* frames: keep cached frames an edit can't reach
Nudging, trimming or splitting a layer re-rendered the whole comp. The RAM
preview now carries every frame whose stack of active layers is unchanged
to the new comp identity; only the segments an edit touches re-render.
* disk cache: never drop frame writes; save frames kept after edits
Frames get their own write lane (bounded by bytes, written before layer
buffers), so a burst of layer writes no longer drops frames and leaves gaps
in the blue bar after reopening. Frames an edit kept in RAM are written to
disk under the comp's new content key when idle.
* frames: music and hidden layers keep the caches
Layers that can't change pixels (audio-only footage, AV layers with Video
off, when nothing reads them and there are no expressions) no longer count
for the RAM preview's dirty segments or the disk cache's comp and footage
keys. Adding, trimming or moving music keeps both caches.
RENDER_VERSION bumps to effectcraft-render-3 for the new key formula.
* ui-egui: background caching benchmark
cache_bench fills a comp's RAM preview the way idle caching does and
prints frames/s with decoder, footage-cache and disk-cache counters.
* frames: soloed music and hidden layers aren't silent
Solo hides every other layer, so soloing a music track or a layer with
Video off changes the picture. silent_layers no longer drops soloed
layers, so the RAM preview and the disk cache see Solo toggles.
* disk cache: audio files a layer reads stay in the layer salt
Audio-only footage left the disk layer salt so importing music keeps the
keys, but Audio Spectrum and Audio Waveform draw from an audio layer.
Footage another layer reads (or any, when a read layer is a precomp)
counts again, so overwriting that file doesn't reuse stale buffers.
* disk cache: retry frame writes the queue refused
put_frame reports whether the frame is on disk or queued. persist_missing
forgets the key of a refused write, so a full frame lane no longer leaves
RAM frames that are never written.
* ui-egui: cache_bench measures idle caching; checks --comp and --slots
Frames go through request_background with one slot per frame thread, as
Cache Frames When Idle does. An unknown --comp is an error (the active
comp is used only without --comp), --slots is at least 1, and the disk
report flushes queued writes instead of sleeping.
* disk cache: RENDER_VERSION effectcraft-render-6
This branch changes the cache-key formula (silent layers, Solo, read
audio in the footage salt), and upstream #2759 already took render-5
for the clip-clock change, so entries from either must not be reused.
* frames: rewrite RAM frames the disk cache evicted
persist_missing kept every disk key it ever queued, so a frame the disk
cache evicted later was never written back. The disk cache now tracks
frame writes still queued or in progress (frame_pending), and
persist_missing only remembers keys while it converts them.
* frames: idle passes continue while RAM frames wait for disk
persist_missing reports whether there may be more to write (a content key
being computed, frames being converted). Cache Frames When Idle then
schedules another pass, so a refused write is retried without waiting for
a UI event, and the passes stop once every frame is on disk or queued.
* frames: rewrite an evicted frame once, not on every idle pass
A disk cache smaller than the RAM preview, or a frame too large for it,
made idle passes write, evict and rewrite the same frames every 500 ms.
Each disk key is now written at most twice under one disk limit (the
write and one rewrite after an eviction); a new limit resets the count.
The persist test waits for the conversion to forget its keys before
checking that no work is left.
* frames: the work area doesn't change pixels
Setting the work area (B, N) cleared every cached frame, in RAM and on
disk: it was compared with the comp's pixel settings and hashed into the
disk key. It is a preview and render range only, like the Resolution, so
it no longer counts.
* frames: audio edits keep frames unless something draws the audio
Changing a clip's Audio Levels, its audio effects or its Audio switch
cleared the clip's cached frames, and the comp's disk cache, although
nothing drew that audio. The audio now counts only for the layers whose
audio is heard (Project::heard_layers): those a layer picks in an effect
(an Audio Waveform or Spectrum, even on itself), the layers of a picked
precomp, and every layer while an expression (which can read Audio
Levels) exists. Music in a precomp that a waveform in the outer comp
picks is no longer treated as silent either.
* frames: an expression only reaches the frames of its own layer
One expression anywhere in the project made every edit clear the
comp's whole cache, and so did editing a layer another layer reads
(its parent, matte, or a layer it picks). Expressions can read
anything, but they only draw in their own layer: an edit now re-renders
the frames where it changed something, plus those of the layers with an
expression and of the layers that read a reached layer. With
expressions, an edit elsewhere (another comp, an item's name, a marker,
music) reaches only the expression layers' frames.
* frames: an edit inside a precomp re-renders only where the precomp shows it
Editing anything inside a precomp cleared every cached frame of the
comps that nest it, even a music level in it. Project::dirty_spans now
follows precomps: it takes the spans their comp changed in, shifts and
scales them by the precomp layer's start and stretch (its whole span
under a time remap or Responsive Design timing), and keeps the outer
comp's other frames. Layers that read a changed precomp (a matte, a
waveform) re-render where they are active.
* disk cache: keep the frames an edit can't reach
The disk cache keys frames on a hash of the whole comp, so every edit
lost the frames that were only on disk (the blue bar), even a rename;
only those still in RAM were written again under the new key. When an
edit keeps RAM frames, it now also queues a disk carry: on the frame
pool, each kept frame of every disk series in use for that comp is hard
linked (or copied) to its new key with DiskCache::link_frame, oldest
edit first. The old entries stay, so undo finds them too.
* frames: a keyframe edit re-renders only around the keys it changed
Changing one keyframe (its value, interpolation or ease, in the
Timeline or the Graph Editor) re-rendered the layer's whole length, so
a key on a full-length layer cleared the whole cache. A layer that
differs only in keyframes of its Transform properties now re-renders
from two keys before the first changed key to two after the last
(auto-Bezier and continuous tangents reach the neighbouring segments),
to its in or out point past the first or last key. Static values,
expressions, roving keys, time remap and time effects still reach the
whole layer; effect keyframes do too for now (simulations and time
effects read other frames).
* frames: music volume keeps frames while no expression reads audio
Any expression in the project (a wiggle on another layer, even a
disabled one) made every layer's audio count as read, so changing a
music layer's Audio Levels re-rendered every expression layer and
changed the comp's disk key. Audio now counts for expressions only when
one may read it (Heard::audio_exprs): its text names audio or walks
properties by index. An audio-only change nothing reads no longer counts
as a change elsewhere in dirty_spans either.
* frames: a keyframe edit with few keys or beside a self-contained expression keeps the other frames
Changing a Scale key of a layer with two or three keys re-rendered the
layer's whole length: with fewer than two keys before (or after) the
changed one, the span fell back to the in (or out) point instead of the
first (or last) key, past which the value holds. And any layer with an
expression re-rendered on every edit, so a wiggle on a full-length layer
cleared the whole cache. An expression layer is now reached by edits
elsewhere only when its text may read outside its layer (it names a
comp, layer, footage, the project or its source); its parent and the
layers it picks are still read through referenced_layers.
* viewer: the caching chip stays up between uncached frames, with a spinner
The "Caching frames…" chip showed only while playback waited for a
frame, so during caching it flickered on and off with every frame that
arrived. It now stays up 0.6 s after the last wait (and hides at once
when playback stops). It is also smaller and quieter: a spinner, then
"Caching frames" without the ellipsis in dimmed smaller text, on a
fainter chip sized to its text.
* preview: the Preview panel's cache bar counts the preview's Resolution
With a preview Resolution set (Half, Third…), the frames a preview
plays are cached at that scale, but the Preview panel's bar counted the
series the viewer shows. When playback stopped, the viewer went back to
the comp's Resolution and the bar dropped from full to the frames cached
there. It now counts the preview's own series (Auto still follows the
viewer). The viewer and the Timeline's cache bar are unchanged.
* Contributors: add nazar-gavrylyk's name
* frames: an expression reading its own layer's markers or audio re-renders that layer
With expressions in the project, a layer's markers count when comparing it, and its audio counts
when an expression may read audio, so a marker or volume edit re-renders the edited layer over
its own span. Comp markers still count only through layers whose expressions name thisComp.
* frames: a keyframe edit on a layer with an expression re-renders the layer
An expression on the keyed layer can read the keyed property at other times (Rotation reading
Position with valueAtTime), so the frames past the changed keys may change too.
* cache_bench: read decoder counters through effectcraft-media
Only crates/media, crates/export and crates/interchange may depend on the FilmCraft crates.
* cache_bench: clips end where the next one starts
* frames: write-back uses the worker's disk keys while a Roto Brush model is active
persist_missing keyed disk frames on FrameKey::opts, which also carries the Roto Brush model
stamp; the worker and disk_frames key on the render opts' hash alone. With a model active every
RAM frame looked missing, was written again under keys nobody reads, and recorded a second disk
series.
* frames: an edit two precomps down reaches the outer comp
A precomp layer whose comp Arc didn't change was skipped, but the comps nested in it may have
(an edit in Inner leaves Mid's Arc as it was), so Outer kept every frame. Every nested comp is
walked now, each once per edit.
* cache_bench: stop when the disk cache can't be cleared
* frames: one disk carry job at a time
carry_disk runs on every timeline paint and idle pass, and spawned a pool job whenever carries
were queued; during a drag the extra jobs waited on the carry lock and held frame-pool threads
from the viewer. A scheduled flag keeps one job, which drains the queue in order until it's
empty.
* frames: a panicking disk carry is skipped, not left holding the job
The carry job clears carry_scheduled only on its normal exit; a panic in a carry would have left
it set for the session, so no later carry ran. Each carry is caught like the content key's
hashing, so the job always reaches its exit.
* frames: an expression reading its own in point or index re-renders its layer
A trim or rename kept the layer's frames outside the cut when the layer
drew the same apart from its span, but an expression on it can read its
own inPoint, outPoint or name (a fade from inPoint), so every frame of
the layer changes. Such a layer is no longer treated as only respanned.
An expression reading `index` reads the layers above it too: a layer
added or removed there shifts it, so `index` now counts as reading
outside the layer.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* frames: an edit of a comp reaches the expressions of the precomps it nests
An expression in a precomp can read the comp that nests it
(`comp("Main").layer("Controls")`), but the walk into nested comps only
counted changes outside the edited top comp. Editing a hidden Controls
layer there (or any layer, when the precomp is time-shifted or reads it
at other times) kept every precomp frame in RAM and linked them all on
disk under the new key. Nested comps now see an edit of the comp above
them as an edit elsewhere.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* frames: an edit in a precomp under a time effect reaches its whole layer
A precomp layer running Echo, Posterize Time, Time Displacement or
another effect that reads the layer at other times shows a nested change
far from where it maps, but only the mapped span (a nested frame either
side) re-rendered. Such a layer now gives its whole span, like a time
remap. `reads_other_frames` lists those effects (every `ec.time.` and
`ec.sim.` effect and the others that call `self_at`); keyframe spans use
it too.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* frames: a keyframe edit beside muted keys re-renders the whole layer
Muted keys are skipped when a property is evaluated, so the keys that
play around an edited key can be any distance away, but the span counted
two stored keys either side. A segment from an earlier playing key kept
its stale frames. Muted keys now give the layer's whole span, like
roving keys.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* frames: one echo in the precomp time-effect test (three saturate alike), rustfmt
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: FredApps <153173854+FredApps@users.noreply.github.com>
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* G8: plug-in library
Community Plug-in Library for WebAssembly effect plug-ins (#376): one
reviewed catalog (index.json), install / update / remove from Settings >
Plug-in Library (also Effect > Plug-in Library...), library.* commands,
start-up loading of installed packages with SHA-256 checks. Downloads go
through the system curl (https, GitHub hosts), as trained models do.
Preview before installing (library.preview): the release is downloaded,
checked like an install, and rendered in the sandbox on a built-in sample
frame at default settings (2 s at 12 fps) with a Before/After split, plus
the effect's parameters, "Open on GitHub" and an optional author video
link (catalog field preview.video). Authors need to do nothing for it.
Hardening: a module that fails to load leaves the installed copy alone,
Update All updates every package in one job, minApp also applies to an
explicit version, curl ignores ~/.curlrc and URL globbing, unique temp
files, percent-decoded file URLs. Plug-in effect slots grow from 64 to
256 with a clearer overflow error.
Docs: plugins.md "Plug-in Library", publishing-plugins.md (author guide
from zero to listed), gaps.md; examples/plugin-catalog is the starting
content of the catalog repository (schema, validation workflow).
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* contributors: credit iseemhlyfta
* G8: plug-in library: doc comments on the library's functions
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* G8: plug-in catalog check: require one object with schema 1 and a packages array
An empty file or several JSON values passed jq empty, and with
SKIP_SCHEMA=1 nothing else checked the catalog's shape.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* G8: plug-in library: one preview texture set; catalog schema requires effects
The preview kept a texture set per package version previewed (about
6 MB each) for the whole session; it now keeps one, replaced when
another package is previewed. Releases in the catalog schema must list
at least one effect id, as the author guide says.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* G8: plug-in catalog schema: effect ids follow the manifest's id rules
Letters, digits, '.', '_' and '-', and not the reserved 'ec.' prefix,
so library.missing can match them.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* G8: refuse Plug-in Library jobs while automation file access is confined
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* G8: split the Plug-in Library page into toolbar, card, links and actions
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* G8: show Plug-in Library toasts without a Roto job; cache preview frame checks
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* G8: log Plug-in Library packages that fail to load at start-up
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* G8: check an update before replacing a loaded package; Update All past failures
- An update to a package that is already loaded is now compiled and its manifest checked
(through the previewer, without registering it) before the new file is written and the old
version's folder deleted. Before, a release with the right SHA-256 that didn't load replaced
the working version and failed at the next start.
- Package ids that differ only in case, or end in a dot, would share one folder on Windows and
macOS: the catalog keeps the first of them, and ids can't end in a dot (schema too).
- Update All: a package that can't be picked or installed no longer stops the others; the
result names what was updated and what wasn't.
- Downloads: at most 5 redirects, and one that ends off GitHub's hosts is refused, as the module
docs say.
- A job that panics no longer leaves the library busy; poisoned status locks are used, not
dropped.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* G8: rustfmt the update test
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
Co-authored-by: FredApps <153173854+FredApps@users.noreply.github.com>
In sandboxed iframes without allow-same-origin (or other opaque origin contexts), accessing `navigator.serviceWorker` throws a SecurityError synchronously.
- Guard `info().serviceWorker` evaluation with try/catch to return `false` on SecurityError (#1585)
- Guard PWA serviceWorker registration with try/catch to let the web app load rather than hanging (#1582)
- Add contributor credit entry for @krinry in `contributors/people.toml`
Credit myself by the display name I chose, nanox333. The name shows in the About window once
contributors.json marks the entry as verified.
Co-Authored-By: Claude Haiku 5.5 <noreply@anthropic.com>
Keep every entry in contributors/people.toml, and translate the new menu
item (Copy Frame to Clipboard) and the five gradient-editor strings into
Czech.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Ported onto the current language plumbing next to Ukrainian (catalog
codes, Match System, native menu Services label, docs, tests), and the
stale Ease Presets row (a ScriptUI panel since #404) dropped.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01QiAJeFttZp83Fh7YuzAR5f
Add a Spanish catalog for the menus (618 entries), the computed titles and the macOS Services label, and list Español in the Language preference. Match System now maps es, es-ES, es_MX and es-419 to it. Add llopjulen to contributors/people.toml.
Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01HcDWLRR3UfieXAyFa9cq4p
Valentin KleinandClaude Sonnet 5.5
JonRC
Brandon Thomas
adikshan11andClaude Opus 5.5
aiongg
marshiyar
Dylan M. Taylor
bflatasticandClaude Opus 5.5
Krueels
Tomasz LewandowskiandClaude Opus 5.5
ashokram-si
Shuvra Basak
Camille Moine
NetterSilverandClaude Haiku 5.5
krinry
Marco Arnulfo
arnav-hiwarkarandClaude Opus 5.5
Moein Saharkhiz
Kristian Myram
dotCooCoo
Moein Saharkhiz
RealtaNua
LosminekandClaude Opus 5.5
webdevtodayjason
Vikram Bhaskaran
Aavirash
tylerjenningsw
llopjulenandClaude Sonnet 5.5