* engine: bound Scenario Summary size and solver report name searches; charge comment and link text to undo history
* address review: count result rows in the scenario summary limit and reply/date vector storage in the history estimate
* FORMULATEXT and the cell editor keep a hidden formula's source hidden
* address review: recalculate formulas when sheet protection changes
* address review: skip the full recalculation for a no-op unprotect
* address review: recalculate on protect/unprotect without marking the edit structural
* Analysis ToolPak: stop building a report once it outgrows the output limit
Report builders filled their whole output map before write_report
checked its size, so Descriptive Statistics grouped by rows over a
tall, nearly empty column allocated about 16 entries for each of up
to a million variables before refusing the report.
Grid now tracks its extent as values are stored and keeps nothing
once the report's rows x columns pass MAX_OUTPUT_CELLS; write_report
refuses such a report. extent() no longer rescans every entry.
* address review: stop the descriptive builder once the grid is too large
* address review: descriptive statistics reads variables one at a time
* Wildcards: match * and ? patterns in one pass over the text
After a mismatch the matcher restarted the pattern after the last
star at the next text position, so a long repetitive cell against a
near-matching pattern cost text x pattern comparisons. AutoFilter
custom criteria, Find and Replace all call it once per cell.
wildcard() now runs the pattern as a bit-parallel automaton: one pass
over the text, one step per 64 pattern positions for each character.
Results are unchanged; a test compares it with the old matcher on
every short text and pattern over a small alphabet.
* address review: build wildcard literal masks lazily with a bounded cache
* address review: keep masks of the most frequent wildcard literals past the cache cap
* Forecast Sheet: count hindcast rows against the work limit
MAX_WORK bounded history rows x forecast rows, but a Forecast Start
inside the history adds a hindcast row for every history point after
it, each holding the same ETS formulas that refit the model over the
history before the start. Those rows were not counted, so a start in
the middle of 10,000 rows of history built millions of uncharged
model fits per recalculation.
The forecast row cap is now computed from the rows the model is fit
to, after subtracting the hindcast rows; a start so early that the
hindcast alone passes the limit is refused, and the default number of
periods stays within the cap.
* address review: base the in-history forecast cap on the slots the fit range spans
* address review: document the hindcast-aware forecast work limit
* address review: document the fitted-row minimum in the forecast work limit
* address review: say the forecast start row counts toward the hindcast work limit
* Find and Replace: bound the text a replacement builds
Each occurrence copied the whole replacement string, so a cell full of
short matches and a long replacement expanded tens of kilobytes of
input into about a gigabyte, in both the case-sensitive and the
case-insensitive paths.
Replacement now builds the new text only while it stays within
Excel's 32,767 characters per cell (counted as UTF-8 bytes, 4 each at
most) and within 256 MiB for the whole command, checking before each
copy. Past either limit the command fails and changes nothing.
* address review: enforce the 32,767-character limit on replacements and borrow the replacement text
* Get Data: refuse an import whose dense rows would be too large
data.getData and data.fromTextCsv built every row densely before
writing it: JSON records were padded to the union of all keys (found
with a quadratic Vec::contains scan), and CSV cells were expanded over
the whole used rectangle. A few sparse records or one far-away CSV
cell therefore allocated billions of slots.
The importer now collects JSON keys with a HashSet, refuses more keys
than a sheet has columns, and checks the projected rows x columns
against MAX_IMPORT_CELLS (10,000,000) before building any row.
* address review: stop collecting JSON keys at the column limit and reject oversized row counts before building rows
* address review: enforce the CSV import cell limit while parsing
* engine: Consolidate finds keys through hash maps and refuses an oversized table
data.consolidate searched the keys collected so far for every row and
column key, so 100,000 positional rows cost about five billion
comparisons. It also built every row × column combination without a
size check. Keys are now indexed, and a table over 5 million cells is
refused before it is built.
* address review: count label cells in the consolidate output limit
Go To resolved every visible name, and each alias inside a name was
looked up with Workbook::name, a linear scan of all names. A workbook
of many short aliases made the Go To list quadratic (or worse along
alias chains) in the number of names.
A Resolver now indexes the names by scope and folded spelling once
per command and remembers, per name, sheet and depth, whether a name
resolves and to how many areas, so listing names resolves each alias
once. Lookups keep the old precedence and matching rules.
draw_block checked every cell against every merge meeting the block,
and the fill, border and text passes searched the merge list again
for each merge start, so an imported sheet with many merge ranges in
a print area cost cells x merges (and merges x merges) comparisons.
The merges meeting a block are now gathered once and swept down the
rows: whether a cell is covered is a BTreeMap lookup among the merges
active on its row, and merge starts are found through a HashMap. A
merge overlapping one kept before it (only possible in a damaged file)
is left out, as Excel does when it repairs the file. Hyperlink
rectangles use the same index instead of scanning all sheet merges.
* M12.AR4: preserve Arabic logical text in bidi display and editing
* M12.AR4: drop the stale "no bidi" note from the RTL sheet status
* M12.AR4: open the Arabic editors and place the caret through key and pointer events in tests
* M12.AR4: skip the conditional-format lookup in the formula bar unless a rule sets reading order
* M12.AR4: test that the caret after typed Arabic is drawn at the text's left end (#1070)
* M12.AR4: pass the theme body font in the reading-order style test
* M12.AR4: adapt the Arabic UI tests to egui 0.37 (row direction, editor ids, Ctrl+End to the logical end)
* M12.AR4: read the active sheet through Workbook::active_sheet() in the formula bar
main made `Workbook::active_sheet` an `ActiveSheet` (shared between windows on one
workbook); the formula bar's reading-order lookup takes the index from the accessor.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* M12.AR4: keep explicit Left on wrapped right-to-left cells and trailing spaces in the editor
Wrapped cell text lays out every row from the left when the painted alignment is Left, instead of aligning right-to-left rows to their start. The cell and formula bar editor keep trailing whitespace in their layout so a right-to-left entry ending in a space keeps the caret inside the text.
* M12.AR4: keep Right and General on right-to-left sheets aligned right in wrapped cells
* M12.AR4: keep right-aligned Arabic with a marked first letter inside its cell
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
Co-authored-by: FredApps <153173854+FredApps@users.noreply.github.com>
Co-authored-by: FredApps <FredApps@users.noreply.github.com>
* M12.AR12: estimate Arabic text width from measured glyph widths in AutoFit
* M12.AR12: treat U+0897–089F as marks and U+08E2 as visible; size the honorific ligatures (review)
* M12.AR12: size the remaining honorific ligatures like their siblings (review)
U+FD4C-FD4F (Unicode 14) and U+FDC8-FDCF (FDCF Unicode 14, FDC8-FDCE
Unicode 17) are honorific word ligatures, not letters, but fell into
the 0.48 em letter arm. Give them the 1.6 em of the measured
U+FD40-FD4B honorifics and assert each range's endpoints.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* M12.AR12: size Arabic-Indic digits like ASCII digits and the remaining honorific ligatures (review)
Arabic-Indic (U+0660-0669) and Extended Arabic-Indic (U+06F0-06F9)
digits measure 0.53-0.57 em in Noto Sans Arabic, Arial, Tahoma and
Times New Roman, the same as each font's ASCII digits, so they get
the ASCII digit estimate (0.56) instead of the letter estimate.
Arabic punctuation measures 0.17-0.50 em, so it keeps 0.48 rather
than falling back to 1 em.
U+FBC3-FBD2 and U+FD90-FD91 are honorific word ligatures like
U+FD40-FD4F and get the same 1.6 em.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
Co-authored-by: FredApps <153173854+FredApps@users.noreply.github.com>
Co-authored-by: FredApps <FredApps@users.noreply.github.com>
* M12.AR7: sort Arabic text by its letters, not its vowel marks or digit script
* M12.AR7: order marked Arabic text the way Excel does
Checked compare_text against Excel 16.0 build 20527 (en-US) via COM:
Range.Sort, =SORT() and the < / = operators over ~300 strings. Fixes the
mismatches inside this change's scope:
- The tie-break compared raw code points, so an RLM-prefixed word sorted
after every vowelled form of it, "12" after "١٢", and a tatweel
form after a shadda form. Ignorable characters are now skipped at the
tie-break too.
- Marks are compared letter by letter (an unmarked letter first), so a
mark on an earlier letter outranks the digit or letter after it, as in
Excel ("ب١" < "بَ1", "بپ" < "بَپ").
- Marks rank in Excel's measured order (sukun before shadda), and the
Quranic marks Excel skips (U+0610–061A, U+06D8–06ED except 06DD/06DE/
06DF/06E0/06E5/06E6/06E9) are skipped by letter order.
- Excel also ignores bidi embeddings/overrides/isolates, BOM, soft hyphen,
CGJ and word joiner; they now are ignored too (ZWSP is not, as in Excel).
Equality is unchanged. Regression tests use the orders Excel produced.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* M12.AR7: compare the mark level of Arabic text without allocating
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
Co-authored-by: FredApps <153173854+FredApps@users.noreply.github.com>
rewrite_all_formulas borrows each tree with Formula::with_expr and calls
adjust_if_changed, so a formula the edit leaves alone is neither copied
nor printed, and a changed one is printed once. A legacy array whose
range moves while its formula stays the same still gets the new range.
Sheet rename and delete compare the adjusted tree with the old one
instead of printed text, and replace only formulas that changed. Delete
no longer rebuilds every formula in the workbook, so unrelated formulas
keep their array range and dynamic-array mark.
A stored non-canonical formula text is no longer re-printed by an edit
that does not change the formula; a test pins this.
Part of #3576
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Paste, Ctrl+Enter and Fill skip rows hidden by a filter (#1101)
Repeating one cell or row down a filtered selection (paste of a single
cell or row, Ctrl+Enter, Fill Down/Up/Right/Left) now leaves the rows an
applied filter hides alone, as Excel does. A taller pasted block still
goes straight down, and rows hidden by hand are still written, also as
in Excel. Each case was measured in Excel for Microsoft 365.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01A2bJ3LxrZ6YnmppgrfwHwr
* Copying a filtered range takes only the rows showing (#1101)
A copied range with rows hidden by an applied filter is split into its
runs of showing rows and packed like a multi-area copy (formulas as
values), so pasting it inside GridCraft no longer brings the hidden rows
back. One run is copied as a plain range, keeping formulas. Cut still
moves every row. All as measured in Excel for Microsoft 365.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01A2bJ3LxrZ6YnmppgrfwHwr
* Find the rows a filter hides without rescanning every table per row
filtered_rows asks the sheet for its filter row spans once instead of
checking every table for each hidden row.
* Paste over filtered rows leaves their validation rules alone
When one row is tiled over filtered rows, paste_validations no longer
clears or copies rules on the rows the filter hides.
* Filtered copy packs links and validation with the rows showing
slide_together now moves hyperlinks and validation rules with their rows, and a
filtered whole-row copy records the packed rows as its selection so Insert
Copied Cells inserts only the rows copied.
* Group validation paste options and format the new tests
* Pack a filtered copy in one pass over notes, merges, links and spills
slide_together finds each entry's area by search instead of scanning every map
once per area, so a filter leaving thousands of separate runs no longer costs
runs times map size on every copy.
---------
Co-authored-by: Richard <richard1912@users.noreply.github.com>
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
Co-authored-by: skylar <hi@skylar.cc>
Ctrl+Shift+Arrow searched from the selection's moving corner, so after
Ctrl+Shift+Right from A2 the next Ctrl+Shift+Down searched the far column
and ran to the last row. As in Excel, it now searches the active cell's
column (Up/Down) or row (Left/Right) from the edge being moved, and moves
only that edge. A diagonal move from command params keeps the old jump.
Co-Authored-By: Olivier <5681030+tutis@users.noreply.github.com>
* Paste: whole-column paste and validation without per-cell blowup
edit.paste of a whole-column or whole-row copy walked every cell of the
copied block (up to the whole sheet) and, for each one, re-cut every
validation rule and pushed a one-cell rule. Over a 2M-cell block that is
quadratic and the fuzz soak aborted on 34-68 GB allocations.
- Paste visits only cells that hold something in the source or the
destination; blank onto blank changes nothing (and with an operation
stays blank, as in Excel, instead of becoming 0).
- Validation pastes as ranges: the pasted rectangle is cut once out of
the destination's rules and each source rule comes along as one rule
over its translated parts (Skip Blanks or not, as Excel does).
- Whole columns and rows paste whole, so destination content further
down the columns is replaced, as in Excel.
- A paste that does not fit on the sheet is refused, as Excel does,
instead of pasting part of the block (whole columns below row 1, whole
rows right of column A, a whole column transposed, a block at XFD).
- Paste Link, the one paste that writes every cell, is capped at
1,048,576 cells; tiled validation at 100,000 ranges.
Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>
* Paste: visit destination cells once per paste, add link, transpose and tiling tests
Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>
* Paste: visit link-only cells so a cut keeps their hyperlink
* Paste validation: Skip Blanks keeps the destination rule under a blank source cell with no rule
* Paste validation: Skip Blanks collects clearing cuts only when a rule is under the paste, merges them into runs, and limits only generated areas
* Paste validation: annotate the clearing cut list
* Qualify paste validation context type
* Fix paste-special clippy warnings
* engine: batch validation range cuts
* Fix range type inference
* Annotate validation range index type
* Avoid shadowing test session helper
* Keep validation rows after the final cut
---------
Co-authored-by: Claude Sonnet 5.5 <noreply@anthropic.com>
* ft-121.7.9: apply Set precision as displayed in calculation (#1343)
With the option on, a formula result (and each element of a spill) is
rounded to its cell's number format before it is stored and before other
formulas read it. Numbers typed, pasted or reformatted while it is on are
rounded at once, and turning it on through formulas.calculationOptions
{precisionAsDisplayed} rounds every number constant, as Excel does.
The rounding is NumberFormat::round_as_displayed in the numfmt crate,
which shares the renderer's digit logic (fixed, scientific, fraction).
General, date/time, text, digitless and conditional formats keep the full
value, as observed in Excel through COM. Nothing changes when the flag is
off.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* ft-121.7.9: round conditional formats by the sign's section under precision as displayed (#1343)
Excel does round formats with a condition when "Set precision as
displayed" is on; the PR kept them at full value. Observed through COM
with synthetic values (and in gridcraft-corpus
excel/precision-displayed/pad-on-conditional-sections.xlsx): conditions
are ignored and the sign picks the section, the first for positives and
the second for negatives. `[<1]0.00;0` shows 2+1/3 as 2 but stores 2.33,
and stores -10/3 as -3.
Two more observed details: with a condition and a single number section,
negatives keep the full value (`[<1]0.00`), unless an `@` section follows
(`[<1]0.00;@` rounds them by the first section); and a completely empty
section passes to the next one (`0.0;;0.000` stores -2.333 as -2.333,
`;0.0` stores 2.333 as 2.3), for formats with or without a condition.
Display is unchanged.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* engine: recalculate spill anchors when a spill cell is reformatted under precision as displayed
round_edited_as_displayed only looked at stored-cell changes, but a spill
destination lives in Sheet::spill, so reformatting it (or its row or column) left
the anchor out of the changed set and the element unrounded. Add each spill anchor
whose range holds a changed cell or a changed row/column style to the changed set.
Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>
* numfmt: drop a cast the fraction merge made redundant
* precision as displayed: keep locked constants on protected sheets, round new sheets, fix manual-mode comment
* precision as displayed: name the input sheet in the new-sheet histogram test
* precision as displayed: use six values in the new-sheet histogram test
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* UI: a dialog's reference boxes belong to the sheet it was opened on, recorded when it opens rather than at the first pick
* UI: a click on the cell already selected writes it into the reference box being picked into
* Solver: references split into areas only at commas outside quoted sheet names, through one splitter shared with the reference boxes
* Solver: a constraint splits at its relation only outside quoted sheet names, in constraint text and in a model loaded from cells
* Solver: Save Model counts a constraint's areas outside quoted sheet names, and reads a number on the right side as one value whatever its separators
* UI: a Ctrl+click that follows a link is no pick of the cell already selected
The press on the grid tells the reference box being picked into that a
cell was selected only in the branches that select: Shift+click, Ctrl+click
that adds a cell, and a plain click. A Ctrl+click on a link's text follows
the link and selects nothing, so a link back to the selected cell no longer
replaces the box's text.
* UI: while a reference box picks, a second quick click on a cell picks it
A click on the same cell within the double-click interval started editing
the cell and skipped the pick, also when the earlier click came before the
box was clicked into. While a reference box is the one grid selections
fill, the double-click handling is skipped and the click picks.
* Docs: reference boxes take a second quick click as a pick; a followed link is none
* UI: while a reference box picks, a click on a link or checkbox picks its cell
A link was followed (Go To moved the selection into the box, and a web
link's question replaced the dialog) and a checkbox was toggled. While a
reference box is the one grid selections fill, a click only picks the cell
clicked, with or without Ctrl. The test of the Ctrl+click on a link back to
the selected cell becomes part of a test of links on the same sheet, a web
link and a checkbox.
* Charts: draw every doughnut series as a ring (#1827)
* Charts: submit doughnut hole size and first slice angle when the drag ends (#1827)
---------
Co-authored-by: alosslessdev <alosslessdev@users.noreply.github.com>
Conflicts:
- crates/xlsx/src/read.rs: main's names.unique() kept with this branch's
(sheet, read_controls) result from read_sheet.
- crates/ui-egui/tests/it/keytips_generated.rs: regenerated with
cargo xtask keytips from the merged keytips.json (413 sequences).
- docs/file-format-parity.md, docs/ui-parity.md: header and revision
history keep main's entries and this branch's form-controls entries.
The 10,000-character header spec was bounded, but each &A, &F or &Z
added the whole sheet name or path again, and a JSON workbook's sheet
name has no length limit. A field that would take a section past
64 KiB is now left out.
Every source record scanned the filter's whole selection, so a large
selection multiplied by many records was slow even when nothing passed.
Each filter's labels are lowercased into a set once per computation.
wrap_lines split an over-long word by re-measuring and copying the
rest of the word for every piece it cut, and only checked its line
limit once the word was done, so one long word in a narrow text box
cost word length x pieces. Each new word also re-measured the whole
line built so far.
Line and piece widths are now running sums of glyph widths (the same
sum text_width makes), so every character is measured once, and the
line limit is checked while a word is being split. The lines produced
are unchanged; a test compares them with the old wrapper.
The single-cell AutoSum guess stepped over one blank cell when a number sat
above it, so a second block of numbers below a gap was summed together with
the first block. It now stops at the first non-number, as Excel does.
Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>
Upstream folded cmd/insert/*.rs back into insert.rs, so the merge left
the policy check in a file that is no longer compiled. Restore that file
to upstream and apply the check in the live open_link.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Addresses review comment 4455670315:
- Clear Hyperlinks and Clear Comments removed links and notes on
locked cells of a protected sheet: protection compares stored cells
only, so their removal went unseen (for stored cells too, and now
for unstored ones since the whole range is cleared). `clear` now
refuses a locked cell's note or link with locked_cell_error, which
keeps Allow Edit Ranges and session-unlocked ranges.
- A removed note or link on a cell with nothing stored wasn't added
to the changed cells, so a recorded macro's footprint missed it.
Tests: engine tests::clearing_links_and_notes_respects_sheet_protection,
tests::clearing_links_and_notes_records_their_cells.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Addresses review comment 4455436875: `clear` clipped each range to the
sheet's used range (stored cells) before removing links and notes, so
a link from a file on an empty cell outside it was left in place, and
nothing was removed on a sheet with no cells. Notes and links are now
cleared over the whole range; cells and merges still only within the
used range.
Test: engine tests::clear_hyperlinks_removes_links_on_cells_with_nothing_stored.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Addresses CodeRabbit review on #3231, "Reparse consumed separators when a
field is not quoted": parse_tsv read "a<TAB>b"x as one quoted field,
then fell back to its raw text without the separator it had consumed,
so the cells "a, b"x and c pasted back as two. The new copy (which no
longer quotes a cell holding only a quote) makes that text. A field
whose closing quote doesn't end it, or that never closes, is now read
again as unquoted text, so its tabs and line breaks separate cells.
The text read again is bounded by the input's length, so hostile input
stays linear.
Test: a_field_that_is_not_really_quoted_keeps_its_separators.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
edit.find and edit.replace take within: selection, which searches only
the selected cells; Find Next then moves the active cell through them
and keeps the range selected, as Excel does. The Find and Replace
dialog uses it whenever more than one cell is selected (Excel searches
a selected range; one selected cell still means the whole sheet).
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Excel can hide the sheet tabs, the horizontal scroll bar and the
vertical scroll bar of a workbook window (File › Options › Advanced ›
Display options for this workbook), saved with the workbook. GridCraft
already read and wrote these settings (#3057) but always showed all
three, and had no command or option for them.
New commands view.showSheetTabs, view.showHorizontalScrollBar and
view.showVerticalScrollBar {on?} (toggling without `on`, undoable,
saved with the workbook), and a "Display options for this workbook"
section in File › Options. The tab bar follows them: without the tabs
the scroll bar takes the bar, without the scroll bar the tabs do, and
with neither the bar isn't shown; without the vertical scroll bar the
grid takes its width.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Addresses CodeRabbit review on #3226, "Skip hidden corner destinations"
and "Keep merged destinations inside the selected area": with column D
hidden, Ctrl+. on B2:D3 made D2 active; with B1:C1 merged and column C
selected, it made B1 active, outside the selection. A corner in a hidden
row or column, or one whose merged cell starts outside the selected
area, is now passed over like a locked corner on a protected sheet.
Test: next_corner_skips_hidden_corners_and_stays_inside_the_selected_area.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Addresses CodeRabbit review on #3226:
- "Check the next corner against protected-sheet selection rules": on a
sheet protected without Select Locked Cells, Ctrl+. could make a locked
corner active. It now goes on to the next corner it may select.
- "Keep the active cell at a merged cell's anchor": a corner inside a
merged cell made that cell active instead of the merge's top-left
cell. The corner now lands on the top-left cell, and corners in the
same merged cell are one stop.
Selection::next_corner_by takes where each corner leads (or None to skip
it); next_corner keeps its plain behaviour.
Tests: next_corner_skips_corners_the_sheet_protection_does_not_let_you_select,
next_corner_stops_once_on_a_merged_corner_at_its_top_left_cell.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Copy wrapped any cell that held a double quote in quotes (and doubled
its quotes), so copying `say "hi"` into another app gave
`"say ""hi"""`. Excel quotes only text with a tab or line break; a cell
with just quotes goes on the clipboard as it is.
Pasting text read a field that starts with a quote as quoted even when
its closing quote doesn't end the field, so `"hi" there` (which Excel
copies as it is) pasted as `hi there`. A field is now quoted only when
its closing quote is followed by a tab, a line end or the end of the
text; otherwise it is the text as written, as Excel pastes it.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Excel's Next Corner of Selection (Ctrl+., Control+. on a Mac) moves the
active cell clockwise to the next corner of the selected area (top-left,
top-right, bottom-right, bottom-left) and keeps the area selected; the
new active cell is also the anchor, so Shift+arrows then move the
opposite corner. GridCraft had no such command.
New command selection.nextCorner (Selection::next_corner) bound to
Ctrl+. on every platform. A one-row or one-column area goes end to end;
a single cell stays where it is.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Addresses CodeRabbit review on #3216, "Keep the selection on the sheet it
describes": moving Two!B1:B2 with Sheet1 active selected A1:A2 on
Sheet1, where nothing moved. The selection belongs to the active sheet,
so range.move now keeps it when the moved cells are on another sheet; a
move on the active sheet still selects the moved cells.
Test: drag_and_drop_on_another_sheet_stays_on_that_sheet (now also
checks the selection).
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Addresses CodeRabbit review on #3219, "Recognize the legacy Count
Numbers caption when the function changes": workbooks saved before
Count Numbers was captioned "Count of" carry "Count Numbers of Val"
(optionally with a number suffix). pivot.valueSettings now treats that
as an automatic caption of a Count Numbers field, so changing the
function renames it; a custom name stays.
Test: legacy_count_numbers_caption_follows_the_function.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Addresses CodeRabbit review on #3216:
- "Pass the resolved sheet to the paste step": a sheet-qualified move
(`Two!B1:B2` with Sheet1 active) was checked on Two but pasted on the
active sheet, replacing its data unasked. range.move now calls
paste_special with the range's sheet.
- "Check spilled values in the drop destination": cells showing a dynamic
array's spilled values hold no cell of their own, so the drop replaced
them without the prompt. They now count as data, as in Excel
(ISBLANK of a spill cell is FALSE, COUNTA counts it).
Tests: drag_and_drop_on_another_sheet_stays_on_that_sheet,
drag_and_drop_asks_before_replacing_spilled_values.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Show Values As › Rank Largest to Smallest counted every larger sibling,
so ties skipped ranks: 5, 4, 3, 3, 4 ranked 1, 2, 4, 4, 2 where Excel
gives 1, 2, 3, 3, 2. It now counts the distinct larger values.
A new Count Numbers value field was captioned "Count Numbers of Units";
Excel captions it "Count of Units", as GridCraft's XLSX reader already
names a value field saved without a name.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Dylan M. Taylor
vangel76andClaude Opus 5.5
Zinadin ZidanandOlivier
Harrison BoothandClaude Sonnet 5.5
Pranav
Francisco Herreraandalosslessdev
Higgs32584andClaude Opus 5.5
Brandon Thomas
Hector VillarrealandClaude Opus 5.5