted names up from a form that inherits its caller's resources.
Only the painted side goes up, so this can keep a pattern, never prune one.
* Redaction: a pruned pattern does not stay named by the page tree
prune_patterns writes only the page's own /Resources, and the guard walked
only pages' effective resources. A /Pages node that still named the pruned
pattern kept its cell reachable from Root, so a full save wrote the cell,
text included, while apply returned Ok. Three shapes did it: a page with no
/Parent inheriting from the root, a /Parent that disagrees with the /Kids
tree, and a root /Resources shadowed by a nearer holder that was retired.
Patterns pruned from a page are now unlinked from page-tree holders no page
inherits from, as unlink_doomed does for XObjects, when every /Parent agrees
with the tree. Whenever a pattern was pruned (or a selected page had any),
the guard also inspects the /Resources of every /Pages node Root reaches
down /Kids and up each page's /Parent chain, so whatever stays reachable is
proven safe or the redaction is refused, leaving the document unchanged.
* Redaction: a Type 3 glyph without resources keeps the page pattern it paints
A Type 3 font with no /Resources looks the names in its glyph descriptions
up in the resources of the page or form showing it, so a glyph outside the
mark can paint with the page's pattern. Text recorded only the fill and
stroke pattern of the graphics state, so with the page's own fill under the
mark removed whole, prune_patterns dropped the pattern and the glyph lost its
paint. Showing such a font now keeps every pattern of the scope, as a form
without /Resources keeps what it paints.
* Redaction: say what text-recorded pattern use keeps
Text, inline images and XObjects record their pattern before the hit test,
so a pattern painted only by redacted text keeps its cell. The guard refuses
a cell with text or images; a vector-only cell stays in the file. The comment
said this cost only an unused resource entry. Pin the behaviour in a test.
* Redaction: the page tree is followed up every /Parent link
A full save writes every node a /Parent link reaches, but the guard followed
/Parent only from pages and stopped at the first node it had already seen,
and unlinking never followed it. A /Pages node reached only through the
/Parent of a /Kids node -- a root /Pages with a /Parent, or an intermediate
node whose /Parent leads out of the tree -- kept naming the pruned pattern,
and its cell, text included, stayed in the saved file while apply returned
Ok.
The guard now follows /Parent from every node it visits, page or /Pages, with
the same seen-set against cycles. Unlinking treats a root with a /Parent as an
inconsistent tree, like a disagreeing link, and leaves the decision to the
guard, which inspects every node those links reach and refuses an unsafe
cell.
* Redaction: a long page tree does not exhaust the pattern guard's budget
The page-tree walk counted every node, pages included, against the guard's
16,384-object budget, so redacting a pattern page of a 17,000-page document
was refused with a limit error where it had applied before. Only the holder
nodes the guard inspects count against that budget now; the walk itself is
bounded at a million nodes, as unlink_doomed bounds the same tree.
* Redaction: a Type 3 font set by an ExtGState or shown in a form keeps the page patterns
The resourceless Type 3 check covered only a font set by Tf in the scope that
paints. A Type 3 font without /Resources set through an ExtGState /Font entry
was not flagged, and a glyph shown inside a form with /Resources of its own
recorded its patterns in the form's scope, which the page never saw. In both
cases the page's own fill under the mark was removed whole, prune_patterns
dropped the pattern, and the glyph outside the mark lost its paint.
An ExtGState font is now checked the same way, and a glyph shown in any
nested form marks the page as keeping every pattern it selected. This can
only keep patterns; whatever is kept is checked by the guard.
* Redaction: a pruned pattern a full save would still write is proven safe or refused
The walks that check retained pattern cells follow the references they know
-- resource categories, the page tree, appearances -- but a full save writes
whatever the trailer reaches by any reference. A direct /Parent dictionary, a
/Kids array on a page, or a stray resource entry (/Shading naming the pattern
stream) kept a pruned cell, text included, in the saved file while apply
returned Ok.
pdfcraft_cos gains reachable_objects, which runs the same breadth-first walk
write_full uses (factored out as full_save_order, so the two cannot drift).
Before apply succeeds, every pruned pattern that walk still reaches is
inspected like a retained cell: vector-only passes, anything else refuses
with the existing pattern error. It runs only when a pattern was pruned and
costs one walk of the reachable objects.
* Redaction: a direct /Parent dictionary is part of the page tree too
A /Parent given as a dictionary rather than a reference is written inline by
a full save, but the page-tree walk followed /Parent only as a reference, and
unlinking took such a tree for consistent. A root /Pages whose direct /Parent
held /Resources naming the pruned pattern kept its cell in the saved file.
The guard now walks a direct /Parent like any node (its /Resources, /Parent
and /Kids), and unlinking counts any /Parent that is not the reference /Kids
came from as an inconsistent tree, leaving the decision to the guard.
* Redaction: page-tree walks queue each node once and borrow /Kids
On a hostile tree whose /Pages nodes share one long /Kids array, the guard's
page-tree walk and pattern unlinking pushed every /Kids entry of every node
before checking whether it had been seen, and copied the array on each
visit. Both now queue only nodes not seen yet and read /Kids in place;
unlinking also stops at the first node reached twice, since its /Parent can
agree with at most one of the nodes above it, and leaves that tree to the
guard.
* Redaction: a Type 3 font with /Resources null is resourceless too
/Resources null is the same as no /Resources, but the check counted any
entry, so such a font's glyph outside the mark lost the page pattern it
painted with. A Type 3 glyph shown by a kept annotation appearance is a known
limit, pinned as an ignored test: appearances are not interpreted for pattern
use, and under ISO 32000 the glyph resolves in the appearance's own resources.
* Redaction: a pruned pattern is recorded along its whole reference chain
A pattern name can lead to a reference-valued object whose value is the cell
(/P0 7 0 R, object 7 being 6 0 R). Pruning recorded only object 7, so the
reachability backstop checked an object nothing reached while a stray
reference kept the cell, object 6, in the saved file. Every object along the
chain is recorded now, bounded like the other walks.
* Pattern tests: pin the file identifier where two saves are compared
main now gives a redacted rewrite a new identifier from fresh entropy, so an
incremental and a full save after Apply differ in /ID alone. The test that
checks they are the same save passes fixed entropy to both.
* Redaction: replies and pop-ups removed on other pages feed the shared-appearance check
Apply checks every page for retained unsafe pattern cells when a removed
annotation's appearance is shared with one that stays on an unselected page.
Only annotations removed under a mark fed that check. Replies and pop-ups
that go with them in step 2b (removed_everywhere), often listed on another
page, did not, so a text-bearing cell in an appearance a kept annotation
shares with them escaped the all-pages check and Apply returned Ok.
Their appearance references now go into removed_appearances too, with the
same limit. Raised by FredApps' review of the rebase.
---------
Co-authored-by: skylar taylor-barrick <hi@skylar.cc>
An image that shared a redacted image's /JBIG2Globals is now stored
again as the smallest of Flate, Group 4 or JBIG2 coded alone (smallest),
like a cleared copy, rather than always Flate, so the other pages of a
scan don't balloon either. The shared-globals test's second page is a
ragged scan and checks it is no longer Flate and is smaller.
A JBIG2 image's /JBIG2Globals hold the symbol dictionary of every image that
shares them (jbig2enc -s and most scanners give one to all of a scan's pages),
so the bitmaps of marks drawn only under a redaction stayed in the file while
another page's image used them. Every image using the globals of a removed or
replaced image (or of one in a removed or replaced form) is now decoded and
stored again in place as Flate without them; a full save then drops them. One
that can't be decoded for certain refuses the redaction
(RedactError::SharedJbig2Globals). Report::images_restored counts them.
Four ways round the allowance, each measured by a review of hostile input:
A Flate stream read as zlib that fails at once, and then as raw deflate that
decodes everything before failing, gave nothing back and so was charged
nothing, here and in DecodeBudget: 110 s for a 387 KB file, all decoded. What
the retry decoded now counts, though the data is still dropped as it was.
Fax and 1-bit Flate images paid by the byte for work done by the pixel: 19
bytes can be a blank page of 100 million pixels, about a second each. Every
image decoded here now pays for its pixels first, as JBIG2 already did.
A JPEG paid nothing, and what one asks for doesn't grow with its length: 156
bytes declared 80 megapixels, 72 s for an 8 KB file. A JPEG pays for its
samples before it is decoded, in Optimize and in an export that has to decode
one for its mask.
Merging fragments paid for reading strips and not for the picture it built:
393 s for 1,154 bytes. It pays for the picture before allocating it.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01AmsdeUCdTaD72jkDw2pJKY
Filters were charged only for what they handed a JBIG2 decoder, once they
had handed it over: a chain that failed, or went past its image's limit,
cost its time and nothing else, and images that weren't JBIG2 weren't
charged at all. A 734 KB file of 200 images of Flate inside Flate took an
image export 111 s, and that grew with the file. It now takes 12 s.
Each byte read and each byte a stage decodes is now a step of the same
allowance, paid as it happens, so no stage runs past what is left. That
holds for every image read through ImageBudget, and a fax image pays for
its rows and its code. JBIG2 globals pay when they have to be read, and
kept ones don't. Optimize's two reads that went round the budget go
through it, and merging fragments shares it.
Optimize reads an image twice, to pack it and to resample it, so a refused
image is now counted once a run rather than once a read.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01AmsdeUCdTaD72jkDw2pJKY
From a review of who reads a refusal.
The rule is to leave it out and say so, and it held on some paths only. An image whose JBIG2 mask is
refused no longer comes out opaque. The first image past the allowance reads as that and not as
corrupt. A page reports what it left out. The Office warning stopped blaming forms. Redaction refuses
the run, leaving the document as it was: removing a readable image whole would take what no mark
covers with it, unreported.
The 2 GiB an export holds is twice the document if that is more, so a large honest file loses nothing.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01AmsdeUCdTaD72jkDw2pJKY
One image has its own limit, about 6 s to 17 s, but nothing bounded a file of thousands of images
made to reach it: an operation took that long for each, and an image sharing /JBIG2Globals decodes
them again.
Image::decode_within (hayro-jbig2 patch 11) spends from what a run may still do, starting with its
page's pixels, and charge_reading charges reading a stream and its globals, 4 steps a byte, before
anything is parsed, so an image that fails has paid too. pdfcraft_filters::decode_jbig2_within takes
it, and ImageBudget in cos is that allowance: 2^34 steps, about 1,000 scanned pages, and 2^13 more for
each byte of the file, so a long scan is read whole. An image past it spends all that's left, and
later ones aren't read, globals included.
Optimize leaves such an image as it is and counts it in Report::images_refused. Image export leaves it
out, with the reason, and stops at 2 GiB of files held. Office export shares one allowance, leaves the
picture out and says the page was truncated. Redaction removes it whole, as any image it can't read.
Rendering gives a page's images 2^30 steps between them, inside the watchdog, and each page starts
afresh in Context::new as its other budgets do (hayro-syntax patch 31, hayro-interpret patch 73).
It's a thread-local, unbounded until a page sets it.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01AmsdeUCdTaD72jkDw2pJKY
Redaction wrote every cleared copy as Flate, so a redacted Group 4 or JBIG2 scan
page grew several times over until the optimizer ran. A cleared one-bit image of one
component is now stored as the smallest of Flate, CCITT Group 4 and, when it was
JBIG2, JBIG2 (PDF 1.4, which such a file already is), as stored, dictionary included:
a tiny image can lose by Group 4's parameters. Both are coded from the
cleared samples, so nothing of the original's code is carried over; rows Group 4 or
JBIG2 can't code (too wide) leave Flate. Images of more bits stay Flate.
Tests: a cleared one-bit Flate scan of ragged word blocks (where Group 4 is smaller
than Flate) comes out Group 4 and an eight-bit image Flate, each decoding to the
cleared samples (the whole buffer); a tiny image whose Group 4 code is shorter but whose
stream isn't, and rows wider than Group 4 codes, stay Flate and clear; the redacted
JBIG2 scan of #5461's test comes out JBIG2, smaller than
Flate, with no globals and no stream holding the original code. The tests' image
helpers decode through Document::decoded_image, as image codecs need.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Part of #283. A scan stored as JBIG2 (as the optimizer writes them) is decoded
through Document::decoded_image_within, its /JBIG2Globals included, and its covered
pixels cleared in a Flate copy that refers to no globals, as CCITT fax images are.
Before, any JBIG2 image under a mark was removed whole, blanking the page.
Still removed whole (fail-closed): a JBIG2 page of another size than the image,
which decoded_image refuses (the renderer draws the whole page into the image, so
the rows cleared wouldn't be the ones shown); globals that can't be read; damaged
data; an image claiming more than one bit or one component, even where its rows
take as many bytes; a page far past the image's raster, refused before it is
decoded.
Globals no other image uses leave the file with the original on the full rewrite
(tested); globals another image still uses stay, and the README and parity note say
they may hold the shapes of marks from under the area, not where they were.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
PdfCraft's bootstrap renderer draws byte-aligned Group 3 whose fill ends
each end-of-line code on a byte (as TIFF writes it) as other rows than
decode_ccitt reads (black box, at every /K, with /EndOfLine or not:
mostly the first row, then blank). Redaction cleared pixels in the
picture decode_ccitt reads, so a mark over what PdfCraft showed needn't
cover what was cleared, and content shown blank stayed in the copy. Such
an image (/K 0 or more, /EncodedByteAlign) is now removed whole, as
every CCITT image was before this PR; Group 3 off bytes and Group 4 are
still cleared.
The image's parameters come from Document::fax_params, the reading of a
fax image's /DecodeParms entry that decoded_image already did, now on
its own (it was to come with #4404, which uses it too). The redaction
README, the module doc, the redaction and core.image-filters notes and
the spec parity table's status line and revision row say so, and the
core.image-filters note now records the renderer's misdrawing.
group_3_on_bytes_is_removed_whole_and_other_fax_images_cleared: a white
16 × 2 picture, checked to decode as such, is removed whole on bytes (no
codes; codes at /K 0; at /K 1 with /EncodedByteAlign by reference) and
cleared off bytes and as Group 4 on bytes. It fails without the guard;
cargo-mutants catches every viable mutant of it.
From reviews with the pdfcraft-review skill.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01P6yUtvWGPsJpMLyh6pxSXG
decode_ccitt reads byte-aligned Group 3 whose data has end-of-line codes
but none before the first row (not as T.4 sends them) on bytes. At /K 0
with the fill ending each code on a byte, about one small picture in
five is then read as other rows; at fax width almost none are, as such
pages come out short and are refused. Export already said so. The
optimizer, when it resamples such an image or stores it again as Group 4
from behind another filter, and redaction, when it clears pixels in one,
write those rows back, and nothing said that.
Black-box, PdfCraft's renderer draws such an image exactly as
decode_ccitt reads it (all 42 misread of 200 seeded pictures, behind
ASCII85Decode too), so the written image is what PdfCraft showed before.
Refusing such data instead (a code after nearly every row but none
first) would also refuse some ordinary Modified Huffman images, whose
rows can meet 11 zeros by chance (0.5 to 5% of small ones in a
black-box probe), so the limit is stated rather than guarded: in
decode_ccitt's doc, the filters, optimize and redact READMEs, and the
core.image-filters and mono-compression notes. The optimize README's and
the mono-compression note's "not yet: Group 3 to Group 4 without
resampling" now say a lone Group 3 image: one behind another filter is
stored again as Group 4.
Also from the review: docs/roadmap.md keeps #4335's status line under
this PR's, rather than replacing it; the filters README's tests and the
core.image-filters evidence name the Group 3 layout test; the filters
crate's description names Group 3 and 4 decoding.
From reviews with the pdfcraft-review skill.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01P6yUtvWGPsJpMLyh6pxSXG
Mutation testing found behaviour no test held, now covered:
- a Group 4 halftone above 450 ppi isn't resampled and stays byte for
byte, alone by default and behind ASCIIHexDecode with Retain;
- under Retain a resampled Flate scan stays Flate, though Group 4 would
be smaller (ragged bands);
- sixteen-bit grey of only 0x0000 and 0xFFFF keeps its bytes;
- a busy Group 4 image behind ASCIIHexDecode, whose code is over three
times its raster, decodes within the fax bound and is stored again as
Group 4 alone. Redaction's busy-fax test is that busy again: since the
bound for other images is three times the raster, the old checkerboard
fitted it, and dropping the fax bound passed.
The redaction README says three times, and doc_optimize's description
says what Retain keeps: CCITT stays CCITT, anything else becomes Flate.
From reviews with the pdfcraft-review skill.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01P6yUtvWGPsJpMLyh6pxSXG
- Redacting a CCITT image went through decoded_image, which undoes the
filters before the fax decoder up to MAX_DECODED, so a Flate bomb in
front of a fax image cost a gigabyte while every other image stops at
twice its raster. Document::decoded_image_within takes a bound, and
redaction gives a fax image's code about a byte per pixel. A fax image
cut short, or behind a bomb, is removed whole; a busy one whose code
is bigger than twice its raster is still cleared.
- Every image is now decoded through decoded_image_within, which reads
/DecodeParms through Document::with_direct_parms: given by reference,
the numbers inside (/Predictor 7 0 R) included. That reading was first
written here and has moved down to #4304. The predictor test now covers
the dictionary, an array's entry and the number itself given by
reference; read without them, the cleared bytes drift off the covered
pixel and the covered sample stays in the copy.
From reviews with the pdfcraft-review skill.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Create PDF and the optimizer now store black-and-white scans as Group 4,
and redaction couldn't decode CCITT, so redacting one word on such a
scan removed the whole page image. A CCITT image (the last filter,
after any others) now decodes through Document::decoded_image and is
cleared in a Flate copy like any other image; one that can't be decoded
in full is still removed whole.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
The apply section of the redact README described the fail-closed rules but not the new refusal of a Redact annotation with neither a usable QuadPoints array nor a usable Rect. Documented here with the error name and the page scope of the count. No behaviour change in this commit.
Redaction removed annotations and form fields under a mark from the pages
but left the structure tree's /OBJR references to them, so a full rewrite of
a tagged PDF kept the comment's /Contents and the field's /V. apply now
drops references to every annotation no page lists afterwards (widgets of a
removed field on other pages included), as Sanitize does since #2532, and
fails closed with RedactError::Tags when an element can't be edited.
* M8: redaction removes the replies of the annotations it removes (#2659)
A reply (/IRT) placed away from the mark survived, and its /IRT kept the
removed annotation - its comment text and the QuadPoints of the redacted
words - in the saved file. Replies to a removed annotation, and replies to
those, now go with it.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01RUNQSPVXx3dDBabRZHAnjz
* M8: test replies listed before their parent, with a pop-up on a reply (#2659)
Review of #2697: the replies precede the annotation they answer in
/Annots, deepest first, and a reply has a pop-up. A single pass in
/Annots order would keep them; the test fails with the loop cut to one
pass, which the first test does not notice.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01RUNQSPVXx3dDBabRZHAnjz
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
Consolidate the reviewed change and its follow-ups on current upstream.
Original change notes:
M8: Bound and reuse repeated redaction overlays
Prepare appearances within a shared 8 MiB budget before changing the document. Reuse one measured and encoded row, reject excessive geometry, and preserve document and undo state on refusal.
Fixes#1326
M8: Preserve upstream font metrics in bounded redaction overlays
M8: reuse ordered redaction mark groups (#1326)
Co-authored-by: LabDennis <341377186+LabDennis@users.noreply.github.com>
* M8: Retire inherited redaction resources
* Redaction: pin inherited resources only on redacted pages, shared by reference
localize_resources rewrote every page in the document on every apply and copied a direct
inherited /Resources dictionary into each one, so a large document grew by N x the dict.
Now only redacted pages that inherit resources are pinned; a direct inherited dictionary is
made one indirect object and shared by reference. The parent's /Resources is retired when no
other page still inherits it (the leak fix), and kept (through the shared reference) when an
unredacted page still draws with it. A /Parent chain that can't be followed or disagrees with
the page tree retires nothing. Tests: an unredacted page is left untouched and the rewrite is
bounded; redacting every inheriting page retires the parent's resources. ROADMAP entry moved
into the revision-history table.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Brandon Thomas <echelon@gmail.com>
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* M8: redaction code sets (U.S. FOIA, Privacy Act) as overlay text
Redaction properties offers "Custom text" or "Redaction code" under "Use overlay
text". Picking the U.S. FOIA (5 U.S.C. 552(b)) or U.S. Privacy Act (552a) set and
ticking codes makes new marks carry them as overlay text, in the set's order.
redact_mark takes code_set and codes and rejects unknown sets or codes with the
allowed list.
Also merges a duplicated evidence/notes pair in form.field-list that made
parity/acrobat-features.toml fail to parse on main.
* M8: say why the default redaction code set can't fail
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Tests: pin the clock in form_bulk (saves a second apart differed in /ModDate on Windows CI)
---------
Co-authored-by: Brandon Thomas <echelon@gmail.com>
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
The app, crates, binaries, bundle id, packaging, icons, screenshots and docs are now
PdfCraft / pdfcraft (repo storytold/pdfcraft). On first launch the desktop app moves the
PrintCraft settings and crash-recovery folders to the new name, and both apps read settings
saved under the old storage key, so upgrades keep recent files, preferences and unsaved work.
The signing test fixtures keep their PrintCraft subject names (they are binary).
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>