Each RAW_SAMPLES entry now carries its SHA-256 (computed from the file as downloaded; the ProRAW value was only a comment). cargo xtask corpus --download hashes every file, new or already present, deletes any mismatch so the next run fetches it again, and fails listing the actual and expected hashes. A unit test keeps names unique and hashes well-formed.
Samsung SRW raws whose raw IFD (private compression 32769 or 32770) stores the samples uncompressed are decoded from the sensor data: 12-bit samples packed two in three bytes (bit order told apart from the samples; NX5, NX10, NX11 and NX20, NX200, NX210, NX1000, NX1100) and 16-bit little-endian words (EX1, WB2000). CFA layout from the raw IFD's CFAPattern; framing, white balance, black and saturation levels from the maker note (value offsets relative to the note; the vectors are stored offset by its EncryptionKey); a one-direction Exif picture size crops to the centre of the framing; black from dark rows or columns when the file states none; saturation plateau below the stated level wins. Compressed codings (32770 with fewer bytes, 32772, 32773) stay preview only with that reason. srw is imported from folders; SRW takes the file-local camera look. RENDER_CACHE_VERSION 17.
Resolve the docs/parity.md conflict, keep the HEIC rows. `cargo xtask ci` gets
a heif step (clippy + tests for lightcraft-codecs with --features heif), since
the workspace build leaves the feature off. The Cargo.toml comments no longer
say official builds enable it; the web one notes that wasm32 aborts on panic.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Parse ProfileGainTableMap (DNG 1.6) and ProfileGainTableMap2 (DNG 1.7):
both versions, DNG 1.7 precedence (version 2 in IFD 0, then the raw IFD;
version 1 in the raw IFD, then IFD 0), u8/u16/f16/f32 gains, gamma.
Malformed tags (wrong size, zero or huge grids, non-finite or negative
gains, bad spacing or gamma) are ignored, never allocated for.
Byte order: the specification gives this tag no byte order of its own,
unlike opcode lists, so the payload is read in the file's byte order with
a big-endian fallback; a wrong-order read can't pass the size checks.
The module docs quote the DNG 1.6 "Byte Order" rule.
The map is kept in ColorData, written back by the DNG writer (version 1,
or version 2 when its gamma isn't 1) and dropped from merge outputs, whose
geometry no longer matches the capture's active area. It is not applied
to the render: Lightroom Classic renders Apple ProRAW without it.
Supersedes the parser of #273.
The CC0 iPhone 12 Pro ProRAW from raw.pixls.us joins the corpus.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Decode lossless CRX and version 0x100/0x200 C-RAW in portable Rust,
including sensor geometry, timed white balance and black/white levels.
Verify all sensor samples against six independent M50/R100/R8 references.
Any CR3 decode error falls back to the embedded JPEG, as CR3 files did
before this decoder. The full sensor buffer is allocated only after the
first plane decodes, and plane buffers grow row by row. Tile planes
decode in parallel with a windowed bit reader (24 MP: 424 -> 89 ms
lossless, 519 -> 138 ms C-RAW on an M4).
Add guarded CR3 camera-JPEG colour fitting with independent framing
validation, relative white balance and cache invalidation.
Validation: cargo xtask ci.
Installed RAM overcommits a busy machine: on a 32 GB desktop with browsers,
a VM and editors open, about 7 GB was free and the installed-RAM rule chose
16 jobs. A fresh build then pushed free RAM below 1 GB.
`cargo xtask ci` now uses one build job per 1.5 GB of RAM available when it
starts (Linux MemAvailable, Windows AvailableMBytes, macOS free + inactive +
speculative pages), capped at the CPU count. With line-table debuginfo,
4 jobs measured about 3 GB in use, so this leaves about half the available
RAM spare. If available RAM can't be read, half the installed RAM is
assumed; if neither can, 4 jobs. Test threads follow, capped at 4.
Explicit CARGO_BUILD_JOBS / RUST_TEST_THREADS still win.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
#243 dropped every result whose request id wasn't the newest for its slot. The loupe requests a new
draft every frame while a slider moves, so when a draft took longer than a frame nothing landed
until the drag paused. Main, Before and Hover now take a superseded draft that is newer than what
they show (never one from before a library or preview-cache reset, never an error or its source).
Also saturate the xtask RAM rounding.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
The fixed four jobs were safe on 8 GB but too many for 4 GB, and slower than
needed on large machines. `cargo xtask ci` now uses one build job per 2 GB of
installed RAM, capped at the CPU count, and 4 if the RAM can't be read
(/proc/meminfo, Win32_ComputerSystem, hw.memsize). With line-table debuginfo,
4 jobs measured about 3 GB of RAM in use and 2 jobs about 1.5 GB.
Test threads follow but stop at 4: more barely shortens CI, and at 16 threads
on a loaded machine the wall-clock frame-budget test
offline_originals_never_block_a_frame failed (one 303 ms frame). Explicit
CARGO_BUILD_JOBS / RUST_TEST_THREADS still win.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
A full-debuginfo workspace test build with one rustc/link.exe per CPU peaked
at 14-20 GB commit on a 32-thread Windows machine before any test ran; the
test binaries themselves peak at about 3.3 GB each. `cargo xtask ci` now sets
CARGO_PROFILE_DEV_DEBUG=line-tables-only, CARGO_BUILD_JOBS=4 and
RUST_TEST_THREADS=4 unless they are already set. Ordinary cargo commands are
unchanged; GPU coverage is unchanged.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Decode every raw encoding Panasonic and Leica bodies write, from the DMC-LX1 (2005) to the DC-S1RM2 (2025):
compressed formats 4 (most bodies, 2008-2022) and 6 (S1 / S1R / S1H / S5, GH5M2), the prefix-coded strips of
format 8 (GH6 and later), packed formats 2, 5 and 7, and the 16-bit words of the 2005-2007 .RAW files. Until now
only format 5 decoded; every other Panasonic file opened as preview only.
Clean-room: no raw-decoder source was read. Tag names come from tag documentation; every encoding was recovered
by black-box analysis of 178 CC0 files from raw.pixls.us (118 bodies), and the module docs note the measurement
that settled each rule. Format-8 tags of unknown meaning must carry the values every sample has, otherwise the file
is reported as unsupported rather than guessed at.
Levels and geometry: formats 4 and 6 store samples 15 above the recorded black level (files without one use 15);
white is the active area's saturation plateau (the linearity limits are wrong on extended low-ISO shots, the GF1
and the Digilux 3); the in-camera aspect ratio is the default crop; mapped-out defect pixels are filled from
same-colour neighbours; the CFA pattern applies at sample (0, 0).
.rwl and .raw files are imported (engine, MCP folder expansion, file dialog, Linux MIME types). One file per
encoding joins the never-panic proptest; 11 CC0 files join `cargo xtask corpus`, and corpus_panasonic_encodings
checks each encoding's bit depth, black level, crop and CFA layout against the camera's own JPEG.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01QtQmZ6peZXGn3wiqeowV2v
LightCraft has no colour matrix for Nikon cameras. Because of this, NEF
files showed colours that were too gray and too green.
- Colour: LightCraft now calculates a colour matrix and a tone curve from
the JPEG preview in each NEF file. Sony ARW files use the same
procedure and the same quality checks. White balance is relative to
the as-shot look, as for ARW files.
- One function, camera_preview::file_local_look, selects the formats for
the fit and for the relative white balance. Photo::relative_wb in the
catalog uses the same formats.
- Black level: Nikon stores the black level (maker note 0x003d) in
14-bit units, also in 12-bit files. The decoder read it as a 12-bit
value. Because of this, 12-bit files from the D750, D780, D850, D7500
and Z 50 were too dark. Now the decoder divides the value by 4 for
12-bit files.
- The corpus gets the D7500 12-bit and 14-bit lossless samples. A test
compares their levels. The render cache version increases to 9.
Results on 13 NEF files that LightCraft can decode: LightCraft accepted
the fit for all 13 files. The mean colour difference from the camera
JPEG (CIE76 dE) decreased from 13-46 to 2.9-7.8. One file with mixed
light improved by a small quantity only (12.7 to 12.0).
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Sony bodies from before ~2017 (RX100–RX100M5, RX10, NEX, SLT, ILCE-6000,
A7/A7II/A7RII, ...) write no plain 0x7313/0x7310/0x74c7 tags in the raw IFD,
so the decoder used unit WB multipliers (strong green cast, e.g. the CC0
DSC-RX100M3 sample), black 512 (800 on 1-inch sensors), and kept padding
columns at the right edge.
- White balance: WB_RGBLevels from the maker note's enciphered Tag2010
block (layouts per ExifTool's Tag2010a..i tables; byte substitution
p^3 mod 249 checked black-box on 15 CC0 files: SonyISO matches Exif ISO,
ILCE-7M3 levels match its plain 0x7313).
- Black level: recovered from the encrypted SR2SubIFD by known-plaintext
analysis (constant key in every file; RX100M6/ILCE-7M3 plain 0x7310 as
plaintext; 8 keystream bytes at offset 2510, plausibility-checked).
- Crop: DNG DefaultCrop or the maker note's FullImageSize.
- "12-bit uncompressed" ARWs hold 14-bit-scale data: black/white follow it.
- Render cache version bumped; corpus manifest + corpus test, unit tests.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
The Bayer layout of Canon CR2 files differs by model (GBRG on the 7D, 50D,
60D, 550D, 600D, 1200D, 1300D, 5D Mark II, 1D Mark IV; RGGB on the 40D,
5D Mark III, 6D, 5DS R and others). Read it from raw IFD tag 0xc5e0
(CR2CFAPattern: 1 RGGB, 2 BGGR, 3 GBRG, 4 GRBG), anchored at the full
decoded sensor; fall back to RGGB when the tag is missing. No model table.
Checked on 35 decoded CC0 raw.pixls.us CR2s (35 models): the tag agrees
with the mosaic's green-diagonal statistic on every file; the SensorInfo
border parity does not predict the layout. Corpus manifest gains the
reporter's samples; a corpus test asserts each layout.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
- tiffraw: Mode::Header parses the first LJ92 frame header (Compression 7),
so probe_info reports Unsupported for subsampled frames (Sony lossless
M/S) as the full decode does, instead of claiming the file decodes.
- corpus: CC0 ILCE-7M4 lossless L/M/S samples from raw.pixls.us in
`cargo xtask corpus`; M/S listed as known unsupported.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
- ↑/↓ over any slider nudge it by ≈ 1/200 of its range (exposure 0.05, most sliders 1,
temperature 50 K; ⇧ ×5), one undo step each; the key doesn't also move the selection.
- ⇧Z picks and moves to the next photo (with ⇧X / ⇧U).
- library.source {kind: missing}: photos whose file can't be found; a "Missing Photos" row
appears in the left panel when there are any (checked every 5 s).
- Loupe context menu: Zoom submenu. Parity: stale rows fixed (compare/survey, per-camera
defaults, paste from previous, capture-time edit).
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
- Resize modes: long edge, short edge, width, height, W x H (either orientation), megapixels,
percent; "don't enlarge" (default on); ppi written to JFIF density / PNG pHYs / TIFF tags.
- Full-size export of a cropped photo now renders the crop at native resolution (it was
upscaled to the uncropped long edge).
- Formats: Original (file copied byte for byte + XMP sidecar with the edits, named after the
output) and DNG (raw photos re-encoded losslessly, edits in the embedded XMP).
- Export dialog: Resize-to dropdown, values, Don't enlarge, Resolution; DNG/Original hide
pixel options.
- lightcraft-cli render goes through the shared exporter (colour space, metadata, ppi) and
takes any app.export option via --opt KEY=VALUE; MCP export schema lists the new params.
- xtask resolves the workspace root at run time (a moved checkout broke ci).
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
cargo xtask parity verifies every cmd:/ctl: id and repository path cited in
docs/parity.md exists (engine commands and controls via lightcraft-cli, UI
commands from UI_COMMANDS), that row ids are unique and statuses valid, and prints
the per-section summary; --write refreshes the summary table. ci runs the
reference check after the tests. Parser, checker and summary are unit-tested.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
- embedded_preview: CR3 PRVW/THMB boxes (plus RAF, RW2, ORF, PEF from the
format commits); stops at the first valid box of each kind
- engine: raw variants that report Unsupported are probed and shown from
their embedded JPEG (orientation from the JPEG or the raw), not an error
- crates/raw/tests/corpus.rs: every corpus/raw file is recognised, has a
JPEG preview (DNG optional) and decodes or is a known-unsupported
variant; prints decode timings
- xtask corpus --download: 37 CC0 raw.pixls.us samples (matched by SHA-256)
- ROADMAP/crate docs: format coverage, NEF Huffman / RW2 format 4 /
compressed ORF+RAF gaps, neutral colour-matrix fallback
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
apps/lightcraft-web runs the egui UI in the browser (eframe web, glow/WebGL2):
procedural demo library on load; in-memory imports via file picker
(Cmd+Shift+I) and drag-and-drop (MemStore + bytes-based engine hooks);
export goes through app.export and downloads in the browser; `?bench` logs
first-frame and slider latency. `cargo xtask web [--serve [port]] [--dev]`
builds with the matching wasm-bindgen CLI into <target>/web/; the web app is
part of the CI wasm check. Wasm fixes: lazy profiling Instant in pipeline,
web-time clocks in ui-egui (render timings were 0 on wasm). Docs: docs/web.md.
No persistence on web yet.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Every image/icon/font/media/profile file must match an assets/ATTRIBUTION.md path pattern;
Adobe profile/template formats and Adobe-named assets are rejected.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>