Third Figma run (web app, 2026-11-12): the mean gap rounds half up (X 0, 60, 135, 215 gives 0, 72, 144, 216; 0, 60, 135 gives 0, 68, 136); a tie between repeated gaps takes the smaller; a row is one row group of layers and may overlap along X, a negative gap counting in the mean (X 0, 60, 105, 170 gives 0, 57, 114, 171); a grid is packed along the axis with more groups (2 x 3 by centred columns, 3 x 2 by centred rows); a diagonal, an irregular layout and layers that all overlap are unavailable. The earlier cell rule is removed.
Choices, not measured: a 2 x 2 grid as columns, auto layout flow children unavailable, the 2,000 layer cap, rotated layers by their box, spacing with two layers, no rounding with Snap to pixel grid off. Grid positions along a stack can differ by a pixel from Figma's (it read 52 and 51 for the same mean 51.67).
Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>
Model-Effort: Opus 5.5 drove; Fable 5.2 briefed; Sonnet 5.5 measured and wrote at medium
Measured in Figma's web app on 2026-11-12 (top-level rectangles): a row, a column and a 2 x 3 grid of unequal sizes, eight runs on the gap, and the cases where Tidy up is greyed out (fewer than three layers, overlapping layers). Figma keeps the order, the sizes and the first layer, evens one gap per axis (the most common existing gap, else the mean taken down to a whole number) and tidies a grid by columns.
Choices, not measured: the smaller of two equally common gaps, a mean ending in .5 going down, gaps a pixel apart differing, a diagonal being a row, a grid with an empty place, a grid always read by columns, one overlapping pair making it unavailable, auto layout flow children making it unavailable, the 2,000 layer cap, rotated layers by their box, spacing with two layers, and no rounding with Snap to pixel grid off. A selection that is none of a row, a column or a grid keeps the earlier rule unchanged.
The Design panel's Tidy up row is greyed out with a tip when unavailable; the command then moves nothing and adds no undo step.
Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>
Model-Effort: Opus 5.5 drove; Fable 5.2 briefed; Sonnet 5.5 measured and wrote at medium
inspect.code wrote one `background` per visible fill, so only the last survived. A non-text layer now gets one `background` with every visible fill as a layer, top fill first (a document's fills run bottom to top), joined with ", ". A solid above another fill is `linear-gradient(0deg, c, c)` since CSS allows a plain colour only as the last layer; the bottom solid stays a plain colour (and keeps its variable token); gradients, images and patterns keep their layers. A single fill is unchanged. Text keeps one `color` per fill. Tailwind emits a layered value as one `[background:...]` class. Native targets are unchanged.
Tests: several_fills_are_one_layered_background_top_first, one_solid_fill_stays_a_plain_colour, several_fills_are_one_layered_background_class.
Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>
Model-Effort: Opus 5.5 drove; Fable 5.2 queued; Opus 5.5 briefed; Sonnet 5.5 measured and wrote at medium
Measured in Figma's web app on 2026-11-12: a double-click on a layer's icon in the Layers panel zooms the canvas to the layer and starts no rename; a double-click on the name renames. The row now checks whether the double-click fell within the rect it paints the icon in, and if so selects the layer and runs view.zoomSelection. A double-click elsewhere on the row is unchanged.
Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>
Model-Effort: Opus 5.5 drove; Fable 5.2 queued; Sonnet 5.5 measured and wrote at medium
A selected polygon or star shows a Count handle on its first point clockwise from the top (a polygon's vertex 1, a star's outer point 1, not inset). Dragging it sets the count to round(360 / the pointer's clockwise angle from the top point about the centre), measured in the shape's own frame and clamped to 3 to 60, written through node.set pointCount in one undo step. The readout and hover label read "Count N". Measured in Figma's web app on 2026-11-12; a polygon's maximum wasn't read, so it is clamped at 60 like the star's.
Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>
Model-Effort: Opus 5.5 drove; Fable 5.2 queued; Opus 5.5 briefed; Sonnet 5.5 measured and wrote at medium
Gap 1's 2026-10-26 bullet still said the export drops region fills.
tail_tests asserted on "region paints", which the narrowed warning can
never contain; it now checks for any region warning.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Model-Effort: Opus 5.5 drove and fixed; Fable 5.2 reviewed
Each vector region with paints of its own (an empty list included) now names an entry of the network's style table, so the paints come back on import; equal lists share one entry and a region without paints writes style 0. Only the paint frame of a region, which the importer cannot read, still warns.
Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>
Model-Effort: Opus 5.5 drove; Fable 5.2 briefed; Sonnet 5.5 wrote at medium
An image paint's adjustments (exposure, contrast, saturation, temperature, tint, highlights, shadows) were dropped on export with a warning, although the importer already reads them. The export now writes them as the paint's `paintFilter`: seven floats, with saturation as vibrance and the tint's sign flipped to the file's (positive towards magenta). A paint without adjustments gets no `paintFilter`. The warning is gone.
The schema gains `PaintFilterMessage` and `Paint.paintFilter`. A round-trip test turns the importer's fixture around and pins the written values and field numbers. Not checked in other software.
Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>
Model-Effort: Opus 5.5 drove; Fable 5.2 briefed; Sonnet 5.5 wrote at medium
Measured in Figma's web app on 2026-11-12: with one child of an auto layout frame selected, the Design panel's Align buttons are greyed out, Alt+A and Alt+S do nothing and the frame's alignment doesn't change. align_target now returns none for a single layer that takes part in its auto layout frame's flow, so can_align is false and the align commands leave the layout alone. An absolutely positioned child still aligns to its frame, and multi-layer selections are unchanged (neither measured).
The panel's disabled tip says why ("A layer in an auto layout frame is placed by its frame"), through the new align_blocked_by_auto_layout. Tidy up was measured to differ from Figma and is not changed here.
Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>
Model-Effort: Opus 5.5 drove; Fable 5.2 queued; Opus 5.5 briefed; Sonnet 5.5 measured and wrote at medium
The engine test now follows the issue: a list typed at 5, saved as .fig and opened, split by Backspace at the start of "b". The REST fixture is a top-level list, the junk sweep reaches the new loop through a listed text layer, and the document crate tests the new rule for nested, bullet, plain and over-deep levels. ParaList gets its doc comment back, and the revision row names the item written with 0.
Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>
Model-Effort: Opus 5.5 drove; Fable 5.2 queued; Opus 5.5 briefed; Sonnet 5.5 wrote at medium
Figma writes a list's start on every line of the list (measured in Figma's web app, 2026-11-12, from a saved .fig: a list started at 5 has listStartOffset 4 on all its lines, and the item split off by Backspace is written with 0). The import kept every line's value, so after a split the items after it restarted at the old start instead of 1.
The import now keeps a start only on the item where a numbered list starts counting, and gives every item that goes on counting 0, for .fig and REST listStartOffsets alike. The rule is one function in the document model, list_item_starts_counting, which the layout's list numbering now uses too. The export is unchanged and its re-import now equals what went in.
Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>
Model-Effort: Opus 5.5 drove; Fable 5.2 queued; Opus 5.5 briefed; Sonnet 5.5 wrote at medium
A native shape frame now writes fixed sizing on both axes, as a shape made here has, so the first edit no longer shrinks it to hug its text. A shape whose generated text is blank while the outer layer still carries text keeps the generated layers (#1397). The kind name in the no-outline note is clipped, the docs rows match the code, and the new key sits in order.
Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>
Model-Effort: Opus 5.5 drove; Fable 5.1 briefed; Sonnet 5.5 wrote at medium
On a whiteboard, a FigJam shape with text whose generated records are complete becomes a native board shape for the 23 kinds FigCraft draws: an empty centred frame holding FigCraft's own outline (the file's paints, weight and dashes kept) and the text. The 7 kinds without an outline, and shapes with damaged records, keep the generated layers; the former warn with the kind's name. Stickies and shapes share one native-board hook in the layer mapper.
Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>
Model-Effort: Opus 5.5 drove; Fable 5.1 briefed; Sonnet 5.5 wrote at medium
The context menu's Select layer now lists locked layers (and what a locked frame holds) with a padlock in the leading column, and picking one selects it, as the help center's "Lock and unlock layers" says and as measured in Figma's web app, 2026-11-10. The submenu shows only with more than one layer under the pointer (measured on a single locked layer only, the least certain rule). Clicks, hover and marquee still never reach a locked layer.
- doc: geometry::HitOpts { locked } and layers_at_opts; layers_at and the other public hit functions keep their signatures and pass the default.
- engine: select.layersAt lists locked layers and its rows gain locked (the layer or an ancestor is locked).
- ui-egui: indented_item takes locked and paints the Layers panel's padlock icon; a row both selected and locked shows the check.
- docs: ui-parity Select layer row, revision row and status line; mcp.md select.layersAt.
Tests: layers_at_a_point_list_locked_layers_with_a_flag_and_select_set_takes_them, select_layer_marks_locked_layers_with_a_padlock_and_picks_them, select_layer_needs_more_than_one_layer_under_the_pointer.
Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>
Model-Effort: Opus 5.5 drove; Fable 5.1 briefed; Sonnet 5.5 wrote at medium
The popover's 24 pt close button painted its cross through rect.shrink(6.0), a 12 pt glyph; it now goes through icon_glyph_rect like the other 24 pt buttons, with a painted-size test that failed before the change. The style picker's menu_icon picked the 16 pt glyph with an exact size equality, so a button at a fractional x that measured a hair off 24 in f32 painted at 14 pt; it now allows 0.5 pt of rounding.
Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>
Model-Effort: Opus 5.5 drove; Opus 5.5 briefed; Sonnet 5.5 wrote at medium
Measured in FigJam's web app on 2026-11-12: a sticky's own toolbar has a text-size menu (Small 16, Medium 24, Large 40, Extra large 64, Huge 96), a fresh sticky is Small = 16 (the 18 of 2026-11-09 did not reproduce), the note grows taller at Huge and shrinks back, a size chosen with two stickies selected sets both, and the sticky tool remembers the last size.
STICKY_TEXT_SIZE is 16 and STICKY_SIZES holds the table. board.setStyle {fontSize} sizes stickies' notes and sets the sticky tool's size (BoardTool.sticky_size); board.sticky takes the tool's size or a fontSize (1 to 1000). The contextual bar shows a size menu (the current name or number, a check on the current entry) when only stickies carry text; shapes keep S/M/L/XL. Docs: boards-parity rows, revision history and status line.
Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>
Model-Effort: Opus 5.5 drove; Opus 5.5 briefed; Sonnet 5.5 wrote at medium
Move and resize modifiers were compared in Figma web on 2026-11-08: Shift locks a move to the dominant axis, Alt copies, Shift keeps the ratio and an edge scales about the opposite edge middle, Alt keeps the centre, Shift+Alt does both, and a modifier changed mid-drag is read fresh. FigCraft matches; Ctrl/Cmd was not measurable. The three ui-parity rows, a revision row and the status line record it, and target-app-parity no longer says modifiers are uncompared.
Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>
Model-Effort: Opus 5.5 drove; Opus 5.5 briefed; Sonnet 5.5 wrote at medium
The Layers panel's Minimize, search and add page buttons, the Assets back button, the Versions panel's row menus, the Dev Mode status button, the Prototype panel's flow buttons, the preview pane's bar buttons, Home's Online row menus and the style picker's 24 pt buttons painted their glyphs through shrink(5.0), 14 pt. They go through widgets::icon_glyph_rect like the Design panel's (#2229), 16 pt.
Left as they were: the style picker's 22 pt edit/check button and 20 pt variable button, and the popover's close button (24 pt, deliberate 12 pt cross).
Tests: icon_button_size_tests (Layers and Assets, the status button) and icon_size_tests beside versions, proto_panel, online, the style picker and the player; header_icon_size_tests gains painted_rects and paints_icon_at_button_size for them.
Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>
Model-Effort: Opus 5.5 drove; Opus 5.5 briefed; Sonnet 5.5 wrote at medium