* AEP import: map the Cryptomatte plug-in to EffectCraft's Cryptomatte
The importer reported every instance of the free Cryptomatte plug-in
(match name `Cryptomatte`) as a lost effect. It now becomes
`ec.3d.cryptomatte`:
- CryptomatteData decodes the plug-in's Settings data (its own
little-endian layout, documented in docs/aep-format.md 3.7): the
Cryptomatte layer name and the selection text, both carried verbatim.
- Output maps to Display / Matte Only (Colors -> Colors, Matted RGBA ->
Matte, Matte Only -> Matte Only). Matted Colors, Selection Mode when on,
keys or expressions and anything else stored are reported, and
unreadable data is reported as damaged.
- EffectCraft's Cryptomatte gains a Layer Name text parameter. A layer the
footage has under exactly that name wins; otherwise the Layer popup
decides as before. The CPU, GPU and pick paths share one resolver
(AuxChannels::resolve_crypto_layer_named). Without it, plug-in layer
names such as Crypto_Material would silently fall back to the first
layer.
On a real production project this takes the effect losses from 132 to 44.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* AEP import: check Cryptomatte against an After Effects 2026 sample of our own
A sample made in After Effects 2026 (plug-in 2.6.6: a fresh effect,
Selection Mode on, each Output item, with read-backs and renders)
corrected three points of the mapping:
- Selection Mode on was dropped silently: After Effects writes it as a
default-state record (tdsb 3) holding 1, which the general reader does
not take. The Cryptomatte step reads that record itself and reports it.
- No Output record is now the plug-in's default Colors, also for an
instance that borrows the project's definition (every instance after
the first), which was reported as having no reliable default and fell
back to EffectCraft's Preview. Keyed or unreadable Output values fall
back to Colors too, still reported.
- Matted Colors imports as Display Matte (the same matte over the layer's
own colours) instead of Preview, still reported as an approximation.
docs/aep-format.md 3.7 gets the sampled Output default, the tdsb 3
Selection Mode record and the real fresh Settings data (an empty text of
length 1 and its MurmurHash3, twice, not cry1 and zeros); docs/aep-import.md
the render comparison with After Effects (Matted RGBA matches; Matte Only
differs in alpha; Colors with no layer chosen shows another layer).
Tests: the exact fresh Settings bytes, tdsb 3 Selection Mode, borrowed
definitions, and an opt-in test against the sample once it is in the
corpus (aep/cryptomatte.aep, ignored until the corpus pin includes it).
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* AEP import: write Cryptomatte's popup items in the test as After Effects does
The injected Cryptomatte definition wrote `pdnm` and `fnam` as `LIST`
chunks. After Effects writes them as plain chunks whose body is chunks
(`NESTED_IDS`), and the reader only looks there, so the tests never read
Output's item names: they passed through the fallback for a definition
with four items and no `pdnm`, which uses the plug-in's own list.
The harness now writes both as After Effects does. New tests check that
the injected definition reads back with its items and instance name,
that Output is mapped by the item the stored index names (items in
another order, case, an unknown item), and that the fallback without a
`pdnm` still works. With the old `LIST` form, or with the mapping
ignoring the items, the new tests fail.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* AEP import: check Cryptomatte's layer and selection against presets of our own
The After Effects 2026 sample 1400 now has two preset compositions that choose a layer and
pick one object (box_red on CryptoObject) or one material (mat_paint on CryptoMaterial).
CryptomatteData reads both as they are; the picked tokens are the EXR manifest's hashes,
which EffectCraft's selection grammar reads the same as the names.
- The u32 at 108 is MurmurHash3 of the selection text with its NUL (three texts).
- A unit test pins the 127-byte preset data; the sample test now covers all eight
compositions with their layer and selection.
- Render check: EffectCraft's matte covers exactly the pixels After Effects draws as
selected, edge coverage within 0.0002. docs/aep-format.md 3.7 and docs/aep-import.md.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Cryptomatte import: report damaged Settings and Selection Mode records
Review follow-ups for #3109:
- CryptomatteData refuses a selection text without its NUL and checks the zero byte
at 112 for an empty text too.
- A Settings record without its data, and a Selection Mode record whose value cannot
be read, are reported as damaged data, not taken as the default.
- Layer Name is the effect's last parameter, so the earlier parameters keep their
indexes and upgraded instances have the same order as new ones.
- A Cryptomatte layer name is matched as given before it is trimmed.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Cryptomatte settings: require the selection's NUL to end its declared length
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Cryptomatte: match rank planes by the exact layer name
crypto_rank_planes looked planes up with a case-insensitive whole-name match, so
layers Crypto_A and crypto_a shared planes. The layer prefix now matches
case-sensitively; component letters still match in either case.
Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>
* Format
Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>
* AEP: the exporter knows Extra::Cryptomatte; rustfmt
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
Co-authored-by: FredApps <153173854+FredApps@users.noreply.github.com>
* Cryptomatte: the Layer popup lists the footage's Cryptomatte layers (#473)
The popup was the constant CryptoObject / CryptoMaterial / CryptoAsset. It now lists the
Cryptomatte layers of the layer's OpenEXR footage, and those three when there are none. The
stored value keeps its meaning (0-2 the standard layers, 3 and up the file's other layers in
name order), so older projects render the same.
Refs #473
Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>
* Cryptomatte Layer popup: timeline editor, one menu helper, probe and fallback tests (#473)
Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>
* Cryptomatte Layer popup: give further layers of a standard kind a custom slot
A.CryptoObject keeps slot 0; B.CryptoObject and later ones get 3+ instead of
being dropped, so they can be selected, picked and rendered.
Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>
* Format; note same-kind layers in the footage docs
Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>
* Format the merged code with rustfmt
Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Sonnet 5.5 <noreply@anthropic.com>
* Color Stabilizer: sample the reference where the points were at the reference time (#3125)
After Effects 2026 samples the reference frame at the positions the
Black / Mid / White Points had at the reference time. With keyframed
points it therefore corrects even a static picture: our importer sample
(colstab-43-keys, Levels, Black Point (64, 90) -> (151, 99) over 1 s)
renders at 0.5 s as the Levels map out = a + b*v of the ramp with
b 1.2935..1.2965 and a -0.2365..-0.2350, which is the Black Point's
current sample (107.5, 94.5) sent to the reference sample at (64, 90).
EffectCraft sampled both frames at the current points, so the card
stayed unchanged (slope 1). The samples now read the points at the
reference time through the host (params_at), falling back to the
current points without one. CPU and GPU share the sampler
(color_stabilizer_maps).
Sample Size's unit is not pinned by the samples (every size 1..40 leaves
the card unchanged in After Effects; that only bounds the sampled area)
and is left as it is.
Part of #3125
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Linear Wipe: After Effects' edge position and feather profile (#3125)
Measured on our importer samples (linwipe-*, 2026-11-05, After Effects
2026, 320 x 180):
- The edge sits at lo + completion * (hi - lo) whatever the feather (the
set-all render's 50 % line is at -5.25, predicted -5.266); 0 % keeps
the layer and 100 % clears it even with Feather 32000. EffectCraft
extended the travel by the feather, 13 px off at Feather 16.
- The feathered edge is the hard matte blurred with the layer's edges
repeated: three box passes of radius 6 per axis fit Feather 16
(sigma 6.35..6.6, taken as Feather / 2.5), including the extra
opacity where the edge meets the layer's left side. EffectCraft drew
a linear ramp Feather px wide.
- Without feather the edge pixel is anti-aliased (143/255; coverage
gives 0.6). EffectCraft drew a hard step.
set-all alpha: before max 195, 4646 px (8.1 %) off by more than 2/255;
after max 15, 529 px (0.9 %), all along the layer's left side (at most
2 elsewhere). Feather 0 renders: max 112 -> 10 on the edge column.
CPU: coverage matte, raster::gaussian_blur (3 box passes, edges
repeated); GPU: the same matte from gen_linear_wipe (new modes), its
gaussian_blur, then a multiply, so both match. Sigma is capped at twice
the layer's longer side; NaN values leave the layer as it is.
Projects saved before keep the old ramp: a hidden legacyFeather
parameter that migrate::legacy_default sets on upgrade (as for Ripple
and Block Dissolve).
Part of #3125
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Linear Wipe on the GPU: 100 % clears the layer before the angle is read
A NaN angle left the layer unchanged on the GPU while the CPU cleared it.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
After Effects 2026 accepts 0 to 200 for Brush Size of both effects (a
script setting 201 is refused with "out of range 0 to 200"); the range
here ended at 50. The slider keeps its 0 to 50 travel; larger values are
typed.
Co-authored-by: Claude Sonnet 5.5 <noreply@anthropic.com>
* Grow the buffer to the pinned quad so Corner Pin draws outside the layer rectangle (#1938)
* Corner Pin: grow through pad_sides, skip adjustment layers, clamp to the pixel budget (#1938)
grow_sides returns the four sides for Buf::pad_sides on both paths, replacing grow_to/regrow and the inline GPU copy. Growth is skipped on adjustment layers, cut proportionally to the shared pixel budget (and 16384 per side) instead of giving up, and covered by tests for a far pin, an adjustment layer and a degenerate quad.
* Corner Pin: give the grow_sides test its own doc comment (#1938)
* effects: Corner Pin keeps a finite buffer for non-finite pins and grows without popping as a pin moves far away
* effects: rustfmt the Corner Pin non-finite pin test
---------
Co-authored-by: skylar <hi@skylar.cc>
The reference test now checks the bound the PR states in the code space of the renders
(the sRGB curve x 6553.5) instead of a linear 2e-3, which allowed about 28 codes at the dark end.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
New After Effects 2026 renders of the same EXR at Amount 25, 50 and 75
(our own 1110-extra sample, 16-bit PNGs) confirm the transfer curve that
was fitted at 84, 90 and 100. The worst channel error over all pixels is
4.0, 5.5 and 4.3 of 65535, against 997, 2415 and 3867 for the old soft
knee. The code is unchanged.
The measured-reference test now covers all six Amounts.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
The effect used a soft knee on the brightest channel and left everything
below the knee unchanged. After Effects compresses the whole range. Fitting
our own 16-bit renders of an HDR ramp and coloured patches (Amount 0, 84,
90, 100) gives:
Y = max(0.30 R + 0.59 G + 0.11 B, 0)
comp = min(c / (1 + Y), 1) per channel
out = ((1 - t) c^0.4 + t comp^0.4)^(1/0.4) t = Amount / 100
A grey value x maps to x / (1 + x) at Amount 100. The worst error against AE
drops from 985 to about 2-4 of 65535 at Amounts 100, 90 and 84. Amount 0
stays identical.
CPU and GPU change together. Tests: a reference table of measured values,
GPU parity at Amount 90, and over-range input that exercises the clip at 1.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
With Matte Only on, Cryptomatte wrote the matte into all four channels:
a premultiplied white only as opaque as the matte. After Effects'
Cryptomatte plug-in shows Matte Only as an opaque grey picture, the
matte in RGB with alpha 1 (its Matte Only render of 2026-11-05 is opaque
black where nothing is selected). The CPU effect and the GPU shader now
both give (m, m, m, 1).
Projects saved before keep their render: a hidden Matte Only In Alpha
switch (off for new instances, presets and AEP imports) is turned on by
migrate::legacy_default when an older instance is upgraded on open, and
then keeps the matte in every channel on CPU and GPU.
Tests: the CPU path for a partly covered pixel, an unselected one and
outside the aux area, in both forms; the upgrade of a saved instance;
the GPU parity test over every display with Matte Only off, on and on
with the legacy switch; the host pick tests read whole pixels.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Plug-ins: API 2 (PluginHost, padding, layer_span)
Split out of the OpenFX work so it can be reviewed on its own. Additive; the WebAssembly ABI
stays at 1.
- point3 / layer / text / hidden parameters, integer sliders, parameter groups.
- EffectPlugin::padding (transparent pixels around the buffer, at most 4096 per side).
- EffectPlugin::render_v2 with a PluginHost: the input at other times, other layers, parameters
at other times, frame rate, per-instance key, the layer's source range.
- EffectEnv::layer_span from the renderer; MAX_PLUGINS 1024.
- plugin_error: a plug-in effect's last render error, for the UI.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01KxacwTpUwqyfpcLgKW8yjS
* Plug-ins: external effect helpers (crates/helper-host)
Native plug-in formats run in separate helper programs, never in EffectCraft's process
(docs/adr/0001-external-effect-helpers.md). New safe-Rust crate effectcraft-helper-host (L3,
native only, unsafe forbidden): it finds helper programs, starts each as a child process and
registers its effects through plug-in API 2, so the UI and command surface need nothing new.
- Protocol v1 (docs/external-helpers.md): JSON lines over stdin / stdout (helper replies are
prefixed so plug-in chatter is ignored); pixels go through a frame exchange file (/dev/shm on
Linux), never through the pipe. Render-time callbacks for the input at other times, other layers
and parameters at other times, with nested renders through the same helper.
- A helper that exits, hangs past its timeout or breaks the protocol is stopped. The render fails
with a message, the frame is left as it was, and the helper restarts for the next render. An
effect that stops its helper 3 times is turned off (helper_blocklist.txt).
- Opt-in: nothing starts helpers unless the user asks (Effect > Scan for Effect Helpers), or opts
in to starting them at launch with EFFECTCRAFT_HELPERS=1, an environment variable, so writing
to the settings folder alone can't run code. effect.helpers.scan / load are refused for
confined agent sessions (confine.rs), like file.executeFile.
- Discovery: helpers/ next to the app (Contents/Helpers on macOS), helpers/ in the settings
folder, EFFECTCRAFT_HELPER_PATH.
- Commands effect.helpers.list / scan / load; Effect menu entries (translated); the last render
error of an effect shows as a warning sign after its name in Effect Controls.
- serve(): the helper side for Rust helpers. tests/it/main.rs runs the whole protocol (render,
padding, callbacks, nesting, threads, crash, restart, block list, hang) against a fake helper,
with nothing to install.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01KxacwTpUwqyfpcLgKW8yjS
* Effect helpers: address review (start failures, frame file mode, nextest listing)
- A helper that can't start (not installed any more, restarting too often, no frame exchange
file) is reported but no longer charged to the effect being rendered: it is Failure::Refused,
not Failure::Broken, so it never counts toward turning that effect off. New check in
tests/it: once the helper is out of restarts, renders of an effect fail without blocking it
(fails without the fix: the effect was turned off after 3 such renders).
- The frame exchange file is created owner-only (0o600) on Unix: it holds the user's frames and
/dev/shm is shared. Asserted in the frames unit test.
- tests/it (harness = false) speaks the libtest listing protocol cargo-nextest uses:
`--list --format terse` prints `helper_protocol: test` (nothing with `--ignored`), and
`helper_protocol --exact` runs the checks.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01KxacwTpUwqyfpcLgKW8yjS
* Effect helpers: bound writes to a helper, drain stderr, keep callbacks in step
- Writes to a helper go through a writer thread with the request timeout: a
helper that stops reading its stdin (hung with a large callback answer or
render request pending) no longer blocks the render thread forever while
holding the helper.
- stderr is drained as bytes (lossy, in 64 KiB pieces) to the end: output that
isn't UTF-8 stopped the reader, closing the pipe under the helper (EPIPE /
SIGPIPE on its next write); lines were unbounded.
- Callback images that can't be written are answered with `null` instead of
failing the render while the helper waits (which left the protocol out of
step); a frame that can't be written before the request is sent is not
charged to the effect.
- Mid-render calls use the render's own process: no respawn or heartbeat ping
while the helper is waiting for an answer.
- Waiting for a busy helper is bounded (load timeout) instead of forever;
status() no longer blocks on a running render.
- Reap the child when start-up fails after spawning; cap the block list read.
- Scripts start helpers only with Allow Scripts to Write Files and Access
Network on (they run native code), as for File.execute().
- helper-host declares the workspace's no-panic crate lints; the desktop
main() keeps its doc comment.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Effect helpers: rustfmt the fake provider, build the test session in its initializer (clippy)
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Plug-in Library: offer WebAssembly API 1 releases only; a helper already stopped mid-render isn't charged again
- WasmPlugin loads only modules at the WebAssembly ABI version, which stays 1 while
PLUGIN_API_VERSION is 2: share it as effects::plugin::WASM_API_VERSION and have the
library's compatibility check use it, so it never installs an API 2 release that
can't load.
- with_running: a process that is already gone was stopped by what broke it (a nested
render, charged there), so this render fails without charging its own effect.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* frames: plug-in effects count as reading other frames (plug-in API 2)
With main's narrowed frame invalidation (#2795), an edit inside a precomp under an
effect that reads its layer at other times must reach the layer's whole span.
Plug-in API 2 gives every plug-in effect the input at other times, so any effect
outside ec. counts.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
Co-authored-by: FredApps <153173854+FredApps@users.noreply.github.com>
* frames: keep cached frames an edit can't reach
Nudging, trimming or splitting a layer re-rendered the whole comp. The RAM
preview now carries every frame whose stack of active layers is unchanged
to the new comp identity; only the segments an edit touches re-render.
* disk cache: never drop frame writes; save frames kept after edits
Frames get their own write lane (bounded by bytes, written before layer
buffers), so a burst of layer writes no longer drops frames and leaves gaps
in the blue bar after reopening. Frames an edit kept in RAM are written to
disk under the comp's new content key when idle.
* frames: music and hidden layers keep the caches
Layers that can't change pixels (audio-only footage, AV layers with Video
off, when nothing reads them and there are no expressions) no longer count
for the RAM preview's dirty segments or the disk cache's comp and footage
keys. Adding, trimming or moving music keeps both caches.
RENDER_VERSION bumps to effectcraft-render-3 for the new key formula.
* ui-egui: background caching benchmark
cache_bench fills a comp's RAM preview the way idle caching does and
prints frames/s with decoder, footage-cache and disk-cache counters.
* frames: soloed music and hidden layers aren't silent
Solo hides every other layer, so soloing a music track or a layer with
Video off changes the picture. silent_layers no longer drops soloed
layers, so the RAM preview and the disk cache see Solo toggles.
* disk cache: audio files a layer reads stay in the layer salt
Audio-only footage left the disk layer salt so importing music keeps the
keys, but Audio Spectrum and Audio Waveform draw from an audio layer.
Footage another layer reads (or any, when a read layer is a precomp)
counts again, so overwriting that file doesn't reuse stale buffers.
* disk cache: retry frame writes the queue refused
put_frame reports whether the frame is on disk or queued. persist_missing
forgets the key of a refused write, so a full frame lane no longer leaves
RAM frames that are never written.
* ui-egui: cache_bench measures idle caching; checks --comp and --slots
Frames go through request_background with one slot per frame thread, as
Cache Frames When Idle does. An unknown --comp is an error (the active
comp is used only without --comp), --slots is at least 1, and the disk
report flushes queued writes instead of sleeping.
* disk cache: RENDER_VERSION effectcraft-render-6
This branch changes the cache-key formula (silent layers, Solo, read
audio in the footage salt), and upstream #2759 already took render-5
for the clip-clock change, so entries from either must not be reused.
* frames: rewrite RAM frames the disk cache evicted
persist_missing kept every disk key it ever queued, so a frame the disk
cache evicted later was never written back. The disk cache now tracks
frame writes still queued or in progress (frame_pending), and
persist_missing only remembers keys while it converts them.
* frames: idle passes continue while RAM frames wait for disk
persist_missing reports whether there may be more to write (a content key
being computed, frames being converted). Cache Frames When Idle then
schedules another pass, so a refused write is retried without waiting for
a UI event, and the passes stop once every frame is on disk or queued.
* frames: rewrite an evicted frame once, not on every idle pass
A disk cache smaller than the RAM preview, or a frame too large for it,
made idle passes write, evict and rewrite the same frames every 500 ms.
Each disk key is now written at most twice under one disk limit (the
write and one rewrite after an eviction); a new limit resets the count.
The persist test waits for the conversion to forget its keys before
checking that no work is left.
* frames: the work area doesn't change pixels
Setting the work area (B, N) cleared every cached frame, in RAM and on
disk: it was compared with the comp's pixel settings and hashed into the
disk key. It is a preview and render range only, like the Resolution, so
it no longer counts.
* frames: audio edits keep frames unless something draws the audio
Changing a clip's Audio Levels, its audio effects or its Audio switch
cleared the clip's cached frames, and the comp's disk cache, although
nothing drew that audio. The audio now counts only for the layers whose
audio is heard (Project::heard_layers): those a layer picks in an effect
(an Audio Waveform or Spectrum, even on itself), the layers of a picked
precomp, and every layer while an expression (which can read Audio
Levels) exists. Music in a precomp that a waveform in the outer comp
picks is no longer treated as silent either.
* frames: an expression only reaches the frames of its own layer
One expression anywhere in the project made every edit clear the
comp's whole cache, and so did editing a layer another layer reads
(its parent, matte, or a layer it picks). Expressions can read
anything, but they only draw in their own layer: an edit now re-renders
the frames where it changed something, plus those of the layers with an
expression and of the layers that read a reached layer. With
expressions, an edit elsewhere (another comp, an item's name, a marker,
music) reaches only the expression layers' frames.
* frames: an edit inside a precomp re-renders only where the precomp shows it
Editing anything inside a precomp cleared every cached frame of the
comps that nest it, even a music level in it. Project::dirty_spans now
follows precomps: it takes the spans their comp changed in, shifts and
scales them by the precomp layer's start and stretch (its whole span
under a time remap or Responsive Design timing), and keeps the outer
comp's other frames. Layers that read a changed precomp (a matte, a
waveform) re-render where they are active.
* disk cache: keep the frames an edit can't reach
The disk cache keys frames on a hash of the whole comp, so every edit
lost the frames that were only on disk (the blue bar), even a rename;
only those still in RAM were written again under the new key. When an
edit keeps RAM frames, it now also queues a disk carry: on the frame
pool, each kept frame of every disk series in use for that comp is hard
linked (or copied) to its new key with DiskCache::link_frame, oldest
edit first. The old entries stay, so undo finds them too.
* frames: a keyframe edit re-renders only around the keys it changed
Changing one keyframe (its value, interpolation or ease, in the
Timeline or the Graph Editor) re-rendered the layer's whole length, so
a key on a full-length layer cleared the whole cache. A layer that
differs only in keyframes of its Transform properties now re-renders
from two keys before the first changed key to two after the last
(auto-Bezier and continuous tangents reach the neighbouring segments),
to its in or out point past the first or last key. Static values,
expressions, roving keys, time remap and time effects still reach the
whole layer; effect keyframes do too for now (simulations and time
effects read other frames).
* frames: music volume keeps frames while no expression reads audio
Any expression in the project (a wiggle on another layer, even a
disabled one) made every layer's audio count as read, so changing a
music layer's Audio Levels re-rendered every expression layer and
changed the comp's disk key. Audio now counts for expressions only when
one may read it (Heard::audio_exprs): its text names audio or walks
properties by index. An audio-only change nothing reads no longer counts
as a change elsewhere in dirty_spans either.
* frames: a keyframe edit with few keys or beside a self-contained expression keeps the other frames
Changing a Scale key of a layer with two or three keys re-rendered the
layer's whole length: with fewer than two keys before (or after) the
changed one, the span fell back to the in (or out) point instead of the
first (or last) key, past which the value holds. And any layer with an
expression re-rendered on every edit, so a wiggle on a full-length layer
cleared the whole cache. An expression layer is now reached by edits
elsewhere only when its text may read outside its layer (it names a
comp, layer, footage, the project or its source); its parent and the
layers it picks are still read through referenced_layers.
* viewer: the caching chip stays up between uncached frames, with a spinner
The "Caching frames…" chip showed only while playback waited for a
frame, so during caching it flickered on and off with every frame that
arrived. It now stays up 0.6 s after the last wait (and hides at once
when playback stops). It is also smaller and quieter: a spinner, then
"Caching frames" without the ellipsis in dimmed smaller text, on a
fainter chip sized to its text.
* preview: the Preview panel's cache bar counts the preview's Resolution
With a preview Resolution set (Half, Third…), the frames a preview
plays are cached at that scale, but the Preview panel's bar counted the
series the viewer shows. When playback stopped, the viewer went back to
the comp's Resolution and the bar dropped from full to the frames cached
there. It now counts the preview's own series (Auto still follows the
viewer). The viewer and the Timeline's cache bar are unchanged.
* Contributors: add nazar-gavrylyk's name
* frames: an expression reading its own layer's markers or audio re-renders that layer
With expressions in the project, a layer's markers count when comparing it, and its audio counts
when an expression may read audio, so a marker or volume edit re-renders the edited layer over
its own span. Comp markers still count only through layers whose expressions name thisComp.
* frames: a keyframe edit on a layer with an expression re-renders the layer
An expression on the keyed layer can read the keyed property at other times (Rotation reading
Position with valueAtTime), so the frames past the changed keys may change too.
* cache_bench: read decoder counters through effectcraft-media
Only crates/media, crates/export and crates/interchange may depend on the FilmCraft crates.
* cache_bench: clips end where the next one starts
* frames: write-back uses the worker's disk keys while a Roto Brush model is active
persist_missing keyed disk frames on FrameKey::opts, which also carries the Roto Brush model
stamp; the worker and disk_frames key on the render opts' hash alone. With a model active every
RAM frame looked missing, was written again under keys nobody reads, and recorded a second disk
series.
* frames: an edit two precomps down reaches the outer comp
A precomp layer whose comp Arc didn't change was skipped, but the comps nested in it may have
(an edit in Inner leaves Mid's Arc as it was), so Outer kept every frame. Every nested comp is
walked now, each once per edit.
* cache_bench: stop when the disk cache can't be cleared
* frames: one disk carry job at a time
carry_disk runs on every timeline paint and idle pass, and spawned a pool job whenever carries
were queued; during a drag the extra jobs waited on the carry lock and held frame-pool threads
from the viewer. A scheduled flag keeps one job, which drains the queue in order until it's
empty.
* frames: a panicking disk carry is skipped, not left holding the job
The carry job clears carry_scheduled only on its normal exit; a panic in a carry would have left
it set for the session, so no later carry ran. Each carry is caught like the content key's
hashing, so the job always reaches its exit.
* frames: an expression reading its own in point or index re-renders its layer
A trim or rename kept the layer's frames outside the cut when the layer
drew the same apart from its span, but an expression on it can read its
own inPoint, outPoint or name (a fade from inPoint), so every frame of
the layer changes. Such a layer is no longer treated as only respanned.
An expression reading `index` reads the layers above it too: a layer
added or removed there shifts it, so `index` now counts as reading
outside the layer.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* frames: an edit of a comp reaches the expressions of the precomps it nests
An expression in a precomp can read the comp that nests it
(`comp("Main").layer("Controls")`), but the walk into nested comps only
counted changes outside the edited top comp. Editing a hidden Controls
layer there (or any layer, when the precomp is time-shifted or reads it
at other times) kept every precomp frame in RAM and linked them all on
disk under the new key. Nested comps now see an edit of the comp above
them as an edit elsewhere.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* frames: an edit in a precomp under a time effect reaches its whole layer
A precomp layer running Echo, Posterize Time, Time Displacement or
another effect that reads the layer at other times shows a nested change
far from where it maps, but only the mapped span (a nested frame either
side) re-rendered. Such a layer now gives its whole span, like a time
remap. `reads_other_frames` lists those effects (every `ec.time.` and
`ec.sim.` effect and the others that call `self_at`); keyframe spans use
it too.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* frames: a keyframe edit beside muted keys re-renders the whole layer
Muted keys are skipped when a property is evaluated, so the keys that
play around an edited key can be any distance away, but the span counted
two stored keys either side. A segment from an earlier playing key kept
its stale frames. Muted keys now give the layer's whole span, like
roving keys.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* frames: one echo in the precomp time-effect test (three saturate alike), rustfmt
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: FredApps <153173854+FredApps@users.noreply.github.com>
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* G8: plug-in library
Community Plug-in Library for WebAssembly effect plug-ins (#376): one
reviewed catalog (index.json), install / update / remove from Settings >
Plug-in Library (also Effect > Plug-in Library...), library.* commands,
start-up loading of installed packages with SHA-256 checks. Downloads go
through the system curl (https, GitHub hosts), as trained models do.
Preview before installing (library.preview): the release is downloaded,
checked like an install, and rendered in the sandbox on a built-in sample
frame at default settings (2 s at 12 fps) with a Before/After split, plus
the effect's parameters, "Open on GitHub" and an optional author video
link (catalog field preview.video). Authors need to do nothing for it.
Hardening: a module that fails to load leaves the installed copy alone,
Update All updates every package in one job, minApp also applies to an
explicit version, curl ignores ~/.curlrc and URL globbing, unique temp
files, percent-decoded file URLs. Plug-in effect slots grow from 64 to
256 with a clearer overflow error.
Docs: plugins.md "Plug-in Library", publishing-plugins.md (author guide
from zero to listed), gaps.md; examples/plugin-catalog is the starting
content of the catalog repository (schema, validation workflow).
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* contributors: credit iseemhlyfta
* G8: plug-in library: doc comments on the library's functions
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* G8: plug-in catalog check: require one object with schema 1 and a packages array
An empty file or several JSON values passed jq empty, and with
SKIP_SCHEMA=1 nothing else checked the catalog's shape.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* G8: plug-in library: one preview texture set; catalog schema requires effects
The preview kept a texture set per package version previewed (about
6 MB each) for the whole session; it now keeps one, replaced when
another package is previewed. Releases in the catalog schema must list
at least one effect id, as the author guide says.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* G8: plug-in catalog schema: effect ids follow the manifest's id rules
Letters, digits, '.', '_' and '-', and not the reserved 'ec.' prefix,
so library.missing can match them.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* G8: refuse Plug-in Library jobs while automation file access is confined
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* G8: split the Plug-in Library page into toolbar, card, links and actions
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* G8: show Plug-in Library toasts without a Roto job; cache preview frame checks
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* G8: log Plug-in Library packages that fail to load at start-up
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* G8: check an update before replacing a loaded package; Update All past failures
- An update to a package that is already loaded is now compiled and its manifest checked
(through the previewer, without registering it) before the new file is written and the old
version's folder deleted. Before, a release with the right SHA-256 that didn't load replaced
the working version and failed at the next start.
- Package ids that differ only in case, or end in a dot, would share one folder on Windows and
macOS: the catalog keeps the first of them, and ids can't end in a dot (schema too).
- Update All: a package that can't be picked or installed no longer stops the others; the
result names what was updated and what wasn't.
- Downloads: at most 5 redirects, and one that ends off GitHub's hosts is refused, as the module
docs say.
- A job that panics no longer leaves the library busy; poisoned status locks are used, not
dropped.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* G8: rustfmt the update test
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
Co-authored-by: FredApps <153173854+FredApps@users.noreply.github.com>
The pool learned that an effect reads a footage item's channels only at the
first aux() call, so the first frame was decoded twice (picture, then in
full), and the hint was never cleared after the effect was removed.
The session now gives the footage source the whole set of files read by
enabled 3D Channel effects (FootageSource::set_aux_footage) with every
project change (Session::bump: edits, undo, redo, history jumps, rollbacks,
project open), sending it only when it changed. The pool keeps that set and,
as a safety net, what aux() learns; a new set drops what was learned.
Refs #474
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
A source with no box-sized area clear of transparent pixels (a small
layer inside a blur's padding) got no sample boxes, and
grain_stats_boxes then measured the whole image, edge included. With no
clean box Match Grain now matches no grain, as After Effects applies
none when its samples hold transparent areas. Compensate for Existing
Noise took the same route through the layer's own boxes, so a layer
with no clean box now has nothing taken off. grain_stats_boxes keeps
its empty-list fallback.
A box's own pixels had to be opaque, but the high-pass that measures its
grain reads 3 px around it, and a transparent pixel there is black once
unpremultiplied. A blur earlier in the stack pads the layer with
transparent pixels, so boxes along that border measured the edge as
strong, smooth colour grain, and Match Grain drew 12 px colour cells
from a clean source on the frames that picked them. Boxes now need their
3 px surround opaque too (a summed-area table keeps the check O(1) per
candidate). Remove Grain picks its boxes the same way.
* Follow-up to #2823: box each of several objects around its whole matte on correction frames
With several objects, a correction frame's box came from the model's cut
of that object's strokes on the frame alone. A stroke on part of the
object boxed only that part, and SAM 2 followed only that part from
there on. Each object's matte is now carried to the frame with its own
strokes, from its first prompted frame or its nearest tracked frame, by
the walk Chain::ensure uses (now Chain::carry). These mattes are not
cached, since object keys hold tracked results.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Follow-up to #2823: carry corrections before the base from the base outwards
Prompt frames were visited in ascending order, but before the base the
carry walks towards it, so each correction there re-walked from the
root. Visit each side from the base outwards and sort the prompts back
into frame order for the tracker.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Follow-up to #2823: find an object's carry root in one pass over its strokes
The root search scanned every frame's strokes from the prompt frame to
the base, for every prompt. Take the object's foreground stroke on the
way that is nearest the base in one pass instead; the root is the same.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* M13.35: reproduce an earlier object correction losing tracked matte
* M13.35: carry earlier object corrections from valid tracked mattes
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
Co-authored-by: FredApps <FredApps@users.noreply.github.com>
Timewarp's Adjust Time By = Speed showed source time t x speed(t) / 100,
using only the Speed value at the current frame. With Speed keyframed
(a speed ramp), the source jumped to another part of the footage at the
change, and while Speed eased down it ran backwards or held still.
An animated Speed (keyframes or an expression) is now integrated over
layer time from 0 through the effect host's param_at, on a fixed
sub-frame grid with a bounded sample count. A static Speed keeps the
exact previous formula, so the Timewarp goldens are unchanged.
Local: effectcraft-effects time_fx lib tests (8), timewarp golden,
clippy -p effectcraft-effects. Full cargo xtask ci deferred to GitHub CI.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
frame_matte looked up the frozen mattes for every frame, and that hashes
the whole serialized cache and recomputes its keys, so freezing a long
span again grew with frames times cache size. The Freeze job now
resolves the applicable cache once (applying_frozen) and passes it to
frame_matte.
With frozen mattes now used in a session without the model that froze
them, a second Freeze in such a session still segmented every frame
again, so it replaced the model's matte with the session engine's.
frame_matte, which only Freeze calls, now returns a frame's frozen matte
while the frozen mattes apply, and segments only frames that have none.
The frozen key hashes the chain keys, whose seed holds the session's
model, so mattes frozen with SAM 2.1 didn't match in a session on
Classic, such as a fresh effectcraft-cli render, and the frame was
segmented again with Classic. Accept the key under any Roto Brush model
too, as Object Matte has done since #1852. frozen_key is unchanged for
projects frozen today, and editing a stroke or a matte setting still
makes the frozen mattes stale.
* Fix#2823: Propagate boxes SAM 2 around the matte shown on the stroked frame
The tracker's box prompt came from the classic graph cut of the strokes,
which can leak into the background; SAM 2 then filled the whole box.
Build the box from the model's own matte (segment_with), the one shown
before Propagate. segment_with falls back to the classic cut when the
model can't segment, so non-model paths are unchanged.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Fix#2823: box a lone object around the matte shown on correction frames too
A correction frame shows a matte propagated from the frame before, not a
fresh model cut, so the tracker's box came from a different matte than
the one on screen. With one object the box now comes from Chain::ensure,
the matte shown on that frame. Several objects share one shown matte, so
each keeps the model's cut of its own strokes. Cancelling while the shown
matte is computed stops instead of falling back, and the prompt frame is
read only when needed.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
A tile boundary that lands exactly on an output pixel centre puts the tile
fraction at exactly 0 or 1, and the sample position at the source's geometric
edge — where sample_bilinear mixes in half a texel of the transparent outside.
The fold column comes out half-faded: a visible seam line along the mirrored
boundary, which sweeps the tile as Tile Center animates across pixel centres
(#2820). Both the CPU path and the GPU kernel switch to the clamped sampler,
which repeats the edge texel there; interior samples are untouched, and the
default single-tile identity mapping already sampled texel centres.
The regression test puts the folds exactly on pixel centres (tileWidth 50%,
centre on the layer, mirror on) and asserts the fold columns stay opaque and
equal the edge texels they mirror — it fails on the unfixed code at alpha 0.5.
Fixes#2820
Co-authored-by: rahul05ranjan <11793455+rahul05ranjan@users.noreply.github.com>
MarekSpodBiedryandskylar
Dylan M. Taylor
Brandon ThomasandClaude Opus 5.5
JonRC
arnav-hiwarkarandClaude Opus 5.5
rahul05ranjan
Kristian Myram