The 0.11.0 macOS release job failed after notarization with 'resvg not found': the shared
release workflow never installed it, and it was only present before via a warm cargo cache.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Quit EffectCraft and Finder's Quit send `ViewportCommand::Close`, and
the close button sends the window's close request. In each case eframe
drops the window while AppKit's run loop is still running. On a Mac
with a Touch Bar, AppKit's Touch Bar code then raises an uncaught
Objective-C exception (`-[_NSTouchBarFinderObservation invalidate]`)
and the app crashes (storytold/craft-libs#3).
After the unsaved-changes check, `close_or_quit` calls
`craft_quit::on_close_request` from craft-libs, pinned to the rev that
craft-docpath already uses. When nothing holds the window open, it
cancels the close and quits through `-[NSApplication terminate:]`,
which still runs `on_exit` (window position, workspace, crash-recovery
cleanup). The prompt for a modified project still holds the window.
The window close after a lost graphics device takes the same route.
On other platforms it does nothing. pdfcraft adds craft-quit the same
way (storytold/pdfcraft#1533).
A quit while the window is minimized or hidden still closes the window
as before: eframe does not run `ui` then, and the unsaved-changes check
and the new call both run from `ui`.
`terminate:` ends the process before `eframe::run_native` returns, so
the log line for the closing window moves from `main` into `on_exit`.
clippy's allow-unwrap-in-tests only recognises #[cfg(test)], not cfg(all(test, ...)),
so cargo xtask ci failed on main.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
rfd's Linux backend goes through the XDG desktop portal, and a blocking
`rfd::FileDialog` leaves the main thread waiting on the portal's answer
without pumping winit's events: while the Open dialog is up the window stops
answering the compositor, which offers to force-quit the app ("EffectCraft is
not responding"), until a file is picked.
The non-blocking host hook for the commands' dialogs (`rfd::AsyncFileDialog`
on a worker thread, run when the dialog closes) was macOS-only since #511.
Install it on Linux too. Windows keeps the blocking pickers (its dialog pumps
its own messages), and the panel buttons' pickers (Settings, effect file
pickers) are unchanged.
Checked headlessly against a mock XDG portal: with the hook the main thread
stays in the event loop while a worker blocks in the portal wait, `ui.inspect`
still answers 7.5 s after the dialog opened, and an answered dialog runs
File ▸ Import; without it the main thread itself blocks in the portal wait and
the app answers nothing until the dialog closes.
Co-Authored-By: DeepSeek V4.1 Flash Free <noreply@deepseek.com>
craft-libs#169 is merged, so the fork pin is no longer needed. Pinned to
storytold/craft-libs 82a24b006eefa036b43c09a67fb9a3fbd17ffe63 (main after the merge) rather than the older 12281d07,
which predates resolve_absolute and the Windows colon refusal.
The picture comes from an item's proxy while Use Proxy is on, but the
Project panel, the Viewer, project.summary and footage.info asked only
about the item's own file: a proxy that couldn't be decoded (an AVI with
an unsupported codec, say) left the layer empty with no reason given.
They now ask FootageSource::item_problem, which gives the proxy's reason,
said to be the proxy's, for footage and compositions alike.
One list of movie extensions, in effectcraft-project, with AVI added:
FilmCraft reads AVI 1.0 / OpenDML. Tests against ffmpeg fixtures: Motion
JPEG with PCM audio, an unsupported codec (imports and says why it has no
picture), a file that isn't an AVI (an import error), and a damaged one
(a truncated recording imports as far as it goes; a garbled packet loses
its own frame only).
FilmCraft reorders AAC channel configuration 12 (7.1) to WAVE/SMPTE order,
as it does 3 to 6, so 7.1 AAC's left channel was mixed as the centre. The
downmix oracle test gains 6.1 (a program config element, left in AAC's
order) and 7.1 AAC fixtures.
Pasting Trim Paths, Wiggle Paths or a paint into a shape layer with nothing
selected put it on top of Contents, where it acts on no shapes. It now goes
to the bottom, as Add places it. Also fixes#1629.
Layer times were already saved and read back as exact ticks; the values in
the issue are 34f, 315f and 3033f at 59.94 fps. The viewer was black because
the playhead wasn't saved: a reopened comp started at 0, before its layers.
The project file's view (`activeComp`, `openComps`) now also records each
comp's current time (`compTimes`), restored on open within the comp's frames.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
The Advanced 3D renderer folded Accepts Shadows (Off/On/Only) into a
bool, so a shadow catcher set to Only drew as an ordinary lit surface.
The material now carries shadows_only. Such a fragment draws black at
the strongest shadow a light casts on it, as Classic 3D does, and it
goes in the blended pass so what is behind it shows through. The CPU
shader and advanced3d.wgsl get the same branch.
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
crypto_aux_image_with takes CryptoAux::{ColorsAndMatte, MatteOnly}, and
CryptoAux::for_display holds the rule for which displays read the ID
colours. A new GPU test checks every display x Matte Only against the CPU,
so the GPU fails the test if the shader starts reading RGB in a mode that
skips it (checked by mutation: forcing MatteOnly fails display 0).
Effects & Presets kept its favourites in `UiState::effects_favorites`,
which nothing writes out (only the workspace layout is saved), so the
stars were gone the next time the app opened. They now live in the
settings (`Prefs::effects_favorites`, saved when a star is clicked) like
the recent fonts and presets, survive Reset All like them, and a
hand-edited list loses empty and repeated ids on load.
Turning Solo on or off hides or shows every other layer at every frame, so it
now recaches the whole comp. The kept span is widened by the comp's shutter
(phase and angle), since a frame's motion blur samples cameras, lights and
transforms up to three frames away. Comp::any_solo is shared with the
renderer so both read Solo the same way.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
The worse half of #1531: when the property's comp remembers a key the user
selected, the old code didn't just do nothing, it eased, held or removed
that selected key instead of the one named. This test, written by
@switch87 in #1558, pins it: only the named keys change, removeKey(1)
removes key 1, the active comp stays active with its own key selection,
and the other comp's remembered selection comes back as it was. It fails
on the code before #1558 and passes on main.
GpuContext::request() now applies InstanceDescriptor::with_env() (WGPU_BACKEND,
WGPU_DX12_COMPILER, WGPU_VALIDATION, WGPU_DEBUG, ...), the same variables the
desktop app honours via egui-wgpu, and requests PowerPreference::from_env(),
defaulting to HighPerformance (an unknown WGPU_POWER_PREF logs a warning).
WGPU_ADAPTER_NAME (CLI/headless only; the desktop ignores it) picks the first
adapter whose name contains the trimmed value, case-insensitively. Empty or
blank counts as unset. Only the name is matched (backend via WGPU_BACKEND). A non-matching name is an
error that says so and lists each distinct adapter once as 'name (backend)', instead of wgpu::util::initialize_adapter_from_env's panic;
no adapters at all gets its own message.
Footage paths stored in a project are resolved through craft-docpath against
the project file when it is opened or imported: relative paths are taken from
the project's folder, and an item whose path is on another computer, names a
device or is a non-file URL is marked missing without being looked at. The
footage check, the changed-on-disk scan, Reload Footage, Relink, Edit Original
and Reveal in Finder resolve the path again before touching the file, and the
Project panel, Metadata panel and waveforms read no file details of missing
footage.
Lottie image assets are resolved against the Lottie file; one on another
computer is skipped with a warning. Files a 3D model names are read only when
local or on the model's own share.
Reveal in Finder refuses a folder that would open as an app or other bundle.
Files imported or relinked in this session are opened as given.
Runs every scenario N times (default 1, unchanged). Every run is still
appended to results.jsonl; with N > 1 one "kind": "summary" row per key
follows, whose metrics are the medians of the successful runs (user_s and
sys_s included, byte/instruction counts rounded) and whose summary holds
median, p90 (nearest rank, = max for N < 10), min and max. A failed run marks
the summary failed so the gate refuses it.
--compare uses the latest row per key; the table labels each side "median
of N" or "1 run" and warns when they differ, and --fail-over refuses such
keys. --repeat with --with is rejected. docs/testing.md documents the format.
A folder or bundle, a link to another kind of file, or a file whose extension
the footage importer doesn't take is refused with a message instead of being
handed to the system's default app.
Each 'media/<item>/<file>' entry is written to '<template> Media/<item>/<file>'
only when <item> is all digits and <file> is a plain file name (not empty, '.'
or '..', no separators, and on Windows no drive, stream or device name), and
the written path is checked to sit in an item folder of '<template> Media'.
read_stored skips entries with absolute, drive or '..' names.
The merge of main brought a double-click label hit area on the Properties
transform rows that had no accessible name; give it one so the audit ratchet holds.
Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>
"N minutes ago" and "N hours ago" have rows in all seven catalogs; a Japanese
interface read `保存日時:… {m} minutes ago`.
Co-Authored-By: DeepSeek V4.1 Flash <noreply@deepseek.com>