diff --git a/Cargo.lock b/Cargo.lock index 4afd5b8c4..56e5fbf5f 100644 --- a/Cargo.lock +++ b/Cargo.lock @@ -1266,6 +1266,7 @@ dependencies = [ name = "deckcraft-geom" version = "0.19.0" dependencies = [ + "craft-drawingml", "kurbo", "serde", ] diff --git a/crates/geom/Cargo.toml b/crates/geom/Cargo.toml index b648d9e87..f0e6d13f6 100644 --- a/crates/geom/Cargo.toml +++ b/crates/geom/Cargo.toml @@ -9,5 +9,6 @@ description = "DeckCraft geometry: units (EMU/pt), transforms, preset shape gene workspace = true [dependencies] +craft-drawingml = { workspace = true } kurbo = { workspace = true } serde = { workspace = true } diff --git a/crates/geom/src/lib.rs b/crates/geom/src/lib.rs index a08bed987..5a302f24f 100644 --- a/crates/geom/src/lib.rs +++ b/crates/geom/src/lib.rs @@ -7,39 +7,14 @@ #![forbid(unsafe_code)] pub mod morph; -pub mod preset; pub mod squircle; -pub mod warp; pub use kurbo::{Affine, BezPath, PathEl, Point, Rect, Shape as KurboShape, Size, Vec2}; +// Placement, units and preset and warp geometry are DrawingML's, shared in craft-libs +// (`craft_drawingml`, craft-libs#778 and #792). +pub use craft_drawingml::{EMU_PER_CM, EMU_PER_IN, EMU_PER_PT, Xfrm, emu_to_pt, group_child_affine, preset, pt_to_emu, warp}; use serde::{Deserialize, Serialize}; -/// EMU per point. -pub const EMU_PER_PT: f64 = 12_700.0; -/// EMU per inch. -pub const EMU_PER_IN: f64 = 914_400.0; -/// EMU per centimetre. -pub const EMU_PER_CM: f64 = 360_000.0; - -pub fn emu_to_pt(emu: i64) -> f64 { - emu as f64 / EMU_PER_PT -} - -/// Points to EMU, rounded. Non-finite input becomes 0; huge values saturate. -pub fn pt_to_emu(pt: f64) -> i64 { - if !pt.is_finite() { - return 0; - } - let v = (pt * EMU_PER_PT).round(); - if v >= i64::MAX as f64 { - i64::MAX - } else if v <= i64::MIN as f64 { - i64::MIN - } else { - v as i64 - } -} - /// Display units for measurements (inches on US English systems, centimetres elsewhere). #[derive(Clone, Copy, Debug, Default, PartialEq, Eq, Serialize, Deserialize)] #[serde(rename_all = "camelCase")] @@ -101,73 +76,6 @@ fn split_number(t: &str) -> Option<(f64, &str)> { Some((n, t.get(end..).unwrap_or(""))) } -/// A shape's placement on its slide (or in its group's child space): offset, extent, rotation -/// (degrees clockwise) and flips. Rotation and flips are about the centre. -#[derive(Clone, Copy, Debug, Default, PartialEq, Serialize, Deserialize)] -#[serde(default, rename_all = "camelCase")] -pub struct Xfrm { - pub x: f64, - pub y: f64, - pub w: f64, - pub h: f64, - #[serde(skip_serializing_if = "is_zero")] - pub rot: f64, - #[serde(skip_serializing_if = "std::ops::Not::not")] - pub flip_h: bool, - #[serde(skip_serializing_if = "std::ops::Not::not")] - pub flip_v: bool, -} - -fn is_zero(v: &f64) -> bool { - *v == 0.0 -} - -impl Xfrm { - pub fn new(x: f64, y: f64, w: f64, h: f64) -> Self { - Xfrm { x, y, w, h, ..Default::default() } - } - pub fn rect(&self) -> Rect { - Rect::new(self.x, self.y, self.x + self.w, self.y + self.h) - } - pub fn center(&self) -> Point { - Point::new(self.x + self.w / 2.0, self.y + self.h / 2.0) - } - /// Local shape space (0..w, 0..h) → parent space, applying flips and rotation about the centre. - pub fn affine(&self) -> Affine { - let c = Vec2::new(self.w / 2.0, self.h / 2.0); - let sx = if self.flip_h { -1.0 } else { 1.0 }; - let sy = if self.flip_v { -1.0 } else { 1.0 }; - Affine::translate(Vec2::new(self.x, self.y) + c) - * Affine::rotate(self.rot.to_radians()) - * Affine::scale_non_uniform(sx, sy) - * Affine::translate(-c) - } - /// Axis-aligned bounds of the rotated box in parent space. - pub fn bounds(&self) -> Rect { - let a = self.affine(); - let pts = [Point::new(0.0, 0.0), Point::new(self.w, 0.0), Point::new(self.w, self.h), Point::new(0.0, self.h)].map(|p| a * p); - let mut r = Rect::from_points(pts[0], pts[1]); - r = r.union_pt(pts[2]).union_pt(pts[3]); - r - } - /// True when no dimension is NaN/inf. - pub fn is_finite(&self) -> bool { - [self.x, self.y, self.w, self.h, self.rot].iter().all(|v| v.is_finite()) - } - /// Rotation normalised to 0..360. - pub fn rot_norm(&self) -> f64 { - let r = self.rot.rem_euclid(360.0); - if r >= 360.0 { 0.0 } else { r } - } -} - -/// Maps a group's child coordinate space (`ch_off`, `ch_ext`) onto the group's own box. -pub fn group_child_affine(group: &Xfrm, ch: Rect) -> Affine { - let sx = if ch.width().abs() > 1e-9 { group.w / ch.width() } else { 1.0 }; - let sy = if ch.height().abs() > 1e-9 { group.h / ch.height() } else { 1.0 }; - group.affine() * Affine::scale_non_uniform(sx, sy) * Affine::translate(-ch.origin().to_vec2()) -} - /// Distance from `p` to the segment `a`–`b`. pub fn dist_to_segment(p: Point, a: Point, b: Point) -> f64 { let ab = b - a; diff --git a/crates/geom/src/preset.rs b/crates/geom/src/preset.rs deleted file mode 100644 index 3e3b5af5a..000000000 --- a/crates/geom/src/preset.rs +++ /dev/null @@ -1,24 +0,0 @@ -//! Preset shape geometry. -//! -//! Each preset is identified by its Office Open XML name (`rect`, `roundRect`, `rightArrow`…) so -//! files round-trip, but every outline here is our own construction in Rust: we re-derive the shapes -//! from what they look like and from the meaning of their adjust values, not from any reference -//! geometry table. Adjust values use the file convention: ratios in 1/100 000 of the shorter side (or -//! of the width/height), angles in 1/60 000 degree. - -use kurbo::{Arc, BezPath, Point, Rect, Vec2}; -use serde::{Deserialize, Serialize}; - -mod build; -mod builder; -mod catalog; -mod shapes; - -pub use build::build; -use builder::{Corner, Dir, Pb, corner_rect, fill, fill_eo, fill_only, mid_sites, orient, shade, simple, stroke_only, vis}; -pub use catalog::{CATALOG, Category, FillMode, Geometry, Handle, PresetInfo, SubPath, info, is_line_like, mitred_by_default}; - -mod extra; - -#[cfg(test)] -mod tests; diff --git a/crates/geom/src/preset/build.rs b/crates/geom/src/preset/build.rs deleted file mode 100644 index 95b833efd..000000000 --- a/crates/geom/src/preset/build.rs +++ /dev/null @@ -1,1204 +0,0 @@ -use super::builder::{ - Corner, Dir, Pb, arrow, corner_rect, double_arrow, ellipse_sites, fill, fill_eo, fill_only, len_thick, mid_sites, orient, polygon_regular, shade, - simple, spec_pts, star, star_text_rect, stroke_only, tip_handle, vis, -}; -use super::catalog::{FillMode, Geometry, Handle, info}; -use super::shapes::{action_button, cloud, math, ribbon, scroll, wedge_rect}; -use super::{Arc, BezPath, Point, Rect, Vec2, extra}; - -/// Size and adjust values shared by every preset-shape builder. -struct Ctx<'a> { - name: &'a str, - w: f64, - h: f64, - adj: &'a [f64], - defaults: &'a [f64], -} - -impl Ctx<'_> { - /// Adjust value `i`: the caller's value, else the preset default, else 0 (non-finite values become 0). - fn a(&self, i: usize) -> f64 { - let v = self.adj.get(i).copied().or_else(|| self.defaults.get(i).copied()).unwrap_or(0.0); - if v.is_finite() { v } else { 0.0 } - } -} - -/// Builds the geometry for preset `name` at size `w`×`h` with adjust values `adj` (missing -/// values use the preset's defaults). Unknown names return `None`; the caller falls back to `rect`. -pub fn build(name: &str, w: f64, h: f64, adj: &[f64]) -> Option { - if !(w.is_finite() && h.is_finite()) { - return None; - } - let defaults = info(name).map(|i| i.defaults).unwrap_or(&[]); - let c = Ctx { name, w: w.max(0.0), h: h.max(0.0), adj, defaults }; - rect_and_triangle_shapes(&c) - .or_else(|| polygon_and_symbol_shapes(&c)) - .or_else(|| bracket_and_arrow_shapes(&c)) - .or_else(|| flowchart_and_star_shapes(&c)) - .or_else(|| callout_wave_and_connector_shapes(&c)) - .or_else(|| extra::build(name, c.w, c.h, &|i| c.a(i))) -} - -fn rect_and_triangle_shapes(c: &Ctx) -> Option { - let name = c.name; - let w = c.w; - let h = c.h; - let ss = c.w.min(c.h); - let full = Rect::new(0.0, 0.0, c.w, c.h); - let a = |i: usize| c.a(i); - let mut b = Pb::new(); - let g = match c.name { - "rect" | "textBox" | "flowChartProcess" => simple(corner_rect(w, h, [Corner::Square; 4]), full, w, h), - "actionButtonBlank" - | "actionButtonBackPrevious" - | "actionButtonForwardNext" - | "actionButtonBeginning" - | "actionButtonEnd" - | "actionButtonHome" - | "actionButtonInformation" - | "actionButtonReturn" - | "actionButtonMovie" - | "actionButtonDocument" - | "actionButtonSound" - | "actionButtonHelp" => action_button(name, w, h), - "roundRect" => { - let v = a(0).clamp(0.0, 50000.0); - let r = ss * v / 100000.0; - let mut g = simple(corner_rect(w, h, [Corner::Round(r); 4]), full.inset(-r * 0.29289), w, h); - g.handles.push(Handle::new(0, Point::ZERO, Vec2::new(ss / 100000.0, 0.0), v, 0.0, 50000.0)); - g - } - "flowChartAlternateProcess" => simple(corner_rect(w, h, [Corner::Round(ss / 6.0); 4]), full.inset(-ss / 6.0 * 0.29289), w, h), - "snip1Rect" => { - let v = a(0).clamp(0.0, 50000.0); - let d = ss * v / 100000.0; - let mut g = simple( - corner_rect(w, h, [Corner::Square, Corner::Snip(d), Corner::Square, Corner::Square]), - Rect::new(0.0, d / 2.0, w - d / 2.0, h), - w, - h, - ); - g.handles.push(Handle::new(0, Point::new(w, 0.0), Vec2::new(-ss / 100000.0, 0.0), v, 0.0, 50000.0)); - g - } - "snip2SameRect" => { - let (d1, d2) = (ss * a(0).clamp(0.0, 50000.0) / 1e5, ss * a(1).clamp(0.0, 50000.0) / 1e5); - simple(corner_rect(w, h, [Corner::Snip(d1), Corner::Snip(d1), Corner::Snip(d2), Corner::Snip(d2)]), full.inset(-d1.max(d2) / 2.0), w, h) - } - "snip2DiagRect" => { - let (d1, d2) = (ss * a(0).clamp(0.0, 50000.0) / 1e5, ss * a(1).clamp(0.0, 50000.0) / 1e5); - simple(corner_rect(w, h, [Corner::Snip(d1), Corner::Snip(d2), Corner::Snip(d1), Corner::Snip(d2)]), full.inset(-d1.max(d2) / 2.0), w, h) - } - "snipRoundRect" => { - let (r, d) = (ss * a(0).clamp(0.0, 50000.0) / 1e5, ss * a(1).clamp(0.0, 50000.0) / 1e5); - simple(corner_rect(w, h, [Corner::Round(r), Corner::Snip(d), Corner::Square, Corner::Square]), full.inset(-r.max(d) / 2.0), w, h) - } - "round1Rect" => { - let r = ss * a(0).clamp(0.0, 50000.0) / 1e5; - simple(corner_rect(w, h, [Corner::Square, Corner::Round(r), Corner::Square, Corner::Square]), full.inset(-r * 0.29289), w, h) - } - "round2SameRect" => { - let (r1, r2) = (ss * a(0).clamp(0.0, 50000.0) / 1e5, ss * a(1).clamp(0.0, 50000.0) / 1e5); - simple( - corner_rect(w, h, [Corner::Round(r1), Corner::Round(r1), Corner::Round(r2), Corner::Round(r2)]), - full.inset(-r1.max(r2) * 0.29289), - w, - h, - ) - } - "round2DiagRect" => { - let (r1, r2) = (ss * a(0).clamp(0.0, 50000.0) / 1e5, ss * a(1).clamp(0.0, 50000.0) / 1e5); - simple( - corner_rect(w, h, [Corner::Round(r1), Corner::Round(r2), Corner::Round(r1), Corner::Round(r2)]), - full.inset(-r1.max(r2) * 0.29289), - w, - h, - ) - } - "ellipse" | "flowChartConnector" => { - let mut g = - simple(b.ellipse(w / 2.0, h / 2.0, w / 2.0, h / 2.0).take(), Rect::new(w * 0.14645, h * 0.14645, w * 0.85355, h * 0.85355), w, h); - g.sites = ellipse_sites(w, h); - g - } - "triangle" | "flowChartExtract" => { - let v = if name == "triangle" { a(0).clamp(0.0, 100000.0) } else { 50000.0 }; - let ax = w * v / 100000.0; - let mut g = simple(b.poly(&[(0.0, h), (ax, 0.0), (w, h)]).take(), Rect::new(ax / 2.0, h / 2.0, (ax + w) / 2.0, h), w, h); - g.sites = vec![ - Point::new(ax, 0.0), - Point::new(ax / 2.0, h / 2.0), - Point::new(0.0, h), - Point::new(w / 2.0, h), - Point::new(w, h), - Point::new((ax + w) / 2.0, h / 2.0), - ]; - if name == "triangle" { - g.handles.push(Handle::new(0, Point::ZERO, Vec2::new(w / 100000.0, 0.0), v, 0.0, 100000.0)); - } - g - } - "flowChartMerge" => simple(b.poly(&[(0.0, 0.0), (w, 0.0), (w / 2.0, h)]).take(), Rect::new(w / 4.0, 0.0, w * 0.75, h / 2.0), w, h), - "rtTriangle" => { - simple(b.poly(&[(0.0, 0.0), (0.0, h), (w, h)]).take(), Rect::new(w / 12.0, h * 7.0 / 12.0, w * 7.0 / 12.0, h * 11.0 / 12.0), w, h) - } - "parallelogram" | "flowChartInputOutput" => { - let v = if name == "parallelogram" { a(0).clamp(0.0, 100000.0 * w / ss.max(1e-9)) } else { 20000.0 * w / ss.max(1e-9) }; - let off = ss * v / 100000.0; - let mut g = simple( - b.poly(&[(0.0, h), (off, 0.0), (w, 0.0), (w - off, h)]).take(), - Rect::new(off / 2.0 + off * 0.2, h * 0.08, w - off / 2.0 - off * 0.2, h * 0.92), - w, - h, - ); - if name == "parallelogram" { - g.handles.push(Handle::new(0, Point::ZERO, Vec2::new(ss / 100000.0, 0.0), v, 0.0, 100000.0 * w / ss.max(1e-9))); - } - g - } - "trapezoid" => { - let v = a(0).clamp(0.0, 50000.0 * w / ss.max(1e-9)); - let off = ss * v / 100000.0; - let mut g = - simple(b.poly(&[(0.0, h), (off, 0.0), (w - off, 0.0), (w, h)]).take(), Rect::new(off * 0.66, h * 0.2, w - off * 0.66, h), w, h); - g.handles.push(Handle::new(0, Point::ZERO, Vec2::new(ss / 100000.0, 0.0), v, 0.0, 50000.0 * w / ss.max(1e-9))); - g - } - "flowChartManualOperation" => { - simple(b.poly(&[(0.0, 0.0), (w, 0.0), (w * 0.8, h), (w * 0.2, h)]).take(), Rect::new(w * 0.2, 0.0, w * 0.8, h), w, h) - } - "diamond" | "flowChartDecision" => simple( - b.poly(&[(w / 2.0, 0.0), (w, h / 2.0), (w / 2.0, h), (0.0, h / 2.0)]).take(), - Rect::new(w / 4.0, h / 4.0, w * 0.75, h * 0.75), - w, - h, - ), - "flowChartSort" => { - let d = b.poly(&[(w / 2.0, 0.0), (w, h / 2.0), (w / 2.0, h), (0.0, h / 2.0)]).take(); - let line = Pb::new().m(0.0, h / 2.0).l(w, h / 2.0).take(); - Geometry { - paths: vec![fill(d), stroke_only(line)], - text_rect: Rect::new(w / 4.0, h / 4.0, w * 0.75, h * 0.75), - handles: vec![], - sites: mid_sites(w, h), - } - } - _ => return None, - }; - Some(g) -} - -fn polygon_and_symbol_shapes(c: &Ctx) -> Option { - let name = c.name; - let w = c.w; - let h = c.h; - let ss = c.w.min(c.h); - let full = Rect::new(0.0, 0.0, c.w, c.h); - let a = |i: usize| c.a(i); - let mut b = Pb::new(); - let g = match c.name { - "pentagon" => simple(b.poly(&polygon_regular(5, w, h, -90.0)).take(), Rect::new(w * 0.2, h * 0.27, w * 0.8, h * 0.9), w, h), - "heptagon" => simple(b.poly(&polygon_regular(7, w, h, -90.0)).take(), Rect::new(w * 0.16, h * 0.2, w * 0.84, h * 0.86), w, h), - "decagon" => simple(b.poly(&polygon_regular(10, w, h, 0.0)).take(), Rect::new(w * 0.1, h * 0.17, w * 0.9, h * 0.83), w, h), - "dodecagon" => simple(b.poly(&polygon_regular(12, w, h, 15.0)).take(), Rect::new(w * 0.13, h * 0.13, w * 0.87, h * 0.87), w, h), - "hexagon" | "flowChartPreparation" => { - let v = if name == "hexagon" { a(0).clamp(0.0, 50000.0 * w / ss.max(1e-9)) } else { 20000.0 * w / ss.max(1e-9) }; - let off = ss * v / 100000.0; - let mut g = simple( - b.poly(&[(0.0, h / 2.0), (off, 0.0), (w - off, 0.0), (w, h / 2.0), (w - off, h), (off, h)]).take(), - Rect::new(off * 0.6, h * 0.14, w - off * 0.6, h * 0.86), - w, - h, - ); - if name == "hexagon" { - g.handles.push(Handle::new(0, Point::ZERO, Vec2::new(ss / 100000.0, 0.0), v, 0.0, 50000.0 * w / ss.max(1e-9))); - } - g - } - "octagon" => { - let v = a(0).clamp(0.0, 50000.0); - let d = ss * v / 100000.0; - let mut g = simple( - b.poly(&[(d, 0.0), (w - d, 0.0), (w, d), (w, h - d), (w - d, h), (d, h), (0.0, h - d), (0.0, d)]).take(), - full.inset(-d / 2.0), - w, - h, - ); - g.handles.push(Handle::new(0, Point::ZERO, Vec2::new(ss / 100000.0, 0.0), v, 0.0, 50000.0)); - g - } - "plus" => { - let v = a(0).clamp(0.0, 50000.0); - let d = ss * v / 100000.0; - let mut g = simple( - b.poly(&[ - (d, 0.0), - (w - d, 0.0), - (w - d, d), - (w, d), - (w, h - d), - (w - d, h - d), - (w - d, h), - (d, h), - (d, h - d), - (0.0, h - d), - (0.0, d), - (d, d), - ]) - .take(), - Rect::new(0.0, d, w, h - d), - w, - h, - ); - g.handles.push(Handle::new(0, Point::ZERO, Vec2::new(ss / 100000.0, 0.0), v, 0.0, 50000.0)); - g - } - "frame" => { - let v = a(0).clamp(0.0, 50000.0); - let t = ss * v / 100000.0; - b.poly(&[(0.0, 0.0), (w, 0.0), (w, h), (0.0, h)]); - b.poly(&[(t, t), (w - t, t), (w - t, h - t), (t, h - t)]); - let mut g = Geometry { paths: vec![fill_eo(b.take())], text_rect: full.inset(-t), handles: vec![], sites: mid_sites(w, h) }; - g.handles.push(Handle::new(0, Point::ZERO, Vec2::new(ss / 100000.0, 0.0), v, 0.0, 50000.0)); - g - } - "halfFrame" => { - let (t1, t2) = (ss * a(0).clamp(0.0, 50000.0) / 1e5, ss * a(1).clamp(0.0, 50000.0) / 1e5); - simple(b.poly(&[(0.0, 0.0), (w, 0.0), (w - t1, t1), (t2, t1), (t2, h - t2), (0.0, h)]).take(), full, w, h) - } - "corner" => { - let (t1, t2) = (ss * a(0).clamp(0.0, 100000.0) / 1e5, ss * a(1).clamp(0.0, 100000.0) / 1e5); - simple(b.poly(&[(0.0, 0.0), (t2, 0.0), (t2, h - t1), (w, h - t1), (w, h), (0.0, h)]).take(), Rect::new(0.0, h - t1, w, h), w, h) - } - "diagStripe" => { - let k = a(0).clamp(0.0, 100000.0) / 1e5; - simple(b.poly(&[(0.0, h * k), (w * k, 0.0), (w, 0.0), (0.0, h)]).take(), Rect::new(0.0, 0.0, w / 2.0, h / 2.0), w, h) - } - "plaque" => { - let v = a(0).clamp(0.0, 50000.0); - let r = ss * v / 100000.0; - b.m(0.0, r) - .arc(r, r, 90.0, -90.0) - .l(w - r, 0.0) - .arc(r, r, 180.0, -90.0) - .l(w, h - r) - .arc(r, r, 270.0, -90.0) - .l(r, h) - .arc(r, r, 0.0, -90.0) - .z(); - let mut g = simple(b.take(), full.inset(-r * 0.7), w, h); - g.handles.push(Handle::new(0, Point::ZERO, Vec2::new(ss / 100000.0, 0.0), v, 0.0, 50000.0)); - g - } - "can" | "flowChartMagneticDisk" => { - // The disk's ends are a third of its height (ECMA-376: ellipses of radius h/6). - let v = if name == "can" { a(0).clamp(0.0, 50000.0 * h / ss.max(1e-9)) } else { 100000.0 / 3.0 * h / ss.max(1e-9) }; - let eh = ss * v / 100000.0; - let r = eh / 2.0; - let body = Pb::new().m(0.0, r).l(0.0, h - r).arc(w / 2.0, r, 180.0, -180.0).l(w, r).arc(w / 2.0, r, 0.0, -180.0).z().take(); - let top = Pb::new().ellipse(w / 2.0, r, w / 2.0, r).take(); - let mut g = Geometry { - paths: vec![fill(body), shade(top, if name == "can" { FillMode::Lighten } else { FillMode::Norm })], - text_rect: Rect::new(0.0, eh, w, h - r), - handles: vec![], - sites: mid_sites(w, h), - }; - if name == "can" { - g.handles.push(Handle::new(0, Point::new(w / 2.0, 0.0), Vec2::new(0.0, ss / 100000.0), v, 0.0, 50000.0 * h / ss.max(1e-9))); - } - g - } - "flowChartMagneticDrum" => { - // ECMA-376: end ellipses of radius w/6 across. - let r = w / 6.0; - let body = Pb::new().m(r, 0.0).l(w - r, 0.0).arc(r, h / 2.0, 270.0, 180.0).l(r, h).arc(r, h / 2.0, 90.0, 180.0).z().take(); - let side = Pb::new().m(w - r, 0.0).arc(r, h / 2.0, 270.0, -180.0).take(); - Geometry { - paths: vec![fill(body), stroke_only(side)], - text_rect: Rect::new(r, 0.0, w - 2.0 * r, h), - handles: vec![], - sites: mid_sites(w, h), - } - } - "cube" => { - let v = a(0).clamp(0.0, 100000.0); - let d = ss * v / 100000.0; - let front = Pb::new().poly(&[(0.0, d), (w - d, d), (w - d, h), (0.0, h)]).take(); - let top = Pb::new().poly(&[(0.0, d), (d, 0.0), (w, 0.0), (w - d, d)]).take(); - let side = Pb::new().poly(&[(w - d, d), (w, 0.0), (w, h - d), (w - d, h)]).take(); - let mut g = Geometry { - paths: vec![fill(front), shade(top, FillMode::LightenLess), shade(side, FillMode::DarkenLess)], - text_rect: Rect::new(0.0, d, w - d, h), - handles: vec![], - sites: mid_sites(w, h), - }; - g.handles.push(Handle::new(0, Point::new(0.0, 0.0), Vec2::new(0.0, ss / 100000.0), v, 0.0, 100000.0)); - g - } - "bevel" => { - let v = a(0).clamp(0.0, 50000.0); - let d = ss * v / 100000.0; - let inner = Pb::new().poly(&[(d, d), (w - d, d), (w - d, h - d), (d, h - d)]).take(); - let top = Pb::new().poly(&[(0.0, 0.0), (w, 0.0), (w - d, d), (d, d)]).take(); - let left = Pb::new().poly(&[(0.0, 0.0), (d, d), (d, h - d), (0.0, h)]).take(); - let right = Pb::new().poly(&[(w, 0.0), (w, h), (w - d, h - d), (w - d, d)]).take(); - let bottom = Pb::new().poly(&[(0.0, h), (d, h - d), (w - d, h - d), (w, h)]).take(); - let mut g = Geometry { - paths: vec![ - fill(inner), - shade(top, FillMode::LightenLess), - shade(left, FillMode::Lighten), - shade(right, FillMode::DarkenLess), - shade(bottom, FillMode::Darken), - ], - text_rect: full.inset(-d), - handles: vec![], - sites: mid_sites(w, h), - }; - g.handles.push(Handle::new(0, Point::ZERO, Vec2::new(ss / 100000.0, 0.0), v, 0.0, 50000.0)); - g - } - "donut" => { - let v = a(0).clamp(0.0, 50000.0); - let t = ss * v / 100000.0; - b.ellipse(w / 2.0, h / 2.0, w / 2.0, h / 2.0); - b.ellipse(w / 2.0, h / 2.0, (w / 2.0 - t).max(0.0), (h / 2.0 - t).max(0.0)); - let mut g = Geometry { - paths: vec![fill_eo(b.take())], - text_rect: Rect::new(w * 0.14645, h * 0.14645, w * 0.85355, h * 0.85355), - handles: vec![], - sites: ellipse_sites(w, h), - }; - g.handles.push(Handle::new(0, Point::new(0.0, h / 2.0), Vec2::new(ss / 100000.0, 0.0), v, 0.0, 50000.0)); - g - } - "noSmoking" => { - let v = a(0).clamp(0.0, 50000.0); - let t = ss * v / 100000.0; - let (rx, ry) = ((w / 2.0 - t).max(0.0), (h / 2.0 - t).max(0.0)); - b.ellipse(w / 2.0, h / 2.0, w / 2.0, h / 2.0); - b.ellipse(w / 2.0, h / 2.0, rx, ry); - let ring = b.take(); - let th = (h).atan2(w); - let dir = Vec2::new(th.cos(), th.sin()); - let r = if rx > 0.0 && ry > 0.0 { rx * ry / ((ry * th.cos()).powi(2) + (rx * th.sin()).powi(2)).sqrt() } else { 0.0 }; - let perp = Vec2::new(-dir.y, dir.x) * (t / 2.0); - let c = Point::new(w / 2.0, h / 2.0); - let p = [c - dir * r - perp, c + dir * r - perp, c + dir * r + perp, c - dir * r + perp]; - let bar = Pb::new().poly(&p.map(|q| (q.x, q.y))).take(); - Geometry { - paths: vec![fill_eo(ring), fill(bar)], - text_rect: Rect::new(w * 0.14645, h * 0.14645, w * 0.85355, h * 0.85355), - handles: vec![Handle::new(0, Point::new(0.0, h / 2.0), Vec2::new(ss / 100000.0, 0.0), v, 0.0, 50000.0)], - sites: ellipse_sites(w, h), - } - } - "blockArc" => { - let st = a(0) / 60000.0; - let en = a(1) / 60000.0; - let t = ss * a(2).clamp(0.0, 50000.0) / 100000.0; - let mut sw = en - st; - if sw <= 0.0 { - sw += 360.0; - } - let (rx, ry) = (w / 2.0, h / 2.0); - let (irx, iry) = ((rx - t).max(0.0), (ry - t).max(0.0)); - let s0 = vis(st, rx, ry); - let e0 = vis(st + sw, rx, ry); - let mut sweep = e0 - s0; - if sweep <= 0.0 { - sweep += 360.0; - } - let si = vis(st + sw, irx, iry); - let ei = vis(st, irx, iry); - let mut isweep = ei - si; - if isweep >= 0.0 { - isweep -= 360.0; - } - let p0 = Point::new(w / 2.0 + rx * s0.to_radians().cos(), h / 2.0 + ry * s0.to_radians().sin()); - b.m(p0.x, p0.y).arc(rx, ry, s0, sweep); - let pi = Point::new(w / 2.0 + irx * si.to_radians().cos(), h / 2.0 + iry * si.to_radians().sin()); - b.l(pi.x, pi.y).arc(irx, iry, si, isweep).z(); - let mut g = simple(b.take(), full, w, h); - let c = Point::new(rx, ry); - g.handles.push(Handle::angle(0, c, rx - t / 2.0, ry - t / 2.0, a(0))); - // Thickness: slides inward from the outer edge along the end angle's ray. - let pe = Point::new(rx + rx * e0.to_radians().cos(), ry + ry * e0.to_radians().sin()); - let u = (c - pe).normalize(); - let u = if u.x.is_finite() && u.y.is_finite() { u } else { Vec2::ZERO }; - g.handles.push(Handle::new(2, pe, u * (ss / 100000.0), a(2).clamp(0.0, 50000.0), 0.0, 50000.0)); - g - } - "pie" | "chord" | "arc" => { - let (rx, ry) = (w / 2.0, h / 2.0); - let s = vis(a(0) / 60000.0, rx, ry); - let e = vis(a(1) / 60000.0, rx, ry); - let mut sw = e - s; - if sw <= 0.0 { - sw += 360.0; - } - let p0 = Point::new(rx + rx * s.to_radians().cos(), ry + ry * s.to_radians().sin()); - b.m(p0.x, p0.y).arc(rx, ry, s, sw); - let text = Rect::new(w * 0.14645, h * 0.14645, w * 0.85355, h * 0.85355); - let mut g = match name { - "pie" => { - b.l(rx, ry).z(); - simple(b.take(), text, w, h) - } - "chord" => { - b.z(); - simple(b.take(), text, w, h) - } - _ => { - let open = b.take(); - let mut f = BezPath::from_vec(open.elements().to_vec()); - f.line_to(Point::new(rx, ry)); - f.close_path(); - Geometry { paths: vec![fill_only(f), stroke_only(open)], text_rect: text, handles: vec![], sites: mid_sites(w, h) } - } - }; - let c = Point::new(rx, ry); - g.handles.push(Handle::angle(0, c, rx, ry, a(0))); - g.handles.push(Handle::angle(1, c, rx, ry, a(1))); - g - } - "teardrop" => { - let k = a(0).clamp(0.0, 200000.0) / 100000.0; - let tip = (w / 2.0 + w / 2.0 * k, h / 2.0 - h / 2.0 * k); - b.m(0.0, h / 2.0).arc(w / 2.0, h / 2.0, 180.0, 90.0); - b.q(w / 2.0 + w / 4.0 * k, 0.0, tip.0, tip.1).q(w, h / 2.0 - h / 4.0 * k, w, h / 2.0); - b.arc(w / 2.0, h / 2.0, 0.0, 180.0).z(); - simple(b.take(), Rect::new(w * 0.14645, h * 0.14645, w * 0.85355, h * 0.85355), w, h) - } - "foldedCorner" => { - let v = a(0).clamp(0.0, 50000.0); - let d = ss * v / 100000.0; - let body = Pb::new().poly(&[(0.0, 0.0), (w, 0.0), (w, h - d), (w - d, h), (0.0, h)]).take(); - let fold = Pb::new().m(w - d, h).l(w - d + d * 0.2, h - d + d * 0.2).l(w, h - d).z().take(); - Geometry { - paths: vec![fill(body), shade(fold, FillMode::DarkenLess)], - text_rect: Rect::new(0.0, 0.0, w, h - d), - handles: vec![], - sites: mid_sites(w, h), - } - } - "smileyFace" => { - let k = a(0).clamp(-4653.0, 4653.0) / 100000.0; - let face = Pb::new().ellipse(w / 2.0, h / 2.0, w / 2.0, h / 2.0).take(); - let mut eyes = Pb::new(); - eyes.ellipse(w * 0.35, h * 0.37, w * 0.05, h * 0.05); - eyes.ellipse(w * 0.65, h * 0.37, w * 0.05, h * 0.05); - let ys = h * (0.72 - k); - let smile = Pb::new().m(w * 0.22, ys).q(w / 2.0, ys + h * k * 4.0 + h * 0.0, w * 0.78, ys).take(); - Geometry { - paths: vec![fill(face), shade(eyes.take(), FillMode::DarkenLess), stroke_only(smile)], - text_rect: Rect::new(w * 0.14645, h * 0.14645, w * 0.85355, h * 0.85355), - handles: vec![], - sites: ellipse_sites(w, h), - } - } - "heart" => { - // ECMA-376 heart: two cubic curves from the notch at the top to the point. - let (dx1, dx2) = (w * 49.0 / 48.0, w * 10.0 / 48.0); - let y1 = -h / 3.0; - b.m(w / 2.0, h / 4.0) - .c(w / 2.0 + dx2, y1, w / 2.0 + dx1, h / 4.0, w / 2.0, h) - .c(w / 2.0 - dx1, h / 4.0, w / 2.0 - dx2, y1, w / 2.0, h / 4.0) - .z(); - simple(b.take(), Rect::new(w * 0.2, h * 0.25, w * 0.8, h * 0.7), w, h) - } - "lightningBolt" => { - // ECMA-376 lightningBolt, in 21600ths of the box. - let pts = spec_pts( - &[ - (8472, 0), - (12860, 6080), - (11050, 6797), - (16577, 12007), - (14767, 12877), - (21600, 21600), - (10012, 14915), - (12222, 13987), - (5022, 9705), - (7602, 8382), - (0, 3890), - ], - w, - h, - ); - simple(b.poly(&pts).take(), Rect::new(w * 8757.0 / 21600.0, h * 7637.0 / 21600.0, w * 13917.0 / 21600.0, h * 12963.0 / 21600.0), w, h) - } - "sun" => { - // ECMA-376 sun: eight triangular rays (their bases at fixed fractions of the core's - // margin) around a circle of radius 50% - adj. - let a = a(0).clamp(12500.0, 46875.0); - let g0 = 50000.0 - a; - let (g1, g2) = (g0 * 30274.0 / 32768.0, g0 * 12540.0 / 32768.0); - let (g10, g11) = ((50000.0 - g1) * 0.75, (50000.0 - g2) * 0.75); - let (g12, g13, g14) = (g10 + 3662.0, g11 + 3662.0, g11 + 12500.0); - let (g15, g16, g17, g18) = (100000.0 - g10, 100000.0 - g12, 100000.0 - g13, 100000.0 - g14); - let x = |g: f64| w * g / 100000.0; - let y = |g: f64| h * g / 100000.0; - let (ox1, oy1, ox2, oy2) = (w * 18436.0 / 21600.0, h * 3163.0 / 21600.0, w * 3163.0 / 21600.0, h * 18436.0 / 21600.0); - let (hc, vc) = (w / 2.0, h / 2.0); - b.poly(&[(w, vc), (x(g15), y(g18)), (x(g15), y(g14))]); - b.poly(&[(ox1, oy1), (x(g16), y(g13)), (x(g17), y(g12))]); - b.poly(&[(hc, 0.0), (x(g18), y(g10)), (x(g14), y(g10))]); - b.poly(&[(ox2, oy1), (x(g13), y(g12)), (x(g12), y(g13))]); - b.poly(&[(0.0, vc), (x(g10), y(g14)), (x(g10), y(g18))]); - b.poly(&[(ox2, oy2), (x(g12), y(g17)), (x(g13), y(g16))]); - b.poly(&[(hc, h), (x(g14), y(g15)), (x(g18), y(g15))]); - b.poly(&[(ox1, oy2), (x(g17), y(g16)), (x(g16), y(g17))]); - b.ellipse(hc, vc, x(g0), y(g0)); - let g7 = g0 * 23170.0 / 32768.0; - let mut g = simple(b.take(), Rect::new(x(50000.0 - g7), y(50000.0 - g7), x(50000.0 + g7), y(50000.0 + g7)), w, h); - g.handles.push(Handle::new(0, Point::new(0.0, vc), Vec2::new(w / 100000.0, 0.0), a, 12500.0, 46875.0)); - g - } - "moon" => { - // ECMA-376 moon: the outer edge is the left half of an ellipse w × h/2 centred on the - // right edge; the inner edge an arc through the corners and (adj · w, middle) of a - // larger ellipse (rx = g18, ry = dy1) whose centre lies right of that point. - let k = a(0).clamp(0.0, 87500.0) / 100000.0; - let ssf = ss.max(1e-9); - let g0 = ss * k; - let g1 = (ss - g0).max(1e-9); - let g2 = g0 * g0 / g1; - let g3 = ss * ss / g1; - let g5 = 2.0 * g3 - g2; - let g6 = g5 - g0; - let dy1 = (g5 / 2.0 - g0) * (h / 2.0) / ssf; - let (g0w, g6w) = (g0 * w / ssf, g6 * w / ssf); - let rx = (g6w - g0w) / 2.0; - let cx = g0w + rx; - b.m(w, 0.0).arc(w, h / 2.0, 270.0, -180.0); - if rx > 1e-9 && dy1 > 1e-9 { - // From the bottom-right corner back up to the top-right through (g0w, h/2). - let t0 = ((h / 2.0) / dy1).clamp(-1.0, 1.0).atan2((w - cx) / rx); - let t1 = (-(h / 2.0) / dy1).clamp(-1.0, 1.0).atan2((w - cx) / rx) + std::f64::consts::TAU; - let arc = Arc::new(Point::new(cx, h / 2.0), Vec2::new(rx, dy1), t0, t1 - t0, 0.0); - arc.to_cubic_beziers(0.05, |p1, p2, p| { - b.p.curve_to(p1, p2, p); - }); - } - b.z(); - let g12 = g0 * 9598.0 / 32768.0; - let g13 = ss - g12; - let dy4 = (ss * ss - g13 * g13).max(0.0).sqrt() * (h / 2.0) / ssf; - simple(b.take(), Rect::new(g12 * w / ssf, h / 2.0 - dy4, g0w, h / 2.0 + dy4), w, h) - } - _ => return None, - }; - Some(g) -} - -fn bracket_and_arrow_shapes(c: &Ctx) -> Option { - let name = c.name; - let w = c.w; - let h = c.h; - let ss = c.w.min(c.h); - let full = Rect::new(0.0, 0.0, c.w, c.h); - let a = |i: usize| c.a(i); - let mut b = Pb::new(); - let g = match c.name { - "cloud" | "cloudCallout" => cloud(name, w, h, a(0), a(1)), - "bracketPair" => { - let r = ss * a(0).clamp(0.0, 50000.0) / 1e5; - let mut l = Pb::new(); - l.m(r, h).arc(r, r, 90.0, 90.0).l(0.0, r).arc(r, r, 180.0, 90.0); - l.m(w - r, 0.0).arc(r, r, 270.0, 90.0).l(w, h - r).arc(r, r, 0.0, 90.0); - let f = corner_rect(w, h, [Corner::Round(r); 4]); - Geometry { - paths: vec![fill_only(f), stroke_only(l.take())], - text_rect: full.inset(-r * 0.29289), - handles: vec![], - sites: mid_sites(w, h), - } - } - "bracePair" => { - let r = ss * a(0).clamp(0.0, 25000.0) / 1e5; - let mut l = Pb::new(); - l.m(2.0 * r, h).arc(r, r, 90.0, 90.0).l(r, h / 2.0 + r).arc(r, r, 0.0, -90.0).arc(r, r, 90.0, -90.0).l(r, r).arc(r, r, 180.0, 90.0); - l.m(w - 2.0 * r, 0.0) - .arc(r, r, 270.0, 90.0) - .l(w - r, h / 2.0 - r) - .arc(r, r, 180.0, -90.0) - .arc(r, r, 270.0, -90.0) - .l(w - r, h - r) - .arc(r, r, 0.0, 90.0); - let f = corner_rect(w, h, [Corner::Round(r); 4]); - Geometry { paths: vec![fill_only(f), stroke_only(l.take())], text_rect: full.inset(-r * 1.2), handles: vec![], sites: mid_sites(w, h) } - } - "leftBracket" | "rightBracket" => { - let r = (ss * a(0).clamp(0.0, 50000.0 * h / ss.max(1e-9)) / 1e5).min(h / 2.0); - let mut l = Pb::new(); - l.m(w, h).arc(w, r, 90.0, 90.0).l(0.0, r).arc(w, r, 180.0, 90.0); - let mut path = l.take(); - if name == "rightBracket" { - path.apply_affine(kurbo::Affine::new([-1.0, 0.0, 0.0, 1.0, w, 0.0])); - } - // Filled (when the shape has a fill) out to the straight side, as PowerPoint does. - let mut area = path.clone(); - area.close_path(); - Geometry { paths: vec![fill_only(area), stroke_only(path)], text_rect: full, handles: vec![], sites: mid_sites(w, h) } - } - "leftBrace" | "rightBrace" => { - let r = (ss * a(0).clamp(0.0, 25000.0 * h / ss.max(1e-9)) / 1e5).min(h / 4.0); - let my = h * a(1).clamp(0.0, 100000.0) / 1e5; - let hw = w / 2.0; - let mut l = Pb::new(); - l.m(w, h).arc(hw, r, 90.0, 90.0).l(hw, my + r).arc(hw, r, 0.0, -90.0).arc(hw, r, 90.0, -90.0).l(hw, r).arc(hw, r, 180.0, 90.0); - let mut path = l.take(); - if name == "rightBrace" { - path.apply_affine(kurbo::Affine::new([-1.0, 0.0, 0.0, 1.0, w, 0.0])); - } - // Filled (when the shape has a fill) out to the straight side, as PowerPoint does. - let mut area = path.clone(); - area.close_path(); - Geometry { paths: vec![fill_only(area), stroke_only(path)], text_rect: full, handles: vec![], sites: mid_sites(w, h) } - } - "rightArrow" => arrow(Dir::Right, w, h, a(0), a(1)), - "leftArrow" => arrow(Dir::Left, w, h, a(0), a(1)), - "upArrow" => arrow(Dir::Up, w, h, a(0), a(1)), - "downArrow" => arrow(Dir::Down, w, h, a(0), a(1)), - "leftRightArrow" => double_arrow(false, w, h, a(0), a(1)), - "upDownArrow" => double_arrow(true, w, h, a(0), a(1)), - "notchedRightArrow" | "stripedRightArrow" => { - let mut g = arrow(Dir::Right, w, h, a(0), a(1)); - let k = a(0).clamp(0.0, 100000.0) / 1e5; - let (y1, y2) = (h / 2.0 - h * k / 2.0, h / 2.0 + h * k / 2.0); - let dx = (ss * a(1).max(0.0) / 1e5).min(w); - if name == "notchedRightArrow" { - // x1 = dy1 · dx2 / hd2 in presetShapeDefinitions, with dy1 = h·k/2: the notch's - // edges run parallel to the head's - let n = dx * k; - let pts = [(0.0, y1), (w - dx, y1), (w - dx, 0.0), (w, h / 2.0), (w - dx, h), (w - dx, y2), (0.0, y2), (n, h / 2.0)]; - g.paths = vec![fill(Pb::new().poly(&pts).take())]; - } else { - let s = ss / 32.0; - let start = 5.0 * s; - let pts = [(start, y1), (w - dx, y1), (w - dx, 0.0), (w, h / 2.0), (w - dx, h), (w - dx, y2), (start, y2)]; - let mut stripes = Pb::new(); - stripes.poly(&[(0.0, y1), (s, y1), (s, y2), (0.0, y2)]); - stripes.poly(&[(2.0 * s, y1), (4.0 * s, y1), (4.0 * s, y2), (2.0 * s, y2)]); - g.paths = vec![fill(stripes.take()), fill(Pb::new().poly(&pts).take())]; - } - g - } - "homePlate" | "chevron" => { - let v = a(0).clamp(0.0, 100000.0 * w / ss.max(1e-9)); - let d = (ss * v / 1e5).min(w); - let pts: Vec<(f64, f64)> = if name == "homePlate" { - vec![(0.0, 0.0), (w - d, 0.0), (w, h / 2.0), (w - d, h), (0.0, h)] - } else { - vec![(0.0, 0.0), (w - d, 0.0), (w, h / 2.0), (w - d, h), (0.0, h), (d, h / 2.0)] - }; - // Text rectangles as presetShapeDefinitions give them: homePlate's runs to halfway - // along the point; chevron's lies between the notch and the point's base (x1..x2) - // and covers the whole width once those meet or cross (`?: dx x1 l`). - let text = if name == "homePlate" { - Rect::new(0.0, 0.0, w - d / 2.0, h) - } else if w - d > d { - Rect::new(d, 0.0, w - d, h) - } else { - Rect::new(0.0, 0.0, w, h) - }; - let mut g = simple(b.poly(&pts).take(), text, w, h); - g.handles.push(Handle::new(0, Point::new(w, 0.0), Vec2::new(-ss / 1e5, 0.0), v, 0.0, 100000.0 * w / ss.max(1e-9))); - g - } - "quadArrow" => { - let (t, hw, hl) = (ss * a(0).clamp(0.0, 50000.0) / 1e5, ss * a(1).clamp(0.0, 50000.0) / 1e5, ss * a(2).clamp(0.0, 50000.0) / 1e5); - let (cx, cy) = (w / 2.0, h / 2.0); - let (t2, hw2) = (t / 2.0, hw); - let pts = [ - (0.0, cy), - (hl, cy - hw2), - (hl, cy - t2), - (cx - t2, cy - t2), - (cx - t2, hl), - (cx - hw2, hl), - (cx, 0.0), - (cx + hw2, hl), - (cx + t2, hl), - (cx + t2, cy - t2), - (w - hl, cy - t2), - (w - hl, cy - hw2), - (w, cy), - (w - hl, cy + hw2), - (w - hl, cy + t2), - (cx + t2, cy + t2), - (cx + t2, h - hl), - (cx + hw2, h - hl), - (cx, h), - (cx - hw2, h - hl), - (cx - t2, h - hl), - (cx - t2, cy + t2), - (hl, cy + t2), - (hl, cy + hw2), - ]; - simple(b.poly(&pts).take(), Rect::new(cx - t2, cy - t2, cx + t2, cy + t2), w, h) - } - "leftRightUpArrow" => { - let (t, hw, hl) = (ss * a(0).clamp(0.0, 50000.0) / 1e5, ss * a(1).clamp(0.0, 50000.0) / 1e5, ss * a(2).clamp(0.0, 50000.0) / 1e5); - let cx = w / 2.0; - let by = h - hw; // horizontal shaft centre - let pts = [ - (0.0, by), - (hl, by - hw), - (hl, by - t / 2.0), - (cx - t / 2.0, by - t / 2.0), - (cx - t / 2.0, hl), - (cx - hw, hl), - (cx, 0.0), - (cx + hw, hl), - (cx + t / 2.0, hl), - (cx + t / 2.0, by - t / 2.0), - (w - hl, by - t / 2.0), - (w - hl, by - hw), - (w, by), - (w - hl, h), - (w - hl, by + t / 2.0), - (hl, by + t / 2.0), - (hl, h), - ]; - simple(b.poly(&pts).take(), Rect::new(hl, by - t / 2.0, w - hl, by + t / 2.0), w, h) - } - "leftUpArrow" | "bentUpArrow" => { - let (t, hw, hl) = (ss * a(0).clamp(0.0, 50000.0) / 1e5, ss * a(1).clamp(0.0, 50000.0) / 1e5, ss * a(2).clamp(0.0, 50000.0) / 1e5); - let pts: Vec<(f64, f64)> = if name == "leftUpArrow" { - let cx = w - hw; - let cy = h - hw; - vec![ - (0.0, cy), - (hl, cy - hw), - (hl, cy - t / 2.0), - (cx - t / 2.0, cy - t / 2.0), - (cx - t / 2.0, hl), - (cx - hw, hl), - (cx, 0.0), - (w, hl), - (cx + t / 2.0, hl), - (cx + t / 2.0, cy + t / 2.0), - (hl, cy + t / 2.0), - (hl, h), - ] - } else { - let cx = w - hw; - vec![ - (0.0, h - t), - (cx - t / 2.0, h - t), - (cx - t / 2.0, hl), - (cx - hw, hl), - (cx, 0.0), - (w, hl), - (cx + t / 2.0, hl), - (cx + t / 2.0, h), - (0.0, h), - ] - }; - simple(b.poly(&pts).take(), full, w, h) - } - "bentArrow" => { - let (t, hw, hl, r) = ( - ss * a(0).clamp(0.0, 50000.0) / 1e5, - ss * a(1).clamp(0.0, 50000.0) / 1e5, - ss * a(2).clamp(0.0, 50000.0) / 1e5, - ss * a(3).clamp(0.0, 100000.0) / 1e5, - ); - let cy = hw; // head centre line - let ro = r.max(t); - let ri = (ro - t).max(0.0); - b.m(0.0, h) - .l(0.0, cy - t / 2.0 + ro) - .arc(ro, ro, 180.0, 90.0) - .l(w - hl, cy - t / 2.0) - .l(w - hl, 0.0) - .l(w, cy) - .l(w - hl, 2.0 * hw) - .l(w - hl, cy + t / 2.0); - b.l(t + ri, cy + t / 2.0); - if ri > 0.0 { - b.arc(ri, ri, 270.0, -90.0); - } - b.l(t, h).z(); - simple(b.take(), full, w, h) - } - "uturnArrow" => { - let (t, hw, hl, r) = ( - ss * a(0).clamp(0.0, 25000.0) / 1e5, - ss * a(1).clamp(0.0, 25000.0) / 1e5, - ss * a(2).clamp(0.0, 25000.0) / 1e5, - ss * a(3).clamp(0.0, 100000.0) / 1e5, - ); - let hy = (h * a(4).clamp(0.0, 100000.0) / 1e5).max(hl + t); - let ax = w - hw; // arrow shaft centre x - let ro = r.max(t).min((ax + t / 2.0) / 2.0); - let ri = (ro - t).max(0.0); - b.m(0.0, h).l(0.0, ro).arc(ro, ro, 180.0, 90.0).l(ax + t / 2.0 - ro, 0.0).arc(ro, ro, 270.0, 90.0); - b.l(ax + t / 2.0, hy - hl).l(w, hy - hl).l(ax, hy).l(ax - hw, hy - hl).l(ax - t / 2.0, hy - hl).l(ax - t / 2.0, ro); - if ri > 0.0 { - b.arc(ri, ri, 0.0, -90.0); - } - b.l(t + ri, t); - if ri > 0.0 { - b.arc(ri, ri, 270.0, -90.0); - } - b.l(t, h).z(); - simple(b.take(), full, w, h) - } - "rightArrowCallout" | "leftArrowCallout" | "upArrowCallout" | "downArrowCallout" => { - let d = match name { - "rightArrowCallout" => Dir::Right, - "leftArrowCallout" => Dir::Left, - "upArrowCallout" => Dir::Up, - _ => Dir::Down, - }; - let (l, t) = len_thick(d, w, h); - let ss2 = l.min(t); - let shaft = ss2 * a(0).clamp(0.0, 100000.0) / 1e5; - let head = ss2 * a(1).clamp(0.0, 100000.0) / 1e5; - let hl = ss2 * a(2).clamp(0.0, 100000.0) / 1e5; - let boxl = (l * a(3).clamp(0.0, 100000.0) / 1e5).min(l - hl); - let c = t / 2.0; - let pts = [ - (0.0, 0.0), - (boxl, 0.0), - (boxl, c - shaft / 2.0), - (l - hl, c - shaft / 2.0), - (l - hl, c - head), - (l, c), - (l - hl, c + head), - (l - hl, c + shaft / 2.0), - (boxl, c + shaft / 2.0), - (boxl, t), - (0.0, t), - ]; - let pts = orient(d, w, h, &pts); - let tr = orient(d, w, h, &[(0.0, 0.0), (boxl, t)]); - simple(b.poly(&pts).take(), Rect::from_points(Point::new(tr[0].0, tr[0].1), Point::new(tr[1].0, tr[1].1)).abs(), w, h) - } - "mathPlus" | "mathMinus" | "mathEqual" | "mathDivide" | "mathMultiply" | "mathNotEqual" => math(name, w, h, a(0), a(1), a(2)), - _ => return None, - }; - Some(g) -} - -fn flowchart_and_star_shapes(c: &Ctx) -> Option { - let name = c.name; - let w = c.w; - let h = c.h; - let ss = c.w.min(c.h); - let full = Rect::new(0.0, 0.0, c.w, c.h); - let a = |i: usize| c.a(i); - let mut b = Pb::new(); - let g = match c.name { - "flowChartPredefinedProcess" => { - let r = Pb::new().poly(&[(0.0, 0.0), (w, 0.0), (w, h), (0.0, h)]).take(); - let mut l = Pb::new(); - l.m(w / 8.0, 0.0).l(w / 8.0, h).m(w * 7.0 / 8.0, 0.0).l(w * 7.0 / 8.0, h); - Geometry { - paths: vec![fill(r), stroke_only(l.take())], - text_rect: Rect::new(w / 8.0, 0.0, w * 7.0 / 8.0, h), - handles: vec![], - sites: mid_sites(w, h), - } - } - "flowChartInternalStorage" => { - let r = Pb::new().poly(&[(0.0, 0.0), (w, 0.0), (w, h), (0.0, h)]).take(); - let mut l = Pb::new(); - l.m(w / 8.0, 0.0).l(w / 8.0, h).m(0.0, h / 8.0).l(w, h / 8.0); - Geometry { - paths: vec![fill(r), stroke_only(l.take())], - text_rect: Rect::new(w / 8.0, h / 8.0, w, h), - handles: vec![], - sites: mid_sites(w, h), - } - } - "flowChartDocument" => { - let u = |x: f64, y: f64| (w * x / 21600.0, h * y / 21600.0); - let (p1, p2, p3, p4) = (u(21600.0, 17322.0), u(10800.0, 17322.0), u(10800.0, 23922.0), u(0.0, 20172.0)); - b.m(0.0, 0.0).l(w, 0.0).l(p1.0, p1.1).c(p2.0, p2.1, p3.0, p3.1, p4.0, p4.1).z(); - simple(b.take(), Rect::new(0.0, 0.0, w, h * 17322.0 / 21600.0), w, h) - } - "flowChartMultidocument" => { - // ECMA-376 multidocument (21600ths): two back pages peeking out above and right of - // the front one; the back pages' edges are outlined only where they show. - let x = |v: f64| w * v / 21600.0; - let y = |v: f64| h * v / 21600.0; - let front = |b: &mut Pb| { - b.m(0.0, y(20782.0)) - .c(x(9298.0), y(23542.0), x(9298.0), y(18022.0), x(18595.0), y(18022.0)) - .l(x(18595.0), y(3675.0)) - .l(0.0, y(3675.0)) - .z(); - }; - let mid = |b: &mut Pb| { - b.m(x(1532.0), y(3675.0)).l(x(1532.0), y(1815.0)).l(x(20000.0), y(1815.0)).l(x(20000.0), y(16252.0)); - b.c(x(19298.0), y(16252.0), x(18595.0), y(16352.0), x(18595.0), y(16352.0)); - }; - let back = |b: &mut Pb| { - b.m(x(2972.0), y(1815.0)).l(x(2972.0), 0.0).l(w, 0.0).l(w, y(14392.0)); - b.c(x(20800.0), y(14392.0), x(20000.0), y(14467.0), x(20000.0), y(14467.0)); - }; - let mut area = Pb::new(); - front(&mut area); - mid(&mut area); - area.l(x(18595.0), y(3675.0)).z(); - back(&mut area); - area.l(x(20000.0), y(1815.0)).z(); - let mut outline = Pb::new(); - outline.m(0.0, y(3675.0)).l(x(18595.0), y(3675.0)).l(x(18595.0), y(18022.0)); - outline.c(x(9298.0), y(18022.0), x(9298.0), y(23542.0), 0.0, y(20782.0)).z(); - mid(&mut outline); - back(&mut outline); - Geometry { - paths: vec![fill_only(area.take()), stroke_only(outline.take())], - text_rect: Rect::new(0.0, y(3675.0), x(18595.0), y(17322.0)), - handles: vec![], - sites: mid_sites(w, h), - } - } - "flowChartTerminator" => { - let rx = (w * 0.16).min(w / 2.0); - b.m(rx, 0.0).l(w - rx, 0.0).arc(rx, h / 2.0, 270.0, 180.0).l(rx, h).arc(rx, h / 2.0, 90.0, 180.0).z(); - simple(b.take(), Rect::new(rx * 0.3, h * 0.15, w - rx * 0.3, h * 0.85), w, h) - } - "flowChartManualInput" => simple(b.poly(&[(0.0, h / 5.0), (w, 0.0), (w, h), (0.0, h)]).take(), Rect::new(0.0, h / 5.0, w, h), w, h), - "flowChartOffpageConnector" => { - simple(b.poly(&[(0.0, 0.0), (w, 0.0), (w, h * 0.8), (w / 2.0, h), (0.0, h * 0.8)]).take(), Rect::new(0.0, 0.0, w, h * 0.8), w, h) - } - "flowChartPunchedCard" => { - simple(b.poly(&[(w * 0.2, 0.0), (w, 0.0), (w, h), (0.0, h), (0.0, h * 0.2)]).take(), Rect::new(0.0, h * 0.2, w, h), w, h) - } - "flowChartPunchedTape" => { - // ECMA-376: each long edge is two half-ellipses a quarter of the width wide and a - // tenth of the height deep, one bulging in and one out. - let (rx, ry) = (w / 4.0, h / 10.0); - b.m(0.0, ry).arc(rx, ry, 180.0, -180.0).arc(rx, ry, 180.0, 180.0).l(w, h - ry).arc(rx, ry, 0.0, -180.0).arc(rx, ry, 0.0, 180.0).z(); - simple(b.take(), Rect::new(0.0, h / 5.0, w, h * 0.8), w, h) - } - "flowChartSummingJunction" | "flowChartOr" => { - let e = Pb::new().ellipse(w / 2.0, h / 2.0, w / 2.0, h / 2.0).take(); - let mut l = Pb::new(); - if name == "flowChartOr" { - l.m(w / 2.0, 0.0).l(w / 2.0, h).m(0.0, h / 2.0).l(w, h / 2.0); - } else { - let (dx, dy) = (w / 2.0 * std::f64::consts::FRAC_1_SQRT_2, h / 2.0 * std::f64::consts::FRAC_1_SQRT_2); - l.m(w / 2.0 - dx, h / 2.0 - dy).l(w / 2.0 + dx, h / 2.0 + dy).m(w / 2.0 + dx, h / 2.0 - dy).l(w / 2.0 - dx, h / 2.0 + dy); - } - Geometry { - paths: vec![fill(e), stroke_only(l.take())], - text_rect: Rect::new(w * 0.14645, h * 0.14645, w * 0.85355, h * 0.85355), - handles: vec![], - sites: ellipse_sites(w, h), - } - } - "flowChartCollate" => simple(b.poly(&[(0.0, 0.0), (w, 0.0), (0.0, h), (w, h)]).take(), Rect::new(w / 4.0, h / 4.0, w * 0.75, h * 0.75), w, h), - "flowChartOnlineStorage" => { - let rx = w / 6.0; - b.m(rx, 0.0).l(w, 0.0).arc(rx, h / 2.0, 270.0, -180.0).l(rx, h).arc(rx, h / 2.0, 90.0, 180.0).z(); - simple(b.take(), Rect::new(rx, 0.0, w - rx, h), w, h) - } - "flowChartDelay" => { - b.m(0.0, 0.0).l(w / 2.0, 0.0).arc(w / 2.0, h / 2.0, 270.0, 180.0).l(0.0, h).z(); - simple(b.take(), Rect::new(0.0, h * 0.15, w * 0.85, h * 0.85), w, h) - } - "flowChartMagneticTape" => { - b.m(w / 2.0, h).arc(w / 2.0, h / 2.0, 90.0, 90.0).arc(w / 2.0, h / 2.0, 180.0, 90.0).arc(w / 2.0, h / 2.0, 270.0, 90.0).arc( - w / 2.0, - h / 2.0, - 0.0, - 45.0, - ); - let p = b.cur; - b.l(w, p.y).l(w, h).z(); - simple(b.take(), Rect::new(w * 0.14645, h * 0.14645, w * 0.85355, h * 0.85355), w, h) - } - "flowChartDisplay" => { - let rx = w / 6.0; - b.m(0.0, h / 2.0).l(rx, 0.0).l(w - rx, 0.0).arc(rx, h / 2.0, 270.0, 180.0).l(rx, h).z(); - simple(b.take(), Rect::new(rx, 0.0, w - rx, h), w, h) - } - "star4" | "star5" | "star6" | "star7" | "star8" | "star10" | "star12" | "star16" | "star24" | "star32" => { - let n: usize = name.trim_start_matches("star").parse().unwrap_or(5); - let v = a(0).clamp(0.0, 50000.0); - let inner = v / 50000.0; - let text = star_text_rect(n, w, h, inner).unwrap_or_else(|| full.inset(-ss * (0.5 - inner * 0.5) * 0.5)); - let mut g = simple(b.poly(&star(n, w, h, inner)).take(), text, w, h); - g.handles.push(Handle::new(0, Point::new(w / 2.0, h / 2.0), Vec2::new(0.0, -h / 2.0 / 50000.0), v, 0.0, 50000.0)); - g - } - "irregularSeal1" => { - // ECMA-376 irregularSeal1 ("Explosion: 8 Points"), in 21600ths of the box. - let pts = spec_pts( - &[ - (10800, 5800), - (14522, 0), - (14155, 5325), - (18380, 4457), - (16702, 7315), - (21097, 8137), - (17607, 10475), - (21600, 13290), - (16837, 12942), - (18145, 18095), - (14020, 14457), - (13247, 19737), - (10532, 14935), - (8485, 21600), - (7715, 15627), - (4762, 17617), - (5667, 13937), - (135, 14587), - (3722, 11775), - (0, 8615), - (4627, 7617), - (370, 2295), - (7312, 6320), - (8352, 2295), - ], - w, - h, - ); - simple(b.poly(&pts).take(), Rect::new(w * 4627.0 / 21600.0, h * 6320.0 / 21600.0, w * 16702.0 / 21600.0, h * 13937.0 / 21600.0), w, h) - } - "irregularSeal2" => { - // ECMA-376 irregularSeal2 ("Explosion: 14 Points"), in 21600ths of the box. - let pts = spec_pts( - &[ - (11462, 4342), - (14790, 0), - (14525, 5777), - (18007, 3172), - (16380, 6532), - (21600, 6645), - (16985, 9402), - (18270, 11290), - (16380, 12310), - (18877, 15632), - (14640, 14350), - (14942, 17370), - (12180, 15935), - (11612, 18842), - (9872, 17370), - (8700, 19712), - (7527, 18125), - (4917, 21600), - (4805, 18240), - (1285, 17825), - (3330, 15370), - (0, 12877), - (3935, 11592), - (1172, 8270), - (5372, 7817), - (4502, 3625), - (8550, 6382), - (9722, 1887), - ], - w, - h, - ); - simple(b.poly(&pts).take(), Rect::new(w * 5372.0 / 21600.0, h * 6382.0 / 21600.0, w * 14640.0 / 21600.0, h * 15935.0 / 21600.0), w, h) - } - _ => return None, - }; - Some(g) -} - -fn callout_wave_and_connector_shapes(c: &Ctx) -> Option { - let name = c.name; - let w = c.w; - let h = c.h; - let ss = c.w.min(c.h); - let full = Rect::new(0.0, 0.0, c.w, c.h); - let a = |i: usize| c.a(i); - let mut b = Pb::new(); - let g = match c.name { - "ribbon" | "ribbon2" => ribbon(name == "ribbon2", w, h, a(0), a(1)), - "verticalScroll" | "horizontalScroll" => scroll(name == "verticalScroll", w, h, a(0)), - "wave" | "doubleWave" => { - // ECMA-376 wave / doubleWave: the top and bottom edges are cubic waves (one or two - // periods) of amplitude adj1, shifted sideways by adj2. - let a1 = a(0).clamp(0.0, if name == "wave" { 20000.0 } else { 12500.0 }); - let a2 = a(1).clamp(-10000.0, 10000.0); - let y1 = h * a1 / 100000.0; - let dy2 = y1 * 10.0 / 3.0; - let (y2, y3, y4) = (y1 - dy2, y1 + dy2, h - y1); - let (y5, y6) = (y4 - dy2, y4 + dy2); - let of2 = w * a2 / 50000.0; - let dx2 = of2.min(0.0); - let dxr = of2.max(0.0); - let (x2, xr, xl, x10) = (-dx2, w - dxr, dxr, w + dx2); - let text_y = h * a1 / 50000.0; - if name == "wave" { - let dx3 = (dx2 + xr) / 3.0; - let (x3, x7) = (x2 + dx3, xl + dx3); - let (x4, x8) = ((x3 + xr) / 2.0, (x7 + x10) / 2.0); - b.m(x2, y1).c(x3, y2, x4, y3, xr, y1).l(x10, y4).c(x8, y6, x7, y5, xl, y4).z(); - } else { - let (dx3, dx4) = ((dx2 + xr) / 6.0, (dx2 + xr) / 3.0); - let (x3, x4, x5) = (x2 + dx3, x2 + dx4, (x2 + xr) / 2.0); - let x6 = x5 + dx3; - let x7 = (x6 + xr) / 2.0; - let (x10b, x11, x12) = (xl + dx3, xl + dx4, (xl + x10) / 2.0); - let x13 = x12 + dx3; - let x14 = (x13 + x10) / 2.0; - b.m(x2, y1).c(x3, y2, x4, y3, x5, y1).c(x6, y2, x7, y3, xr, y1).l(x10, y4); - b.c(x14, y6, x13, y5, x12, y4).c(x11, y6, x10b, y5, xl, y4).z(); - } - simple(b.take(), Rect::new(x2.max(xl), text_y, xr.min(x10), h - text_y), w, h) - } - "wedgeRectCallout" | "wedgeRoundRectCallout" => { - let r = if name == "wedgeRoundRectCallout" { ss * a(2).clamp(0.0, 50000.0) / 1e5 } else { 0.0 }; - wedge_rect(w, h, a(0), a(1), r) - } - "wedgeEllipseCallout" => { - let tip = Point::new(w / 2.0 + w * a(0) / 1e5, h / 2.0 + h * a(1) / 1e5); - let ang = (tip.y - h / 2.0).atan2(tip.x - w / 2.0).to_degrees(); - let s = vis(ang + 10.0, w / 2.0, h / 2.0); - let p0 = Point::new(w / 2.0 + w / 2.0 * s.to_radians().cos(), h / 2.0 + h / 2.0 * s.to_radians().sin()); - let e = vis(ang - 10.0, w / 2.0, h / 2.0); - let mut sw = e - s; - if sw <= 0.0 { - sw += 360.0; - } - b.m(p0.x, p0.y).arc(w / 2.0, h / 2.0, s, sw).l(tip.x, tip.y).z(); - let mut g = simple(b.take(), Rect::new(w * 0.14645, h * 0.14645, w * 0.85355, h * 0.85355), w, h); - g.handles.push(Handle::new(0, Point::new(w / 2.0, h / 2.0), Vec2::new(w / 1e5, 0.0), a(0), -1e6, 1e6)); - g.handles.push(Handle::new(1, Point::new(w / 2.0, h / 2.0), Vec2::new(0.0, h / 1e5), a(1), -1e6, 1e6)); - g.handles.retain(|_| false); - g.handles.push(tip_handle(w, h, tip)); - g - } - "borderCallout1" => { - let r = Pb::new().poly(&[(0.0, 0.0), (w, 0.0), (w, h), (0.0, h)]).take(); - let p1 = (w * a(1) / 1e5, h * a(0) / 1e5); - let p2 = (w * a(3) / 1e5, h * a(2) / 1e5); - let l = Pb::new().m(p1.0, p1.1).l(p2.0, p2.1).take(); - Geometry { paths: vec![fill(r), stroke_only(l)], text_rect: full, handles: vec![], sites: mid_sites(w, h) } - } - "line" | "straightConnector1" => { - let l = Pb::new().m(0.0, 0.0).l(w, h).take(); - Geometry { paths: vec![stroke_only(l)], text_rect: full, handles: vec![], sites: vec![Point::ZERO, Point::new(w, h)] } - } - "bentConnector2" => { - let l = Pb::new().m(0.0, 0.0).l(w, 0.0).l(w, h).take(); - Geometry { paths: vec![stroke_only(l)], text_rect: full, handles: vec![], sites: vec![Point::ZERO, Point::new(w, h)] } - } - "bentConnector3" | "bentConnector4" | "bentConnector5" => { - let x = w * a(0) / 1e5; - let l = Pb::new().m(0.0, 0.0).l(x, 0.0).l(x, h).l(w, h).take(); - let mut g = Geometry { paths: vec![stroke_only(l)], text_rect: full, handles: vec![], sites: vec![Point::ZERO, Point::new(w, h)] }; - g.handles.push(Handle::new(0, Point::new(0.0, h / 2.0), Vec2::new(w / 1e5, 0.0), a(0), -1e6, 1e6)); - g - } - "curvedConnector2" | "curvedConnector3" | "curvedConnector4" | "curvedConnector5" => { - let x = w * if name == "curvedConnector2" { 100000.0 } else { a(0) } / 1e5; - let l = Pb::new().m(0.0, 0.0).c(x / 2.0, 0.0, x, h / 4.0, x, h / 2.0).c(x, h * 0.75, (x + w) / 2.0, h, w, h).take(); - Geometry { paths: vec![stroke_only(l)], text_rect: full, handles: vec![], sites: vec![Point::ZERO, Point::new(w, h)] } - } - _ => return None, - }; - Some(g) -} diff --git a/crates/geom/src/preset/builder.rs b/crates/geom/src/preset/builder.rs deleted file mode 100644 index 701d15242..000000000 --- a/crates/geom/src/preset/builder.rs +++ /dev/null @@ -1,344 +0,0 @@ -use super::catalog::{FillMode, Geometry, Handle, SubPath}; -use super::{Arc, BezPath, Point, Rect, Vec2}; - -// ---------- path builder ---------- - -pub(super) struct Pb { - pub(super) p: BezPath, - pub(super) cur: Point, -} - -impl Pb { - pub(super) fn new() -> Self { - Pb { p: BezPath::new(), cur: Point::ZERO } - } - pub(super) fn m(&mut self, x: f64, y: f64) -> &mut Self { - self.cur = Point::new(x, y); - self.p.move_to(self.cur); - self - } - pub(super) fn l(&mut self, x: f64, y: f64) -> &mut Self { - self.cur = Point::new(x, y); - self.p.line_to(self.cur); - self - } - pub(super) fn c(&mut self, x1: f64, y1: f64, x2: f64, y2: f64, x: f64, y: f64) -> &mut Self { - self.cur = Point::new(x, y); - self.p.curve_to(Point::new(x1, y1), Point::new(x2, y2), self.cur); - self - } - pub(super) fn q(&mut self, x1: f64, y1: f64, x: f64, y: f64) -> &mut Self { - self.cur = Point::new(x, y); - self.p.quad_to(Point::new(x1, y1), self.cur); - self - } - /// Elliptic arc continuing from the current point, which lies on the ellipse at parametric - /// angle `st` (degrees); sweeps `sw` degrees (positive = clockwise on screen). - pub(super) fn arc(&mut self, wr: f64, hr: f64, st: f64, sw: f64) -> &mut Self { - let (s, e) = (st.to_radians(), (st + sw).to_radians()); - let c = Point::new(self.cur.x - wr * s.cos(), self.cur.y - hr * s.sin()); - let a = Arc::new(c, Vec2::new(wr.abs(), hr.abs()), s, e - s, 0.0); - a.to_cubic_beziers(0.05, |p1, p2, p| { - self.p.curve_to(p1, p2, p); - }); - self.cur = Point::new(c.x + wr * e.cos(), c.y + hr * e.sin()); - self - } - /// A DrawingML `arcTo`: angles are where the ray from the ellipse's centre at that angle - /// meets it (not the ellipse's parameter), so elliptical arcs start and end where the - /// standard's shapes expect. - pub(super) fn arc_spec(&mut self, wr: f64, hr: f64, st: f64, sw: f64) -> &mut Self { - let par = |a: f64| { - let a = a.to_radians(); - (wr * a.sin()).atan2(hr * a.cos()) - }; - let t0 = par(st); - let mut d = par(st + sw) - t0; - let tau = std::f64::consts::TAU; - if sw.abs() >= 360.0 { - d = tau.copysign(sw); - } else { - while sw > 0.0 && d < 0.0 { - d += tau; - } - while sw < 0.0 && d > 0.0 { - d -= tau; - } - } - self.arc(wr, hr, t0.to_degrees(), d.to_degrees()) - } - pub(super) fn z(&mut self) -> &mut Self { - self.p.close_path(); - self - } - pub(super) fn poly(&mut self, pts: &[(f64, f64)]) -> &mut Self { - for (i, (x, y)) in pts.iter().enumerate() { - if i == 0 { - self.m(*x, *y); - } else { - self.l(*x, *y); - } - } - self.z() - } - pub(super) fn ellipse(&mut self, cx: f64, cy: f64, rx: f64, ry: f64) -> &mut Self { - self.m(cx + rx, cy); - self.arc(rx, ry, 0.0, 360.0); - self.z() - } - pub(super) fn take(&mut self) -> BezPath { - std::mem::take(&mut self.p) - } -} - -pub(super) fn fill(p: BezPath) -> SubPath { - SubPath { path: p, fill: FillMode::Norm, stroke: true, even_odd: false } -} - -pub(super) fn fill_eo(p: BezPath) -> SubPath { - SubPath { path: p, fill: FillMode::Norm, stroke: true, even_odd: true } -} - -pub(super) fn shade(p: BezPath, m: FillMode) -> SubPath { - SubPath { path: p, fill: m, stroke: true, even_odd: false } -} - -pub(super) fn stroke_only(p: BezPath) -> SubPath { - SubPath { path: p, fill: FillMode::None, stroke: true, even_odd: false } -} - -pub(super) fn fill_only(p: BezPath) -> SubPath { - SubPath { path: p, fill: FillMode::Norm, stroke: false, even_odd: false } -} - -/// Parametric angle on an rx×ry ellipse for a visual angle `deg` (file angles are visual). -pub(super) fn vis(deg: f64, rx: f64, ry: f64) -> f64 { - let t = deg.to_radians(); - (rx * t.sin()).atan2(ry * t.cos()).to_degrees() -} - -pub(super) fn polygon_regular(n: usize, w: f64, h: f64, phase: f64) -> Vec<(f64, f64)> { - let pts: Vec<(f64, f64)> = (0..n) - .map(|i| { - let a = (phase + 360.0 * i as f64 / n as f64).to_radians(); - (a.cos(), a.sin()) - }) - .collect(); - normalize(&pts, w, h) -} - -/// Scale `pts` so their bounding box fills 0..w × 0..h. -fn normalize(pts: &[(f64, f64)], w: f64, h: f64) -> Vec<(f64, f64)> { - let (mut x0, mut y0, mut x1, mut y1) = (f64::MAX, f64::MAX, f64::MIN, f64::MIN); - for (x, y) in pts { - x0 = x0.min(*x); - y0 = y0.min(*y); - x1 = x1.max(*x); - y1 = y1.max(*y); - } - let sx = if x1 - x0 > 1e-12 { w / (x1 - x0) } else { 0.0 }; - let sy = if y1 - y0 > 1e-12 { h / (y1 - y0) } else { 0.0 }; - pts.iter().map(|(x, y)| ((x - x0) * sx, (y - y0) * sy)).collect() -} - -/// An n-pointed star as ECMA-376 draws it: points on an ellipse around (hc, vc · vf) with radii -/// half the box stretched by the preset's `hf` / `vf` (so a five-pointed star fills its box and -/// looks regular in a square), the inner corners `inner` of the way out. -pub(super) fn star(n: usize, w: f64, h: f64, inner: f64) -> Vec<(f64, f64)> { - let (hf, vf) = match n { - 5 => (1.05146, 1.10557), - 6 => (1.15470, 1.0), - 7 => (1.02572, 1.05210), - 10 => (1.05146, 1.0), - _ => (1.0, 1.0), - }; - let (rx, ry, cy) = (w / 2.0 * hf, h / 2.0 * vf, h / 2.0 * vf); - let mut pts = Vec::with_capacity(n * 2); - for i in 0..n * 2 { - let a = (-90.0 + 180.0 * i as f64 / n as f64).to_radians(); - let r = if i % 2 == 0 { 1.0 } else { inner }; - pts.push((w / 2.0 + r * rx * a.cos(), cy + r * ry * a.sin())); - } - pts -} - -/// The text rectangle ECMA-376's presetShapeDefinitions give a star (`inner` is the adjust value -/// over 50000), where known: star4's is the square inside its inner points, star5's spans the -/// inner pentagon from its upper side points to its bottom inner point. -pub(super) fn star_text_rect(n: usize, w: f64, h: f64, inner: f64) -> Option { - let (hc, vc) = (w / 2.0, h / 2.0); - match n { - 4 => { - let (dx, dy) = (hc * inner * 45f64.to_radians().cos(), vc * inner * 45f64.to_radians().sin()); - Some(Rect::new(hc - dx, vc - dy, hc + dx, vc + dy)) - } - 5 => { - let (swd2, shd2, svc) = (hc * 1.05146, vc * 1.10557, vc * 1.10557); - let (iwd2, ihd2) = (swd2 * inner, shd2 * inner); - let sdx1 = iwd2 * 18f64.to_radians().cos(); - let sdy1 = ihd2 * 54f64.to_radians().sin(); - Some(Rect::new(hc - sdx1, svc - sdy1, hc + sdx1, svc + ihd2)) - } - _ => None, - } -} - -#[derive(Clone, Copy)] -pub(super) enum Corner { - Square, - Round(f64), - Snip(f64), -} - -/// A rectangle with each corner (TL, TR, BR, BL) square, rounded or snipped. -pub(super) fn corner_rect(w: f64, h: f64, c: [Corner; 4]) -> BezPath { - let mut b = Pb::new(); - let size = |k: Corner| match k { - Corner::Square => 0.0, - Corner::Round(r) | Corner::Snip(r) => r.max(0.0), - }; - let s0 = size(c[0]); - b.m(s0, 0.0); - // top edge → TR - let s1 = size(c[1]); - b.l(w - s1, 0.0); - match c[1] { - Corner::Round(r) if r > 0.0 => { - b.arc(r, r, 270.0, 90.0); - } - Corner::Snip(_) => { - b.l(w, s1); - } - _ => {} - } - let s2 = size(c[2]); - b.l(w, h - s2); - match c[2] { - Corner::Round(r) if r > 0.0 => { - b.arc(r, r, 0.0, 90.0); - } - Corner::Snip(_) => { - b.l(w - s2, h); - } - _ => {} - } - let s3 = size(c[3]); - b.l(s3, h); - match c[3] { - Corner::Round(r) if r > 0.0 => { - b.arc(r, r, 90.0, 90.0); - } - Corner::Snip(_) => { - b.l(0.0, h - s3); - } - _ => {} - } - b.l(0.0, s0); - match c[0] { - Corner::Round(r) if r > 0.0 => { - b.arc(r, r, 180.0, 90.0); - } - Corner::Snip(_) => { - b.l(s0, 0.0); - } - _ => {} - } - b.z(); - b.take() -} - -pub(super) fn mid_sites(w: f64, h: f64) -> Vec { - vec![Point::new(w / 2.0, 0.0), Point::new(0.0, h / 2.0), Point::new(w / 2.0, h), Point::new(w, h / 2.0)] -} - -/// Orientation for single-axis arrows built along +x. -#[derive(Clone, Copy)] -pub(super) enum Dir { - Right, - Left, - Up, - Down, -} - -/// Map canonical (u along the arrow's length L, v across thickness T) to shape space. -pub(super) fn orient(d: Dir, w: f64, h: f64, pts: &[(f64, f64)]) -> Vec<(f64, f64)> { - pts.iter() - .map(|&(u, v)| match d { - Dir::Right => (u, v), - Dir::Left => (w - u, v), - Dir::Up => (v, h - u), - Dir::Down => (v, u), - }) - .collect() -} - -pub(super) fn len_thick(d: Dir, w: f64, h: f64) -> (f64, f64) { - match d { - Dir::Right | Dir::Left => (w, h), - Dir::Up | Dir::Down => (h, w), - } -} - -pub(super) fn arrow(d: Dir, w: f64, h: f64, a1: f64, a2: f64) -> Geometry { - let (l, t) = len_thick(d, w, h); - let ss = l.min(t); - let a1 = a1.clamp(0.0, 100000.0) / 100000.0; - let dx = (ss * a2.clamp(0.0, 100000.0 * l / ss.max(1e-9)) / 100000.0).min(l); - let y1 = t / 2.0 - t * a1 / 2.0; - let y2 = t / 2.0 + t * a1 / 2.0; - let pts = [(0.0, y1), (l - dx, y1), (l - dx, 0.0), (l, t / 2.0), (l - dx, t), (l - dx, y2), (0.0, y2)]; - let pts = orient(d, w, h, &pts); - let tr = orient(d, w, h, &[(0.0, y1), (l - dx + dx * (y1 / (t / 2.0).max(1e-9)), y2)]); - let mut text = Rect::from_points(tr[0], tr[1]); - text = text.abs(); - let mut g = Geometry { paths: vec![fill(Pb::new().poly(&pts).take())], text_rect: text, handles: vec![], sites: mid_sites(w, h) }; - // handle 0: shaft thickness on the head base; handle 1: head length. - let o = orient(d, w, h, &[(l - dx, t / 2.0), (l, t / 2.0)]); - let (o0, o1) = (Point::new(o[0].0, o[0].1), Point::new(o[1].0, o[1].1)); - let across = match d { - Dir::Right | Dir::Left => Vec2::new(0.0, -t / 2.0 / 100000.0), - Dir::Up | Dir::Down => Vec2::new(-t / 2.0 / 100000.0, 0.0), - }; - let along = (o0 - o1) * (ss / 100000.0 / dx.max(1e-9)); - g.handles.push(Handle::new(0, o0, across, a1 * 100000.0, 0.0, 100000.0)); - if dx > 1e-9 { - g.handles.push(Handle::new(1, o1, along, a2, 0.0, 100000.0 * l / ss.max(1e-9))); - } - g -} - -pub(super) fn double_arrow(vertical: bool, w: f64, h: f64, a1: f64, a2: f64) -> Geometry { - let (l, t) = if vertical { (h, w) } else { (w, h) }; - let ss = l.min(t); - let a1 = a1.clamp(0.0, 100000.0) / 100000.0; - let dx = (ss * a2.max(0.0) / 100000.0).min(l / 2.0); - let y1 = t / 2.0 - t * a1 / 2.0; - let y2 = t / 2.0 + t * a1 / 2.0; - let pts = [(0.0, t / 2.0), (dx, 0.0), (dx, y1), (l - dx, y1), (l - dx, 0.0), (l, t / 2.0), (l - dx, t), (l - dx, y2), (dx, y2), (dx, t)]; - let pts = orient(if vertical { Dir::Down } else { Dir::Right }, w, h, &pts); - let r = if vertical { Rect::new(y1, dx, y2, h - dx) } else { Rect::new(dx, y1, w - dx, y2) }; - Geometry { paths: vec![fill(Pb::new().poly(&pts).take())], text_rect: r, handles: vec![], sites: mid_sites(w, h) } -} - -/// Points given in 21600ths of the box (as ECMA-376 defines many fixed shapes), scaled to it. -pub(super) fn spec_pts(pts: &[(i32, i32)], w: f64, h: f64) -> Vec<(f64, f64)> { - pts.iter().map(|(x, y)| (w * *x as f64 / 21600.0, h * *y as f64 / 21600.0)).collect() -} - -pub(super) fn simple(path: BezPath, text: Rect, w: f64, h: f64) -> Geometry { - Geometry { paths: vec![fill(path)], text_rect: text, handles: vec![], sites: mid_sites(w, h) } -} - -pub(super) fn ellipse_sites(w: f64, h: f64) -> Vec { - (0..8) - .map(|i| { - let a = (-90.0 - 45.0 * i as f64).to_radians(); - Point::new(w / 2.0 + w / 2.0 * a.cos(), h / 2.0 + h / 2.0 * a.sin()) - }) - .collect() -} - -pub(super) fn tip_handle(w: f64, h: f64, tip: Point) -> Handle { - // A free 2-D handle is represented as index 0 with zero direction; callers move both values. - Handle { index: 0, pos: tip, origin: Point::new(w / 2.0, h / 2.0), dir: Vec2::new(w / 1e5, h / 1e5), min: -1e6, max: 1e6, angle: false } -} diff --git a/crates/geom/src/preset/catalog.rs b/crates/geom/src/preset/catalog.rs deleted file mode 100644 index ca090f94d..000000000 --- a/crates/geom/src/preset/catalog.rs +++ /dev/null @@ -1,391 +0,0 @@ -use super::builder::vis; -use super::{BezPath, Deserialize, Point, Rect, Serialize, Vec2}; - -/// How a sub-path is filled. `Lighten`/`Darken` variants shade the shape's fill (3-D looking faces). -#[derive(Clone, Copy, Debug, PartialEq, Eq, Serialize, Deserialize)] -#[serde(rename_all = "camelCase")] -pub enum FillMode { - Norm, - None, - Lighten, - LightenLess, - Darken, - DarkenLess, -} - -#[derive(Clone, Debug)] -pub struct SubPath { - pub path: BezPath, - pub fill: FillMode, - pub stroke: bool, - /// Even-odd fill (holes in donuts and frames). - pub even_odd: bool, -} - -/// A draggable adjust handle (the yellow dot). `pos = origin + dir * value`; dragging projects -/// the pointer onto `dir`. An `angle` handle instead measures the pointer's angle about `origin` -/// (1/60 000 degree, y down, 0° at +x). -#[derive(Clone, Debug, PartialEq)] -pub struct Handle { - pub index: usize, - pub pos: Point, - pub origin: Point, - pub dir: Vec2, - pub min: f64, - pub max: f64, - pub angle: bool, -} - -impl Handle { - pub(super) fn new(index: usize, origin: Point, dir: Vec2, value: f64, min: f64, max: f64) -> Self { - Handle { index, pos: origin + dir * value, origin, dir, min, max, angle: false } - } - /// An angle handle on the `rx`×`ry` ellipse around `center` at visual angle `value`. - pub(super) fn angle(index: usize, center: Point, rx: f64, ry: f64, value: f64) -> Self { - let t = vis(value / 60000.0, rx, ry).to_radians(); - let pos = Point::new(center.x + rx * t.cos(), center.y + ry * t.sin()); - Handle { index, pos, origin: center, dir: Vec2::ZERO, min: 0.0, max: 21600000.0, angle: true } - } - /// The adjust value for a pointer at `p` (shape-local space). - pub fn value_at(&self, p: Point) -> f64 { - if self.angle { - let d = p - self.origin; - if !(d.x.is_finite() && d.y.is_finite()) || d.hypot() < 1e-9 { - return self.min; - } - let v = (d.y.atan2(d.x).to_degrees().rem_euclid(360.0) * 60000.0).round(); - return if v >= self.max { self.min } else { v }; - } - let l2 = self.dir.hypot2(); - if l2 < 1e-18 { - return self.min; - } - let v = (p - self.origin).dot(self.dir) / l2; - if !v.is_finite() { - return self.min; - } - v.clamp(self.min.min(self.max), self.max.max(self.min)).round() - } -} - -#[derive(Clone, Debug)] -pub struct Geometry { - pub paths: Vec, - /// Where text goes, in shape-local space. - pub text_rect: Rect, - pub handles: Vec, - /// Connector glue points, shape-local. - pub sites: Vec, -} - -impl Geometry { - /// The union outline used for hit testing and selection (all filled or stroked sub-paths). - pub fn outline(&self) -> BezPath { - let mut p = BezPath::new(); - for s in &self.paths { - p.extend(s.path.iter()); - } - p - } - /// Whether nothing is filled (lines, connectors, arcs, brackets). - pub fn is_open(&self) -> bool { - self.paths.iter().all(|s| s.fill == FillMode::None) - } -} - -/// Gallery category, as in the Shapes menu. -#[derive(Clone, Copy, Debug, PartialEq, Eq, Serialize, Deserialize)] -#[serde(rename_all = "camelCase")] -pub enum Category { - Lines, - Rectangles, - BasicShapes, - BlockArrows, - EquationShapes, - Flowchart, - StarsAndBanners, - Callouts, - ActionButtons, -} - -impl Category { - pub const ALL: [Category; 9] = [ - Category::Lines, - Category::Rectangles, - Category::BasicShapes, - Category::BlockArrows, - Category::EquationShapes, - Category::Flowchart, - Category::StarsAndBanners, - Category::Callouts, - Category::ActionButtons, - ]; - pub fn label(self) -> &'static str { - match self { - Category::Lines => "Lines", - Category::Rectangles => "Rectangles", - Category::BasicShapes => "Basic Shapes", - Category::BlockArrows => "Block Arrows", - Category::EquationShapes => "Equation Shapes", - Category::Flowchart => "Flowchart", - Category::StarsAndBanners => "Stars and Banners", - Category::Callouts => "Callouts", - Category::ActionButtons => "Action Buttons", - } - } -} - -pub struct PresetInfo { - pub name: &'static str, - pub label: &'static str, - pub category: Category, - /// Default adjust values. - pub defaults: &'static [f64], -} - -macro_rules! p { - ($n:literal, $l:literal, $c:ident, [$($d:expr),*]) => { - PresetInfo { name: $n, label: $l, category: Category::$c, defaults: &[$($d as f64),*] } - }; -} - -/// Every preset we generate, in gallery order. -pub static CATALOG: &[PresetInfo] = &[ - p!("line", "Line", Lines, []), - p!("straightConnector1", "Arrow", Lines, []), - p!("bentConnector3", "Connector: Elbow", Lines, [50000]), - p!("curvedConnector3", "Connector: Curved", Lines, [50000]), - p!("bentConnector2", "Connector: Elbow (one bend)", Lines, []), - p!("lineInv", "Line: Rising", Lines, []), - p!("rect", "Rectangle", Rectangles, []), - p!("roundRect", "Rectangle: Rounded Corners", Rectangles, [16667]), - p!("snip1Rect", "Rectangle: Single Corner Snipped", Rectangles, [16667]), - p!("snip2SameRect", "Rectangle: Top Corners Snipped", Rectangles, [16667, 0]), - p!("snip2DiagRect", "Rectangle: Diagonal Corners Snipped", Rectangles, [0, 16667]), - p!("snipRoundRect", "Rectangle: Top Corners One Rounded and One Snipped", Rectangles, [16667, 16667]), - p!("round1Rect", "Rectangle: Single Corner Rounded", Rectangles, [16667]), - p!("round2SameRect", "Rectangle: Top Corners Rounded", Rectangles, [16667, 0]), - p!("round2DiagRect", "Rectangle: Diagonal Corners Rounded", Rectangles, [16667, 0]), - p!("textBox", "Text Box", BasicShapes, []), - p!("ellipse", "Oval", BasicShapes, []), - p!("triangle", "Isosceles Triangle", BasicShapes, [50000]), - p!("rtTriangle", "Right Triangle", BasicShapes, []), - p!("parallelogram", "Parallelogram", BasicShapes, [25000]), - p!("trapezoid", "Trapezoid", BasicShapes, [25000]), - p!("nonIsoscelesTrapezoid", "Trapezoid: Uneven Sides", BasicShapes, [25000, 25000]), - p!("diamond", "Diamond", BasicShapes, []), - p!("pentagon", "Regular Pentagon", BasicShapes, []), - p!("hexagon", "Hexagon", BasicShapes, [25000]), - p!("heptagon", "Heptagon", BasicShapes, []), - p!("octagon", "Octagon", BasicShapes, [29289]), - p!("decagon", "Decagon", BasicShapes, []), - p!("dodecagon", "Dodecagon", BasicShapes, []), - p!("pie", "Partial Circle", BasicShapes, [0, 16200000]), - p!("pieWedge", "Quarter Wedge", BasicShapes, []), - p!("chord", "Chord", BasicShapes, [2700000, 16200000]), - p!("teardrop", "Teardrop", BasicShapes, [100000]), - p!("frame", "Frame", BasicShapes, [12500]), - p!("cornerTabs", "Corner Tabs: Triangles", BasicShapes, []), - p!("squareTabs", "Corner Tabs: Squares", BasicShapes, []), - p!("plaqueTabs", "Corner Tabs: Quarter Circles", BasicShapes, []), - p!("halfFrame", "Half Frame", BasicShapes, [33333, 33333]), - p!("corner", "L-Shape", BasicShapes, [50000, 50000]), - p!("diagStripe", "Diagonal Stripe", BasicShapes, [50000]), - p!("plus", "Cross", BasicShapes, [25000]), - p!("plaque", "Plaque", BasicShapes, [16667]), - p!("can", "Cylinder", BasicShapes, [25000]), - p!("cube", "Cube", BasicShapes, [25000]), - p!("bevel", "Bevel", BasicShapes, [12500]), - p!("donut", "Donut", BasicShapes, [25000]), - p!("noSmoking", "\"Not Allowed\" Symbol", BasicShapes, [18750]), - p!("blockArc", "Block Arc", BasicShapes, [10800000, 0, 25000]), - p!("foldedCorner", "Folded Corner", BasicShapes, [16667]), - p!("smileyFace", "Smiley Face", BasicShapes, [4653]), - p!("heart", "Heart", BasicShapes, []), - p!("lightningBolt", "Lightning Bolt", BasicShapes, []), - p!("sun", "Sun", BasicShapes, [25000]), - p!("moon", "Moon", BasicShapes, [50000]), - p!("cloud", "Cloud", BasicShapes, []), - p!("gear6", "Gear: 6 Teeth", BasicShapes, [15000, 3526]), - p!("gear9", "Gear: 9 Teeth", BasicShapes, [10000, 1763]), - p!("funnel", "Funnel", BasicShapes, []), - p!("arc", "Arc", BasicShapes, [16200000, 0]), - p!("bracketPair", "Double Bracket", BasicShapes, [16667]), - p!("bracePair", "Double Brace", BasicShapes, [8333]), - p!("leftBracket", "Left Bracket", BasicShapes, [8333]), - p!("rightBracket", "Right Bracket", BasicShapes, [8333]), - p!("leftBrace", "Left Brace", BasicShapes, [8333, 50000]), - p!("rightBrace", "Right Brace", BasicShapes, [8333, 50000]), - p!("chartX", "Chart Marker: Cross Lines", BasicShapes, []), - p!("chartStar", "Chart Marker: Star Lines", BasicShapes, []), - p!("chartPlus", "Chart Marker: Plus Lines", BasicShapes, []), - p!("rightArrow", "Arrow: Right", BlockArrows, [50000, 50000]), - p!("leftArrow", "Arrow: Left", BlockArrows, [50000, 50000]), - p!("upArrow", "Arrow: Up", BlockArrows, [50000, 50000]), - p!("downArrow", "Arrow: Down", BlockArrows, [50000, 50000]), - p!("leftRightArrow", "Arrow: Left-Right", BlockArrows, [50000, 50000]), - p!("upDownArrow", "Arrow: Up-Down", BlockArrows, [50000, 50000]), - p!("quadArrow", "Arrow: Quad", BlockArrows, [22500, 22500, 22500]), - p!("leftRightUpArrow", "Arrow: Left-Right-Up", BlockArrows, [25000, 25000, 25000]), - p!("bentArrow", "Arrow: Bent", BlockArrows, [25000, 25000, 25000, 43750]), - p!("uturnArrow", "Arrow: U-Turn", BlockArrows, [25000, 25000, 25000, 43750, 75000]), - p!("curvedRightArrow", "Arrow: Curved Right", BlockArrows, [25000, 50000, 25000]), - p!("curvedLeftArrow", "Arrow: Curved Left", BlockArrows, [25000, 50000, 25000]), - p!("curvedUpArrow", "Arrow: Curved Up", BlockArrows, [25000, 50000, 25000]), - p!("curvedDownArrow", "Arrow: Curved Down", BlockArrows, [25000, 50000, 25000]), - p!("leftUpArrow", "Arrow: Left-Up", BlockArrows, [25000, 25000, 25000]), - p!("bentUpArrow", "Arrow: Bent-Up", BlockArrows, [25000, 25000, 25000]), - p!("stripedRightArrow", "Arrow: Striped Right", BlockArrows, [50000, 50000]), - p!("notchedRightArrow", "Arrow: Notched Right", BlockArrows, [50000, 50000]), - p!("homePlate", "Arrow: Pentagon", BlockArrows, [50000]), - p!("chevron", "Arrow: Chevron", BlockArrows, [50000]), - p!("circularArrow", "Arrow: Circular", BlockArrows, [12500, 1142319, 20457681, 10800000, 12500]), - p!("leftCircularArrow", "Arrow: Circular Counter-clockwise", BlockArrows, [12500, -1142319, 1142319, 10800000, 12500]), - p!("leftRightCircularArrow", "Arrow: Circular Two-headed", BlockArrows, [12500, 1142319, 20457681, 11942319, 12500]), - p!("swooshArrow", "Arrow: Swoosh", BlockArrows, [25000, 16667]), - p!("rightArrowCallout", "Callout: Right Arrow", BlockArrows, [25000, 25000, 25000, 64977]), - p!("downArrowCallout", "Callout: Down Arrow", BlockArrows, [25000, 25000, 25000, 64977]), - p!("leftArrowCallout", "Callout: Left Arrow", BlockArrows, [25000, 25000, 25000, 64977]), - p!("upArrowCallout", "Callout: Up Arrow", BlockArrows, [25000, 25000, 25000, 64977]), - p!("leftRightArrowCallout", "Callout: Left-Right Arrow", BlockArrows, [25000, 25000, 25000, 48123]), - p!("upDownArrowCallout", "Callout: Up-Down Arrow", BlockArrows, [25000, 25000, 25000, 48123]), - p!("quadArrowCallout", "Callout: Quad Arrow", BlockArrows, [18515, 18515, 18515, 48123]), - p!("mathPlus", "Plus Sign", EquationShapes, [23520]), - p!("mathMinus", "Minus Sign", EquationShapes, [23520]), - p!("mathMultiply", "Multiplication Sign", EquationShapes, [23520]), - p!("mathDivide", "Division Sign", EquationShapes, [23520, 5880, 11760]), - p!("mathEqual", "Equals", EquationShapes, [23520, 11760]), - p!("mathNotEqual", "Not Equal", EquationShapes, [23520, 6600000, 11760]), - p!("flowChartProcess", "Flowchart: Process", Flowchart, []), - p!("flowChartAlternateProcess", "Flowchart: Alternate Process", Flowchart, []), - p!("flowChartDecision", "Flowchart: Decision", Flowchart, []), - p!("flowChartInputOutput", "Flowchart: Data", Flowchart, []), - p!("flowChartPredefinedProcess", "Flowchart: Predefined Process", Flowchart, []), - p!("flowChartInternalStorage", "Flowchart: Internal Storage", Flowchart, []), - p!("flowChartDocument", "Flowchart: Document", Flowchart, []), - p!("flowChartMultidocument", "Flowchart: Multidocument", Flowchart, []), - p!("flowChartTerminator", "Flowchart: Terminator", Flowchart, []), - p!("flowChartPreparation", "Flowchart: Preparation", Flowchart, []), - p!("flowChartManualInput", "Flowchart: Manual Input", Flowchart, []), - p!("flowChartManualOperation", "Flowchart: Manual Operation", Flowchart, []), - p!("flowChartConnector", "Flowchart: Connector", Flowchart, []), - p!("flowChartOffpageConnector", "Flowchart: Off-page Connector", Flowchart, []), - p!("flowChartPunchedCard", "Flowchart: Card", Flowchart, []), - p!("flowChartPunchedTape", "Flowchart: Punched Tape", Flowchart, []), - p!("flowChartSummingJunction", "Flowchart: Summing Junction", Flowchart, []), - p!("flowChartOr", "Flowchart: Or", Flowchart, []), - p!("flowChartCollate", "Flowchart: Collate", Flowchart, []), - p!("flowChartSort", "Flowchart: Sort", Flowchart, []), - p!("flowChartExtract", "Flowchart: Extract", Flowchart, []), - p!("flowChartMerge", "Flowchart: Merge", Flowchart, []), - p!("flowChartOnlineStorage", "Flowchart: Stored Data", Flowchart, []), - p!("flowChartDelay", "Flowchart: Delay", Flowchart, []), - p!("flowChartMagneticTape", "Flowchart: Sequential Access Storage", Flowchart, []), - p!("flowChartMagneticDisk", "Flowchart: Magnetic Disk", Flowchart, []), - p!("flowChartMagneticDrum", "Flowchart: Direct Access Storage", Flowchart, []), - p!("flowChartDisplay", "Flowchart: Display", Flowchart, []), - p!("flowChartOfflineStorage", "Flowchart: Offline Storage", Flowchart, []), - p!("irregularSeal1", "Explosion: 8 Points", StarsAndBanners, []), - p!("irregularSeal2", "Explosion: 14 Points", StarsAndBanners, []), - p!("star4", "Star: 4 Points", StarsAndBanners, [12500]), - p!("star5", "Star: 5 Points", StarsAndBanners, [19098]), - p!("star6", "Star: 6 Points", StarsAndBanners, [28868]), - p!("star7", "Star: 7 Points", StarsAndBanners, [34601]), - p!("star8", "Star: 8 Points", StarsAndBanners, [37500]), - p!("star10", "Star: 10 Points", StarsAndBanners, [42533]), - p!("star12", "Star: 12 Points", StarsAndBanners, [37500]), - p!("star16", "Star: 16 Points", StarsAndBanners, [37500]), - p!("star24", "Star: 24 Points", StarsAndBanners, [37500]), - p!("star32", "Star: 32 Points", StarsAndBanners, [37500]), - p!("ribbon2", "Ribbon: Tilted Up", StarsAndBanners, [16667, 50000]), - p!("ribbon", "Ribbon: Tilted Down", StarsAndBanners, [16667, 50000]), - p!("ellipseRibbon2", "Ribbon: Curved and Tilted Up", StarsAndBanners, [25000, 50000, 12500]), - p!("ellipseRibbon", "Ribbon: Curved and Tilted Down", StarsAndBanners, [25000, 50000, 12500]), - p!("leftRightRibbon", "Ribbon: Left-Right Fold", StarsAndBanners, [50000, 50000, 16667]), - p!("verticalScroll", "Scroll: Vertical", StarsAndBanners, [12500]), - p!("horizontalScroll", "Scroll: Horizontal", StarsAndBanners, [12500]), - p!("wave", "Wave", StarsAndBanners, [12500, 0]), - p!("doubleWave", "Double Wave", StarsAndBanners, [6250, 0]), - p!("wedgeRectCallout", "Speech Bubble: Rectangle", Callouts, [-20833, 62500]), - p!("wedgeRoundRectCallout", "Speech Bubble: Rectangle with Corners Rounded", Callouts, [-20833, 62500, 16667]), - p!("wedgeEllipseCallout", "Speech Bubble: Oval", Callouts, [-20833, 62500]), - p!("cloudCallout", "Thought Bubble: Cloud", Callouts, [-20833, 62500]), - p!("borderCallout1", "Callout: Line", Callouts, [18750, -8333, 112500, -38333]), - p!("borderCallout2", "Callout: Bent Line", Callouts, [18750, -8333, 18750, -16667, 112500, -46667]), - p!("borderCallout3", "Callout: Double Bent Line", Callouts, [18750, -8333, 18750, -16667, 100000, -16667, 112963, -8333]), - p!("accentCallout1", "Callout: Line with Accent Bar", Callouts, [18750, -8333, 112500, -38333]), - p!("accentCallout2", "Callout: Bent Line with Accent Bar", Callouts, [18750, -8333, 18750, -16667, 112500, -46667]), - p!("accentCallout3", "Callout: Double Bent Line with Accent Bar", Callouts, [18750, -8333, 18750, -16667, 100000, -16667, 112963, -8333]), - p!("callout1", "Callout: Line with No Border", Callouts, [18750, -8333, 112500, -38333]), - p!("callout2", "Callout: Bent Line with No Border", Callouts, [18750, -8333, 18750, -16667, 112500, -46667]), - p!("callout3", "Callout: Double Bent Line with No Border", Callouts, [18750, -8333, 18750, -16667, 100000, -16667, 112963, -8333]), - p!("accentBorderCallout1", "Callout: Line with Border and Accent Bar", Callouts, [18750, -8333, 112500, -38333]), - p!("accentBorderCallout2", "Callout: Bent Line with Border and Accent Bar", Callouts, [18750, -8333, 18750, -16667, 112500, -46667]), - p!( - "accentBorderCallout3", - "Callout: Double Bent Line with Border and Accent Bar", - Callouts, - [18750, -8333, 18750, -16667, 100000, -16667, 112963, -8333] - ), - p!("actionButtonBackPrevious", "Action Button: Go Back or Previous", ActionButtons, []), - p!("actionButtonForwardNext", "Action Button: Go Forward or Next", ActionButtons, []), - p!("actionButtonBeginning", "Action Button: Go to Beginning", ActionButtons, []), - p!("actionButtonEnd", "Action Button: Go to End", ActionButtons, []), - p!("actionButtonHome", "Action Button: Go Home", ActionButtons, []), - p!("actionButtonInformation", "Action Button: Get Information", ActionButtons, []), - p!("actionButtonReturn", "Action Button: Go Back", ActionButtons, []), - p!("actionButtonMovie", "Action Button: Video", ActionButtons, []), - p!("actionButtonDocument", "Action Button: Document", ActionButtons, []), - p!("actionButtonSound", "Action Button: Sound", ActionButtons, []), - p!("actionButtonHelp", "Action Button: Help", ActionButtons, []), - p!("actionButtonBlank", "Action Button: Custom", ActionButtons, []), -]; - -pub fn info(name: &str) -> Option<&'static PresetInfo> { - CATALOG.iter().find(|p| p.name == name) -} - -/// Whether PowerPoint joins this preset's outline with sharp (miter) corners when the line names -/// no join (it rounds them otherwise). Observed per preset on its export: the plus, the right, -/// up and down block arrows (not the left one), chevrons, stars from five points up, the -/// equation shapes, curved ribbons and the action buttons are mitred. -pub fn mitred_by_default(name: &str) -> bool { - matches!( - name, - "plus" - | "rightArrow" - | "upArrow" - | "downArrow" - | "upDownArrow" - | "leftUpArrow" - | "bentUpArrow" - | "stripedRightArrow" - | "notchedRightArrow" - | "chevron" - | "leftArrowCallout" - | "leftRightArrowCallout" - | "upDownArrowCallout" - | "quadArrowCallout" - | "mathPlus" - | "mathMinus" - | "mathMultiply" - | "mathEqual" - | "mathNotEqual" - | "star5" - | "star6" - | "star8" - | "star10" - | "star12" - | "star16" - | "star24" - | "star32" - | "ellipseRibbon" - | "ellipseRibbon2" - ) || name.starts_with("actionButton") -} - -pub fn is_line_like(name: &str) -> bool { - matches!(name, "line" | "straightConnector1" | "bentConnector2" | "bentConnector3" | "curvedConnector3" | "arc") - || name.starts_with("bentConnector") - || name.starts_with("curvedConnector") -} diff --git a/crates/geom/src/preset/extra.rs b/crates/geom/src/preset/extra.rs deleted file mode 100644 index 8c61e5f11..000000000 --- a/crates/geom/src/preset/extra.rs +++ /dev/null @@ -1,799 +0,0 @@ -//! More preset outlines: line callouts, arrow callouts, curved and circular arrows, curved -//! ribbons, gears, tabs and chart markers. Like the rest of `preset`, every outline is our own -//! construction, fitted to how the shapes look and to what their adjust values mean. - -use super::{ - Corner, Dir, FillMode, Geometry, Handle, Pb, Point, Rect, Vec2, corner_rect, fill, fill_eo, fill_only, mid_sites, orient, shade, simple, - stroke_only, vis, -}; - -/// Builds the presets this module knows; `None` for any other name. -pub(super) fn build(name: &str, w: f64, h: f64, a: &dyn Fn(usize) -> f64) -> Option { - let ss = w.min(h); - let full = Rect::new(0.0, 0.0, w, h); - let mut b = Pb::new(); - let g = match name { - "lineInv" => { - let l = b.m(0.0, h).l(w, 0.0).take(); - Geometry { paths: vec![stroke_only(l)], text_rect: full, handles: vec![], sites: vec![Point::new(0.0, h), Point::new(w, 0.0)] } - } - "nonIsoscelesTrapezoid" => { - let max = 50000.0 * w / ss.max(1e-9); - let (v1, v2) = (a(0).clamp(0.0, max), a(1).clamp(0.0, max)); - let (d1, d2) = (ss * v1 / 1e5, ss * v2 / 1e5); - let mut g = simple(b.poly(&[(0.0, h), (d1, 0.0), (w - d2, 0.0), (w, h)]).take(), Rect::new(d1 * 0.66, h * 0.2, w - d2 * 0.66, h), w, h); - g.handles.push(Handle::new(0, Point::ZERO, Vec2::new(ss / 1e5, 0.0), v1, 0.0, max)); - g.handles.push(Handle::new(1, Point::new(w, 0.0), Vec2::new(-ss / 1e5, 0.0), v2, 0.0, max)); - g - } - "pieWedge" => { - b.m(0.0, h).arc(w, h, 180.0, 90.0).l(w, h).z(); - simple(b.take(), Rect::new(w * 0.29289, h * 0.29289, w, h), w, h) - } - "flowChartOfflineStorage" => { - let tri = b.poly(&[(0.0, 0.0), (w, 0.0), (w / 2.0, h)]).take(); - let bar = Pb::new().m(w * 0.4, h * 0.8).l(w * 0.6, h * 0.8).take(); - Geometry { - paths: vec![fill(tri), stroke_only(bar)], - text_rect: Rect::new(w / 4.0, 0.0, w * 0.75, h * 0.8), - handles: vec![], - sites: vec![Point::new(w / 2.0, 0.0), Point::new(w / 4.0, h / 2.0), Point::new(w / 2.0, h), Point::new(w * 0.75, h / 2.0)], - } - } - "chartX" | "chartStar" | "chartPlus" => { - let body = corner_rect(w, h, [Corner::Square; 4]); - let mut l = Pb::new(); - if name != "chartPlus" { - l.m(0.0, 0.0).l(w, h).m(0.0, h).l(w, 0.0); - } - if name != "chartX" { - l.m(w / 2.0, 0.0).l(w / 2.0, h); - } - if name == "chartPlus" { - l.m(0.0, h / 2.0).l(w, h / 2.0); - } - Geometry { paths: vec![fill_only(body), stroke_only(l.take())], text_rect: full, handles: vec![], sites: mid_sites(w, h) } - } - "cornerTabs" | "squareTabs" | "plaqueTabs" => { - // Each tab's size is a twentieth of the diagonal. - let d = (w.hypot(h) / 20.0).min(w / 2.0).min(h / 2.0); - match name { - "cornerTabs" => { - b.poly(&[(0.0, 0.0), (d, 0.0), (0.0, d)]); - b.poly(&[(w - d, 0.0), (w, 0.0), (w, d)]); - b.poly(&[(w, h - d), (w, h), (w - d, h)]); - b.poly(&[(0.0, h - d), (d, h), (0.0, h)]); - } - "squareTabs" => { - b.poly(&[(0.0, 0.0), (d, 0.0), (d, d), (0.0, d)]); - b.poly(&[(w - d, 0.0), (w, 0.0), (w, d), (w - d, d)]); - b.poly(&[(w - d, h - d), (w, h - d), (w, h), (w - d, h)]); - b.poly(&[(0.0, h - d), (d, h - d), (d, h), (0.0, h)]); - } - _ => { - if d > 0.0 { - b.m(0.0, 0.0).l(d, 0.0).arc(d, d, 0.0, 90.0).z(); - b.m(w, 0.0).l(w, d).arc(d, d, 90.0, 90.0).z(); - b.m(w, h).l(w - d, h).arc(d, d, 180.0, 90.0).z(); - b.m(0.0, h).l(0.0, h - d).arc(d, d, 270.0, 90.0).z(); - } else { - b.m(0.0, 0.0).z(); - } - } - } - Geometry { paths: vec![fill(b.take())], text_rect: full.inset(-d), handles: vec![], sites: mid_sites(w, h) } - } - "callout1" - | "callout2" - | "callout3" - | "accentCallout1" - | "accentCallout2" - | "accentCallout3" - | "borderCallout2" - | "borderCallout3" - | "accentBorderCallout1" - | "accentBorderCallout2" - | "accentBorderCallout3" => { - let n = match name.chars().last() { - Some('2') => 2, - Some('3') => 3, - _ => 1, - }; - line_callout(w, h, a, n + 1, name.starts_with("accent"), name.contains("order")) - } - "leftRightArrowCallout" | "upDownArrowCallout" => { - let vertical = name == "upDownArrowCallout"; - let (l, t) = if vertical { (h, w) } else { (w, h) }; - let ss = l.min(t); - let head = (ss * a(1).max(0.0) / 1e5).min(t / 2.0); - let shaft = (ss * a(0).max(0.0) / 1e5).min(head * 2.0); - let hl = (ss * a(2).max(0.0) / 1e5).min(l / 2.0); - let boxl = (l * a(3).max(0.0) / 1e5).min(l - 2.0 * hl); - let (c, b0, b1) = (t / 2.0, (l - boxl) / 2.0, (l + boxl) / 2.0); - let pts = [ - (0.0, c), - (hl, c - head), - (hl, c - shaft / 2.0), - (b0, c - shaft / 2.0), - (b0, 0.0), - (b1, 0.0), - (b1, c - shaft / 2.0), - (l - hl, c - shaft / 2.0), - (l - hl, c - head), - (l, c), - (l - hl, c + head), - (l - hl, c + shaft / 2.0), - (b1, c + shaft / 2.0), - (b1, t), - (b0, t), - (b0, c + shaft / 2.0), - (hl, c + shaft / 2.0), - (hl, c + head), - ]; - let d = if vertical { Dir::Down } else { Dir::Right }; - let pts = orient(d, w, h, &pts); - let tr = orient(d, w, h, &[(b0, 0.0), (b1, t)]); - simple(b.poly(&pts).take(), Rect::from_points(Point::new(tr[0].0, tr[0].1), Point::new(tr[1].0, tr[1].1)).abs(), w, h) - } - "quadArrowCallout" => { - let head = (ss * a(1).max(0.0) / 1e5).min(ss / 2.0); - let shaft = (ss * a(0).max(0.0) / 1e5).min(head * 2.0); - let hl = (ss * a(2).max(0.0) / 1e5).min(ss / 2.0); - let k = a(3).clamp(0.0, 100000.0) / 1e5; - let (bw, bh) = ((w * k).min(w - 2.0 * hl).max(shaft), (h * k).min(h - 2.0 * hl).max(shaft)); - let (cx, cy) = (w / 2.0, h / 2.0); - let (bx0, bx1, by0, by1) = (cx - bw / 2.0, cx + bw / 2.0, cy - bh / 2.0, cy + bh / 2.0); - let (s2, hd) = (shaft / 2.0, head); - let pts = [ - (0.0, cy), - (hl, cy - hd), - (hl, cy - s2), - (bx0, cy - s2), - (bx0, by0), - (cx - s2, by0), - (cx - s2, hl), - (cx - hd, hl), - (cx, 0.0), - (cx + hd, hl), - (cx + s2, hl), - (cx + s2, by0), - (bx1, by0), - (bx1, cy - s2), - (w - hl, cy - s2), - (w - hl, cy - hd), - (w, cy), - (w - hl, cy + hd), - (w - hl, cy + s2), - (bx1, cy + s2), - (bx1, by1), - (cx + s2, by1), - (cx + s2, h - hl), - (cx + hd, h - hl), - (cx, h), - (cx - hd, h - hl), - (cx - s2, h - hl), - (cx - s2, by1), - (bx0, by1), - (bx0, cy + s2), - (hl, cy + s2), - (hl, cy + hd), - ]; - simple(b.poly(&pts).take(), Rect::new(bx0, by0, bx1, by1), w, h) - } - "curvedRightArrow" | "curvedLeftArrow" | "curvedUpArrow" | "curvedDownArrow" => curved_arrow(name, w, h, a(0), a(1), a(2)), - "swooshArrow" => swoosh(w, h, a(0), a(1)), - "ellipseRibbon" | "ellipseRibbon2" => ellipse_ribbon(name == "ellipseRibbon2", w, h, a(0), a(1), a(2)), - "leftRightRibbon" => left_right_ribbon(w, h, a(0), a(1), a(2)), - "gear6" | "gear9" => gear(if name == "gear6" { 6 } else { 9 }, w, h, a(0), a(1)), - "funnel" => funnel(w, h), - "circularArrow" | "leftCircularArrow" | "leftRightCircularArrow" => circular_arrow(name, w, h, [a(0), a(1), a(2), a(3), a(4)]), - _ => return None, - }; - Some(g) -} - -/// An ellipse-centred frame for the circular arrows: the band's middle runs on the ellipse -/// `(rx, ry)`, its edges `th/2` either side. -struct Ring { - c: Point, - rx: f64, - ry: f64, - th: f64, - hw: f64, -} - -impl Ring { - /// The point at visual angle `deg` on the ellipse grown by `d`. - fn at(&self, deg: f64, d: f64) -> Point { - let (ax, ay) = ((self.rx + d).max(0.0), (self.ry + d).max(0.0)); - let t = vis(deg, ax, ay).to_radians(); - Point::new(self.c.x + ax * t.cos(), self.c.y + ay * t.sin()) - } - /// Parametric angle (degrees) of `p` on the ellipse grown by `d`. - fn param(&self, p: Point, d: f64) -> f64 { - let (ax, ay) = ((self.rx + d).max(1e-9), (self.ry + d).max(1e-9)); - ((p.y - self.c.y) / ay).atan2((p.x - self.c.x) / ax).to_degrees() - } - /// Where the line `b + s·u` meets the ellipse grown by `d`, taking the crossing nearest `b` - /// on the side `sign` (+1 outwards, −1 inwards). - fn cross(&self, b: Point, u: Vec2, d: f64, sign: f64) -> Point { - let (ax, ay) = ((self.rx + d).max(1e-9), (self.ry + d).max(1e-9)); - let (px, py) = ((b.x - self.c.x) / ax, (b.y - self.c.y) / ay); - let (ux, uy) = (u.x / ax, u.y / ay); - let qa = ux * ux + uy * uy; - let qb = 2.0 * (px * ux + py * uy); - let qc = px * px + py * py - 1.0; - let disc = qb * qb - 4.0 * qa * qc; - if qa < 1e-18 || disc < 0.0 { - // The line misses (a long head on a thin ring): the edge then carries on from the - // base centre itself, as the reference does. - return b; - } - let r = disc.sqrt(); - let (s0, s1) = ((-qb - r) / (2.0 * qa), (-qb + r) / (2.0 * qa)); - let s = if sign > 0.0 { - if s0 >= 0.0 { s0 } else { s1 } - } else if s1 <= 0.0 { - s1 - } else { - s0 - }; - b + u * s - } - /// An arrow head whose base centre sits on the middle ellipse at `base` degrees and whose tip - /// sits there at `base + sweep`. The base runs along the line from the centre to the tip. - /// Returns (band outer edge, outer wing, tip, inner wing, band inner edge). - fn head(&self, base: f64, sweep: f64) -> [Point; 5] { - let b = self.at(base, 0.0); - let tip = self.at(base + sweep, 0.0); - let d = tip - self.c; - let u = if d.hypot() > 1e-12 { d / d.hypot() } else { Vec2::new(1.0, 0.0) }; - let half = self.th / 2.0; - [self.cross(b, u, half, 1.0), b + u * self.hw, tip, b - u * self.hw, self.cross(b, u, -half, -1.0)] - } -} - -/// Sweep (degrees) from `a` to `b` turning one way: positive when `dir > 0`. -fn turn(a: f64, b: f64, dir: f64) -> f64 { - if dir > 0.0 { (b - a).rem_euclid(360.0) } else { -(a - b).rem_euclid(360.0) } -} - -/// The circular arrows: a band along an ellipse with one head (`circularArrow` clockwise, -/// `leftCircularArrow` anticlockwise) or a head at each end (`leftRightCircularArrow`). -/// Adjusts: band thickness, head sweep (degrees), end angle, start angle, head half-width. -fn circular_arrow(name: &str, w: f64, h: f64, a: [f64; 5]) -> Geometry { - let ss = w.min(h); - if ss <= 0.0 { - return simple(corner_rect(w, h, [Corner::Square; 4]), Rect::new(0.0, 0.0, w, h), w, h); - } - let a5 = a[4].clamp(0.0, 25000.0); - let hw = ss * a5 / 1e5; - let th = ss * a[0].clamp(0.0, 2.0 * a5) / 1e5; - let ring = Ring { c: Point::new(w / 2.0, h / 2.0), rx: (w / 2.0 - hw).max(th / 2.0), ry: (h / 2.0 - hw).max(th / 2.0), th, hw }; - let deg = |v: f64| (v / 60000.0) % 360.0; - let (sweep, end, start) = (deg(a[1]), deg(a[2]), deg(a[3])); - let half = th / 2.0; - let mut b = Pb::new(); - // Arcs of the ellipse grown by `d`, drawn on from the current point (which is on it except in - // the degenerate case above, where the arc shifts with it like the reference's). - let edge_arc = |b: &mut Pb, from: Point, to: Point, d: f64, dir: f64| { - let (ax, ay) = ((ring.rx + d).max(0.0), (ring.ry + d).max(0.0)); - let (s, e) = (ring.param(from, d), ring.param(to, d)); - b.arc(ax, ay, s, turn(s, e, dir)); - }; - let outer_arc = |b: &mut Pb, from: Point, to: Point, dir: f64| edge_arc(b, from, to, half, dir); - let inner_arc = |b: &mut Pb, from: Point, to: Point, dir: f64| edge_arc(b, from, to, -half, dir); - if name == "leftRightCircularArrow" { - let hs = ring.head(start, -sweep); - let he = ring.head(end, sweep); - b.m(hs[0].x, hs[0].y); - outer_arc(&mut b, hs[0], he[0], 1.0); - b.l(he[1].x, he[1].y).l(he[2].x, he[2].y).l(he[3].x, he[3].y).l(he[4].x, he[4].y); - inner_arc(&mut b, he[4], hs[4], -1.0); - b.l(hs[3].x, hs[3].y).l(hs[2].x, hs[2].y).l(hs[1].x, hs[1].y).z(); - } else { - let dir = if name == "circularArrow" { 1.0 } else { -1.0 }; - let he = ring.head(end, sweep); - let (o0, i0) = (ring.at(start, half), ring.at(start, -half)); - b.m(o0.x, o0.y); - outer_arc(&mut b, o0, he[0], dir); - b.l(he[1].x, he[1].y).l(he[2].x, he[2].y).l(he[3].x, he[3].y).l(he[4].x, he[4].y); - inner_arc(&mut b, he[4], i0, -dir); - b.z(); - } - simple(b.take(), Rect::new(0.0, 0.0, w, h), w, h) -} - -/// A funnel: an elliptical rim (with an open mouth) across the top quarter, and straight sides -/// down to a small rounded spout. The side lines leave the rim and meet the spout at fixed -/// angles, fitted to the reference look. -fn funnel(w: f64, h: f64) -> Geometry { - const RIM: f64 = 173.0; // where the left side leaves the rim, degrees on the rim ellipse - const SPOUT: f64 = 163.4; // where it meets the spout, degrees on the spout ellipse - let ss = w.min(h); - let (cx, rim_y) = (w / 2.0, h / 4.0); - let (sx, sy) = (w / 8.0, h / 15.0); - let spout_y = h - sy; - let at = |rx: f64, ry: f64, cy: f64, deg: f64| { - let t = deg.to_radians(); - Point::new(cx + rx * t.cos(), cy + ry * t.sin()) - }; - let p0 = at(cx, rim_y, rim_y, RIM); - let p1 = at(sx, sy, spout_y, 180.0 - SPOUT); - let mut b = Pb::new(); - b.m(p0.x, p0.y).arc(cx, rim_y, RIM, 540.0 - 2.0 * RIM); - b.l(p1.x, p1.y).arc(sx, sy, 180.0 - SPOUT, 2.0 * SPOUT - 180.0).z(); - let d = ss / 20.0; - b.ellipse(cx, rim_y, (cx - d).max(0.0), (rim_y - d).max(0.0)); - Geometry { paths: vec![fill_eo(b.take())], text_rect: Rect::new(w / 4.0, h / 2.0, w * 0.75, h - sy), handles: vec![], sites: mid_sites(w, h) } -} - -/// A gear: an elliptical body with `n` teeth, the first pointing straight up. Each tooth leaves -/// the body at two points an equal angle either side of its centre, and its tip corners sit a -/// tooth height further out along the body's normal and a flank lean further in. -fn gear(n: usize, w: f64, h: f64, a0: f64, a1: f64) -> Geometry { - let ss = w.min(h); - let th = ss * a0.clamp(0.0, 20000.0) / 1e5; // tooth height - let lean_max = if n == 6 { 5380.0 } else { 2730.0 }; - let l = ss * a1.clamp(0.0, a0.clamp(0.0, 20000.0).min(lean_max)) / 1e5; // flank lean - let (cx, cy) = (w / 2.0, h / 2.0); - let (rx, ry) = ((cx - th).max(0.0), (cy - th).max(0.0)); - let r = (ss / 2.0 - th).max(1e-9); - let half = ((th + l) / 2.0 / r).atan(); - let step = std::f64::consts::TAU / n as f64; - let on_body = |t: f64| Point::new(cx + rx * t.cos(), cy + ry * t.sin()); - let mut b = Pb::new(); - for k in 0..n { - let t = -std::f64::consts::FRAC_PI_2 + step * k as f64; - // The tooth stands along the body's normal at its centre. - let nrm = Vec2::new(t.cos() * ry, t.sin() * rx); - let u = if nrm.hypot() > 1e-12 { nrm / nrm.hypot() } else { Vec2::new(t.cos(), t.sin()) }; - let v = Vec2::new(-u.y, u.x); - let (r0, r1) = (on_body(t - half), on_body(t + half)); - let (c0, c1) = (r0 + u * th + v * l, r1 + u * th - v * l); - if k == 0 { - b.m(r0.x, r0.y); - } else { - b.arc(rx, ry, (t - step + half).to_degrees(), (step - 2.0 * half).to_degrees()); - } - b.l(c0.x, c0.y).l(c1.x, c1.y).l(r1.x, r1.y); - } - let t_last = -std::f64::consts::FRAC_PI_2 + step * (n - 1) as f64; - b.arc(rx, ry, (t_last + half).to_degrees(), (step - 2.0 * half).to_degrees()).z(); - let k = std::f64::consts::FRAC_1_SQRT_2; - let text = Rect::new(cx - rx * k, cy - ry * k, cx + rx * k, cy + ry * k); - simple(b.take(), text, w, h) -} - -/// Two arrows on a band that steps down in the middle: the left arrow sits high, the right one low, -/// and the band rolls over between them in a shaded half-ellipse curl. -fn left_right_ribbon(w: f64, h: f64, a0: f64, a1: f64, a2: f64) -> Geometry { - let ss = w.min(h); - let sh = h * a2.clamp(0.0, 33333.0) / 1e5; // step between the two halves - let bt = (h * a0.max(0.0) / 1e5).min(h - sh); // band thickness - let cx = w / 2.0; - let (rx, ry) = (w / 32.0, (sh / 4.0).min(w / 24.0)); - let hb = (ss * a1.max(0.0) / 1e5).min(cx - rx); // head length - let yc = (h - sh) / 2.0; - let (lt, lb) = (yc - bt / 2.0, yc + bt / 2.0); - let (rt, rb) = (lt + sh, lb + sh); - // The left half: filled as a closed outline, stroked only where it can show. - let mut edge = Pb::new(); - edge.m(cx - rx, lb).l(hb, lb).l(hb, h - sh).l(0.0, yc).l(hb, 0.0).l(hb, lt).l(cx, lt); - edge.arc(rx, ry, 270.0, 180.0).arc(rx, ry, 270.0, -90.0); - let edge = edge.take(); - let mut left = Pb::new(); - left.m(0.0, yc).l(hb, 0.0).l(hb, lt).l(cx, lt).arc(rx, ry, 270.0, 180.0).arc(rx, ry, 270.0, -180.0); - left.l(cx, lb.max(lt + 4.0 * ry)).l(hb, lb).l(hb, h - sh).z(); - let left = left.take(); - let mut curl = Pb::new(); - curl.m(cx + rx, lt + ry).l(cx + rx, rt).l(cx, lt + 4.0 * ry).arc(rx, ry, 90.0, 180.0).arc(rx, ry, 90.0, -90.0).z(); - let mut right = Pb::new(); - right.m(w, yc + sh).l(w - hb, h).l(w - hb, rb).l(cx, rb).arc(rx, ry, 90.0, 90.0).l(cx - rx, rt - ry).arc(rx, ry, 180.0, -90.0); - right.l(w - hb, rt).l(w - hb, sh).z(); - Geometry { - paths: vec![fill_only(left), stroke_only(edge), shade(curl.take(), FillMode::DarkenLess), fill(right.take())], - text_rect: Rect::new(hb.min(cx - rx), rt, (w - hb).max(cx + rx), lb.max(rt)), - handles: vec![], - sites: vec![Point::new(0.0, yc), Point::new(cx, rt), Point::new(w, yc + sh), Point::new(cx, lb)], - } -} - -/// Adds a piece of the parabola `y = y0 + d·(1 − ((x − w/2)/(w/2))²)` from the current point (at -/// `xa`) to `xb`, as one quadratic curve. -fn sag(b: &mut Pb, w: f64, d: f64, y0: f64, xa: f64, xb: f64) { - let hw = (w / 2.0).max(1e-9); - let f = |x: f64| y0 + d * (1.0 - ((x - hw) / hw).powi(2)); - let slope = -2.0 * d * (xa - hw) / (hw * hw); - b.q((xa + xb) / 2.0, f(xa) + slope * (xb - xa) / 2.0, xb, f(xb)); -} - -/// A ribbon whose edges sag along one parabola: a front band in the middle and two notched ends -/// behind it, joined by shaded folds. Built sagging downwards; `up` mirrors it vertically. -fn ellipse_ribbon(up: bool, w: f64, h: f64, a0: f64, a1: f64, a2: f64) -> Geometry { - let th = h * a0.clamp(0.0, 100000.0) / 1e5; // band drop at the centre - // Sag of every edge: never more than the drop, never so little that the band would rise - // above the ends by more than half their height. - let d = (h * a2.max(0.0) / 1e5).max(th - (h - th) / 2.0).clamp(0.0, th); - let bw = w * a1.clamp(25000.0, 75000.0) / 1e5; - let (x0, x1) = ((w - bw) / 2.0, (w + bw) / 2.0); - let ear = w / 8.0; - let (xf, xg) = (x0 + ear, x1 - ear); - let e = h - th; // band height - let off = th - d; // band top below the ends' top - let t = |x: f64| { - let hw = (w / 2.0).max(1e-9); - d * (1.0 - ((x - hw) / hw).powi(2)) - }; - let mut ends = Pb::new(); - ends.m(0.0, 0.0); - sag(&mut ends, w, d, 0.0, 0.0, xf); - ends.l(xf, t(xf) + off).l(x0, t(x0) + off).l(x0, t(x0) + e); - sag(&mut ends, w, d, e, x0, 0.0); - ends.l(ear, t(ear) + e / 2.0).z(); - ends.m(w, 0.0).l(w - ear, t(w - ear) + e / 2.0).l(w, e); - sag(&mut ends, w, d, e, w, x1); - ends.l(x1, t(x1) + off).l(xg, t(xg) + off).l(xg, t(xg)); - sag(&mut ends, w, d, 0.0, xg, w); - ends.z(); - let mut folds = Pb::new(); - folds.poly(&[(x0, t(x0) + off), (xf, t(xf)), (xf, t(xf) + off)]); - folds.poly(&[(x1, t(x1) + off), (xg, t(xg)), (xg, t(xg) + off)]); - let mut band = Pb::new(); - band.m(x0, t(x0) + off); - sag(&mut band, w, d, off, x0, x1); - band.l(x1, t(x1) + off + e); - sag(&mut band, w, d, off + e, x1, x0); - band.z(); - let mut paths = vec![fill(ends.take()), shade(folds.take(), FillMode::DarkenLess), fill(band.take())]; - let mut text = Rect::new(x0, th, x1, t(x0) + off + e); - if up { - let m = kurbo::Affine::new([1.0, 0.0, 0.0, -1.0, 0.0, h]); - for p in &mut paths { - p.path.apply_affine(m); - } - text = m.transform_rect_bbox(text); - } - Geometry { paths, text_rect: text, handles: vec![], sites: mid_sites(w, h) } -} - -/// A sweeping arrow rising from the bottom-left corner. The band's two edges are quadratic curves -/// from the corner; the head's base leans slightly forward and reaches one eighth of the shorter -/// side above and below the band. The tilt and the tip's lift were fitted to the reference look. -fn swoosh(w: f64, h: f64, a0: f64, a1: f64) -> Geometry { - const TILT: f64 = 0.1126; // tan of the head base's lean from vertical - const LIFT: f64 = 0.051; // tip height above the band's centre, per unit of height - let ss = w.min(h); - let e = ss / 8.0; - let th = (h * a0.max(0.0) / 1e5).min((h - 2.0 * e).max(0.0)); - // The head is at least long enough to keep its leaning base inside the frame. - let hl = (ss * a1.max(0.0) / 1e5).max((e + th) * TILT).min((w - e * TILT).max(0.0)); - let qx = w - hl; - let mut b = Pb::new(); - b.m(0.0, h) - .q(w / 6.0, h / 3.0, qx, e) - .l(qx - e * TILT, 0.0) - .l(w, (e + th / 2.0 - LIFT * h).clamp(0.0, 2.0 * e + th)) - .l((qx + (e + th) * TILT).min(w), 2.0 * e + th) - .l((qx + th * TILT).min(w), e + th) - .q(w / 4.0, (th + h / 12.0 + e).min(h), 0.0, h) - .z(); - simple(b.take(), Rect::new(0.0, 0.0, w, h), w, h) -} - -/// A band that sweeps around half an ellipse and ends in an arrow head. Built pointing right -/// (`curvedRightArrow`) in a `cw`×`ch` frame, then turned for the other directions. -/// -/// Both halves of the band hang off one ellipse touching the far side: its centre sits on the -/// head side's edge, its horizontal radius is the full length, and the band has a constant -/// vertical thickness. The back half (shaded) starts flat against the head side; the front half -/// runs to the head, centred on the band where it ends. -fn curved_arrow(name: &str, w: f64, h: f64, a0: f64, a1: f64, a2: f64) -> Geometry { - let along_x = matches!(name, "curvedRightArrow" | "curvedLeftArrow"); - let (cw, ch) = if along_x { (w, h) } else { (h, w) }; - let ss = cw.min(ch); - let head = (ss * a1.max(0.0) / 1e5).min(ch / 2.0); - let th = (ss * a0.max(0.0) / 1e5).min(head); - let hl = (ss * a2.max(0.0) / 1e5).min(cw); - let hh = head / 2.0; - // The band's centre line, carried on to the head side, ends at the tip, which sits half a - // head width above the bottom. - let r = ((ch - hh - th / 2.0) / 2.0).max(0.0); - // Parametric angle where the front band reaches the head base. - let te = if cw > 0.0 { (-(hl / cw)).clamp(-1.0, 1.0).acos().to_degrees() } else { 90.0 }; - let mut back = Pb::new(); - back.m(cw, 0.0).arc(cw, r, 270.0, -90.0).l(0.0, r + th).arc(cw, r, 180.0, 90.0).z(); - let mut front = Pb::new(); - front.m(0.0, r).arc(cw, r, 180.0, te - 180.0); - let yb = front.cur.y; - let yc = yb + th / 2.0; - front.l(cw - hl, yc - hh).l(cw, 2.0 * r + th / 2.0).l(cw - hl, yc + hh).l(cw - hl, yb + th).arc(cw, r, te, 180.0 - te).z(); - let m = match name { - "curvedLeftArrow" => kurbo::Affine::new([-1.0, 0.0, 0.0, 1.0, w, 0.0]), - "curvedUpArrow" => kurbo::Affine::new([0.0, -1.0, 1.0, 0.0, 0.0, h]), - "curvedDownArrow" => kurbo::Affine::new([0.0, 1.0, 1.0, 0.0, 0.0, 0.0]), - _ => kurbo::Affine::IDENTITY, - }; - let (mut back, mut front) = (back.take(), front.take()); - back.apply_affine(m); - front.apply_affine(m); - Geometry { - paths: vec![shade(back, FillMode::DarkenLess), fill(front)], - text_rect: Rect::new(0.0, 0.0, w, h), - handles: vec![], - sites: mid_sites(w, h), - } -} - -/// A rectangle with a callout leader through `pts` points (`(y, x)` adjust pairs in 1/100 000 of -/// the height and width), optionally with an accent bar at the first point's x and a border. -fn line_callout(w: f64, h: f64, a: &dyn Fn(usize) -> f64, pts: usize, accent: bool, border: bool) -> Geometry { - let body = corner_rect(w, h, [Corner::Square; 4]); - // Leaders may reach well outside the box, but not without bound. - let pt = |i: usize| (w * a(2 * i + 1).clamp(-1e7, 1e7) / 1e5, h * a(2 * i).clamp(-1e7, 1e7) / 1e5); - let mut l = Pb::new(); - let (x0, y0) = pt(0); - l.m(x0, y0); - for i in 1..pts { - let (x, y) = pt(i); - l.l(x, y); - } - let mut paths = vec![if border { fill(body) } else { fill_only(body) }]; - if accent { - paths.push(stroke_only(Pb::new().m(x0, 0.0).l(x0, h).take())); - } - paths.push(stroke_only(l.take())); - Geometry { paths, text_rect: Rect::new(0.0, 0.0, w, h), handles: vec![], sites: mid_sites(w, h) } -} - -#[cfg(test)] -mod tests { - use super::super::{CATALOG, FillMode, build, info}; - use kurbo::{BezPath, PathEl, Point, Shape}; - - const NEW: [&str; 38] = [ - "lineInv", - "nonIsoscelesTrapezoid", - "pieWedge", - "leftRightArrowCallout", - "upDownArrowCallout", - "quadArrowCallout", - "circularArrow", - "leftCircularArrow", - "leftRightCircularArrow", - "curvedRightArrow", - "curvedLeftArrow", - "curvedUpArrow", - "curvedDownArrow", - "swooshArrow", - "callout1", - "callout2", - "callout3", - "accentCallout1", - "accentCallout2", - "accentCallout3", - "borderCallout2", - "borderCallout3", - "accentBorderCallout1", - "accentBorderCallout2", - "accentBorderCallout3", - "ellipseRibbon", - "ellipseRibbon2", - "leftRightRibbon", - "flowChartOfflineStorage", - "gear6", - "gear9", - "funnel", - "cornerTabs", - "squareTabs", - "plaqueTabs", - "chartX", - "chartStar", - "chartPlus", - ]; - - fn outline(name: &str, w: f64, h: f64, adj: &[f64]) -> BezPath { - build(name, w, h, adj).map(|g| g.outline()).unwrap_or_default() - } - - /// Distance from `p` to the nearest point of the (flattened) outline. - fn dist(path: &BezPath, p: Point) -> f64 { - let mut best = f64::MAX; - let mut prev = Point::ZERO; - let mut start = Point::ZERO; - kurbo::flatten(path.iter(), 0.01, |el| { - let (a, b) = match el { - PathEl::MoveTo(q) => { - prev = q; - start = q; - return; - } - PathEl::LineTo(q) => (prev, q), - PathEl::ClosePath => (prev, start), - _ => return, - }; - let d = b - a; - let t = if d.hypot2() > 0.0 { ((p - a).dot(d) / d.hypot2()).clamp(0.0, 1.0) } else { 0.0 }; - best = best.min((a + d * t - p).hypot()); - prev = b; - }); - best - } - - /// Asserts every point lies within 1pt of the outline. - fn on(name: &str, w: f64, h: f64, adj: &[f64], pts: &[(f64, f64)]) { - let path = outline(name, w, h, adj); - for &(x, y) in pts { - let d = dist(&path, Point::new(x, y)); - assert!(d < 1.0, "{name} {w}x{h} {adj:?}: ({x}, {y}) is {d:.2} from the outline"); - } - } - - #[test] - fn new_presets_are_in_the_catalog() { - for n in NEW { - let i = info(n).unwrap_or_else(|| panic!("{n} missing from the catalog")); - assert!(!i.label.is_empty()); - } - assert!(CATALOG.len() >= 183); - } - - #[test] - fn new_presets_build_within_bounds_at_many_sizes_and_adjusts() { - let sizes = [(480.0, 300.0), (300.0, 300.0), (200.0, 460.0), (100.0, 460.0), (1.0, 1.0), (0.0, 0.0), (0.0, 50.0), (60.0, 0.0)]; - let adjusts: [&[f64]; 8] = [ - &[], - &[0.0; 8], - &[100000.0; 8], - &[-50000.0; 8], - &[1e12, -1e12, 1e12, -1e12, 1e12, -1e12, 1e12, -1e12], - &[f64::MAX, f64::MIN, f64::MAX, f64::MIN, f64::MAX, f64::MIN, f64::MAX, f64::MIN], - &[f64::NAN, f64::INFINITY, f64::NEG_INFINITY, f64::NAN, 5.0, 6.0, 7.0, 8.0], - &[30000.0, 60000.0, 20000.0, 9000000.0, 20000.0, 40000.0, 120000.0, -30000.0], - ]; - for n in NEW { - // Line callouts' leaders may reach anywhere, by design. - let callout = n.contains("allout") && !n.contains("Arrow"); - for (w, h) in sizes { - for adj in adjusts { - let g = build(n, w, h, adj).unwrap_or_else(|| panic!("{n} did not build")); - assert!(!g.paths.is_empty(), "{n} has no paths"); - for s in &g.paths { - let bb = s.path.bounding_box(); - assert!(bb.x0.is_finite() && bb.y0.is_finite() && bb.x1.is_finite() && bb.y1.is_finite(), "{n} {w}x{h} {adj:?}: {bb:?}"); - if !callout { - // Circular arrows with a head longer than their ring can hold carry the - // inner edge on from the head, as the reference does, so may spill. - let spill = if n.contains("ircular") { 0.5 } else { 0.01 }; - let tol = 0.5 + w.max(h) * spill; - assert!( - bb.x0 >= -tol && bb.y0 >= -tol && bb.x1 <= w + tol && bb.y1 <= h + tol, - "{n} {w}x{h} {adj:?} out of bounds: {bb:?}" - ); - } - } - let t = g.text_rect; - assert!(t.x0.is_finite() && t.y0.is_finite() && t.x1.is_finite() && t.y1.is_finite(), "{n} text rect {t:?}"); - } - } - let g = build(n, 480.0, 300.0, &[]).unwrap_or_else(|| panic!("{n}")); - assert!(g.outline().elements().len() >= 2, "{n} default outline is empty"); - } - } - - // The spot checks below are outline points measured on reference renders. - - #[test] - fn simple_new_presets_match_reference_points() { - on("lineInv", 480.0, 300.0, &[], &[(0.0, 300.0), (480.0, 0.0)]); - on("nonIsoscelesTrapezoid", 480.0, 300.0, &[], &[(75.0, 0.0), (405.0, 0.0), (0.0, 300.0)]); - on("nonIsoscelesTrapezoid", 200.0, 460.0, &[80000.0, 20000.0], &[(100.0, 0.0), (160.0, 0.0)]); - on("pieWedge", 480.0, 300.0, &[], &[(64.3, 150.0), (0.0, 300.0), (480.0, 0.0)]); - on("flowChartOfflineStorage", 480.0, 300.0, &[], &[(240.0, 300.0), (192.0, 240.0), (288.0, 240.0)]); - on("squareTabs", 480.0, 300.0, &[], &[(28.3, 28.3), (451.7, 271.7)]); - on("cornerTabs", 480.0, 300.0, &[], &[(23.3, 5.0)]); - on("plaqueTabs", 480.0, 300.0, &[], &[(27.85, 5.0)]); - on("chartStar", 480.0, 300.0, &[], &[(240.0, 0.0), (240.0, 300.0), (48.0, 30.0)]); - on("chartPlus", 480.0, 300.0, &[], &[(0.0, 150.0), (240.0, 0.0)]); - // Chart markers and plain callouts leave the box unstroked. - for n in ["chartX", "callout1", "accentCallout2"] { - let g = build(n, 100.0, 100.0, &[]).unwrap_or_else(|| panic!("{n}")); - assert!(!g.paths[0].stroke, "{n}"); - } - } - - #[test] - fn line_callouts_follow_their_adjusts() { - on("callout3", 480.0, 300.0, &[], &[(-40.0, 56.25), (-80.0, 56.25), (-80.0, 300.0), (-40.0, 338.9)]); - let adj = [50000.0, 110000.0, 20000.0, 120000.0, -20000.0, 80000.0, 30000.0, 40000.0]; - let g = build("accentBorderCallout3", 480.0, 300.0, &adj).unwrap_or_else(|| panic!("accentBorderCallout3")); - assert_eq!(g.paths.len(), 3); - assert!(g.paths[0].stroke); - let accent = g.paths[1].path.bounding_box(); - assert!((accent.x0 - 528.0).abs() < 1e-6 && accent.y0 == 0.0 && accent.y1 == 300.0, "{accent:?}"); - on("accentBorderCallout3", 480.0, 300.0, &adj, &[(576.0, 60.0), (384.0, -60.0), (192.0, 90.0)]); - } - - #[test] - fn arrow_callouts_match_reference_points() { - on("leftRightArrowCallout", 480.0, 300.0, &[], &[(0.0, 150.0), (75.0, 75.0), (124.5, 0.0), (355.5, 300.0), (480.0, 150.0)]); - on("leftRightArrowCallout", 200.0, 460.0, &[], &[(50.0, 180.0), (52.0, 0.0), (148.0, 460.0)]); - on("upDownArrowCallout", 480.0, 300.0, &[], &[(240.0, 0.0), (0.0, 77.8), (480.0, 222.2), (240.0, 300.0)]); - on("quadArrowCallout", 480.0, 300.0, &[], &[(0.0, 150.0), (124.5, 77.8), (240.0, 0.0), (480.0, 150.0), (240.0, 300.0)]); - } - - #[test] - fn curved_arrows_match_reference_points() { - on( - "curvedRightArrow", - 480.0, - 300.0, - &[], - &[(480.0, 0.0), (480.0, 75.0), (480.0, 225.0), (405.0, 149.0), (405.0, 299.0), (100.0, 151.5), (300.0, 6.7)], - ); - on("curvedRightArrow", 200.0, 460.0, &[30000.0, 60000.0, 40000.0], &[(200.0, 400.0), (120.0, 324.5), (120.0, 443.5), (200.0, 60.0)]); - // The band never outgrows the head; the head never outgrows half the frame. - on("curvedRightArrow", 200.0, 460.0, &[60000.0, 30000.0, 80000.0], &[(200.0, 60.0)]); - on("curvedLeftArrow", 480.0, 300.0, &[], &[(0.0, 225.0), (0.0, 0.0)]); - on("curvedUpArrow", 480.0, 300.0, &[], &[(405.0, 0.0), (0.0, 0.0), (75.0, 0.0)]); - on("curvedDownArrow", 480.0, 300.0, &[], &[(405.0, 300.0), (0.0, 300.0)]); - let g = build("curvedRightArrow", 480.0, 300.0, &[]).unwrap_or_else(|| panic!("curvedRightArrow")); - assert_eq!(g.paths[0].fill, FillMode::DarkenLess); - } - - #[test] - fn swoosh_matches_reference_points() { - on("swooshArrow", 480.0, 300.0, &[], &[(0.0, 300.0), (425.8, 0.0), (480.0, 59.7), (442.8, 150.0), (202.0, 105.5), (202.0, 159.0)]); - on("swooshArrow", 480.0, 300.0, &[40000.0, 16667.0], &[(480.0, 82.2), (447.8, 195.0)]); - on("swooshArrow", 200.0, 460.0, &[], &[(163.9, 0.0), (200.0, 59.4)]); - } - - #[test] - fn ribbons_match_reference_points() { - on( - "ellipseRibbon", - 480.0, - 300.0, - &[], - &[(0.0, 0.0), (120.0, 28.1), (60.0, 128.9), (240.0, 300.0), (120.0, 66.1), (180.0, 72.2), (180.0, 35.2)], - ); - on("ellipseRibbon", 480.0, 300.0, &[30000.0, 60000.0, 20000.0], &[(120.0, 45.0), (240.0, 300.0), (96.0, 68.4)]); - on("ellipseRibbon", 480.0, 300.0, &[80000.0, 20000.0, 60000.0], &[(240.0, 240.0), (1.0, 61.75)]); - on("ellipseRibbon2", 480.0, 300.0, &[], &[(0.0, 300.0), (240.0, 0.0)]); - on( - "leftRightRibbon", - 480.0, - 300.0, - &[], - &[(0.0, 125.0), (150.0, 0.0), (150.0, 50.0), (255.0, 62.5), (225.0, 87.5), (480.0, 175.0), (330.0, 300.0)], - ); - on("leftRightRibbon", 480.0, 300.0, &[90000.0, 10000.0, 60000.0], &[(0.0, 100.0), (480.0, 200.0), (240.0, 300.0)]); - } - - #[test] - fn gears_and_funnel_match_reference_points() { - // Square gear6: body radius 105, top tooth tip 3.5 inside the frame, tip half-width ~16.3. - on("gear6", 300.0, 300.0, &[], &[(150.0, 3.5), (133.7, 3.5), (166.3, 3.5), (45.0, 150.0)]); - on("gear9", 300.0, 300.0, &[], &[(150.0, 1.0), (30.0, 150.0)]); - on("gear6", 480.0, 300.0, &[], &[(240.0, 3.5), (201.0, 3.5)]); - on("funnel", 480.0, 300.0, &[], &[(240.0, 0.0), (0.0, 75.0), (240.0, 15.0), (15.0, 75.0), (240.0, 300.0), (60.5, 150.0)]); - let g = build("funnel", 480.0, 300.0, &[]).unwrap_or_else(|| panic!("funnel")); - assert!(g.paths[0].even_odd); - } - - #[test] - fn circular_arrows_match_reference_points() { - on("circularArrow", 300.0, 300.0, &[], &[(19.0, 150.0), (56.5, 150.0), (150.0, 19.0), (262.4, 150.0), (218.6, 113.4), (293.6, 113.4)]); - on( - "circularArrow", - 300.0, - 300.0, - &[20000.0, 1800000.0, 18000000.0, 5400000.0, 20000.0], - &[(150.0, 270.0), (150.0, 210.0), (247.0, 42.1), (143.0, 102.1), (227.9, 105.0)], - ); - on("leftCircularArrow", 300.0, 300.0, &[], &[(37.6, 150.0), (262.4, 150.0), (150.0, 281.0)]); - on("leftRightCircularArrow", 300.0, 300.0, &[], &[(262.4, 150.0), (37.6, 150.0), (150.0, 19.0)]); - // The band never grows past twice the head's half-width. - on("circularArrow", 300.0, 300.0, &[25000.0, 1142319.0, 20457681.0, 10800000.0, 5000.0], &[(0.0, 150.0), (30.0, 150.0)]); - } -} diff --git a/crates/geom/src/preset/shapes.rs b/crates/geom/src/preset/shapes.rs deleted file mode 100644 index 156475435..000000000 --- a/crates/geom/src/preset/shapes.rs +++ /dev/null @@ -1,375 +0,0 @@ -use super::builder::{Corner, Pb, corner_rect, fill, mid_sites, shade, simple, stroke_only, tip_handle}; -use super::catalog::{FillMode, Geometry}; -use super::{Point, Rect}; - -pub(super) fn wedge_rect(w: f64, h: f64, a0: f64, a1: f64, r: f64) -> Geometry { - let tip = Point::new(w / 2.0 + w * a0 / 1e5, h / 2.0 + h * a1 / 1e5); - let inside = tip.x > 0.0 && tip.x < w && tip.y > 0.0 && tip.y < h; - let (dx, dy) = ((tip.x - w / 2.0) / w.max(1e-9), (tip.y - h / 2.0) / h.max(1e-9)); - let mut b = Pb::new(); - let r = r.min(w / 2.0).min(h / 2.0); - // Walk clockwise from the top-left; insert the wedge on the edge facing the tip. - let horiz = dx.abs() > dy.abs(); - // The wedge's base: 2..5 twelfths of the edge on the tip's side of the centre when it is - // before it, 7..10 twelfths when after (presetShapeDefinitions' xg1/xg2, yg1/yg2). - let (bx0, bx1) = if tip.x < w / 2.0 { (w * 2.0 / 12.0, w * 5.0 / 12.0) } else { (w * 7.0 / 12.0, w * 10.0 / 12.0) }; - let (by0, by1) = if tip.y < h / 2.0 { (h * 2.0 / 12.0, h * 5.0 / 12.0) } else { (h * 7.0 / 12.0, h * 10.0 / 12.0) }; - b.m(r, 0.0); - if !inside && !horiz && dy < 0.0 { - b.l(bx0, 0.0).l(tip.x, tip.y).l(bx1, 0.0); - } - b.l(w - r, 0.0); - if r > 0.0 { - b.arc(r, r, 270.0, 90.0); - } - if !inside && horiz && dx > 0.0 { - b.l(w, by0).l(tip.x, tip.y).l(w, by1); - } - b.l(w, h - r); - if r > 0.0 { - b.arc(r, r, 0.0, 90.0); - } - if !inside && !horiz && dy > 0.0 { - b.l(bx1, h).l(tip.x, tip.y).l(bx0, h); - } - b.l(r, h); - if r > 0.0 { - b.arc(r, r, 90.0, 90.0); - } - if !inside && horiz && dx < 0.0 { - b.l(0.0, by1).l(tip.x, tip.y).l(0.0, by0); - } - b.l(0.0, r); - if r > 0.0 { - b.arc(r, r, 180.0, 90.0); - } - b.z(); - let mut g = simple(b.take(), Rect::new(0.0, 0.0, w, h).inset(-r * 0.29289), w, h); - g.handles.push(tip_handle(w, h, tip)); - g -} - -/// ECMA-376 cloud outline arcs (radii in 43200ths of the box, angles in 60000ths of a degree, -/// as DrawingML `arcTo` takes them), from the start point (3900, 14370). -const CLOUD_ARCS: [(f64, f64, f64, f64); 11] = [ - (6753.0, 9190.0, -11429249.0, 7426832.0), - (5333.0, 7267.0, -8646143.0, 5396714.0), - (4365.0, 5945.0, -8748475.0, 5983381.0), - (4857.0, 6595.0, -7859164.0, 7034504.0), - (5333.0, 7273.0, -4722533.0, 6541615.0), - (6775.0, 9220.0, -2776035.0, 7816140.0), - (5785.0, 7867.0, 37501.0, 6842000.0), - (6752.0, 9215.0, 1347096.0, 6910353.0), - (7720.0, 10543.0, 3974558.0, 4542661.0), - (4360.0, 5918.0, -16496525.0, 8804134.0), - (4345.0, 5945.0, -14809710.0, 9151131.0), -]; - -/// The cloud's creases: short arcs inside the outline, each from its own start point. -const CLOUD_CREASES: [(f64, f64, f64, f64, f64, f64); 11] = [ - (4693.0, 26177.0, 4345.0, 5945.0, 5204520.0, 1585770.0), - (6928.0, 34899.0, 4360.0, 5918.0, 4416628.0, 686848.0), - (16478.0, 39090.0, 6752.0, 9215.0, 8257449.0, 844866.0), - (28827.0, 34751.0, 6752.0, 9215.0, 387196.0, 959901.0), - (34129.0, 22954.0, 5785.0, 7867.0, -4217541.0, 4255042.0), - (41798.0, 15354.0, 5333.0, 7273.0, 1819082.0, 1665090.0), - (38324.0, 5426.0, 4857.0, 6595.0, -824660.0, 891534.0), - (29078.0, 3952.0, 4857.0, 6595.0, -8950887.0, 1091722.0), - (22141.0, 4720.0, 4365.0, 5945.0, -9809656.0, 1061181.0), - (14000.0, 5192.0, 6753.0, 9190.0, -4002417.0, 739161.0), - (4127.0, 15789.0, 6753.0, 9190.0, 9459261.0, 711490.0), -]; - -pub(super) fn cloud(name: &str, w: f64, h: f64, a0: f64, a1: f64) -> Geometry { - // Drawn in the path's own 43200-unit square, then stretched to the box (as DrawingML lays out - // a path with its own w and h), so the arcs keep their shape's proportions at any aspect. - let to_box = kurbo::Affine::scale_non_uniform(w / 43200.0, h / 43200.0); - let deg = |v: f64| v / 60000.0; - let mut b = Pb::new(); - b.m(3900.0, 14370.0); - for (wr, hr, st, sw) in CLOUD_ARCS { - b.arc_spec(wr, hr, deg(st), deg(sw)); - } - b.z(); - let mut creases = Pb::new(); - for (x, y, wr, hr, st, sw) in CLOUD_CREASES { - creases.m(x, y).arc_spec(wr, hr, deg(st), deg(sw)); - } - let mut outline = b.take(); - outline.apply_affine(to_box); - let mut paths = vec![fill(outline)]; - if name == "cloud" { - let mut c = creases.take(); - c.apply_affine(to_box); - paths.push(stroke_only(c)); - } - let text_rect = Rect::new(w * 2977.0 / 21600.0, h * 3262.0 / 21600.0, w * 17087.0 / 21600.0, h * 17337.0 / 21600.0); - let mut handles = vec![]; - if name == "cloudCallout" { - let tip = Point::new(w / 2.0 + w * a0 / 1e5, h / 2.0 + h * a1 / 1e5); - let c = Point::new(w / 2.0, h / 2.0); - let mut bubbles = Pb::new(); - for (k, r) in [(0.55, 0.06), (0.75, 0.045), (0.95, 0.03)] { - let p = c + (tip - c) * k; - if !(p.x > w * 0.1 && p.x < w * 0.9 && p.y > h * 0.1 && p.y < h * 0.9) || k > 0.9 { - bubbles.ellipse(p.x, p.y, w * r, h * r); - } - } - paths.push(fill(bubbles.take())); - handles.push(tip_handle(w, h, tip)); - } - Geometry { paths, text_rect, handles, sites: mid_sites(w, h) } -} - -/// The equation shapes, by ECMA-376's formulas (checked against PowerPoint's outlines at several -/// sizes and adjust values). Their bars span 73.49% of the width; the plus and multiply bars are -/// `adj1` of the shorter side thick, the others' `adj1` of the height. -pub(super) fn math(name: &str, w: f64, h: f64, a0: f64, a1: f64, a2: f64) -> Geometry { - let pin = |lo: f64, v: f64, hi: f64| v.max(lo).min(hi.max(lo)); - let ss = w.min(h); - let (hc, vc) = (w / 2.0, h / 2.0); - let dx1 = w * 73490.0 / 200000.0; - let (x1, x2) = (hc - dx1, hc + dx1); - let mut b = Pb::new(); - let text = match name { - "mathPlus" => { - let a = pin(0.0, a0, 73490.0); - let dy1 = h * 73490.0 / 200000.0; - let dx2 = ss * a / 200000.0; - let (y1, y2, y3, y4) = (vc - dy1, vc - dx2, vc + dx2, vc + dy1); - let (xa, xb) = (hc - dx2, hc + dx2); - b.poly(&[(x1, y2), (xa, y2), (xa, y1), (xb, y1), (xb, y2), (x2, y2), (x2, y3), (xb, y3), (xb, y4), (xa, y4), (xa, y3), (x1, y3)]); - Rect::new(x1, y2, x2, y3) - } - "mathMinus" => { - let dy1 = h * pin(0.0, a0, 100000.0) / 200000.0; - b.poly(&[(x1, vc - dy1), (x2, vc - dy1), (x2, vc + dy1), (x1, vc + dy1)]); - Rect::new(x1, vc - dy1, x2, vc + dy1) - } - "mathEqual" => { - let a = pin(0.0, a0, 36745.0); - let g = pin(0.0, a1, 100000.0 - 2.0 * a); - let (dy1, dy2) = (h * a / 100000.0, h * g / 200000.0); - let (y2, y3) = (vc - dy2, vc + dy2); - let (y1, y4) = (y2 - dy1, y3 + dy1); - b.poly(&[(x1, y1), (x2, y1), (x2, y2), (x1, y2)]); - b.poly(&[(x1, y3), (x2, y3), (x2, y4), (x1, y4)]); - Rect::new(x1, y1, x2, y4) - } - "mathNotEqual" => { - let a = pin(0.0, a0, 50000.0); - let cr_ang = pin(4200000.0, a1, 6600000.0); - let g = pin(0.0, a2, 100000.0 - 2.0 * a); - let (dy1, dy2) = (h * a / 100000.0, h * g / 200000.0); - let hd2 = (h / 2.0).max(1e-9); - let (y2, y3) = (vc - dy2, vc + dy2); - let (y1, y4) = (y2 - dy1, y3 + dy1); - let cadj2 = cr_ang - 5400000.0; - let xadj2 = hd2 * (cadj2 / 60000.0).to_radians().tan(); - let len = xadj2.hypot(hd2); - let bhw = len * dy1 / hd2; - let x7 = hc + xadj2 - bhw / 2.0; - let at = |y: f64| x7 - xadj2 * y / hd2; - let (x6, x5, x4, x3) = (at(y1), at(y2), at(y3), at(y4)); - let rx7 = x7 + bhw; - let dx7 = dy1 * hd2 / len; - let dy3 = dy1 * xadj2 / len; - let (rx, lx, ry, ly) = if cadj2 > 0.0 { (x7 + dx7, x7, dy3, 0.0) } else { (rx7, rx7 - dx7, 0.0, -dy3) }; - b.poly(&[ - (x1, y1), - (x6, y1), - (lx, ly), - (rx, ry), - (x6 + bhw, y1), - (x2, y1), - (x2, y2), - (x5 + bhw, y2), - (x4 + bhw, y3), - (x2, y3), - (x2, y4), - (x3 + bhw, y4), - (w - lx, h - ly), - (w - rx, h - ry), - (x3, y4), - (x1, y4), - (x1, y3), - (x4, y3), - (x5, y2), - (x1, y2), - ]); - Rect::new(x1, y1, x2, y4) - } - "mathDivide" => { - let a = pin(1000.0, a0, 36745.0); - let max3 = ((73490.0 - a) / 4.0).min(36745.0 * w / h.max(1e-9)); - let r3 = pin(1000.0, a2, max3); - let g = pin(0.0, a1, 73490.0 - 4.0 * r3 - a); - let dy1 = h * a / 200000.0; - let yg = h * g / 100000.0; - let rad = h * r3 / 100000.0; - let (y3, y4) = (vc - dy1, vc + dy1); - let y2 = y3 - (yg + rad); - let y1 = y2 - rad; - b.ellipse(hc, y1 + rad, rad, rad); - b.ellipse(hc, h - y1 - rad, rad, rad); - b.poly(&[(x1, y3), (x2, y3), (x2, y4), (x1, y4)]); - Rect::new(x1, y3, x2, y4) - } - _ => { - // mathMultiply: an X whose arms run along the box's diagonals. - let th = ss * pin(0.0, a0, 51965.0) / 100000.0; - let ang = h.atan2(w); - let (sa, ca, ta) = (ang.sin(), ang.cos(), ang.tan().max(1e-9)); - let lm = w.hypot(h) * (1.0 - 51965.0 / 100000.0); - let (xm, ym) = (ca * lm / 2.0, sa * lm / 2.0); - let (dxam, dyam) = (sa * th / 2.0, ca * th / 2.0); - let (xa, ya, xb, yb) = (xm - dxam, ym + dyam, xm + dxam, ym - dyam); - let yc = (hc - xb) * ta + yb; - let (xd, xe) = (w - xb, w - xa); - let xfe = (vc - ya) / ta; - let (xf, xl) = (xe - xfe, xa + xfe); - let (yg, yh, yi) = (h - ya, h - yb, h - yc); - b.poly(&[(xa, ya), (xb, yb), (hc, yc), (xd, yb), (xe, ya), (xf, vc), (xe, yg), (xd, yh), (hc, yi), (xb, yh), (xa, yg), (xl, vc)]); - Rect::new(xa, yb, xe, yh) - } - }; - Geometry { paths: vec![fill(b.take())], text_rect: text, handles: vec![], sites: mid_sites(w, h) } -} - -pub(super) fn ribbon(up: bool, w: f64, h: f64, a0: f64, a1: f64) -> Geometry { - let fold = h * a0.clamp(0.0, 33333.0) / 1e5; - let cw = w * a1.clamp(25000.0, 75000.0) / 1e5; // centre band width - let x0 = (w - cw) / 2.0; - let x1 = w - x0; - let ear = w / 8.0; - let (top, bot) = (0.0, h); - let mut b = Pb::new(); - let mut shade_p = Pb::new(); - if up { - // centre band sits high; ends hang low. - b.poly(&[(x0, top), (x1, top), (x1, bot - fold), (x0, bot - fold)]); - let mut ends = Pb::new(); - ends.poly(&[(0.0, fold), (x0 + ear * 0.5, fold), (x0 + ear * 0.5, bot), (0.0, bot), (ear, (fold + bot) / 2.0)]); - ends.poly(&[(w, fold), (x1 - ear * 0.5, fold), (x1 - ear * 0.5, bot), (w, bot), (w - ear, (fold + bot) / 2.0)]); - shade_p.poly(&[(x0, bot - fold), (x0 + ear * 0.5, bot - fold), (x0 + ear * 0.5, bot)]); - shade_p.poly(&[(x1, bot - fold), (x1 - ear * 0.5, bot - fold), (x1 - ear * 0.5, bot)]); - let text = Rect::new(x0, top, x1, bot - fold); - return Geometry { - paths: vec![fill(ends.take()), shade(shade_p.take(), FillMode::DarkenLess), fill(b.take())], - text_rect: text, - handles: vec![], - sites: mid_sites(w, h), - }; - } - b.poly(&[(x0, top + fold), (x1, top + fold), (x1, bot), (x0, bot)]); - let mut ends = Pb::new(); - ends.poly(&[(0.0, top), (x0 + ear * 0.5, top), (x0 + ear * 0.5, bot - fold), (0.0, bot - fold), (ear, (bot - fold) / 2.0)]); - ends.poly(&[(w, top), (x1 - ear * 0.5, top), (x1 - ear * 0.5, bot - fold), (w, bot - fold), (w - ear, (bot - fold) / 2.0)]); - shade_p.poly(&[(x0, top + fold), (x0 + ear * 0.5, top + fold), (x0 + ear * 0.5, top)]); - shade_p.poly(&[(x1, top + fold), (x1 - ear * 0.5, top + fold), (x1 - ear * 0.5, top)]); - let text = Rect::new(x0, top + fold, x1, bot); - Geometry { - paths: vec![fill(ends.take()), shade(shade_p.take(), FillMode::DarkenLess), fill(b.take())], - text_rect: text, - handles: vec![], - sites: mid_sites(w, h), - } -} - -pub(super) fn scroll(vertical: bool, w: f64, h: f64, a0: f64) -> Geometry { - let ss = w.min(h); - let r = ss * a0.clamp(0.0, 25000.0) / 1e5 / 2.0; - let mut b = Pb::new(); - let mut curl = Pb::new(); - if vertical { - b.poly(&[(r, r * 2.0), (w - r, r * 2.0), (w - r, h - r), (r, h - r)]); - b.ellipse(w / 2.0, r, w / 2.0 - r * 0.0, r); - curl.ellipse(r, h - r, r, r); - curl.ellipse(w - r * 2.0, r, r * 0.5, r * 0.5); - let text = Rect::new(r, r * 2.0, w - r, h - r); - return Geometry { - paths: vec![fill(b.take()), shade(curl.take(), FillMode::DarkenLess)], - text_rect: text, - handles: vec![], - sites: mid_sites(w, h), - }; - } - b.poly(&[(r * 2.0, r), (w - r, r), (w - r, h - r), (r * 2.0, h - r)]); - b.ellipse(r, h / 2.0, r, h / 2.0); - curl.ellipse(w - r, r, r, r); - curl.ellipse(r, h - r * 2.0, r * 0.5, r * 0.5); - let text = Rect::new(r * 2.0, r, w - r, h - r); - Geometry { paths: vec![fill(b.take()), shade(curl.take(), FillMode::DarkenLess)], text_rect: text, handles: vec![], sites: mid_sites(w, h) } -} - -pub(super) fn action_button(name: &str, w: f64, h: f64) -> Geometry { - let body = corner_rect(w, h, [Corner::Square; 4]); - let ss = w.min(h); - let (cx, cy) = (w / 2.0, h / 2.0); - let s = ss * 0.3; - let mut g = Pb::new(); - match name { - "actionButtonBackPrevious" => { - g.poly(&[(cx + s, cy - s), (cx + s, cy + s), (cx - s, cy)]); - } - "actionButtonForwardNext" => { - g.poly(&[(cx - s, cy - s), (cx - s, cy + s), (cx + s, cy)]); - } - "actionButtonBeginning" => { - g.poly(&[(cx + s, cy - s), (cx + s, cy + s), (cx - s * 0.6, cy)]); - g.poly(&[(cx - s, cy - s), (cx - s * 0.7, cy - s), (cx - s * 0.7, cy + s), (cx - s, cy + s)]); - } - "actionButtonEnd" => { - g.poly(&[(cx - s, cy - s), (cx - s, cy + s), (cx + s * 0.6, cy)]); - g.poly(&[(cx + s * 0.7, cy - s), (cx + s, cy - s), (cx + s, cy + s), (cx + s * 0.7, cy + s)]); - } - "actionButtonHome" => { - g.poly(&[ - (cx, cy - s), - (cx + s, cy), - (cx + s * 0.7, cy), - (cx + s * 0.7, cy + s), - (cx - s * 0.7, cy + s), - (cx - s * 0.7, cy), - (cx - s, cy), - ]); - } - "actionButtonInformation" | "actionButtonHelp" => { - g.ellipse(cx, cy, s, s); - } - "actionButtonReturn" => { - g.m(cx + s, cy - s * 0.6).l(cx + s, cy + s * 0.2).q(cx + s, cy + s * 0.8, cx + s * 0.4, cy + s * 0.8).l(cx - s * 0.5, cy + s * 0.8); - g.l(cx - s * 0.5, cy + s * 0.4) - .l(cx - s, cy + s * 0.9) - .l(cx - s * 0.5, cy + s * 1.4) - .l(cx - s * 0.5, cy + s) - .l(cx + s * 0.6, cy + s) - .l(cx + s * 0.6, cy - s * 0.6) - .z(); - } - "actionButtonMovie" => { - g.poly(&[(cx - s, cy - s * 0.6), (cx + s * 0.4, cy - s * 0.6), (cx + s * 0.4, cy + s * 0.6), (cx - s, cy + s * 0.6)]); - g.poly(&[(cx + s * 0.4, cy), (cx + s, cy - s * 0.5), (cx + s, cy + s * 0.5)]); - } - "actionButtonDocument" => { - g.poly(&[(cx - s * 0.7, cy - s), (cx + s * 0.3, cy - s), (cx + s * 0.7, cy - s * 0.6), (cx + s * 0.7, cy + s), (cx - s * 0.7, cy + s)]); - } - "actionButtonSound" => { - g.poly(&[ - (cx - s, cy - s * 0.35), - (cx - s * 0.5, cy - s * 0.35), - (cx, cy - s), - (cx, cy + s), - (cx - s * 0.5, cy + s * 0.35), - (cx - s, cy + s * 0.35), - ]); - } - _ => {} - } - Geometry { - paths: vec![fill(body), shade(g.take(), FillMode::DarkenLess)], - text_rect: Rect::new(0.0, 0.0, w, h), - handles: vec![], - sites: mid_sites(w, h), - } -} diff --git a/crates/geom/src/preset/tests.rs b/crates/geom/src/preset/tests.rs deleted file mode 100644 index dc18dcdb5..000000000 --- a/crates/geom/src/preset/tests.rs +++ /dev/null @@ -1,420 +0,0 @@ -use super::*; -use kurbo::Shape; - -#[test] -fn every_catalog_preset_builds_within_bounds() { - for p in CATALOG { - for (w, h) in [(200.0, 100.0), (100.0, 200.0), (50.0, 50.0), (0.0, 0.0), (1.0, 300.0)] { - let g = build(p.name, w, h, &[]).unwrap_or_else(|| panic!("{} did not build", p.name)); - assert!(!g.paths.is_empty(), "{} has no paths", p.name); - for s in &g.paths { - let bb = s.path.bounding_box(); - if w > 0.0 && h > 0.0 && !p.name.contains("Connector") && !p.name.contains("allout") { - let tol = w.max(h) * 0.35 + 1.0; - assert!(bb.x0 >= -tol && bb.y0 >= -tol && bb.x1 <= w + tol && bb.y1 <= h + tol, "{} {w}x{h} out of bounds: {bb:?}", p.name); - } - assert!(bb.x0.is_finite() && bb.y1.is_finite(), "{} produced non-finite geometry", p.name); - } - assert!(g.text_rect.x0.is_finite() && g.text_rect.y1.is_finite(), "{}", p.name); - } - } -} - -#[test] -fn hostile_adjust_values_never_panic() { - for p in CATALOG { - for v in [f64::NAN, f64::INFINITY, -1e12, 1e12, -1.0, 0.0] { - let adj = vec![v; 6]; - let g = build(p.name, 120.0, 80.0, &adj); - assert!(g.is_some(), "{}", p.name); - } - } - assert!(build("rect", f64::NAN, 10.0, &[]).is_none()); - assert!(build("noSuchShape", 10.0, 10.0, &[]).is_none()); -} - -#[test] -fn catalog_names_are_unique() { - let mut names: Vec<&str> = CATALOG.iter().map(|p| p.name).collect(); - names.sort_unstable(); - let n = names.len(); - names.dedup(); - assert_eq!(n, names.len()); - assert!(n >= 140, "catalog has {n} presets"); -} - -#[test] -fn round_rect_handle_maps_back() { - let g = build("roundRect", 200.0, 100.0, &[16667.0]).unwrap(); - let h = g.handles.first().unwrap(); - assert!((h.value_at(h.pos) - 16667.0).abs() <= 1.0); - assert_eq!(h.value_at(Point::new(-50.0, 0.0)), 0.0); - assert_eq!(h.value_at(Point::new(500.0, 0.0)), 50000.0); -} - -#[test] -fn partial_circle_angle_handles_map_back() { - // Start 0° sits at the right of the ellipse, end 270° at its top. - for name in ["pie", "chord", "arc"] { - let g = build(name, 200.0, 100.0, &[0.0, 16200000.0]).unwrap(); - assert_eq!(g.handles.iter().map(|h| h.index).collect::>(), vec![0, 1], "{name}"); - let (s, e) = (&g.handles[0], &g.handles[1]); - assert!((s.pos - Point::new(200.0, 50.0)).hypot() < 1e-6, "{name} {:?}", s.pos); - assert!((e.pos - Point::new(100.0, 0.0)).hypot() < 1e-6, "{name} {:?}", e.pos); - assert_eq!(s.value_at(s.pos), 0.0, "{name}"); - assert_eq!(e.value_at(e.pos), 16200000.0, "{name}"); - // Dragging to the bottom of the ellipse gives 90°. - assert_eq!(s.value_at(Point::new(100.0, 100.0)), 5400000.0, "{name}"); - // Off-axis angles on a non-square ellipse: the visual 45° ray meets the 200×100 - // ellipse at offset (√2000, √2000) from the centre. - let k = 2000f64.sqrt(); - let g = build(name, 200.0, 100.0, &[2700000.0, 8100000.0]).unwrap(); - let (s, e) = (&g.handles[0], &g.handles[1]); - assert!((s.pos - Point::new(100.0 + k, 50.0 + k)).hypot() < 1e-6, "{name} {:?}", s.pos); - assert!((e.pos - Point::new(100.0 - k, 50.0 + k)).hypot() < 1e-6, "{name} {:?}", e.pos); - for (deg, h) in [(45.0, s), (135.0, e)] { - let on = ((h.pos.x - 100.0) / 100.0).powi(2) + ((h.pos.y - 50.0) / 50.0).powi(2); - assert!((on - 1.0).abs() < 1e-9, "{name} {deg}° off ellipse: {:?}", h.pos); - assert!((h.value_at(h.pos) - deg * 60000.0).abs() <= 1.0, "{name} {deg}°: {}", h.value_at(h.pos)); - } - } - for deg in [45.0, 135.0, 200.0, 315.0] { - let g = build("blockArc", 200.0, 100.0, &[deg * 60000.0, 0.0, 25000.0]).unwrap(); - let start = g.handles.iter().find(|h| h.index == 0).unwrap(); - // Thickness 25 → the handle runs on the 87.5×37.5 mid-ring ellipse. - let on = ((start.pos.x - 100.0) / 87.5).powi(2) + ((start.pos.y - 50.0) / 37.5).powi(2); - assert!((on - 1.0).abs() < 1e-9, "blockArc {deg}° off ring: {:?}", start.pos); - let d = start.pos - Point::new(100.0, 50.0); - assert!((d.y.atan2(d.x).to_degrees().rem_euclid(360.0) - deg).abs() < 1e-6, "blockArc {deg}°: {:?}", start.pos); - assert!((start.value_at(start.pos) - deg * 60000.0).abs() <= 1.0, "blockArc {deg}°"); - } - let g = build("blockArc", 200.0, 100.0, &[10800000.0, 0.0, 25000.0]).unwrap(); - let start = g.handles.iter().find(|h| h.index == 0).unwrap(); - assert_eq!(start.value_at(start.pos), 10800000.0); - let thick = g.handles.iter().find(|h| h.index == 2).unwrap(); - assert!((thick.value_at(thick.pos) - 25000.0).abs() <= 1.0); -} - -#[test] -fn presets_with_adjust_values_expose_handles() { - // Presets whose adjust values have no handle of their own yet. - const NO_HANDLES: &[&str] = &[ - "curvedConnector3", - "snip2SameRect", - "snip2DiagRect", - "snipRoundRect", - "round1Rect", - "round2SameRect", - "round2DiagRect", - "teardrop", - "halfFrame", - "corner", - "diagStripe", - "foldedCorner", - "smileyFace", - "moon", - "gear6", - "gear9", - "bracketPair", - "bracePair", - "leftBracket", - "rightBracket", - "leftBrace", - "rightBrace", - "leftRightArrow", - "upDownArrow", - "quadArrow", - "leftRightUpArrow", - "bentArrow", - "uturnArrow", - "curvedRightArrow", - "curvedLeftArrow", - "curvedUpArrow", - "curvedDownArrow", - "leftUpArrow", - "bentUpArrow", - "circularArrow", - "leftCircularArrow", - "leftRightCircularArrow", - "swooshArrow", - "rightArrowCallout", - "downArrowCallout", - "leftArrowCallout", - "upArrowCallout", - "leftRightArrowCallout", - "upDownArrowCallout", - "quadArrowCallout", - "mathPlus", - "mathMinus", - "mathMultiply", - "mathDivide", - "mathEqual", - "mathNotEqual", - "ribbon2", - "ribbon", - "ellipseRibbon2", - "ellipseRibbon", - "leftRightRibbon", - "verticalScroll", - "horizontalScroll", - "wave", - "doubleWave", - "borderCallout1", - "borderCallout2", - "borderCallout3", - "accentCallout1", - "accentCallout2", - "accentCallout3", - "callout1", - "callout2", - "callout3", - "accentBorderCallout1", - "accentBorderCallout2", - "accentBorderCallout3", - ]; - for p in CATALOG { - if p.defaults.is_empty() || NO_HANDLES.contains(&p.name) { - continue; - } - let g = build(p.name, 200.0, 100.0, &[]).unwrap(); - assert!(!g.handles.is_empty(), "{} has adjust values but no handles", p.name); - } -} - -#[test] -fn rect_area_and_ellipse_area() { - let g = build("rect", 100.0, 50.0, &[]).unwrap(); - assert!((g.paths[0].path.area().abs() - 5000.0).abs() < 1e-6); - let e = build("ellipse", 100.0, 50.0, &[]).unwrap(); - let expect = std::f64::consts::PI * 50.0 * 25.0; - assert!((e.paths[0].path.area().abs() - expect).abs() / expect < 0.01); -} - -#[test] -fn lines_are_open() { - assert!(build("line", 10.0, 10.0, &[]).unwrap().is_open()); - assert!(!build("rect", 10.0, 10.0, &[]).unwrap().is_open()); -} - -fn on_path(g: &Geometry, p: Point, tol: f64) -> bool { - use kurbo::ParamCurveNearest; - g.paths.iter().any(|sp| sp.path.segments().any(|seg| seg.nearest(p, 1e-6).distance_sq <= tol * tol)) -} - -#[test] -fn fixed_shapes_follow_the_standards_coordinates() { - // Points of ECMA-376's definitions (in 21600ths), checked on a 216 × 108 box. - let (w, h) = (216.0, 108.0); - let at = |x: f64, y: f64| Point::new(w * x / 21600.0, h * y / 21600.0); - let g = build("lightningBolt", w, h, &[]).unwrap(); - for (x, y) in [(8472.0, 0.0), (16577.0, 12007.0), (21600.0, 21600.0), (0.0, 3890.0)] { - assert!(on_path(&g, at(x, y), 1e-6), "lightningBolt ({x}, {y})"); - } - let g = build("irregularSeal1", w, h, &[]).unwrap(); - assert!(on_path(&g, at(14522.0, 0.0), 1e-6) && on_path(&g, at(8485.0, 21600.0), 1e-6)); - let g = build("irregularSeal2", w, h, &[]).unwrap(); - assert!(on_path(&g, at(14790.0, 0.0), 1e-6) && on_path(&g, at(4917.0, 21600.0), 1e-6)); - // The heart's point is the middle of the bottom edge, its notch a quarter down. - let g = build("heart", w, h, &[]).unwrap(); - assert!(on_path(&g, Point::new(w / 2.0, h), 1e-6) && on_path(&g, Point::new(w / 2.0, h / 4.0), 1e-6)); - let g = build("flowChartDocument", w, h, &[]).unwrap(); - assert!(on_path(&g, at(21600.0, 17322.0), 1e-6) && on_path(&g, at(0.0, 20172.0), 1e-6)); - // Punched tape: the top edge dips to a fifth of the height a quarter of the way along. - let g = build("flowChartPunchedTape", w, h, &[]).unwrap(); - assert!(on_path(&g, Point::new(w / 4.0, h / 5.0), 1e-3) && on_path(&g, Point::new(w * 0.75, 0.0), 1e-3)); - let g = build("flowChartMultidocument", w, h, &[]).unwrap(); - assert!(on_path(&g, at(2972.0, 0.0), 1e-6) && on_path(&g, at(18595.0, 18022.0), 1e-6)); -} - -#[test] -fn notched_arrow_notch_parallels_the_head() { - // presetShapeDefinitions: the notch's point is at x1 = dy1 · dx2 / hd2, so its edges run - // parallel to the head's (25 on a 200 × 100 arrow at the default adjusts). - for (w, h, adj, x1) in [(200.0, 100.0, [50000.0, 50000.0], 25.0), (300.0, 120.0, [80000.0, 30000.0], 28.8)] { - let g = build("notchedRightArrow", w, h, &adj).unwrap(); - let notch = g.paths[0].path.elements().iter().find_map(|e| match e { - kurbo::PathEl::MoveTo(p) | kurbo::PathEl::LineTo(p) if (p.y - h / 2.0).abs() < 1e-9 && p.x < w / 2.0 => Some(*p), - _ => None, - }); - assert!(notch.is_some_and(|p| (p.x - x1).abs() < 1e-6), "{w}x{h} {adj:?}: notch at {notch:?}, want x = {x1}"); - } -} - -#[test] -fn equation_shapes_match_powerpoints_outlines() { - // Corners read off PowerPoint's own outlines of the presets at their default adjusts. - let g = build("mathMultiply", 216.0, 216.0, &[]).unwrap(); - for (x, y) in [(0.32333, 0.15702), (0.5, 0.33369), (0.84298, 0.32333), (0.66631, 0.5), (0.33369, 0.5)] { - assert!(on_path(&g, Point::new(216.0 * x, 216.0 * y), 0.01), "multiply ({x}, {y})"); - } - let g = build("mathEqual", 300.0, 120.0, &[]).unwrap(); - for (x, y) in [(0.13255, 0.5588), (0.86745, 0.794), (0.13255, 0.206), (0.86745, 0.4412)] { - assert!(on_path(&g, Point::new(300.0 * x, 120.0 * y), 0.01), "equal ({x}, {y})"); - } - let g = build("mathPlus", 216.0, 216.0, &[]).unwrap(); - assert!(on_path(&g, Point::new(216.0 * 0.3824, 216.0 * 0.13255), 0.01) && on_path(&g, Point::new(216.0 * 0.86745, 216.0 * 0.6176), 0.01)); - // A tall "not equal": its slash, leaning at the default 110° from top to bottom, reaches - // past the box's sides exactly as far as PowerPoint's (-22.242 to 122.242). - let g = build("mathNotEqual", 100.0, 260.0, &[]).unwrap(); - use kurbo::Shape as _; - let bb = g.paths[0].path.bounding_box(); - assert!((bb.x0 + 22.242).abs() < 0.01 && (bb.x1 - 122.242).abs() < 0.01 && bb.y0.abs() < 1e-6 && (bb.y1 - 260.0).abs() < 1e-6, "{bb:?}"); -} - -#[test] -fn sun_and_waves_match_powerpoints_outlines() { - // Points read off PowerPoint's outlines of the presets (216 pt square, default adjusts). - let k = 216.0; - let g = build("sun", k, k, &[]).unwrap(); - for (x, y) in [(0.85352, 0.14644), (0.76161, 0.33987), (0.66013, 0.23839), (0.42825, 0.79823), (0.20177, 0.57175), (0.75, 0.5), (0.5, 0.25)] { - assert!(on_path(&g, Point::new(k * x, k * y), 0.02), "sun ({x}, {y})"); - } - let g = build("wave", k, k, &[]).unwrap(); - for (x, y) in [(0.21875, 0.00484), (1.0, 0.125), (1.0, 0.875), (0.0, 0.875)] { - assert!(on_path(&g, Point::new(k * x, k * y), 0.05), "wave ({x}, {y})"); - } - // Shifted: a wave of 300 × 120 with adj (20000, 8000) starts 0.16 of the width in. - let g = build("wave", 300.0, 120.0, &[20000.0, 8000.0]).unwrap(); - for (x, y) in [(0.18375, 0.00774), (0.84, 0.2), (1.0, 0.8), (0.16, 0.8)] { - assert!(on_path(&g, Point::new(300.0 * x, 120.0 * y), 0.05), "shifted wave ({x}, {y})"); - } -} - -#[test] -fn star_text_rectangles_follow_the_standard() { - // star5 at its default 19098 in a 144 pt square: the inner pentagon, about 0.38 of the - // width (PowerPoint wraps "Shape 3" at 18 pt there), from y ≈ 55 to ≈ 110. - let g = build("star5", 144.0, 144.0, &[]).unwrap(); - let t = g.text_rect; - assert!((t.width() - 55.0).abs() < 1.0, "{t:?}"); - assert!((t.y0 - 55.0).abs() < 1.0 && (t.y1 - 110.0).abs() < 1.0, "{t:?}"); - // star4 at 12500: the square through its inner points' 45° corners. - let g = build("star4", 144.0, 144.0, &[]).unwrap(); - assert!((g.text_rect.width() - 72.0 * 0.25 * 2f64.sqrt()).abs() < 0.5, "{:?}", g.text_rect); -} - -#[test] -fn stars_are_stretched_like_the_standards() { - // star5 in a 216 pt square: top point at the top middle, side points at 18 degrees on an - // ellipse 5.146% wider and 10.557% taller, centred 10.557% below the middle; its bottom - // points reach the box's bottom edge. - let k = 216.0; - let g = build("star5", k, k, &[]).unwrap(); - let (rx, ry, cy) = (k / 2.0 * 1.05146, k / 2.0 * 1.10557, k / 2.0 * 1.10557); - let a = 18f64.to_radians(); - assert!(on_path(&g, Point::new(k / 2.0, 0.0), 1e-6)); - assert!(on_path(&g, Point::new(k / 2.0 + rx * a.cos(), cy - ry * a.sin()), 1e-6)); - use kurbo::Shape as _; - let bb = g.paths[0].path.bounding_box(); - assert!((bb.x0).abs() < 0.5 && (bb.x1 - k).abs() < 0.5 && (bb.y1 - k).abs() < 0.5, "{bb:?}"); - // star6 is 15.47% wider than its box's half-width allows (its points touch the sides). - let g = build("star6", k, k, &[]).unwrap(); - let bb = g.paths[0].path.bounding_box(); - assert!((bb.x0).abs() < 0.5 && (bb.x1 - k).abs() < 0.5, "{bb:?}"); -} - -#[test] -fn moon_disk_and_drum_match_powerpoints_outlines() { - let k = 216.0; - // Moon, default: the inner edge runs through (0.5, 0.5) and (0.625, 0.2266) of the box. - let g = build("moon", k, k, &[]).unwrap(); - for (x, y) in [(0.5, 0.5), (0.626, 0.2266), (0.0, 0.5), (1.0, 0.0)] { - assert!(on_path(&g, Point::new(k * x, k * y), 0.5), "moon ({x}, {y})"); - } - // 300 × 120 at 30%: its inner edge reaches 30% of the width in. - let g = build("moon", 300.0, 120.0, &[30000.0]).unwrap(); - assert!(on_path(&g, Point::new(90.0, 60.0), 0.5)); - // Magnetic disk ends are ellipses h/6 high, drum ends w/6 across. - let g = build("flowChartMagneticDisk", k, k, &[]).unwrap(); - assert!(on_path(&g, Point::new(k, k / 6.0), 0.01) && on_path(&g, Point::new(k / 2.0, k / 3.0), 0.5)); - let g = build("flowChartMagneticDrum", k, k, &[]).unwrap(); - assert!(on_path(&g, Point::new(k / 6.0, 0.0), 0.01) && on_path(&g, Point::new(0.0, k / 2.0), 0.01)); -} - -#[test] -fn the_cloud_fills_its_box_at_any_aspect_and_has_creases() { - use kurbo::Shape as _; - for (w, h) in [(200.0, 200.0), (300.0, 100.0), (60.0, 180.0)] { - let g = build("cloud", w, h, &[]).unwrap(); - let bb = g.paths[0].path.bounding_box(); - assert!(bb.x0.abs() < w * 0.02 && (bb.x1 - w).abs() < w * 0.02, "{w}×{h}: {bb:?}"); - assert!(bb.y0.abs() < h * 0.02 && (bb.y1 - h).abs() < h * 0.02, "{w}×{h}: {bb:?}"); - assert_eq!(g.paths.len(), 2, "outline and creases"); - assert!(g.paths[1].stroke && g.paths[1].fill == FillMode::None); - } -} - -#[test] -fn spec_arcs_take_angles_as_directions_from_the_centre() { - // A DrawingML arc of a 2:1 ellipse from 45° to 90°: 45° is the direction (1, 1) from the - // centre, which on that ellipse is the point (r/√5)·(2, 1)… scaled so it lies on it. - let mut b = Pb::new(); - b.m(0.0, 0.0).arc_spec(200.0, 100.0, 45.0, 45.0); - let p = b.take(); - let end = p.elements().last().and_then(|e| match e { - kurbo::PathEl::CurveTo(_, _, q) => Some(*q), - _ => None, - }); - // Centre: the start sits at direction 45°, i.e. at (k, k) from it with (k/200)² + (k/100)² = 1. - let k = 1.0 / (1.0f64 / 40000.0 + 1.0 / 10000.0).sqrt(); - let c = Point::new(-k, -k); - let q = end.unwrap(); - assert!((q.x - c.x).abs() < 1e-6 && (q.y - (c.y + 100.0)).abs() < 1e-6, "{q:?} vs centre {c:?}"); -} - -#[test] -fn brackets_and_braces_fill_out_to_their_straight_side() { - // PowerPoint fills a bracket or brace (when it has a fill) between its curve and the - // straight side it opens to; only the curve is outlined. - for name in ["leftBracket", "rightBracket", "leftBrace", "rightBrace"] { - let g = build(name, 40.0, 100.0, &[]).unwrap(); - let filled: Vec<_> = g.paths.iter().filter(|p| p.fill != FillMode::None).collect(); - assert_eq!(filled.len(), 1, "{name}"); - assert!(!filled[0].stroke, "{name}: the filled area is not outlined"); - let area = filled[0].path.area().abs(); - assert!(area > 40.0 * 100.0 * 0.4 && area < 40.0 * 100.0, "{name}: {area}"); - assert!(g.paths.iter().any(|p| p.stroke && p.fill == FillMode::None), "{name}: the curve is outlined"); - } -} - -/// The end points of a path's move/line elements, in order. -fn vertices(p: &BezPath) -> Vec { - p.elements() - .iter() - .filter_map(|e| match e { - kurbo::PathEl::MoveTo(q) | kurbo::PathEl::LineTo(q) => Some(*q), - _ => None, - }) - .collect() -} - -#[test] -fn wedge_callout_mirrors_with_its_tip() { - // A tip below and right of the centre draws the mirror image of the same tip on the left; - // the same for a tip right of the centre, above or below it. presetShapeDefinitions puts - // the wedge's base at 2..5 twelfths of the edge on the near side of the centre and at - // 7..10 twelfths on the far side. - let (w, h) = (240.0, 120.0); - // Sorted and deduplicated: the outline closes on the corner it starts from, which the - // mirror moves to the opposite corner. - let sorted = |mut v: Vec| { - v.sort_by(|a, b| a.x.total_cmp(&b.x).then(a.y.total_cmp(&b.y))); - v.dedup_by(|a, b| (*a - *b).hypot() < 1e-9); - v - }; - for (right, left, flip_x) in [([10000.0, 80000.0], [-10000.0, 80000.0], true), ([80000.0, 10000.0], [80000.0, -10000.0], false)] { - let a = vertices(&build("wedgeRectCallout", w, h, &right).unwrap().paths[0].path); - let b = vertices(&build("wedgeRectCallout", w, h, &left).unwrap().paths[0].path); - let b: Vec = b.iter().map(|p| if flip_x { Point::new(w - p.x, p.y) } else { Point::new(p.x, h - p.y) }).collect(); - let (a, b) = (sorted(a), sorted(b)); - assert_eq!(a.len(), b.len(), "{right:?}: {a:?} vs mirrored {left:?}: {b:?}"); - for (p, q) in a.iter().zip(&b) { - assert!((*p - *q).hypot() < 1e-6, "{right:?}: {a:?}\n is not the mirror of {left:?}: {b:?}"); - } - } - // The bottom wedge of a tip right of the centre leaves the edge at 7/12 and 10/12 of the width. - let a = vertices(&build("wedgeRectCallout", w, h, &[10000.0, 80000.0]).unwrap().paths[0].path); - for x in [w * 7.0 / 12.0, w * 10.0 / 12.0] { - assert!(a.iter().any(|p| (p.x - x).abs() < 1e-6 && (p.y - h).abs() < 1e-6), "no wedge corner at ({x}, {h}): {a:?}"); - } -} diff --git a/crates/geom/src/warp.rs b/crates/geom/src/warp.rs deleted file mode 100644 index 81376d7d7..000000000 --- a/crates/geom/src/warp.rs +++ /dev/null @@ -1,1023 +0,0 @@ -//! WordArt text warps (DrawingML `a:bodyPr/a:prstTxWarp`). -//! -//! A warp preset is a list of bands laid over the shape's text rectangle (insets are ignored). -//! Text lines are shared out over the bands in order (the first ⌈n/k⌉ lines to the first band -//! and so on). A band either -//! - stretches its lines between a top and a bottom guide ([`Band::Fill`]): the ink box of the -//! band's lines fills the band vertically (a band whose ink is shorter than the tallest band's -//! keeps the same scale, centred), and horizontally the text is scaled so that the -//! widest band is filled along the mean length of its guides (one scale for the whole text), or -//! - sets its lines at their natural size along one guide ([`Band::Follow`], arches and circles): -//! glyphs keep their size, are placed by arc length (aligned as in the paragraph, the whole -//! guide being the line's width: insets don't count) and stand on -//! the guide's left normal; lines further from the guide stack outwards. Lines that are longer -//! than the guide are shrunk to fit. -//! -//! Positions along a guide are by arc length; a fill band maps the same fraction of its top and -//! bottom guide's length and interpolates between them. The guide curves were derived from -//! observation: synthetic decks of `I` bars were drawn with PowerPoint and every curve fitted to -//! the measured bar ends (most fit within a point on a 420 × 200 pt box). -use kurbo::{Arc, BezPath, PathEl, Point, Rect, Vec2}; - -/// Flattening tolerance for guides, in points. -const TOL: f64 = 0.02; - -/// A guide curve flattened to a polyline with cumulative arc lengths. -#[derive(Clone, Debug, Default)] -pub struct Guide { - pts: Vec, - cum: Vec, - closed: bool, -} - -impl Guide { - fn from_points(raw: impl IntoIterator, closed: bool) -> Guide { - let mut pts: Vec = Vec::new(); - let mut cum: Vec = Vec::new(); - for p in raw { - if !(p.x.is_finite() && p.y.is_finite()) { - continue; - } - match pts.last() { - Some(q) => { - let d = (p - *q).hypot(); - if d > 1e-9 { - cum.push(cum.last().copied().unwrap_or(0.0) + d); - pts.push(p); - } - } - None => { - pts.push(p); - cum.push(0.0); - } - } - if pts.len() > 100_000 { - break; - } - } - Guide { pts, cum, closed } - } - - /// A guide through `path` (any curves), flattened. - pub fn from_path(path: &BezPath, closed: bool) -> Guide { - let mut pts = Vec::new(); - kurbo::flatten(path.iter(), TOL, |el| match el { - PathEl::MoveTo(p) | PathEl::LineTo(p) => pts.push(p), - _ => {} - }); - Guide::from_points(pts, closed) - } - - /// Total arc length. - pub fn length(&self) -> f64 { - self.cum.last().copied().unwrap_or(0.0) - } - - /// Whether the guide is a closed loop (positions past its end wrap around). - pub fn is_closed(&self) -> bool { - self.closed - } - - /// Point and unit tangent at arc length `s`. Open guides continue along their end tangents - /// past either end; closed guides wrap. - pub fn at(&self, s: f64) -> (Point, Vec2) { - let len = self.length(); - let (Some(&first), Some(&last)) = (self.pts.first(), self.pts.last()) else { - return (Point::ZERO, Vec2::new(1.0, 0.0)); - }; - if self.pts.len() < 2 || len <= 1e-9 { - return (first, Vec2::new(1.0, 0.0)); - } - let s = if s.is_finite() { s } else { 0.0 }; - let s = if self.closed { s.rem_euclid(len) } else { s }; - let seg = |i: usize| -> (Point, Point, f64) { - let a = self.pts.get(i).copied().unwrap_or(first); - let b = self.pts.get(i + 1).copied().unwrap_or(last); - (a, b, self.cum.get(i).copied().unwrap_or(0.0)) - }; - let n = self.pts.len(); - let i = if s <= 0.0 { - 0 - } else if s >= len { - n - 2 - } else { - self.cum.partition_point(|c| *c <= s).saturating_sub(1).min(n - 2) - }; - let (a, b, c0) = seg(i); - let d = b - a; - let l = d.hypot(); - let t = if l > 1e-12 { d / l } else { Vec2::new(1.0, 0.0) }; - (a + t * (s - c0), t) - } - - /// The parallel curve `d` points away on the left of the direction of travel (above a - /// guide running left to right). - pub fn offset(&self, d: f64) -> Guide { - let n = self.pts.len(); - if n < 2 || !d.is_finite() || d == 0.0 { - return self.clone(); - } - let unit = |i: usize| -> Vec2 { - let (a, b) = (self.pts.get(i).copied().unwrap_or(Point::ZERO), self.pts.get(i + 1).copied().unwrap_or(Point::ZERO)); - let v = b - a; - let l = v.hypot(); - if l > 1e-12 { v / l } else { Vec2::ZERO } - }; - let pts = (0..n).map(|i| { - let before = if i > 0 { - unit(i - 1) - } else if self.closed { - unit(n - 2) - } else { - Vec2::ZERO - }; - let after = if i + 1 < n { - unit(i) - } else if self.closed { - unit(0) - } else { - Vec2::ZERO - }; - let t = before + after; - let l = t.hypot(); - let t = if l > 1e-12 { t / l } else { Vec2::new(1.0, 0.0) }; - self.pts.get(i).copied().unwrap_or(Point::ZERO) + Vec2::new(t.y, -t.x) * d - }); - Guide::from_points(pts.collect::>(), self.closed) - } - - /// The point at fraction `t` of the length. - pub fn at_frac(&self, t: f64) -> Point { - self.at(t * self.length()).0 - } -} - -/// Which line of a follow band sits on its guide. -#[derive(Clone, Copy, Debug, PartialEq, Eq)] -pub enum LineAnchor { - /// The last line; earlier lines stack outwards (arch up, circle). - Last, - /// The first line; later lines stack below it (arch down). - First, - /// The middle of the band's lines. - Middle, -} - -#[derive(Clone, Debug)] -pub enum Band { - /// Text stretched between two guides. - Fill { top: Guide, bottom: Guide }, - /// Text at its natural size along a guide. - Follow { path: Guide, anchor: LineAnchor }, -} - -impl Band { - /// The length text is measured against: the mean of a fill band's guides. - pub fn length(&self) -> f64 { - match self { - Band::Fill { top, bottom } => (top.length() + bottom.length()) / 2.0, - Band::Follow { path, .. } => path.length(), - } - } -} - -/// A resolved warp: its bands in shape-local points. -#[derive(Clone, Debug)] -pub struct Warp { - pub bands: Vec, -} - -/// Presets whose text follows a guide at its natural size (no wrapping). -pub fn is_follow(name: &str) -> bool { - matches!(name, "textArchUp" | "textArchDown" | "textCircle" | "textButton") -} - -/// Default adjust values of a warp preset (`adj`, or `adj1`, `adj2`); empty for unknown presets. -pub fn adjust_defaults(name: &str) -> &'static [f64] { - match name { - "textPlain" => &[50_000.0], - "textStop" => &[25_000.0], - "textTriangle" | "textTriangleInverted" => &[50_000.0], - "textChevron" => &[25_000.0], - "textChevronInverted" => &[75_000.0], - "textRingInside" | "textRingOutside" => &[60_000.0], - "textArchUp" | "textCircle" | "textButton" => &[10_800_000.0], - "textArchDown" => &[0.0], - "textArchUpPour" | "textCirclePour" | "textButtonPour" => &[10_800_000.0, 50_000.0], - "textArchDownPour" => &[0.0, 25_000.0], - "textCurveUp" | "textCurveDown" => &[45_977.0], - "textCanUp" => &[85_000.0], - "textCanDown" => &[14_286.0], - "textWave1" | "textWave2" => &[12_500.0, 0.0], - "textDoubleWave1" | "textWave4" => &[6_250.0, 0.0], - "textInflate" | "textDeflate" => &[18_750.0], - "textInflateBottom" => &[60_000.0], - "textDeflateBottom" | "textDeflateTop" => &[50_000.0], - "textInflateTop" => &[40_000.0], - "textDeflateInflate" => &[35_000.0], - "textDeflateInflateDeflate" => &[25_000.0], - "textFadeRight" | "textFadeLeft" | "textFadeUp" | "textFadeDown" => &[33_333.0], - "textSlantUp" => &[55_556.0], - "textSlantDown" => &[44_444.0], - "textCascadeUp" | "textCascadeDown" => &[44_444.0], - _ => &[], - } -} - -/// Number of adjust values a warp preset takes. -pub fn adjust_count(name: &str) -> usize { - adjust_defaults(name).len() -} - -/// Whether `name` is a warp preset DeckCraft draws. -pub fn is_supported(name: &str) -> bool { - !adjust_defaults(name).is_empty() -} - -/// One DrawingML text-warp preset, in gallery order. -pub struct Preset { - /// `prstTxWarp` value, e.g. `textArchUp`. - pub id: &'static str, - /// Name shown on the Transform gallery tile. - pub label: &'static str, -} - -/// The 40 presets DeckCraft draws, Follow Path first, then Warp. -pub const CATALOG: &[Preset] = &[ - Preset { id: "textArchUp", label: "Arch Up" }, - Preset { id: "textArchDown", label: "Arch Down" }, - Preset { id: "textCircle", label: "Circle" }, - Preset { id: "textButton", label: "Button" }, - Preset { id: "textPlain", label: "Plain" }, - Preset { id: "textStop", label: "Stop" }, - Preset { id: "textTriangle", label: "Triangle" }, - Preset { id: "textTriangleInverted", label: "Inverted Triangle" }, - Preset { id: "textChevron", label: "Chevron" }, - Preset { id: "textChevronInverted", label: "Inverted Chevron" }, - Preset { id: "textRingInside", label: "Ring Inside" }, - Preset { id: "textRingOutside", label: "Ring Outside" }, - Preset { id: "textArchUpPour", label: "Arch Up Pour" }, - Preset { id: "textArchDownPour", label: "Arch Down Pour" }, - Preset { id: "textCirclePour", label: "Circle Pour" }, - Preset { id: "textButtonPour", label: "Button Pour" }, - Preset { id: "textCurveUp", label: "Curve Up" }, - Preset { id: "textCurveDown", label: "Curve Down" }, - Preset { id: "textCanUp", label: "Can Up" }, - Preset { id: "textCanDown", label: "Can Down" }, - Preset { id: "textWave1", label: "Wave 1" }, - Preset { id: "textWave2", label: "Wave 2" }, - Preset { id: "textDoubleWave1", label: "Double Wave 1" }, - Preset { id: "textWave4", label: "Wave 4" }, - Preset { id: "textInflate", label: "Inflate" }, - Preset { id: "textDeflate", label: "Deflate" }, - Preset { id: "textInflateBottom", label: "Inflate Bottom" }, - Preset { id: "textDeflateBottom", label: "Deflate Bottom" }, - Preset { id: "textInflateTop", label: "Inflate Top" }, - Preset { id: "textDeflateTop", label: "Deflate Top" }, - Preset { id: "textDeflateInflate", label: "Deflate Inflate" }, - Preset { id: "textDeflateInflateDeflate", label: "Deflate Inflate Deflate" }, - Preset { id: "textFadeRight", label: "Fade Right" }, - Preset { id: "textFadeLeft", label: "Fade Left" }, - Preset { id: "textFadeUp", label: "Fade Up" }, - Preset { id: "textFadeDown", label: "Fade Down" }, - Preset { id: "textSlantUp", label: "Slant Up" }, - Preset { id: "textSlantDown", label: "Slant Down" }, - Preset { id: "textCascadeUp", label: "Cascade Up" }, - Preset { id: "textCascadeDown", label: "Cascade Down" }, -]; - -/// A yellow adjust handle for one warp guide value. `pos` is in the same space as `rect` -/// (shape-local points). Dragging projects the pointer onto the handle's axis, or around the -/// text rectangle's centre for an angle. -#[derive(Clone, Copy, Debug, PartialEq)] -pub struct WarpHandle { - pub index: usize, - pub pos: Point, - kind: HandleKind, -} - -#[derive(Clone, Copy, Debug, PartialEq)] -enum HandleKind { - /// `pos = origin + dir * raw`. `value_at` projects onto that line and clamps. - Line { origin: Point, dir: Vec2, min: f64, max: f64 }, - /// Angle about `center` (y down, 0° at +x). `invert` is arch-down, whose guide angle is `180° − adj`. - Angle { center: Point, invert: bool }, -} - -impl WarpHandle { - /// The raw guide value (`adj` / `adjN`) for a pointer at `p`. - pub fn value_at(&self, p: Point) -> f64 { - match self.kind { - HandleKind::Line { origin, dir, min, max } => { - let l2 = dir.hypot2(); - if l2 < 1e-18 || !(p.x.is_finite() && p.y.is_finite()) { - return min; - } - let v = (p - origin).dot(dir) / l2; - if !v.is_finite() { - return min; - } - let (lo, hi) = (min.min(max), max.max(min)); - v.clamp(lo, hi).round() - } - HandleKind::Angle { center, invert } => { - let d = p - center; - if !(d.x.is_finite() && d.y.is_finite()) || d.hypot() < 1e-9 { - return 0.0; - } - let mut deg = d.y.atan2(d.x).to_degrees(); - if invert { - deg = 180.0 - deg; - } - (deg.rem_euclid(360.0) * 60_000.0).round() - } - } - } -} - -fn stored_raw(adj: &[f64], defaults: &[f64], i: usize) -> f64 { - adj.get(i).copied().filter(|v| v.is_finite()).or_else(|| defaults.get(i).copied()).unwrap_or(0.0) -} - -fn unit(rect: Rect, u: f64, v: f64) -> Point { - Point::new(rect.x0 + u * rect.width(), rect.y0 + v * rect.height()) -} - -/// A fraction handle: unit position `(x, sign * frac)`, raw = frac × 100 000, clamped to `lo..=hi`. -fn frac_handle(rect: Rect, index: usize, x: f64, frac: f64, lo: f64, hi: f64, sign: f64) -> WarpHandle { - let frac = frac.clamp(lo, hi); - WarpHandle { - index, - pos: unit(rect, x, sign * frac), - kind: HandleKind::Line { - origin: unit(rect, x, 0.0), - dir: Vec2::new(0.0, sign * rect.height() / 100_000.0), - min: lo * 100_000.0, - max: hi * 100_000.0, - }, - } -} - -/// A fraction handle that slides horizontally: unit `(frac, y)`. -fn frac_x_handle(rect: Rect, index: usize, y: f64, frac: f64, lo: f64, hi: f64) -> WarpHandle { - let frac = frac.clamp(lo, hi); - WarpHandle { - index, - pos: unit(rect, frac, y), - kind: HandleKind::Line { - origin: unit(rect, 0.0, y), - dir: Vec2::new(rect.width() / 100_000.0, 0.0), - min: lo * 100_000.0, - max: hi * 100_000.0, - }, - } -} - -/// Angle handle, inset from the ellipse so it doesn't sit on a resize handle. -fn angle_handle(rect: Rect, index: usize, deg: f64, invert: bool) -> WarpHandle { - let geom = if invert { 180.0 - deg } else { deg }; - let rad = geom.to_radians(); - let c = rect.center(); - WarpHandle { - index, - pos: Point::new(c.x + rect.width() * 0.36 * rad.cos(), c.y + rect.height() * 0.36 * rad.sin()), - kind: HandleKind::Angle { center: c, invert }, - } -} - -/// Inner-ellipse radius (pour presets): the handle sits on the downward point of that ellipse. -fn radius_handle(rect: Rect, r: f64) -> WarpHandle { - let r = r.clamp(0.0, 0.99); - WarpHandle { - index: 1, - pos: unit(rect, 0.5, 0.5 + 0.5 * r), - kind: HandleKind::Line { origin: unit(rect, 0.5, 0.5), dir: Vec2::new(0.0, 0.5 * rect.height() / 100_000.0), min: 0.0, max: 99_000.0 }, - } -} - -/// Wave phase: slides sideways around the middle of the lower half. -fn shift_handle(rect: Rect, s: f64) -> WarpHandle { - let s = s.clamp(-0.1, 0.1); - WarpHandle { - index: 1, - pos: unit(rect, 0.5 + s, 0.78), - kind: HandleKind::Line { origin: unit(rect, 0.5, 0.78), dir: Vec2::new(rect.width() / 100_000.0, 0.0), min: -10_000.0, max: 10_000.0 }, - } -} - -/// Yellow handles for warp `name` over text rectangle `rect`. Empty when `name` isn't a drawn -/// preset or `rect` isn't a usable box. Missing adjust values take the preset defaults. -pub fn handles(name: &str, adj: &[f64], rect: Rect) -> Vec { - if ![rect.x0, rect.y0, rect.x1, rect.y1].iter().all(|v| v.is_finite()) { - return Vec::new(); - } - let rect = Rect::new(rect.x0.min(rect.x1), rect.y0.min(rect.y1), rect.x0.max(rect.x1), rect.y0.max(rect.y1)); - if rect.width() < 1e-3 || rect.height() < 1e-3 { - return Vec::new(); - } - let defaults = adjust_defaults(name); - if defaults.is_empty() { - return Vec::new(); - } - let raw = |i| stored_raw(adj, defaults, i); - let frac = |i| raw(i) / 100_000.0; - let deg = |i| (raw(i) / 60_000.0).rem_euclid(360.0); - let y = |out: &mut Vec, x, lo, hi, sign| out.push(frac_handle(rect, 0, x, frac(0), lo, hi, sign)); - let xh = |out: &mut Vec, yy, lo, hi| out.push(frac_x_handle(rect, 0, yy, frac(0), lo, hi)); - let mut out = Vec::with_capacity(defaults.len()); - match name { - "textPlain" => xh(&mut out, 0.28, 0.3, 0.7), - "textStop" => y(&mut out, 0.5, 0.14286, 0.5, 1.0), - "textTriangle" | "textTriangleInverted" => y(&mut out, 0.18, 0.0, 1.0, 1.0), - "textChevron" => y(&mut out, 0.18, 0.0, 0.5, 1.0), - "textChevronInverted" => y(&mut out, 0.18, 0.5, 1.0, 1.0), - "textFadeRight" => y(&mut out, 0.82, 0.0, 0.49999, 1.0), - "textFadeLeft" => y(&mut out, 0.18, 0.0, 0.49999, 1.0), - "textFadeUp" => xh(&mut out, 0.22, 0.0, 0.49999), - "textFadeDown" => xh(&mut out, 0.78, 0.0, 0.49999), - "textSlantUp" => y(&mut out, 0.18, 0.44444, 1.0, 1.0), - "textSlantDown" => y(&mut out, 0.18, 0.0, 0.55556, 1.0), - "textCascadeUp" => y(&mut out, 0.82, 0.0, 1.0, 1.0), - "textCascadeDown" => y(&mut out, 0.18, 0.0, 1.0, 1.0), - "textInflate" => y(&mut out, 0.62, 0.0, 0.2, -1.0), - "textDeflate" => y(&mut out, 0.62, 0.0, 0.375, 1.0), - "textInflateBottom" => y(&mut out, 0.62, 0.6, 1.0, 1.0), - "textDeflateBottom" => y(&mut out, 0.62, 0.0625, 1.0, 1.0), - "textInflateTop" => y(&mut out, 0.62, 0.0, 0.5, 1.0), - "textDeflateTop" => y(&mut out, 0.62, 0.0, 0.9375, 1.0), - "textDeflateInflate" => y(&mut out, 0.5, 0.05, 0.95, 1.0), - "textDeflateInflateDeflate" => y(&mut out, 0.5, 0.01, 1.0 / 3.0, 1.0), - "textCurveUp" | "textCurveDown" => y(&mut out, 0.18, 0.0, 0.56818, 1.0), - "textCanUp" => y(&mut out, 0.62, 0.5, 1.0, 1.0), - "textCanDown" => y(&mut out, 0.62, 0.0, 0.5, 1.0), - "textRingInside" | "textRingOutside" => y(&mut out, 0.5, 0.5, 0.99, 1.0), - "textArchUp" | "textCircle" | "textButton" => out.push(angle_handle(rect, 0, deg(0), false)), - "textArchDown" => out.push(angle_handle(rect, 0, deg(0), true)), - "textArchUpPour" | "textCirclePour" | "textButtonPour" => { - out.push(angle_handle(rect, 0, deg(0), false)); - out.push(radius_handle(rect, frac(1))); - } - "textArchDownPour" => { - out.push(angle_handle(rect, 0, deg(0), true)); - out.push(radius_handle(rect, frac(1))); - } - "textWave1" | "textWave2" => { - y(&mut out, 0.32, 0.0, 0.2, 1.0); - out.push(shift_handle(rect, frac(1))); - } - "textDoubleWave1" | "textWave4" => { - y(&mut out, 0.32, 0.0, 0.125, 1.0); - out.push(shift_handle(rect, frac(1))); - } - _ => return Vec::new(), - } - out -} - -/// Segments of a guide in unit coordinates (x, y in 0..1 over the text rectangle). -#[derive(Clone, Copy, Debug)] -enum Seg { - M(f64, f64), - L(f64, f64), - Q(f64, f64, f64, f64), - C(f64, f64, f64, f64, f64, f64), - /// Elliptical arc: centre, radii, start and sweep in degrees (y down: positive = clockwise). - A(f64, f64, f64, f64, f64, f64), -} - -enum Spec { - Fill(Vec, Vec), - Follow(Vec, LineAnchor), -} - -struct Adj<'a> { - raw: &'a [f64], - defaults: &'static [f64], -} - -impl Adj<'_> { - fn raw(&self, i: usize) -> f64 { - self.raw.get(i).copied().filter(|v| v.is_finite()).or_else(|| self.defaults.get(i).copied()).unwrap_or(0.0) - } - /// Adjust `i` as a fraction (1/100 000), pinned to `lo..=hi` (fractions). - fn frac(&self, i: usize, lo: f64, hi: f64) -> f64 { - (self.raw(i) / 100_000.0).clamp(lo, hi) - } - /// Adjust `i` as an angle in degrees (1/60 000), in 0..360. - fn angle(&self, i: usize) -> f64 { - (self.raw(i) / 60_000.0).rem_euclid(360.0) - } -} - -fn line(pts: &[(f64, f64)]) -> Vec { - pts.iter().enumerate().map(|(i, &(x, y))| if i == 0 { Seg::M(x, y) } else { Seg::L(x, y) }).collect() -} - -/// Quadratic from (0, y0) through control (0.5, c) to (1, y0). -fn quad(y0: f64, c: f64) -> Vec { - vec![Seg::M(0.0, y0), Seg::Q(0.5, c, 1.0, y0)] -} - -/// A sweep in (0, 360]: zero means a full turn. -fn turn(deg: f64) -> f64 { - let d = deg.rem_euclid(360.0); - if d < 1e-9 { 360.0 } else { d } -} - -/// Arc of the ellipse inscribed in the rectangle, scaled by `s` about its centre. -fn ellipse(s: f64, start: f64, sweep: f64) -> Vec { - vec![Seg::A(0.5, 0.5, 0.5 * s, 0.5 * s, start, sweep)] -} - -/// The arch-up arc for adjust angle `a`: symmetric about the top (270°), clockwise. -fn arch_up(a: f64) -> (f64, f64) { - (a, turn(2.0 * (270.0 - a))) -} - -/// The arch-down arc for adjust angle `a`: symmetric about the bottom (90°), counter-clockwise. -fn arch_down(a: f64) -> (f64, f64) { - (180.0 - a, -turn(180.0 - 2.0 * a)) -} - -/// The circle arc for adjust angle `a`: from `a` clockwise, symmetric about 0°. -fn circle(a: f64) -> (f64, f64) { - (a, turn(2.0 * (360.0 - a))) -} - -/// One cubic wave period from x0 to x1 at height y: up first when `k` > 0 (y decreases). -fn wave(out: &mut Vec, x0: f64, x1: f64, y: f64, k: f64) { - let l = x1 - x0; - out.push(Seg::C(x0 + l / 3.0, y - k, x0 + 2.0 * l / 3.0, y + k, x1, y)); -} - -/// Wave guides: `periods` cubic waves over the width, shifted apart by `shift` (fraction). -fn waves(a: f64, shift: f64, periods: usize, up_first: bool) -> Spec { - let d = 2.0 * shift; - let (top_x, bot_x) = if d >= 0.0 { ((0.0, 1.0 - d), (d, 1.0)) } else { ((-d, 1.0), (0.0, 1.0 + d)) }; - let k = if up_first { a * 10.0 / 3.0 } else { -a * 10.0 / 3.0 }; - let guide = |(x0, x1): (f64, f64), y: f64| { - let mut v = vec![Seg::M(x0, y)]; - let n = periods.max(1) as f64; - for i in 0..periods.max(1) { - let f = i as f64; - wave(&mut v, x0 + (x1 - x0) * f / n, x0 + (x1 - x0) * (f + 1.0) / n, y, k); - } - v - }; - Spec::Fill(guide(top_x, a), guide(bot_x, 1.0 - a)) -} - -fn spec(name: &str, a: &Adj) -> Option> { - use Seg::*; - let fill = |t: Vec, b: Vec| vec![Spec::Fill(t, b)]; - let top = || line(&[(0.0, 0.0), (1.0, 0.0)]); - let bottom = || line(&[(0.0, 1.0), (1.0, 1.0)]); - Some(match name { - "textPlain" => { - let d = 2.0 * (a.frac(0, 0.3, 0.7) - 0.5); - if d < 0.0 { - fill(line(&[(-d, 0.0), (1.0, 0.0)]), line(&[(0.0, 1.0), (1.0 + d, 1.0)])) - } else { - fill(line(&[(0.0, 0.0), (1.0 - d, 0.0)]), line(&[(d, 1.0), (1.0, 1.0)])) - } - } - "textStop" => { - let y = a.frac(0, 0.14286, 0.5); - let t = 1.0 / 3.0; - fill(line(&[(0.0, y), (t, 0.0), (1.0 - t, 0.0), (1.0, y)]), line(&[(0.0, 1.0 - y), (t, 1.0), (1.0 - t, 1.0), (1.0, 1.0 - y)])) - } - "textTriangle" => { - let y = a.frac(0, 0.0, 1.0); - fill(line(&[(0.0, y), (0.5, 0.0), (1.0, y)]), bottom()) - } - "textTriangleInverted" => { - let y = a.frac(0, 0.0, 1.0); - fill(top(), line(&[(0.0, y), (0.5, 1.0), (1.0, y)])) - } - "textChevron" => { - let y = a.frac(0, 0.0, 0.5); - fill(line(&[(0.0, y), (0.5, 0.0), (1.0, y)]), line(&[(0.0, 1.0), (0.5, 1.0 - y), (1.0, 1.0)])) - } - "textChevronInverted" => { - let y = a.frac(0, 0.5, 1.0); - fill(line(&[(0.0, 0.0), (0.5, 1.0 - y), (1.0, 0.0)]), line(&[(0.0, y), (0.5, 1.0), (1.0, y)])) - } - "textFadeRight" => { - let y = a.frac(0, 0.0, 0.49999); - fill(line(&[(0.0, 0.0), (1.0, y)]), line(&[(0.0, 1.0), (1.0, 1.0 - y)])) - } - "textFadeLeft" => { - let y = a.frac(0, 0.0, 0.49999); - fill(line(&[(0.0, y), (1.0, 0.0)]), line(&[(0.0, 1.0 - y), (1.0, 1.0)])) - } - "textFadeUp" => { - let x = a.frac(0, 0.0, 0.49999); - fill(line(&[(x, 0.0), (1.0 - x, 0.0)]), bottom()) - } - "textFadeDown" => { - let x = a.frac(0, 0.0, 0.49999); - fill(top(), line(&[(x, 1.0), (1.0 - x, 1.0)])) - } - "textSlantUp" => { - let y = a.frac(0, 0.44444, 1.0); - fill(line(&[(0.0, y), (1.0, 0.0)]), line(&[(0.0, 1.0), (1.0, 1.0 - y)])) - } - "textSlantDown" => { - let y = a.frac(0, 0.0, 0.55556); - fill(line(&[(0.0, 0.0), (1.0, 1.0 - y)]), line(&[(0.0, y), (1.0, 1.0)])) - } - "textCascadeUp" => { - let y = a.frac(0, 0.0, 1.0); - fill(line(&[(0.0, (1.0 - y) / 4.0), (1.0, 0.0)]), line(&[(0.0, 1.0), (1.0, y)])) - } - "textCascadeDown" => { - let y = a.frac(0, 0.0, 1.0); - fill(line(&[(0.0, 0.0), (1.0, (1.0 - y) / 4.0)]), line(&[(0.0, y), (1.0, 1.0)])) - } - "textInflate" => { - let y = a.frac(0, 0.0, 0.2); - fill(quad(y, -y), quad(1.0 - y, 1.0 + y)) - } - "textDeflate" => { - let y = a.frac(0, 0.0, 0.375); - fill(quad(0.0, 2.0 * y), quad(1.0, 1.0 - 2.0 * y)) - } - "textInflateBottom" => { - let y = a.frac(0, 0.6, 1.0); - fill(top(), quad(y, 1.0)) - } - "textDeflateBottom" => { - let y = a.frac(0, 0.0625, 1.0); - fill(top(), quad(1.0, 2.0 * y - 1.0)) - } - "textInflateTop" => { - let y = a.frac(0, 0.0, 0.5); - fill(quad(y, 0.0), bottom()) - } - "textDeflateTop" => { - let y = a.frac(0, 0.0, 0.9375); - fill(quad(0.0, 2.0 * y), bottom()) - } - "textDeflateInflate" => { - // The bands are split by a curve from mid-height up to `y`, with a gap of a tenth of - // a band's height. - let y = a.frac(0, 0.05, 0.95); - let g = 0.05; - vec![Spec::Fill(top(), quad(0.5 - g, 2.0 * y - 0.5 - g)), Spec::Fill(quad(0.5 + g, 2.0 * y - 0.5 + g), bottom())] - } - "textDeflateInflateDeflate" => { - let y = a.frac(0, 0.01, 1.0 / 3.0); - let g = 1.0 / 30.0; - let (t1, t2) = (1.0 / 3.0, 2.0 / 3.0); - let (c1, c2) = (2.0 * y - t1, 2.0 * (1.0 - y) - t2); - vec![ - Spec::Fill(top(), quad(t1 - g, c1 - g)), - Spec::Fill(quad(t1 + g, c1 + g), quad(t2 - g, c2 - g)), - Spec::Fill(quad(t2 + g, c2 + g), bottom()), - ] - } - "textCurveUp" | "textCurveDown" => { - let y = a.frac(0, 0.0, 0.56818); - let b = vec![M(0.0, 1.0 - 3.0 * y / 8.0), C(1.0 / 3.0, 1.0 + y / 8.0, 2.0 / 3.0, 1.0 + y / 8.0, 1.0, 1.0 - 3.0 * y / 8.0)]; - let t = if name == "textCurveUp" { - vec![M(0.0, y), C(1.0 / 3.0, 1.25 * y, 2.0 / 3.0, 0.75 * y, 1.0, 0.0)] - } else { - vec![M(0.0, 0.0), C(1.0 / 3.0, 0.75 * y, 2.0 / 3.0, 1.25 * y, 1.0, y)] - }; - fill(t, b) - } - "textCanUp" => { - let r = 1.0 - a.frac(0, 0.5, 1.0); - fill(vec![A(0.5, r, 0.5, r, 180.0, 180.0)], vec![A(0.5, 1.0, 0.5, r, 180.0, 180.0)]) - } - "textCanDown" => { - let r = a.frac(0, 0.0, 0.5); - fill(vec![A(0.5, 0.0, 0.5, r, 180.0, -180.0)], vec![A(0.5, 1.0 - r, 0.5, r, 180.0, -180.0)]) - } - "textRingInside" | "textRingOutside" => { - let h = a.frac(0, 0.5, 0.99); - let sweep = if name == "textRingInside" { 360.0 } else { -360.0 }; - fill(vec![A(0.5, h / 2.0, 0.5, h / 2.0, 180.0, sweep)], vec![A(0.5, 1.0 - h / 2.0, 0.5, h / 2.0, 180.0, sweep)]) - } - "textWave1" => vec![waves(a.frac(0, 0.0, 0.2), a.frac(1, -0.1, 0.1), 1, true)], - "textWave2" => vec![waves(a.frac(0, 0.0, 0.2), a.frac(1, -0.1, 0.1), 1, false)], - "textDoubleWave1" => vec![waves(a.frac(0, 0.0, 0.125), a.frac(1, -0.1, 0.1), 2, true)], - "textWave4" => vec![waves(a.frac(0, 0.0, 0.125), a.frac(1, -0.1, 0.1), 2, false)], - "textArchUp" => { - let (s, w) = arch_up(a.angle(0)); - vec![Spec::Follow(ellipse(1.0, s, w), LineAnchor::Last)] - } - "textArchDown" => { - let (s, w) = arch_down(a.angle(0)); - vec![Spec::Follow(ellipse(1.0, s, w), LineAnchor::First)] - } - "textCircle" => { - let (s, w) = circle(a.angle(0)); - vec![Spec::Follow(ellipse(1.0, s, w), LineAnchor::Last)] - } - "textButton" => { - let t = a.angle(0); - let (s, w) = arch_up(t); - let half = 0.5 * t.to_radians().cos().abs(); - vec![ - Spec::Follow(ellipse(1.0, s, w), LineAnchor::Last), - Spec::Follow(line(&[(0.5 - half, 0.5), (0.5 + half, 0.5)]), LineAnchor::Middle), - Spec::Follow(ellipse(1.0, 360.0 - s, -w), LineAnchor::First), - ] - } - "textArchUpPour" => { - let (s, w) = arch_up(a.angle(0)); - let r = a.frac(1, 0.0, 0.99); - fill(ellipse(1.0, s, w), ellipse(r, s, w)) - } - "textArchDownPour" => { - let (s, w) = arch_down(a.angle(0)); - let r = a.frac(1, 0.0, 0.99); - fill(ellipse(r, s, w), ellipse(1.0, s, w)) - } - "textCirclePour" => { - let (s, w) = circle(a.angle(0)); - let r = a.frac(1, 0.0, 0.99); - fill(ellipse(1.0, s, w), ellipse(r, s, w)) - } - "textButtonPour" => { - let (s, w) = arch_up(a.angle(0)); - let r = a.frac(1, 0.0, 0.99); - // The middle band runs between chords of the inner ellipse halfway to its top and - // bottom. - let (dy, half) = (0.25 * r, 0.25 * r * 3f64.sqrt()); - vec![ - Spec::Fill(ellipse(1.0, s, w), ellipse(r, s, w)), - Spec::Fill(line(&[(0.5 - half, 0.5 - dy), (0.5 + half, 0.5 - dy)]), line(&[(0.5 - half, 0.5 + dy), (0.5 + half, 0.5 + dy)])), - Spec::Fill(ellipse(r, 360.0 - s, -w), ellipse(1.0, 360.0 - s, -w)), - ] - } - _ => return None, - }) -} - -/// Build a guide from unit-space segments mapped onto `r`. -fn guide(segs: &[Seg], r: Rect) -> Guide { - let mut p = BezPath::new(); - let mut started = false; - let mut closed = false; - for s in segs { - match *s { - Seg::M(x, y) => { - p.move_to((x, y)); - started = true; - } - Seg::L(x, y) => { - if started { - p.line_to((x, y)) - } else { - p.move_to((x, y)) - } - started = true; - } - Seg::Q(cx, cy, x, y) => { - if started { - p.quad_to((cx, cy), (x, y)); - } - } - Seg::C(x1, y1, x2, y2, x, y) => { - if started { - p.curve_to((x1, y1), (x2, y2), (x, y)); - } - } - Seg::A(cx, cy, rx, ry, start, sweep) => { - let arc = Arc::new((cx, cy), (rx.max(0.0), ry.max(0.0)), start.to_radians(), sweep.to_radians(), 0.0); - let s0 = Point::new(cx + rx * start.to_radians().cos(), cy + ry * start.to_radians().sin()); - if started { - p.line_to(s0); - } else { - p.move_to(s0); - } - started = true; - for el in arc.append_iter(1e-5) { - p.push(el); - } - closed = sweep.abs() >= 359.999; - } - } - } - let m = kurbo::Affine::new([r.width(), 0.0, 0.0, r.height(), r.x0, r.y0]); - p.apply_affine(m); - Guide::from_path(&p, closed) -} - -/// The warp `name` with adjust values `adj` (raw guide values; missing ones take the defaults) -/// over text rectangle `rect`. `None` for unknown presets, `textNoShape` or a non-finite rect. -pub fn warp(name: &str, adj: &[f64], rect: Rect) -> Option { - if ![rect.x0, rect.y0, rect.x1, rect.y1].iter().all(|v| v.is_finite()) { - return None; - } - let r = Rect::new(rect.x0.min(rect.x1), rect.y0.min(rect.y1), rect.x0.max(rect.x1), rect.y0.max(rect.y1)); - let a = Adj { raw: adj, defaults: adjust_defaults(name) }; - let specs = spec(name, &a)?; - let bands = specs - .into_iter() - .map(|s| match s { - Spec::Fill(t, b) => Band::Fill { top: guide(&t, r), bottom: guide(&b, r) }, - Spec::Follow(p, anchor) => Band::Follow { path: guide(&p, r), anchor }, - }) - .collect(); - Some(Warp { bands }) -} - -/// The band line `line` of `lines` goes to when there are `bands` bands: the first ⌈n/k⌉ lines -/// share the first band, and so on. -pub fn band_of_line(line: usize, lines: usize, bands: usize) -> usize { - if bands <= 1 || lines == 0 { - return 0; - } - // Band b holds lines ceil(b·n/k) .. ceil((b+1)·n/k). - (0..bands).rev().find(|&b| (b * lines).div_ceil(bands) <= line).unwrap_or(0) -} - -/// One laid-out line as the warp sees it (layout coordinates, points). -#[derive(Clone, Copy, Debug)] -pub struct WarpLine { - /// Ink box of the line's glyphs; `None` for a line without ink. - pub ink: Option, - /// Advance extent of the line (left, right). - pub extent: (f64, f64), - /// Reference height for follow bands: the y that sits on the guide. - pub ref_y: f64, -} - -#[derive(Clone, Copy, Debug)] -enum LineMap { - Fill { - band: usize, - cx: f64, - k: f64, - len: f64, - y0: f64, - y1: f64, - }, - /// `guide`: the line's own parallel guide in [`Mapper::offsets`], if it is off the band's. - Follow { - band: usize, - guide: Option, - e0: f64, - s0: f64, - k: f64, - ref_y: f64, - }, -} - -/// Maps points of laid-out lines onto a warp. -#[derive(Clone, Debug)] -pub struct Mapper<'a> { - warp: &'a Warp, - lines: Vec, - offsets: Vec, - zoom: f64, -} - -impl Warp { - /// Plan the mapping of `lines`, laid out in the inner text box `inner` (the line's place in - /// it gives its alignment along follow guides; the insets themselves don't shorten a guide). - pub fn mapper(&self, lines: &[WarpLine], inner: Rect) -> Mapper<'_> { - let nb = self.bands.len().max(1); - let n = lines.len(); - let band_of: Vec = (0..n).map(|i| band_of_line(i, n, nb).min(nb - 1)).collect(); - // Ink of the whole text, for the shared horizontal centre and scale of fill bands. - let ink_all = lines.iter().filter_map(|l| l.ink).reduce(|a, b| a.union(b)); - let cx = ink_all.map(|r| r.center().x).unwrap_or(0.0); - let mut k_fill = f64::INFINITY; - let mut zoom: f64 = 1.0; - let mut band_y: Vec> = vec![None; nb]; - for (i, l) in lines.iter().enumerate() { - let Some(r) = l.ink else { continue }; - let b = band_of.get(i).copied().unwrap_or(0); - if let Some(slot) = band_y.get_mut(b) { - *slot = Some(match *slot { - Some((y0, y1)) => (y0.min(r.y0), y1.max(r.y1)), - None => (r.y0, r.y1), - }); - } - } - // Every fill band maps a box as tall as the tallest band's ink, centred on its own ink, so - // a band with fewer lines keeps them at the same size, centred between its guides. - let tallest = band_y.iter().flatten().map(|(y0, y1)| y1 - y0).fold(0.0, f64::max); - let band_y: Vec> = - band_y.iter().map(|r| r.map(|(y0, y1)| ((y0 + y1 - tallest) / 2.0, (y0 + y1 + tallest) / 2.0))).collect(); - for (b, band) in self.bands.iter().enumerate() { - if let Band::Fill { top, bottom } = band { - let half = lines - .iter() - .enumerate() - .filter(|(i, _)| band_of.get(*i) == Some(&b)) - .filter_map(|(_, l)| l.ink) - .map(|r| (r.x0 - cx).abs().max((r.x1 - cx).abs())) - .fold(0.0, f64::max); - if half > 1e-9 { - k_fill = k_fill.min(band.length() / (2.0 * half)); - } - if let Some(Some((y0, y1))) = band_y.get(b) { - let thick = [0.0, 0.25, 0.5, 0.75, 1.0].iter().map(|&u| (top.at_frac(u) - bottom.at_frac(u)).hypot()).fold(0.0, f64::max); - if y1 - y0 > 1e-9 { - zoom = zoom.max(thick / (y1 - y0)); - } - } - } - } - if !k_fill.is_finite() { - k_fill = 1.0; - } - zoom = zoom.max(k_fill); - // Per band, measured once: its widest line and its first and last lines' baselines. - let mut stats: Vec> = vec![None; nb]; - for (l, &b) in lines.iter().zip(&band_of) { - let w = l.extent.1 - l.extent.0; - if let Some(slot) = stats.get_mut(b) { - match slot { - Some((widest, _, last)) => { - *widest = widest.max(w); - *last = l.ref_y; - } - None => *slot = Some((0.0f64.max(w), l.ref_y, l.ref_y)), - } - } - } - let mut maps = Vec::with_capacity(n); - let mut offsets = Vec::new(); - for (i, l) in lines.iter().enumerate() { - let b = band_of.get(i).copied().unwrap_or(0); - let band = stats.get(b).copied().flatten(); - match self.bands.get(b) { - Some(Band::Fill { .. }) | None => { - let (y0, y1) = band_y.get(b).copied().flatten().unwrap_or((0.0, 1.0)); - let len = self.bands.get(b).map(Band::length).unwrap_or(0.0); - maps.push(LineMap::Fill { band: b, cx, k: k_fill, len, y0, y1 }); - } - Some(Band::Follow { path, anchor }) => { - let len = path.length(); - let widest = band.map_or(0.0, |s| s.0); - let k = if widest > len && widest > 1e-9 { len / widest } else { 1.0 }; - let ref_y = match anchor { - LineAnchor::Last => band.map(|s| s.2), - LineAnchor::First => band.map(|s| s.1), - LineAnchor::Middle => band.map(|s| (s.1 + s.2) / 2.0), - } - .unwrap_or(l.ref_y); - // Lines off the guide run on a parallel curve at their natural length. - let d = (ref_y - l.ref_y) * k; - let (guide, len) = if d.abs() > 1e-6 && d.is_finite() && offsets.len() < 4096 { - let g = path.offset(d); - let len = g.length(); - offsets.push(g); - (Some(offsets.len() - 1), len) - } else { - (None, len) - }; - let (e0, e1) = l.extent; - let w = (e1 - e0).max(0.0) * k; - let (gl, gr) = ((e0 - inner.x0).max(0.0), (inner.x1 - e1).max(0.0)); - let f = if gl + gr > 1e-9 { gl / (gl + gr) } else { 0.5 }; - let s0 = f * (len - w); - maps.push(LineMap::Follow { band: b, guide, e0, s0, k, ref_y: l.ref_y }); - } - } - } - Mapper { warp: self, lines: maps, offsets, zoom: if zoom.is_finite() { zoom.clamp(1.0, 1.0e4) } else { 1.0 } } - } -} - -impl Mapper<'_> { - /// How much the warp magnifies text at most (for flattening tolerances), ≥ 1. - pub fn zoom(&self) -> f64 { - self.zoom - } - - /// Map point `p` of line `line` (layout coordinates) onto the warp. - pub fn map(&self, line: usize, p: Point) -> Point { - let out = match self.lines.get(line) { - Some(&LineMap::Fill { band, cx, k, len, y0, y1 }) => { - let Some(Band::Fill { top, bottom }) = self.warp.bands.get(band) else { return p }; - let u = if len > 1e-9 { 0.5 + (p.x - cx) * k / len } else { 0.5 }; - let v = if y1 - y0 > 1e-9 { (p.y - y0) / (y1 - y0) } else { 0.5 }; - let (t, b) = (top.at_frac(u), bottom.at_frac(u)); - t.lerp(b, v) - } - Some(&LineMap::Follow { band, guide, e0, s0, k, ref_y }) => { - let path = match (guide.and_then(|g| self.offsets.get(g)), self.warp.bands.get(band)) { - (Some(g), _) => g, - (None, Some(Band::Follow { path, .. })) => path, - _ => return p, - }; - let s = s0 + (p.x - e0) * k; - let d = (ref_y - p.y) * k; - let (q, t) = path.at(s); - q + Vec2::new(t.y, -t.x) * d - } - None => p, - }; - if out.x.is_finite() && out.y.is_finite() { out } else { p } - } -} - -#[cfg(test)] -mod tests; diff --git a/crates/geom/src/warp/tests.rs b/crates/geom/src/warp/tests.rs deleted file mode 100644 index c4aa1bbd0..000000000 --- a/crates/geom/src/warp/tests.rs +++ /dev/null @@ -1,338 +0,0 @@ -use super::{ - Band, BezPath, CATALOG, Guide, Point, Rect, WarpLine, adjust_count, adjust_defaults, band_of_line, handles, is_follow, is_supported, warp, -}; - -const W: f64 = 420.0; -const H: f64 = 200.0; - -fn rect() -> Rect { - Rect::new(0.0, 0.0, W, H) -} - -/// One line whose ink box is `ink`. -fn one_line(ink: Rect) -> Vec { - vec![WarpLine { ink: Some(ink), extent: (ink.x0, ink.x1), ref_y: ink.y1 }] -} - -/// Where the unit-square point (u, v) of a single line's ink box lands, in unit coordinates. -fn land(name: &str, adj: &[f64], u: f64, v: f64) -> (f64, f64) { - let w = warp(name, adj, rect()).unwrap(); - let ink = Rect::new(100.0, 50.0, 300.0, 90.0); - let lines = one_line(ink); - let m = w.mapper(&lines, rect().inset(-5.0)); - let p = m.map(0, Point::new(ink.x0 + u * ink.width(), ink.y0 + v * ink.height())); - (p.x / W, p.y / H) -} - -fn close(a: (f64, f64), b: (f64, f64), tol: f64) -> bool { - (a.0 - b.0).abs() <= tol && (a.1 - b.1).abs() <= tol -} - -#[track_caller] -fn corners(name: &str, adj: &[f64], tl: (f64, f64), tr: (f64, f64), bl: (f64, f64), br: (f64, f64)) { - for ((u, v), want) in [((0.0, 0.0), tl), ((1.0, 0.0), tr), ((0.0, 1.0), bl), ((1.0, 1.0), br)] { - let got = land(name, adj, u, v); - assert!(close(got, want, 0.004), "{name} corner ({u},{v}): got {got:?}, want {want:?}"); - } -} - -#[test] -fn catalog_is_the_forty_drawn_presets() { - assert_eq!(CATALOG.len(), 40); - let mut seen = std::collections::BTreeSet::new(); - for p in CATALOG { - assert!(seen.insert(p.id), "duplicate {}", p.id); - assert!(!p.label.is_empty(), "{}", p.id); - assert!(is_supported(p.id), "{}", p.id); - assert_eq!(is_follow(p.id), matches!(p.id, "textArchUp" | "textArchDown" | "textCircle" | "textButton"), "{}", p.id); - } -} - -#[test] -fn every_preset_builds_finite_guides() { - for p in CATALOG { - let name = p.id; - assert!(is_supported(name), "{name}"); - let w = warp(name, &[], rect()).unwrap_or_else(|| panic!("{name}")); - assert!(!w.bands.is_empty(), "{name}"); - for b in &w.bands { - let l = b.length(); - assert!(l.is_finite() && l > 10.0, "{name}: band length {l}"); - } - assert_eq!(adjust_count(name), adjust_defaults(name).len()); - } - assert!(warp("textNoShape", &[], rect()).is_none()); - assert!(warp("bogus", &[], rect()).is_none()); - assert!(!is_supported("textNoShape")); -} - -#[test] -fn straight_presets_put_the_ink_corners_on_their_guides() { - corners("textPlain", &[], (0.0, 0.0), (1.0, 0.0), (0.0, 1.0), (1.0, 1.0)); - // A smaller adjust shears the text: the top edge starts 40 % in, the bottom edge ends 60 % in. - corners("textPlain", &[30_000.0], (0.4, 0.0), (1.0, 0.0), (0.0, 1.0), (0.6, 1.0)); - corners("textStop", &[], (0.0, 0.25), (1.0, 0.25), (0.0, 0.75), (1.0, 0.75)); - corners("textTriangle", &[], (0.0, 0.5), (1.0, 0.5), (0.0, 1.0), (1.0, 1.0)); - corners("textTriangleInverted", &[25_000.0], (0.0, 0.0), (1.0, 0.0), (0.0, 0.25), (1.0, 0.25)); - corners("textChevron", &[], (0.0, 0.25), (1.0, 0.25), (0.0, 1.0), (1.0, 1.0)); - corners("textChevronInverted", &[], (0.0, 0.0), (1.0, 0.0), (0.0, 0.75), (1.0, 0.75)); - corners("textFadeRight", &[], (0.0, 0.0), (1.0, 0.33333), (0.0, 1.0), (1.0, 0.66667)); - corners("textFadeLeft", &[], (0.0, 0.33333), (1.0, 0.0), (0.0, 0.66667), (1.0, 1.0)); - corners("textFadeUp", &[], (0.33333, 0.0), (0.66667, 0.0), (0.0, 1.0), (1.0, 1.0)); - corners("textFadeDown", &[], (0.0, 0.0), (1.0, 0.0), (0.33333, 1.0), (0.66667, 1.0)); - corners("textSlantUp", &[], (0.0, 0.55556), (1.0, 0.0), (0.0, 1.0), (1.0, 0.44444)); - corners("textSlantDown", &[], (0.0, 0.0), (1.0, 0.55556), (0.0, 0.44444), (1.0, 1.0)); - corners("textCascadeUp", &[], (0.0, 0.13889), (1.0, 0.0), (0.0, 1.0), (1.0, 0.44444)); - corners("textCascadeDown", &[], (0.0, 0.0), (1.0, 0.13889), (0.0, 0.44444), (1.0, 1.0)); -} - -#[test] -fn curved_presets_bend_where_powerpoint_bends_them() { - corners("textInflate", &[], (0.0, 0.1875), (1.0, 0.1875), (0.0, 0.8125), (1.0, 0.8125)); - assert!(close(land("textInflate", &[], 0.5, 0.0), (0.5, 0.0), 0.004)); - assert!(close(land("textInflate", &[], 0.5, 1.0), (0.5, 1.0), 0.004)); - corners("textDeflate", &[], (0.0, 0.0), (1.0, 0.0), (0.0, 1.0), (1.0, 1.0)); - assert!(close(land("textDeflate", &[], 0.5, 0.0), (0.5, 0.1875), 0.004)); - corners("textInflateBottom", &[], (0.0, 0.0), (1.0, 0.0), (0.0, 0.6), (1.0, 0.6)); - assert!(close(land("textInflateBottom", &[], 0.5, 1.0), (0.5, 0.8), 0.004)); - assert!(close(land("textDeflateBottom", &[], 0.5, 1.0), (0.5, 0.5), 0.004)); - assert!(close(land("textInflateTop", &[], 0.5, 0.0), (0.5, 0.2), 0.004)); - assert!(close(land("textDeflateTop", &[], 0.5, 0.0), (0.5, 0.5), 0.004)); - // Cans: half ellipses. - corners("textCanUp", &[], (0.0, 0.15), (1.0, 0.15), (0.0, 1.0), (1.0, 1.0)); - assert!(close(land("textCanUp", &[], 0.5, 0.0), (0.5, 0.0), 0.004)); - assert!(close(land("textCanUp", &[], 0.5, 1.0), (0.5, 0.85), 0.004)); - assert!(close(land("textCanDown", &[], 0.5, 0.0), (0.5, 0.14286), 0.004)); - // Curves and waves. - let a = 0.45977; - corners("textCurveUp", &[], (0.0, a), (1.0, 0.0), (0.0, 1.0 - 3.0 * a / 8.0), (1.0, 1.0 - 3.0 * a / 8.0)); - assert!(close(land("textCurveUp", &[], 0.5, 1.0), (0.5, 1.0), 0.004)); - corners("textCurveDown", &[], (0.0, 0.0), (1.0, a), (0.0, 1.0 - 3.0 * a / 8.0), (1.0, 1.0 - 3.0 * a / 8.0)); - corners("textWave1", &[], (0.0, 0.125), (1.0, 0.125), (0.0, 0.875), (1.0, 0.875)); - // Wave 1 rises first: its top is near the box top a quarter of the way along. - assert!(land("textWave1", &[], 0.25, 0.0).1 < 0.02); - assert!(land("textWave2", &[], 0.25, 0.0).1 > 0.23); - // A horizontal shift moves the bottom guide right. - corners("textWave1", &[12_500.0, 5_000.0], (0.0, 0.125), (0.9, 0.125), (0.1, 0.875), (1.0, 0.875)); - assert!(land("textDoubleWave1", &[], 0.125, 0.0).1 < 0.02); - assert!(land("textWave4", &[], 0.125, 0.0).1 > 0.1); -} - -#[test] -fn arc_presets_follow_ellipses() { - // Pour arches: the outer arc from the left end over the top; the inner one is scaled by adj2. - corners("textArchUpPour", &[], (0.0, 0.5), (1.0, 0.5), (0.25, 0.5), (0.75, 0.5)); - assert!(close(land("textArchUpPour", &[], 0.5, 0.0), (0.5, 0.0), 0.004)); - assert!(close(land("textArchUpPour", &[], 0.5, 1.0), (0.5, 0.25), 0.004)); - assert!(close(land("textArchUpPour", &[10_800_000.0, 30_000.0], 0.5, 1.0), (0.5, 0.35), 0.004)); - assert!(close(land("textArchDownPour", &[], 0.5, 0.0), (0.5, 0.625), 0.004)); - assert!(close(land("textArchDownPour", &[], 0.5, 1.0), (0.5, 1.0), 0.004)); - // Circle pour: once round from the left; the middle of the text is at the right. - assert!(close(land("textCirclePour", &[], 0.5, 0.0), (1.0, 0.5), 0.004)); - // Rings: the text goes round two stacked ellipses. - assert!(close(land("textRingInside", &[], 0.0, 0.0), (0.0, 0.3), 0.004)); - assert!(close(land("textRingInside", &[], 0.0, 1.0), (0.0, 0.7), 0.004)); - assert!(close(land("textRingInside", &[], 0.25, 0.0), (0.5, 0.0), 0.01)); - assert!(close(land("textRingOutside", &[], 0.25, 1.0), (0.5, 1.0), 0.01)); -} - -#[test] -fn follow_presets_keep_text_size_and_stack_lines_outwards() { - let w = warp("textArchUp", &[], rect()).unwrap(); - // A 40-wide centred line whose reference height is 80. - let line = WarpLine { ink: Some(Rect::new(190.0, 50.0, 230.0, 88.0)), extent: (190.0, 230.0), ref_y: 80.0 }; - let inner = Rect::new(7.2, 3.6, W - 7.2, H - 3.6); - let m = w.mapper(&[line], inner); - // The middle of the reference line lands on the top of the ellipse; 10 pt above it lands - // 10 pt above the top. - let p = m.map(0, Point::new(210.0, 80.0)); - assert!((p.x - 210.0).abs() < 0.05 && p.y.abs() < 0.05, "{p:?}"); - let q = m.map(0, Point::new(210.0, 70.0)); - assert!((q.x - 210.0).abs() < 0.15 && (q.y + 10.0).abs() < 0.05, "{q:?}"); - // Natural size: 40 pt of text spans about 40 pt of arc. - let (a, b) = (m.map(0, Point::new(190.0, 80.0)), m.map(0, Point::new(230.0, 80.0))); - assert!(((b - a).hypot() - 40.0).abs() < 0.5); - // Left-aligned text starts at the very start of the arc: insets don't shorten it. - let left = WarpLine { ink: Some(Rect::new(7.2, 50.0, 47.2, 88.0)), extent: (7.2, 47.2), ref_y: 80.0 }; - let m = w.mapper(&[left], inner); - let p = m.map(0, Point::new(7.2, 80.0)); - assert!(p.x.abs() < 0.01 && (p.y - 100.0).abs() < 0.01, "{p:?}"); - // Two lines on an arch up: the last sits on the arc, the first stacks outside it. - let l1 = WarpLine { ink: Some(Rect::new(190.0, 10.0, 230.0, 40.0)), extent: (190.0, 230.0), ref_y: 34.0 }; - let l2 = WarpLine { ink: Some(Rect::new(190.0, 50.0, 230.0, 80.0)), extent: (190.0, 230.0), ref_y: 74.0 }; - let m = w.mapper(&[l1, l2], inner); - assert!(m.map(1, Point::new(210.0, 74.0)).y.abs() < 0.05); - assert!((m.map(0, Point::new(210.0, 34.0)).y + 40.0).abs() < 0.05); - // Arch down: the first line sits on the bottom of the ellipse. - let w = warp("textArchDown", &[], rect()).unwrap(); - let m = w.mapper(&[l1, l2], inner); - assert!((m.map(0, Point::new(210.0, 34.0)).y - H).abs() < 0.05); - assert!((m.map(1, Point::new(210.0, 74.0)).y - H - 40.0).abs() < 0.05); - // Text longer than the arc is shrunk to fit it. - let w = warp("textArchUp", &[], rect()).unwrap(); - let long = WarpLine { ink: Some(Rect::new(-500.0, 50.0, 900.0, 88.0)), extent: (-500.0, 900.0), ref_y: 80.0 }; - let m = w.mapper(&[long], inner); - let (a, b) = (m.map(0, Point::new(-500.0, 80.0)), m.map(0, Point::new(900.0, 80.0))); - assert!(a.x < 5.0 && b.x > W - 5.0 && (a.y - 100.0).abs() < 10.0 && (b.y - 100.0).abs() < 10.0, "{a:?} {b:?}"); -} - -#[test] -fn lines_share_bands_in_order() { - assert_eq!((0..2).map(|i| band_of_line(i, 2, 2)).collect::>(), [0, 1]); - assert_eq!((0..3).map(|i| band_of_line(i, 3, 2)).collect::>(), [0, 0, 1]); - assert_eq!((0..5).map(|i| band_of_line(i, 5, 2)).collect::>(), [0, 0, 0, 1, 1]); - assert_eq!((0..5).map(|i| band_of_line(i, 5, 3)).collect::>(), [0, 0, 1, 1, 2]); - assert_eq!((0..4).map(|i| band_of_line(i, 4, 3)).collect::>(), [0, 0, 1, 2]); - assert_eq!((0..2).map(|i| band_of_line(i, 2, 3)).collect::>(), [0, 1]); - assert_eq!(band_of_line(0, 1, 3), 0); - assert_eq!(band_of_line(7, 9, 1), 0); - assert_eq!(band_of_line(0, 0, 3), 0); -} - -#[test] -fn deflate_inflate_maps_each_band_separately() { - let w = warp("textDeflateInflate", &[], rect()).unwrap(); - assert_eq!(w.bands.len(), 2); - let l1 = WarpLine { ink: Some(Rect::new(100.0, 10.0, 300.0, 40.0)), extent: (100.0, 300.0), ref_y: 34.0 }; - let l2 = WarpLine { ink: Some(Rect::new(100.0, 50.0, 300.0, 80.0)), extent: (100.0, 300.0), ref_y: 74.0 }; - let m = w.mapper(&[l1, l2], rect()); - // Band 1 ends at 45 % height on the sides, band 2 starts at 55 %. - assert!((m.map(0, Point::new(100.0, 40.0)).y / H - 0.45).abs() < 0.004); - assert!((m.map(1, Point::new(100.0, 50.0)).y / H - 0.55).abs() < 0.004); - assert!((m.map(1, Point::new(300.0, 80.0)).y / H - 1.0).abs() < 0.004); - // A band with fewer lines keeps them at the size of the fuller band, centred in its band: - // two lines (ink 10..60) in band 1, one line (ink 70..80) in band 2 of three. - let a = WarpLine { ink: Some(Rect::new(100.0, 10.0, 300.0, 30.0)), extent: (100.0, 300.0), ref_y: 28.0 }; - let b = WarpLine { ink: Some(Rect::new(100.0, 40.0, 300.0, 60.0)), extent: (100.0, 300.0), ref_y: 58.0 }; - let c = WarpLine { ink: Some(Rect::new(100.0, 70.0, 300.0, 80.0)), extent: (100.0, 300.0), ref_y: 78.0 }; - let m = w.mapper(&[a, b, c], rect()); - let (top, bot) = (m.map(2, Point::new(200.0, 70.0)).y / H, m.map(2, Point::new(200.0, 80.0)).y / H); - // Band 2 runs from 0.4 to 1 at the centre; the line takes the middle fifth of it. - assert!((top - 0.64).abs() < 0.005 && (bot - 0.76).abs() < 0.005, "{top} {bot}"); - // A shorter first line keeps its share of the width. - let short = WarpLine { ink: Some(Rect::new(150.0, 10.0, 250.0, 40.0)), extent: (150.0, 250.0), ref_y: 34.0 }; - let m = w.mapper(&[short, l2], rect()); - let p = m.map(0, Point::new(150.0, 10.0)); - assert!((p.x / W - 0.25).abs() < 0.01, "{p:?}"); -} - -#[test] -fn guides_extrapolate_and_wrap() { - let mut p = BezPath::new(); - p.move_to((0.0, 0.0)); - p.line_to((10.0, 0.0)); - let g = Guide::from_path(&p, false); - assert!((g.length() - 10.0).abs() < 1e-9); - assert!((g.at(15.0).0.x - 15.0).abs() < 1e-9); - assert!((g.at(-5.0).0.x + 5.0).abs() < 1e-9); - assert!(g.at(f64::NAN).0.x.is_finite()); - let w = warp("textCircle", &[], rect()).unwrap(); - let Some(Band::Follow { path, .. }) = w.bands.first() else { panic!() }; - assert!(path.is_closed()); - let l = path.length(); - let (a, b) = (path.at(5.0).0, path.at(l + 5.0).0); - assert!((a - b).hypot() < 1e-6); - let empty = Guide::default(); - assert_eq!(empty.length(), 0.0); - assert!(empty.at(3.0).0.x.is_finite()); -} - -#[test] -fn hostile_adjusts_and_boxes_stay_finite() { - let adjs: &[&[f64]] = - &[&[], &[f64::NAN, f64::INFINITY], &[f64::NEG_INFINITY, f64::NAN], &[1e300, -1e300], &[-1e9, 1e9], &[0.0, 0.0], &[21_599_999.0, 100_000.0]]; - let rects = [ - Rect::new(0.0, 0.0, 0.0, 0.0), - Rect::new(10.0, 10.0, 10.0, 200.0), - Rect::new(0.0, 0.0, 300.0, 0.0), - Rect::new(100.0, 100.0, -50.0, -20.0), - Rect::new(0.0, 0.0, 1e7, 1e7), - ]; - let lines = [ - WarpLine { ink: Some(Rect::new(0.0, 0.0, 0.0, 0.0)), extent: (0.0, 0.0), ref_y: 0.0 }, - WarpLine { ink: None, extent: (5.0, 5.0), ref_y: 3.0 }, - WarpLine { ink: Some(Rect::new(-1e6, -5.0, 1e6, 5.0)), extent: (-1e6, 1e6), ref_y: 4.0 }, - ]; - for name in CATALOG.iter().map(|p| p.id) { - for adj in adjs { - for r in rects { - let Some(w) = warp(name, adj, r) else { panic!("{name} {adj:?} {r:?}") }; - for b in &w.bands { - assert!(b.length().is_finite()); - } - let m = w.mapper(&lines, r); - assert!(m.zoom().is_finite() && m.zoom() >= 1.0); - let probes = [ - (0, Point::ZERO), - (1, Point::new(5.0, 3.0)), - (2, Point::new(1e6, -5.0)), - (2, Point::new(f64::NAN, 1.0)), - (9, Point::new(1.0, 1.0)), - ]; - for (i, p) in probes { - let q = m.map(i, p); - assert!(q.x.is_finite() || !p.x.is_finite(), "{name} {adj:?} {r:?}: {q:?}"); - assert!(q.y.is_finite(), "{name} {adj:?} {r:?}: {q:?}"); - } - } - } - } - assert!(warp("textPlain", &[], Rect::new(f64::NAN, 0.0, 1.0, 1.0)).is_none()); -} - -#[test] -fn every_preset_has_one_handle_per_adjust() { - let r = rect(); - for name in CATALOG.iter().map(|p| p.id) { - let hs = handles(name, &[], r); - assert_eq!(hs.len(), adjust_count(name), "{name}"); - let defaults = adjust_defaults(name); - for h in &hs { - assert!(h.pos.x.is_finite() && h.pos.y.is_finite(), "{name}"); - let back = h.value_at(h.pos); - let want = defaults[h.index]; - assert!((back - want).abs() <= 1.0, "{name} handle {}: {back} vs {want}", h.index); - } - } - assert!(handles("textNoShape", &[], r).is_empty()); - assert!(handles("textArchUp", &[], Rect::new(0.0, 0.0, f64::NAN, 10.0)).is_empty()); - assert!(handles("textArchUp", &[], Rect::new(0.0, 0.0, 0.0, 0.0)).is_empty()); - // A hostile adjust still places a finite handle on the clamped default. - let hs = handles("textInflate", &[f64::NAN], r); - assert_eq!(hs.len(), 1); - assert!(hs[0].pos.x.is_finite() && hs[0].pos.y.is_finite()); -} - -#[test] -fn arch_and_inflate_handles_follow_the_pointer() { - let r = rect(); - let arch = &handles("textArchUp", &[], r)[0]; - let deg = arch.value_at(Point::new(r.center().x, r.y0)) / 60_000.0; - assert!((deg - 270.0).abs() < 0.5, "{deg}"); - let down = &handles("textArchDown", &[], r)[0]; - // The arch-down handle starts on the left; a pointer at the bottom is 90°, which is adjust 90 - // (guide angle 180 − adj). - let deg = down.value_at(Point::new(r.center().x, r.y1)) / 60_000.0; - assert!((deg - 90.0).abs() < 0.5, "{deg}"); - let inf = &handles("textInflate", &[], r)[0]; - let more = inf.value_at(Point::new(inf.pos.x, r.y0 - 80.0)); - assert!(more > adjust_defaults("textInflate")[0], "{more}"); - assert!((more - 20_000.0).abs() < 1.0, "{more}"); -} - -#[test] -fn many_lines_on_a_follow_band_are_mapped_from_one_measurement() { - // 50,000 lines on an arch: each line's scale and anchor come from the band measured once. - let w = warp("textArchUp", &[], rect()).unwrap(); - let inner = Rect::new(7.2, 3.6, W - 7.2, H - 3.6); - let lines: Vec = (0..50_000) - .map(|i| { - let y = i as f64 * 0.01; - WarpLine { ink: Some(Rect::new(190.0, y, 230.0, y + 1.0)), extent: (190.0, 230.0), ref_y: y + 1.0 } - }) - .collect(); - let m = w.mapper(&lines, inner); - // The last line sits on the arc, as with two lines. - let last = lines.len() - 1; - assert!(m.map(last, Point::new(210.0, lines[last].ref_y)).y.abs() < 0.05); -}