Review fixes for the disk plane writes:
- A queued write holds copies of the planes it writes instead of the
plane store's whole set, so it counts exactly what it holds, the
memory accountant's trim frees what the queue reports, and it never
keeps the store from letting a set go.
- A set is queued in writes of at most 256 MB, and only a single plane
larger than the cache is left out, so a large set (a 4K file of many
channels) reaches the disk plane by plane instead of being refused
whole.
- Each plane entry counts as one encode again.
- A plane entry is shuffled straight from the samples' bits, without
the widened intermediate copies.
A queued plane write shares the plane store's set, which keeps the store
from letting go of it; trimming the disk queue now drops such writes
too, so the store can free the set in the same balance. The reader uses
saturating offsets, and the batch test fails a later batch by position.
- The reader reads the next batch of chunks while the one before
decompresses, reads chunks that follow each other in the file in one
request, starts with a small batch so decoding begins early, places
the planes in parallel, and converts half samples a slice at a time.
- A plane entry stores a half channel as half floats when every value
round-trips bit for bit (NaN planes and float data stay f32), with a
plain byte-plane shuffle; one entry per channel, read in parallel on a
hit. Old multi-plane entries (format 5) read as misses.
- The planes of one decode go to the disk writer as one job that shares
the plane store's set instead of a copy per channel; the queue counts
their bytes once the store lets go of them.
- The plane store loses its unused level, and one eviction loop serves
the budget and the memory accountant; dropping for bytes keeps
remembered failures.
- A region of interest reads rows only at the top level (no collapsed precomps, no nested
comps, no adjustment layers); input and footprint keys never keep a rows-only buffer; a rows
request takes the whole frame from the frame cache when it is there and keeps nothing itself.
- Sequence layers are keyed by their frame (without frame blending or fields), so times within
a frame share the entry.
- A decode taken over by a decode thread runs under the asker's cancel flag and hints.
- Disk planes: one entry per channel, read back whatever was asked for before; queued planes
are moved in (counted exactly), written by channel with checked math; the write refused when
a plane is of another size. Segmentations are compressed on the writer thread.
- Memory accountant: the plane budget is in the sum; the disk queue counts only bytes it alone
holds and never drops frame writes; one balance at a time, inserts balance at most every
100 ms, a refilling holder stays protected for 10 s.
- Reload Footage gives thumbnails new keys; thumbnail keys are worked out at most every 0.25 s.
- Localizer: network footage locations (Settings > Disk, e.g. P:\) besides UNC paths; copies
recorded beside them and adopted after a restart, stale temporaries deleted; the disk cache's
reserve kept free; by default beside the disk cache's folder, 20 GB; a copy gone meanwhile
reads the share; status shown translated, with the network locations.
- Tests: hooks hold the queued decode for the claim test; the disk test uses its own paths.
- A region of interest looks up the whole layer's cached buffer first; only a miss reads the
rows (and keeps nothing).
- The rows margin counts the region's rounding at the layer's own scale; the region test covers
shrunk and enlarged layers at reduced resolution.
- Layer and plane writes are bounded by the bytes they hold while queued (1 GB).
- The disk cache's drop generation is taken before the file is opened, so planes of a file
reloaded meanwhile are refused.
- A plane entry of another shape than the planes asked for is a miss before anything is
decompressed.
- The claim hand-off is one atomic phase (queued, running, claimed): no gap between the claim
and the queued job.
The renderer maps a top-level region of interest back through a 2D footage layer's transform
to the footage rows it shows, grown by the resampling (wider at a reduced scale) and the
effects' declared margins (effects::pixel_margin: 0 for the per-pixel 3D Channel effects). It
reads the whole frame for 3D layers, motion blur, frame blending, fields, layer styles, effects
that don't declare, and comps that read layers' pixels elsewhere (layer parameters,
expressions); a layer read in part isn't layer-cached. FootageSource::frame_rows hands the rows
to the media pool, which keys the frame by them and reads only those rows (1-line chunks:
exactly those lines), for footage whose channels no effect reads. Pixels in the region are
those of a whole-frame read.
Settings > Disk > Localize Network Footage (off by default), with a folder and a size limit:
OpenEXR files on network shares (UNC paths) are copied one at a time on a background thread,
never on the playback path, under a temporary name and renamed when complete. A copy is read
only while its source has the size and modification time it had when copied and the copy is
complete; entries made of it keep naming the share's file and identity. The least recently
used copies go beyond the limit; Settings > Disk shows what the localizer is doing.
render::memory::Accountant: one budget (the sum of the Memory & CPU budgets) over the holders
that register with it: the footage frames (priority 0), the disk write queue (0), the decoded
footage planes (1) and the layer cache (2). Over the budget it frees lowest priority first,
down to 90% of it; a holder that makes again what it just let go of (the layer cache tells its
refills) is protected while it thrashes. Holders are held weakly and balanced after their own
inserts, with their locks released.
A plane kind in the disk cache (planes/): named f32 planes, bit-exact, keyed by the source
file's path and identity, the channel set, the level and the rows; listing their source file,
so a changed file or Reload Footage drops them (the sweep covers planes). The plane store reads
them before decoding and queues what it decoded (encoded on the writer thread, refused when the
disk has no room or the file was dropped since the decode began). The footage source gets the
disk cache with set_disk_cache.
Queued writes carry their pixels (a layer buffer shared with the RAM cache, a frame moved in)
and the writer thread converts and compresses them; rendering threads go on at once. An entry
larger uncompressed than the cache may hold is refused before it is queued.
key_any keys an OpenEXR sequence layer (no proxy) by item and source time as it keys stills, so
a processed frame is kept in RAM and on disk; its entries list the frame file they read, so
Reload Footage and a changed file drop them as before.
- A covered batch is served before a remembered failure; failures are kept per request, so a
broken part or too many channels never hides the picture; a picture too large with its
effects' channels is read alone.
- Hostile headers: parts whose data window or uncompressed block is out of bounds are refused
before any decoder sees them (index, reader and the image crate's whole-file path, import).
- Seek and read errors are transient (Stopped), not remembered; the copy path notes its file.
- The index drops the headers' other attributes and previews, is bounded by bytes and checks
the file's identity before it is reused.
- A picture read alone isn't kept twice (plane store and frame cache).
- A waiter whose decodes keep being called off decodes a copy; rounds are bounded.
- The Cryptomatte probe asks with its own effect's need; animated parameters are found in
nested groups.
- Test hooks and caps are keyed by path; new tests: data window offsets, failures per request,
too large with channels, the file bound, hostile data windows, damaged files, rows and levels
on every compression and on tiles.
FootageSource gains aux_for (only what a need reads), aux_names (names from the headers) and
set_aux_needs (per footage file, what its effects read, so the picture is decoded with those
channels in one pass); the wrappers forward them. The renderer asks for the union of the layer's
effects' needs; the engine sends each aux footage's needs with the aux footage set (all channels
when a parameter is animated or an effect doesn't say); layer.channels and the popups read names
only.
A render that passed the drop check could sit in put_layer's encode
while Reload Footage cleared the layer cache and dropped the file, then
publish its old pixels to memory after the purge; get, and a fresh
render's insert, then served them. The disk-hit promotion went through
the same insert_mem.
Every way the cache hands out a RAM buffer (get, the kept-first path of
insert, an existing entry in insert_mem) now checks the entry's files
against the store's drops from their own generation (ReadFiles::since):
an entry made before a drop of one of its files is forgotten and the
lookup misses, so a fresh render's buffer replaces it. insert_mem also
re-checks a buffer just before publishing it.
Drop generation per render: the layer cache recovered a buffer's drop
generation from the latest miss of its key, so a second render of the
key that started after File > Reload Footage lent its generation to a
render still running from before, and that render's buffer (the file as
it was) was written after the sweep. Now Renderer::recorded starts each
buffer's read log at the store's drop generation before anything is
read (ReadLog::starting_at); ReadFiles carries the earliest generation
through merges, so derived buffers (styles, the blend-space copy, the
flattened layer) and frames that use a buffer from memory carry it too.
LayerCache::insert keeps a buffer made of a file dropped since its
reads began neither on disk nor in memory; a list that doesn't say
counts as made before every drop. DiskCache::dropped_since takes the
list's own generation too. missed_at keeps only the miss time.
Expression Selectors: the layer key evaluates a text Expression
Selector's amount for the first character only, so a per-character
dependency such as textIndex == 1 ? 0 : footage("ref.png").width was
not in the key, and after the footage item's width changed a reopened
session reused the old layer entry. A text layer with an Expression
Selector now marks its reads unkeyed (ReadFiles::is_unkeyed), which
merges like the generation; such buffers stay in memory and are never
written to disk. Frame entries are unaffected: the comp's frame key
hashes what the expressions name. The equality and hash of ReadFiles
ignore both new fields.
The reach walk followed comp, footage and solid sources but not
LayerSource::Model. An expression reading a model layer's source
(thisComp.layer("Model").source.name) left the model item out of the
comp's content key, so renaming the model kept the key and the old
frames on disk were served. Every source item is followed now
(LayerSource::item), which also counts the model when no expression
reads it (Advanced 3D draws it).
The same omission is fixed in the RAM preview's content walk
(frames.rs) and in the layer key's walk of referenced layers
(cache/dependencies.rs).
Review follow-ups to the reserve fix:
- accepts_writes also refuses while free disk space leaves less than
64 MB of room (a limit the setting asks for is always used): a few
frames would fill it, and the rest would be compressed only to be
refused.
- While writes are refused the idle passes ask for no repaint, so the
UI keeps a frame coming every 5 s: the free space is read again and
the RAM frames are written once there is room.
- Settings > Disk names the space kept free on this disk (the reserve
the last reading applied; the rule from MIN/MAX_DISK_RESERVE when it
is unknown), and the "no room" note follows accepts_writes.
- The settings.disk.cacheLimit automation label is machine-readable
and the same in every language: limitMb, maxMb, reserveMb,
spaceLimited, writes.
- cargo fmt.
The reserve the cache leaves free on its disk was max(2 GB, 5% of the
disk) (#2551). On a 4 TB disk with 190 GB free that is 200 GB, so a
cache set to 20 GB had a limit of 0: every write was refused, the cache
never held anything, and only a log warning said so.
The reserve is now clamp(5% of the disk, 2 GB, 10 GB). It is there to
keep the cache from filling the disk, not to keep a share of a large
disk free: 10 GB leaves the system room to work on any disk, a small
disk still keeps 2 GB, and a 100 GB disk keeps 5 GB as before. After
Effects has only a maximum cache size and no reserve; a clamp keeps
the floor for small disks, where a fixed 10 GB would take most of the
space.
Writes the limit refuses cost no work: DiskCache::accepts_writes (one
atomic read) is checked before a frame is converted (put_disk_frame)
and before frames and layers are compressed (put_frame, put_frame_f16,
put_layer). The frame workers spent about 8 ms per frame and 14 ms per
layer on encodes that were then refused. persist_missing returns at
once at limit 0 instead of converting the RAM frames on every idle pass.
Settings > Disk shows the limit in effect in MB under Maximum Disk
Cache Size, with a note when free disk space lowers it
(settings.disk.cacheLimit).
Reload Footage empties the RAM preview, but an idle pass of
persist_missing may already hold a frame from before the reload. It
took the cache's drop generation when it ran, after the drop, so the old
pixels could be written back and, with the file's size and time
unchanged, served again after a restart.
Each RAM frame now keeps the disk cache its render started with and
that cache's drop generation then. persist_missing writes a frame only
to that cache, with that generation, and skips it once one of its files
was dropped since; a frame rendered without that cache is not written
from there.
Tests use tempfile directories (the layer drop test, the frame_files
folders under target/).
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
- A reload while the disk cache is off is kept on the session
(pending_disk_drops) and applied when the cache is switched on, before
anything is read from it.
- Each render takes the cache's drop generation before it reads (frame
worker; layer cache at the miss). An entry listing a file dropped after
that is refused under the queue's lock, so a render that was under way
during the reload can't store pixels from before it. Such a frame is
shown with an incomplete file list, so persist_missing skips it too.
The per-file record is bounded (past it, everything older is refused).
- An entry read while its drop was pending is a miss even when the
writer ends the sweep between the read and the check (a stale hit
found under load): the pending drops and the generation are taken
before the entry is read.
- Test: a reopened project serves its frame from disk with no source file
opened or decoded.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
An empty first paragraph draws no glyph, but in a box its face sets the
first baseline that places every later line. The read list took faces only
from glyphs, so it could be complete without that file. Note each style
run's resolved face as well.
The font-reads and confine tests use tempfile::tempdir(): a fresh
directory per run, removed on panic too.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
- Buffers made under `Renderer::recorded` (layer content, a Time effect's input, an adjustment
layer's footprint) evaluate their masks, shapes and effects with the context that notes into
the buffer's own read log, so a file an expression reads (`sampleImage`, also at shutter times
mask motion blur adds and the cache key doesn't see) is in the buffer's files.
- A styled layer served from the cache lists the files of the cached body and passes too, so
the buffers made of it (flattened, blending space) don't get a complete list when one of them
came with an incomplete one.
- A character put in by Character Offset or Character Value without a relayout notes the font
it is drawn with; a fallback face (or none) leaves the list incomplete.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
A mask with Mask Motion Blur On blurs even when the layer's own switch is off,
as long as the render's gate is open (Render Settings motion blur, and with
Switches Affect Nested Comps the precomp layers above). The key held the
layer's own motion blur state only, so a buffer blurred with the gate open was
reused with it closed (and the other way round), also from the disk cache.
Masked layer, input and footprint keys now tell a closed gate apart.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
A layer whose effect reads another layer (Gradient Wipe, Set Matte, Blend…) gets
that layer drawn by its own renderer. Through a precomp layer, Switches Affect
Nested Comps, the switches inherited from the precomp layers above and motion
blur on change those pixels, but the key held only the layers' own switches: a
buffer made with the setting on was reused (from memory or the disk cache) with
it off. Such layers now derive their key with what the renderer passes down.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Layer entries share the frame entries' file list layout, which now stores the
full i128 modification time: the layer entry format version goes to
layer-entry-files-2. The module doc names the font files text is drawn with
among an entry's source files, and what keeps a list incomplete.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
A frame entry's file list stores a file's modification time as i128 nanoseconds
since 1970 (negative before), as the file stamps now keep it; the frame entry
format version goes to frame-entry-files-2 so entries in the old layout are not
read.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
EvalCtx carries the render's read log. A sampleImage render records its footage
reads, keeps them with its per-thread cached buffer and notes them in the
evaluating render's log on every use. Text notes the font files it is drawn with,
with the identity their bytes were read with; a family that isn't installed, a
fallback or missing glyph, or a font from memory leaves the list incomplete.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
LayerCache::insert returns the files of the buffer it keeps, and Renderer::keep
notes them in the render's log and returns them, so a render that uses another
worker's buffer lists that buffer's files (a file changed between the two reads
then has two identities and the list is incomplete).
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
A file's modification time was nanoseconds since 1970 as u64: a time before 1970
read as "no time" (two such files of one size looked alike) and times after 2554
were truncated. It is now i128 nanoseconds, negative before the epoch; None only
means the file system has no time. The content-key hash writes a presence tag and
the full value.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
File > Reload Footage now deletes the frame and layer entries whose file
lists name the reloaded item's files (DiskCache::drop_files), so a file
replaced by one with the same size and modification time, which the
check on hit can't tell apart, is read again. The index knows keys, not
files: the writer thread reads the files section at the start of each
frame and layer entry (not the pixels) after the writes queued before
it, and deletes the entries that list one of the files. Until it is
done, an entry made of one of them is a miss and frames aren't linked to
new keys. The entries are gone for good, so they don't come back after a
restart. Automatic reloads don't drop anything: they follow a changed
stamp, which the check on hit catches. The browser needs nothing (its
file identities are content hashes).
Removed: disk_cache::seal, which steps 2 and 3 left without callers (the
tests use seal_format). Updated the module, seal_format and forget_media
docs, and docs/architecture.md / docs/web.md describe the final design:
what is cached, keys from memory, file lists checked on hit, nothing
scans the project, incomplete lists stay in memory, Reload Footage drops
entries, edits keep the frames they can't change.
Tests: render unit tests (same size and time passes the check but not
the drop; other files' entries stay; an entry queued before the drop is
dropped; a layer entry too; written again afterwards it is used; the
drop survives a restart; a pending drop is a miss), and an engine test
through file.reloadFootage.
Closes#3184. Part of #1492.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
With an expression anywhere in the project, every comp's disk key hashed
every item of the project, so any edit (another comp, an unused footage
item) threw away every comp's frames on disk. The key now covers what the
comp can draw plus what the expressions among it can reach
(Project::pixel_reach):
- without expressions: the items the comp draws, without silent layers,
plus the footage its precomp layers swap in (Media Replacement);
- with expressions: every layer of the comps they reach, their markers,
the comps and footage they name with string literals (comp("Name"),
footage("Name")) together with which items have those names now, and
the footage named like a reached source (its data is read by name);
- the whole project when an expression computes a name, uses the object
model's constructors or internals, dynamic code, computed keys or
writes, or text the scanner can't read for sure (regex literals,
template strings, escapes): expression_reach errs towards reaching more.
Markers count only where an expression can read them (#1083). Memory
only, no file is looked at.
Tests: scanner and reach unit tests in the project crate; engine tests
for the key (own-comp expressions keep the key through edits elsewhere,
comp("Other") follows Other and not a third comp, a second comp taking
the name counts, a computed name counts every item, markers read from
another comp); a ui-egui test that the disk frames outside an expression
layer are carried when the comp it names changes.
Part of #3184. Part of #1492.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Part of #3184 (step 3 of 4).
- A frame-blended footage frame's layer-cache key now hashes the
sequence's file list: with no project-wide salt, two projects whose
items share an id and a first frame must not share its disk entry.
- Test: a frame worker syncing, patching and rendering a project with an
unused 5000-frame sequence asks its file hook only about the file its
buffer reads (the salt asked about every file at every sync).
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Part of #3184 (step 3 of 4).
Layer buffers on disk (and in the browser's layer store) now carry the
files they were made of, like frame entries since step 2, and are checked
against exactly those files when used. The project-wide footage salt is
gone: nothing stamps every footage file any more.
- Layer entry format 4: the buffer's EntryFiles, then the pixels. A hit
checks only the listed files (metadata, or the VirtualFileId hook for
files from memory; Missing must still be missing); a change, a damaged
entry or the old format 0 is a miss and the entry is deleted, so the
re-rendered buffer replaces it. A hit reports its file list, so frames
made of buffers from disk are complete and get stored again.
- Buffers whose files can't all be named are not written.
- Layer disk keys: layer_disk_key = hash of the layer entry version, the
renderer version and the layer cache key (which names the footage items
with their paths and settings, from memory).
- PrefetchStore checks on use; an entry made of changed files is dropped
and forgotten, so the new buffer is queued over it. FrameServer passes
its virtual-file hook to its layer cache.
- Removed: footage_salt(_with), file_stamp, footage_stamp,
set_disk_salt, set_store_salt, Session::refresh_disk_salt,
poll_disk_salt, footage_fingerprint, disk_salt, disk_salt_background,
disk_salt_job, DiskSaltJob, the UI's per-frame poll, the salt in
FrameServer and in the availability worker (with its cache_enabled
plumbing). The disk cache is attached as soon as it is configured.
- Docs: architecture.md, web.md.
Tests: layer entries check their files (size, time, missing/back,
folder, damaged, old format, incomplete); virtual files; prefetch store;
media tests with a real pool across restarts (only the changed file is
read, projects with the same item ids never share an entry, missing,
unreadable and damaged never serve stale buffers); engine tests that the
cache is attached at once and edits do no file work (#1926, #3106).
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* 3D: Orientation and X/Y/Z Rotation turn Z first, keyed Orientation slerps, as After Effects
After Effects composes a 3D layer's (and a camera's) Orientation and its X/Y/Z
Rotation as Rx * Ry * Rz each, Orientation before the axis rotations; EffectCraft
used Rz * Ry * Rx. Measured on synthetic AE 2026 cases: Orientation [10,20,30]
(488) was 5.2 % of the frame off and now matches to the anti-aliased edge (0.03 %);
X/Y/Z Rotation 10/20/30 (800), Orientation + X Rotation (801) and one-node
cameras (804, 805) likewise.
Keyed Orientation moves along the shortest arc between the keys (quaternion
slerp, eased in time, angles written in [0, 360)): keys [0,0,0] -> [10,20,30]
read back [6.2643, 9.3531, 15.2190] half-way where EffectCraft gave [5,10,15];
[0,0,0] -> [60,80,40] linear and eased match AE's read-backs within 0.002 deg.
lookAt() returns AE's angles (z axis on the target, x axis level; two AE
read-backs within 1e-3 deg). The camera tracker, VR editor, Look At and orbit
commands use the new decomposition.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Keyframes: a linear side next to an eased side has 16.67 % influence, as After Effects
In a segment that is Bezier on one side and linear on the other, the linear
side keeps the segment's average speed, but with the 16.67 % influence After
Effects shows for linear keys in the Keyframe Velocity dialog (and reports to
scripts), not 33.3 %. Measured on an After Effects 2026 time-remap render (a
square at x = 50 + 455 * remap): out of a key at 2 s (3.5, speed 0, influence
50 %) into a linear key at 4 s (0.5), AE plays 3.290 at 2.5 s and 2.657 at
3 s; EffectCraft played 3.308 and 2.629 (8 and 13 px off), now the same
square positions to the pixel.
LINEAR_SIDE_INFLUENCE is used by evaluation (scalar, per-dimension, paths and
spatial), side_ease (Graph Editor, velocity dialog, keyIn/OutTemporalEase) and
the Lottie export, so exported easing plays as EffectCraft does. Segments
linear on both sides stay straight lines.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Timewarp: retime the layer's source without the effects above it, as After Effects
After Effects' Timewarp reads the layer's source (with its masks) at the
retimed times and ignores the effects applied before it: a red solid with a
Gradient Ramp and then Timewarp (Speed 25) renders as the red solid in AE
2026 (EXPORTER e2 read-back). EffectCraft retimed the layer with its
effects (mean difference 127.5/255 over the comp), now identical (0, CPU and
GPU). Echo, Posterize Time and the other time effects keep reading the
effects before them, as measured before.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Image sequences: a gap in the numbering holds the previous frame, as After Effects
After Effects 2026 shows the last existing file across a gap in a sequence's
numbering (case 860: files 1, 2, 4, 5 show frame 2 at frame 3; VERIFY
read-back). EffectCraft drew colour bars there. The media pool now holds the
previous file (Footage::sequence_file_held); colour bars remain only where no
file precedes the frame. Missing-frame reports on import are unchanged.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Review: keyed Orientation uses LINEAR_SIDE_INFLUENCE for linear sides; real NaN assert
evaluate_orientation still gave a linear side (and the unreachable missing-key fallback)
1/3 influence while segment_value, side_ease and the Lottie export use
LINEAR_SIDE_INFLUENCE (1/6), so a keyed Orientation next to an eased key moved on a
different curve than every other property (CodeRabbit on #1876). New test:
orientation_linear_side_next_to_an_eased_side_matches_a_scalar (both directions).
The always-true NaN assert in keyed_orientation_slerps_as_after_effects now checks that
a non-finite key comes back as given; Property::value_at says why the match_id
"orientation" routing is safe.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Format keyframe orientation test (cargo fmt)
Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>
* Move the image-sequence gap change out of this branch
The gap change (hold the previous file instead of colour bars) reverses
#297's documented behaviour and goes to its own PR, as requested in review.
pool.rs, sequence.rs, the footage test and docs/footage.md / docs/agents.md
are back to main.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
Co-authored-by: Codex <noreply@openai.com>
Co-authored-by: FredApps <153173854+FredApps@users.noreply.github.com>
Part of #3184 (step 2). Fixes#3175: opening a comp no longer stamps every
footage file of the project before its first frame can show.
- The comp's content key (`disk_cache::comp_content_key`) is taken from the
project in memory alone: no footage or proxy file is stamped, no
`VirtualFileId` is asked. `comp_content_key_with` is gone; `frame_key`
hashes a new entry version, so entries of the earlier format are never
looked up again (LRU evicts them).
- Frame entries (formats 2 and 3) store the files the frame read
(`EntryFiles`: size and modification time as read; size and content hash
through `VirtualFileId` for files from memory; missing files), then the
pixels. Formats 0 and 1 read as misses and are deleted.
- Check on hit: `get_frame`/`get_frame_f16` look only at the listed files
(one metadata call each) on the frame worker. A changed, back or unreadable
file, or a damaged entry, is a miss: the entry is deleted and the frame
rendered and stored again.
- A frame whose file list is incomplete is shown but not stored. The RAM
preview keeps each frame's files, so `persist_missing` writes only frames
with a complete list.
- Remote frame worker: `FrameServer` records each frame's reads
(`take_files`); the web worker stores them with the entry and the page
checks them through the file table before using it. The browser's media
epoch existed only for the old key and is removed. Export does not use
frame entries.
- The cache indicator still only asks whether an entry exists.
Tests: entry format round trip and damage, the check per file, and in the
viewer: a changed file re-renders exactly its frames (and a reopen reads the
rest from disk); a frame checks only its own files in a project with a large
unused sequence and the key looks at no file; missing, unreadable files and
damaged entries never serve a stale frame.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Part of #3184 (step 1): renders now report which footage files they read,
each with its identity (size and modification time) as read. Nothing uses
the list yet: images, cache keys and cache behaviour are unchanged.
- render: `reads` module with `FileStamp`, `ReadFile`, `ReadFiles` (sorted,
deduplicated, bounded; marked incomplete when it can't vouch for every
file) and the thread-safe `ReadLog`. `Renderer::reads` collects a frame's
files; `FootageSource::recording` lets a source note what it reads.
`file_stamp` uses the same identity.
- Layer cache entries keep the files their buffer was made of and report
them on every hit; derived entries (styles, blend space, flattened) keep
their base's. Buffers from the disk cache or the browser store don't know
their files yet and mark the list incomplete.
- Media pool: every file read notes its identity, taken from the file it
opens. Decoded frames, opened movies, GIFs, models and EXR channels keep
it with the cache entry, so a frame served from memory reports its file
without touching the disk.
- Viewer frame worker collects each frame's list and carries it to where
the disk entry is written (step 2 stores it).
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Viewer exposure on the full float range of 32 bpc frames (#2797)
32 bpc viewer frames on the desktop are rendered without the HDR step (skip_hdr_step,
#2916) and kept as half floats in the RAM preview. A display pass on egui-wgpu's device
turns each frame into one RGBA8 texture with mips per viewer, in this order: decode,
exposure in linear light, Compand / Tone Map, encode, display colour, Show Channel,
rounding. Before, exposure was an 8-bit lookup applied after tone mapping, clamping and
the display conversion, so -2 EV could not bring values above 1.0 back.
- engine: viewer::DisplayPass describes the pass as data; its pixel() is the CPU
fallback (no device) and the shader's reference. It replaces exposure_lut /
display_transform. FrameEncoding records a frame's curve and the HDR step it still
needs. 32 bpc snapshots are taken without the HDR step; snapshot_rgba8 applies it.
- ui-egui: FrameImage::CpuF16 (half crate, F16C at run time), byte accounting at 8 bytes
a pixel in the cache and the prefetch estimates; display_gpu.rs + display_gpu.wgsl;
main viewer, snapshot and passive viewers draw through the pass; the 8-bit image other
panels read is made on demand with the HDR step; the Info panel shows float values.
- Half-float frames are not written to the disk cache yet.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Viewer display pass: f16 disk cache entries, window-device gating, review fixes
- Disk cache: half-float frame entries (format byte in the entry header, byte planes +
LZ4); 8-bit entries keep format 0 and stay valid. 32 bpc viewer frames are written and
read again, and the timeline's disk bar sees them. A damaged half-float entry is
deleted.
- The display pass runs on the window's egui-wgpu device, with or without the GPU
compositor (still building, failed, GL fallback). Its pipelines are made inside error
scopes; a backend that rejects them gets the CPU pass instead of a blank viewer.
- A new LUT of the same size (another ICC profile, Preserve RGB, another display) runs
the pass again.
- f32 to f16: one pass per L1-sized block, the NaN / infinity fix-up on the bits, no
fill of the buffer (4K: 4.7 ms, as the 8-bit conversion).
- Mips of odd-sized levels include the last column / row; the snapshot's half floats
and texture go with the snapshot; no placeholder texture ids; u64 size checks.
- Tests: LUT profiles and negative values against the shader, Bake reruns, the passive
viewer's colour, f16 disk round trips; exact comparisons allow 1 LSB on software
rasterizers. Docs: the display pass and the f16 disk entries in architecture.md.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Viewer f16 disk-cache test: temp dir removed on failure too, wait for the queued disk write
Review points: the test's directory was only removed by its last statement
(now tempfile::TempDir), and the frame is released before its disk write is
queued, so flush() could return early (now waits for the entry).
Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>
* Viewer: oversized half-float frames use the CPU display pass, so exposure/HDR come before the averaging down
Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>
* Viewer: fmt and a debug assert for the half-float upload path
Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>
* Disk cache: persist_missing also writes half-float frames
Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>
* Passive viewer: oversized half-float frames take the CPU display pass instead of leaving a stale texture
Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* EXR export: write the output space's chromaticities attribute (#3037)
Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>
* EXR chromaticities: tests for unmanaged and PQ ProEXR, every space once
Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>
* EXR export: note why the comp background is added before decoding (review point)
CodeRabbit asked to convert Comp.background to the output space before
compositing. Every output path (Image::to_rgba8_over) adds the background to
the output-encoded frame as it is, so the EXR now matches the other outputs;
converting would make the EXR colour differ from the PNG of the same comp.
Comment only.
Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>
* Format the merged code with rustfmt
Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Sonnet 5.5 <noreply@anthropic.com>