From review: `text-align: left` beside `direction: rtl` (Left is absolute on the canvas); the REST import reads the four parallel paragraph arrays up to the paragraph count, not the 256-entry list limit; `rtl_para` gets an entry for the position after the last char so an empty last paragraph keeps its forced direction; the localization status line.
Co-Authored-By: Claude Fable 5.1 <noreply@anthropic.com>
Direction came from the letters only; Add right-to-left text says controls override it per paragraph (Text > Text direction, Left to right or Right to left). `TextDirection` on `ParaList`, `Bidi::of` with a base level per paragraph, `text.direction` and the three menu commands (the edited paragraphs while editing), `node.set textDirection`, the Type settings control once a right-to-left script is in the text, inspect `textDirection` / `lineDirections`, the CSS `direction`, and the `.fig` lines' `sourceDirectionality` in and out.
Co-Authored-By: Claude Fable 5.1 <noreply@anthropic.com>
REST import searched every style imported so far for each layer's style
reference; .fig export compared each text span's style with every distinct
style before it; Penpot token-set ordering searched the whole order array
for every comparison of the sort. Each now looks up a set, a map or a
position table built once.
* M8: an ellipse whose start has gone round many turns keeps its sweep in .fig
The importer clamped the starting and ending angles to ±1000 rad each
before taking the sweep, so an arc starting near or past 1000 rad lost
its sweep: a whole ellipse starting at 999 came back sweeping 1 rad, one
starting at 1500 swept nothing. The sweep is now the difference of the
angles as written, and a start past a turn is brought into [0, 2π) the
way the renderer's sine and cosine see it. The .fig export writes the
start within a turn too, where a 32-bit angle still holds it and the
sweep.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* M8: an arc far from zero keeps its sweep rather than closing into a whole ellipse
Review follow-up on #1891. The whole-turn tolerance grows with the
angles, so once a start can lie far from zero it swallowed real arcs: an
arc of 6.1 rad written at 1e6 rad read as a whole ellipse, and at 3e7 rad
even a sweep of nothing did. The tolerance now only applies while it is
at most 1e-3 rad (about 0.06°), which holds up to a start of about 4,000
rad; further out the sweep is kept as written.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* M8: an arc with no end stays whole however far out it starts
Review follow-up on #1891. With no endingAngle the importer took the end
as start + 2π and the sweep as the difference, which far from zero
rounds away from a turn: from a start of 1e15 it came out 6.25, drawn as
an arc with its radius edges now that the snap to a whole turn is
bounded. No end now means a sweep of exactly 2π.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
Co-authored-by: Brandon Thomas <echelon@gmail.com>
ParagraphStyle beside TextStyle in StyleKind::Text: style.create takes it from the layer or a value, style.apply sets it (the list on the paragraphs touched for a range), style.update moves it, editing it unlinks, .fig files keep it with the style; tests in styles_behaviour_tests and fig_export_assets_tests.
Co-Authored-By: Claude Fable 5.1 <noreply@anthropic.com>
Builds on #1618. Variables::get and Variables::collection take an exact id before a name; stored mode ids go through Collection::mode_by_id (expressions, the prototype's mode switch); font family variables and the colour picker, prototype editor and panels read stored ids exactly. Ported from fix/stored-ids-exact.
A colour variable's value in a mode can now be {"alpha": {"variable", "opacity"}} - that
variable's colour with its alpha replaced - or {"mix": {"from", "to", "t"}}, a per-channel blend
of two colour variables or literals over the stored values (in the document's colour profile),
alpha included. Calculations resolve lazily like aliases, so bound layers, mode switches,
instances and undo follow their sources; they compose, and a loop, or a calculation that reads
more than 32 variables in its collection's modes (other collections in their default modes), is
refused when it is set. Operands are stored by id and read by exact id, as stored references
are. Files keep them; REST, CSS, Penpot and .fig exports write the colour they show in each mode;
deleting a source leaves its readers on the colour they showed; library import and swap
re-point their operands. The Variables panel shows them with their formula and can swap one for
an alias or detach it to its colour.
Properties were listed by name, so a rename moved one. Components now keep prop_order (the names as they were made; a rename keeps the place) and every listing follows it. Make slot opens a name field under the frame's Slot row; Enter makes the slot, Escape cancels, a taken name keeps the field open.
* M6: .fig import keeps the file's saved line breaks while the text and its box are unedited (#1236)
The line breaker already keeps trailing spaces and the last glyph's letter spacing out of the fit test and doesn't round box widths; imported text wrapped a word early or mid-word because local fonts measure slightly differently from the file's. The import keeps the saved line starts (derivedTextData) on the text with the box width and a stable key of its layout content; layout follows them while both match and no line overflows its box by more than 3% (+1 px).
* M6: local check that imported text wraps at the line breaks its file saved (#1236)
Runs only when FIGCRAFT_FIG_SAMPLES names a folder of .fig files: each fixed-width text with saved breaks wraps there once imported, or falls back by the overflow slack; prints the counts.
Retain regional paint stacks and coordinate frames through simplify, offset, flatten, bucket normalization and Shape Builder. Preserve legacy fill semantics and synchronize importer warning catalogs. Verified with cargo xtask ci on Windows and Ubuntu/WSL, native UI screenshots, and CLI round-trip/export checks.
- The last line shown runs on into the word wrapped after it, so the ellipsis
fills the line ("Lorem consec…") instead of following the last whole word.
- An explicit height (node.set, transform.resize, a resize handle, fixed
sizing) on truncating text keeps it truncating (TextData::fix_size).
- Max lines on auto-height text hugs up to that many lines and ends in an
ellipsis; text.maxLines keeps auto height, Type settings show it as
truncating, .fig export writes textTruncation and import keeps auto height.
- node.get reports maxLines; text.fit measures every line.
Co-authored-by: Cursor <cursoragent@cursor.com>
Conflicts resolved keeping both sides: `.sketch` stays in `is_document`
(now via `OsStr::to_str`); ROADMAP and the parity, roadmap and
file-format docs keep main's headers and rows with the `.sketch` notes
and history rows added.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
From the Figma forum request "Set overlay position relative to element,
not to page": an open overlay action takes anchor: screen (default) |
triggerInside | triggerOutside. With a trigger anchor the position preset
is measured on the layer that opens the overlay instead of the screen.
Outside puts top presets above it and bottom presets below it with the
edges lined up (a dropdown is Bottom left + Outside); Center centres it
on that layer. Manual is unchanged.
The interaction editor gets Relative to (Whole screen / Trigger layer)
and Inside / Outside. The player, the command (and so MCP and the
control channel) carry it; the command's params doc lists it. Figma has
no such setting, so .fig export writes it as a manual offset. Old files
and JSON without anchor read as screen and write unchanged.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
color_alpha is the part of a solid paint's opacity that is its typed colour's alpha, not a flag:
binding a colour variable takes only that part out, unbinding puts the variable's alpha back in,
and REST import records it. A 50% paint bound to a 50% variable stays at 25% bound or not.
Sketch keys a font's variation axes by the tag read as a number; they map
onto the text style's variations (a fontVariations key in the REST
mapping). Font references without font data only name the fonts a
document uses and no longer raise the embedded-font note.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
.sketch archives (document.json, meta.json, pages/*.json) open through
file.open, file.import, drag and drop, the CLI and MCP; files saved by a
Sketch older than 48 are refused with a message saying how to convert
them. Layers come in the next commits.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
A design-system .fig file (54 pages) stopped at 244 248 layers, the rest
of its pages skipped, and most of its instances came in as frames "of
components that aren't in the file", with the cap note shown twice.
- The layer budget follows the compressed canvas at 8 bytes a layer, not
32: design systems are mostly instances, which pack tightly. Files under
about 1.6 MB keep the 200 000 floor and the 2 million ceiling stays
(measured on synthetic files: about 5.4 KB and 19 µs a layer).
- The library copies the pages use (the file's hidden internal canvas) are
mapped before the pages: at the cap the pages' last layers are skipped,
not the mains their instances link to. The REST stage keeps building
pages first (its ids are first-wins) and allows for the wrapper frame of
each library copy, the one layer the mapper doesn't count; that layer
tripped the REST stage's own cap and repeated the note.
- Instances and swap defaults whose main is in the file but past the cap
say so instead of "aren't in the file" (en and es catalogs).
- The .fig import gives a note the mapper already gave only once.
Tests in fig/layer_cap_tests.rs: the budget for a #981-sized canvas, library
mains ahead of the pages at the cap, the note for a capped local main, and
a whole 210 000-layer file with one cap note and its library links kept.
All four fail on the previous code.
A .fig import's notes were deduplicated and left uncounted, so each kind
was named once with no sign of how much of the file it applied to: a
file whose every text layer lost a setting read exactly like one where a
single layer did. That is what made the loss in #467 invisible -- the
reporter saw one line while three kinds of data went, one of them on all
83 text layers.
The mapper now collects its notes through the same `Warnings` the REST
importer already uses, which keeps the first-seen order and the cap and
appends `(×n)` where a note was met more than once. Nothing else
changes: the note text stays the catalog key it was, and the import
report already reads a `(×n)` suffix off before translating the base
(`ui-egui`'s `note_text`), so a counted note is still translated.
`figcraft-cli info` prints these notes, so it now names each kind with
its count.
With the count dropped again, the test reports the two notes plain:
["connector layers import as static frame/vector snapshots ...",
"connector label was skipped: depth limit prevents nested ..."]
Part of #467.
gridColumnsSizing and gridRowsSizing are CSS grid-template strings: px
tracks are fixed, fr tracks fill, auto/min-content/max-content hug,
minmax(_, Nfr) fills and repeat(n, ...) expands; other tracks stay equal
(1fr). Tracks past the axis's own count are left out. Files from .fig
keep reading the tracks from their source.
An auto layout frame a .fig records no primary-axis sizing for hugs on
that axis (auto layout sized it by its content before that axis could be
fixed) instead of turning fixed; an instance that records no auto layout
takes its main's; REST frames whose sizing modes are left out hug (the
documented default); text hugs by its resize mode (auto width both axes,
auto height its height) instead of coming in fixed.
A layer inside an instance can now override its resizing (hug, fill or
fixed, with min and max sizes; override group `resizing`) and its size.
They were refused, and imported ones were dropped at the first relayout.
Kept through rebuilds, undo, save, .fig and REST import, .fig export and
detach; reset per group and with Reset all changes. Position, constraints
and absolute or grid placement stay the main's.
BFlat
Trevor BrownandClaude Fable 5.1
Dylan M. Taylor
Christopher Linnett
Skyfuller1303
aiongg
Muamer MustaficandCursor
Jindřich ŠaršonandClaude Opus 5.5
JimKnoxxandClaude Opus 5.5
Ridzzz0Alam
Hamza
NetterSilverandClaude Haiku 5.5