* #3099: placed .ai pages fill the size After Effects stored; null anchors default to the corner
Footage of an .aep keeps the size After Effects stored for a placed PDF / Illustrator / EPS
file (the ArtBox, rounded up), and masks and anchors are measured against it. The page was
drawn as a PDF viewer frames it (CropBox, /Rotate) at its own size, scaled by the width ratio
at full resolution and stretched to the stored aspect below 3/4: masks too large, art off
centre, squeezed at half resolution.
- effectcraft-pdf: Framing::Placed / parse_page_framed (ArtBox clipped to the CropBox,
/Rotate ignored); boxes with a non-finite corner or span are not used
- Footage::placed_page (set by the .aep importer, serialized only when true): the page is
framed so and filled into the stored size (effectcraft_render::vector_fit), decoded,
continuously rasterised and in Create Shapes from Vector Layer; Reload keeps the size;
the frame cache keys it by size and framing
- .aep import/export: a null's absent Anchor Point is [0, 0], as After Effects reads it
- fixture ai-mask-3099.aep (own synthetic files, scrubbed, profiles stubbed) and tests
against After Effects 2026's read-back
* #3099: placed-page framing only for .ai and .pdf, EPS as before; doc comments
After Effects' sizing was measured with PDFs named .ai only; an EPS from an .aep keeps its
bounding box at its own size (listed as not measured in docs/gaps.md and docs/aep-import.md).
Doc comments on the touched functions.
* #3099: shapes from a placed page keep its frame (track matte)
Create Shapes from Vector Layer converted every path of a placed page, so bleed, art past the
artboard or the page's background showed where the footage's raster hides them. The layers it
makes from a placed page now take a hidden "<layer> Frame" shape layer (the footage's
width x height) as their Alpha track matte: drawn at the comp's resolution, its edge is the
raster's on shape and image layers alike. The command returns the frame layer's id too.
* Disk cache: record the source files each frame reads
Part of #3184 (step 1): renders now report which footage files they read,
each with its identity (size and modification time) as read. Nothing uses
the list yet: images, cache keys and cache behaviour are unchanged.
- render: `reads` module with `FileStamp`, `ReadFile`, `ReadFiles` (sorted,
deduplicated, bounded; marked incomplete when it can't vouch for every
file) and the thread-safe `ReadLog`. `Renderer::reads` collects a frame's
files; `FootageSource::recording` lets a source note what it reads.
`file_stamp` uses the same identity.
- Layer cache entries keep the files their buffer was made of and report
them on every hit; derived entries (styles, blend space, flattened) keep
their base's. Buffers from the disk cache or the browser store don't know
their files yet and mark the list incomplete.
- Media pool: every file read notes its identity, taken from the file it
opens. Decoded frames, opened movies, GIFs, models and EXR channels keep
it with the cache entry, so a frame served from memory reports its file
without touching the disk.
- Viewer frame worker collects each frame's list and carries it to where
the disk entry is written (step 2 stores it).
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Automation: confined footage passes on the files it reads
Part of #3184: ConfinedFootage forwards FootageSource::recording to the
source it wraps, so renders of an automation session list their files
instead of coming back incomplete. The read tests also render through the
viewer's CancellableFootage wrapper.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Disk cache: frame entries keep their source files, comp key from memory
Part of #3184 (step 2). Fixes#3175: opening a comp no longer stamps every
footage file of the project before its first frame can show.
- The comp's content key (`disk_cache::comp_content_key`) is taken from the
project in memory alone: no footage or proxy file is stamped, no
`VirtualFileId` is asked. `comp_content_key_with` is gone; `frame_key`
hashes a new entry version, so entries of the earlier format are never
looked up again (LRU evicts them).
- Frame entries (formats 2 and 3) store the files the frame read
(`EntryFiles`: size and modification time as read; size and content hash
through `VirtualFileId` for files from memory; missing files), then the
pixels. Formats 0 and 1 read as misses and are deleted.
- Check on hit: `get_frame`/`get_frame_f16` look only at the listed files
(one metadata call each) on the frame worker. A changed, back or unreadable
file, or a damaged entry, is a miss: the entry is deleted and the frame
rendered and stored again.
- A frame whose file list is incomplete is shown but not stored. The RAM
preview keeps each frame's files, so `persist_missing` writes only frames
with a complete list.
- Remote frame worker: `FrameServer` records each frame's reads
(`take_files`); the web worker stores them with the entry and the page
checks them through the file table before using it. The browser's media
epoch existed only for the old key and is removed. Export does not use
frame entries.
- The cache indicator still only asks whether an entry exists.
Tests: entry format round trip and damage, the check per file, and in the
viewer: a changed file re-renders exactly its frames (and a reopen reads the
rest from disk); a frame checks only its own files in a project with a large
unused sequence and the key looks at no file; missing, unreadable files and
damaged entries never serve a stale frame.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Disk cache: layer entries keep their source files, no footage salt
Part of #3184 (step 3 of 4).
Layer buffers on disk (and in the browser's layer store) now carry the
files they were made of, like frame entries since step 2, and are checked
against exactly those files when used. The project-wide footage salt is
gone: nothing stamps every footage file any more.
- Layer entry format 4: the buffer's EntryFiles, then the pixels. A hit
checks only the listed files (metadata, or the VirtualFileId hook for
files from memory; Missing must still be missing); a change, a damaged
entry or the old format 0 is a miss and the entry is deleted, so the
re-rendered buffer replaces it. A hit reports its file list, so frames
made of buffers from disk are complete and get stored again.
- Buffers whose files can't all be named are not written.
- Layer disk keys: layer_disk_key = hash of the layer entry version, the
renderer version and the layer cache key (which names the footage items
with their paths and settings, from memory).
- PrefetchStore checks on use; an entry made of changed files is dropped
and forgotten, so the new buffer is queued over it. FrameServer passes
its virtual-file hook to its layer cache.
- Removed: footage_salt(_with), file_stamp, footage_stamp,
set_disk_salt, set_store_salt, Session::refresh_disk_salt,
poll_disk_salt, footage_fingerprint, disk_salt, disk_salt_background,
disk_salt_job, DiskSaltJob, the UI's per-frame poll, the salt in
FrameServer and in the availability worker (with its cache_enabled
plumbing). The disk cache is attached as soon as it is configured.
- Docs: architecture.md, web.md.
Tests: layer entries check their files (size, time, missing/back,
folder, damaged, old format, incomplete); virtual files; prefetch store;
media tests with a real pool across restarts (only the changed file is
read, projects with the same item ids never share an entry, missing,
unreadable and damaged never serve stale buffers); engine tests that the
cache is attached at once and edits do no file work (#1926, #3106).
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Disk cache: no-salt worker test, sequence paths in the frame-blend key
Part of #3184 (step 3 of 4).
- A frame-blended footage frame's layer-cache key now hashes the
sequence's file list: with no project-wide salt, two projects whose
items share an id and a first frame must not share its disk entry.
- Test: a frame worker syncing, patching and rendering a project with an
unused 5000-frame sequence asks its file hook only about the file its
buffer reads (the salt asked about every file at every sync).
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Disk cache: the comp key covers what its expressions can read
With an expression anywhere in the project, every comp's disk key hashed
every item of the project, so any edit (another comp, an unused footage
item) threw away every comp's frames on disk. The key now covers what the
comp can draw plus what the expressions among it can reach
(Project::pixel_reach):
- without expressions: the items the comp draws, without silent layers,
plus the footage its precomp layers swap in (Media Replacement);
- with expressions: every layer of the comps they reach, their markers,
the comps and footage they name with string literals (comp("Name"),
footage("Name")) together with which items have those names now, and
the footage named like a reached source (its data is read by name);
- the whole project when an expression computes a name, uses the object
model's constructors or internals, dynamic code, computed keys or
writes, or text the scanner can't read for sure (regex literals,
template strings, escapes): expression_reach errs towards reaching more.
Markers count only where an expression can read them (#1083). Memory
only, no file is looked at.
Tests: scanner and reach unit tests in the project crate; engine tests
for the key (own-comp expressions keep the key through edits elsewhere,
comp("Other") follows Other and not a third comp, a second comp taking
the name counts, a computed name counts every item, markers read from
another comp); a ui-egui test that the disk frames outside an expression
layer are carried when the comp it names changes.
Part of #3184. Part of #1492.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Disk cache: Reload Footage drops the entries of its files, docs
File > Reload Footage now deletes the frame and layer entries whose file
lists name the reloaded item's files (DiskCache::drop_files), so a file
replaced by one with the same size and modification time, which the
check on hit can't tell apart, is read again. The index knows keys, not
files: the writer thread reads the files section at the start of each
frame and layer entry (not the pixels) after the writes queued before
it, and deletes the entries that list one of the files. Until it is
done, an entry made of one of them is a miss and frames aren't linked to
new keys. The entries are gone for good, so they don't come back after a
restart. Automatic reloads don't drop anything: they follow a changed
stamp, which the check on hit catches. The browser needs nothing (its
file identities are content hashes).
Removed: disk_cache::seal, which steps 2 and 3 left without callers (the
tests use seal_format). Updated the module, seal_format and forget_media
docs, and docs/architecture.md / docs/web.md describe the final design:
what is cached, keys from memory, file lists checked on hit, nothing
scans the project, incomplete lists stay in memory, Reload Footage drops
entries, edits keep the frames they can't change.
Tests: render unit tests (same size and time passes the check but not
the drop; other files' entries stay; an entry queued before the drop is
dropped; a layer entry too; written again afterwards it is used; the
drop survives a restart; a pending drop is a miss), and an engine test
through file.reloadFootage.
Closes#3184. Part of #1492.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Disk cache: file stamps keep the whole modification time
A file's modification time was nanoseconds since 1970 as u64: a time before 1970
read as "no time" (two such files of one size looked alike) and times after 2554
were truncated. It is now i128 nanoseconds, negative before the epoch; None only
means the file system has no time. The content-key hash writes a presence tag and
the full value.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Automation: a refused footage read leaves the render's file list incomplete
Footage outside the read roots shows nothing and was noted as no file at all, so a
picture made without it had a complete, empty list and could be kept on disk for
a later session with other roots. A refused read during `recording` now marks the
list incomplete.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Render: a buffer kept by another worker comes with its own files
LayerCache::insert returns the files of the buffer it keeps, and Renderer::keep
notes them in the render's log and returns them, so a render that uses another
worker's buffer lists that buffer's files (a file changed between the two reads
then has two identities and the list is incomplete).
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Render: sampleImage and text fonts note the files they read
EvalCtx carries the render's read log. A sampleImage render records its footage
reads, keeps them with its per-thread cached buffer and notes them in the
evaluating render's log on every use. Text notes the font files it is drawn with,
with the identity their bytes were read with; a family that isn't installed, a
fallback or missing glyph, or a font from memory leaves the list incomplete.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Disk cache: frame entries store the whole modification time
A frame entry's file list stores a file's modification time as i128 nanoseconds
since 1970 (negative before), as the file stamps now keep it; the frame entry
format version goes to frame-entry-files-2 so entries in the old layout are not
read.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Disk cache: layer entries store the whole modification time
Layer entries share the frame entries' file list layout, which now stores the
full i128 modification time: the layer entry format version goes to
layer-entry-files-2. The module doc names the font files text is drawn with
among an entry's source files, and what keeps a list incomplete.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Layer cache: buffers that read other layers are keyed by the switches passed down
A layer whose effect reads another layer (Gradient Wipe, Set Matte, Blend…) gets
that layer drawn by its own renderer. Through a precomp layer, Switches Affect
Nested Comps, the switches inherited from the precomp layers above and motion
blur on change those pixels, but the key held only the layers' own switches: a
buffer made with the setting on was reused (from memory or the disk cache) with
it off. Such layers now derive their key with what the renderer passes down.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Layer cache: masked buffers are keyed by the mask motion blur gate
A mask with Mask Motion Blur On blurs even when the layer's own switch is off,
as long as the render's gate is open (Render Settings motion blur, and with
Switches Affect Nested Comps the precomp layers above). The key held the
layer's own motion blur state only, so a buffer blurred with the gate open was
reused with it closed (and the other way round), also from the disk cache.
Masked layer, input and footprint keys now tell a closed gate apart.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Render: cached buffers list what their expressions and substituted characters read
- Buffers made under `Renderer::recorded` (layer content, a Time effect's input, an adjustment
layer's footprint) evaluate their masks, shapes and effects with the context that notes into
the buffer's own read log, so a file an expression reads (`sampleImage`, also at shutter times
mask motion blur adds and the cache key doesn't see) is in the buffer's files.
- A styled layer served from the cache lists the files of the cached body and passes too, so
the buffers made of it (flattened, blending space) don't get a complete list when one of them
came with an incomplete one.
- A character put in by Character Offset or Character Value without a relayout notes the font
it is drawn with; a fallback face (or none) leaves the list incomplete.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Render: text lists the font file of a run that draws no glyph; tests clean their temp dirs
An empty first paragraph draws no glyph, but in a box its face sets the
first baseline that places every later line. The read list took faces only
from glyphs, so it could be complete without that file. Note each style
run's resolved face as well.
The font-reads and confine tests use tempfile::tempdir(): a fresh
directory per run, removed on panic too.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Disk cache: Reload Footage closes the gaps around its drop (#3184)
- A reload while the disk cache is off is kept on the session
(pending_disk_drops) and applied when the cache is switched on, before
anything is read from it.
- Each render takes the cache's drop generation before it reads (frame
worker; layer cache at the miss). An entry listing a file dropped after
that is refused under the queue's lock, so a render that was under way
during the reload can't store pixels from before it. Such a frame is
shown with an incomplete file list, so persist_missing skips it too.
The per-file record is bounded (past it, everything older is refused).
- An entry read while its drop was pending is a miss even when the
writer ends the sweep between the read and the check (a stale hit
found under load): the pending drops and the generation are taken
before the entry is read.
- Test: a reopened project serves its frame from disk with no source file
opened or decoded.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Disk cache: RAM frames keep the drop generation their render started at
Reload Footage empties the RAM preview, but an idle pass of
persist_missing may already hold a frame from before the reload. It
took the cache's drop generation when it ran, after the drop, so the old
pixels could be written back and, with the file's size and time
unchanged, served again after a restart.
Each RAM frame now keeps the disk cache its render started with and
that cache's drop generation then. persist_missing writes a frame only
to that cache, with that generation, and skips it once one of its files
was dropped since; a frame rendered without that cache is not written
from there.
Tests use tempfile directories (the layer drop test, the frame_files
folders under target/).
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Doc comments for the functions this PR touches
* Disk cache: cap the free-space reserve at 10 GB, skip encodes the limit refuses
The reserve the cache leaves free on its disk was max(2 GB, 5% of the
disk) (#2551). On a 4 TB disk with 190 GB free that is 200 GB, so a
cache set to 20 GB had a limit of 0: every write was refused, the cache
never held anything, and only a log warning said so.
The reserve is now clamp(5% of the disk, 2 GB, 10 GB). It is there to
keep the cache from filling the disk, not to keep a share of a large
disk free: 10 GB leaves the system room to work on any disk, a small
disk still keeps 2 GB, and a 100 GB disk keeps 5 GB as before. After
Effects has only a maximum cache size and no reserve; a clamp keeps
the floor for small disks, where a fixed 10 GB would take most of the
space.
Writes the limit refuses cost no work: DiskCache::accepts_writes (one
atomic read) is checked before a frame is converted (put_disk_frame)
and before frames and layers are compressed (put_frame, put_frame_f16,
put_layer). The frame workers spent about 8 ms per frame and 14 ms per
layer on encodes that were then refused. persist_missing returns at
once at limit 0 instead of converting the RAM frames on every idle pass.
Settings > Disk shows the limit in effect in MB under Maximum Disk
Cache Size, with a note when free disk space lowers it
(settings.disk.cacheLimit).
* Disk cache: refuse writes below 64 MB of room, show this disk's reserve
Review follow-ups to the reserve fix:
- accepts_writes also refuses while free disk space leaves less than
64 MB of room (a limit the setting asks for is always used): a few
frames would fill it, and the rest would be compressed only to be
refused.
- While writes are refused the idle passes ask for no repaint, so the
UI keeps a frame coming every 5 s: the free space is read again and
the RAM frames are written once there is room.
- Settings > Disk names the space kept free on this disk (the reserve
the last reading applied; the rule from MIN/MAX_DISK_RESERVE when it
is unknown), and the "no room" note follows accepts_writes.
- The settings.disk.cacheLimit automation label is machine-readable
and the same in every language: limitMb, maxMb, reserveMb,
spaceLimited, writes.
- cargo fmt.
* Disk cache: follow 3D model sources in the comp's reach
The reach walk followed comp, footage and solid sources but not
LayerSource::Model. An expression reading a model layer's source
(thisComp.layer("Model").source.name) left the model item out of the
comp's content key, so renaming the model kept the key and the old
frames on disk were served. Every source item is followed now
(LayerSource::item), which also counts the model when no expression
reads it (Advanced 3D draws it).
The same omission is fixed in the RAM preview's content walk
(frames.rs) and in the layer key's walk of referenced layers
(cache/dependencies.rs).
* Disk cache: a render's drop generation travels with its reads; no disk entries for Expression Selectors
Drop generation per render: the layer cache recovered a buffer's drop
generation from the latest miss of its key, so a second render of the
key that started after File > Reload Footage lent its generation to a
render still running from before, and that render's buffer (the file as
it was) was written after the sweep. Now Renderer::recorded starts each
buffer's read log at the store's drop generation before anything is
read (ReadLog::starting_at); ReadFiles carries the earliest generation
through merges, so derived buffers (styles, the blend-space copy, the
flattened layer) and frames that use a buffer from memory carry it too.
LayerCache::insert keeps a buffer made of a file dropped since its
reads began neither on disk nor in memory; a list that doesn't say
counts as made before every drop. DiskCache::dropped_since takes the
list's own generation too. missed_at keeps only the miss time.
Expression Selectors: the layer key evaluates a text Expression
Selector's amount for the first character only, so a per-character
dependency such as textIndex == 1 ? 0 : footage("ref.png").width was
not in the key, and after the footage item's width changed a reopened
session reused the old layer entry. A text layer with an Expression
Selector now marks its reads unkeyed (ReadFiles::is_unkeyed), which
merges like the generation; such buffers stay in memory and are never
written to disk. Frame entries are unaffected: the comp's frame key
hashes what the expressions name. The equality and hash of ReadFiles
ignore both new fields.
* Disk cache: never serve a RAM layer buffer made before a drop of its files
A render that passed the drop check could sit in put_layer's encode
while Reload Footage cleared the layer cache and dropped the file, then
publish its old pixels to memory after the purge; get, and a fresh
render's insert, then served them. The disk-hit promotion went through
the same insert_mem.
Every way the cache hands out a RAM buffer (get, the kept-first path of
insert, an existing entry in insert_mem) now checks the entry's files
against the store's drops from their own generation (ReadFiles::since):
an entry made before a drop of one of its files is forgotten and the
lookup misses, so a fresh render's buffer replaces it. insert_mem also
re-checks a buffer just before publishing it.
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* Image sequences: a gap in the numbering holds the previous frame, as After Effects
Split out of #1876 (originally 7850cbf4), because it reverses the colour bars
documented in #297 and needs its own discussion.
After Effects 2026 shows the last existing file across a gap in a sequence's
numbering (files 1, 2, 4, 5 show frame 2 at frame 3; read back from After
Effects). EffectCraft drew colour bars there. The media pool now holds the
previous file (Footage::sequence_file_held); colour bars remain only where no
file precedes the frame. Missing-frame reports on import are unchanged.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Image sequences: hold the first file of the preceding number across a gap; fix the import warning
A gap now holds the file sequence_file picks for the preceding number, so
files sharing a number do not switch at the gap. The Report Missing Frames
warning says the previous frame is held instead of "shown as placeholders".
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Image sequences: Interpret Footage says a gap holds the previous frame
The Interpret Footage note for a numbered sequence with gaps still said the
missing frames are shown as colour bars; the media pool holds the previous
frame there now. The note, its comment and two test doc comments say so,
and a forms test checks the note's wording.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
Co-authored-by: FredApps <153173854+FredApps@users.noreply.github.com>
* frames: keep cached frames an edit can't reach
Nudging, trimming or splitting a layer re-rendered the whole comp. The RAM
preview now carries every frame whose stack of active layers is unchanged
to the new comp identity; only the segments an edit touches re-render.
* disk cache: never drop frame writes; save frames kept after edits
Frames get their own write lane (bounded by bytes, written before layer
buffers), so a burst of layer writes no longer drops frames and leaves gaps
in the blue bar after reopening. Frames an edit kept in RAM are written to
disk under the comp's new content key when idle.
* frames: music and hidden layers keep the caches
Layers that can't change pixels (audio-only footage, AV layers with Video
off, when nothing reads them and there are no expressions) no longer count
for the RAM preview's dirty segments or the disk cache's comp and footage
keys. Adding, trimming or moving music keeps both caches.
RENDER_VERSION bumps to effectcraft-render-3 for the new key formula.
* ui-egui: background caching benchmark
cache_bench fills a comp's RAM preview the way idle caching does and
prints frames/s with decoder, footage-cache and disk-cache counters.
* frames: soloed music and hidden layers aren't silent
Solo hides every other layer, so soloing a music track or a layer with
Video off changes the picture. silent_layers no longer drops soloed
layers, so the RAM preview and the disk cache see Solo toggles.
* disk cache: audio files a layer reads stay in the layer salt
Audio-only footage left the disk layer salt so importing music keeps the
keys, but Audio Spectrum and Audio Waveform draw from an audio layer.
Footage another layer reads (or any, when a read layer is a precomp)
counts again, so overwriting that file doesn't reuse stale buffers.
* disk cache: retry frame writes the queue refused
put_frame reports whether the frame is on disk or queued. persist_missing
forgets the key of a refused write, so a full frame lane no longer leaves
RAM frames that are never written.
* ui-egui: cache_bench measures idle caching; checks --comp and --slots
Frames go through request_background with one slot per frame thread, as
Cache Frames When Idle does. An unknown --comp is an error (the active
comp is used only without --comp), --slots is at least 1, and the disk
report flushes queued writes instead of sleeping.
* disk cache: RENDER_VERSION effectcraft-render-6
This branch changes the cache-key formula (silent layers, Solo, read
audio in the footage salt), and upstream #2759 already took render-5
for the clip-clock change, so entries from either must not be reused.
* frames: rewrite RAM frames the disk cache evicted
persist_missing kept every disk key it ever queued, so a frame the disk
cache evicted later was never written back. The disk cache now tracks
frame writes still queued or in progress (frame_pending), and
persist_missing only remembers keys while it converts them.
* frames: idle passes continue while RAM frames wait for disk
persist_missing reports whether there may be more to write (a content key
being computed, frames being converted). Cache Frames When Idle then
schedules another pass, so a refused write is retried without waiting for
a UI event, and the passes stop once every frame is on disk or queued.
* frames: rewrite an evicted frame once, not on every idle pass
A disk cache smaller than the RAM preview, or a frame too large for it,
made idle passes write, evict and rewrite the same frames every 500 ms.
Each disk key is now written at most twice under one disk limit (the
write and one rewrite after an eviction); a new limit resets the count.
The persist test waits for the conversion to forget its keys before
checking that no work is left.
* frames: the work area doesn't change pixels
Setting the work area (B, N) cleared every cached frame, in RAM and on
disk: it was compared with the comp's pixel settings and hashed into the
disk key. It is a preview and render range only, like the Resolution, so
it no longer counts.
* frames: audio edits keep frames unless something draws the audio
Changing a clip's Audio Levels, its audio effects or its Audio switch
cleared the clip's cached frames, and the comp's disk cache, although
nothing drew that audio. The audio now counts only for the layers whose
audio is heard (Project::heard_layers): those a layer picks in an effect
(an Audio Waveform or Spectrum, even on itself), the layers of a picked
precomp, and every layer while an expression (which can read Audio
Levels) exists. Music in a precomp that a waveform in the outer comp
picks is no longer treated as silent either.
* frames: an expression only reaches the frames of its own layer
One expression anywhere in the project made every edit clear the
comp's whole cache, and so did editing a layer another layer reads
(its parent, matte, or a layer it picks). Expressions can read
anything, but they only draw in their own layer: an edit now re-renders
the frames where it changed something, plus those of the layers with an
expression and of the layers that read a reached layer. With
expressions, an edit elsewhere (another comp, an item's name, a marker,
music) reaches only the expression layers' frames.
* frames: an edit inside a precomp re-renders only where the precomp shows it
Editing anything inside a precomp cleared every cached frame of the
comps that nest it, even a music level in it. Project::dirty_spans now
follows precomps: it takes the spans their comp changed in, shifts and
scales them by the precomp layer's start and stretch (its whole span
under a time remap or Responsive Design timing), and keeps the outer
comp's other frames. Layers that read a changed precomp (a matte, a
waveform) re-render where they are active.
* disk cache: keep the frames an edit can't reach
The disk cache keys frames on a hash of the whole comp, so every edit
lost the frames that were only on disk (the blue bar), even a rename;
only those still in RAM were written again under the new key. When an
edit keeps RAM frames, it now also queues a disk carry: on the frame
pool, each kept frame of every disk series in use for that comp is hard
linked (or copied) to its new key with DiskCache::link_frame, oldest
edit first. The old entries stay, so undo finds them too.
* frames: a keyframe edit re-renders only around the keys it changed
Changing one keyframe (its value, interpolation or ease, in the
Timeline or the Graph Editor) re-rendered the layer's whole length, so
a key on a full-length layer cleared the whole cache. A layer that
differs only in keyframes of its Transform properties now re-renders
from two keys before the first changed key to two after the last
(auto-Bezier and continuous tangents reach the neighbouring segments),
to its in or out point past the first or last key. Static values,
expressions, roving keys, time remap and time effects still reach the
whole layer; effect keyframes do too for now (simulations and time
effects read other frames).
* frames: music volume keeps frames while no expression reads audio
Any expression in the project (a wiggle on another layer, even a
disabled one) made every layer's audio count as read, so changing a
music layer's Audio Levels re-rendered every expression layer and
changed the comp's disk key. Audio now counts for expressions only when
one may read it (Heard::audio_exprs): its text names audio or walks
properties by index. An audio-only change nothing reads no longer counts
as a change elsewhere in dirty_spans either.
* frames: a keyframe edit with few keys or beside a self-contained expression keeps the other frames
Changing a Scale key of a layer with two or three keys re-rendered the
layer's whole length: with fewer than two keys before (or after) the
changed one, the span fell back to the in (or out) point instead of the
first (or last) key, past which the value holds. And any layer with an
expression re-rendered on every edit, so a wiggle on a full-length layer
cleared the whole cache. An expression layer is now reached by edits
elsewhere only when its text may read outside its layer (it names a
comp, layer, footage, the project or its source); its parent and the
layers it picks are still read through referenced_layers.
* viewer: the caching chip stays up between uncached frames, with a spinner
The "Caching frames…" chip showed only while playback waited for a
frame, so during caching it flickered on and off with every frame that
arrived. It now stays up 0.6 s after the last wait (and hides at once
when playback stops). It is also smaller and quieter: a spinner, then
"Caching frames" without the ellipsis in dimmed smaller text, on a
fainter chip sized to its text.
* preview: the Preview panel's cache bar counts the preview's Resolution
With a preview Resolution set (Half, Third…), the frames a preview
plays are cached at that scale, but the Preview panel's bar counted the
series the viewer shows. When playback stopped, the viewer went back to
the comp's Resolution and the bar dropped from full to the frames cached
there. It now counts the preview's own series (Auto still follows the
viewer). The viewer and the Timeline's cache bar are unchanged.
* Contributors: add nazar-gavrylyk's name
* frames: an expression reading its own layer's markers or audio re-renders that layer
With expressions in the project, a layer's markers count when comparing it, and its audio counts
when an expression may read audio, so a marker or volume edit re-renders the edited layer over
its own span. Comp markers still count only through layers whose expressions name thisComp.
* frames: a keyframe edit on a layer with an expression re-renders the layer
An expression on the keyed layer can read the keyed property at other times (Rotation reading
Position with valueAtTime), so the frames past the changed keys may change too.
* cache_bench: read decoder counters through effectcraft-media
Only crates/media, crates/export and crates/interchange may depend on the FilmCraft crates.
* cache_bench: clips end where the next one starts
* frames: write-back uses the worker's disk keys while a Roto Brush model is active
persist_missing keyed disk frames on FrameKey::opts, which also carries the Roto Brush model
stamp; the worker and disk_frames key on the render opts' hash alone. With a model active every
RAM frame looked missing, was written again under keys nobody reads, and recorded a second disk
series.
* frames: an edit two precomps down reaches the outer comp
A precomp layer whose comp Arc didn't change was skipped, but the comps nested in it may have
(an edit in Inner leaves Mid's Arc as it was), so Outer kept every frame. Every nested comp is
walked now, each once per edit.
* cache_bench: stop when the disk cache can't be cleared
* frames: one disk carry job at a time
carry_disk runs on every timeline paint and idle pass, and spawned a pool job whenever carries
were queued; during a drag the extra jobs waited on the carry lock and held frame-pool threads
from the viewer. A scheduled flag keeps one job, which drains the queue in order until it's
empty.
* frames: a panicking disk carry is skipped, not left holding the job
The carry job clears carry_scheduled only on its normal exit; a panic in a carry would have left
it set for the session, so no later carry ran. Each carry is caught like the content key's
hashing, so the job always reaches its exit.
* frames: an expression reading its own in point or index re-renders its layer
A trim or rename kept the layer's frames outside the cut when the layer
drew the same apart from its span, but an expression on it can read its
own inPoint, outPoint or name (a fade from inPoint), so every frame of
the layer changes. Such a layer is no longer treated as only respanned.
An expression reading `index` reads the layers above it too: a layer
added or removed there shifts it, so `index` now counts as reading
outside the layer.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* frames: an edit of a comp reaches the expressions of the precomps it nests
An expression in a precomp can read the comp that nests it
(`comp("Main").layer("Controls")`), but the walk into nested comps only
counted changes outside the edited top comp. Editing a hidden Controls
layer there (or any layer, when the precomp is time-shifted or reads it
at other times) kept every precomp frame in RAM and linked them all on
disk under the new key. Nested comps now see an edit of the comp above
them as an edit elsewhere.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* frames: an edit in a precomp under a time effect reaches its whole layer
A precomp layer running Echo, Posterize Time, Time Displacement or
another effect that reads the layer at other times shows a nested change
far from where it maps, but only the mapped span (a nested frame either
side) re-rendered. Such a layer now gives its whole span, like a time
remap. `reads_other_frames` lists those effects (every `ec.time.` and
`ec.sim.` effect and the others that call `self_at`); keyframe spans use
it too.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* frames: a keyframe edit beside muted keys re-renders the whole layer
Muted keys are skipped when a property is evaluated, so the keys that
play around an edited key can be any distance away, but the span counted
two stored keys either side. A segment from an earlier playing key kept
its stale frames. Muted keys now give the layer's whole span, like
roving keys.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* frames: one echo in the precomp time-effect test (three saturate alike), rustfmt
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: FredApps <153173854+FredApps@users.noreply.github.com>
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
- A watch-folder render gives the host session's set back after its own
project replaced it on the shared footage source.
- Guard gpu fx_depth::IDS against reads_aux drifting apart.
- Count picture and channel decodes per thread instead of reading the
shared channel cache, so parallel tests can't make the checks flaky.
- The engine test fails when no set was ever sent.
- Docs: Media Replacement items are learned at their first frame.
Refs #474
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
The pool learned that an effect reads a footage item's channels only at the
first aux() call, so the first frame was decoded twice (picture, then in
full), and the hint was never cleared after the effect was removed.
The session now gives the footage source the whole set of files read by
enabled 3D Channel effects (FootageSource::set_aux_footage) with every
project change (Session::bump: edits, undo, redo, history jumps, rollbacks,
project open), sending it only when it changed. The pool keeps that set and,
as a safety net, what aux() learns; a new set drops what was learned.
Refs #474
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Review follow-ups:
- Files in use are never dropped from the channel cache: planes an effect
holds, the files of the last 4 pictures made of their planes until their
effects ask for the channels, and decodes in progress, which now count
the planes they will allocate (from the header) against the budget. With
4 frames at once over a budget of one file, each file decodes once (test).
- A decode that panics removes its entry instead of leaving it decoding.
- One decode allocates at most 8 GiB of planes (512 MiB on 32-bit and
wasm); a header asking for more is refused with the reason.
- A shared picture whose file has no cached channels (a failed read, a
broken part it doesn't use) is decoded from its own channels.
- Comment why waiting on a decode may block a rayon worker; drop the
subsampling check and test (the exr crate refuses subsampled files).
- Docs: the cache is a soft bound; a single-part file still decompresses
every channel; the first frame and the image crate's route decode twice.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
- The channel cache decodes a file once however many callers ask for it at
the same time (the others wait for that decode), and is bounded by the
bytes of its planes (1 GiB, least recently used out first, a file counting
as used when its decode finishes, the newest file always kept) instead of
four files of any size.
- Once an effect has read a footage item's channels, its pictures are made
of the cached planes, also for files with an unnamed RGB layer (bit for
bit what the image crate shows, which still decodes the files the planes
can't stand in for); footage alone decodes only its picture's channels
(a multi-layer file's were all decoded and cached for every frame).
- Channels are decoded straight into their display-window planes, and the
picture is converted from the planes without two interleaved copies.
Measured on a 30-frame 2560x1440 sequence of 32 channels (DWAA), one frame
at a time: footage alone 0.185 -> 0.073 s per frame and 4.4 -> 1.8 GB peak;
with an unnamed RGB layer plus Cryptomatte 0.244 -> 0.159 s; multi-part
plus EXtractoR 0.194 -> 0.127 s.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
profile_of matched BT.2020 primaries before looking at the transfer, so
HDR10 and HLG footage got the Rec. 2020 profile and a managed project
decoded it with the 2.4 gamma. A PQ render of a solid that is 191,64,128
re-imported as 130,73,101, and HLG as 156,36,97.
Map BT.2020 + PQ to Rec. 2100 PQ and BT.2020 + HLG to Rec. 2100 HLG, the
profiles Interpret Footage already offers. A PQ and an HLG ProRes render
now read back into an sRGB project as the solid they came from.
FilmCraft's EDL reader keeps source timecodes as media time and leaves the
rebase to the caller after probing. The probe now keeps the file's start
timecode (Footage::file_timecode), and an EDL import rebases each found
file's clips with filmcraft_interchange::rebase_source_timecode before the
layers are made, as FilmCraft's own import does.
The reader reports a track's media duration (mdhd). For H.264 with
B-frames that runs past the last shown frame by the encoder delay the
edit list trims, so a 75-frame 25 fps clip imported as 76 frames / 3.04 s.
The footage's duration now follows the video track's edit list when it
is shorter (never longer; a delayed start keeps the reader's duration),
as the frame rate is already corrected from the header.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
The gains of an AAC source now come from the configuration FilmCraft decodes
it with, read from MP4/MOV (esds), Matroska (CodecPrivate) and LATM in MPEG
TS/PS (its first StreamMuxConfig). Channel configurations 3 to 6, 11 and 12
arrive reordered to WAVE order, 4 as L R C Cs, 7 in element order. A program
config element goes by its element positions, except the six structures in
which ffmpeg's encoder fills its own channel order across them (an LFE in a
side SCE, a back centre in a side pair), recognised by its "Lavc" comment.
ADTS can only signal configurations 1 to 7 that FilmCraft decodes, which the
channel count tells apart. A decode of fewer channels than the layout keeps
its first ones (7 of configuration 7's 8 in MPEG-TS LATM).
FilmCraft reorders AAC configurations 3 to 6, 11 and 12 to WAVE/SMPTE order
and leaves configuration 7 and program config elements as coded, so the
channel count alone can't say which order arrives: ffmpeg writes 7.1 as
configuration 7 (C L R first) and 6.1 as a PCE it fills in its own order
(L R C LFE Cs Ls Rs), while FilmCraft's encoder writes a centre-first PCE.
The order is now read from an MP4/MOV's AudioSpecificConfig when the source
opens; other containers keep a channel-count guess.
The ffmpeg oracle test gains configuration 12 (ffmpeg's 7.1 relabelled) and
skips PCE files ffmpeg 4.2 marks as stereo, which FilmCraft reads as two
channels.
An EXR's display window sizes a plane per channel, so 60000² over a 1×1 data window
was a multi-gigabyte allocation per channel; past 16384² (the vector footage limit)
the file is refused. An audio header's sample rate scales the samples read, so
0xFFFFFFFF Hz made one conform chunk about 47 GB; rates outside 1–768 kHz are an
error, and the audio reads as silence as for any unreadable source.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
A project can name /dev/zero, a FIFO or a folder as footage; reading those whole
never ended (or ran out of memory). The media layer's whole-file reads (probe,
pool, model side files) and the engine's FsServices::read_file now open the file,
refuse a non-regular one, and reserve its length fallibly, so a sparse file that
claims more than memory is an error too.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
An SVG or PDF declaring up to 30000×30000 was drawn into one 14 GB image whose failed
allocation aborted the app. Decoding now refuses sizes past what Continuously Rasterize
draws (16384 a side, shared as MAX_VECTOR_SIDE) with an error naming the size.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Conflicts:
- viewer.rs: the undecodable-footage notice moved into phase_scene on main; it now
collects its layers in footage_problems, which keeps the proxy and collapsed-precomp
rules of #1701.
- project.rs: main's row layout, with the problem marker going by item_problem.
- movie_bytes.rs: the H.264 pin is FilmCraft 09aaf9b's bytes plus main's 19-byte
BT.709 colr box (104_322 + 19 = 104_341).
render/footage.rs imports ItemKind now that main names its imports.
Poison recovery, OsStr::to_str and char predicates only; S4325 casts are
f64 to f32 and stay.
Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>
* Footage: use resolve_absolute for stored paths
* Lottie and models: use resolve_absolute for linked files
* CI: release only with git dependencies from storytold
* Use the shared git-sources check and pin checkout in release.yml
* Resolve a model's side files through resolve_absolute; report C:\x as invalid
* CI: parse cargo config, including the legacy .cargo/config, in the git-sources check
Resampling footage audio divided by the requested mix rate, so a rate of 0 panicked. The test decodes a 44.1 kHz WAV at rate 0 and expects a read of the requested length. Without the guard it panics with 'attempt to divide by zero'.
Review: two footage items of one file with different nominal sizes could share a sized entry,
though one is resampled and the other kept as decoded.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Review: still_at_size returned a smart object's pixels unresampled when they differed from the
footage's nominal size. It now follows footage_buf: pixels larger than nominal are resampled to
the requested size, smaller ones are left for the renderer to scale up.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Review: frame_at_size at a still's native size made a second cache key, so the pool decoded
and kept a second full-size copy of a frame thumbnail() or frame() already had.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
The media pool honoured the requested size only for movies; stills came back
at full size and the renderer resampled them on every frame. A 21120 px wide
plate at Quarter was re-filtered each frame, and four of them (1.85 GB as f32)
did not fit the 1 GiB pool, so they were also decoded again and again.
Stills are now resampled once with effectcraft_raster::resample (the same
call the renderer made, so pixels are unchanged) and the pool keeps the
reduced copy under the sized key.
#1812 project at Quarter, CLI bench: 410 ms -> 33 ms a frame (26 ms with the
layer cache); desktop playback 2% -> 60-99% of real time.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Two findings from the review of #1423.
RF64 (WAVs over 4 GB): a chunk too big for 32 bits has a size field of
0xFFFFFFFF and its real size in the file's `ds64` chunk. The reader took the
field literally, so it stopped at the `data` chunk and never reached the
`cue ` and `_PMX` chunks that follow it. It now resolves such sizes through
`ds64` (the `data` size, and a table of other chunks, capped at 1,024 entries),
with checked arithmetic, and leaves the field as it was when there is no
usable `ds64`.
The `adtl` list: every `labl` record scanned the growing list of names, which
is quadratic in the number of records, and nothing bounded how many were
kept. The cue points are now read first, names and lengths are kept only for
those ids in hash maps, and at most 40,000 `adtl` sub-chunks are looked at.
The duplicate check between the cue and XMP markers uses a set instead of a
scan. What a file yields is unchanged for any file within the bounds: a `labl`
still wins over a `note`, and the first `ltxt` still gives the length.
Tests: an RF64 file whose markers follow a sentinel-sized `data` chunk, sizes
taken from the `ds64` table (and not taken when the table has no entry),
hostile `ds64` sizes and tables and every truncation of an RF64 file, and a
100,000-record `adtl` list that is read in linear time, with the cap applied.
The RF64 tests fail with the previous reader.
Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>
Valentin Klein
Brandon Thomas
JonRC
bflatasticandClaude Opus 5.5
tylerjenningsw
tylerjenningsw
Dylan M. Taylor
midasmatterhorn
skylar taylor-barrick
aiongg
aiongg
dedandClaude Opus 5.5
Kristian MyramandClaude Sonnet 5.5